Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    Borstar FB1200

    Uploaded by

    Jucy A
    Borouge HDPE FB1200

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Borstar FB1200

    Uploaded by

    Jucy A
    16 views3 pages
    Borouge HDPE FB1200

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Borouge HDPE FB1200

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views3 pages

    Borstar FB1200

    Uploaded by

    Jucy A
    Borouge HDPE FB1200

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    PRODUCT DATA SHEET

    POLYETHYLENE
    Borstar® FB1200
    ENHANCED POLYETHYLENE FOR HIGH PERFORMANCE AGRICULTURE FILM APPLICATIONS

    DESCRIPTION
    Borstar®FB1200 is produced using the proprietary Borstar® bimodal technology resulting in easy extrusion
    with superior mechanical properties. Film made from the product exhibits excellent mechanical strength at
    normal as well as low temperature, good sealing properties and superior ESCR. Borstar®FB1200 contains
    antioxidant.

    CAS-No. 25087-34-7

    APPLICATIONS
    Impact modifier Grape Cover Films
    Greenhouse Films Monolayer & co-extrusion films
    Aquaculture and Pond Liners Soft Geomembrane
    Heavy Duty and Wide Width Film Mulch Film
    Compression Packaging Industrial Film
    Silage Film

    KEY FEATURES
    Easy process ability Excellent draw down
    Excellent impact strength – stiffness balance Toughness at low temperature
    Good seal properties Superior ESCR
    Bubble stability Excellent printability

    PHYSICAL PROPERTIES
    Property Typical Value* Test Method
    Density 921 kg/m3 ASTM D 792
    Melt Flow Rate (190°C/2.16kg) 0.17 g/10min ASTM D1238
    Melt Flow Rate (190°C/5.0kg) 0.70 g/10min ASTM D1238
    Melt Flow Rate (190°C/21.6kg) 16 g/10min ASTM D1238
    Melting Temperature 123 °C ISO 11357/03
    Vicat Softening Point A50 (10 N) 100 °C ISO 306
    ESCR – 10% Igepal – F 50% >5000 Hours ASTM D1693-B

    * Typical properties and data should not be used for specification work
    FILM PROPERTIES¹

    Property** Typical Value* Test Method

    Tensile Strength at Break (MD/TD) 62/49 MPa ISO 527-3


    Elongation at Break (MD/TD) 600/770 % ISO 527-3

    Tensile Strength at Yield (TD) 12 MPa ISO 527-3


    Tensile Modulus (1 % Secant) (MD/TD) 250/300 MPa ASTM D 882
    Coefficient of Friction 0.4 ASTM D 1894
    Gloss (60°) 10 ASTM D 2457

    Dart Drop 1200 g ASTM D 1709/A


    Tear Strength (MD/TD) 4/9 N ASTM D 1922
    Puncture Resistance, force 50 N ASTM D 5748
    Puncture Resistance, energy 3.0 J ASTM D 5748
    ¹ Film properties: 40µm, BUR=3:1, FLH=4DD, Die gap 1.2mm
    * Typical properties and data should not be used for specification work **
    The film properties are dependent on extrusion conditions.

    PROCESSING CONDITIONS
    Borstar®FB1200 can be processed in most types of blown film equipment such as LDPE, LLDPE or
    HDPE extruders. The balance of draw down properties and bubble stability is superior to conventional
    LLDPE and LDPE. Thickness of 10 to >2000mm can be processed with good bubble stability. The
    product is well suited for co-extrusion.

    Recommended extrusion temperature is 190 - 210°C. A die gap of 1.0 - 1.8 mm will give the best balance
    between extruder pressure and physical properties in the film. Wider die gap gives higher machine
    direction orientation.

    Borstar®FB1200 provides excellent mechanical properties balance by optimizing film processing


    parameters like Blow up ratio (BUR) and Frost Line Height (FLH). Higher impact strength can be achiev ed
    by raising the FLH. High BUR (>2) also results in improved mechanical properties.

    Recommended processing conditions:

    Melt temperature 190 –220°C


    Die gap 1.0 – 1.8 mm
    FLH 2 - 4 DD
    BUR >2:1
    FOOD CONTACT REGULATIONS
    Borstar®FB1200 fulfils the food contact regulations in most countries. If required, contact your Borouge
    representative for a certificate.

    STORAGE
    This product should be stored in dry conditions at temperature bellow 50°C and protected from UV-light.
    Improper storage can initiate degradation, which results in odour generation and colour changes and can
    have negative effects on physical properties of this product.
    More information on storage can be found in Safety Information Sheet (SIS) for this product.

    SAFETY
    The product is not classified as a hazardous mixture.

    Dust and fines from the product carry a risk of dust explosion. All equipment should be properly earthed.
    Inhalation of dust should be avoided as it may cause irritation of the respiratory system. Small amounts of
    fumes are generated during processing of the product. Proper ventilation is therefore required.

    Please see our Safety Information Sheet (SIS) for details on various aspects of safety, recovery and disposal
    of the product, for more information contact your Borouge representative.

    RECYCLING
    The product is suitable for recycling using modern methods of shredding and cleaning. In-house production
    waste should be kept clean to facilitate direct recycling.

    RELATED DOCUMENTS
    The following related documents are available on request, and represent various aspects on the usability,
    safety, recovery and disposal of the product.

    Safety Information Sheet


    Statement on chemicals, regulations and standards

    STANDARDS
    Borouge is certified to various ISO standards, please refer to Borouge.com for more information.

    DISCLAIMER
    To the best of our knowledge, the information contained herein is accurate and reliable as of the date of publication, however, we do not
    assume any liability whatsoever for the accuracy and completeness of such information.

    Borouge makes no warranties which extend beyond the description contained herein. Nothing herein shall constitute any warranty
    of merchantability or fitness for a particular purpose.
    It is the customer’s responsibility to inspect and test our products in order to satisfy itself as to the suitability of th e products for
    the customer’s particular purpose. The customer is responsible for the appropriate, safe and legal use, processing and handli ng of
    our products.

    No liability can be accepted in respect of the use of Borouge’s products in conjunction with other materials. The information contained herein
    relates exclusively to our products when not used in conjunction with any third party materials.

    Borstar® is a trademark of the Borealis group.


    Feb 2020

    You might also like