Unity 06 Motorgate
Unity 06 Motorgate
Unity 06 Motorgate
Motorgate
F.L.Smidth A/S - Automation
Høffdingsvej 34
DK-2500 Valby
Copenhagen
Denmark
+45 36 18 27 00
Fax: +45 36 18 27 99
Printing History:
Disclaimer:
The information in this document is subject to change without notice and should not be construed, as a commitment by
F.L.Smidth A/S. F.L.Smidth assumes no responsibility for any errors that may appear in this document.
In no event shall F.L.Smidth be liable for direct, indirect, special, incidental or consequential damages of any nature
or kind arising from the use of this document, nor shall F.L.Smidth be liable for incidental or consequential damages
arising from use of any software or hardware described in this document.
Options specified and described in the F.L.Smidth documentation as part of the general description - but initially
neither ordered by the customer nor confirmed by the seller - will not commit the supplier to any further and future
supply and/or installation.
The software described in this document is furnished under a license and may be used, copied, or disclosed only in
accordance with the terms of such license.
General
Purpose
This manual contains a PLC specific description of ACESYS for the Schneider
Electric Unity controllers. This version of ACESYS for Unity is designed for the
HMI system ECS.
This manual has to be seen in consecutive with the generic ACESYS manual.
Motorgate
Section
Afterwards attached the section to the Functional Section parent section (group or
route):
Variable Definitions
One tag of the type “ACESYS_MOTORGATE_FACEPLATE” has to be created
for each Motorgate object:
This tag contains information to/from ECS. Address definition is required for data
exchange with ECS. For further information about address see chapter Introduction
section Memory Allocation.
4
2
Unit = 45:
3
1
4
2 5
ACESYS Version and Build Number indicate the version of the PLC function
block.
Program State expresses the current state of the function for debugging purposes.