The Best For The Best: Worldwide Corporation Worldwide Customer
The Best For The Best: Worldwide Corporation Worldwide Customer
The Best For The Best: Worldwide Corporation Worldwide Customer
BUHMWOO PRODUCTS
The Best
BUHMWOO
Worldwide Corporation
PRODUCTS
for the Best
Worldwide Customer
2012
#137-889 70-3, Yangjae-dong, Seocho-gu, Seoul Tel. +82) 2-571-6321 Fax. +82) 2-571-4766 www.buhmwoo.com
Green Clean Love & Life
범우제품카다록-영문-표지 2012.5.3 4:58 PM 페이지2 MONO-CHAN 2540DPI 200LPI
Domestic Network
Head Office Sihwa Branch Changwon Vendor
#137-889 70-3, Yangjae-dong, Seocho-gu, Seoul #429-848 1248-2, Jeongwang-dong, Siheung-si, #641-846 6-10, Palyong-dong, Euichang-gu,
Tel. +82) 2-571-6321~8 Fax. +82) 2-571-6329 Gyeonggi-do Changwon-si, Gyeongsangnam-do
Tel. +82) 31-498-0531 Fax. +82) 31-498-0534 Tel. +82) 55-265-5761 Fax. +82) 55-265-5766
Buhmwoo Institute of Technology
#445-941 718-106, Seokpo-ri, Jangan-myeon, Busan Branch Daejeon Vendor
Hwaseong-si, Gyeonggi-do #626-210 9-27, Gyo-dong, Yangsan-si, #306-805 59-1, Dukam-dong, Daeduck-gu, Daejeon-si
Tel. +82) 31-358-8200 Fax. +82) 31-358-8212 Gyeongsangnam-do
Tel. +82) 42-931-3730 Fax. +82) 42-931-3738
Tel. +82) 51-462-9578 Fax. +82) 51-386-0664
Yangsan Factory Iksan Vendor
#626-210 9-27, Gyo-dong, Yangsan-si, Pohang Branch
#570-973 1042-13, Busong-dong, Iksan-si,
Gyeongsangnam-do #790-380 217-4, Mundeok-ri, Ocheon-eup,
Jeonlabuk-do
Tel. +82) 55-382-9578 Fax. +82) 55-382-9700 Nam-gu, Pohang-si, Gyeongsangbuk-do
Tel. +82) 63-833-6044 Fax. +82) 63-833-6045
Tel. +82) 54-292-3856 Fax. +82) 54-292-7913
Sihwa Factory
Ulsan Branch Daegu Vendor
#429-848 1248-2, Jeongwang-dong, Siheung-si,
#680-030 103 Samhwan Art nouveau BID, 1412, #704-832 1-154 Wolam-dong, Dalseo-gu, Daegu-si
Gyeonggi-do
Dal-dong, Nam-gu, Ulsan-si Tel. +82) 53-574-9984 Fax. +82) 53-585-2137
Tel. +82) 31-497-8171 Fax. +82) 31-497-8176
Tel. +82) 52-272-4334 Fax. +82) 52-275-4335
Kwangju Vendor
Kyeongin Branch
Kwangyang Branch #506-301 620-16, Dochun-dong, Kwangsan-gu,
#403-080 718-1, Namkwang Centlex, 440-4
#545-070 32-41, Ma-dong, Kwangyang-si, Kwangju-si
Chungchun-dong, Bupyeong-gu, Incheon-si
Jeonlanam-do Tel. +82) 62-953-0038 Fax. +82) 62-959-0040
Tel. +82) 32-363-4311 Fax. +82) 32-363-4314
Tel. +82) 61-792-4050 Fax. (+82) 61-792-4051
Pusan Vendor
Suwon Branch Asan Branch #618-290 227-3, Sinho-dong, Gangseo-gu, Pusan-si
#440-829 571-3, Chunchun-dong, Jangan-gu, #343-827 1645-7, Bokun-ri, Songak-eup, Tel. +82) 51-972-8766 Fax. +82) 51-972-8769
Suwon-si, Gyeonggi-do Dangjin-gun, Choongchungnam-do
Tel. +82) 31-271-1561 Fax. +82) 31-271-1565 Tel. +82) 41-357-5201 Fax. +82) 41-357-5202
2 67
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지1 MONO-CHAN 2540DPI 200LPI
BUHMWOO PRODUCTS
3
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지2 MONO-CHAN 2540DPI 200LPI
4
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지3 MONO-CHAN 2540DPI 200LPI
BUHMWOO PRODUCTS
History
1973s
1973.05 Established Buhmwoo and constructed a factory in
Bupyeong (Started to do anti-rusting oil business for the
first time in Korea)
1975.06 Formed an organization dedicated to research in Buhmwoo
1976 Developed skinpass rolling oil for the first time in Korea,
Supplied skinpass rolling oil to Yeonhap Steel
(Currently Union Steel) BIT Yangsan Factory
1978 Developed cold rolling oil for the first time in Korea,
Supplied cold rolling oil to Yeonhap Steel
(Currently Union Steel)
1982s
1982.03 Established Buhmwoo
1986.10 Constructed a factory in Yangsan
Buhmwoo Head Office Sihwa Factory
[Yusan Industrial Complex]
1990s
1990. 12 Constructed the headquarter building in Seoul
1991. 10 Approved Buhmwoo Institute of Technology Research (BIT) by the government
1995. 12 Constructed a factory in Sihwa [Sihwa Industrial Complex]
2001s
2001. 01 Established KXC Chinese Corporation [Kunshan in China]
2002. 08 Incorporated Buhmwoo Institute of Technology Institute
2002. 10 Awarded KS grand prize (Cutting & Grinding Oil)
[Ministry of Commerce, Industry and Energy]
2002. 11 Received the Presidential Prize at the 28th National Quality
Management Award
2004. 05 Constructed the building of Buhmwoo Institute of Technology
Research in Hwaseong
2004. 11 Received the Gold Medal of Industrial Service Merit at the
30th National Quality Management Competition
2005. 06 Established YBI Indian Corporation [Chennai in India]
2007. 08 Established VBC Vietnamese Corporation [Ho Chi Minh in Vietnam]
2008. 12 Operated an agent, Aknel, selling Buhmwoo’s products in
European markets
2011. 01 Established BWI Indonesian Corporation [Jakarta in Indonesian]
2011. 02 Selected as a POSCO certified partner for ten consecutive years
(2002 - 2011)
| Main Certificates |
ISO9001•ISO14001•TS16949
OHSAS18001•PCP Certification
5
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지4 MONO-CHAN 2540DPI 200LPI
R&D
Buhmwoo Institute of Technology Research (BIT),
industry first independent corporation research center!
Investment of 7% or more annual sales in R&D!
High ratio of researchers against all employees, 10%!
| Patents |
6
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지5 MONO-CHAN 2540DPI 200LPI
BUHMWOO PRODUCTS
7
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지6 MONO-CHAN 2540DPI 200LPI
Features
Use of multi-functional materials based on the top
synthesizing technology enables to solve the existing
problems such as unstable emulsion, bubbling, short
lifetime, rust, etc. They are economical and efficient because
of long-term use without being affected by the hardness of
material or water. Furthermore, they are eco-friendly and
not harmful to humans due to the decay-free feature in spite
of no preservatives used.
8
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지7 MONO-CHAN 2540DPI 200LPI
9
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지8 MONO-CHAN 2540DPI 200LPI
Tapping Torque
1000 1200 1500 1500 1700 2000 2200 2300 2300 2300 2300 4500
(10%)
Special
Cutting Broaching emulsion
EC-400N Emulsion only for AI
W
MIC-3500
Type
Normal emulsion
1
EC-50
Drilling/ Special
Biostable emulsion
Cutting Tapping/ emulsion
EN-110H
Honing MGX-2, E-205
Turning/Drilling/
Cutting
Tapping Torque Micro emulsion
Cylinder/Flat/ MIC-100CF
Grinding
Centerless
Milling/Drilling/
Cutting
Turning Semi-synthetic
Cylinder/Flat/ MIC-2000, S-50NJ
Grinding W
Centerless/Honing
Type
Milling/Drilling/ 2
Cutting Synthetic Synthetic
Tapping Torque
(Lubrication type) (Lubrication type)
Grinding CBN grinding SC-525H SYN 7700N
10
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지9 MONO-CHAN 2540DPI 200LPI
11
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지10 MONO-CHAN 2540DPI 200LPI
12
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지11 MONO-CHAN 2540DPI 200LPI
13
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지12 MONO-CHAN 2540DPI 200LPI
14
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지13 MONO-CHAN 2540DPI 200LPI
KS Type 3
PINECUT 403 0.81 2.7 116 1 1 - A B •Low viscosity, honing, lapping
No.1
KS Type 3
PINECUT 703 0.82 3.1 116 1 3 - A A •Suitable for ball burnishing
No.1
15
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지14 MONO-CHAN 2540DPI 200LPI
KS Type 3
PINECUT 646 0.90 46.2 256 1 3 - A D •Gear hobbing
No.4
•Broaching
KS Type 4 •Good extreme pressure
PINECUT 914A 0.87 14.5 186 3 4 - A C
No.8 resistance and lubrication
•Suitable for helical broaching
KS Type 4 •Broaching
PINECUT 915 0.89 14.5 162 3 4 - A C •Applicable for heavy cutting
No.8 process
16
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지15 MONO-CHAN 2540DPI 200LPI
Turning KS Type 2 - 4
Boring/Reaming/Drilling KS Type 4
KS Type 1 - 2 KS Type 3 - 4
Gun drill KS Type 4
Cutting
Tapping KS Type 4
Broaching KS Type 4
Lapping/Honing/
KS Type 3 - 4
Super finishing
17
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지16 MONO-CHAN 2540DPI 200LPI
18
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지17 MONO-CHAN 2540DPI 200LPI
KS Type 4 •Broaching
BX-3045 0.98 17.2 160 3 4 C A A
No.7 •Optimized for helical broaching
19
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지18 MONO-CHAN 2540DPI 200LPI
3. MQL Oils
Minimum Quantity Lubrication (MQL) process is to spray minimum oil during cutting process.
At the time, MQL oil is used.
20
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지19 MONO-CHAN 2540DPI 200LPI
4. EDM Oils
Electrical Discharge Machining (EDM), also called spark machining, is a process to use the spark generated
when the positive and negative poles are crashed with each other. At the time, EDM oil is used.
N/A EDM-100 0.80 2.4 114 - - - - - •EDM oil for general use
21
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지20 MONO-CHAN 2540DPI 200LPI
Cleaning Oils
Cleaning Oils
After cutting, forming, rolling, etc. end, the following
processes are painting, coating and assembling. Cleaning
oils are used to remove used pollutants (process oils)
remaining in processed materials. They are classified into
solvent type and water-soluble alkali type according to the
amount and status of pollutants.
Features
Buhmwoo’s cleaning oils have excellent cleaning power
because of the use of special alcohol surfactant and
complex degreaser, minimize the amount of bubbles in
using a high-pressure washer, and prevent the
reattachment of oil, fine dust and ground powder, leading to
keep the cleanness of processed materials.
22
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지21 MONO-CHAN 2540DPI 200LPI
High temperature
High pressure
Room temperature-
High temperature
Spray W-90D W-90DM W-90DV
High temperature
General
Room temperature-
High temperature
Immersion
WS-1000
Ultrasonic wave
Transparent, Ferrous metal Room temp., •Good separation of other oil, anti-rust, and
W-80H 1.04 9.6 1~3%
colorless Al Temp. increase defoaming
Transparent, Ferrous metal Room temp., •Applicable for ferrous metal and AI
W-90D 1.04 10.3 1~3% materials
Light yellow Al Temp. increase •Good defoaming and anti-rust
23
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지22 MONO-CHAN 2540DPI 200LPI
Appearance
Product Specific gravity pH Cleaning Concentration
(Undiluted Target Material Features & Application
Name (15/4℃) (10%) Temperature (Brix %)
Solution)
Transparent, Ferrous metal Room temp., •Good separation of other oil and
W-90DS 1.04 9.8 1~3% anti-septicity
Light yellow Al Temp. increase •Good anti-rust and defoaming
24
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지23 MONO-CHAN 2540DPI 200LPI
Transparent,
BW-0431 1.02 7.7 TIRE Room temp. 7~15% •Lubricant for tires and hoses
Light yellow
Transparent, 8.0 (Undiluted Undiluted
LUBE-2 1.13 TIRE Room temp. •Lubricant for hoses
colorless solution) solution
Ferrous Metal +
Cleaning/Dryness Flash Point(℃) IBP(℃)_min EP(℃)_max Non-Ferrous Metal
25
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지24 MONO-CHAN 2540DPI 200LPI
Transparent,
WD-710B 0.72 10 or lower General cleaning •Good dryness and cleaning
colorless
26
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지25 MONO-CHAN 2540DPI 200LPI
Anti-Rusting Oils
Anti-Rusting Oils
Anti-rusting oils are used for anti-rusting to prevent metals
from being contacted with moisture or acid. When applying
this oil, it forms a powerful adsorbing film on the metal
surface, which blocks water, air and current flow.
Features
With good anti-rust, degreasing, water displacement, and
anti-oil stain, Buhmwoo supplies diverse and environmental-
friendly products suitable for various work conditions of
customers.
27
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지26 MONO-CHAN 2540DPI 200LPI
P-WP
W-BT
NO VOC •Water is used as a solvent NO VOC
PSW-30
W-30KN
P-308HD
P-309Y •With low smell ingredient, required features are met,
Low Smell
P-309YG and human effects are minimized
AP.3D
PO BW-70PS(1), BW-70PSB
Anti-oil stain, anti-rust, lubricant, degreasing,
Steel Cold rolled steel sheet BW-70PS(1), BW-70PSB
acid-resistance, sealer adhesive, etc.
Zn Plated steel BW-90EG, BW-90BG, P-910
Thin film type Anti-rust, water displacement, anti-oil stain,thin coating P-320(B) P-320(DW) -
Pipe General type Anti-rust, water displacement, anti-oil stain - P-320, P-370 -
General machine High volatility, Anti-rust, washing, water displacement P-SV, P-SV(A), P-SV(C) - -
Machine
Machine facility Long-term storage, anti-rust - - P-203D, P-126 series
Aluminum Anti-rust, water displacement, anti-discoloration, anti-oil stain P-325S P-DBH(N) P-250, P-260
Non-Ferrous
Metal
Copper parts Anti-rust, water displacement, anti-discoloration, anti-oil stain P-DVAS(C) P-260
28
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지27 MONO-CHAN 2540DPI 200LPI
29
범우제품카다록-영문-내지 2012.5.3 4:54 PM 페이지28 MONO-CHAN 2540DPI 200LPI
Film
Product Viscosity Flash Point Anti-Rust Indoor Anti-Rust
Category Symbol Thickness Features
Name (40℃ cST) (℃) (Salt Spray) (months)
(㎛)
200
•Indoor anti-rust, large facilities
RUSTOP P-601 NP-6 - or - 240 12
and machines
higher
Solvent
Dilution RUSTOP M-250 NP-19 - - - •Quick dry, transparent dry film
Type
Vaporable
•Vaporable anti-rusting oil.
Anti- RUSTOP VP-101 NP-20 - 75 2~3 - 2~3
Sealing is required.
Rusting Oil
24hrs
70
No rust •Water-soluble anti-rusting oil,
RUSTOP P-WP (Undiluted 112 - 1↓
(Chipping emulsion type
solution)
test)
Emulsion
24hrs
21
No rust •Water-soluble anti-rusting oil,
RUSTOP W-BT (Undiluted 140 - 1↓
Water- (Chipping emulsion type
solution)
Soluble test)
Anti-
Rusting 24hrs
Oil No rust •Water-soluble anti-rusting oil,
RUSTOP PSW-30 - - - 1↓
(Chipping emulsion type
test)
Chemical
24hrs
No rust •Water-soluble anti-rusting oil,
RUSTOP W-30KN - - - 1↓
(Chipping emulsion type
test)
30
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지29 MONO-CHAN 2540DPI 200LPI
Features
Having been developed through the technical-tie with EFTEC
(the U.S. and Europe) in the anti-rust technology, Buhmwoo
supplies automotive rust preventives with top quality and
up-to-date technologies. With thorough production quality
management meeting ISO system, we make high quality oil
products required by global auto makers.
31
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지30 MONO-CHAN 2540DPI 200LPI
2710B
•Solvent is water NO VOC
Under Coating 3030K Water-soluble
•Very low smell
2231MPD
•Protection
SHIPPING WAX •Removal KATS 5080 •GMK
•Working property
•Dust removal
Soluble UBC 2231MPD •Daewoo bus
•Abrasion-resistance
•Anti-rust
•Sound-proof
SEALER PB S04 SD1 •GMK
•Adhesiveness
•Abrasion-resistance
32
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지31 MONO-CHAN 2540DPI 200LPI
Black,
UNDERBODY WAX 3641U 42 65 sec (20℃) 50 1000↑ EDS M-8308
translucent
Brown,
WH516C1 42 160cPs (23℃) 80 500 03-70550/--B
transparent
Brown,
WH522A2 130 180cPs (23℃) 70 500 GMW 15416
transparent
Transparent
KATS 5080 Water-soluble 200cPs (20℃) EDS M-8304
resin
ANTICHIP PB S04 SD1 204 60000cPs (25℃) Gray PVC 300 300 GMW-15978
White,
HEMING B104E 210 130000cPs (25℃) 3000 300 L002 0597
translucent
White,
SEALER ROOF DITCH PB1222 210 80000cPs (25℃) 3000 300 L002 0369
translucent
Black,
UBS PB221G3 210 65000cPs (25℃) 3000 300 L001 0170
translucent
Black,
UBC PB221G1 210 65000cPs (25℃) 1000 300 L001 0170
translucent
Black wax,
CONTAINER U/B WAX 4941K 42 5000cPs (20℃) 150 1200↑ TS-96-11
Asphalt
White,
GRIT REMOVER M-800R Water-soluble 12000cPs (20℃) - - -
translucent
Transparent
HOOP COATING W-222 Water-soluble 11 sec (20℃) - - -
wax
33
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지32 MONO-CHAN 2540DPI 200LPI
Features
Buhmwoo supplies custom-made products for each
customer after reviewing the working conditions and the
required property, analyzing the metal structure and
process, and selecting and developing proper oils. Our
products are designed and manufactured to have long-term
stability in the cooling function and luminance and in the
resistance to heat and oxidation by combining advanced
base oils and functional additives.
34
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지33 MONO-CHAN 2540DPI 200LPI
Type
Stability
Oil Temp. (80℃) Oil Temp. (120℃) Oil Temp. (160℃)
Type
Residual
Property Cooling by 400℃ Property Cooling by 400℃ Property Cooling by 400℃ Viscosity
Carbon
Temp. (℃) (sec.) Temp. (℃) (sec.) Temp. (℃) (sec.) Ratio
Increase (%)
※ In Korean Industrial Standards, heat treatment oils are classified by their use and its corresponding performance. In other overseas standards, similar
conditions are used to classify them.
35
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지34 MONO-CHAN 2540DPI 200LPI
Semi Hot
Type Cold Oil (KS Type 1) Hot Oil (KS Type 2 No.2)
(KS Type 2 No.1)
Waster-
Viscosity @40℃mm2/S @100℃mm2/S Soluble
Use 10 > 10~15 15~25 25~35 5~15 15~20 20~25 25~30 30~40
Sealed oil basin
High oil temp.
Open oil basin
Brightness process
Vacuum quenching
furnace
Gas nitrocaburizing ☆ ☆ ☆ ☆
Tempering
High frequency
induction quenching
※ In case of water-insoluble heat treatment oil, its cooling property depends on its viscosity at proper oil temperature.
※ When selecting proper heat treatment oil, its shape, steel type, facility, and use temperature as well as viscosity should be considered.
Kinematic Char.
Flash Point Oil Temp.
KS Product Viscosity Temp. Features and Application
(COC,°C) (°C)
(40°C,mm2/s) (°C)
HIGH SPEED •Suitable for quenching of bolts and mid and large
heat - forging products or carburizing quenching of
Type 1 No.2 QUENCH 18.5 200↑ 615 50~90
carbon and alloy steels. Long-term stability of
BW-1280(B,C,H) brightness and cooling property
36
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지35 MONO-CHAN 2540DPI 200LPI
Kinematic Char.
Flash Point Oil Temp.
KS Product Viscosity Temp. Features and Application
(COC,°C) (°C)
(40°C,mm2/s) (°C)
Agitation, cooling property (Type 1 No.2 Heat Treatment Oil), Viscosity and cooling property of heat treatment oil
and cooling step
37
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지36 MONO-CHAN 2540DPI 200LPI
Rolling Oils
Rolling Oils
Rolling is a process to reduce the thickness of a material by
passing between rolls. In this process, rolling oil enables to
work smoothly by controlling heat generation and wear
caused by friction and lubricating the metal and the rolls to
prevent plastic deformation on the strip.
Features
Buhmwoo’s rolling oils implement both eco-friendly work
environment and improved steel quality by minimizing the
pollutants on the surface of the steel and facilities using
properties of super clean. In addition, with the design for the
products optimized for customer’s facility and to meet
customer’s requirements, Buhmwoo supplies the products
customized for its customers for productivity enhancement
and cost reduction.
38
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지37 MONO-CHAN 2540DPI 200LPI
BW HOTROL 60HD 150 14 100 200 or higher Finishing mill, HSS, HI-Cr
BW HOTROL 90AD 240 - 110 200 or higher Roughing mill, Finishing mill, HSS
39
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지38 MONO-CHAN 2540DPI 200LPI
3-1. Type and Role of Additives for Rolling Process 3-2. Application of Additives for Rolling Process
•Pickling inhibitor: Prevent over-pickling, and secure PO •Pickling inhibitor: Continuously use at proper rate
surface quality considering the effective concentration of recycled or
•Pickling inhibitor: Increase the speed of removing scale new hydrochloric acid and the input
and improve pickling •Pickling accelerator: Properly add to the effective
•Carbon deposit inhibitor: Prevent carbon deposit by adding concentration of hydrochloric acid
organic sulfur •Carbon deposit inhibitor: After degreasing, mix it with
rinse liquid or dilute it to apply
MBT-NA - 10.1 -
40
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지39 MONO-CHAN 2540DPI 200LPI
Stainless
Reverse Mill
Recirculation
Sendzimir Mill
High alloy steel sheet
Black Plate
Fats and vegetable oil,
Direct PL-TCM
mixed-based, ester-based
Special steel
Mild Steel
Stainless Steel
Mineral oil-based, mixed-based,
Reverse Mill
ester-based
Electrical Steel
Black Plate
Fats and vegetable oil,
PL-TCM Steel sheet for automobiles
mixed-based, ester-based
Electrical Steel
41
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지40 MONO-CHAN 2540DPI 200LPI
42
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지41 MONO-CHAN 2540DPI 200LPI
Skin pass rolling oils are used for temper rolling, which finishes the surface of annealed steel sheet or hot-dip galvanized
steel sheet through roll of required roughness. These oils have good washing and anti-rust for the lubrication and the
coefficient of friction proper to each process. According to its characteristics, the skin pass rolling oils are classified into CR
(cold rolled strip) skin pass oils and CG (galvanized strip) skin pass oils.
43
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지42 MONO-CHAN 2540DPI 200LPI
Coil Coatings
44
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지43 MONO-CHAN 2540DPI 200LPI
Curing
Coating Hardening Thickness
Category Material Features Temp. Applications
Type Type (mg/m2)
(PMT, ℃)
Curing
Coating Hardening Thickness
Category Material Features Temp. Applications
Type Type (mg/m2)
(PMT, ℃)
45
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지44 MONO-CHAN 2540DPI 200LPI
Upper Coatin㎛)
Upper Coatin
10㎛)
Lower Coatings (5㎛
5㎛) Lower Coatings (5㎛
5㎛) Upper Coati
5㎛)
Galvanizing Galvanizing Galvanizing
Steel Steel Steel
Galvanizing Galvanizing Galvanizing
Internal
Coatings (5㎛) Internal
Coatings (1㎛) Internal
Coatings (1㎛)
Existing
PCM
(solvent-
borne) solvent-
borne
Type
with
Thin
Film Water-
borne
Type
with
Thin
Film
Curing
Coating Coating Thickness
Category Material Features Temp. Applications
Type Type (mg/m2)
(PMT, ℃)
Upper coating:
•Melanization, thin film 9~11
solvent-borne formation, corrosion resistance, 210~230 Lower coating:
chemical resistance, forming 1~1.2
Internal: 1~1.2 For coating for
ROLL Hot air /
EGI/CGI external materials
COATING Induction heating
•VOC Free, thin film formation Upper coating: of home appliances
(1-COAT), melanization,
Water-borne 180~190 5~6
corrosion resistance, chemical
resistance, forming Internal: 1~1.2
46
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지45 MONO-CHAN 2540DPI 200LPI
Forming Oils
Forming Oils
When external force is applied to an object, its shape is deformed while
tension occurs. If the force is small, the shape of the object will return to its
original. However, if the force exceeds certain level, the shape is not recovered
and plastic deformation is created. This property is called plasticity. The
process of a material using this property is called plastic deformation.
Features
Buhmwoo produces and supplies forming oils through optimized design
(chlorine free) for automobile parts, large machinery parts, and aircraft parts,
which are hard to process, considering and the working property of each
product type and the environment safety of customers.
47
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지46 MONO-CHAN 2540DPI 200LPI
1. Forging Process
Forging process is used to mold desired shape and improve mechanical property of a metal material by putting the material
into between tools or metal molds and attaching them to compress the material. Depending on the work temperature,
forging process is classified into cold forging, warm forging, and hot forging.
Material
Process Name
Aluminum Copper & Copper Alloy Alloy Steel Carbon Steel Stainless
FH-300B
FH-300B
Light-Duty FH-1800JC FH-1800JC
FH-1800JC
Type FH-1800J FH-1800J
FH-1800J
FINEFORM-30
FH-400B FH-400B
FH-1900 FH-1900
FH-400B
FH-1800JK FH-1800JK
Medium-Duty FH-1900 GREEN FORMER
FH-1900 FH-1800H FH-1800H
Type FH-1800JK 2900
FINEFORM-60P FINEFORM-60P
FH-1800H
GREEN FORMER GREEN FORMER
2900 2900
FINEFORM-90K
FINEFORM-80S FINEFORM-80S
FINEFORM-80S
FINEFORM-90K FH-3700K FH-3700K
Heavy-Duty FH-3700K
FH-3700K FINEFORM-90K FH-4700K FH-4700K
Type FH-4700K
FH-4700K GREEN FORMER GREEN FORMER
GREEN FORMER
3000 3000
3000
48
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지47 MONO-CHAN 2540DPI 200LPI
FH-1800H 58.4 222 10-15 •For 8~12mm bolt process and swaging
GREEN FORMER 2900 40.5 186 10-15 •For high speed facilities like high tension bolts
FINEFORM-30 32 200 5 •For high speed facilities like direct connection screws
FINEFORM-26 25.1 212 5-10 •For rolling process of chlorine-free, high carbon steel shafts
49
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지48 MONO-CHAN 2540DPI 200LPI
2. Press Process
Press process is called stamping. It indicates all processes such as shearing, bending, deeping drawing, which is used to
create a container by putting into a die hole with punch, stretch expand, which is molded on a curved surface by applying
surface pressure on a board, forging, and extrusion. In this press, its friction conditions such as surface pressure, friction
surface temperature, and surface area increase rate between tool and material surface are not more severe than those of
warm forging, drawing, and extrusion, but this process has larger surface area against product volume than those
processes. Thus, if lubrication condition is not proper, this process may cause the damage of a material or metal mold.
Material
Thickness (mm)
Aluminum Copper & Copper Alloy Cold Rolled Steel Sheet Carbon Steel Stainless
FD-250
0.1 ~ 0.5 FD-3000SD FE-150S
FD-300
FD-3000MW FD-3000
1.0 ~ 3.0 FD-800 FD-800 FD-3000S
FD-2000SA FD-2000SB
FD-3000G
3.0 ~6.0 FE-1000F FE-1000F
FD-1500
FD-300W 9.9 155 5 •For press of thin film of aluminum (home appliances)
FE-150S 22 160 5~10 •Low viscosity. For complex process of fine blanking.
50
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지49 MONO-CHAN 2540DPI 200LPI
Kinematic
Flash Point Load Capacity
Product Name Viscosity Features
(COC, ℃) (kgf/cm2)
(40℃, mm2/s)
3. Drawing Process
Drawing process is used to reduce and adjust the diameter and the thickness of the tube wall of a metal wire or
a metal tube by inserting them into a die whose edge is narrow and by pulling the edge to extracting the wire or
the tube through the die hole.
Material
Thickness (mm)
Aluminum Copper & Copper Alloy Hot Rolled Coil Stainless
51
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지50 MONO-CHAN 2540DPI 200LPI
BWD-1800 15.2 158 1-5 •Only for fine line of Al. Good lubrication and chip precipitation
- Proper viscosity can be selected depending on the process
BWD-1900 30 210 1-5 level.
BWD-1100 112 215 1-5 •Drawing like Cu and Al wire, bar, and hexagon bar
- No discoloration of a material after heat treatment
- Good oxidative stability and lubrication for improved
BWD-3000 395 240 5 surface roughness
Solid Viscosity
Product Name pH (X2) Features
(Brix, %) (mPa.s, 25℃)
※ This product should be diluted with water and used for drawing of pipes for automobiles or for rescue.
52
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지51 MONO-CHAN 2540DPI 200LPI
Quick dry stamping process is a punching process that makes holes of a fixed size for non-ferrous metals
such as silicon steel plat, electroplated steel sheet, Al, and cooper plate. The conditions that should be met for
each use are described as follows:
•For silicon steel plat : Requires good punching, dryness, annealing, and anti-rust, low smell and skin irritation, and high
flash point.
•For galvanized steel sheet : Requires no white rust and good degreasing.
•For cooper (alloy) : Requires no corrosion and discoloration, and good annealing.
•For aluminum (alloy) : Requires no white rust and good machinability.
•For SUS steel sheet : Requires good extreme pressure resistance, cooling, and degreasing.
Material
Thickness (mm)
Aluminum Copper & Copper Alloy Cold Rolled Steel Sheet Stainless
FL-50SA 1.25 49 1
FL-1M 1.47 57 1
FL-20A 1.15 56 1
53
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지52 MONO-CHAN 2540DPI 200LPI
FL-50V 1.44 57 1
•No residue with no oil stain
FL-50Y 1.46 56 1
FL-590 2.79 57 1
•Punching oil for copper and copper alloy
•Good lubrication and no discoloration
FL-70 2.84 56 1
FL-13 13.0 200 1 •For high speed punching of Cu connectors and terminals
AL-46 47 170 1
•For press of aluminum parts
AL-800 700 200 1 - Proper viscosity can be selected according to the thickness
of a processed product
AL-2400 2,100 220 1
Wire drawing process is to make lines with the desired shape through the hole of a die such as steel wires.
The process of putting a material into a die, which is adjusted to the section of a desired line, and extracting a line is
performed repeatedly to make fine lines.
54
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지53 MONO-CHAN 2540DPI 200LPI
Recommended
pH
Product Name Concentration Features
(10%)
(Brix, %)
WD-515A 9.7 6 ~ 10 •For wire drawing for median and thick lines of copper (alloy)
- Suitable for single and concentration tanks
- Good washing (separation of copper powder) for
WD-515AZ 9.7 6 ~ 10 equipment cleanliness
55
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지54 MONO-CHAN 2540DPI 200LPI
Molten metal (e.g. zinc, silicon, copper, aluminum, magnesium, etc) is injected to the steel mold, which is completely
identical with the desired casting shape, to get the casting same to the mold. This aluminum diecasting release agent is
applied to the mold surface to give anti-stiction property to the molten metal and mold.
•Mineral free
•Good application at low - high temperature
990 19 0.2 ~ 0.5
•Generally applicable for large sized machine such as
six-speed cases
•Mineral free
•For equipment with high pressure, high temperature,
5000K 23.5 0.4 ~ 0.6
and heavy load such as cylinder block
•Suitable for mist spray facilities
•Mineral free
990DW 20 0.2 ~ 0.3 •800-1200t casting facilities such as oil pumps
•Applicable for circulation system
•Mineral free
2000M 29 0.3 ~ 0.6 •Available to work with low concentration as release
agent only for magnesium
56
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지55 MONO-CHAN 2540DPI 200LPI
Plunder oil is used to prevent spark and reduce friction resistance between plunger tip and sleeve.
Recommended
pH
Product Name Concentration Features
(10%)
(Brix, %)
57
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지56 MONO-CHAN 2540DPI 200LPI
Industrial Lubricants
Industrial Lubricants
Industrial lubricants are used to help better operation of
industrial equipment. There are several industrial lubricant
types such as hydraulic oils to be a medium of power
transmission of industrial equipment, spindle oils to cool
and lubricate rotor-bearings, and extreme pressure gear
oils to lubricate reduction gears.
58
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지57 MONO-CHAN 2540DPI 200LPI
1. Hydraulic Oils
Mineral oil based hydraulic fluids HH : Refined mineral oil with no additives
(turbine oil, pure mineral oil)
ISO-L-
HL : Normal hydraulic oil (rust & oxidation inhibitor)
HM : Anti-wear hydraulic oil (anti-wear inhibitor)
HR : High viscosity index hydraulic oil
(viscosity index improver)
HV : High viscosity index anti-wear hydraulic oil (M +R)
DR: Phosphoric Ester
Synthetic based DS: Chlorinated Hydrocarbon
DU: Fatty Acid Ester (Polyolester)
59
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지58 MONO-CHAN 2540DPI 200LPI
Mineral oil based hydraulic fluid is manufactured by mixing highly pure refined mineral oil with various additives.
Its performance depends on the type and the refining process of crude, and the type and the amount of an additive.
2) List of Wear Resistant Mineral Oil Based Hydraulic Fluid Products (ISO-L-HM)
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Viscosity Index Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
60
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지59 MONO-CHAN 2540DPI 200LPI
3) List of Wear Resistant Hydraulic Oil with High Viscosity Index (ISO-L-HV)
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Viscosity Index Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
BW HYLUBE
BV-46 46 150↑ 210↑ -40 1A
BV-Series
1) List of Fatty Acid Ester Based Flame Resistant Hydraulic Oil Products (ISO-L-HFDU)
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Viscosity Index Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
※ Proper materials : Fluoroelastomer (VitonⓇ), PTFE (TeflonⓇ), NBR (Buna N), AU (Polyurethane)
※ Improper material : Phenol resin
61
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지60 MONO-CHAN 2540DPI 200LPI
※ Proper materials : Fluoroelastomer (VitonⓇ), PTFE (TeflonⓇ), NBR (Buna N), AU (Polyurethane)
※ Improper materials : Zn, Al, Mg, Cd, AU (Urethane), nylon fiber, leather, cork, paper, no coating on inside of tank
4. Slideway Lubricants
BW WAYLUBE BSH and BS series are a medium of lubrication on sliding area of a machine with good performance.
The series prevent stick-slip symptom on friction surface, protect the friction area of a machine tool, and secure the
best machining accuracy.
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Adhesiveness Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
5. Gear Oils
BW GEARLUBE BHG series are industrial gear oil with extreme pressure resistance, corresponding to KS industrial type 2.
They are used ranging from various airtight reduction gears to large gears (splash oil lubrication type) and to heavy load
hydrostatic pressure bearings (circulating lubrication). Carefully selected additives such as sulfur-based extreme pressure
additive are mixed with high pure lube base oil to effectively protect facilities in equipment where heavy load is applied.
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
62
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지61 MONO-CHAN 2540DPI 200LPI
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
BW MULTILUBE BM series are multi-functional lubricants used in diverse industrial fields in various ways, ranging from
normal hydraulic oils for light load to reduction gear oils for light load, spindle oils, and sliding surface lubricants.
2) Introduction of Additive Machine Oil Products (Light Load Sliding Surface and Reduction Gear)
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Viscosity Index Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
63
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지62 MONO-CHAN 2540DPI 200LPI
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Viscosity Index Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
7. Spindle Oils
BW SPIN series are spindle oil with good anti- abrasion, anti-rust, and demulsibility by mixing special additive with
ultra pure lube base oil. They smoothly lubricate and cool bearings being rotated at high speed.
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
BW THERM series are mineral oil based heal transfer fluid. They can be applied to airtight indirect heating-circulation type
at up to 320℃.
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
64
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지63 MONO-CHAN 2540DPI 200LPI
9. Compressor Oils
BW COMP series are mineral oil based compressor oil. They can be used for oil injection type rotary compressors and
small reciprocating compressors.
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
BW VPL series are mineral oil based vacuum pump oil that ultra pure lube base oil is applied.
Copper Flat
Kinematic Viscosity Flash Point Pour Point
Category Product Name Corrosion
(40℃, mm2/s) (COC, ℃) (℃)
(100℃ x 3hrs)
BW MCL series are a dry film chain lubricant to lubricate the conveyors/rollers exposed to high temperature. With the
application of molybdenum based solid lubricant, which is characterized as good lubrication, the series are suitable for
coating process, which is exposed to high temperature, or feeders, which are heated at high temperature.
BW DOORCLOSER series are a doorcloser oil and used for door closers. The products have good oxidative stability and low
viscosity change during temperature change. They can be applicable for door closers at extreme climate change.
65
범우제품카다록-영문-내지 2012.5.3 4:55 PM 페이지64 MONO-CHAN 2540DPI 200LPI
Global BUHMWOO
The Best Worldwide Corporation for the
Best Worldwide Customer!
Buhmwoo Institute of Technology Research Young Buhmwoo India Co., Pvt. Ltd.
Hwaseong, Korea Tel. +82) 31-358-8200 Chennai, India Tel. +96) 44-2716-8042
66
범우제품카다록-영문-표지 2012.5.3 4:58 PM 페이지2 MONO-CHAN 2540DPI 200LPI
Domestic Network
Head Office Sihwa Branch Changwon Vendor
#137-889 70-3, Yangjae-dong, Seocho-gu, Seoul #429-848 1248-2, Jeongwang-dong, Siheung-si, #641-846 6-10, Palyong-dong, Euichang-gu,
Tel. +82) 2-571-6321~8 Fax. +82) 2-571-6329 Gyeonggi-do Changwon-si, Gyeongsangnam-do
Tel. +82) 31-498-0531 Fax. +82) 31-498-0534 Tel. +82) 55-265-5761 Fax. +82) 55-265-5766
Buhmwoo Institute of Technology
#445-941 718-106, Seokpo-ri, Jangan-myeon, Busan Branch Daejeon Vendor
Hwaseong-si, Gyeonggi-do #626-210 9-27, Gyo-dong, Yangsan-si, #306-805 59-1, Dukam-dong, Daeduck-gu, Daejeon-si
Tel. +82) 31-358-8200 Fax. +82) 31-358-8212 Gyeongsangnam-do
Tel. +82) 42-931-3730 Fax. +82) 42-931-3738
Tel. +82) 51-462-9578 Fax. +82) 51-386-0664
Yangsan Factory Iksan Vendor
#626-210 9-27, Gyo-dong, Yangsan-si, Pohang Branch
#570-973 1042-13, Busong-dong, Iksan-si,
Gyeongsangnam-do #790-380 217-4, Mundeok-ri, Ocheon-eup,
Jeonlabuk-do
Tel. +82) 55-382-9578 Fax. +82) 55-382-9700 Nam-gu, Pohang-si, Gyeongsangbuk-do
Tel. +82) 63-833-6044 Fax. +82) 63-833-6045
Tel. +82) 54-292-3856 Fax. +82) 54-292-7913
Sihwa Factory
Ulsan Branch Daegu Vendor
#429-848 1248-2, Jeongwang-dong, Siheung-si,
#680-030 103 Samhwan Art nouveau BID, 1412, #704-832 1-154 Wolam-dong, Dalseo-gu, Daegu-si
Gyeonggi-do
Dal-dong, Nam-gu, Ulsan-si Tel. +82) 53-574-9984 Fax. +82) 53-585-2137
Tel. +82) 31-497-8171 Fax. +82) 31-497-8176
Tel. +82) 52-272-4334 Fax. +82) 52-275-4335
Kwangju Vendor
Kyeongin Branch
Kwangyang Branch #506-301 620-16, Dochun-dong, Kwangsan-gu,
#403-080 718-1, Namkwang Centlex, 440-4
#545-070 32-41, Ma-dong, Kwangyang-si, Kwangju-si
Chungchun-dong, Bupyeong-gu, Incheon-si
Jeonlanam-do Tel. +82) 62-953-0038 Fax. +82) 62-959-0040
Tel. +82) 32-363-4311 Fax. +82) 32-363-4314
Tel. +82) 61-792-4050 Fax. (+82) 61-792-4051
Pusan Vendor
Suwon Branch Asan Branch #618-290 227-3, Sinho-dong, Gangseo-gu, Pusan-si
#440-829 571-3, Chunchun-dong, Jangan-gu, #343-827 1645-7, Bokun-ri, Songak-eup, Tel. +82) 51-972-8766 Fax. +82) 51-972-8769
Suwon-si, Gyeonggi-do Dangjin-gun, Choongchungnam-do
Tel. +82) 31-271-1561 Fax. +82) 31-271-1565 Tel. +82) 41-357-5201 Fax. +82) 41-357-5202
2 67
범우제품카다록-영문-표지 2012.5.3 4:57 PM 페이지1 MONO-CHAN 2540DPI 200LPI
BUHMWOO PRODUCTS
The Best
BUHMWOO
Worldwide Corporation
PRODUCTS
for the Best
Worldwide Customer
2012
#137-889 70-3, Yangjae-dong, Seocho-gu, Seoul Tel. +82) 2-571-6321 Fax. +82) 2-571-4766 www.buhmwoo.com
Green Clean Love & Life