NIT Schedule for A/R, S/R, MOW & Other Deposite work On Residential and

Non-Residential Building Under Sub Division No. 2 Balaghat

Building S.O.R. w. e. f. dated 01/12/2020 PAC Rs. 5.00 Lacs
S. No. Item of work Rate Unit Amount
1 15.2 Demolishing cement concrete Demolishing cement concrete 578.00 cum
manually/by mechanical means including disposal of material within 50
metres lead as per direction of Engineer-in- Charge. 15.2.1 1:3:6 or richer
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
2 15.3 Demolishing R.C.C. Demolishing R.C.C. work manually/ by mechanical 844.00 cum
means including stacking of steel bars and disposal of unserviceable material
within 50 metres lead as per direction of Engineer-in- Charge.
3 15.6 Demolishing brick work Demolishing brick work manually/ by mechanical 487.00 cum
means including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead as per direction of
Engineer-in- Charge. 15.6.3 In cement mortar
4 15.15 Taking out doors, windows shutters Taking out doors, windows and 33.00 each
clerestory window shutters (steel or wood) including stacking within 50
metres lead: 15.15.1 3 sq. metres and below.
5 15.14 Dismantling doors, windows, shutter including chowkhats, 85.00 each
Dismantling doors, windows and clerestory windows (steel or wood) shutter
including chowkhats, architrave, holdfasts etc. complete and stacking within
50 metres lead : 15.14.1 3 sq. metres and below.
15.14.2 Area>3.0 sq.m. Of area beyond 3 sq. metres. 117.00 each
6 15.11 Dismantling tile/ kota /marble/ Granite work Dismantling tile/ Kota 17.00 Sqm
stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar
including stacking material within 50 metres lead. 15.11.1 Upto 25mm thick
For thickness of tiles 10 mm to 25 mm.
15.11.2 Above 25mm thick For thickness of tiles above 25 26.00 Sqm
mm and upto 40 mm.
7 15.27 Dismantling roofing sheet Dismantling roofing including ridges, hips 39.00 Sqm
valleys and gutters etc., and stacking the material within 50 metres lead of:
15.27.1 G.S. G.S. Sheet
15.27.2 Asbestos/ Non asbestors sheet 18.00 Sqm
8 15.29 Dismantling tiled roofing Dismantling tiled roofing with battens boarding 82.00 Sqm
etc. complete including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead.
9 15.31 Dismantling fencing posts or struts Dismantling and stacking 73.00 each
within 50 metres lead, fencing posts or struts including all earth work and
dismantling of concrete etc. in base of : 15.31.1 Iron or pipe T’ or ‘L’ iron or
pipe
10 15.31.2 R.C.C. R.C.C. 87.00 each
11 15.33 Dismantling barbed wire or flexible wire rope in fencing Dismantling 9.00 Kg
barbed wire or flexible wire rope in fencing including making rolls and
stacking within 50 metres lead.
12 15.37 Dismantling precast concrete or stone slabs Dismantling precast 69.00 Sqm
concrete or stone slabs in walls, partition walls etc. including stacking
within 50 metres lead: 15.37.1 Thickness Upto 40 mm Thickness upto 40 mm

15.37.2 Thickness above 40 mm upto 75 mm 104.00 Sqm

13 15.38 Dismantling cement asbestos or other hard board ceiling or partition 13.00 Sqm
Dismantling cement asbestos or other hard board ceiling or
partition walls including stacking of serviceable materials and disposal of
unserviceable materials within 50 metres lead.
14 15.48 Dismantling old plaster or skirting raking out joints and cleaning the 13.00 Sqm
surface for plaster including disposal of rubbish to the dumping ground within
50 metres lead.
S. No. Item of work Rate Unit Amount
15 2.6 Excavation soil Earth work in excavation by mechanical means (Hydraulic 129.00 cum
excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in
width as well as 10 sqm on plan) including dressing of sides and ramming of
bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m,
disposed earth to be levelled and neatly dressed. (No extra lift is payable if
work is done by mechanical means) All kinds of soil
16 4.1 C.C. upto plinth level Providing and laying in position cement concrete of 3808.00 cum
specified grade excluding the cost of centering and shuttering - All work upto
plinth level : 4.1.2 With 40 mm metal With 40mm nominal size graded stone
aggregate. M-10
4.1.1 With 20mm metal With 20mm nominal size graded stone aggregate. 4471.00 cum
4.1.1.3 M-15 M-15 – Grade concrete
17 Providing and laying in position cement concrete of specified grade excluding 4933.00 cum
the cost of centering and shuttering - All work up to plinth level :4.1.1 With
20mm nominal size graded stone aggregate.
4.1.1.2 M-20 M-20 – Grade concrete
18 5.1 RCC upto plinth Providing and laying in position specified grade of 5796.00 Cum
reinforced cement concrete (with 20mm nominal size graded stone
aggregate) excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :5.1.1 M-20 M-20 Grade Concrete

19 5.2 RCC in walls, columns, pillars etc Reinforced cement concrete work (with 5865.00 Cum
20 mm nominal size graded stone aggregate) in walls (any thickness),
including attached pilasters, buttresses, plinth and string courses, fillets,
columns, pillars, posts and struts etc. above plinth level and upto floor two
level excluding cost of centering, shuttering, finishing and reinforcement:
5.2.1 M-20 M-20 Grade Concrete
20 5.16 Reinforcement Reinforcement for R.C.C. work including straightening, 62.90 Kg
cutting, bending, placing in position and binding including cost of binding wire
all wastages and overlaps, couplers (overlaps shall be provided as per
requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34
Reinforcement detailing ) etc. complete . (Note:- 1. Spacer bars (chairs) shall
be paid separately as shown in the drawing and as per direction of engineer
in charge. 2. No extra payment shall be done for overlaps and/or couplers.
3.Couplers shall be conforming to IS code on “Reinforcement Couplers for
Mechanical Splices of Bars for Concrete Reinforcement - Specification”)
5.16.6 TMT/TMX Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or
more conforming to IS 1786
21 11.72 Chamfered edge cement concrete paver blocks over Providing and 556.00 Sqm
laying factory made chamfered edge Cement Concrete paver blocks of
required colour strength, thickness pattern, surface texture (smooth/rough)
and size/shape, conforming to 15658-2006 IS marked made by table
vibratory method using PU mould, laid in required colour and pattern over
50mm thick compacted bed of stone dust, compacting and proper
embedding/ laying of inter locking paver blocks into the bedding layer through
vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and
sweeping extra sand including locking edges in 0.30 mm with courtyards,
porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light
traffic parking etc. complete as per manufacturer's specifications and
direction of Engineer-in- Charge. 11.72.2 60mm thick 60 mm thick C.C. paver
block of M-35 grade
22 9.43 M.S. grills and windows Providing and fixing M.S. grills of required 91.00 Kg
pattern in frames of windows etc. with M.S. flats, square or round bars etc.
including priming coat with approved steel primer all complete.
9.43.1 Fixed to steel windows Fixed to steel windows by welding.
S. No. Item of work Rate Unit Amount
23 Centering and shuttering including strutting, propping etc.and removal of form 190.00 Sqm
for : 5.9.1 Upto plinth Foundations, footings, bases of columns, etc. for
concrete upto plinth level
24 Centering and shuttering including strutting, propping etc.and removal of form 219.00 Sqm
for : 5.9.2 Walls Walls (any thickness) in cluding attached pilasters butter
esses, plinth beams and string courses etc.
25 Centering and shuttering including strutting, propping etc.and removal of form 330.00 Sqm
for : 5.9.2 Walls Walls (any thickness) in cluding attached pilasters butter
esses, plinth beams and string courses etc. 5.9.2.2
Above plinth Above plinth upto 3.6 m height from plinth level

26 Centering and shuttering including strutting, propping etc.and removal of form 439.60 Sqm
for : 5.9.3 Suspended floors, roofs etc Suspended floors, roofs, landings,
balconies and access platform.
27 Centering and shuttering including strutting, propping etc.and removal of form 471.20 Sqm
for : 5.9.6 Columns Columns, Pillars, Piers, Abutments, Posts and Struts.
28 6.7 Brick work fly ash bricks insuper structure Brick work with fly ash lime 4936.00 cum
bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above
plinth level up to floor two level in :6.7.3
50 kg / cm2 Having 50 kg / cm2 average compressive strength. 6.7.3.2 CM
1:6 Cement mortar 1:6 (1 cement : 6 sand)
29 6.6 Brick work with bhatta, bricks in superstructure Brick work with well brunt 4350.00 cum
open bhatta, bricks, crushing strength not less than 25kg / cm2 and water
absorption not more than 20% in superstructure above plinth level and up to
floor two level i/c curing etc complete.
6.6.2 CM 1:6 Cement Mortar 1:6 (1 cement : 6 sand)
30 6.15 Half brick masonry fly ash lime bricks Half brick masonry with fly ash 459.00 Sqm
lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super
structure above plinth and upto floor two level. 6.15.3
50 kg/cm2 Having 50 kg/cm2 average compressive strength.
6.15.3.2 CM 1:4 Cement mortar 1 : 4 (1 cement : 4 sand)
31 6.17 Extra for M.S. bars in half brick masonry Extra for providing and placing 127.00 Sqm
in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick
masonry.
32 14.5 Renewing Float glass panes with putty Renewing glass panes, with putty 679.00 Sqm
and nails wherever necessary including racking out the old
putty: 14.5.1 4.0mm Float glass panes of thickness 4 mm
33 9.1 Wood work in frames of doors, windows Providing wood work in frames 71309.00 cum
of doors, windows, clerestory windows and other frames, wrought framed and
fixed in position with hold fast lugs or with dash fasteners of required dia and
length (hold fast lugs or dash fastener shall be paid for separately). 9.1.2 Sal
wood
34 2.26 Under floor filling stone dustSal wood and filling in plinth with crusher
Supplying 672.00 Cum
stone dust / coarse sand under floors including, watering, ramming and
compacting in layers not exceeding 20cm in depth and dressing complete
Note: - Maximum thickness of this layer shall be 20 cm.
35 2.27.1 Hard muram hard copra With hard muram having CBR >12 % at 300.00 Cum
under floors including watering, ramming and compacting (minimum
compaction 95% of MDD) in layers not exceeding 20cm in thickness and
dressing complete. (Note:- maximum thickness of this layer to be provided
shall be 30cm)
36 10.22 Welded built up steel sections Steel work welded in built up sections/ 85.00 Kg
framed work including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer using structural steel etc. as required.
10.22.2 Frame, ladder, railing In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works.
S. No. Item of work Rate Unit Amount
37 21.11 Double glazed hermetically sealed glazing Providing and fixing double 3103.00 Sqm
glazed hermetically sealed glazing in aluminium windows,
ventilators and partition etc. with 6 mm thick clear float glass both
side having 12 mm air gap including providing EPDM gasket, perforated
aluminium spacers, desiccants, sealant (Both primary and secondary sealant
) etc. as per specifications, drawings and direction of
38 9.113 Aluminium handles Engineer-in-Charge complete.
Providing and fixing aluminium handles ISI marked 75.00 each
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or shade with necessary screws etc.
complete: 9.113.1 125 mm
39 9.109 Aluminium sliding door bolts Providing and fixing aluminium sliding 241.00 each
door bolts ISI marked anodised (anodic coating not less than grade AC 10 as
per IS: 1868) transparent or dyed to required colour or shade with nuts and
screws etc. complete: 9.109.1 300mm 300x16 mm
40 21.13 Brass locks Providing and fixing Brass 100 mm mortice latch and lock 400.00 each
with 6 levers without pair of handles (best make of approved quality)
for aluminium doors including necessary cutting and making good etc.
41 21.12 Aluminium Tubular handle bar Providing and fixing aluminium 474.00 No.
tubular handle bar 32 mm outer dia, 3.0 mm thick and length as
required with SS screws etc .complete as per direction of
Engineer-in-Charge. 21.12.3 Polyester powder coated Polyester powder
coated minimum thickness 50 micron aluminium tubular handle bar.

42 9.110 Aluminium tower bolts Providing and fixing aluminium tower bolts ISI 82.00 No.
marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or shade with necessary screws etc.
complete: 9.110.4 200mm 200x10 mm
43 13.2 15 mm cement plaster 15 mm cement plaster on the rough side of 148.00 Sqm
single or half brick wall of mix 13.2.2 1:6 1:6 (1 cement : 6 sand)
44 13.1 12 mm cement plaster 12 mm cement plaster of mix : 138.00 Sqm
13.1.21:6 1:6 (1 cement : 6 sand)
45 13.4 12 mm cement plaster finished with a floating coat 12 mm cement 185.00 Sqm
plaster finished with a floating coat of neat cement of mix : 13.4.2
1:4 1:4 (1 cement : 4 sand)
46 9.18 shutters decorative type 1st class hard wood and well matched teak 3 2370.00 Sqm
ply Providing and fixing ISI marked flush door shutters conforming to IS: 2202
(Part I) decorative type, core of block board construction with frame of 1st
class hard wood and well matched teak 3 ply veneering with vertical grains or
cross bands and face veneers on both faces of shutter. 9.18.2 30 mm butt
47 hinges
9.3 Wood 30work
mm thick including
in frames ISI ceiling
of false markedProviding
Stainlesswood
Steelwork
butt hinges withof
in frames 76229.00 cum
false ceiling, partitions etc. sawn and fixed in position ( with necessary
stainless steel screw) 9.3.1 Sal wood
48 4.11 DPC 50mm thick Providing and laying damp-proof course 50mm thick 247.00 Sqm
with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate
20mm nominal size).
49 11.1 Cement concrete flooring 40mm thick 40 mm thick Cement concrete 270.00 Sqm
flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal
size stone aggregate in panels finished with a floating coat of neat cement
including cement slurry, but excluding the cost of nosing of steps etc.
complete.(Area of panel not to exceed 2.0 sqm)
50 11.49 Ceramic glazed wall tiles Providing and fixing Ceramic glazed wall tiles 676.00 Sqm
300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming
to IS: 15622 of approved make in all Colours& shades, except burgundy,
bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement:
3 sand)preprad same day when mortar is still green jointed with grey cement
slurry @3.3 kg per sqm including pointing the joints with white cement and
matching pigments etc., complete.
S. No. Item of work Rate Unit Amount
51 11.50 Rectified ceramic floor tiles Providing and laying rectified Glazed 644.00 Sqm
Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st
quality conforming to IS : 15622 of approved make in all colours white, ivory,
grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4
sand) including grouting the joints with white cement and matching pigments
etc., complete.
52 13.41 White cement based putty Providing and applying white cement based 74.00 Sqm
putty of average thickness 1 mm, of approved brand over the plastered wall
surface to prepare the surface even and smooth i/c all cost of material, labour
and scaffold etc in all position complete. Note : Putty shall be applied only on
the internal walls, for application on the exterior walls prior permission of
APD/Chief Engineer will be required.
53 13.54 Deluxe multi surface paint Finishing walls by any mechanical or manual 81.00 Sqm
means with Deluxe Multi surface paint system for interiors and exteriors using
Primer as per manufacturers specifications : 13.54.3
Two or more coats Two or more coats applied on walls @ 1.25 ltr/10 sqm.
Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm.
54 9.19 Flush door shutters non-decorative type 1st class hard wood and well 1564.00 Sqm
matched teak 3 ply Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) non-decorative type, core of block board
construction with frame of 1st class hard wood and well matched commercial
3 ply veneering with vertical grains or cross bands and face veneers on both
faces of shutters. 9.19.2 30 mm butt hinges
30 mm thick including ISI marked Stainless Steel butt hinges with necessary
55 screws. and fixing Chlorinated Polyvinyl
18.6 CPVC pipes internal work Providing
Chloride (CPVC) pipes, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one
step CPVC solvent cement and testing of joints
complete as per direction of Engineer-in-Charge 18.6.2 Concealed
Concealed work including cutting chases and making good the walls etc.
18.6.2.1 15 mm 15 mm nominal outer dia .Pipes. 207.00 Rmt.
18.6.2.3 25 mm 25 mm nominal outer dia .Pipes. 288.00 Rmt.
56 18.31 C.P. brass bib cock 15 mm dia Providing and fixing C.P. brass bib cock 458.00 No.
of approved quality conforming to IS: 8931, 15 mm nominal bore.
57 18.6 CPVC pipes internal work Providing and fixing Chlorinated Polyvinyl 288.00 Rmt.
Chloride (CPVC) pipes, having thermal stability for hot and cold water supply
including all CPVC plain and brass threaded fittings i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one
step CPVC solvent cement and testing of joints
complete as per direction of Engineer-in-Charge .External Work
18.7.3 25 mm 25 mm nominal outer dia .Pipes. 185.00 Rmt.
58 18.13 CPVC gate valve Providing and fixing CPVC gate valve with kob of 428.00 No.
approved quality. 18.13.1 25 mm dia 25 mm nominal bore
59 Providing and fixing uPVC trap of self cleansing design complete including 465.30 No.
cost of cutting and making good the walls and floors
17.61.1 100mm inlet and 75mm outlet Page No. 302
60 10.36 Concertina coil fencing Providing and fixing concertina coil fencing with 275.00 Rmt.
punched tape concertina coil 600 mm dia 10 metre openable length (total
length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of
wall with existing angle iron 'Y' shaped placed 2.4m or 3.00m apart and with 9
horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I.
clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to
angle iron, all complete as per direction of Engineer-in charge, with reinforced
barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength
of 165 kg/ sq mm with tape .......
S. No. Item of work Rate Unit Amount
64 17.58 Unplasticised rigid PVC soil and waste pipes Providing and fixing
unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B
including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for
thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm.
(minimum wall thickness 3.2mm)

17.58.1 75mm dia 75 mm diameter 136.00 Rmt.

17.58.2 110mm dia 110 mm diameter 238.00 Rmt.

62 17.59 Unplasticised PVC pipe fittings Providing and fixing unplasticised

PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and
waste pipes conforming to IS: 13592 Type A including jointing with seal
ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

17.59.5.1 75 mm 75 mm bend 117.00 No.

17.59.5.2 110 mm 110 mm bend 172.00 No.
17.59.4.1 75 mm 75x75x75 mm 201.00 No.
17.59.4.2 110 mm 110x110x110 mm 266.00 No.
63 18.28 Polyethylene water storage tank Providing and placing on terrace (at all 7.00 Lit
floor levels) polyethylene water storage tank ISI : 12701 marked
with cover and suitable locking arrangement and making necessary holes for
inlet, outlet and overflow pipes but without fittings and the base support for
tank

64 17.17 Water closet Indian type Providing and fixing white vitreous china water 1322.00 No.
closet squatting pan (Indian type) 17.17.2 Orissa pattern Orissa pattern W.C.
pan of size 580x440 mm

65 19.4 Unplasticised PVC pipe Below ground Providing and laying below
ground unplasticised PVC pipe to with stand working pressure of 4 kg/ cm2
soild waste pipes confirming to IS:13592 and IS:4985 including jointing with
seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all
necessary fittings etc. complete. Excavation to be
paid seperataly.

19.4.2 160 mm dia 160 mm diameter OD (min. wall thickness 4.0mm) 477.00 Rmt.

66 19.5 Cement concrete 1:3:6 all-round unplasticised PVC pipes Providing and
laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate
20 mm nominal size) all-round PVC. pipes including bed
concrete as per standard design:

19.5.2 160 mm dia 160 mm diameter PVC. Pipe 704.00 Rmt.

67 19.27 Road gully chamber 50x45x60cm Constructing brick masonry 3941.00 No.
road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement :
4 sand) including 500x450 mm precast R.C.C. horizontal
grating with frame complete as per standard design : 19.27.1 Well burnt
bricks With well burnt bricks

68 19.31 Soak pit square Constructing soak pit 1.20x1.20x1.20m filled with 3172.00 No.
brickbats including S.W. drain pipe 100 mm diameter and 1.20m long
complete as per standard design.
S. No. Item of work Rate Unit Amount
69 9.172 WPC solid board Providing and fixing factory made single extruded 3083.95 Sqm
WPC (Wood Polymer Composite) solid board one side white colour and other
side of board laminated with PVC foil of minimum 14 micron thickness of
approved design pasted with hot melt adhesive for cup boards, work stations
and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin
polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural
fibers (wood powder/ rice husk/wheat husk) and non toxic additives
(maximum toxicity index of 12 for 100 gms) having minimum density of 650
kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N(Edge),
minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2
and resistance to spread of flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant and fixing with
stainless steel piano hinges/soft close clip on concealed hinges of required
size with necessary full body threaded star headed counter sunk S.S screws,
all as per direction of Engineer-In-Charge. (Note: stainless steel piano
hinges/soft close clip on concealed hinges and necessary S.S screws shall
be paid separately) 9.172.2 25 mm thick

70 9.169 Factory made solid wood plastic composite (WPC) doorframes 459.00 Rmt
Providing and fixing factory made single extruded WPC(Wood Polymer
Composite) solid door/window/ceosetory windows and other frames/
chowkhat comprising of virgin polymer of K value 58-60 (Suspension Grade),
calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk)
and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated
with miter joints after applying PVC solvent cement and screwed with full
body threaded star headed S.S. screws having minimum density of 750
kg/m3 and screw withdrawal strength of 2200 N (Face) & 900 N (Edge),
minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/ mm2
and resistance to spread of flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant and fixed in
position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length
complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S.
dash fasteners shall be paid separately) 9.169.1 75 mm X 50 mm
Single rebate (75 mm X 50 mm)

71 17.1 W.C. Indian type with flushing cistern Providing and fixing water closet 2995.00 No.
squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap,
UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever) conforming to IS :
7231, with all fittings and fixtures complete
including cutting and making good the walls and floors wherever required :
17.1.1 Size 580x440mm White Vitreous china Orissa pattern
W.C. pan of size 580x440mm with integral type foot rests.
72 17.2 W.C. European type PVC flushing cistern Providing and fixin white 3036.00 No.
vitreous china pedestal type water closet (European type W.C. pan with seat
and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe,
with manually controlled device (handle lever), conforming to IS : 7231, with
all fittings and fixtures complete including cutting and
making good the walls and floors wherever required: 17.2.1 Whit plastic seat
cover and lid W.C. pan with ISI marked white solid plastic seat and lid
S. No. Item of work Rate Unit Amount
73 12.1 Corrugated G.S. sheet roofing 726.00 sqm
Providing corrugated G.S. sheet roofing including vertical/ curved surface
fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with
bitumen and G.I. limpet washers or with G.I. limpet washers filled with white
lead and including a coat of approved steel primer and two coats of approved
paint on overlapping of sheets complete upto any pitch in horizontal/ vertical
or curved surfaces) excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required. 12.1.3 0.63 mm thick
with zinc coating not less than 275gm/m²
74 11.78 Vitrified floor tiles multi charged Providing and laying vitrified floor tiles 1104.00 sqm
Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished
self design, in different size with water absorption less than 0.05% and
conforming to IS:15622 of approved make in all colours& shades, quality/
premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement
:4sand) including grouting the joints with white cement and matching
pigments etc. complete 11. 78.1 Light shade
In light shade glossy/ rustic /stain finished 11. 78.1.1 600X600
Size 600X600 mm thickness 9-10 mm
75 17.14 Kitchen sink (stainless Steel) Providing and fixing Stainless Steel A ISI 4351.00 Each
304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel
plug 40 mm including painting of fittings and brackets, cutting and making
good the walls wherever required : 17.14.2 Without drain board Kitchen sink
without drain board 17.14.2.2 Depth 200mm 610x460 mm bowl depth 200
mm.
76 17.11 Wash basin Providing and fixing wash basin with C.I. brackets, 15 mm 1938.00 Each
C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls wherever
require :17.11.3 550x400 mm flat back pair of pillar cock (china clay) White
Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.
brass pillar taps.

77 11.35 930.00 Sqm

Kota stone flooring
Kota stone slab flooring over 20 mm (average) thick base laid over and
jointed with grey cement slurry mixed with pigment to match the shade of the
slab including rubbing and polishing complete with base of cement mortar 1 :
4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm)

78 11.37 Kota stone in risers, skirting, dado and pillars 994.00 Sqm
Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with
grey cement slurry mixed with pigment to match the shade of the slabs,
including rubbing and polishing complete. 11.37.2 20 mm thick 20 mm thick

79 11.29 2642.00 Sqm

Mirror polished pre moulded granite flooring18 mm thick
Providing and laying gang saw cut 18 mm thick, mirror polished premoulded
(wherever required) and pre polished machine cut granite stonework in
flooring of required size shape of approved shade, color and texture in
flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand)
including grouting the joints with white cement mixed with matching pigments
epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
11.29.1 Stone slab over 0.50sqm Area of slab over 0.50 s 11.29.1.1 Granite
(fine grained) Fine grained granite dark Black/dark Red/ White or equivalent
with self design/ pattern/crystals of other colors of glitter
S. No. Item of work Rate Unit Amount
80 25.3 Wall Hung WC Providing and fixing white vitreous china European Wall 21040.00 Each
hung Anti germ Fluoro-Polymer Coated water closet of approved shape with
soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly
Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3
litre/6 litre, with all fittings and fixtures
complete including cutting and making good the wall and floors wherever
required. 25.3.1 Size 350 X 360 X 545mm Anti germ Fluoro-Polymer Coated
(Nano coating) Wall hung water closet Size 350 X 360 X 545mm
with solid poly propelyne made soft closing seat cover (Premium Range)
81 25.35 Shower rose 240mm Providing and fixing in position best Indian 6501.00 No.
shower rose 240mm body and face chrome plated, brass made body, Silicon
based Rubbit cleaning nozzles.(Premium Range)
82 25.39 Bib cock (auto) Providing and fixing in position best Indian Auto 1796.00 No.
Closing Bib Cock (with DECOL cartridge) for common area use. (Premium
Range)
83 25.10 Counter Top Wash Basin Providing and fixing white vitreous china type 19114.00 No.
Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted
single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn
angular stop cock, 32 mm C. P. brass made waste coupling length 130mm
and 32 mm C. P. Brass Made Bottle Trap size 200x300mm fittings and
fixtures complete including Painting of
fittings and cutting and making good the wall and floors wherever required.
25.10.1 Size 190x600x435 mm White Vetrious China Anti germ Fluoro-
Polymer Coated Wash Basin Size 190x600x435mm with
Table mounted single lever Tall boy basin
mixture, (cartridge size 32mm.) (Premium Range)
84 12.11 Extra for wind ties 121.00 Rmt
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
85 12.15 652.00 Rmt
Precoated G.I. profile sheets Providing and fixing precoated galvanised iron
profile sheets (size, shape and pitch of corrugation as approved by Engineer-
in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120
gsm as per IS: 277 in 240 mpa steel grade, 5-7microns epoxy primer on both
side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches while
transportation and should be supplied in single length upto 12 metre or as
desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-
tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch
in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters
and trusses and including cutting to size and shape wherever required.

86 12.16 Precoated G.S. sheet roofing Providing and fixing precoated 320.00 Rmt
galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated
thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns using self-drilling/ self-tapping screws complete :
12.16.1 Ridge Ridges plain (500 - 600mm).
87 12.5 G.S. valleys Providing valleys of 90cm wide overall in plain G.S. sheet 994.00 Rmt
fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet
and bitumen washers complete. 1.60 mm thick with zinc coating not less than
350gm/m²
S. No. Item of work Rate Unit Amount
88 10.14 Steel work in built up tubular trusses/frame Steel work in built up M.S. 108.00 Kg
tubular section (round, square or rectangular hollow tubes etc.) trusses/frame
work etc. including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer, including welding and bolted with special
shaped washers etc. complete.
10.14.1 Hot finished welded tubes Hot finished welded type tubes

89 22.22 Water proofing with fibre glass mesh and two component acrylic 465.00 Rmt
resin Water proofing treatment over Roof, Wall, Chajjas, Balcony with
Diamond Shield and Sealer coat or equivelent at leakage/ seepage area
consisting of (i) Surface preparation roughening of surface, opening of cracks
in 'V' groove in size of 5mmx10mm (WxD), filling of cracks with putty of
Diamond shield with laying fiber glass mesh, Cleaning of surface by
scrubbing with steel wire/ Nylon brush. Removing all dust particles and
washing with adequate water to clean completely. (ii) Providing and applying
1st coat of diamond shield or equivelent (minimum thicknes 70-80 micron) (a
two component flexible waterproof and protective modified mortar, dry
powder 80% Chemical 20% acrylic resin having 30% solid contents) with mix
proportion of Paart 1 and 2 with proper mixing with laying of fiber glass mesh
(of weaving size of 10x10 yarn/inch duly coated with alkaline resistant
polymer). Allow the coating to air cure for minimum 2 Hrs. (Diamond Shield or
equivelent. After two hours minimum of 1st coat applying 2nd coat (minimum
thickness 100 micron) of diamond shield or equivelent with mix proportion of
part 1 and part 2 with proper mixing. Allow the coating to air cure for
minimum 2 Hrs. Consumption of the diamond shild or equivelent should be
@17.90
kg for 10sqm area. (After two coats of diamond shield, surface is to be cured
properly minimum for 4 hrs.before application of third coat). (iii) Providing and
applying 1st coat of sealer coat 50-60 micron (single component High build
elastomeric, flexible, pure acrylic waterproofing membrans having solid
content of 65%) and allow it to air cure for 4 Hrs minimum. After two hours
90 22.14 Roof grading Grading roof for receiving water proofing 6569.00 cum
treatment with 22.14.1 C.C. 1:2:4 Cement concrete 1:2:4 (1 cement : 2 sand :
4 graded stone aggregate 20 mm nominal size)
91 22.12 Deduct for omitting water proofing treatment final course 6mm 10.00 Sqm
grit Deduct for omitting in water proofing treatment final course of spreading
stone grit 6mm down size or pea sized gravel at 6 cudm
per sqm.

92 9.124 Fly proof stainless steel wire gauge, to windows Providing and fixing fly 1689.00 Sqm
proof stainless steel grade 304 wire gauge, to windows and clerestory
windows using wire gauge with average width of aperture 1.4 mm in both
directions with wire of dia. 0.50 mm all complete. 9.124.1
T.W. beading With 2nd class teak wood beading 62x19 mm.

93 11.17 Chequeredmosaic tiles Chequeredterrazo tiles 22 mm thick with 807.00 Sqm

graded marble chips of size up to 6 mm in floors jointed with neat cement
slurry mixed with pigment to match the shade of the tiles including rubbing
and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement
:4 sand) : 11.17.2 Medium shades pigment (white& grey cement) Medium
shade pigment using 50% white cement, 50% ordinary cement.

94 11.42 Mirror (glass) polishing Mirror polishing on marble work/Granite 164.00 Sqm
work/stone work wherever required to give high gloss finish complete.
S. No. Item of work Rate Unit Amount
95 10.35 Fencing with G.I. chain link fabric 3mm dia Providing and fixing G.I. 574.00 Sqm
chain link fabric fencing of required width in mesh size 25x25 mm made of
G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts,
bolts and washers as required complete, with posts of specified material and
of standard design placed and embedded in cement concrete blocks
45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate
40mm nominal size) every 15th post, last but one end post and corner post
shall be strutted on both sides and end post on one side only and struts
embedded in cement concrete blocks 70x45x50cm of the same mix, as per
the direction of Engineer-in-Charge. (cost of post painting earth work & C.C.
to be paid separately)
96 14.2 Fixing chowkhats with holdfasts Fixing chowkhats in existing opening
including embedding chowkhats in floors or walls cutting masonry for
holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x
10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone
aggregate 20 mm nominal size), painting two coats of approved wood
preservative to sides of chowkhats and making good the damages to walls
and floors as required complete including disposal of rubbish to the dumping
ground within 50 meters lead :
14.2.1 Door Door chowkhats 544.00 Each
14.2.2 Window Window chowkhats 325.00 Each
97 14.1 Repairs to plaster Repairs to plaster of thickness 12mm to 20mm in 180.00 Sqm
patches of area 2.5 sq. metres and under including cutting the patch in
proper shape, raking out joints and preparing and plastering the
surface of the walls complete including disposal of rubbish to the dumping
ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).

Sub Engineer Sub Divisional Officer, Executive Engineer

P.W.D.Sub Division No-2 P.W.D. Division,
Balaghat Balaghat