Cylinder Liner - Install: Disassembly and Assembly
Cylinder Liner - Install: Disassembly and Assembly
Cylinder Liner - Install: Disassembly and Assembly
1 из 3
Shutdown
Previous Screen
i02110914
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 2P-8260 Cylinder Liner Installer 1
C 5P-3975 Rubber Lubricant 1
NOTICE
Keep all parts clean from contaminants.
1. Check the cylinder liner projection. Refer to Testing and Adjusting, "Cylinder Liner Projection
- Inspect".
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 28.11.2007
C-15 Truck Engine 6NZ00001-UP(SEBP3032 - 65) - Document Structure Стр. 2 из 3
Illustration 1 g01004993
3. Apply Tooling (C) on the cylinder block liner bore surfaces and liner seals (3) .
4. Dip filler band (2) in clean engine oil for a moment. Install filler band (2) and install cylinder
liner (1) immediately.
Illustration 2 g01005003
5. Use Tooling (B) to install cylinder liner (1) in the cylinder block. Ensure that any marks in
relation to the cylinder liner projection are in alignment.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 28.11.2007
C-15 Truck Engine 6NZ00001-UP(SEBP3032 - 65) - Document Structure Стр. 3 из 3
Note: Refer to Special Instruction, SEHS9564 for more information about cylinder liner
installation.
End By: Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and
Connecting Rods - Install".
Copyright 1993 - 2007 Caterpillar Inc. Wed Nov 28 19:15:37 UTC+0300 2007
All Rights Reserved.
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 28.11.2007