Interroll Smart Solutions DC Platform: Product Information
Interroll Smart Solutions DC Platform: Product Information
Interroll Smart Solutions DC Platform: Product Information
02/2019
NEW:
Ø Ready for Industry 4.0
48 V Interface
Bus 50/60 with bus interface
mm
Data transparency: Thanks to the new bus interface,
more than 100 parameters can be selected and set. The
bus interface is based on the CANOpen standard and paves the
way for the fully automated world of Industry 4.0. In combination
with the multi-protocol capability of MultiControl BI (for PROFINET,
EtherNet/IP and EtherCAT), this means that users can always
visualize the data and functions on the screen using the PLC or
a web interface. As such, the current operating status, torque
and temperature of each and every drive can be read out.
The built-in service life indicator, for instance, facilitates
preventive maintenance, which can be completed
during quieter periods of operation. This, in turn,
significantly increases the availability and
efficiency of the system.
NEW:
Precision positioning for
robotic applications
The bus interface not only enables the new
RollerDrive EC5000 to read out operating
data, but also facilitates millimeter-accurate
positioning. Automated processes are perfectly
supported and efficiently integrated, without
the need for additional cabling. This makes the
interplay between the conveying technol-
ogy and systems deploying robots or
gripper arms much simpler.
The robust switching-mode power units with IP54 protection rating are installed exactly where the protective Interface to Voltage 24 V DC 24 V DC 24 V DC 24 or 48 V DC
extra-low voltage is needed, rather than in the switch cabinet, allowing for much shorter cable lengths. The EC5000 (DriveControl 2048:
space-saving switching-mode power units in 24 V or 48 V have a 50 percent higher peak output and feature 24 or 48 V DC)
integrated brake chopper, automated power limit and adjustable cable protection. They can also produce Start/stop Only fast and slow No Yes Yes
ramps (DriveControl 2048 with
an integrated analysis of the status, either via LED or a signal cable to the programmable logic controller (PLC). configurable 8 different ramps)
A switch that can be secured against being turned back on allows maintenance work to be carried out on individual
Bus interface MultiControl BI
sections of the conveyor while other sections are still in operation.
50 W version DriveControl 2048 X
I/O connections Zone sensors 0 1 2 4
Compact switching-mode power units
(SegmentControl)
Wide-range input 380 – 480 V AC
Additional 0 1 2 inputs/3 outputs 4 I/Os
Power and top output 960 and 1440 W I/Os (start sensor) (ComControl) (configurable)
Mains frequency 50 – 60 Hz Protection rating IP20 IP20 IP54 IP54
Rated output current 40 A at 24 V AC and 20 A at DriveControl 54: IP54
48 V DC Suitable for deep- DriveControl 54 X X
Rated output voltage 24/48 V DC freeze applications
Ambient temperature –30° C to +40° C * With GatewayControl
24 V 48 V ZPA = zero-pressure accumulation; PLC = programmable logic control; AI = analog interface; BI = bus interface; I/Os = inputs and outputs
Protection rate IP54
• Backward compatibility
• Expert application advice
• All-round service
• Ultimate quality
• Extremely fast lead times
This perfectly compatible range of controls, motor rollers and power units, even in combination with Interroll’s Modular
Conveyor Platform (MCP), offers a unique choice of conveying solutions – from autonomous conveyors that can be
commissioned on a plug-and-play principle and without a PLC, all the way to tailor-made high-performance systems that
can be integrated consistently and transparently into the data universe of Industry 4.0 applications for the purpose of
monitoring in control stations, for preventive maintenance or for other functions.
Find out more at interroll.com or contact us. We look forward to hearing from you!