Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 69 views

    2305-00 Simacrylic Coating

    Uploaded by

    SAEFUDDIN SAEFUDDIN
    Simacrylic Coating is a high build acrylic coating intended for above water areas. It has excellent anti-corrosive properties and can be applied at temperatures down to -10°C. The product has a flat gloss, covers between 5.9-4.4 square meters per liter depending on the thickness applied, and dries within 3-6 hours. It should be applied by airless or air spray equipment and requires a chlorinated rubber or vinyl primer and Simacrylic Finish as preceding and finish coats.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    2305-00 Simacrylic Coating

    Uploaded by

    SAEFUDDIN SAEFUDDIN
    69 views2 pages
    Simacrylic Coating is a high build acrylic coating intended for above water areas. It has excellent anti-corrosive properties and can be applied at temperatures down to -10°C. The product has a flat gloss, covers between 5.9-4.4 square meters per liter depending on the thickness applied, and dries within 3-6 hours. It should be applied by airless or air spray equipment and requires a chlorinated rubber or vinyl primer and Simacrylic Finish as preceding and finish coats.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Simacrylic Coating is a high build acrylic coating intended for above water areas. It has excellent anti-corrosive properties and can be applied at temperatures down to -10°C. The product has a flat gloss, covers between 5.9-4.4 square meters per liter depending on the thickness applied, and dries within 3-6 hours. It should be applied by airless or air spray equipment and requires a chlorinated rubber or vinyl primer and Simacrylic Finish as preceding and finish coats.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    69 views2 pages

    2305-00 Simacrylic Coating

    Uploaded by

    SAEFUDDIN SAEFUDDIN
    Simacrylic Coating is a high build acrylic coating intended for above water areas. It has excellent anti-corrosive properties and can be applied at temperatures down to -10°C. The product has a flat gloss, covers between 5.9-4.4 square meters per liter depending on the thickness applied, and dries within 3-6 hours. It should be applied by airless or air spray equipment and requires a chlorinated rubber or vinyl primer and Simacrylic Finish as preceding and finish coats.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Product

    Data Sheet

    SIMACRYLIC COATING
    2305 - 00
    A - two page issue January 2008

    DESCRIPTION
    High build acrylic coating

    PRINCIPAL CHARACTERISTICS
    - Build coat for above water areas
    - Excellent anti corrosive properties
    - Resistant to splash of mild chemicals
    - Fast drying
    - Can be applied at temperatures down to –10°C
    RECOMMENDED USE
    -

    SPECIFICATION DATA AT 20°°C


    Gloss Flat
    Colour See colour card
    Specific gravity 1.30 ± 0.1 kg / liter
    Solids by volume 44 + 2 % (depending on colour)
    Recommended Dry film thickness : 75 – 100 microns depending on colour
    Wet film thickness : 170 microns for 75 microns ;227 microns for 100 microns
    2 2
    Coverage theoretical 5.9 m / litre – 75 microns ; 4.4 m / litre – 100 microns
    Drying time Temperature Touch dry Hard dry
    26°C 25 minutes 6 hours
    32°C 20 minutes 5 hours
    36°C 15 minutes 4 hours
    40°C 10 minutes 3 hours
    Full cure -
    Painting interval Min : 4 hours ; max : unlimited
    VOC Max. 501 g/litre
    Flash point (DIN 53213) 27ºC
    Pot life -
    Service temperature Continuous : 160°C
    Periodic : up to 200°C
    Shelf life 12 months (cool and dry place)
    SURFACE PREPARATION
    The surface to be over coated / previous coat, must be dry and clean, free of oil,
    grease and other contaminants
    CONDITION OF APPLICATION
    o o
    Temperature: minimum -10 C; maximum 50 C
    Relative humidity: maximum 85%
    o
    Substrate temperature should be at least 3 C above dew point.

    WE PROTECT YOUR INVESTMENT Page 1 of 2

    Jl. Lanbouw 1, Jagorawi-Cibinong Bogor, INDONESIA; 021-8756310-11, 8753043; F: 021-8753042; www.sigmautama.com ; cs@sigmautama.com
    Product
    Data Sheet

    SIMACRYLIC COATING
    2305 - 00
    A - two page issue January 2008

    SYSTEM SPECIFICATION
    Preceding coat required : chlorinated rubber or vinyl primer
    Finish coat required : SIMACRYLIC FINISH
    INSTRUCTION FOR USE
    Stir well before use, preferable by means of mechanical mixer to ensure good
    homogeneity.
    APPLICATION DETAILS
    Method of application Airless spray Air spray Brush (Max DFT/coat
    approx.60µm
    Thinner No. 43-00 43-00 43-00
    Volume of thinner 0 - 3% (depending on 6 -10% 0-3%
    request thickness)
    Nozzle orifice Approx. 0.48-0.58 mm 1.8-2.0 mm -
    (0.019-0.023 inch)
    Nozzle pressure 12-15 MPa(Approx.120- 0.3 - 0.4 MPa -
    150bar;1700-2100psi) (Approx.3-4bar;
    43-57psi)
    Cleaning solvent Sima Thinner 43-00

    SAFETY PRECAUTION
    - Avoid contact with the skin and eyes.
    - Wear suitable protective clothing such as overalls, goggles, dust mask and
    gloves.
    - Ensure that there is adequate ventilation in the area where the product is being
    applied. Do not breathe the vapour or spray.
    - This product is flammable. Keep away from sources of ignition. Do not smoke.
    HEALTH AND SAFETY: For detailed information on the health and safety hazards and precaution for use
    of this product, please see the MATERIAL SAFETY DATA SHEET.

    PACKING SIZE AND STORAGE


    Packing size (one pack product) : 5 and 20 litres
    Storage
    The product must be storage in accordance with national regulation.
    Preferred storage conditions are to keep the containers in the dry space
    provided with adequate ventilation. The containers should be sealed
    tightly

    The 6th Edition


    The information in this data sheet is to the best our knowledge connects at date printing. The company reserves the right to the modify data without notice. Any change in data will normally be
    followed by issued of new data sheet. The user should check the data of printing and if more than 12 months have elapsed, then the data should on only be used after checking with our
    nearest self-office to establish that they are still valid. Since condition of application and services may be beyond our control, no liability can accept on basis of this data.

    WE PROTECT YOUR INVESTMENT Page 2 of 2

    Jl. Lanbouw 1, Jagorawi-Cibinong Bogor, INDONESIA; 021-8756310-11, 8753043; F: 021-8753042; www.sigmautama.com ; cs@sigmautama.com

    You might also like