MSDS Explanation For Luricion
MSDS Explanation For Luricion
MSDS Explanation For Luricion
LUBRICON A-112
Product & Company Information
Use of product: Dissolves the size of hydrocarbon molecules in fuel (Heavy oil, diesel,
gasoline or bio-diesel) and changes the molecular structure to finely
dispersed particles. Thus the oxygen molecules can be easier to react with
the converted fuel molecules and burn more completely in the fuel
combustion process. Furthermore, as results to increase the fuel efficiency
and reduce the emission of un-burn or partially burnt molecules from the
engine exhausts.
Ingredient Information
Hazards Identification
Contact with skin: Wash exposed area with soap and water and rinse well.
Contact with eyes: Flush with plenty of water. Get medical attention if irritation persists.
Inhalation: Remove to fresh air. Obtain medical attention if irritation persists.
Ingestion: If victim is conscious, give two glasses of water to drink. Call a physician.
Do not give anything by mouth to an unconscious person.
Conditions of Requires source of ignition, presence of air and a temperature greater than
flammability: the flashpoint.
Means of extinction: Use carbon dioxide, water fog, alcohol foam, dry chemical (preferred).
Normal fire fighting procedures may be used.
Hazardous combustion Combustion can produce carbon monoxide and dioxides. Exposing product
products: to intense heat could cause drums to rupture.
In case of spills or leaks: Clean up spills promptly. Surface can be slippery. Treat as an oil spill. For
small spills, absorb on inert material (clay, sand, dirt, etc). For large spills,
contain approved container. Observe recommended control measures.
Personal protective Protective gloves and safety glasses.
equipment to be used:
1/3
Handling, Storage and Transportation Information
Respiratory protection: Avoid prolonged or frequent contact with handling material. Avoid
breathing mists or vapour. Handle only in adequately ventilated areas.
Protective gloves: Rubber or neoprene
Eye protection: Safety glasses
Additional protective Overall and apron
equipment:
Ventilation: Adequate ventilation to reduce mists below permissible exposure limits
recommended.
Toxicological Information
Disposal Considerations
2/3
Transport Information
Regulatory Information
(F) Flammable
(Xn) Harmful
Disclaimer: All information appearing herein is based upon data obtained from manufacturer and/or recognized
technical sources. While the information is believed to be accurate, we make no representations as to its accuracy
or sufficiency. Conditions of use are beyond our control, therefore users are responsible for verifying the data
under their own operating conditions to determine whether the product is suitable for their particular purposes and
they assume all risks of their use, handling, and disposal of the product. Users also assume all risks in regards to
the publications of use of, or reliance upon, information contained herein. This information relates only to the
product designated herein, and does not relate to its use in combination with any other material or process.
3/3