Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 111 views

    How To Configure Snom 700/ D7XX Series For 3CX

    Uploaded by

    Riky Fitriadi
    This document provides instructions for configuring snom 700/D7XX IP phone series to work with 3CX v15.5. It outlines four steps: 1) upgrading the phone firmware if needed, 2) factory resetting the phone, 3) provisioning the phone either via plug-and-play on the local network or remotely via RPS server, and 4) additional phone configuration options. It also lists supported phone models and notes limitations for some end-of-life models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    How To Configure Snom 700/ D7XX Series For 3CX

    Uploaded by

    Riky Fitriadi
    111 views5 pages
    This document provides instructions for configuring snom 700/D7XX IP phone series to work with 3CX v15.5. It outlines four steps: 1) upgrading the phone firmware if needed, 2) factory resetting the phone, 3) provisioning the phone either via plug-and-play on the local network or remotely via RPS server, and 4) additional phone configuration options. It also lists supported phone models and notes limitations for some end-of-life models.

    Original Description:

    SNOM

    Original Title

    700_series

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for configuring snom 700/D7XX IP phone series to work with 3CX v15.5. It outlines four steps: 1) upgrading the phone firmware if needed, 2) factory resetting the phone, 3) provisioning the phone either via plug-and-play on the local network or remotely via RPS server, and 4) additional phone configuration options. It also lists supported phone models and notes limitations for some end-of-life models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    111 views5 pages

    How To Configure Snom 700/ D7XX Series For 3CX

    Uploaded by

    Riky Fitriadi
    This document provides instructions for configuring snom 700/D7XX IP phone series to work with 3CX v15.5. It outlines four steps: 1) upgrading the phone firmware if needed, 2) factory resetting the phone, 3) provisioning the phone either via plug-and-play on the local network or remotely via RPS server, and 4) additional phone configuration options. It also lists supported phone models and notes limitations for some end-of-life models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15

    How to configure snom 700/ D7XX Series for 3CX

    This guide applies to v15.5 only.

    On this topic

    Supported Models: snom 700/D7XX series


    snom 700 series
    snom D7XX series
    End of Life
    Step 1: Upgrade to the Required firmware
    Step 2: Factory Reset the IP Phone
    Step 3: Provision the phone
    Local LAN or SBC: Provision via Plug’n’Play
    Remote phones: Provision via RPS server
    Step 4: Extended Phone Configuration
    Known Limitations

    Supported Models: snom 700/D7XX series


    snom 700 series
    ● snom 715

    snom D7XX series


    ● snom D712
    ● snom D715
    ● snom D725
    ● snom D745

    https://www.3cx.com/sip-phones/snom-710-720-760/ 1/5
    2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15

    ● snom D765
    ● snom D785

    End of Life
    ● snom 710 **See Limitations
    ● snom D710 **See Limitations
    ● snom 720 **See Limitations
    ● snom 760 **See Limitations

    Step 1: Upgrade to the Required firmware


    Ensure that the phone is running on the required firmware by 3CX. In case the device needs manual updating
    download the latest distributed required firmware by 3CX here. Read how to check what firmware the phones
    are running on and how to upgrade them in this guide: How to manual upgrade snom IP phones.

    Step 2: Factory Reset the IP Phone


    Before provisioning the IP phone, the phone must be brought back to factory defaults in case the device has
    residual settings of a previous configuration. To reset the device read our How to Factory Reset the snom 7 or
    D7 series phones document.

    Step 3: Provision the phone


    There are several methods to provision a phone:

    ● Plug & Play - For phones on the local LAN or behind the 3CX SBC.
    ● RPS - For phones on remote networks that will connect directly to 3CX and use STUN

    For more information, see “When can I use which provisioning method?”

    Local LAN or SBC: Provision via Plug’n’Play


    1. Connect the phone to the network. A PnP request will be sent automatically to 3CX.
    2. Go to the 3CX Management Console ⇒ “Phones” page. The new phone will be marked in Bold.

    3. Click on the BOLD entry and choose between “Assign Ext” or “Add Ext”, depending on whether
    you want to assign the phone to an existing extension or create a new one.

    https://www.3cx.com/sip-phones/snom-710-720-760/ 2/5
    2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15

    4. All major provisioning settings are pre-populated. If your PBX has multiple network cards, select to
    which network this IP phone is connected.
    5. Click “OK”. The phone will configure automatically and will reboot to finalize the setup.

    Remote phones: Provision via RPS server


    1. Take note of the phone’s MAC address, usually written at the back.
    2. Navigate to the 3CX Management Console ⇒ “Phones” and press “+ Add Phone”.
    3. From the dropdown list select the extension to which this phone must be assigned.
    4. In the next dialog select the Vendor/Model of the phone and enter the device’s MAC address.

    https://www.3cx.com/sip-phones/snom-710-720-760/ 3/5
    2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15

    5. Switch the “Provisioning Method” to “Direct SIP (Stun - Remote)” and click “OK”.

    6. You can make sure that the extension is ready to be configured via RPS by checking the “Event Log”
    from the dashboard:

    If the message appears as a “Warning” follow the instructions outlined in the message and use the Manual
    Link Provisioning method outlined here.

    7. The phone is now ready to be provisioned - you can boot up the phone anywhere in the world with
    access to the internet.
    8. The phone will prompt for username and a password: Enter the extension number as username and
    the voicemail pin as the password.

    https://www.3cx.com/sip-phones/snom-710-720-760/ 4/5
    2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15

    Note: Ensure that the input mode is set to digits (green box).

    Step 4: Extended Phone Configuration


    IP phones can be tweaked to match the user’s needs. Those might be skipped if they are not desired and the
    phone will be rolled out in a default configuration. Also they can be altered at a later stage and changes
    applied via the Management Console → Phones → Select Device → Re-Provision :

    ● IP Phone Configuration Options, configurable per device of the extension


    ● IP Phone BLF/DSS assignment, global for all devices of the extension
    ● IP Phone Vlan management, configurable per device of extension
    ● Customizing the IP Phone background logo

    Known Limitations
    ● Devices with only green BFL LED (snom710, snom715, snomD712) will show monitored extensions in
    idle: ON-Green, ringing: Fast-Flash-Green and talking in Slow-Flash-Green
    ● Sidecar follows indication schema of the main device

    https://www.3cx.com/sip-phones/snom-710-720-760/ 5/5

    You might also like