Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 71 views

    FR2375C

    Uploaded by

    Danitsa Fiorella Silvestre Bautista

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    FR2375C

    Uploaded by

    Danitsa Fiorella Silvestre Bautista
    71 views1 page

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    71 views1 page

    FR2375C

    Uploaded by

    Danitsa Fiorella Silvestre Bautista

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Formolene® FR2375C

    Fractional Melt LDPE Resin with no Slip or Antiblock


    Formolene® FR2375C is a low density polyethylene with films exhibiting good stiffness and optical
    properties. Formolene® FR2375C is formulated without slip and antiblock for use in film applications
    offering excellent extrusion processing and very good balance of mechanical and optical properties.

    Formolene® FR2375C meets all requirements of the U.S. Food and Drug Administration as specified in 21
    CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

    Suggested Applications:
    Agricultural Film Collation Shrink Medium Duty Shrink Film
    Blend Partner Freezer Film Shoppers
    Co-Extrusion Lamination Film Form Fill and Seal Packaging

    Nominal Physical Properties:


    TEST
    PROPERTY METHOD UNIT VALUE
    Density D1505 g/cc 0.923
    Melt Index, Condition E, 190C°/2.16 kg D1238 g/10 min 0.75
    Dart Impact D1709 g 180
    Elmendorf Tear Strength D1922 g 350/150*
    Tensile Strength at Break D882 psi 4000/3200*
    Elongation at Break D882 % 310/530*
    Secant Modulus @ 1% D882 psi 35000/40000*
    Gloss (45°) D2457 59
    Haze D1003 % 8.4
    * MD / TD

    Note: Film properties based on 1.97 mil (50 micron) thick film produced using a 7.9 inch (200 mm) die and 39.4 mil
    (1.0 mm) die gap with a 2.5:1 Blow-Up Ratio and temperature profile of 356 - 374°F (180 - 190°C). Actual film
    properties may vary based on extrusion equipment, operating conditions and additive package. Film properties are
    not intended to be used as specifications.
    Published 12/1/2020

    02/20

    You might also like