Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    Shanmugha Precision Forging Non - Conformance Report: de Burring Rework Cost 250

    Uploaded by

    Ravichandran D
    This non-conformance report documents issues found with parts received from Jayam Engineering Tools. Of the 83 parts received, all failed inspection with dimensions outside the allowed tolerance of 0.684 +/-0.005 and burrs around milled surfaces. The parts will require de-burring rework at a cost of 250 rupees per part before acceptance.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Shanmugha Precision Forging Non - Conformance Report: de Burring Rework Cost 250

    Uploaded by

    Ravichandran D
    22 views2 pages
    This non-conformance report documents issues found with parts received from Jayam Engineering Tools. Of the 83 parts received, all failed inspection with dimensions outside the allowed tolerance of 0.684 +/-0.005 and burrs around milled surfaces. The parts will require de-burring rework at a cost of 250 rupees per part before acceptance.

    Original Title

    NCR_E10_19

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This non-conformance report documents issues found with parts received from Jayam Engineering Tools. Of the 83 parts received, all failed inspection with dimensions outside the allowed tolerance of 0.684 +/-0.005 and burrs around milled surfaces. The parts will require de-burring rework at a cost of 250 rupees per part before acceptance.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    22 views2 pages

    Shanmugha Precision Forging Non - Conformance Report: de Burring Rework Cost 250

    Uploaded by

    Ravichandran D
    This non-conformance report documents issues found with parts received from Jayam Engineering Tools. Of the 83 parts received, all failed inspection with dimensions outside the allowed tolerance of 0.684 +/-0.005 and burrs around milled surfaces. The parts will require de-burring rework at a cost of 250 rupees per part before acceptance.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 2

    SHANMUGHA PRECISION FORGING

    NON - CONFORMANCE REPORT


    NCR No.: NCR/E10/ 19 Date: 15 -05-2010

    Stage: Incoming / Inprocess / Final / Customer Complaint

    Supplier Name : Supplier DC No : 15 Dt.8.05.2010 &


    Jayam Engineering Tools 21 Dt. 10.05.2010
    GRIN : 143 Dt.10.05.2010 & 165
    Dt. 14.05.2010
    Part No./Rev: A02-PC4 /- Part Name :3 1/4" Bore Cap Fixed
    Clevis A-Series Cylinder

    Total Qty. : 64 + 19 Nos = 83 Nos. Sample Qty : 25 Nos


    SL. No. Feature Inspected Non-Conformance Identified

    1 0.684 +/-0.005 (2x) 0.646 - 0.650 - All


    2 Visual Burr around Milled Surfaces - All

    Root Cause :

    Action Plan Target Date

    Disposition Action : De Burring Rework Cost = 250/-

    Quorantined
    Accepted Rejected Rework Concession
    (Hold)

    Prepared by: Approved by :

    Name: Shivakumar Name: Sundar.D

    Form No:NCR/01/R0

    You might also like