Trafic 1120 10 - ENG
Trafic 1120 10 - ENG
Trafic 1120 10 - ENG
ELF, partner of
www.lubricants.elf.com
A brand from
Welcome to your new vehicle
This driver’s handbook contains the information necessary:
– for you to familiarise yourself with your vehicle, to use it to its best advantage and to benefit fully from the all the functions and
the technical developments it incorporates.
– to ensure that it always gives the best performance by following the simple, but comprehensive advice concerning regular main-
tenance.
– to enable you to deal quickly with minor faults not requiring specialist attention.
It is well worth taking a few minutes to read this handbook to familiarise yourself with the information and guidelines it contains
about the vehicle and its functions and new features. If certain points are still unclear, our Network technicians will be only too
pleased to provide you with any additional information.
To help you, you will find the following symbols:
and These appear in the vehicle and indicate that you should consult the manual for detailed information and/or
limits on operations with respect to your vehicle’s equipment.
anywhere in the manual indicates a hazard, danger or a safety recommendation.
The descriptions of the models given in this handbook are based on the technical specifications at the time of writing. This hand-
book covers all items of equipment (both standard and optional) available for these models but whether or not these are
fitted to the vehicle depends on the version, options selected and the country where the vehicle is sold.
This handbook may also contain information about items of equipment to be introduced later in the model year.
Translated from French. Copying or translation, in part or in full, is forbidden unless prior written permission has been obtained from the car manufacturer.
0.1
0.2
C O N T E N T S
Sections
Driving ................................................................... 2
Maintenance ......................................................... 4
0.3
0.4
Section 1: Getting to know your vehicle
Key, remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2
RENAULT card: General information, use, deadlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7
Opening and closing the doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.14
Tailgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.22
Locking, unlocking the opening elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.23
Automatic locking when driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.27
Headrests - Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.28
Steering wheel/Power-assisted steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.31
Seat belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.32
Additional methods of restraint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.37
in addition to the front seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.37
to the rear seatbelt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.41
side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.42
Child safety: General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.44
Choosing a child seat mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.47
fitting a child seat, general information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.49
Child seats: attachment by seat belt or by Isofix system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.51
Child safety: deactivating/activating the front passenger airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.77
Driving position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.80
Instrument panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.84
Trip computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.90
Clock and outdoor temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.99
Rear view mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.101
Exterior lighting and signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.103
Headlight beam adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.107
Audible and visual signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.109
Washers, wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.110
Fuel tank (filling with fuel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.113
Reagent tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.116
1.1
KEY, RADIO FREQUENCY REMOTE CONTROLS: general information (1/2)
A B
Advice
Avoid leaving the remote control in
hot, cold or humid areas.
3 3
2 2
1
1 Driver’s responsibility
when parking or stopping
the vehicle
Never leave an animal,
child or adult who is not self-suffi-
4 cient alone in your vehicle, even for
a short time.
Radio frequency remote 4 Locks/unlocks the boot and, depend- They may pose a risk to themselves
ing on the vehicle, the side sliding or to others by starting the engine,
control A or B activating equipment such as the
door.
1 Ignition-starter key, door key. electric windows or locking the
2 Locking the doors and tailgate. doors, for example.
3 Unlocks all doors and boot or, de-
Also, in hot and/or sunny weather,
pending on the vehicle, the driver’s
please remember that the tempera-
door only. Refer to the information on
ture inside the passenger compart-
“Key, radio frequency remote con-
ment increases very quickly.
trol: use” in Section 1.
RISK OF DEATH OR SERIOUS
INJURY.
1.2
KEY, RADIO FREQUENCY REMOTE CONTROLS: general information (2/2)
Radio frequency remote
control operating range
This varies according to the environ-
ment: take care not to lock or unlock
the doors by inadvertently pressing the
buttons on the remote control. For replacement, or if you
require an additional remote
Note: on certain vehicles, if a door is
control.
not opened within approximately 2 min-
You must only contact an approved
utes of the door being unlocked by
Dealer.
remote control, the doors will lock again
– To replace a remote control, the
automatically.
vehicle and all its keys must be
taken to an authorised dealer
Interference as the vehicle and remote con-
trol are required to initialise the
Interference by factors in the immediate
system.
vicinity (external installations or the use
– Depending on the vehicle, you
of equipment operating on the same
have the option of using up to
frequency as the remote control) may
four remote controls.
affect the operation of the remote con-
trol. Remote control unit failure
Make sure that the correct battery
type is being used, and that the
battery is in good condition and in-
serted correctly. These batteries
have a service life of approximately
two years.
To learn how to change the battery,
please refer to the information on
the “Key, radio frequency remote
control: Batteries” in Section 5.
1.3
KEYS, RADIO FREQUENCY REMOTE CONTROL: use (1/2)
Note: if a door is not opened within ap-
proximately 2 minutes of the door being
unlocked by the remote control, the
doors will lock again automatically.
2 1
1
Driver’s responsibility
when parking or stopping
2 the vehicle
Never leave an animal,
3 child or adult who is not self-suffi-
cient alone in your vehicle, even for
a short time.
Unlocking the doors and A short press on button 3 unlocks the They may pose a risk to themselves
rear doors and, depending on the vehi- or to others by starting the engine,
tailgate activating equipment such as the
cle, the sliding side doors.
For vehicles not fitted with electric windows or locking the
The hazard warning lights and indica- doors, for example.
unlocking of the driver’s door only tor lights flash once to indicate that the
Pressing and holding button 2 unlocks doors have unlocked. Also, in hot and/or sunny weather,
all the opening elements. please remember that the tempera-
ture inside the passenger compart-
For vehicles fitted with unlocking of ment increases very quickly.
the driver’s door only RISK OF DEATH OR SERIOUS
A single press on button 2 unlocks INJURY.
the driver’s door only. A second press
within approximately 20 seconds after
the first press unlocks all the doors. The key must not be used for any
function other than those described
in the handbook (removing the cap
from a bottle, etc.).
1.4
KEYS, RADIO FREQUENCY REMOTE CONTROL: use (2/2)
2 1
2
3
1.5
DEADLOCKING
1 1
1.6
RENAULT CARD: general information (1/2)
The RENAULT card is used RENAULT card operating
for: range
– locking and unlocking the doors This varies according to the surround-
1 2 3 4 5 (refer to the following pages); ings: when handling the RENAULT
– switch on the vehicle lighting re- card, it is important to make sure that
motely (refer to the following pages); you do not lock or unlock the doors by
– starting the engine; refer to the in- inadvertently pressing the buttons.
formation on “Starting the engine” in
Section 2.
Driver’s responsibility
when parking or stopping
Battery life the vehicle
Make sure that the correct battery type
is being used, and that the battery is in Never leave an animal,
good condition and inserted correctly. child or adult who is not self-suffi-
Its service life is approximately two cient alone in your vehicle, even for
1 Unlocking the doors and tailgate. years: replace it when the message a short time.
2 Locking all doors and tailgate. “KEYCARD BATTERY LOW” appears They may pose a risk to themselves
3 Switch on the courtesy lighting re- on the instrument panel (refer to the in- or to others by starting the engine,
motely. formation on the “RENAULT card: bat- activating equipment such as the
4 Locking/unlocking the boot and the tery" in section 5). electric windows or locking the
sliding side doors. doors, for example.
5 Integrated key. Also, in hot and/or sunny weather,
please remember that the tempera-
ture inside the passenger compart-
ment increases very quickly.
RISK OF DEATH OR SERIOUS
INJURY.
When the battery is flat, you can
still lock/unlock and start your ve-
hicle. Refer to the information on
“Locking/unlocking the doors” in
Section 1 and “Starting the engine”
in Section 2.
1.7
RENAULT CARD: general information (2/2)
Access to key 5
Press button 6 and pull on key 5 then
release the button.
1.8
“HANDS-FREE” RENAULT CARD: usage (1/4)
Locking/unlocking the
vehicle
There are two ways to unlock/lock the
vehicle: be within the access zone or
using the card RENAULT.
1 1
Driver’s responsibility
when parking or stopping
the vehicle
Never leave an animal,
child or adult who is not self-suffi-
cient alone in your vehicle, even for
1 a short time.
It allows locking/unlocking without input They may pose a risk to themselves
on the card RENAULT when within the or to others by starting the engine,
access zone 1. activating equipment such as the
electric windows or locking the
doors, for example.
Also, in hot and/or sunny weather,
please remember that the tempera-
ture inside the passenger compart-
ment increases very quickly.
RISK OF DEATH OR SERIOUS
INJURY.
1.9
“HANDS-FREE” RENAULT CARD: usage (2/4)
Special features relating to vehicle
locking
– When locking, if a door is open or in-
correctly closed, the vehicle will lock
and unlock in quick succession with-
out the hazard warning lights flash-
2 ing;
– after locking by pressing button 2,
you have to wait approximately
3 seconds to be able to unlock the
vehicle again.
1.10
“HANDS-FREE” RENAULT CARD: usage (3/4)
1 1
3
Driver’s responsibility
when parking or stopping
the vehicle
Never leave an animal,
child or adult who is not self-suffi-
cient alone in your vehicle, even for
1 a short time.
Unlocking with the card RENAULT Special note: They may pose a risk to themselves
The vehicle will not lock if: or to others by starting the engine,
Press the button 3. activating equipment such as the
The hazard warning lights flash once – a door is open or not properly closed;
– the card is not in the zone 1. electric windows or locking the
to indicate that the doors have been un- doors, for example.
locked.
Also, in hot and/or sunny weather,
Locking using the RENAULT card please remember that the tempera-
With the doors closed, press button 4: ture inside the passenger compart-
the vehicle will lock. ment increases very quickly.
1.11
“HANDS-FREE” RENAULT CARD: usage (4/4)
Rear opening elements
locking/unlocking
6 Press button 7 to lock/unlock the rear
hinged doors or the tailgate and, de-
pending on the vehicle, the side doors.
7
5 The hazard warning lights flashing noti-
fies you of the status of the rear open-
ing elements:
– two flashes indicate that the rear
opening elements are locked;
– one flash indicates that the rear
opening elements are unlocked.
1.12
RENAULT CARD: deadlocking
To deactivate deadlocking
Unlock the vehicle using button 1 on
the RENAULT card.
1 2
The hazard warning lights flash once to
indicate that the doors have been un-
locked.
1.13
FRONT DOORS (1/2)
1 Driver’s responsibility
when parking or stopping
the vehicle
Never leave an animal,
4 child or adult who is not self-suffi-
2 cient alone on your vehicle, even for
a short time.
They may pose a risk to themselves
Opening the doors from the Opening from the inside or to others by starting the engine,
outside activating equipment such as the
Pull handle 4 and push the door.
electric windows or locking the
Vehicles with a remote control doors.
Unlock the vehicle using the remote Closing from the inside Also, in hot and/or sunny weather,
control and pull handle 1. please remember that the tempera-
Pull the door exclusively using handle 3. ture inside the passenger compart-
Vehicles with RENAULT card
With the card on your person, press ment increases very quickly.
button 2 to unlock the vehicle and pull RISK OF DEATH OR SERIOUS
handle 1. INJURY.
1.14
FRONT DOORS (2/2)
Lights-on reminder buzzer Door/tailgate open buzzer
If you have switched off the ignition If a door is open or not properly closed,
and left the lights switched on, a re- as soon as the vehicle reaches a speed
minder buzzer will sound when a door of approximately 12 mph (20 km/h), the
is opened. message “Door open” will appear on
the instrument panel, accompanied by
a warning light.
Card reminder buzzer
(depending on the vehicle)
On opening the driver’s door, if the Special note
card is still in the reader, the message Depending on the vehicle, accessories
“PLEASE REMOVE KEYCARD” is dis- (e.g. radio) stop working either when
played on the instrument panel accom- the engine is switched off or when the
panied by a warning beep. driver’s door is opened or when the
doors are locked.
Key reminder alarm
(depending on the vehicle)
If you have left the key in the ignition,
an alarm will sound when the driver’s
door is opened.
1.15
SLIDING SIDE DOOR (1/2)
Closing from the outside
Pull handle 1 and slide the door to-
wards the front of the vehicle until it
closes completely.
2
Closing from the inside
3 Pull lever 2 towards the front and close
1 the door until it latches.
1.16
SLIDING SIDE DOOR (2/2)
Recommendations concer-
ning the sliding side door.
Care must be taken when
opening or closing the sli-
ding door, as is the case for any of
the opening elements on the vehi-
cle:
Driver’s responsibility – Check that the door will not come
4 when parking or stopping into contact with any person, part
the vehicle of the body, animal or object.
Never leave an animal,
child or adult who is not self-suffi- – Only use the handles on the
cient alone on your vehicle, even for inside and outside of the door to
a short time. operate it.
They may pose a risk to themselves – Take care when opening and clo-
Child safety or to others by starting the engine, sing the door.
activating equipment such as the
To make it impossible for the rear doors – Take particular care when the
electric windows or locking the
to be opened from the inside, move vehicle is parked on a slope:
doors.
screw 4 and close the door. open or close the door fully until
Also, in hot and/or sunny weather,
Check from the inside that all the doors please remember that the tempera- it latches into its locking position.
are locked. ture inside the passenger compart- – Before moving off, always ensure
The door can only be opened from the ment increases very quickly. that the sliding door is properly
outside of the vehicle. RISK OF DEATH OR SERIOUS closed.
INJURY.
1.17
REAR HINGED DOORS (1/4)
3
2
Opening the doors from the Pull the lever 3 to open the door.
outside
Vehicles with a remote control
Unlock the vehicle using the remote
control and pull handle 1.
Vehicles with RENAULT card If the vehicle is parked on
With the card on your person, press the hard shoulder with tail-
button 2 to unlock the vehicle and pull gate open, the rear lights
handle 1. may be obscured. You
should make other road users aware
of your vehicle by using a warning
triangle or other equipment speci-
fied by the road traffic regulations of
the country you are driving in.
1.18
REAR HINGED DOORS (2/4)
4
1.19
REAR HINGED DOORS (3/4)
7
6
1.20
REAR HINGED DOORS (4/4)
Opening from the inside
Pull the handle 9 and push the door A.
Pull the lever 3 and open the door B.
8
9 B
A 3
To unlock the door A, refer to the infor- Closing from the inside
mation on “Central door locking/unlock-
ing” in Section 1. Partially close door B, then slam it shut.
Then repeat this with door A.
Manual locking/unlocking
from the inside
Turn the button 8 clockwise to lock the
door A.
Turn the button 8 anticlockwise to
unlock the door A.
1.21
TAILGATE
To open
With the tailgate unlocked, press the
button 1 and lift the tailgate.
1.22
CENTRAL LOCKING, UNLOCKING OF OPENING ELEMENTS (1/2)
Locking the opening
elements without the
RENAULT card or the key
For example, in the event of a dis-
charged battery or the RENAULT card
or key temporarily not working, etc.
With the engine off, the rear doors
closed and a front door open, press
switch 1 for more than five seconds.
1 Make sure you have your key or
RENAULT card with you before leaving
your vehicle.
When the door is closed, all the doors
and tailgate will be locked.
Interior locking/unlocking Unlocking from the outside can only be
door control done using the key or the RENAULT
The switch 1 simultaneously controls all card.
the doors.
If a door is open or not properly closed,
the doors lock and then quickly unlock.
If you need to transport objects with the
boot open, the other opening elements
can still be locked: with the engine
stopped, press switch 1 for more than After locking/unlocking the vehicle
five seconds to lock the other opening using the buttons on the RENAULT
elements. card, "hands-free" locking and un-
locking is deactivated.
To reactivate the “hands-free” mode:
restart the vehicle. Never leave your vehicle
with the key or RENAULT
card inside.
1.23
CENTRAL LOCKING, UNLOCKING OF OPENING ELEMENTS (2/2)
Locking the doors with the
tailgate open
To lock the vehicle with the boot open
(e.g. when transporting something in
the boot which prevents it from being
closed), or when the vehicle is located
in a zone of high electromagnetic radia-
tion, or if the card or key is faulty: with Driver’s responsibility
the engine switched off, press and hold when parking or stopping
switch 1 for more than five seconds. the vehicle
1 NB: If you close the boot, it will lock. Never leave an animal,
child or adult who is not self-suffi-
cient alone in your vehicle, even for
a short time.
Doors and tailgate status They may pose a risk to themselves
or to others by starting the engine,
indicator light activating equipment such as the
When the ignition is on, the indicator electric windows or locking the
light integrated in switch 1 informs you doors, for example.
of the status of the doors and tailgate:
Also, in hot and/or sunny weather,
– indicator light on, the doors and tail-
please remember that the tempera-
gate are locked;
ture inside the passenger compart-
– light off, the doors and tailgate are
ment increases very quickly.
unlocked.
RISK OF DEATH OR SERIOUS
When the ignition is off, the indicator Driver’s responsibility INJURY.
light remains lit and then goes out when
you lock the doors. If you decide to keep the
doors locked when you are
driving, remember that it
may be more difficult for those as-
sisting you to gain access to the
passenger compartment in the
event of an emergency.
1.24
MANUAL DOOR LOCKING, UNLOCKING (1/2)
Locking/unlocking from the
outside
This is done using the remote control or
the RENAULT card: refer to the informa-
tion on “Radio frequency remote con-
trol: general information” or “RENAULT
card: general information” in Section 1.
In some cases, the radio frequency 1 1
remote control or the RENAULT card
may not work:
– RENAULT card/radio frequency
remote control battery worn or run
flat.
– if equipment operating on the same
frequency as the card (mobile It is then possible: Using the key
phones, etc.) is used;
– depending on the vehicle, use the Insert the key into the lock 1 and lock or
– vehicle located in a high electromag- radio frequency remote control or the unlock the front left-hand door and, de-
netic radiation zone. emergency key integrated in the card pending on the vehicle, the rear hinged
to unlock the front left-hand door, or door.
depending on the vehicle, the rear
hinged door;
– to lock each of the doors manually;
– use the interior locking/unlocking
door control (please refer to the in-
formation on “Locking and unlocking
the opening elements” in Section 1).
1.25
MANUAL DOOR LOCKING, UNLOCKING (2/2)
Special feature on vehicles with a
tailgate
After manually locking the doors, the
tailgate remains unlocked.
2 Driver’s responsibility
when parking or stopping
the vehicle
Never leave an animal,
child or adult who is not self-suffi-
cient alone on your vehicle, even for
a short time.
They may pose a risk to themselves
or to others by starting the engine,
Locking the doors manually activating equipment such as the
Turn screw 2 with the door open (using electric windows or locking the
the end of the key) and close the door. doors.
This means that the doors are then Also, in hot and/or sunny weather,
locked from the outside. please remember that the tempera-
The doors may then only be opened ture inside the passenger compart-
from inside the vehicle or with the key ment increases very quickly.
for the front doors.
RISK OF DEATH OR SERIOUS
INJURY.
1.26
RENAULT ANTI-INTRUDER DEVICE (RAID)
To deactivate Operating faults
With the ignition on, press and hold If you notice an operating fault (auto-
switch 1 for approximately 5 seconds, matic locking impossible), first check
until you hear a beep. that all doors are correctly locked. If
they are correctly locked and the fault
is still present, contact an approved
Operating principle Dealer.
After the vehicle is started, the system Also make sure that locking has not
automatically locks the doors once your been inadvertently deactivated.
speed reaches approximately 4 mph
(7 km/h). If it has, switch the ignition off and on
1 again and reactivate it.
The door can be unlocked:
– by pressing the door unlocking
button 1.
You can decide whether you want to – by opening a front door (vehicle sta-
activate this function. tionary).
NB: If a door is opened or closed, it will
To activate automatically lock again when the vehi-
cle reaches a speed of 4 mph (7 km/h).
With the ignition on, press switch 1
for approximately 5 seconds until you
hear a beep.
Driver’s responsibility
If you decide to keep the
doors locked when you are
driving, remember that it
may be more difficult for those as-
sisting you to gain access to the
passenger compartment in the
event of an emergency.
1.27
FRONT HEADRESTS
To raise the headrest
Raise the headrest to its highest po-
sition (tilt the seatback if necessary).
A Press button 1 and lift the headrest to
2 release it.
1.28
FRONT SEATS (1/2)
To store away the armrest
Lift the armrest to the storage posi-
tion A. Check that it is correctly locked.
Heated seats
A
With the ignition on, press switch 2.
5 The integrated indicator comes on.
3 The system, which has a thermostat,
1 2
4 decides whether or not the heating is
needed.
6
Seat adjustments To tilt the seatback
Move lever 6.
To move forwards or backwards
Lift handle 1 to release. Release the Front armrests 5 For safety reasons, carry
handle once the seat is in the correct Depending on the vehicle, the front out any adjustments when
position and ensure that the seat is armrests 5 can be adjusted. the vehicle is not being
locked. driven.
To adjust the armrest upwards We would advise you not to recline
To adjust the height of the seat base Lift armrest to the desired position. the seatbacks too far to ensure that
Lower or pull lever 3 as many times as the effectiveness of the seat belts is
is necessary to raise or lower the seat To adjust the armrest downwards
not reduced.
base. Lift the armrest to the storage position
along the seat back, then lower it. Nothing should be placed on the
Lumbar adjustment floor (area in front of driver) as such
Turn control knob 4 to increase or de- objects may slide under the pedal
crease support. during braking manoeuvres, thus
obstructing its use.
1.29
FRONT SEATS (2/2)
To reposition the central passenger
seat
Make sure that nothing prevents the
seat from moving.
– Activate control 8 to unlock the seat-
7 back;
– Lift the seat back;
– Make sure the seat is correctly
locked in position.
1.30
STEERING WHEEL/POWER-ASSISTED STEERING
Power Assisted Steering
Never drive with an inadequately
charged battery.
1.31
SEAT BELTS (1/5)
Always wear your seat belt when trav- Before starting, first adjust your driv-
elling in your vehicle. You must also ing position, then ask all occupants
comply with the legislation of the par- to adjust their seat belts to ensure
ticular country you are in. optimum protection.
1.32
SEAT BELTS (2/5)
Front seat belt reminder
ß warning light
6
It lights up on the central display when
the engine is started and, if the driv-
er’s seat belt is not fastened, the light
flashes and a beep sounds for about
2 minutes when the vehicle reaches a
1 speed of about 9.92 mph (16 km/h).
Depending on the vehicle, this flashes if
the front passenger seat belt is not fas-
3 tened.
4
5 5
1.33
SEAT BELTS (3/5)
8
7 13
9
11
10
12
Rear side seat belts Conditions of use Access to the last row
– For the first row of rear seats, it is Before using the rear side seat belts, To facilitate access to the last row of
mandatory to use seat belts 8; make sure that for each one, the seats, detach the second row seat belt
fixed buckle 11 is fully clicked into its by unlocking it from its catch 13. Insert
– for the last row of rear seats, it is catch 12. the detached part of the seat belt into
mandatory to use seat belts 7. the small bar on the fixed part of the
The belts are then locked and unlocked
When the seat belt 8 is not in use, place in the same way as the front seats. belt.
the buckle 9 in its housing 10. Remember to lock the seat belt in place
once more when a passenger is occu-
pying the seat.
Check that the rear seat belts are positioned and operating correctly each
time the rear bench seat is moved.
1.34
SEAT BELTS (4/5)
14
1.35
SEAT BELTS (5/5)
The following information applies to the vehicle’s front and rear seat belts.
– No modification may be made to the component parts of the originally fitted restraint system: seat belts, seats and
their mountings. For special operations (e.g. fitting child seats), contact an authorised dealer.
– Do not use devices which allow any slack in the belts (e.g. clothes pegs, clips, etc.): a seat belt which is worn too
loosely may cause injury in the event of an accident.
– Never wear the shoulder strap under your arm or behind your back.
– Never use the same belt for more than one person and never hold a baby or child on your lap with your seat belt around
them.
– The belt should never be twisted.
– Following an accident, have the seat belts checked and replaced if necessary. Always replace your seat belts as soon as
they show any signs of wear.
– When the rear bench seat is being put back, make sure that the seat belts and buckles are correctly positioned so that they
can be used properly.
– Make sure that the buckle is inserted into the appropriate catch.
– Ensure that no objects are placed in the area around the seat belt catch as they could prevent it from being properly se-
cured.
– Make sure the seat belt catch is properly positioned (it should not be hidden away, crushed or flattened by people or ob-
jects).
1.36
METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (1/4)
Depending on the vehicle, they may
comprise: – Have the entire restraint
system checked following
– front seat belt inertia reel preten- an accident.
sioners;
– No operation whatso-
– chest-level load limiters; ever is permitted on any part of
– air bags for driver and front pas- the system (pretensioners, air
senger. bags, computers, wiring) and the
system components must not
These systems are designed to act in- be reused on any other vehicle,
dependently or together when the vehi- even if identical.
cle is subjected to a frontal impact.
– To avoid incorrect triggering of
Depending on the severity of the the system which may cause
impact, the system can trigger: injury, only qualified personnel
1
– seat belt locking; from an approved Dealer may
work on the pretensioner and air
– the seat belt inertia reel pretensioner Pretensioners bag system.
(which engages to correct seat belt
slack); The pretensioners hold the seat belt – The electric trigger system may
against the body, holding the occupant only be tested by a specially
– the front airbag. more securely against the seat, thus in- trained technician using special
creasing the seat belt’s efficiency. equipment.
With the ignition on, following a signif- – When the vehicle is scrapped,
icant frontal impact and depending on contact an approved Dealer for
the severity of the impact, the system disposal of the pretensioner and
may trigger the seat belt inertia reel air bag gas generators.
pretensioner 1, which instantly retracts
the seat belt.
1.37
METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (2/4)
Load limiter Each air bag system consists of:
– an air bag and gas generator fitted
Above a certain severity of impact, this on the steering wheel for the driver
mechanism is used to limit the force of and in the dashboard for the front
the belt against the body so that it is at passenger;
an acceptable level. – an electronic unit for system monito-
ring which controls the gas generator A
Airbags driver and passenger electrical trigger system;
front
Fitted to the driver and passenger
– a single å warning light on the
instrument panel.
sides.
An “Airbag” marking on the steer-
ing wheel and the dashboard (airbag
area A) indicates that this device is
fitted.
1.38
METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (3/4)
1.39
METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (4/4)
All of the warnings below are given so that the air bag is not obstructed in any way when it is inflated and also to prevent
the risk of serious injuries caused by items which may be dislodged when the air bag inflates.
1.40
METHODS OF RESTRAINT IN ADDITION TO REAR SEAT BELTS
Force limiter – Have the entire restraint
Above a certain level of impact force, system checked following
this mechanism is used to limit the force an accident.
of the belt against the body so that it is
– No operation whatso-
at an acceptable level.
ever is permitted on any part of
the system (pretensioners, air
bags, computers, wiring) and the
system components must not
be reused on any other vehicle,
even if identical.
– To avoid incorrect triggering of
the system which may cause
injury, only qualified personnel
from an approved dealer may
work on the pretensioner and air
bag system.
– The electric trigger system may
only be tested by a specially
trained technician using special
equipment.
– When the vehicle is scrapped,
contact an approved dealer for
disposal of the pretensioner and
air bag gas generators.
1.41
SIDE PROTECTION DEVICES
Side Airbags
These airbags may be fitted to individ-
ual seats and are deployed at the sides
of the seats (door side) to protect the
occupants in the event of a severe side
impact.
Curtain Airbags
These are airbags fitted to each upper
side of the vehicle. They deploy along
the front door side windows to protect
occupants in the event of a severe side
impact.
1.42
ADDITIONAL METHODS OF RESTRAINT
All of the warnings below are given so that the airbag is not obstructed in any way when it is inflated and also to prevent
the risk of serious injuries caused by items which may be dislodged when it inflates.
The airbag is designed to complement the action of the seat belt. Both the air bags and seat belts are integral parts of
the same protection system. It is therefore essential to wear seat belts at all times. If seat belts are not worn, the oc-
cupants are exposed to the risk of serious injury in the event of an accident. It may also increase the risk of minor su-
perficial injuries occurring when the airbag is deployed, although such minor injuries are always possible with air bags.
If the vehicle should overturn or in the event of a rear impact, however severe, the pretensioners and airbags are not always
triggered. Impacts to the underside of the vehicle, e.g. from pavements, potholes or stones, can all trigger these systems.
– No work or modification whatsoever may be carried out on any part of the airbag system (airbags, pretensioners, computer,
wiring harness, etc.), except by qualified Network personnel.
– To ensure that the system is in good working order and to avoid accidental triggering of the system which may cause injury,
only qualified Network personnel may work on the airbag system.
– As a safety precaution, have the airbag system checked if your vehicle has been involved in an accident, or is stolen or
broken into.
– When selling or lending the vehicle, inform the user of these points and hand over this handbook with the vehicle.
– When scrapping your vehicle, contact your approved Dealer for disposal of the gas generator(s).
1.43
CHILD SAFETY: General information (1/2)
Carrying children
Children, and adults, must be correctly
seated and strapped in for all journeys.
The children being carried in your vehi-
cle are your responsibility.
A child is not a miniature adult. Children
are at risk of specific injuries as their
muscles and bones have not yet fin- Driver’s responsibility
ished growing. The seat belt alone when parking or stopping
would not provide suitable protection. the vehicle
Use an approved child seat and ensure
Never leave an animal,
you use it correctly.
child or adult who is not self-suffi-
cient alone on your vehicle, even for
a short time.
They may pose a risk to themselves
or to others by starting the engine,
A collision at 30 mph activating equipment such as the
(50 km/h) is the same as fall- electric windows or by locking the
ing a distance of 10 metres. doors.
Transporting a child without Also, in hot and/or sunny weather,
a restraint is the equivalent of allow- please remember that the tempera-
ing him or her to play on a fourth- ture inside the passenger compart-
floor balcony without railings. ment increases very quickly.
Never travel with a child held in your
arms. In the event of an accident, RISK OF DEATH OR SERIOUS
you will not be able to keep hold of INJURY.
To prevent the doors being the child, even if you yourself are
opened, use the “Child wearing a seat belt.
safety” device (refer to the If your vehicle has been involved in
information on “Opening a road accident, replace the child
and closing the doors” in Section 1). seat and have the seat belts and
ISOFIX anchorage points checked.
1.44
CHILD SAFETY: General information (2/2)
Using a child seat
The level of protection offered by the Set a good example by always fas-
child seat depends on its ability to re- tening your seat belt and teaching
strain your child and on its installation. your child:
Incorrect installation compromises the – to strap themselves in correctly;
protection it offers the child in the event – to always get in and out of the car
of harsh braking or an impact. at the kerb, away from busy traf-
fic.
Before purchasing a child seat, check
that it complies with the regulations for Do not use a second-hand child
the country you are in and that it can seat or one without an instruction
be fitted in your vehicle. Consult an ap- manual.
proved dealer to find out which seats Check that there are no objects in
are recommended for your vehicle. the vicinity of the child seat which
Before fitting a child seat, read the could impede its operation.
manual and respect its instructions. If
you experience any difficulties during
installation, contact the manufacturer
of the equipment. Keep the instructions Never leave a child unat-
with the seat. tended in the vehicle.
Check that your child is
always strapped in and that
the belt or safety harness used is
correctly set and adjusted. Avoid
wearing bulky clothing which could
cause the belts to slacken.
Never let your child put their head or
arms out of the window.
Check that the child is in the correct
position for the entire journey, espe-
cially if asleep.
1.45
CHILD SAFETY: choosing a child seat
1.46
CHILD SAFETY: choosing a child, baby seat mounting (1/2)
There are two ways of attaching child Attachment using the ISOFIX
seats: via the seat belt or using the Do not use the child seat system
ISOFIX system. if it may unfasten the seat
belt restraining it: the base Authorised ISOFIX child seats are ap-
Attachment via the seat belt of the seat must not rest on proved in accordance with regulation
the buckle and/or catch of the seat ECE-R44 in one of the three following
The seat belt must be adjusted to belt. cases:
ensure that it is effective in the event of – ISOFIXuniversal 3-point forward-fac-
harsh braking or an impact. ing seat;
Ensure that the strap paths indicated – ISOFIXsemi-universal 2-point seat;
by the child seat manufacturer are re- – specific.
spected. For the latter two, check that your child
Always check that the seat belt is cor- seat can be installed by consulting the
Before using an ISOFIX list of compatible vehicles.
rectly fastened by pulling it up, then child seat that you pur-
pulling it out fully whilst pressing on the chased for another vehicle, Attach the child seat with the ISOFIX
child seat. check that its installation is locks, if these are provided. The ISOFIX
Check that the seat is correctly held by authorised. Consult the list of ve- system allows quick, easy, safe fitting.
moving it from side to side and back hicles which can be fitted with the The ISOFIX system consists of 2 rings
to front: the seat should remain firmly seat from the equipment manufac- and, in some cases, a third ring.
fixed. turer.
Check that the child seat has not been
installed at an angle and that it is not
resting against a window.
The seat belt must never be twisted or the tension relieved. Never pass the shoulder strap under the arm or behind
the back.
Check that the seat belt has not been damaged by sharp edges.
If the seat belt does not operate normally, it will not protect the child. Consult an approved dealer. Do not use this seat
until the seat belt has been repaired.
1.47
CHILD SAFETY: choosing a child, baby seat mounting (2/2)
– Place the headrest in the top position
or remove it;
– pass the belt 2 (supplied with the
seat) between the two rear headrest
1 rods;
2 – the hook 3 must be attached to the
ring 4 marked by the symbol to
the rear of the seat;
– pull the belt so that the child seat
3 comes into contact with the vehicle
seatback.
The two rings 1 are located between the Front-facing seat mounting ring for
seatback and the seat base of the seat rear side seats
and are identified by a marking Ü. The third ring is used to attach the Check that the seatback
upper strap on some child seats. of the forward-facing child
seat is in contact with the
No modifications may be back of the vehicle seat. In this
made to the component case, the child seat may not always
parts of the restraint system rest on the base of the vehicle seat.
(seat belts, ISOFIX and
seats and their mountings) originally
fitted.
The ISOFIX anchorage points have been exclusively designed for child seats with the ISOFIX system. Never fit a dif-
ferent type of child seat, seat belt or other objects to these anchorage points.
Check that nothing is obstructing the anchorage points.
If your vehicle has been involved in a road accident, have the ISOFIX anchorage points checked and replace your
child seat.
1.48
CHILD SAFETY: fitting a child seat, general information (1/2)
Some seats are not suitable for fitting In the front seat After installing the child seat, when this
child seats. The diagram on the follow- The laws concerning children travel- is possible, you can move the vehi-
ing page shows you how to attach a ling in the front passenger seat differ in cle seat forward if necessary (so as to
child seat. every country. Consult the legislation in leave enough space in the rear seats
The types of child seat indicated may force and follow the indications on the for passengers or other child seats). In
not be available. Before using a differ- diagram on the following page. the case of a rear-facing child seat, do
ent child seat, check with the manufac- not let it touch the dashboard or move it
Before fitting a child seat in this seat (if to the furthest forward position.
turer that it can be fitted. authorised):
Do not change other settings after in-
– lower the seat belt as far as possible; stalling the child seat.
– move the seat as far back as possi-
ble;
Ensure that the child seat
or the child’s feet do not – gently tilt the seatback away from
prevent the front seat from vertical (approximately 25°);
locking correctly. Refer to – on equipped vehicles, raise the seat
the information on the “Front seat” base as far as possible.
in Section 1.
Check that when installing the child In all situations, reinsert the headrest to
seat in the vehicle it is not at risk of its full extent so that it does not interfere
coming loose from its base. with the child seat (see the information
If you have to remove the headrest, on “Front headrests” in Section 1);
check that it is correctly stored so
that it does not come loose under RISK OF DEATH OR
harsh braking or impact. SERIOUS INJURY: Before
Always attach the child seat to the installing a child seat on the
vehicle even if it is not in use so that front passenger seat, check
it does not come loose under harsh that the airbag has been deacti-
braking or impact. vated (please refer to “Child safety:
front passenger airbag deactivation
and activation” in Section 1).
1.49
CHILD SAFETY: fitting a child seat, general information (2/2)
In the rear side seat Rear centre seat
A carrycot can be installed across the Check that the belt is suitable for secu-
vehicle and will take up at least two ring your child seat. Consult an appro-
seats. ved dealer.
Position the child with their feet nearest
the door.
Move the front seat as far forward as
possible to install a rear-facing child
seat, then move back the seat in front
as far as it will go, although without al-
lowing it to come into contact with the
child seat.
For the safety of the child in the for-
ward-facing position:
– do not push the seat in front of the
child back further than halfway along
its runners;
– do not recline the seatback too far
(maximum of 25°) and raise the seat
as much as possible. A child seat with a floor sup-
In all situations, remove the rear head- port must never be installed
rests (refer to the information on the on the rear centre seat.
“Rear headrests” in Section 3). This RISK OF DEATH OR
must be done before fitting the child SERIOUS INJURY.
seat.
Check that the forward-facing child seat
is resting against the back of the vehi-
cle seat.
1.50
CHILD SEATS: attachment by seat belt (1/14)
2-seater van Check the status of the air bag
³ before fitting a child seat or al-
lowing a passenger to use the seat.
Seat not suitable for fitting
² child seats.
3-seater van
RISK OF DEATH OR
SERIOUS INJURY: before
fitting a rear-facing child
seat on the front passen-
ger seat, check that the air bag has
been deactivated (refer to the infor-
mation on “Deactivating the front
passenger air bag” in Section 1).
1.51
CHILD SEATS: attachment by seat belt (2/14)
The table below summarises the information already shown on the diagram on the previous page, to ensure the applica-
ble regulations are respected.
(2) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat on the front passenger seat, check
that the airbag has been deactivated (please refer to the information on “Child safety: front passenger airbag deactiva-
tion/activation” in Section 1).
1.52
CHILD SEATS: attachment by seat belt (3/14)
5-seater Combi Check the status of the air bag
³ before fitting a child seat or al-
lowing a passenger to use the seat.
Child seat attached using the belt
Seat which allows a seat with
¬ “Universal” approval to be
fitted using a seat belt;
Seat not suitable for fitting
² child seats.
RISK OF DEATH OR
SERIOUS INJURY: before
fitting a rear-facing child
seat on the front passenger Using a child safety system
seat, check that the airbag has been which is not approved for
deactivated (please refer to the in- this vehicle will not correctly
formation on “Child safety: front protect the baby or child.
passenger airbag deactivation, acti- They risk serious or even fatal injury.
vation” in Section 1).
1.53
CHILD SEATS: attachment by seat belt (4/14)
The table below summarises the information already shown on the diagram on the previous page, to ensure the applica-
ble regulations are respected.
Rear-facing seat
< 13 kg and 9 to 18 kg U U (4) U (4)
Groups 0+ and 1
Forward-facing seat
9 to 18 kg X U (5) U (5)
Group 1
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat on the front passenger seat, check
that the airbag has been deactivated (please refer to the information on “Child safety: front passenger airbag deactiva-
tion/activation” in Section 1).
1.54
CHILD SEATS: attachment by seat belt (5/14)
X = Seat not suitable for fitting child seats of this type.
U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.
(2) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).
(3) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest
the door.
(4) Move the front seat as far forward as possible to install a rear-facing child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child seat.
(5) Forward-facing child seat; position the seatback of the child seat in contact with the seatback of the vehicle seat. In all situa-
tions, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the child seat
(please refer to the section entitled “Rear headrests” in Section 3). Do not push the seat in front of the child more than halfway
back on its runners and do not recline the seatback more than 25°.
1.55
CHILD SEATS: attachment by seat belt (6/14)
The table below summarises the information already shown in the diagram on the following pages, to ensure the appli-
cable regulations are respected.
Rear-facing seat
< 13 kg and 9 to 18 kg X U U (3) U (3)
Groups 0+ and 1
Forward-facing seat
9 to 18 kg X X U (4) U (4)
Group 1
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat on the front passenger seat, check
that the airbag has been deactivated (please refer to the information on “Child safety: front passenger airbag deactiva-
tion/activation” in Section 1).
1.56
CHILD SEATS: attachment by seat belt (7/14)
X = Seat not suitable for fitting child seats of this type.
U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.
(2) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest
the door.
(3) Move the front seat as far forward as possible to install a rear-facing child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child seat.
(4) Forward-facing child seat; position the seatback of the child seat in contact with the seatback of the vehicle seat. In all situa-
tions, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the child seat
(please refer to the section entitled “Rear headrests” in Section 3). Do not push the seat in front of the child more than halfway
back on its runners and do not recline the seatback more than 25°.
1.57
CHILD SEATS: attachment by seat belt (8/14)
6-seater Combi Check the status of the air bag
³ before fitting a child seat or al-
lowing a passenger to use the seat.
Child seat attached using the belt
Seat which allows a seat with
¬ “Universal” approval to be
fitted using a seat belt;
Seat not suitable for fitting
² child seats.
RISK OF DEATH OR
SERIOUS INJURY: before
fitting a rear-facing child
seat on the front passenger Using a child safety system
seat, check that the airbag has been which is not approved for
deactivated (please refer to the in- this vehicle will not correctly
formation on “Child safety: front protect the baby or child.
passenger airbag deactivation, acti- They risk serious or even fatal injury.
vation” in Section 1).
1.58
CHILD SEATS: attachment by seat belt (9/14)
8-seater combi/bus Check the status of the air bag
³ before fitting a child seat or al-
lowing a passenger to use the seat.
Child seat attached using the belt
Seat which allows a seat with
¬ “Universal” approval to be
fitted using a seat belt;
Seat not suitable for fitting
² child seats.
RISK OF DEATH OR
SERIOUS INJURY: before
fitting a rear-facing child
seat on the front passenger Using a child safety system
seat, check that the airbag has been which is not approved for
deactivated (please refer to the in- this vehicle will not correctly
formation on “Child safety: front protect the baby or child.
passenger airbag deactivation, acti- They risk serious or even fatal injury.
vation” in Section 1).
1.59
CHILD SEATS: attachment by seat belt (10/14)
The table below summarises the information already shown on the diagram on the previous page, to ensure the applica-
ble regulations are respected.
Front
Weight of
Type of child seat passenger 2nd row 2nd row 3rd row 3rd row
the child
seat (1) (2) side seats centre seat side seats centre seat
Forward-facing seat
9 to 18 kg X U (5) U (5) U (5) U (5)
Group 1
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat on the front passenger seat, check
that the airbag has been deactivated (please refer to the information on “Child safety: front passenger airbag deactiva-
tion/activation” in Section 1).
1.60
CHILD SEATS: attachment by seat belt (11/14)
X = Seat not suitable for fitting child seats of this type.
U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.
(2) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).
(3) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest
the door.
(4) Move the front seat as far forward as possible to install a rear-facing child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child seat.
(5) Forward-facing child seat; position the seatback of the child seat in contact with the seatback of the vehicle seat. In all situa-
tions, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the child seat
(please refer to the section entitled “Rear headrests” in Section 3). Do not push the seat in front of the child more than halfway
back on its runners and do not recline the seatback more than 25°.
1.61
CHILD SEATS: attachment by seat belt (12/14)
The table below summarises the information already shown in the diagram on the following pages, to ensure the appli-
cable regulations are respected.
Forward-facing seat
9 to 18 kg X X U (4) U (4) U (4) U (4)
Group 1
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat on the front passenger seat, check
that the airbag has been deactivated (please refer to the information on “Child safety: front passenger airbag deactiva-
tion/activation” in Section 1).
1.62
CHILD SEATS: attachment by seat belt (13/14)
X = Seat not suitable for fitting child seats of this type.
U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.
(2) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest
the door.
(3) Move the front seat as far forward as possible to install a rear-facing child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child seat.
(4) Forward-facing child seat; position the seatback of the child seat in contact with the seatback of the vehicle seat. In all situa-
tions, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the child seat
(please refer to the section entitled “Rear headrests” in Section 3). Do not push the seat in front of the child more than halfway
back on its runners and do not recline the seatback more than 25°.
1.63
CHILD SEATS: attachment by seat belt (14/14)
9-seater combi/bus Check the status of the air bag
³ before fitting a child seat or al-
lowing a passenger to use the seat.
Child seat attached using the belt
Seat which allows a seat with
¬ “Universal” approval to be
fitted using a seat belt;
Seat not suitable for fitting
² child seats.
RISK OF DEATH OR
SERIOUS INJURY: before Using a child safety system
fitting a rear-facing child which is not approved for
seat on the front passen- this vehicle will not correctly
ger seat, check that the air bag has protect the baby or child.
been deactivated (refer to the infor- They risk serious or even fatal injury.
mation on “Deactivating the front
passenger air bag” in Section 1).
1.64
CHILD SEATS: attachment using the ISOFIX system (1/12)
5-seater Combi Child seat attached using the ISOFIX
mounting
1.65
CHILD SEATS: attachment using the ISOFIX system (2/12)
The table below summarises the information already shown on the diagram on the previous page, to ensure the applica-
ble regulations are respected.
Rear-facing seat
< 13 kg and 9 to 18 kg C, D X IL (2) X
Groups 0+ and 1
Forward-facing seat
9 to 18 kg A, B, B1 X IUF- IL (3) X
Group 1
1.66
CHILD SEATS: attachment using the ISOFIX system (3/12)
X = Seat not suitable for fitting child seats ISOFIX.
IUF/IL = On equipped vehicles, seat which allows an approved “Universal”/“semi-universal” or “vehicle specific” child seat to be
attached using the ISOFIX system; check that it can be fitted.
(1) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest
the door.
(2) Move the front seat as far forward as possible to install a rear-facing child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child seat.
(3) Forward-facing child seat; position the seatback of the child seat in contact with the seatback of the vehicle seat. In all situa-
tions, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the child seat
(please refer to the section entitled “Rear headrests” in Section 3). Do not push the seat in front of the child more than halfway
back on its runners and do not recline the seatback more than 25°.
1.67
CHILD SEATS: attachment using the ISOFIX system (4/12)
The table below summarises the information already shown in the diagram on the following pages, to ensure the appli-
cable regulations are respected.
Forward-facing seat
9 to 18 kg A, B, B1 X X IUF- IL (3) X
Group 1
1.68
CHILD SEATS: attachment using the ISOFIX system (5/12)
X = Seat not suitable for fitting child seats ISOFIX.
IUF/IL = On equipped vehicles, seat which allows an approved “Universal”/“semi-universal” or “vehicle specific” child seat to be
attached using the ISOFIX system; check that it can be fitted.
(1) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest
the door.
(2) Move the front seat as far forward as possible to install a rear-facing child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child seat.
(3) Forward-facing child seat; position the seatback of the child seat in contact with the seatback of the vehicle seat. In all situa-
tions, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the child seat
(please refer to the section entitled “Rear headrests” in Section 3). Do not push the seat in front of the child more than halfway
back on its runners and do not recline the seatback more than 25°.
1.69
CHILD SEATS: attachment using the ISOFIX system (6/12)
6-seater Combi Child seat attached using the ISOFIX
mounting
1.70
CHILD SEATS: attachment using the ISOFIX system (7/12)
8-seater combi/bus Child seat attached using the ISOFIX
mounting
1.71
CHILD SEATS: attachment using the ISOFIX system (8/12)
The table below summarises the information already shown on the diagram on the previous page, to ensure the applica-
ble regulations are respected.
Size of Front
Weight of
Type of child seat ISOFIX passenger 2nd row 2nd row 3rd row 3rd row
the child
seat seat side seats centre seat side seats centre seat
Carrycot fitted F
across the vehi-
< 10 kg X IL (1) X X X
cle
Group 0 G
Rear-facing shell
seat < 13 kg E X IL (2) X X X
Groups 0 and 0+
Forward-facing
seat 9 to 18 kg A, B, B1 X IUF- IL (3) X X X
Group 1
1.72
CHILD SEATS: attachment using the ISOFIX system (9/12)
X = Seat not suitable for fitting child seats ISOFIX.
IUF/IL = On equipped vehicles, seat which allows an approved “Universal”/“semi-universal” or “vehicle specific” child seat to be
attached using the ISOFIX system; check that it can be fitted.
(1) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest
the door.
(2) Move the front seat as far forward as possible to install a rear-facing child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child seat.
(3) Forward-facing child seat; position the seatback of the child seat in contact with the seatback of the vehicle seat. In all situa-
tions, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the child seat
(please refer to the section entitled “Rear headrests” in Section 3). Do not push the seat in front of the child more than halfway
back on its runners and do not recline the seatback more than 25°.
1.73
CHILD SEATS: attachment using the ISOFIX system (10/12)
The table below summarises the information already shown on the diagram on the following pages, to ensure the ap-
plicable regulations are respected.
Carrycot fitted F
across the vehi-
< 10 kg X X X X X X
cle
G
Group 0
Rear-facing
shell seat < 13 kg E X X IL (2) X X X
Groups 0 and 0+
< 13 kg C
Rear-facing seat
and 9 to 18 X X X X X X
Groups 0+ and 1
kg D
Forward-facing
seat 9 to 18 kg A, B, B1 X X IUF- IL (3) X X X
Group 1
15 to 25 kg
Booster seat
and 22 to X X IUF- IL (3) X X X
Groups 2 and 3
36 kg
1.74
CHILD SEATS: attachment using the ISOFIX system (11/12)
X = Seat not suitable for fitting child seats ISOFIX.
IUF/IL = On equipped vehicles, seat which allows an approved “Universal”/“semi-universal” or “vehicle specific” child seat to be
attached using the ISOFIX system; check that it can be fitted.
(1) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest
the door.
(2) Move the front seat as far forward as possible to install a rear-facing child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child seat.
(3) Forward-facing child seat; position the seatback of the child seat in contact with the seatback of the vehicle seat. In all situa-
tions, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the child seat
(please refer to the section entitled “Rear headrests” in Section 3). Do not push the seat in front of the child more than halfway
back on its runners and do not recline the seatback more than 25°.
1.75
CHILD SEATS: attachment using the ISOFIX system (12/12)
9-seater combi/bus Child seat attached using the ISOFIX
mounting
1.76
CHILD SAFETY: deactivating, activating the front passenger air bag (1/3)
DANGER
Since operation of the front
passenger airbag is not
2 compatible with the po-
sition of a rear-facing child seat,
NEVER fit a rear-facing child re-
straint system in a seat protected
1 by an ACTIVATED front AIRBAG.
This can lead to the DEATH of the
CHILD or SERIOUS INJURY.
Deactivating the front To deactivate the airbag: stationary
passenger airbag vehicle, ignition off, push and turn
lock 1 to the OFF position.
Before installing a child seat on the
front passenger seat: With the ignition on, you must check
– check that the child seat can be in-
stalled on this seat;
that the warning light] on the dis-
play 2 is lit up and, depending on the The passenger airbag must
vehicle, that the message “airbag pas- only be deactivated or acti-
– it is essential to deactivate the
senger deactivated” is displayed. vated when the vehicle is
airbagfor a rear-facing child seat.
This light remains permanently lit to stationary.
let you know that you can fit a child If it is interfered with when the ve-
seat. hicle is being driven, indicator lights
å and © will come on.
Switch the ignition off then on again
to reset the airbag in accordance
with the lock position.
1.77
CHILD SAFETY: deactivating, activating the front passenger air bag (2/3)
A
3
1.78
CHILD SAFETY: deactivating, activating the front passenger air bag (3/3)
Operating faults
It is forbidden to fit a rear-facing child
seat to the front passenger seat if the
airbag activation/deactivation system is
faulty.
Allowing any other passenger to sit in
that seat is not recommended.
Contact your approved dealer as soon
2 as possible.
1.79
DRIVING POSITION: LEFT-HAND DRIVE (1/2)
1 2 3 4 5 6 7 8 9 10 11 9 12 13 2 1
33 32 31 30 29 28 27 26 25 24 23 18 17 16 15 14
22 21 20
19
1.80
DRIVING POSITION: LEFT-HAND DRIVE (2/2)
The equipment fitted, described below, DEPENDS ON THE VERSION AND COUNTRY.
1 Side air vent. 13 Location for passenger airbag or 27 Cruise control/speed limiter main
2 Location for ashtray or cup holder. storage compartment. control.
1.81
DRIVING POSITION: RIGHT-HAND DRIVE (1/2)
1 2 3 4 5 6 7 5 8 9 10 11 12 2 1
33 32 31 30 29 28 21 20 19 18 17 16 15 14 13
27 26 25 24 22
23
1.82
DRIVING POSITION: RIGHT-HAND DRIVE (2/2)
The equipment fitted, described below, DEPENDS ON THE VERSION AND COUNTRY.
1.83
WARNING LIGHTS (1/4)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
1
g Contact your approved Dealer as soon
as possible.
Rear fog light telltale
M Low fuel level warning light
This lights up when the ignition
Left-hand direction indicator
c tell-tale
is switched on and goes out after a few
seconds.
Right-hand direction indica- If it lights up when driving, fill up with
Instrument panel A: lights up when
b tor tell-tale fuel as soon as possible. There is only
approximately 30 miles (50 km) worth
the ignition is switched on. The bright- of fuel left.
ness can be adjusted by turning control
knob 1.
In some cases, the appearance of a
warning light is accompanied by a mes- If no lights or sounds are ap-
sage. parent, this indicates a fault
Warning light ® re- in the instrument panel. This
quires you to stop immedi- indicates that it is essential
ately, for your own safety, to stop immediately (as soon as traf-
The © warning light means as soon as traffic conditions
you should drive very carefully to fic conditions allow). Ensure that the
allow. Switch off the engine and do vehicle is correctly immobilised and
an approved dealer as soon as pos- not restart it. Contact an approved
sible. If you fail to follow this recom- contact an approved Dealer.
Dealer.
mendation, you risk damaging your
vehicle.
1.84
WARNING LIGHTS (2/4)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
1.85
WARNING LIGHTS (3/4)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
1.86
WARNING LIGHTS (4/4)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
1.87
DISPLAYS AND INDICATORS (1/2)
3
2
1
5
4
Rev counter 1 Speedometer 2 Low engine oil level warning
(graduations x 1000) (km or miles per hour) When the engine is started, display 3
alerts the driver when the oil level is at
Overspeed buzzer its minimum. Refer to the information
on the “Engine oil level” in Section 4.
Depending on the vehicle, a buzzer
sounds for approximately 10 seconds
every 40 seconds, as long as the vehi- Fuel gauge 5
cle is travelling in excess of 72 mph
(120 km/h).
1.88
DISPLAYS AND INDICATORS (2/2)
6 9
7
8
10
1.89
ON-BOARD COMPUTER: general information (1/2)
f) distance travelled;
1
g) average speed;
h) mileage before service, oil change
counter;
2
i) reset the tyre pressure;
j) cruise control/speed limiter pro-
grammed speed;
k) clock and temperature;
l) trip log, operating faults and informa-
tion message readout;
3 m) percentage volume of remaining rea-
gent.
1.90
ON-BOARD COMPUTER: general information (2/2)
Interpreting some of the Automatic resetting of the
values displayed after journey parameters
resetting Resetting occurs automatically when
The values showing average fuel con- the maximum value of any of the pa-
2 sumption, range and average speed rameters is exceeded.
will become more stable and reliable
the further you travel after pressing the
reset button.
For the first few miles after pressing
the reset key you will notice that the
range increases as you travel. This
range takes into account the average
3 fuel consumption since the last time the
reset button was pressed. Therefore,
the average fuel consumption may de-
Resetting the trip mileage crease when:
With “trip mileage recorder” selected on – the vehicle stops accelerating;
the display, press button 2 or 3 until the
mileage recorder resets to zero. – the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed);
Resetting the journey – when driving from an urban area
parameters (reset button) onto the open road.
With one of the trip parameters selected
as the display, press and hold button 2
or 3 until the display resets.
1.91
ON-BOARD COMPUTER: trip settings (1/4)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
101778 km
112.4 km a) Total mileage and trip mileage recorder.
FUEL USED
b) Journey parameters.
8L Fuel used.
Fuel consumed since the last reset.
AVERAGE
c) Average fuel consumption since the last reset.
5.8 L/100 The value is displayed after having travelled at least 400 metres since the last
reset.
CURRENT
7.4 L/100 d) Current fuel consumption.
This value is displayed after a speed of approximately 20 mph (30 km/h) is reached.
1.92
ON-BOARD COMPUTER: trip settings (2/4)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
RANGE
541 km e) Estimated range with remaining fuel.
The value is displayed after driving 400 metres.
DISTANCE
522 km f) Distance travelled since last reset.
AVERAGE
89.4 km/h g) Average speed since the last reset.
The value is displayed after driving 400 metres.
1.93
ON-BOARD COMPUTER: trip settings (3/4)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
On-board computer with distance before Interpreting the display selected
next service message (cntd.)
h) Mileage before service
With the ignition switched on and the engine not running,
SERVICE OIL CHANGE IN when the message “SERVICE INTERVALS” is displayed, press
INTERVALS 30 000 km / 24 MO button 2 or 3 for around 5 seconds to display the mileage before
the next service (distance or time remaining before the next oil
change). When the distance value approaches its limit, there are
several possible scenarios:
SERVICE DUE IN – distance/time remaining less than 900 miles (1,500 km) or
one month: the message “Service due in” is displayed ac-
300 km / 24 DAYS
companied by the nearest term (distance or time);
– range equal to 0 km/miles or service date reached: the
message “SERVICE REQUIRED” is displayed accompanied
by warning light ©.
SERVICE REQUIRED The vehicle requires an oil change as soon as possible.
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed,
door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can
therefore decrease more quickly in some cases than the actual distance travelled.
Resetting: to reset the mileage before the next oil change, display the remaining range (distance and time), then press and hold
button 2 or 3 for approximately 10 seconds until the display shows the mileage before oil change without flashing.
1.94
ON-BOARD COMPUTER: trip settings (4/4)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
SPEED LIMITER
90 km/h
j) Cruise control/speed limiter programmed speed.
Refer to the information on the “Speed limiter” and “Cruise control” in Section 2.
CRUISE CONTROL
90 km/h
l) Trip log.
NO MESSAGE Successive display:
MEMORISED – information messages (passenger airbag OFF etc.);
– operating fault messages (check the injection system, etc.).
1.95
TRIP COMPUTER AND WARNING SYSTEM: information messages
These can help in the vehicle starting phase, or give information about a selection or a driving status.
Examples of information messages are given in the following pages.
« PARKING BRAKE ON » Indicates that the parking brake has been applied.
« BATTERY LOW Indicates that the vehicle must be started to recharge the battery (e.g. after the engine has been
START ENGINE » switched off for some time whilst listening to the radio).
« TOP UP OIL LEVEL » Indicates that the oil level needs adjusting.
« AUTO DOOR
Indicates that the automatic door locking while driving is deactivated.
LOCK OFF »
« STEERING WHEEL
Indicates that the steering column has not been locked.
NOT LOCKED »
1.96
TRIP COMPUTER AND WARNING SYSTEM: operating fault messages
These appear with the © warning light and mean that you should drive very carefully to an authorised dealer as
soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle.
They disappear when the display selection key is pressed or after several seconds and are stored in the computer log. The
© warning light stays on. Examples of operating fault messages are given in the following pages.
« CLEAN DIESEL FILTER » Indicates the presence of water in the diesel filter; contact an approved Dealer
as soon as possible.
“CHECK VEHICLE” Indicates a fault in one of the pedal sensors, battery management system or oil
level sensor.
“CHECK AIRBAG” Indicates a fault in the restraint system in addition to the seat belts. In the event
of an accident, it is possible that they may not be triggered.
“Check antipollution system” – Indicates a fault in the vehicle’s emission control system.
– Indicates a fault in the emissions reduction system when it is accompanied
by the
Section 1.
warning light. Refer to the information on “Reagent tank” in
1.97
TRIP COMPUTER AND WARNING SYSTEM: warning message
These appear with the ® warning light and require you to stop immediately, for your own safety, as soon as traffic
conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.
Examples of warning messages are given in the following pages. Note: the messages appear on the display either individually
or alternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a beep.
« GEAR BOX RISK OF BREAKAGE » Indicates an injection fault, the vehicle’s engine has overheated or there is a
serious engine fault.
« BATTERY CHARGING FAULT » Indicates a fault in the vehicle battery charging circuit (alternator etc.).
1.98
CLOCK AND EXTERIOR TEMPERATURE (1/2)
A
2
9°C 12:00
1.99
CLOCK AND EXTERIOR TEMPERATURE (2/2)
External temperature
indicator
Special note:
B When the exterior temperature is - 3°C
to + 3°C, the °C characters flash (sig-
nalling a risk of ice on the road).
If the power supply is cut (battery disconnected, supply wire cut, etc.), the clock
must be reset.
We recommend that you do not adjust these settings while driving.
1.100
REAR-VIEW MIRRORS (1/2)
Heated door mirrors
Depending on the vehicle, with the
engine running, the mirrors are heated
in conjunction with the rear windows.
A
Manual door mirrors
To adjust, press the mirror A.
1 B
C
Electrically-adjustable door
mirrors
With the ignition on, position control 1
on:
B to adjust the left-hand door mirror,
D to adjust the right-hand door mirror,
C to deactivate it.
1.101
REAR-VIEW MIRRORS (2/2)
3
4
1.102
EXTERIOR LIGHTING AND SIGNALS (1/4)
1 2 3
1.103
EXTERIOR LIGHTING AND SIGNALS (2/4)
Switching off the dipped beam
headlights
1 2 – Manually, move ring 2 to position 0;
– automatically, with ring 2 in position
AUTO, the dipped beam headlights
go out upon stopping the engine, the
driver’s door is opened or the vehi-
cle is locked. In this case, the next
time the engine is started, the dipped
beam headlights will be switched
back on, taking into account the ex-
terior light level, without moving the
stalk 1.
NB: If the main beam headlights or
the fog lights are on, the lights are not
Dipped beam switched off automatically.
k headlights
Manual operation
Turn the ring 2 until the symbol is oppo-
site mark 3. This indicator light on the
instrument panel comes on.
If the vehicle is parked
Automatic operation on the hard shoulder with
(depending on vehicle) the tailgate open, the rear
Turn ring 2 until the AUTO symbol is op- lights may be obscured.
posite mark 3: with the engine running, You should make other road users
the dipped beam headlights switch on aware of your vehicle by using a
or off automatically depending on the warning triangle or other equipment
brightness of the light outside, without specified by the road traffic regula-
any action on stalk 1. tions of the country you are driving
in.
1.104
EXTERIOR LIGHTING AND SIGNALS (3/4)
With the engine and lights switched Main beam headlights
off, and the ring 2 in position 0, pull the
stalk 1 towards you: the dipped beam
á With the engine running and
1 2 the dipped beam headlights lit, push
headlights come on for about thirty sec- stalk 1. This indicator light on the instru-
onds. To increase this duration, you ment panel comes on.
may pull the stalk up to four times (total To return to the dipped headlight posi-
time restricted to approximately two tion, pull the stalk 1 towards you again.
minutes). The message “ _ _ _” along
with the time the lights will be on for is Switching off the main beam
displayed on the instrument panel to headlights
confirm this action. Manually, move ring 2 to position 0.
To switch off the lights before they go
out automatically, turn ring 2 to any po-
sition, then return it to position 0. Lights-on reminder buzzer
A warning beep sounds when the driv-
er’s door is opened to warn you that the
“See-me-home lighting” lights are still on.
function
This function allows you to briefly switch
on the dipped beam headlights (to pro-
vide light when opening a gate, etc.).
1.105
EXTERIOR LIGHTING AND SIGNALS (4/4)
Cornering lights function Switching off the lights
Whenever the dipped beam headlights Turn ring 4 again until mark 5 is oppo-
4 5 are on and under certain conditions (at site the symbol for the fog light you wish
1 speed, the steering wheel at an angle, to switch off. The corresponding indi-
in forward gear, the indicator lights on, cator light goes out on the instrument
etc.), when taking a corner one of the panel.
front fog lights will come on to light the The front and rear fog lights switch off
inside of the bend. when the exterior lights are switched
off.
Rear fog light
Turn centre ring 4 on the stalk
until the symbol faces mark 5, then re-
lease it.
Operation of the fog lights depends on
Front fog lights the exterior lighting selected, and an in- When driving in fog or snow, or
g Turn centre ring 4 on the dicator light will light up on the instru- when transporting objects which are
stalk 1 until the symbol faces mark 5, ment panel. higher than the roof, the headlights
then release it. To avoid inconveniencing other road do not come on automatically.
Operation of the fog lights depends on users, remember to switch off the rear Switching on the fog lights remains
the exterior lighting position selected, fog light when it is no longer needed. the responsibility of the driver: the
and an indicator light will light up on the indicator lights on the instrument
instrument panel. panel inform you whether the fog
lights are lit (indicator light on) or not
(indicator light not on).
If the vehicle is parked on the hard shoulder with the tailgate open, the
rear lights may be obscured. You should make other road users aware of
your vehicle by using a warning triangle or other equipment specified by
the road traffic regulations of the country you are driving in.
1.106
HEADLIGHT BEAM ADJUSTMENT (1/2)
The table below gives some examples. In all cases, adjust control A according to
the vehicle load so that the road can be seen and other drivers are not dazzled.
Temporary adjustment
Open the bonnet and identify the mark-
ing B next to one of the front headlight
projectors.
For each headlight, using a screw-
driver, turn the screw 1 by a quarter
turn towards the - symbol to lower the
beams.
Return to the starting point once your
trip is over: turn the screw 1 by a quar-
ter turn towards the + symbol to raise
the beams.
1.108
AUDIBLE AND VISUAL SIGNALS
Direction indicators
Move stalk 1 parallel to the steering
wheel and in the direction you are going
to turn it.
1
One-touch mode
When driving, it is possible that the
A steering wheel may not be turned suf-
ficiently to return the stalk automatically
to its starting position.
In this case, move the stick 1 to half-
way, then release it: the stalk returns to 2
its original point and the indicator light
flashes three times.
1.109
WINDSCREEN WASH, WIPE (1/2)
Vehicles with automatic wiper
function
2 With the engine running, move stalk 1
1 1 E
– A park.
– B automatic wiper function
A When this position is selected, the
B system detects water on the wind-
screen and triggers the wipers at a
C suitable wiping speed. It is possi-
D ble to change the triggering thresh-
old and the time sweeps by turning
F ring 2:
– E: minimum sensitivity
– F: maximum sensitivity
With the ignition on, move stalk 1 Special note NB: in foggy weather or during
When driving, the wiping speed slows snowfalls, the wiping is not automati-
– A park. cally triggered and remains under
down whenever the vehicle stops. For
– B intermittent wiping. example, fast wiping speed will slow to the driver’s control.
The wipers will pause for several normal wiping speed. As soon as the – C normal wiping speed.
seconds between sweeps. It is vehicle moves off, wiping will return to
possible to change the time be- – D fast wiping speed.
the speed originally selected. If stalk 1
tween sweeps by turning ring 2. is operated, it overrides and cancels
– C normal wiping speed. the automatic function.
– D fast wiping speed.
1.110
WINDSCREEN WASH, WIPE (2/2)
1 1
Efficiency of a wiper blade
Check the condition of the wiper
A blades. How long they last depends
B on you:
C – it must remain clean: clean the
blade and the screen regularly
D with soapy water;
– do not use it when the screen is
dry;
– free it from the screen when it has
not been used for a long time.
Note: Windscreen washer Replace wiper blades as soon as
There is a maintenance position for re- With the ignition on, pull stalk 1 to- their performance starts to diminish:
placing wiper blades. wards you. Approximately every year (refer to
With the ignition on and the engine the information on “Wiper blades” in
off, lower windscreen wiper stalk 1 fully A brief pull will trigger a single sweep
of the wipers, in addition to the wind- section 5).
(position D). The wiper arms stop in a
position away from the bonnet (please screen washer.
refer to the information on “Windscreen A longer pull will trigger three sweeps Precautions for using the
wiper blades” in Section 5). of the wipers followed, a few seconds wipers
later, by a fourth, in addition to the wind- – In freezing or snowy weather,
screen washer. clear the screen before starting
the wipers (risk of motor over-
heating);
– ensure that no objects are ob-
Before any action involving the windscreen (washing the vehicle, de-ic- structing the travel of the blade.
ing, cleaning the windscreen, etc.) return stalk 1 to position A (park).
Risk of injury and/or damage.
1.111
REAR SCREEN WASH, WIPE
Rear screen wash/wipe
p With the ignition on, turn the
end of stalk 1 to align mark 2 with the
2 1 symbol.
Efficiency of a wiper blade
When the stalk is released, it returns to
the rear wipe position. Check the condition of the wiper
blades. How long they last depends
on you:
Special note
– it must remain clean: clean the
If the windscreen wipers are operat- blade and the screen regularly
ing or are in automatic mode, the rear with soapy water;
screen wiper wipes intermittently when – do not use it when the screen is
reverse gear is engaged. dry;
– free it from the screen when it has
not been used for a long time.
Speed-dependent
Y timed rear screen
Replace wiper blades as soon as
their performance starts to diminish:
wiper Approximately every year (refer to
With the ignition on, turn the end of the information on “Wiper blades” in
stalk 1 to align mark 2 with the symbol. section 5).
Do not use the wiper arm to open or
Wiping frequency varies with speed. close the tailgate.
Precautions for using the
wipers
– In freezing or snowy weather,
Before any action on the clear the screen before starting
When working in the engine windscreen (washing the the wipers (risk of motor over-
compartment, ensure that vehicle, de-icing, cleaning heating);
the windscreen wiper stalk the windscreen, etc.) return – ensure that no objects are ob-
is in the park position. stalk 1 to the park position. structing the travel of the blade.
Risk of injury. Risk of injury and/or damage.
1.112
FUEL TANK (1/3)
Fuel grade Diesel versions
Use a high-grade fuel that complies It is essential to use diesel fuel that
with the legislation in force in each conforms with the information given on
1 country. It must comply with the spec- the label inside cover A.
ifications given on the label on the
cover A. Refer to the information on
“Engine specifications” in Section 6.
A 2
1.113
FUEL TANK (2/3)
Filling with fuel
With the ignition off, insert the nozzle
and insert it fully before turning it on to Vehicle fitted with the Stop and
fill the fuel tank (risk of splashing). Start function
Keep the nozzle in this position through- To fill up with fuel, the engine must
out the entire filling operation. be stopped (and not on standby):
When the pump cuts out automatically stop the engine (Please See
at the end of the filling procedure, a “Starting, stopping the engine” in
maximum of two further filling attempts Section 2).
may be made, as there must be suffi-
cient space in the fuel tank to allow for
expansion.
Make sure that no water enters the fuel
tank during filling. The cover A and its
surround must remain clean.
Fuel types that conform to European Persistent fuel odour
standards with which the engines of
vehicles sold in Europe are compat- If you notice a persistent
ible: refer to the “Engine specifica- fuel odour you should:
tions” in section 6. – stop the vehicle as soon as traf-
fic conditions allow and switch off
the ignition;
– switch on the hazard warning
Do not mix even small lights and ask your passengers to
amounts of petrol (un- leave the vehicle and stay clear
leaded or E85) with diesel. of the traffic;
Do not use ethanol-based – contact an approved Dealer.
fuel if your vehicle is not compatible
with this fuel.
Do not add anything to the fuel (ad-
ditive, reagent, etc.) to prevent the
risk of damaging the engine.
1.114
FUEL TANK (3/3)
Running out of fuel on diesel
versions 3
Vehicles with key/remote control
– Put the ignition key in “On” posi-
tion M (please see the information
on the “Ignition switch” in Section
2) and wait for a few minutes before
starting, to enable the fuel circuit to
be primed; 4
– turn the key to position D. If the
engine does not start, repeat the pro-
cedure;
– if the engine does not start after sev-
eral attempts, please contact an au-
thorised dealer. Vehicles with RENAULT card
Insert the RENAULT card into the 3
card reader. Press the start button 4
without pressing any of the pedals. Wait
a few minutes before starting. This will
enable the fuel circuit to be primed. If
the engine does not start, repeat the No modifications what-
Please note when work- procedure. soever are permitted on
ing close to the engine that any part of the fuel supply
it may be hot. In addition, system (electronic units,
the engine cooling fan may wiring, fuel circuit, injectors, pro-
tective covers, etc.) as this may be
start at any moment. The
warning light in the engine compart-
dangerous (unless undertaken by
qualified Network personnel).
ment reminds you of this.
Risk of injury.
1.115
REAGENT TANK (1/4)
Please ensure that you comply with the
legislation of your country. It is impor-
tant to remember that failure to respect
regulations in force could lead to legal
action being taken against the vehicle Vehicle fitted with the Stop and
owner. 1 Start function
To fill up with reagent, the engine
must be stopped (and not on
Operating principle standby): stop the engine (please
The reagent is intended for diesel en- see “Starting, stopping the engine”
gines fitted with the SCR (selective cat- in Section 2).
alytic reduction) system. Using the re-
agent reduces the quantity of nitrogen
oxides in exhaust gases. A
If the “XXXX KM FAILURE
Reagent quality TOP UP ADBLUE” mes-
Use only reagents which conform Filling sage appears, fill the rea-
to standard ISO 22241 and in accor- Capacity of the fuel tank: 20 litres ap- gent tank and refer to the
dance with the mark on the tank filler proximately. filling instructions.
cap.
Ignition off, open the front left door to Risk of immobilisation of the ve-
open the cover A. Unscrew the cap 1. hicle.
Average fuel consumption
Approximately 0.77 gal/620 miles Note: Ammonium hydroxide vapour
(3.5 l/1000 km), depending on the ve- may escape from the cap opening
hicle. when the tank temperature is high.
Fuel filler cap: this is spe-
Consumption in real time depends on cific.
vehicle usage conditions, the equip- If you have to replace it,
ment fitted and the user’s driving style. make sure it is identical to
the original cap. Contact an appro-
ved Dealer. Do not wash the filler
area with a high pressure washer.
1.116
REAGENT TANK (2/4)
Precautions for use In extreme cold weather conditions
The tank can be filled at the pump. In In frosty weather conditions, the re-
other cases, it is essential to read the agent tank should be refilled when
information shown on the reagent con-
tainer (e.g. the can or bottle). the indicator and the message
“ADBLUE TO FILL” appear on the in-
When filling, handle the reagent care- strument panel. After filling the reagent tank, check
fully. They can damage clothes, that the cap and cover are closed,
shoes, bodywork components etc. Special cases
start the engine and WAIT 10 sec-
If the reagent overflows, or contami- The reagent fluid freezes below about onds with the vehicle stationary,
nates any paintwork, clean the affected -10°C. engine running before setting off
area quickly with plenty of cold water In these conditions, do not attempt fill- again.
and a soft cloth. ing when the fluid is frozen. In the event If this operation is not carried out,
Note: If the reagent crystallises, use a of needing to top up or fill the tank the filling of the tank will not be
taken into account automatically
soft sponge. with reagent ( on), park the ve-
hicle in a hotter location if possible so
until after several dozens of min-
utes of driving. The message “TOP
that the reagent becomes liquid again. UP ADBLUE” and/or the warning
Otherwise, have a qualified profes- lights will continue to appear until
sional top up or fill up with reagent fluid. the filling has been registered by the
system.
No work whatsoever is
The reagent must not come permitted on any part of
into contact with eyes or the system. To prevent
skin. If it does, wash the af- damage, only qualified per-
fected area with plenty of sonnel from our network may work
cold water. If necessary, consult a on the system.
doctor.
1.117
REAGENT TANK (3/4)
Maintenance/Range
The information displayed on the instrument panel may be accompanied by a beep.
Indicator lights Messages Reading
on.
comes “ADBLUE TO FILL”
“xxxMILES (xxxKM) 0KM FAILURE TOP UP Fill or have an Approved Dealer fill the reagent tank as soon
on.
comes ADBLUE” as possible.
“0MILES (0KM) 0KM FAILURE TOP UP The engine will not start.
on.
comes ADBLUE”
To restart, you must fill the reagent tank yourself.
1.118
REAGENT TANK (4/4)
System fault
The integrated indicator lights described below are accompanied by a beep.
Indicator lights Messages Readings
“0MILES (0KM)0KM FAILURE TOP UP Indicates that after the ignition is switched off the ve-
and © come on. ADBLUE” hicle will not restart. Call an approved Dealer.
1.119
1.120
Section 2: Driving
(Advice on use relating to fuel economy and the environment)
Running in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
Ignition switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
Starting, stopping the engine using the key/remote control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3
Starting/stopping the engine: vehicle with RENAULT card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4
Stop and Start Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7
Special features of diesel versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.10
Gear lever/Handbrake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.11
Driving advice, Eco-driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.12
Maintenance and antipollution advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.16
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.17
Tyre pressure loss warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.18
Driver correction devices/aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.21
Speed limiter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.26
Cruise control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.29
Overspeed function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.33
Fast idle speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.34
Parking distance control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.35
Reversing camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.37
2.1
RUNNING IN/IGNITION SWITCH: vehicle with key
Diesel version Ignition position M.
For the first 1,000 miles (1,500 km), The ignition is switched on:
do not exceed 80 mph (130 km/h) in
the highest gear, or 2,500 rpm. After
completing this mileage you may drive Start position D
faster, although you may only expect If the engine fails to start at the first
top performance after approximately attempt, the key must be turned back
3,600 miles (6,000 km). before the starter can be activated
During the running in period, do not ac- again. Release the key as soon as the
celerate hard while the engine is still engine starts.
cold and do not let the engine over-rev. Note: on diesel versions, several sec-
Service intervals: refer to the onds may pass between turning the
Maintenance Document for your vehi- key and the engine starting to allow for
cle. engine preheating.
“Accessories” position A
When the ignition is switched off, any
accessories (radio, etc.) will continue to
function.
2.2
STARTING, STOPPING THE ENGINE: vehicle with key
Stopping the engine
With the engine idling, turn the key to
the “Stop” position St.
Driver’s responsibility
when parking or stopping
the vehicle
Never leave an animal,
child or adult who is not self-suffi-
cient alone in your vehicle, even for
a short time.
Starting the engine Never start your vehicle They may pose a risk to themselves
while freewheeling on a or to others by starting the engine,
Turn the ignition key to the “Ignition on” gradient. Risk of non-ac- activating equipment such as the
position M and hold this position until tivation of power-assisted electric windows or locking the
the engine preheating warning light steering. doors, for example.
É goes out. There is a risk of accidents. Also, in hot and/or sunny weather,
please remember that the tempera-
Turn the key to starter position D with-
out depressing the accelerator ture inside the passenger compart-
pedal. ment increases very quickly.
Never switch off the igni-
Release the key as soon as the engine tion before the vehicle has RISK OF DEATH OR SERIOUS
starts. stopped completely. Once INJURY.
the engine has stopped, the
brake servo, power-assisted steer-
ing, etc. and the passive safety de-
vices such as air bags and preten-
sioners will no longer operate.
2.3
STARTING, STOPPING THE ENGINE: vehicle with RENAULT CARD (1/3)
2
3
Driver’s responsibility
when parking or stopping
the vehicle
1 Never leave an animal,
child or adult who is not self-suffi-
cient alone in your vehicle, even for
a short time.
The RENAULT card must be inserted They may pose a risk to themselves
in card reader 2 or in detection zone 3. or to others by starting the engine,
activating equipment such as the
To start, depress the brake or clutch electric windows or locking the
pedal and press button 1. If a gear doors, for example.
is engaged, the vehicle may only be
started by depressing the clutch pedal. Also, in hot and/or sunny weather,
please remember that the tempera-
ture inside the passenger compart-
ment increases very quickly.
Never switch off the igni-
tion before the vehicle has RISK OF DEATH OR SERIOUS
stopped completely. Once INJURY.
Never start your vehicle the engine has stopped, the
while freewheeling on a brake servo, power-assisted steer-
gradient. Risk of non-ac- ing, etc. and the passive safety de-
tivation of power-assisted vices such as air bags and preten-
steering. sioners will no longer operate.
There is a risk of accidents.
2.4
STARTING, STOPPING THE ENGINE: vehicle with RENAULT CARD (2/3)
Special features Operating faults
– If one of starting conditions is not ap- In certain cases, the hands-free
plied, the message “PRESS BRAKE RENAULT card may not work:
+ START” or “PRESS CLUTCH + 2 – when the RENAULT card battery is
START” or “GEAR LEVER TO P” is drained, flat battery, etc.
displayed on the instrument panel; – near to appliances operating on the
– in some cases, it will be necessary same frequency as the card (moni-
to move the steering wheel whilst tor, mobile phone, video game, etc.);
pressing the start button 1 to help – vehicle located in a high electromag-
unlock the steering column; the mes- netic radiation zone.
sage “TURN STEERINGWHEEL +
START” will warn you of this; 1 The message “PLEASE INSERT
– in the event of starting the engine KEYCARD” appears on the instrument
in very low exterior temperatures panel.
(lower than -10°C): hold down the Insert the RENAULT card fully into card
clutch pedal until the engine starts. reader 2.
Accessories function
(switching on the ignition)
Once you have gained access to your
vehicle, you may use some of its func-
tions (radio, navigation, wipers, etc.).
To use the other functions, with the
card in the passenger compartment or
inserted in the card reader 2, press the
button 1 without pressing the pedals.
2.5
STARTING, STOPPING THE ENGINE: vehicle with RENAULT CARD (3/3)
Driver’s responsibility
when parking or stopping
1 the vehicle
Never leave an animal,
child or adult who is not self-suffi-
cient alone in your vehicle, even for
Conditions for stopping the With the engine switched off, any ac- a short time.
cessories being used (radio, etc.) will They may pose a risk to themselves
engine or to others by starting the engine,
continue to function for approximately
The vehicle must be at a standstill. 10 minutes. activating equipment such as the
With the 2 card in the card reader or electric windows or locking the
When the driver’s door is opened, the doors, for example.
in the detection zone 3, press button 1: accessories stop working.
the engine stops. The steering column Also, in hot and/or sunny weather,
is locked when the driver’s door is please remember that the tempera-
opened or the vehicle is locked. ture inside the passenger compart-
Never switch off the igni- ment increases very quickly.
If the card is no longer in the pas- tion before the vehicle has
senger compartment when you try to RISK OF DEATH OR SERIOUS
stopped completely. Once INJURY.
switch the engine off, the message “NO the engine has stopped, the
KEYCARD PRESS AND HOLD” ap- brake servo, power-assisted steer-
pears on the instrument panel: press ing, etc. and the passive safety de-
button 1 for longer than 2 seconds. vices such as air bags and preten-
sioners will no longer operate.
2.6
STOP AND START function (1/3)
This system enables a reduced fuel This can occur especially when:
consumption and lower greenhouse
gas emissions.
The warning light is displayed on
the instrument panel to notify you that
– the outdoor temperature is too low or
too high (less than around 0 °C or
The system is activated automatically the engine is on standby. higher than around 35 °C);
when the vehicle is started. – the “Clear View” function is activated
While driving, the system stops the The vehicle equipment remain opera- (please see the information on “Air
engine (standby) when the vehicle is tional while the engine is stopped. conditioning” in Section 3);
at a standstill (traffic jam, traffic lights, The engine will restart when you press – the battery is not sufficiently charged;
etc). the clutch pedal and move into gear. – the vehicle speed is above 3 mph
(5 km/h) (downhill slope etc.);
Special feature of the automatic – repeated pressing on the brake
System operating conditions engine re-start pedal or braking system require-
Engine standby is activated if: ment;
Under certain conditions, the engine
– the vehicle has been driven since its – the engine restart may be interrupted
can restart on its own in order to guar-
last stop; if the clutch pedal is released too
antee your safety and comfort.
quickly while a gear is engaged.
– the gearbox is in neutral;
– ...
– the clutch pedal is released;
and
– the vehicle speed is less than ap-
proximately 1.86 mph (3 km/h).
2.7
STOP AND START function (2/3)
Special features of vehicles with – the outdoor temperature is too low or Special cases
remote control too high (less than around 0 °C or
higher than around 35 °C); – For vehicles using a RENAULT card,
Some of these conditions prevent the while the system is operating and
engine from automatically restarting – the battery is not sufficiently charged; the engine is in standby (traffic jam,
upon opening: – the difference between the vehicle traffic lights, etc.), if the driver gets
– one of the doors for vehicles using a interior temperature and the auto- out of their seat or unfastens their
key; matic climate control instruction is seatbelt and opens the driver's door,
– the passenger side door for vehicles too high; the ignition will be switched off. To
using a RENAULT card. restart and reactivate the Stop and
– the “Clear View” function is activated Start system, press the start button
(please see the information on “Air (please refer to "Starting, stopping
Conditions preventing the conditioning” in Section 3); the engine" in Section 2).
standby of the engine – the engine coolant temperature is – In the event of the engine stalling,
Depending on the vehicle, certain con- too low; if the system is operational, press
ditions prevent the system from using down the clutch pedal as far as it will
– automatic particle filter cleaning is
the engine standby function, including go to restart.
underway;
when:
– the “Fast Idle Speed” function is acti-
– reverse gear is engaged;
vated (please refer to the information
– the bonnet is not locked; on “Fast Idle Speed” in section 2);
– for vehicles using a RENAULT card, – ...
the driver’s side door is not closed;
– for vehicles using a RENAULT card,
Warning light is displayed on the
instrument panel. This notifies you that
the driver’s seat belt is not buckled; engine standby is not available.
2.8
STOP AND START function (3/3)
The system is automatically reacti- Operating faults
vated each time the vehicle is started
(see “Starting, stopping the engine” in When the message “CHECK STOP
Section 2). AND START” appears on the instru-
ment panel and the integrated warn-
Special note: engine on standby, ing light 2 lights up on the switch 1, the
1 press switch 1 to automatically restart system is deactivated.
the engine.
Please consult an authorised dealer.
2.9
SPECIAL FEATURES OF DIESEL VERSIONS
Diesel engine speed Precautions to be taken in
Diesel engines are fitted with an injec- winter
A
tion pump which prevents the engine To avoid any faults in icy weather:
speed being exceeded irrespective of
the gear selected. – ensure that the battery is always fully
charged,
If the message “Check antipollution 1
system” is displayed along with warn- – always keep the diesel tank rela-
tively full to avoid water vapour con-
ing lightsÄ and ©, consult an
authorised dealer immediately.
densing in it and accumulating at the
bottom of the tank.
When driving, depending on the fuel
grade used, it is possible that white
smoke may be emitted.
This is due to the exhaust particle filter
being cleaned automatically, and does
Engine smoke opacity label
not affect the way the vehicle runs.
You will find 1 information on the A label
stuck inside the engine compartment.
Running out of fuel
1 Diesel exhaust emissions.
If the tank has been completely
drained, the system must be reprimed
after the tank is refilled: See “Fuel
tank” in section 1 before restarting the
engine.
Do not park the vehicle or
run the engine in locations
where combustible sub-
stances or materials such
as grass or leaves can come into
contact with the hot exhaust system.
2.10
GEAR LEVER/HANDBRAKE
Handbrake
1 To release
Pull the lever up slightly, press button 2
and then lower the lever to the floor.
The red warning light on the instrument When stationary and de-
panel will light up if you are driving with pending on the slope and/or
an incorrectly released handbrake. vehicle load, it may be nec-
essary to pull up the hand-
To apply brake at least two extra notches and
2 Pull the lever upwards and make sure engage a gear (1st or reverse gear)
the vehicle is immobilised. for vehicles with a manual gearbox
or position P for vehicles with an au-
tomatic transmission.
Gear lever
To select reverse gear
(vehicle stationary)
Move the lever to neutral, then position An impact to the underside
the lever in reverse. of the vehicle when revers-
Ring 1 has to be lifted up to the gear ing (e.g. striking a raised
lever knob to select reverse gear. kerb) may result in damage
to the vehicle (eg. deformation of
The reversing lights will come on as
the rear axle).
soon as reverse gear is selected (with
the ignition on). To avoid any risk of accident, have
Make sure that the hand- your vehicle checked by an ap-
Vehicles fitted with parking distance brake is properly released proved Dealer.
control: refer to the information on the when driving (red indicator
“Parking distance control” in Section 2 light off), otherwise over-
for details of the special features. heating may occur.
2.11
DRIVING ADVICE, ECO-DRIVING (1/4)
Fuel consumption is accredited in ac- Driving style indicator 2
cordance with a standard regulatory
method. Identical for all manufactu- Informs you about the driving style
rers, this enables vehicles to be com- adopted in real time. You will be notified
pared with one another. Consumption by the colour of warning light 2.
in real time depends on vehicle usage
1 – Green: measured, economical driv-
conditions, the equipment fitted and the ing;
user’s driving style. To optimise fuel – Yellow: opt for a calmer driving style;
consumption, please refer to the fol- – Orange: driving too fast.
lowing advice. 2 To activate/deactivate the driving style
Depending on the vehicle, you will have indicator, please see the multimedia
various functions which enable you to system instructions.
lower your fuel consumption:
– the rev counter;
– gear change indicator;
– the driving style indicator; Gear change indicator 1
– the journey record and eco-driving
advice via the multimedia display; Depending on the vehicle, to obtain op-
– ECO mode – activated by the ECO timum consumption levels, a warning
button. light on the instrument panel lets you
know the best time to move up or down
If fitted on the vehicle, the navigation a gear:
system provides additional information.
Š move up a gear;
2.12
DRIVING ADVICE, ECO-DRIVING (2/4)
ECO mode
3 ECO mode is a function which op-
timises fuel consumption. It acts on
certain power consuming systems in
the vehicle (heating, air conditioning,
power-assisted steering, etc.) and on
certain driving actions (acceleration,
gear changing, cruise control, deceler-
ation, etc.).
2.13
DRIVING ADVICE, ECO-DRIVING (3/4)
– Avoid sudden acceleration.
– Brake as little as possible. If you an-
ticipate an obstacle or bend in ad-
vance, you may then simply release
the accelerator pedal.
– Do not try to maintain the same
speed up a hill, accelerate no more
than you would on the level. Keep
your foot in the same position on the
accelerator pedal.
– Double declutching and accelerating
before switching off are unnecessary
in modern vehicles.
– Bad weather, flooded roads:
Do not drive through
floods if the water is
Driving advice, Eco-driving above the lower edge of
the wheel rims.
Behaviour
– Drive carefully for the first few miles
until the engine reaches its normal
operating temperature, rather than
let it warm up while the vehicle is sta-
tionary. Obstructions to the driver
– Speed is expensive. On the driver’s side, only
– Sporty driving uses a lot of fuel: drive use mats suitable for the
with a light right foot. vehicle, attached with the
– Do not overrev the engine in the in- pre-fitted components, and check
termediate gears. the fitting regularly. Do not lay one
You should always use the highest mat on top of another.
gear possible. There is a risk of wedging the
pedals
2.14
DRIVING ADVICE, ECO-DRIVING (4/4)
– In vehicles fitted with air condi-
tioning, it is normal to observe an
increase in fuel consumption (es-
pecially in urban conditions) when
it is used. For vehicles fitted with
manual air conditioning, switch off
the system when it is not required.
Advice for reducing consumption
and therefore helping to preserve
the environment:
If the vehicle has been parked in the
sun, open the doors for a few mo-
ments to let the hot air escape before
starting the engine.
– Do not leave an empty roof rack
Tyres Advice on use fitted to the vehicle.
– It is better to fit a trailer for bulky ob-
– An underinflated tyre increases fuel – Favour ECO mode. jects.
consumption. – Electricity is fuel; switch off all the – When towing a caravan, fit a wind
– The use of non-recommended tyres electrical components which are deflector and adjust it carefully.
can increase fuel consumption. not really needed. However (safety – Avoid using the car for door-to-door
first), keep your lights on when the calls (short journeys with long waits
visibility is bad (“see and be seen”). in between) because the engine
– Use the air vents. Driving with the never reaches its normal operating
windows open at 60 mph (100 km/h) temperature.
will increase fuel consumption by
4%.
– Never fill the fuel tank right to the
brim to avoid overflow.
2.15
MAINTENANCE AND ANTIPOLLUTION ADVICE
Your vehicle complies with criteria for Maintenance Exhaust gas monitoring
recycling and recovering vehicles at the system
end of their service life, which entered It is important to remember that failure to
into force in 2015. respect antipollution regulations could The exhaust gas monitoring system will
lead to legal action being taken against detect any operating faults in the vehi-
Some parts of your vehicle have there- the vehicle owner. In addition, replacing cle’s antipollution system.
fore been designed to facilitate future engine, fuel supply system and exhaust If this system malfunctions, toxic sub-
recycling. components with parts other than those stances may be released into the at-
These parts are easy to remove so originally recommended by the manu- mosphere or damage may occur.
that they can be recovered and reproc- facturer may alter your vehicle so that
This warning light on the in-
essed by recycling companies. it no longer complies with antipollution
regulations.
Ä strument panel will indicate if
there are any faults in the system:
By virtue of its design, moderate fuel
consumption and initial settings, your Have your vehicle adjusted and This lights up when the ignition is
vehicle also conforms to current anti- checked by an approved Dealer, in ac- switched on and goes out when the
pollution regulations. The manufac- cordance with the instructions given in engine is started.
turer is actively striving to reduce pol- your maintenance schedule: they will – If it lights up continuously, consult an
lutant exhaust gas emissions and to have all the equipment necessary for approved Dealer as soon as possi-
save energy. But the fuel consumption ensuring that your vehicle is maintained ble;
of your vehicle and the level of pollutant to its original standard. – if it flashes, reduce the engine speed
exhaust gas emissions are also your until the light stops flashing. Contact
responsibility. Ensure that it is main- Engine adjustments your approved dealer as soon as
tained and used correctly. possible.
– Air filter, diesel filter: a choked el-
Refer to the information on
ement will reduce efficiency. It must
be replaced.
“Reagent tank” in Section 1.
2.16
ENVIRONMENT
Your vehicle has been designed with Emissions – At the end of the vehicle’s service
respect for the environment in mind for life, it should be sent to approved
its entire service life: during production, Your vehicle has been designed to centres to ensure that it is recycled.
use and at the end of its life. emit fewer greenhouse gases (CO2)
while in use, and therefore to consume – In all cases, comply with local legis-
This commitment is illustrated by the of lation.
the manufacturer eco² signature. less fuel (e.g. 170 g/km, equivalent to
6.4 l/100 km for a diesel vehicle).
Vehicles are also fitted with anti-pollu- Recycling
Manufacture tion systems such as a catalytic con-
Your vehicle is 85% recyclable and
Your vehicle has been manufactured at verter, an oxygen sensor, and more.
95% recoverable.
a factory which complies with a policy For certain diesel vehicles, this system
to reduce the environmental impact To achieve these objectives, many of
also has a particle filter to reduce the
on the surrounding areas (reduction of the vehicle components have been de-
volume of soot particles emitted.
water and energy consumption, visual signed to enable them to be recycled.
and noise pollution, atmospheric emis- The materials and structures have
sions and waste water; sorting and re- Please make your own been carefully designed to allow these
using waste). contribution towards components to be easily removed and
reprocessed by specialist companies.
protecting the environment
too In order to preserve raw material re-
sources, this vehicle incorporates nu-
– Worn parts replaced in the course of merous parts made from recycled plas-
routine vehicle maintenance (vehi- tics or renewable materials (vegetable
cle battery, oil filter, air filter, batter- or animal-derived materials such as
ies, etc.) and oil containers (empty or cotton or wool).
filled with used oil) must be disposed
of through specialist organisations.
2.17
TYRE PRESSURE LOSS WARNING (1/3)
Resetting the standard level
for the tyre pressures
This should be done:
– when the standard tyre pressure
needs to be changed to adapt to
usage conditions (empty, carrying a
1 load, motorway driving, etc.);
– after swapping a wheel (however
this practice is not recommended);
– after changing a wheel.
It should always be done after checking
the tyre pressure of all four tyres when
cold.
Tyre pressures must correspond to the
When fitted to the vehicle, this system current usage of the vehicle (empty,
notifies the driver if one or more tyres carrying a load, motorway driving, etc.).
lose pressure.
2.18
TYRE PRESSURE LOSS WARNING (2/3)
Note: « PUNCTURE »
2 The standard tyre pressure cannot be
less than that recommended and indi-
cated on the door frame.
The warning light comes on
steady, accompanied by the message
3 “PUNCTURE” and a beep.
Display This message appears along with the
Display 2 on the instrument panel in- ® warning light.
forms you of any tyre pressure faults They indicate that at least one wheel
4 (flat tyre, punctured tyre, etc.). is punctured or severely underinflated.
Replace it or contact an approved
« ADJUST TYRE PRESSURE » dealer if it is punctured. Top up the tyre
Warning light comes on, along
with the message “ADJUST TYRE
pressure if the wheel is deflated.
PRESSURE”.
Resetting procedure These indicate that at least one tyre is
With the ignition on: flat.
– repeatedly press button 3 or 4 to Check and, if necessary, readjust the
select the “TYRE PRESSURE SET pressures of the four wheels when cold.
<PRESS-HOLD>” function on the
display 2; The warning light
few minutes’ driving.
goes off after a
– press and hold (around 3 seconds)
button 3 or 4 to start initialisation.
Display of the message “PRESSURE
REF ONGOING” indicates that the
reset request for the tyre pressure
reference value has been taken into
account. Warning light ® re-
Reinitialisation is carried out after a few quires you to stop immedi-
minutes’ driving. ately, for your own safety,
The sudden loss of pressure in a as soon as traffic conditions
tyre (burst tyre, etc.) cannot be de- allow.
tected by the system.
2.19
TYRE PRESSURE LOSS WARNING (3/3)
« CHECK TYRE PRESSURE Replacing wheels/tyres Tyre repair product and
SENSORS » inflation kit
This system requires specific equip-
The warning light flashes for
several seconds, then stays on, along
ment (wheels, tyres, hubcaps, etc.).
Please see the information on “Tyres”
Because the valves are specially de-
signed, only use equipment approved
in Section 5. by the approved network. Please refer
with the message “CHECK TYRE
PRESSURE SENSORS”. Contact an approved Dealer to fit new to “Tyre inflation kit” in Section 5.
tyres and to find out about available ac-
This message appears along with the cessories compatible with the system
© warning light. and available from your dealer net-
They indicate that at least one tyre is work: the use of any other accessory
not fitted with sensors (e.g. emergency could affect the correct operation of the
spare wheel). Otherwise, consult an system or damage a sensor.
authorised dealer.
Emergency spare wheel
Readjustment of tyre If the vehicle is equipped with an emer-
pressures gency spare wheel, it will not have a
The tyre pressures must be adjusted sensor. When it is fitted on the vehicle,
when cold (please refer to the label lo-
cated on the edge of the driver’s door).
the warning light flashes for sev-
eral seconds, then stays on, together
If tyre pressures cannot be checked
with the warning light © and the
when the tyres are cold, the recom-
message “CHECK TYRE PRESSURE
mended pressures must be increased
SENSORS” appears on the instrument
by 0.2 to 0.3 bar (3 PSI).
panel. Changing a wheel
Never deflate a hot tyre.
The system may take sev-
eral minutes depending on
use for the new wheel pres-
sures to be recognised; check the
tyre pressures after all operations.
2.20
DRIVING CORRECTION DEVICES AND AIDS (1/5)
Depending on the vehicle, this is com- Anti-lock braking system Operating faults:
posed of:
– anti-lock braking system (ABS);
(ABS)
Under heavy braking, the ABS prevents
– © and x lit up on the in-
strument panel accompanied by the
– electronic stability program (ESC) the wheels from locking, allowing the messages “CHECK ABS”, “CHECK
with understeer control and trac- stopping distance to be managed and BRAKING SYSTEM” and “Check
tion control; keeping control of the vehicle. ESC”: this indicates that the ABS,
Under these circumstances, the vehi- the ESC and the emergency brake
– driver assistance with a trailer; assist are disabled. Braking is
cle can be steered to avoid an obstacle
– emergency brake assist; whilst braking. In addition, this system always enabled;
– grip control; can increase stopping distances, par-
– hill start assistance.
ticularly on roads with low surface grip
(wet ground etc.).
– xD , , © and ® lit
up on the instrument panel alongside
You will feel a pulsation through the the message “Braking system fault”:
brake pedal each time the system is this indicates a fault in the braking
activated. The ABS does not in any system.
way improve the vehicle's physical per-
In both cases, please consult an
formance relating to the road surface
Authorised Dealer.
and road-holding. It is still essential to
follow the rules of good driving practice
(such as driving at a safe distance from
the vehicle in front etc.).
2.21
DRIVING CORRECTION DEVICES AND AIDS (2/5)
Electronic stability program Understeer control Operating faults
(ESC) with understeer control This system optimises the action of the When the system detects an operat-
and traction control ESC in the case of pronounced under- ing fault the message “Check ESC” and
steer (loss of front axle road holding).
Electronic stability control ESC
Traction control
warning light © and appear
on the instrument panel. In this case,
This system helps you to keep control the ESC and traction control system
of the vehicle in critical driving condi- This system helps to limit wheelspin of are deactivated.
tions (avoiding an obstacle, loss of grip the drive wheels and to control the ve- Consult an approved dealer.
on a bend, etc.). hicle when pulling away accelerating or
decelerating.
Operating principle
Operating principle
A sensor in the steering wheel detects
Using the wheel sensors, the system
the direction selected by the driver.
measures and compares the speed of These functions are an ad-
Other sensors throughout the vehicle the drive wheels at all times and slows ditional aid in the event of
measure the actual direction. down their over-rotation. If a wheel is critical driving conditions,
The system compares driver input to starting to slip, the system brakes au- enabling the vehicle behav-
the actual trajectory of the vehicle and tomatically until the drive supplied be- iour to be adapted to suit the driving
corrects the trajectory if necessary by comes compatible with the level of grip conditions.
controlling the braking of certain wheels under the wheel again.
The functions do not take the place
and/or engine power. In the event that The system also adjusts the engine of the driver. They do not increase
the system is engaged, indicator light speed to the grip available under the the vehicle’s limits and should
wheels, independently of the pressure
flashes on the instrument panel. exerted on the accelerator pedal.
not encourage you to drive more
quickly. Therefore, they can under
no circumstances replace the vigi-
lance or responsibility of the driver
when manoeuvring the vehicle (the
driver must always be ready for
sudden incidents which may occur
when driving).
2.22
DRIVING CORRECTION DEVICES AND AIDS (3/5)
Driver assistance with a Emergency brake assist Braking anticipation
trailer This system supplements the ABS Depending on the vehicle, when you
This system helps to maintain control and helps reduce vehicle stopping dis- rapidly release the accelerator, the
over the vehicle while using a trailer. tances. system anticipates the braking ma-
It detects shaking caused by towing a noeuvre in order to reduce stopping
trailer under certain driving conditions. Operating principle distances.
Operating conditions The system is for detecting an emer- When using the cruise control:
– The towbar must be approved by an gency braking situation. In this case, – if you use the accelerator, when you
authorised dealer; the braking assistance immediately de- release it, the system may be trig-
– the harness must be approved by an velops maximum power and may trig- gered;
authorised dealer; ger ABS regulation. – if you do not use the accelerator, the
– the towbar must be connected to the ABS braking is maintained as long as system will not be triggered.
vehicle. the brake pedal is applied. Operating faults
Operating principle
The function stabilises the vehicle by: Hazard warning lights switching on When the system detects an operating
– asymmetric braking of the front Depending on the vehicle, these may fault the message “CHECK BRAKING
wheels to reduce shaking caused by light up in the event of sudden decel- SYSTEM” appears on the instrument
the trailer; eration. panel along with the © warning
– braking of all four wheels and limita- light.
tion on engine torque to reduce the
Consult an approved dealer.
vehicle speed until the shaking has
stopped.
Warning light flashes on the in-
strument panel to inform the driver.
2.23
DRIVER CORRECTION DEVICES AND AIDS (4/5)
Grip control “Soft ground” mode
If fitted on the vehicle, grip control
makes it easier to control the vehicle on
Press the switch 1: warning light
comes on the instrument panel accom-
low grip surfaces (soft ground, etc.).
panied by the message “NON GRIP
ROAD MODE ON”.
This position enables optimal usage on
soft ground (mud, sand, dead leaves,
etc.). In this position, engine speed
1 is left under the driver’s control. The
system automatically switches to”Road”
mode at speeds above about 31 mph
2.24
DRIVING CORRECTION DEVICES AND AIDS (5/5)
Hill start assistance The hill start assistance
Depending on the gradient of the in- system cannot completely
cline, this system assists the driver prevent the vehicle from
when starting on a hill. It prevents the rolling backwards in all sit-
vehicle from rolling backwards, de- uations (extremely steep gradients
pending on the slope, by automatically etc.).
applying the brakes when the driver lifts
In all cases, the driver may depress
his/her foot off the brake pedal to de-
the brake pedal to prevent the vehi-
press the accelerator pedal.
cle from rolling backwards.
System operation The hill start assistance function
It only operates when the gear lever is should not be used for prolonged
in a position other than neutral and the stops: use the brake pedal.
vehicle is completely stationary (brake This function is not designed to im-
pedal depressed). mobilise the vehicle permanently.
The system holds the vehicle for ap- If necessary, use the brake pedal to
proximately 2 seconds. The brakes are stop the vehicle.
then gradually released (the vehicle will
The driver must remain particularly
move according to the slope).
vigilant when driving on slippery or
low-grip surfaces.
Risk of serious injury.
2.25
SPEED LIMITER (1/3)
2 3 4 5
2.26
SPEED LIMITER (2/3)
Varying the limit speed Exceeding the limit speed
The limit speed may be changed by re- It is possible to exceed the limit speed
peatedly pressing: at any time. To do this: press the accel-
– switch 2 (+) to increase speed; erator pedal firmly and fully (beyond
the resistance point).
– switch 3 (-) to reduce speed.
If the speed is exceeded, the limited
2 3 speed flashes on the instrument panel
accompanied by a beep.
Then, release the accelerator: the
speed limiter function will return as
soon as you reach a speed lower than
the stored speed.
2.27
SPEED LIMITER (3/3)
Recalling the limit speed
If a speed has been saved, it can be re-
called by pressing switch 4 ((R)).
2 3 4 5
2.28
CRUISE CONTROL (1/4)
2 3 4 5
1
This function is an addi-
tional driving aid. The func-
tion does not take the place
of the driver.
Therefore, it can under no circum-
The cruise control function helps you to stances replace the driver’s respon- Controls
maintain your driving speed at a speed sibility to respect speed limits and to
that you choose, called the cruising 1 Main “On/Off” switch.
be vigilant (the driver must always
speed. be ready to brake). 2 Cruising speed activation, storage
This cruising speed may be set at any and increase switch (+).
Cruise control must not be used in
speed above 20 mph (30 km/h). heavy traffic, on undulating or slip- 3 Decreasing cruising speed (-).
pery roads (black ice, aquaplan- 4 Activation with recall of saved cruis-
ing, gravel) and during bad weather ing speed (R).
(fog, rain, side winds etc.).
5 Switch the function to standby (with
There is a risk of accidents. cruising speed saved) (O).
2.29
CRUISE CONTROL (2/4)
6
2 3
2.30
CRUISE CONTROL (3/4)
Exceeding the cruising speed
The cruising speed may be exceeded
at any time by depressing the accelera-
tor pedal. While it is being exceeded,
the cruising speed flashes on the in-
strument panel.
2 3 Then, release the accelerator: after a
few seconds, the vehicle will automati-
cally return to its set cruising speed.
2.31
CRUISE CONTROL (4/4)
Returning to the cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road con-
ditions are suitable (traffic, road sur-
face, weather conditions, etc.). Press
switch 4 (R) if the vehicle speed is
above 20 mph (30 km/h).
2 3 4 5 When the stored speed is recalled, acti-
vation of the cruise control is confirmed
by the illumination of the warning 1
light.
NB: if the speed previously stored is
much higher than the current speed,
the vehicle will accelerate more rapidly
to reach this threshold.
Putting the function on Switching off the function
standby The cruise control function is deacti-
The function is set to standby if you: vated if you press switch 1: in this case
a speed is no longer stored. The two in-
– use the switch 5 (O);
strument panel warning lights and
– the brake pedal; go out to confirm that the function is
– the clutch pedal; deactivated.
In all three cases, the cruising speed
remains stored and the message
“MEMORISED” appears on the instru-
ment panel. When the cruise control function is
Putting the cruise control
put on standby, pressing switch 2
Standby is confirmed when indicator on standby or switching it
(+) reactivates the cruise control
light goes out. off does not cause a rapid
function without taking into account
reduction in speed: you
the stored speed: it is the speed at
must brake by depressing the brake
which the vehicle is moving that is
pedal.
taken into account.
2.32
VEHICLE WITH OVERSPEED FUNCTION
Special case: if your vehicle is fitted
with the Cruise control/Speed limiter,
fully depressing the accelerator pedal
(beyond the kickdown point) will not
allow you to exceed the overspeed
function set speed (refer to the informa-
tion on the “Speed limiter” in Section 2).
2.33
FAST IDLE SPEED
Switching off the function
The function is interrupted when:
– you depress the clutch pedal and/or
accelerator pedal;
1 – the vehicle speed is above 0 mph;
– the ® indicator light is lit up on
the instrument panel;
– the © indicator light is lit up on
the instrument panel;
2.34
PARKING DISTANCE CONTROL (1/2)
Operating principle
Ultrasonic detectors, installed in the
rear bumper (depending on the vehi-
cle), measure the distance between the
vehicle and an obstacle whilst revers- 1
ing.
This measurement is indicated by
beeps which become more frequent the
closer you come to the obstacle, until
they become a continuous beep when
the vehicle is approximately 30 centi-
metres from the obstacle.
When reverse gear is selected, most
objects which are less than approxi-
mately 1.20 metres from the rear of the
vehicle are detected, a beep sounds The parking distance control system Note: make sure that the ultrasonic
and, depending on the vehicle, the dis- does not take into account towing and sensors are not obscured (by dirt, mud,
play 1 shows the area around the ve- load carrying systems etc. snow, etc.).
hicle.
2.35
PARKING DISTANCE CONTROL (2/2)
The system is automatically reactivated
after the ignition is switched off and the
engine restarted.
2.36
REVERSING CAMERA (1/2)
Operation Note: make sure that the reversing Note: depending on the vehicle, you
camera is not obscured (by dirt, mud, can adjust certain settings from the
Moving into reverse gear, the camera 1 snow, condensation, etc.). multimedia display 3. Refer to the
located on the tailgate or, depending handbook for the equipment.
on the vehicle, on the rear hinged door,
provides a view of the area behind the
vehicle on the rear-view mirror 2 or, de-
pending on the vehicle, on the multi-
media display 3, accompanied by two
moving or fixed guide lines 4 and 5.
This function is an additional aid. It cannot, therefore, under any circum-
stances replace the vigilance or the responsibility of the driver.
The driver should always be ready for sudden incidents while driving:
always ensure that there are no small, narrow moving obstacles (such
as a child, animal, pushchair, bicycle, stone, post, etc.) in the blind spot when
manoeuvring.
2.37
REVERSING CAMERA (2/2)
This gauge remains fixed and indicates
the vehicle trajectory if the wheels are
in line with the vehicle.
4 5
This system is initially used with the aid
of several gauges (mobile for trajectory
C and fixed for distance). When the red
zone is reached, use the bumper image
B to stop accurately.
A
2.38
Section 3: Your comfort
7 8 7
3.2
AIR VENTS, air outlets (2/2)
To remove bad odours from your ve-
9 hicles, only use the systems designed
for this purpose. Consult an approved
Dealer.
11 12
10
3.3
MANUAL AIR CONDITIONING (1/4)
1 2 3 4 5 Adjusting the ventilation fan
speed
Turn control 3 from 0 to 4. The further to
the right it is positioned, the more air is
blown into the passenger compartment.
If you want to shut off the flow of air, set
control 3 to 0.
The system is deactivated: the ventila-
tion speed for the passenger compart-
ment air is zero (vehicle stationary),
you can however still feel a slight flow
of air when the vehicle is moving.
Note
Leaving this control in position 0 for
prolonged periods can lead to conden-
Controls Information and advice on use: refer
sation forming on the side windows and
to information on “Air conditioning: in-
The controls will depend on the vehicle formation and advice on use”. windscreen and problems due to the
equipment level. use of non-renewed air in the passen-
1 Distribution of air. ger compartment.
Adjusting the air temperature
2 Switching air conditioning on or off. Rapid demisting
Turn control 5 to obtain the desired
3 Adjusting the ventilation fan speed. temperature. The further towards the Isolation of the passenger compart-
4 Switching passenger compartment red the slide is, the higher the tempera- ment/air recirculation deactivated
isolation mode/air recirculation mode ture will be. (warning light integrated in button 4 is
on
5 Air temperature adjuster.
off), put controls 1 and 3 to
sitions.
W po-
3.4
MANUAL AIR CONDITIONING (2/4)
1 3 4
3.5
MANUAL AIR CONDITIONING (3/4)
1 2 3
3.6
MANUAL AIR CONDITIONING (4/4)
2 3
3.7
AUTOMATIC CLIMATE CONTROL (1/4)
1 2 3 4 5 Varying the ventilation speed
In automatic mode, the system uses
the most suitable amount of air to reach
and maintain the desired comfort level.
You can still adjust the ventilation
speed by turning control 6 to increase
or reduce the ventilation speed.
3.8
AUTOMATIC CLIMATE CONTROL (2/4)
Clear View function 1 3 4
Press button 3 – the integrated indica-
tor light comes on.
This function quickly demists and de-
ices the windscreen, the rear screen,
the front side windows, and the door
mirrors (depending on the vehicle). The
air conditioning and rear screen de-ic-
ing functions must be activated.
Press button 8 to stop the heated rear
screen operating, and the integrated in-
dicator goes out.
To exit this function, press button 3
or 1. 8
Adjusting the distribution The air flow is distributed be-
of air in the passenger
Ø tween all the air vents, the
front side window demisting air vents
compartment and the windscreen demisting vents.
Press one of the buttons 4. The in-
The air flow is mainly directed
tegrated warning light in the button
comes on.
½ to the dashboard air vents.
The air flow is directed mainly
It is possible to combine two positions
simultaneously – press both buttons 4.
¿ towards the footwells.
3.9
AUTOMATIC CLIMATE CONTROL (3/4)
5
8
Rear screen de-icing/ Switching air conditioning on
demisting or off
Press button 8 – the integrated indica- In automatic mode, the system switches
tor light comes on. This function en- the air conditioning system on or off,
ables rapid demisting or de-icing of the depending on the climate conditions.
rear screen and de-icing of the door Press button 5 to switch off the air
mirrors (on equipped vehicles). conditioning; the integrated indicator
To exit this function, press button 8 comes on.
again. Demisting automatically stops.
Vehicles fitted with the ECO
mode (button 9): Once activated,
the ECO mode may reduce the ef-
Do not open the refriger- fective performance of the air condi-
ant fluid circuit. The fluid tioning. Please refer to the informa-
may damage eyes or skin. tion on “Driving advice, Eco-driving”
in Section 2.
3.10
AUTOMATIC CLIMATE CONTROL (4/4)
1 Manual use
Press button 7 – the integrated indica-
tor light comes on.
Prolonged use of this position may lead
to odours, caused by non-renewal of
air, and the formation of condensation
on the windows.
We therefore advise you to return to au-
tomatic mode as soon as air recircula-
tion is no longer needed, by pressing
button 7.
To exit this function, press button 7
again.
7 6
Air recirculation (isolation of NB: Stopping the system
the passenger compartment) – during recirculation, air is taken from
the passenger compartment and Turn control 6 to “OFF” to stop the
K is recycled, with no air being taken
from outside the vehicle;
system. To start, turn control 6 again
to adjust the blower speed or press
This function is managed automatically button 1.
– air recirculation allows the external
(operation is confirmed by a warning
atmosphere to be cut off (when driv-
light on button 7), but you can also acti-
ing in polluted areas, etc.);
vate it manually.
– bringing the passenger compartment
to the desired temperature as quickly
as possible.
3.11
AIR CONDITIONING: information and operating instructions (1/2)
Advice on use Fuel consumption Operating faults
In some situations (air conditioning off, You will normally notice an increase in As a general rule, contact your ap-
air recirculation activated, ventilation fuel consumption (especially in town) proved dealer in the event of an oper-
speed at zero or low etc.), you may when the air conditioning is operating. ating fault.
notice that condensation starts to form For vehicles fitted with air conditioning – Reduction in de-icing, demisting
on the windows and windscreen. with no automatic mode, switch off the or air conditioning performance.
If there is condensation, use the “Clear system when it is not required. This may be caused by the passen-
View” function to remove it, then use Advice for reducing consumption ger compartment filter cartridge be-
the air conditioning in automatic mode and helping to preserve the coming clogged.
to stop it forming again. environment – No cold air is being produced.
Drive with the air vents open and the Check that the controls are set cor-
windows closed. If the vehicle has been rectly and that the fuses are sound.
parked in the sun, open the doors for a Otherwise, switch off the system.
few moments to let the hot air escape
before starting the engine.
Presence of water under the
Vehicles equipped with vehicle
modeECO Maintenance
Refer to the Maintenance Document After prolonged use of the air condi-
Once activated, ECO mode may tioning system, it is normal for water
reduce air conditioning perform- for your vehicle for the inspection fre-
quency. to be present under the vehicle. This is
ance. Please refer to the informa- caused by condensation.
tion on “Driving advice, Eco-driving”
in Section 2.
3.12
AIR CONDITIONING: information and operating instructions (2/2)
Type of refrigerant fluid
A A A Ñ
Type of oil in the air condi-
tioning circuit
Inflammable product
Consult the driver’s hand-
book
Maintenance
Quantity of refrigerant
x.xxx kg fluid present in the ve-
hicle.
The refrigerant circuit may contain
fluorinated greenhouse gases. Global Wa r m i n g
Depending on the vehicle, you will find GWP xxxxx Potential (CO2 equi-
the following information on label A af- valent).
fixed inside the engine compartment.
The presence and location of the infor- CO2 eq Quantity in weight and
mation on label A depends on the ve- x.xx t in CO2 equivalent.
hicle.
3.13
ADDITIONAL AIR CONDITIONING (1/2)
On equipped vehicles, there are four Vehicle fitted with manual air
adjustable air vents and controls 1. conditioning
These controls only affect the amount Make sure that the air conditioning is
of air blown into the passenger com- operational (warning light on button 2
partment: lit up).
– one control for hot (air comes from Note: the button 2 has an operation
lower vents); warning light:
– one control for cold (air comes from – indicator light on, the function is
upper vents). switched on;
Note: avoid closing the four air vents – indicator light off, the function is
at the same time (risk of damaging the switched off.
system components).
3.14
ADDITIONAL AIR CONDITIONING (2/2)
1 5
3
4
Vehicle fitted with automatic Note: the switch 4 and the control 1
air conditioning have an operation warning light:
Make sure that the air conditioning is – warning lights 4 and 5 lit, control 1 is
operational (warning light on A/C OFF not activated;
button 3 switched off). – warning lights 4 and 5 off, control 1 is
To activate the control settings for 1, in operation.
press the switch 4. Switch 4 warning
light and 5 control 1 warning light are
off.
3.15
WINDOWS (1/2)
3
1
2
Driver’s responsibility
Never leave your vehicle
with the RENAULT card or
key inside, and never leave
a child, adult who is not self-suffi-
Electric windows From the front passenger seat cient or a pet, even for a short while.
They may pose a risk to themselves
Press switch 3. or to others by starting the engine
With the ignition on:
or activating equipment (such as
– press the switch for the window the gear lever or electric windows).
concerned to lower it to the desired If any part of the body becomes
height; trapped, reverse the direction of the
– lift the switch for the window con- window immediately by pressing the
cerned to raise it to the desired relevant switch.
height. Risk of serious injury.
From the driver’s seat
Operate the switches as follows:
– 1 for the driver’s side;
– 2 for the front passenger side. Avoid resting any objects against a
half-open window: there is a risk that
the electric window winder could be
damaged.
3.16
WINDOWS (2/2)
Operating faults
In case of a fault when closing a window,
the system reverts to normal mode:
pull the switch concerned up as often
as necessary to fully close the window
(the window will close gradually), hold
1 the switch (still on the closure side) for
one second then lower and raise the
window fully to reinitialise the system.
If necessary, contact your authorised
dealer.
4
3.17
SUN VISOR
1 2
1
3.18
INTERIOR LIGHTING (1/3)
3
1 1 4
3.19
INTERIOR LIGHTING (2/3)
6
5
3.20
INTERIOR LIGHTING (3/3)
7
Light for rear seats 7 Rear light 8
Press the switch 7 to activate: Turn the switch 9 to activate:
– permanent lighting; – permanent lighting;
– lighting controlled by opening one of – intermittent lighting, which comes
the doors. on when a rear door is opened. The
light only goes out when the doors
are correctly closed;
– lighting switches off immediately.
3.21
PASSENGER COMPARTMENT STORAGE, FITTINGS (1/9)
1 4
3
2
Location 1 Sun visor storage 4
This location can be used as a cup This can be used for storing motorway
holder, a storage compartment or as a tickets, cards, etc.
receptacle to fit the ashtray.
Storage compartment 3
To open, pull the handle 2.
3.22
PASSENGER COMPARTMENT STORAGE, FITTINGS (2/9)
3.23
PASSENGER COMPARTMENT STORAGE, FITTINGS (3/9)
8 8
7
3.24
PASSENGER COMPARTMENT STORAGE, FITTINGS (4/9)
12
11
10 15
14
13
16
3.25
PASSENGER COMPARTMENT STORAGE, FITTINGS (5/9)
19
18
17
20
Location 17 Front door storage Storage compartment 20
This location can be used as a cup compartments 18 under the front seat
holder, a storage compartment or as a To access this, pull the tab 19 and move
receptacle to fit the ashtray. the seat A forwards.
3.26
PASSENGER COMPARTMENT STORAGE, FITTINGS (6/9)
23 27
22
24
21 25 26
17
3.27
PASSENGER COMPARTMENT STORAGE, FITTINGS (7/9)
23 32
31
30 23
29
33
28
To install the tray, insert the end To remove the tray, press the con-
pieces 31 of the tray into the slots 28 trol 33.
or 29. NB: Make sure you replace the tray
and remove any item from the cup
holder before raising the centre seat
back. Check that the back of the centre
seat is properly locked. Ensure that no hard, heavy
or pointed objects are
placed in the open storage
compartments in such a
way that they may fall on any pas-
sengers during sudden turning, bra-
king or in the event of an accident.
3.28
PASSENGER COMPARTMENT STORAGE, FITTINGS (8/9)
35 36
34
3.29
PASSENGER COMPARTMENT STORAGE, FITTINGS (9/9)
37
39
B
41
38
40
Recess 38 and flap 40 Use the flap 40 to extend the load
length:
Depending on the length of the objects – pull the tab 39 to raise the seat B;
being transported in the rear load area, – move the flap 40 towards the interior
you can use the recess 38. of the seat by pulling the tab 41.
Open the flap 37, held in place by mag-
nets.
3.30
ASHTRAY, ACCESSORIES SOCKET (1/2)
1
Ashtray
It can be housed in either position 1
or 2.
3.31
ASHTRAY, ACCESSORIES SOCKET (2/2)
Accessories socket
The 3 socket and, depending on the
vehicle, sockets 4 and 5 are designed
for connecting accessories which
have been approved by our Technical
Department. Their power level should
not exceed 120 Watts (12V).
Connect accessories
with a maximum power of
120 watts (12 V) only.
When several accessory
Before leaving the vehicle, ensure sockets are used at the same time,
that you always disconnect all de- the total power of the connected
vices from the accessories sockets accessories must not exceed
to avoid possible malfunctions (dis- 180 watts.
charged battery, locking the opening Fire hazard.
elements not possible etc.).
3.32
REAR HEAD RESTS
3.33
REAR BENCH SEATS: functions (1/4)
A 3
4
5
3.34
REAR BENCH SEATS: functions (2/4)
1
C
7 C
6
3.35
REAR BENCH SEATS: functions (3/4)
2 9 H
E 9
C
G
D F
3.36
REAR BENCH SEATS: functions (4/4)
3.37
LUGGAGE COVER
A A 1
3.38
LUGGAGE NET (1/2)
1
2
3
A
5 7
On equipped vehicles, the luggage Fitting the luggage net Lower mounting:
net A can be used, when transporting behind the front seats – attach hook 5 of the luggage strap
animals or luggage, to separate them onto ring 7 at the base of the bench
from the passenger section. Inside the vehicle on each side:
seat,
It can be positioned: Upper mounting:
– adjust the net strap so that it is taut.
– behind the front seats; – lift and hold the cover 2, using a flat-
blade screwdriver, to access the Removal
– behind a rear bench seat. mounting hole,
Loosen the strap by lifting adjustment
– fully insert the top rod 1 of the net device 6 upwards. Detach the belts.
into the largest section 3 of the hole,
– slide the rod into the lower section 4
of the hole.
Make sure that the rod
end 1 is supported by the
metal part and not the plas-
tic part of the cover.
3.39
LUGGAGE NET (2/2)
1
2
A 3
4
8
5
3.40
TRANSPORTING OBJECTS (1/2)
1
1
3.41
TRANSPORTING OBJECTS (2/2)
3.42
TRANSPORTING OBJECTS towbar
1 1
2
Fitting the towbar coupling Permissible nose weight, maxi-
ball mum permissible towing weight,
Position the ball within the range of braked and unbraked: refer to
bolts 1 or 2, to respect the height B, the information on “Weights” in
which must be between 350 and Section 6.
420 mm, with the vehicle laden (use the
illustration example below). Choice and fitting of towing
equipment
To assemble the towbar ball, please
consult the equipment assembly in- Maximum weight of towing equip-
structions. ment: 22 kg
To assemble the towbar ball, please
B consult the equipment assembly in-
structions.
Please keep these instructions with
Fitting towing equipment the rest of the vehicle documenta-
tion.
A: 1,090 mm
3.43
MULTIMEDIA EQUIPMENT
1 2
4 5
3
The presence and location of this
equipment depends on the vehicle’s
multimedia equipment.
1 Multimedia sockets;
2 multimedia touchscreen;
3 steering column control;
4 Voice command;
5 microphone.
3.44
Section 4: Maintenance
Bonnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2
Engine oil level: general information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4
Engine oil level: topping up/filling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5
Oil change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6
Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7
engine coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7
brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8
windscreen washer reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9
Tyre pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.12
Bodywork maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.14
Interior trim maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.17
4.1
BONNET (1/2)
4.2
BONNET (2/2)
Closing the bonnet
Check that nothing has been left in the
engine compartment.
To close the bonnet again, hold the
bonnet in the middle and lower it to
30 cm above the closed position, then
release it. It will latch automatically
under its own weight.
2
Unlocking the bonnet catch
To unlock, push the tab 2 to the left as
you open the bonnet.
4.3
ENGINE OIL LEVEL: general information
It is normal for an engine to use oil for Reading the oil level
lubrication and cooling of moving parts
and it is normal to top up the level be- The oil level should be read with the ve-
tween oil changes. hicle on level ground, after the engine
has been switched off for some time.
However, contact your approved
Dealer if more than 0.5 litres is being B The dipstick must be used to read
consumed every 600 miles (1,000 km) the exact oil level and make sure that
A the maximum level has not been ex-
after the running in period.
ceeded (risk of engine damage).
Oil change frequency: check the oil
level from time to time and certainly The instrument panel display only
before any long journey to avoid the alerts the driver when the oil level is at
risk of damaging your engine. its minimum.
– remove the dipstick and wipe with a
clean, lint-free cloth;
– push the dipstick in as far as it will
go;
– take out the dipstick again;
– read the level: it should never fall
below minimum mark A or exceed
maximum mark B.
Once the level has been read, push the
Exceeding the maximum dipstick in as far as it will go.
engine oil level
Under no circumstances
should maximum filling
level B be exceeded: this could
Before performing any damage the engine and the cata-
action in the engine com- lytic converter.
partment, the ignition must If the level exceeds the maximum
be switched off (please see level, do not start your vehicle and In order to prevent splashback, it is
the information on “Starting, stop- contact an authorised dealer. recommended that a funnel be used
ping the engine” in Section 2). when topping up/filling with oil.
4.4
ENGINE OIL LEVEL: topping up/filling (1/2)
4.5
ENGINE OIL LEVEL: topping up, filling (2/2) OIL CHANGE
1 – Unscrew cap 1; Oil change
– top up the level (as a guide, the ca- Service interval: refer to the
pacity between the minimum and Maintenance Service Booklet for your
maximum reading on the dipstick 2 vehicle.
is between 1.5 and 2 litres, depend-
ing on the engine);
Oil change capacity
– wait for approximately 10 minutes to
allow the oil to flow into the engine; Please refer to the maintenance docu-
ment for your vehicle, or contact an au-
– check the level using the dipstick 2 thorised dealer.
2 (as described above). Always check the engine oil level using
Once the operation has been com- the dipstick, as explained previously (it
pleted, ensure that the dipstick is should never fall below the minimum
pushed in as far as it will go and that level, or be over the maximum level on
the cap is completely screwed in. the dipstick).
Topping up/filling
The vehicle must be parked on level Engine oil grade
ground and the engine should be cold Refer to the Maintenance Service
(for instance, before the engine is Booklet for your vehicle.
started up for the first time in the day).
4.6
LEVELS (1/3)
4.7
LEVELS (2/3)
Frequency of checking coolant level Level 2
Check the coolant level regularly It is normal for the level to drop as the
(very severe damage is likely to be brake shoes become worn, but it must
caused to the engine if it runs out of never drop lower than the “MINI" warn-
coolant). ing line.
If the level needs to be topped up, only If you wish to check the disc and drum
use products approved by our Technical wear yourself, you should obtain the
Department which ensure: document explaining the checking pro-
– protection against freezing; cedure from the manufacturer's net-
work or website.
– an anti-corrosion protection for the
cooling system.
2 Topping up
Replacement interval After any operation on the hydraulic cir-
Refer to the Maintenance Document for cuit, a specialist must replace the brake
your vehicle. fluid.
Only use fluids approved by our
Brake fluid Technical Department (and taken from
a sealed container).
The level should be read with the engine
switched off and on level ground.
Replacement interval
This should be checked frequently,
and immediately if you notice even the Refer to the Maintenance Document for
slightest loss in braking efficiency. your vehicle.
4.8
LEVELS (3/3)/FILTERS
Filters
The replacement of filter components
(air filter, cabin filter, diesel filter, etc.)
is scheduled in the maintenance opera-
tions for your vehicle.
3
Replacement intervals for filter el-
ements: refer to the Maintenance
Document for your vehicle.
Windscreen washer
reservoir
Topping up
With the engine switched off, open the
cap 3. Fill until you can see the fluid,
then refit the cap.
Liquid
Screen wash product (product with an-
tifreeze in winter).
4.9
TYRE PRESSURE (1/2)
Vehicle fitted with a tyre pressure
A loss warning system
In the event of underinflation (punc-
tures, underinflation etc.), the
warning light on the instrument panel
comes on. Please refer to the informa-
tion on the “Tyre pressure loss warning”
in Section 2.
For your safety, please re-
spect the speed limit.
When they need to be re-
placed, only tyres of the
same make, size, type and profile
should be used on a single axle.
Label A They must: either have a load ca-
Open the driver’s door to read it. pacity and speed rating at least
equal to those of the original
Tyre pressures should be checked tyres, or conform to those recom-
when the tyres are cold. mended by an authorised dealer.
If the tyre pressures cannot be checked Failure to heed these instructions
when the tyres are cold, increase the could endanger your safety and
pressures from 0.2 to 0.3 bar (or 3 PSI). affect your vehicle’s roadworthi-
Never deflate a hot tyre. ness.
Risk of loss of control of the ve-
hicle.
4.10
TYRE PRESSURE (2/2)
E: tyre pressures for the rear wheels Tyre safety and the use of chains:
A (motorway) or when driving with a please refer to the information on
significant load. “Tyres” in Section 5 for servicing con-
ditions and, depending on the version,
the use of chains.
B C
D E
4.11
BATTERY (1/2)
4.12
BATTERY (2/2)
A 2 3 4
2
7 6 5
This is located under cover 1 and does Label A
not need to be serviced. You should Observe the indications on the battery:
not open it or add any fluid. – 2 naked flames and smoking are for-
bidden;
– 3 eye protection required;
Replacing the battery – 4 keep away from children;
As this operation is complex, we advise – 5 explosive materials;
you to contact an approved Dealer. – 6 refer to the handbook;
– 7 corrosive materials.
4.13
BODYWORK MAINTENANCE (1/3)
A well-maintained vehicle will last You should Respect local regulations about wash-
longer. It is therefore recommended to ing vehicles (e.g. do not wash your ve-
maintain the exterior of the vehicle reg- Wash your car frequently, with the hicle on a public highway).
ularly. engine off, with cleaning products rec-
ommended by the manufacturer (never Observe the vehicle stopping distances
Your vehicle has been treated with very use abrasive products). Rinse thor- when driving on gravelled surfaces to
effective anti-corrosion products. It is oughly beforehand with a jet: prevent paint damage.
nevertheless subject to various outside – spots of tree resin and industrial Repair, or have repaired quickly, areas
influences. grime; where the paint has been damaged, to
– mud in the wheel arches and under- prevent corrosion spreading.
Corrosive agents in the atmosphere neath the body which forms damp
– atmospheric pollution (built-up and patches; Remember to visit the body shop pe-
industrial areas); – bird droppings, which cause a riodically in order to maintain your
– saline atmospheres (near the sea, chemical reaction with the paint that anti-corrosion warranty. Refer to the
particularly in hot weather); rapidly discolours paintwork and Maintenance Document.
– seasonal and damp weather condi- may even cause the paint to peel If it is necessary to clean mechani-
tions (e.g. road salt in winter, water off; cal components, hinges, etc., spray
from road cleaners, etc.). wash the vehicle immediately to them with products approved by our
remove these marks since it is im- Technical Department to protect them
Minor impacts possible to remove them by polish- after they have been cleaned.
Abrasive action ing;
Dust and sand in the air, mud, road grit – salt, particularly in the wheel arches
thrown up by other vehicles, etc. and underneath the body after driv-
ing in areas where the roads have
You should take a number of minor pre- been gritted.
cautions in order to safeguard your ve-
hicle against such risks. Remove any plant matter (resin, leaves,
etc.) from the vehicle regularly.
4.14
BODYWORK MAINTENANCE (2/3)
What you should not do
Wash the vehicle in bright sunlight or
freezing temperatures. Degrease or clean using
high-pressure cleaning
Do not scrape off mud or dirt without equipment or by spray-
pre-wetting. ing on products not ap-
Allow dirt to accumulate on the exterior. proved by our Technical
Allow rust to form following minor im- Department:
pacts. – mechanical components (e.g.:
engine compartment);
Do not use solvents not approved by – underbody;
our Technical Department to remove – parts with hinges (e.g.: inside the
stains as this could damage the paint- doors);
work. – painted plastic external fittings (e.g.:
Do not drive in snow or muddy condi- bumpers).
tions without washing the vehicle, par- Doing this could give rise to corrosion
ticularly under the wheel arches and or operational faults.
body.
4.15
BODYWORK MAINTENANCE (3/3)
Vehicles with a matte paint Using a roller type car wash Cleaning the headlights
finish Return the windscreen wiper stalk to As the headlights are made of plastic
This type of paint requires certain pre- the Park position (refer to the informa- “glass”, use a soft cloth or cotton wool
cautions. tion on the “Windscreen washer, wiper” to clean them. If this does not clean
in Section 1). Check the mounting of them properly, moisten the cloth with
You should do the following external accessories, additional lights soapy water, then wipe clean with a soft
and mirrors, and ensure that the wiper damp cloth or cotton wool.
Wash the vehicle by hand using plenty
blades are secured with adhesive tape. Finally, carefully dry off with a soft dry
of water, using a soft cloth or a gentle
Remove the radio aerial mast if your cloth.
sponge.
vehicle is fitted with this equipment. Do not use cleaning products con-
Do not do the following taining alcohol or utensils (e.g.: a
Remember to remove the tape and refit
Use wax-based products (polishing). the antenna after washing. scraper).
Rub too hard.
Wash the vehicle in a roller-type car
wash.
Attach stickers to the paintwork (risk of
leaving marks).
4.16
INTERIOR TRIM MAINTENANCE (1/2)
A well-maintained vehicle will last Glass instrument panel Textiles (seats, door trim, etc)
longer. It is therefore recommended to (e.g. instrument panel, clock, exterior
maintain the interior of the vehicle regu- Vacuum-clean the textiles regularly.
temperature display, radio display, etc.)
larly. Liquid stain
Use a soft cloth (or cotton wool).
A stain should always be dealt with If this does not clean them properly, Use soapy water.
swiftly. use a soft cloth (or cotton wool) slightly
moistened with soapy water and then Dab lightly (never rub) with a soft cloth,
Whatever type of stain is on the trim, rinse and remove the excess.
use cold (or warm) soapy water with wipe clean with another soft damp cloth
natural soap. or cotton wool.
Finally, carefully dry off with a soft dry Solid or pasty stain
Detergents (washing-up liquid, pow- cloth. Carefully remove the excess solid or
dered products, alcohol-based prod- pasty material immediately with a
ucts) should not be used. Do not use products containing alco-
hol and/or spray fluids on the area. spatula (working from the edges to the
Use a soft cloth. centre to avoid spreading the stain).
Clean as for a liquid stain.
Rinse and soak up the excess.
Seat belts
Special instructions for sweets or
These must be kept clean. chewing gum
Use products selected by our Technical
Department (Approved outlets) or Put an ice cube on the stain to solidify
warm, soapy water and a sponge and it, then proceed as for a solid stain.
wipe with a dry cloth.
Detergents or dyes must not be used
under any circumstances.
4.17
INTERIOR TRIM MAINTENANCE (2/2)
Removal/replacing removable You should not:
equipment originally fitted in Position objects such as deodorants,
the vehicle scents etc. near air vents as this could
If you need to remove equipment in damage your dashboard trim.
order to clean the passenger com-
partment (for example, mats), always
ensure that they are correctly refitted
and are the right way around (the driv-
er’s mat should be fitted on the driver’s Use high-pressure
side, etc.) and fit them with the compo- cleaning equipment or
nents supplied with the equipment (for sprays inside the pas-
example, the driver mat should always senger compartment:
be fixed using the pre-fitted mounting
components). without careful use, this equipment
could impair the correct functioning
With the vehicle stationary, always of the electrical or electronic compo-
ensure that nothing will impede driving nents in the vehicle, or have other
(anything obstructing the pedals, heel detrimental effects.
wedged by the mat etc.).
4.18
Section 5: Practical advice
If the emergency spare wheel has been stored for several years, have it
checked by your Dealer to ensure that it is safe to use.
Vehicle fitted with an emergency spare wheel that differs from the
other wheels:
– Never fit more than one emergency spare wheel to the same vehicle.
– As the punctured wheel is wider than the emergency spare wheel, the vehicle’s
ground clearance is reduced.
– Replace the emergency spare wheel as soon as possible with a wheel identi-
cal to the original one.
– When this is fitted to the vehicle, which must only be a temporary measure, the
driving speed must not exceed the speed indicated on the label on the wheel.
If the vehicle is parked on
the hard shoulder, you must – Fitting an emergency spare wheel may alter the way the vehicle usually runs.
warn other road users of Avoid sudden acceleration or deceleration and reduce your speed when cor-
your vehicle’s presence nering.
with a warning triangle or with other – If you need to use snow chains, fit the emergency spare wheel to the rear axle
devices as per the legislation apply- and check the tyre pressure.
ing to the country you are in.
5.2
PUNCTURE, EMERGENCY SPARE WHEEL (2/2)
To refit emergency spare wheel B
A Proceed in reverse order. Check that
wheel carrier 4 is correctly positioned
1 before tightening nuts 3 and 5.
4
5
2 3
B
5.3
TYRE PRESSURE KIT (1/3)
A tyre which has been punctured Keep the repair kit away from chil-
should always be inspected (and re- dren.
The kit repairs tyres when paired, where possible) as soon as Do not dispose of the empty bottle
tread A has been dam- possible by a specialist. in the countryside. Return it to your
aged by objects smaller When taking a tyre which has been approved dealer or to a recycling or-
than 4 mm. It cannot repair repaired using this kit to be replaced, ganisation.
all types of puncture, such as cuts you must inform the specialist. The bottle has a limited service
larger than 4 mm, or cuts in tyre life which is indicated on its label.
When driving, vibration may be felt
sidewall B. Check the expiry date.
due to the presence of the repair
Ensure also that the wheel rim is in product injected into the tyre. Contact an approved dealer to re-
good condition. place the inflation tube and repair
Do not pull out the foreign body product bottle.
causing the puncture if it is still in
the tyre.
5.4
TYRE PRESSURE KIT (2/3)
5.5
TYRE PRESSURE KIT (3/3)
– disconnect any accessories previ- Once the tyre is correctly inflated,
ously connected to the vehicle’s ac- remove the kit: slowly unscrew the in-
cessories sockets; flation adapter 1 to prevent any product
8 1 spatter and store the container in plas-
– adapter 2 must be connected to the
vehicle accessories socket; tic packaging to prevent product leaks.
– Affix the driving recommendation
2 – press switch 4 to inflate the tyre to label to the dashboard where it can
the recommended pressure (please easily be seen by the driver;
refer to the information on “Tyre infla- – Store the kit in the toolkit and re-
7 tion pressure” in Section 4); insert it properly under the driver’s
– after a maximum of 15 minutes, stop seat.
6 inflating and read the pressure (on – At the end of this initial inflation op-
5 3 pressure gauge 5). eration, air will still escape from the
4 Note: while the bottle is emptying tyre. You must drive a short distance
(approximately 30 seconds), the in order to seal the hole.
pressure gauge 5 will indicate briefly – Start immediately and drive at be-
With the engine running and the a pressure of up to 6 bars, then the tween 12 and 40 mph (20 and
parking brake applied, pressure drops. 60 km/h) in order to distribute the
– unroll the hose from the container; product evenly in the tyre and, after
– adjust the pressure: to increase driving for 2 miles (3 km), stop and
– connect the compressor hose 3 to it, continue inflation with the kit; to check the pressure.
the container’s inlet 8; reduce it, press button 6. – If the pressure is greater than 1.3 bar
– depending on the vehicle, connect If a minimum pressure of 1.8 bar is but less than the recommended
the container 8 to the compressor not reached after 15 minutes, repair pressure (refer to the label affixed to
from the container recess 7; is not possible; do not drive the ve- the edge of the driver’s door), read-
hicle but contact an approved dealer. just it. Otherwise, please contact an
– unscrew the valve cap on the rel- authorised dealer: the tyre cannot be
evant wheel and screw on the con- repaired.
tainer’s inflation adapter 1;
5.6
TOOLS (1/2)
4
Do not leave the tools un- 1
secured inside the vehicle
as they may come loose
under braking. After use, 8 5
check that all the tools are correctly 7
clipped into the tool kit, then position
it correctly in its housing: there is a 2 6
risk of injury.
The jack is designed for wheel The tools included in the tool kit depend Hubcap tool 5
changing purposes only. Under no on the vehicle. The tool kit 2 is located This tool is used to remove the wheel
circumstances should it be used for under the driver’s seat. To remove it, trims.
carrying out repairs underneath the move the seat forward and fold down
vehicle or to gain access to the un- the seatback (refer to the informa- Offset wrench 6.
derside of the vehicle. tion on the “Front seats” in Section 1).
Unscrew the mounting screw 1 from the Wheelbrace 7
unit and swivel to extract. This locks and unlocks the wheel bolts
and the emergency spare wheel holder.
Jack 3
Fold it correctly before refitting it in its Tow eye 8
Nothing should be placed housing (ensure that the wheelbrace is Please see “Towing: breakdown recov-
on the floor area in front of correctly positioned). ery” in Section 5.
the driver as such objects
may slide under the pedal Wheel bolt anti-theft piece 4.
during braking manoeuvres, thus
obstructing its use.
5.7
TOOLS (2/2)/TRIMS
9
A
10 5
11
B C
5 D 5
Trim 9 Trim 11
Remove the wheel trim using hubcap Remove using hubcap tool 5 (located in
tool 5 (located in the tool kit) by fit- the tool kit) by engaging the hook in the
ting the hook into one of the openings opening near the edge of the trim.
around the edge of the wheel trim. To refit, position the five trim attach-
To refit it, align it with valve 10. ments facing the five wheel attach-
Push the retaining hooks in fully, start- ments and press hard in the middle of
ing with side A near the valve, followed the trim to clip it to the wheel.
by B and C, finishing at D opposite the
valve.
5.8
CHANGING A WHEEL (1/2)
5.9
CHANGING A WHEEL (2/2)
Loosen the wheel nuts and remove the
wheel.
Fit the emergency spare wheel in place
on the central hub.
Tighten the nuts and lower the jack.
With the wheels on the ground, tighten
the nuts fully and check if they are tight
as quickly as possible.
Position the trim.
1 3
2
Remove the wheel trim (refer to the in- Insert the jack 2 horizontally; the jack
formation on “Wheel trims” in Section 5). head pin 3 should line up with the hole
Use the wheelbrace 1 to slacken off the in the lower part of the bodywork near-
wheel bolts. Position it so as to be able est the wheel concerned.
to push from above. Begin to crank the jack so that the base-
plate is correctly positioned (it should
be underneath the vehicle and aligned
with the jack head).
Anti-theft bolt
If you use anti-theft bolts, fit these
nearest the valve (otherwise it may
not be possible to fit the wheel trim).
5.10
TYRES (1/3)
The tyres are the only contact between When the tyre tread has been worn
the vehicle and the road, so it is essen- to the level of the warning strips, they
tial to keep them in good condition. become visible 2: it is then neces-
You must make sure that your tyres sary to replace your tyres because the
conform to local road traffic regulations. 2 tread rubber is now only 1.6 mm deep
at most, resulting in poor road hold-
ing on wet roads.
An overloaded vehicle, long journeys
by motorway, particularly in very hot
1 weather, or continual driving on poorly
surfaced minor roads will lead to more
rapid tyre wear and affect safety.
5.11
TYRES (2/3)
Tyre pressures Pressures should be checked when the Vehicle fitted with a tyre pressure
tyres are cold; ignore higher pressures loss warning system
Adhere to the tyre pressures (including which may be reached in hot weather
the emergency spare wheel). The tyre If underinflated (puncture, low pres-
or following a fast journey.
pressures should be checked at least
once a month and additionally before
If tyre pressures cannot be checked
when the tyres are cold, assume an in-
sure, etc.), the warning light
the instrument panel comes on, see
on
any long journey (refer to the label af- crease of 0.2 to 0.3 bar (or 3 PSI).
fixed to the edge of the driver’s door). “Tyre pressure loss warning system” in
Never deflate a hot tyre. Section 2.
5.12
TYRES (3/3)
Fitting new tyres Use in winter Studded tyres
This type of equipment may only be
Chains used for a limited period and as laid
For your safety, please re- For safety reasons, fitting snow down by local legislation.
spect the speed limit. chains to the rear axle is strictly for- It is necessary to observe the speed
When they need to be re- bidden. specified by current legislation.
placed, only tyres of the Chains cannot be fitted to tyres which These tyres must, at a minimum, be
same make, size, type and profile are larger than those originally fitted to fitted to the two front wheels.
should be used on a single axle. the vehicle.
They must: either have a load ca- Snow or Winter tyres
pacity and speed rating at least We recommend that these be fitted to
equal to those of the original all four wheels to ensure that your ve-
tyres, or conform to those recom- hicle retains maximum traction.
mended by an authorised dealer.
Warning: These tyres sometimes have
Failure to heed these instructions a specific direction of rotation and a
could endanger your safety and maximum speed index which may be
affect your vehicle’s roadworthi- lower than the maximum speed of your
ness. In all cases, we would recommend
vehicle. that you contact an approved Dealer
Risk of loss of control of the ve- who will be able to advise you on
hicle. the choice of equipment which is
most suitable for your vehicle.
5.13
FRONT HEADLIGHTS: replacing the bulbs (1/3)
5.14
FRONT HEADLIGHTS: replacing the bulbs (2/3)
C 2
5.15
HEADLIGHTS: changing bulbs (3/3)/SIDE LIGHTS
Additional lights
If you wish to fit fog lights or long range
headlights to your vehicle, consult an
approved dealer.
5
5.16
REAR LIGHTS: changing bulbs (1/4)
A
3
2
1
A 2 4
Rear light unit A Turn the light unit slightly and release it Direction indicator lights 3
to access the bulb holder 2. Pear-shaped, bayonet type PY 21W
Remove bolt 1.
Unclip the bulb holders by rotating them bulb.
a quarter of a turn. Side lights and brake lights 4
Unclip the bulbs by pressing them Pear-shaped, bayonet type P 21/5W
slightly and rotating them a quarter of bulb.
a turn.
5.17
REAR LIGHTS: changing bulbs (2/4)
B 6
5
7
5.18
REAR LIGHTS: changing bulbs (3/4)
High-level brake light on rear Remove the light sideways from the
hinged doors outside to access bulb 9.
Remove nuts 8. Pear-shaped, bayonet type P 21W
bulb.
5.19
REAR LIGHTS: changing bulbs (4/4)
10 12
11
12
High-mounted brake light on Remove the light from the outside to Number plate lights
tailgate access the bulb 11.
The bulb is accessed in the same way
Remove nuts 10. Pear-shaped, bayonet type P 21W for both vehicles with hinged doors and
bulb. those with the tailgate.
Unclip the light 12 (using a tool such as
a flat-blade screwdriver).
Remove the light cover to gain access
to the bulb.
Bulb type: W5W.
5.20
INTERIOR LIGHTING: changing bulbs (1/2)
1
2 3
1
1
5.21
INTERIOR LIGHTING: changing bulbs (2/2)
5.22
RADIO FREQUENCY REMOTE CONTROL: battery
5.23
RENAULT CARD: battery
2 A
B
4
1 3
Replacing the battery When refitting, proceed in the reverse Operating faults
When the message “KEYCARD order, then press one of the buttons on If the battery is too weak to ensure cor-
BATTERY LOW” appears on the instru- the card four times, close to the vehicle: rect operation, you can still start (insert
ment panel, replace the RENAULT card the next time the vehicle is started, the the RENAULT card in the card reader)
battery, press button 1 pulling on emer- message will disappear. and lock/unlock the vehicle (refer to the
gency key 2, then unclip the cover 3 Note: it is not advisable to touch the information on "Locking/unlocking the
using tab 4. electronic circuit or contacts on the doors" in Section 1).
Remove the battery by pressing on one RENAULT card when replacing the bat-
side (movement A) and by lifting the tery.
other (movement B) then replace it, en-
suring the polarity and model, shown
on cover 3 are respected.
Check that the cover is clipped shut.
Do not throw away your
used batteries; give them to
an organisation responsible
The batteries are available from approved Dealers, and their service life approxi- for collecting and recycling
mately two years. Check that there is no dye on the battery: risk of an incorrect batteries.
electrical contact.
5.24
BATTERY: breakdown recovery (1/2)
To avoid all risk of sparks:
– Ensure that any power consumers
(courtesy lights, etc.) are switched
off before disconnecting or recon-
necting a battery;
– when charging, stop the charger
Handle the battery with care before connecting or disconnecting
as it contains sulphuric acid, the battery;
which must not come into – do not place metal objects on the
contact with eyes or skin. If battery as this could create a short
it does, wash the affected area with circuit between the terminals;
plenty of cold water. If necessary, – always wait at least one minute after
consult a doctor. Before performing any the engine has been switched off
action in the engine com- before disconnecting a battery;
Ensure that naked flames, red hot
partment, the ignition must – make sure that you reconnect the
objects and sparks do not come into
be switched off (please see battery terminals after refitting.
contact with the battery as there is a
risk of explosion. the information on “Starting, stop-
ping the engine” in Section 2). Connecting a battery charger
Please note when working close to
the engine that it may be hot. In ad- The battery charger must be com-
dition, the engine cooling fan may patible with a battery with nominal
start at any moment. The
warning light in the engine compart-
Special procedures may be
required to charge some
voltage of 12 volts.
Do not disconnect the battery when the
ment reminds you of this. batteries. Contact your ap- engine is running. Follow the instruc-
proved dealer. tions given by the manufacturer of
Risk of injury. the battery charger you are using.
Avoid all risk of sparks which may
cause an immediate explosion, and
charge the battery in a well venti-
lated area. Risk of serious injury.
5.25
BATTERY: breakdown recovery (2/2)
Starting the vehicle using the
battery from another vehicle
If you have to use the battery from an-
other vehicle to start, obtain suitable 2
1
jump leads (with a large cross section) 2
from an approved dealer or, if you al-
ready have jump leads, ensure that
they are in perfect condition. A
The two batteries must have an iden- B 1
tical nominal voltage of 12 volts. The
battery supplying the current should
have a capacity (amp-hours, Ah) which
is at least the same as that of the dis- 4
charged battery. 3
Ensure that there is no risk of contact Depending on the vehicle, unclip the
between the two vehicles (risk of short battery cover.
circuiting when the positive terminals
are connected) and that the discharged Connect the positive cable A to the
battery is properly connected. Switch support on the (+) terminal 1, then to the
off your vehicle ignition. (+) terminal 4 of the battery supplying
the current.
Start the engine of the vehicle supply-
ing the current and run it at an interme- Connect the negative cable B to the (–)
diate engine speed. terminal 3 of the battery supplying the Check that there is no con-
current and then to the (–) terminal 2 of tact between leads A and B
the discharged battery. and that the positive lead A
is not touching any metal
Start the engine, and as soon as it starts parts on the vehicle supplying the
running, disconnect cables A and B in current.
reverse order ( 2 - 3 - 4 - 1 ).
Risk of injury and/or damage to
the vehicle.
5.26
FUSES (1/3)
5.27
FUSES (2/3)
Allocation of fuses
(the presence of certain fuse depends on the vehicle equipment level)
29 36
11 20
30 37
12 21
31 38
1 2 13 22
32 39
14 23
33 40
15 24
34 41
3 16 25
35 42
4 17 26
5 18 27
6 19 28
7 8 9 10 43 44 45
5.28
FUSES (3/3)
APC load for vehicle with Central locking of opening APC load for vehicle with
1 14 29
RENAULT card elements RENAULT card
Left-hand daytime running light,
2 Adjustment rear side light, left-hand main 30 General service
3 Adjustment 15
beam headlight, right-hand
+ battery for vehicles with dipped beam headlight Cigarette lighter, accessories
4 31
RENAULT card socket
Registration plate lighting, front
Additional heating and air 16
5 and rear fog lights 32 Heater
conditioning
Supplementary passenger Alarm, horn, lighting and wiper 33 Brake light, ABS, transponder
6 17
compartment heating stalks
Electric door mirrors, 34 Interior lighting, air-conditioning
18 Instrument panel
7 supplementary central unit Starting for vehicles with
adjustment 19 Heater 35
RENAULT card
8 Heated door mirror Rear screen wiper, screenwash 36 Rear windscreen wiper
20
Radio, multimedia, rear-view pump, horn
9 37 Electromagnetic notification
mirror, diagnostic socket 21 General APC load
Accessories socket in the
38
10 Pre-equipment, towbar socket 22 Reversing lights loading area
Driver’s side window control
Timed battery, passenger 23 Brake switch 39
11 motor
compartment unit 40 Rear accessories socket
24 Injection, starting
Right-hand daytime running 41 BCM starting
light, front side lights, right-hand 25 Airbag, steering column lock
12 42 Heated seats
main beam headlight, left-hand
dipped beam headlight 26 Passenger side window control 43 Tachograph
27 Power-assisted steering 44 Front windscreen wiper
Hazard warning lights, direction
13 28 Brake lights 45 Heating, air conditioning system
indicator lights
5.29
ACCESSORIES
5.30
WINDSCREEN WIPER BLADES (1/2)
3
Check the condition of the wiper
blades. You are responsible for their
service life: A
– clean the blades, windscreen and 4
rear screen regularly with soapy
water;
– do not use them when the wind-
1
screen or rear screen are dry;
2
– free them from the windscreen or
rear screen when they have not
been used for a long time.
5.31
WINDSCREEN WIPER BLADES (2/2)
8
C
B
9
5
6 7
5.32
TOWING: breakdown recovery (1/2)
The steering wheel must be un-
– Use a rigid towing bar. locked and the ignition key must be
If a rope or cable is used in position M (ignition on) to provide
(where the law allows this), brake lights and hazard warning
the vehicle being towed lights on the towed vehicle. At night
must be able to brake. the vehicle must have its lights on.
– A vehicle must not be towed if it is
not fit to be driven. Unhitch the trailer, etc., if one is
– Do not accelerate or brake sud- being towed.
denly when towing, as this may You must observe the towing regu-
result in damage being caused to lations which apply in the country in
the vehicle. which you are driving: do not exceed
– When towing a vehicle, do not the towing weight for your vehicle.
exceed 15 mph (25 km/h).
– Do not push the vehicle if the Contact an approved dealer.
steering column is locked. Never use the drive shafts or axles.
These towing points may only be used
for traction: never use them for lifting
the vehicle directly or indirectly.
5.33
TOWING: breakdown recovery (2/2)
4
2
6
3 5
5.34
FITTING A RADIO
5.35
OPERATING FAULTS (1/7)
The following advice will enable you to carry out quick, temporary repairs. For safety reasons you should always contact
an approved Dealer as soon as possible.
The RENAULT card does not lock or Card battery is flat. Replace the battery. You can still lock/
unlock the doors. unlock and start your vehicle (refer to the in-
formation on “Locking, unlocking the open-
ing elements” in Section 1 and “Starting,
stopping the engine” in Section 2).
Use of appliances operating on the Stop using the equipment or use the in-
same frequency as the card (mobile tegrated key (refer to the information on
phone, etc.). “Locking, unlocking the opening elements”
in Section 1).
Vehicle located in a high electromag- Use the key integrated in the card (refer to
netic radiation zone. the information on “Locking, unlocking the
Vehicle battery flat. opening elements” in Section 1).
The vehicle is started. With the engine running, the card’s locking/
unlocking device is blocked. Turn off the ig-
nition.
5.36
OPERATING FAULTS (2/7)
The following advice will enable you to carry out quick, temporary repairs. For safety reasons you should always contact
an approved dealer as soon as possible.
The remote control does not lock or The remote control battery is flat. Use the emergency key.
unlock the doors.
Use of appliances operating on the same Stop using the devices or use the key.
frequency as the remote control (mobile
phone, etc.).
Vehicle located in a high electromagnetic Replace the battery. You can still lock/
radiation zone. unlock and start your vehicle (refer to the
Discharged battery. information on “Locking/unlocking the
doors” in Section 1 and “Starting/Stopping
the engine” in Section 2).
The vehicle is started. With the engine running, the key’s locking/
unlocking device is blocked. Turn off the
ignition.
5.37
OPERATING FAULTS (3/7)
The starter is activated POSSIBLE CAUSES WHAT TO DO
The instrument panel indicator lights are Battery terminals not tight, Retighten or reconnect the terminals, or clean them if
weak or fail to light up and the starter battery terminals discon- they are oxidised.
does not turn. nected or oxidised.
Discharged battery or not Connect another battery to the faulty battery. Refer to
operational. information on “Battery: troubleshooting” in Section 5
or replace the battery if necessary.
Do not push the vehicle if the steering column is
locked.
The engine will not start. Starting conditions are not Please refer to the information on “Starting, stopping
fulfilled. the engine” in Section 2.
The RENAULT “hands-free” Insert the card in the card reader in order to start the
card does not work. engine.
Please refer to the information on “Starting, stopping
the engine” in Section 2.
The engine cannot be switched off. Card not detected. Insert the card in card reader.
The steering column remains locked. Steering wheel locked. Move the steering wheel while pressing the engine
start button (please refer to Section 2 “Starting, stop-
ping the engine”).
5.38
OPERATING FAULTS (4/7)
White smoke from the exhaust. In the diesel version, this is necessarily a Please refer to the information on “Special
fault. Smoke may be caused by particle features of diesel versions” in Section 2.
filter regeneration.
Smoke under the vehicle when This is not necessarily a fault. The smoke
starting the heating. may come from the heater.
If this happens, the smoke will gradually
disappear once the passenger compart-
ment temperature has reached the ap-
propriate level.
Smoke under the bonnet. Short-circuit or cooling system leak. Stop, switch off the ignition, stand away
from the vehicle and contact an approved
dealer.
while cornering or braking The level is too low. Top up the engine oil level (refer to the in-
formation on “Engine oil level: topping up,
filling” in Section 4).
is slow to go out or remains lit Loss of oil pressure. Stop the vehicle and contact an approved
under acceleration Dealer.
5.39
OPERATING FAULTS (5/7)
Steering becomes heavy. Assistance overheating. Drive carefully at reduced speed, be aware
Fault with the electric assistance of the level of force in the steering wheel
motor. needed to turn the wheels. Consult an ap-
proved dealer
Fault in the assistance system.
Vibrations. Tyres not inflated to correct pressures, Check the tyre pressures: if this is not the
incorrectly balanced or damaged. problem, have them checked by an ap-
proved Dealer.
The engine is overheating. The coolant Engine cooling fan not working. Stop the vehicle, switch off the engine and
temperature indicator is in the warning contact an approved dealer.
zone and warning light ® comes on.
Coolant boiling in the coolant reservoir. Mechanical fault: damaged cylinder Stop the engine.
head gasket. Contact an approved dealer.
Radiator: If there is a significant lack of coolant, remember that it must never be topped up using cold coolant while
the engine is very warm. After any procedure on the vehicle which has involved even partial draining of the cooling
system, it must be refilled with a new mixture prepared in the correct proportions. Reminder: only products approved
by our Technical Department may be used for this purpose.
5.40
OPERATING FAULTS (6/7)
Electrical equipment POSSIBLE CAUSES WHAT TO DO
The wipers do not work. Wiper blades stuck. Free the blades before using the wipers.
The wiper does not stop. Faulty electrical controls. Consult an approved dealer.
Direction indicators flashing more Blown bulb. See information on “Headlights: changing
quickly. bulbs” or “Rear and side lights: changing
bulbs”.
The direction indicators do not work. Faulty electrical circuit or control. Consult an approved dealer.
The lights do not come on or go off. Faulty electrical circuit or control. Consult an approved dealer.
5.41
OPERATING FAULTS (7/7)
Electrical equipment POSSIBLE CAUSES WHAT TO DO
Traces of condensation in the head- Traces of condensation may be a nat-
lights or rear lights. ural phenomenon caused by varia-
tions in temperature and humidity.
In this case, the traces will disappear
slowly once the lights are switched
on.
The front seat belt reminder light An object is stuck between the floor Remove all objects from underneath the
comes on when the seat belts are and the seat and is disrupting the op- front seats.
fastened. eration of the sensor.
5.42
Section 6: Technical specifications
A
1
2
3
4
5
10 6
A 9 7
8
6.2
ENGINE IDENTIFICATION PLATES
1 2
A
1 Engine type.
2 Engine suffix.
3 Engine number.
6.3
DIMENSIONS (in metres) (1/4)
Van version
Q
Z1
K
C A D E
B G
Z
H
Y1
6.4
DIMENSIONS (in metres) (2/4)
Complete vehicles without recent alterations
(1) Unladen
(2) Laden
6.5
DIMENSIONS (in metres) (3/4)
Combi version
Q
Z1
K
C A D E
B G
Z
H
Y1
J
F
6.6
DIMENSIONS (in metres) (4/4)
Complete vehicles without recent alterations
A 3.098 3.498
B 4.999 5.399
C 0.933
D 0.968
E 1.615
F 1.628
G 2.283
H(1) 1.963 → 1.970
J(1) 0.546 → 0.553
K(2) 0.160→ 0.161
Q 1.369
Y 1.370
Y1 1.391
Z 1.306
Z1 0.736 1.620 0.736 1.620 1.136 2.020
(1) Unladen
(2) Laden
6.7
ENGINE SPECIFICATIONS
Engine type
R9M
(see engine plate)
Spark plugs
–
6.8
WEIGHTS (in kg) (1/2)
The weights indicated for a basic vehicle without options: they vary depending on the your vehicle’s equipment. Contact
an approved Dealer.
Maximum permissible all-up weight (MMAC) Weights are indicated on the vehicle identification plate (refer to
Gross Train Weight (MTR) the information on “Vehicle identification plates” in Section 6)
Maximum permissible load on roof 200 (including carrying device) 150 (including carrying device)
6.9
WEIGHTS (in kg) (2/2)
The weights indicated for a basic vehicle without options: they vary depending on the your vehicle’s equipment. Contact
an approved Dealer.
Maximum permissible all-up weight (MMAC) Weights are indicated on the vehicle identification plate (refer to
Gross Train Weight (MTR) the information on “Vehicle identification plates” in Section 6)
6.10
REPLACEMENT PARTS AND REPAIRS
Original parts are based on strict specifications and are subject to highly-specialised tests. Therefore, they are of at least the same
level of quality as the parts fitted originally.
If you always fit genuine replacement parts to your vehicle, you will ensure that it performs well. Furthermore, repairs carried out
within the manufacturer’s Network using original parts are guaranteed according to the conditions set out on the reverse of the
repair order.
6.11
SERVICE SHEETS (1/6)
VIN: ..................................................................................
6.12
SERVICE SHEETS (2/6)
VIN: ..................................................................................
6.13
SERVICE SHEETS (3/6)
VIN: ..................................................................................
6.14
SERVICE SHEETS (4/6)
VIN: ..................................................................................
6.15
SERVICE SHEETS (5/6)
VIN: ..................................................................................
6.16
SERVICE SHEETS (6/6)
VIN: ..................................................................................
6.17
ANTICORROSION CHECK (1/5)
If the continuation of the warranty is subject to repair, it is indicated below.
VIN: ..........................................................
Date of repair:
Date of repair:
Date of repair:
6.18
ANTICORROSION CHECK (2/5)
If the continuation of the warranty is subject to repair, it is indicated below.
VIN: ..........................................................
Date of repair:
Date of repair:
Date of repair:
6.19
ANTICORROSION CHECK (3/5)
If the continuation of the warranty is subject to repair, it is indicated below.
VIN: ..........................................................
Date of repair:
Date of repair:
Date of repair:
6.20
ANTICORROSION CHECK (4/5)
If the continuation of the warranty is subject to repair, it is indicated below.
VIN: ..........................................................
Date of repair:
Date of repair:
Date of repair:
6.21
ANTICORROSION CHECK (5/5)
If the continuation of the warranty is subject to repair, it is indicated below.
VIN: ..........................................................
Date of repair:
Date of repair:
Date of repair:
6.22
ALPHABETICAL INDEX (1/5)
A bulbs
ABS ..............................................................1.86, 2.21 → 2.25 changing ..........................................................5.14 → 5.22
accessories........................................................................ 5.30
accessories socket ................................................. 3.31 – 3.32 C
additional methods of restraint .......................................... 1.43 catalytic converter.............................................................. 2.10
side protection ............................................................. 1.42 central door locking1.4 → 1.6, 1.13, 1.16 → 1.21, 1.23 → 1.27
to the front seat belts .......................................1.37 → 1.40 changing a bulb .....................................................5.14 → 5.22
to the rear seat belts .................................................... 1.41 changing a wheel...................................................... 5.9 – 5.10
changing gear .................................................................... 2.11
A child restraint/seat ....................1.44 – 1.45, 1.47 → 1.64, 1.77
additive (reagent)............................................... 1.116 → 1.119 child safety......1.15, 1.40, 1.44 – 1.45, 1.47 → 1.64, 1.77, 2.4,
3.16 – 3.17
A child seats..........................................1.44 – 1.45, 1.47 → 1.64
adjusting your driving position ..1.28 – 1.30, 1.32 → 1.36, 3.33 children ................................. 1.2, 1.7, 1.44 – 1.45, 3.16 – 3.17
advice on antipollution ....................................................... 2.16 children (safety) ................................................... 1.2, 1.7, 1.15
air bag.......................................1.37 → 1.40, 1.42 – 1.43, 1.84 cigar lighter ............................................................. 3.31 – 3.32
activating the front passenger air bags ........................ 1.79 cleaning:
deactivating the front passenger air bags .................... 1.77 inside the vehicle .............................................. 4.17 – 4.18
air conditioning ........................................................3.4 → 3.15 clock ..................................................................... 1.99 – 1.100
air vents ...................................................................... 3.2 – 3.3 closing the doors ........................................... 1.14 – 1.15, 1.27
anti-corrosion check ..............................................6.18 → 6.22 control instruments ..........................1.84 → 1.91, 1.99 – 1.100
anti-corrosion protection .................................................... 4.14 controls ..................................................................1.80 → 1.83
anti-lock braking system: ABS ...............................2.21 → 2.25 courtesy light ................................................3.19 → 3.21, 5.21
antipollution cruise control ................................................1.87, 2.29 → 2.32
advice .......................................................................... 2.16 cruise control-speed limiter....................................2.26 → 2.32
armrest:
front .............................................................................. 3.26 D
ashtray .................................................................... 3.31 – 3.32 dashboard..............................................................1.80 → 1.83
audible and visual signals................................................ 1.109 deadlocking the doors ................................................ 1.6, 1.13
demisting
B rear screen .........................................................3.8 → 3.11
battery................................................. 4.12 – 4.13, 5.25 – 5.26 windscreen ..................................................3.5, 3.8 → 3.11
troubleshooting ................................................. 5.25 – 5.26 dimensions ................................................................6.4 → 6.7
bonnet......................................................................... 4.2 – 4.3 dipstick................................................................................. 4.4
brake fluid ............................................................................ 4.8 display ...................................................................1.84 → 1.89
doors......................................................................1.18 → 1.21
7.1
ALPHABETICAL INDEX (2/5)
doors/tailgate .......................1.2 → 1.8, 1.13, 1.23 – 1.24, 1.27 F
driver’s position .....................................................1.80 → 1.87 filter
driving ............ 2.2 → 2.6, 2.10, 2.14, 2.18 → 2.33, 2.35 – 2.36 air filter ........................................................................... 4.9
driving position oil filter .................................................................. 4.5 – 4.6
settings ............................................................1.32 → 1.36 passenger compartment filter ........................................ 4.9
driving recommendations ......................................2.12 → 2.15 fitting a radio ...................................................................... 5.35
fittings ....................................................................3.22 → 3.30
E front seat adjustment .............................................. 1.29 – 1.30
ECO driving ...........................................................2.12 → 2.15 front seats
ECO mode ................................................................ 2.13, 3.10 adjustment ............................................... 1.28 – 1.30, 1.32
electric beam height adjustment ......................... 1.107 – 1.108 fuel
electric windows ..................................................... 3.16 – 3.17 advice on fuel economy ...................................2.12 → 2.15
electronic stability control: ESC .............................2.21 → 2.25 consumption ....................................................2.12 → 2.15
emergency brake assist.........................................2.21 → 2.25 filling .................................................... 1.84, 1.113 → 1.115
emergency braking ................................................2.21 → 2.25 grade ............................................................ 1.113 → 1.115
emergency key ........................................................... 1.7 – 1.8 fuel consumption ...................................................2.12 → 2.15
emergency spare wheel ............................................. 5.2 – 5.3 fuel filler cap ...................................................... 1.113 → 1.115
engine fuel level ................................................................1.84 → 1.88
technical specifications .................................................. 6.8 fuel tank
engine coolant ..................................................................... 4.7 capacity ...................................................................... 1.113
engine oil ...................................................................4.4 → 4.6 fuel tank capacity ............................................... 1.113 → 1.115
engine oil capacity ...................................................... 4.5 – 4.6 fuses ......................................................................5.27 → 5.29
engine oil level ...........................................................4.4 → 4.6
engine specifications .................................................... 6.3, 6.8 G
engine standby ..........................................................2.7 → 2.9 gear lever........................................................................... 2.11
engine start/stop button .............................................2.3 → 2.6 grip control ......................................................................... 2.24
environment ....................................................................... 2.17
ESC: electronic stability control ....................1.86, 2.21 → 2.25 H
external temperature ....................................................... 1.100 handbrake.......................................................................... 2.11
hazard warning lights signal ............................................ 1.109
F headlight beam adjustment ................................ 1.107 – 1.108
faults headrest.................................................................... 1.28, 3.33
operating faults ................................................5.36 → 5.42 heated seats ...................................................................... 1.29
heated windscreen ..................................................3.8 → 3.11
F heating and air conditioning system ....3.4 → 3.12, 3.14 – 3.15
filling with reagent .............................................. 1.116 → 1.119 heating system ........................................................3.4 → 3.13
7.2
ALPHABETICAL INDEX (3/5)
Hill Start Assist.......................................................2.21 → 2.25 instrument panel ........................................................ 1.103
horn ................................................................................. 1.109 interior ..........................................3.19 → 3.21, 5.21 – 5.22
horn: lights
flash ........................................................................... 1.109 adjustment .................................................... 1.107 – 1.108
hubcap tool ................................................................. 5.7 – 5.8 changing bulbs .................................................5.14 → 5.16
front ..................................................................5.14 → 5.16
I lights:
idle speed .......................................................................... 2.34 adjusting ....................................................... 1.107 – 1.108
ignition switch ...................................................................... 2.2 brake lights ......................................................5.17 → 5.20
indicator lights.................................................................... 5.20 dipped beam headlights ...............1.84, 1.103, 5.14 → 5.16
indicators ....................................................1.109, 5.14 → 5.20 direction indicators .......................1.84, 1.109, 5.14 → 5.17
indicators: fog lights .................................................. 1.84, 1.106, 5.17
direction indicators ..................................................... 1.109 hazard warning .......................................................... 1.109
instrument panel ..............................................1.84 → 1.91 main beam headlights .............................. 1.84, 1.103, 5.14
instrument panel ....................................................1.84 → 1.98 number plate lights ...................................................... 5.20
instrument panel messages...................................1.90 → 1.98 reversing lights ............................................................. 5.17
interior trim side lights ..............................................1.103, 5.14 → 5.17
maintenance ..................................................... 4.17 – 4.18 load permitted on the roof......................................... 6.9 – 6.10
Isofix ....................................................................... 1.47 – 1.48 locking the doors ........... 1.2 → 1.8, 1.13 → 1.17, 1.23 → 1.27
luggage compartment cover .............................................. 3.38
J luggage retaining net .............................................. 3.39 – 3.40
jack ............................................................................. 5.7 – 5.8
M
K maintenance ...................................................................... 2.16
keys ...........................................................................1.2 → 1.5 maintenance:
bodywork .........................................................4.14 → 4.16
L interior trim ........................................................ 4.17 – 4.18
levels .........................................................................4.7 → 4.9 mechanical ............................4.4, 4.12 – 4.13, 6.12 → 6.17
levels: map reading lights .................................................3.19 → 3.21
brake fluid ...................................................................... 4.8 methods of restraint in addition to the seat belts ...1.37 → 1.43
coolant ........................................................................... 4.7 multimedia equipment .............................................. 3.44, 5.35
windscreen washer reservoir ......................................... 4.9
lifting the vehicle N
changing a wheel ................................................ 5.9 – 5.10 navigation system .............................................................. 3.44
lighting:
exterior .........................................................1.103 → 1.109
7.3
ALPHABETICAL INDEX (4/5)
O reverse gear
oil change ................................................................... 4.5 – 4.6 selecting ....................................................................... 2.11
opening the doors ................................................... 1.14 – 1.15 reversing sensor ..................................................... 2.35 – 2.36
operating faults ................................ 1.84 → 1.87, 5.36 → 5.42 running in ............................................................................. 2.2
P S
paintwork seat belt pretensioners
maintenance ....................................................4.14 → 4.16 front seat belt ...................................................1.37 → 1.40
parking distance control.......................................... 2.35 – 2.36 seat belts ......................................................1.32 → 1.40, 1.43
power-assisted steering..................................................... 1.31 service sheets........................................................6.12 → 6.17
pretensioners .........................................................1.37 → 1.40 side protection devices ...................................................... 1.42
puncture...................................................5.2 – 5.3, 5.7 → 5.10 signals and lights ...............................................1.103 → 1.109
speakers
R location ........................................................................ 5.35
radio................................................................................... 3.44 special features of diesel versions..................................... 2.10
radio frequency remote control/key speed limiter .................................................1.87, 2.26 → 2.28
use ........................................................................ 1.4 – 1.5 starting the engine .....................................................2.2 → 2.9
steering wheel
R adjustment ................................................................... 1.31
reagent (tank) .................................................... 1.116 → 1.119 Stop & Start ......................................................1.87, 2.7 → 2.9
Stop & Start function..................................................2.7 → 2.9
R stopping the engine ...................................................2.3 → 2.6
rear bench seat......................................................3.34 → 3.37 storage compartment.............................................3.22 → 3.30
rear seats........................................................................... 1.34 storage compartments ...........................................3.22 → 3.30
functions ..........................................................3.34 → 3.37 sun visor ............................................................................ 3.18
rear view mirrors ................................................. 1.101 – 1.102 switching on the vehicle ignition .........................2.2, 2.4 → 2.6
remote control door locking
batteries ....................................................................... 5.23 T
remote control door locking unit ................................. 1.2 – 1.3 tailgate ...................................................................3.39 → 3.42
RENAULT ANTI-INTRUDER DEVICE (RAID) ................... 1.27 tanks and reservoirs
RENAULT card brake fluid ...................................................................... 4.8
battery .......................................................................... 5.24 coolant ........................................................................... 4.7
use ................................................... 1.7 → 1.13, 2.4 → 2.6 tanks and reservoirs:
RENAULT card battery ...................................................... 5.24 windscreen washer ........................................................ 4.9
replacement parts .............................................................. 6.11 technical specifications ............................................6.4 → 6.11
telephone ........................................................................... 3.44
7.4
ALPHABETICAL INDEX (5/5)
temperature regulation ............................................3.8 → 3.13 weights ..................................................................... 6.9 – 6.10
tool kit ......................................................................... 5.7 – 5.8 wheel trim ............................................................................ 5.8
towing wheelbrace ................................................................. 5.7 – 5.8
driving .......................................................................... 2.23 wheels (safety) ......................................................5.11 → 5.13
breakdown ........................................................ 5.33 – 5.34 windscreen de-icing/demisting ................................3.8 → 3.11
towing equipment ......................................................... 3.43 windscreen washer ............................................ 1.110 → 1.112
towing a caravan ............................................. 3.43, 6.9 – 6.10 wiper blades ........................................................... 5.31 – 5.32
towing equipment wipers ................................................................ 1.110 → 1.112
fitting ............................................................................ 3.43 blades ............................................................... 5.31 – 5.32
towing hitch............................................. 5.7 – 5.8, 5.33 – 5.34
towing rings ...........................................................3.39 → 3.42
towing weights .......................................................... 6.9 – 6.10
traction control .......................................................2.21 → 2.25
transporting children .................1.44 – 1.45, 1.47 → 1.64, 1.77
transporting objects
in the luggage compartment ............................3.39 → 3.42
on the roof ........................................................... 6.9 – 6.10
trip computer and warning system... 1.84 → 1.87, 1.90 → 1.98
tyre inflation kit...........................................................5.4 → 5.6
tyre pressure.............................2.18 → 2.20, 4.10 – 4.11, 5.12
tyre pressure loss warning.....................................2.18 → 2.20
tyre pressures ......................................................... 4.10 – 4.11
tyres ............................. 2.18 → 2.20, 4.10 – 4.11, 5.11 → 5.13
U
unlocking the doors ...............................................1.23 → 1.26
use in winter ...................................................................... 5.13
V
variable power-assisted steering ....................................... 1.31
vehicle identification plates ......................................... 6.2 – 6.3
ventilation ................................................................3.2 → 3.15
W
warning lights.........................................................1.84 → 1.98
washing .................................................................4.14 → 4.16
7.5
7.6
RENAULT S.A.S. SOCIÉTÉ PAR ACTIONS SIMPLIFIÉE AU CAPITAL DE 533 941 113 € / 13-15, QUAI LE GALLO
92100 BOULOGNE-BILLANCOURT R.C.S. NANTERRE 780 129 987 — SIRET 780 129 987 03591 / TÉL. : 0810 40 50 60
NU 1120-10 – 99 91 002 81S – 03/2018 – Edition anglaise
à999100281Síîíä PG