Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    Artison PEBB Test Results

    Uploaded by

    ratnatejreddy
    The certificate of analysis summarizes the results of mechanical tests conducted on 6 samples of processed engineered bamboo boards. The document lists 7 mechanical characteristics that were tested such as density, block shear strength, screw withdrawal test, modulus of rupture, modulus of elasticity, compressive strength, and water resistance. It provides the unit of measurement and results for each characteristic tested and references the corresponding Indian Standard test method.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Artison PEBB Test Results

    Uploaded by

    ratnatejreddy
    9 views3 pages
    The certificate of analysis summarizes the results of mechanical tests conducted on 6 samples of processed engineered bamboo boards. The document lists 7 mechanical characteristics that were tested such as density, block shear strength, screw withdrawal test, modulus of rupture, modulus of elasticity, compressive strength, and water resistance. It provides the unit of measurement and results for each characteristic tested and references the corresponding Indian Standard test method.

    Original Description:

    Original Title

    Artison PEBB Test Results (3)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The certificate of analysis summarizes the results of mechanical tests conducted on 6 samples of processed engineered bamboo boards. The document lists 7 mechanical characteristics that were tested such as density, block shear strength, screw withdrawal test, modulus of rupture, modulus of elasticity, compressive strength, and water resistance. It provides the unit of measurement and results for each characteristic tested and references the corresponding Indian Standard test method.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views3 pages

    Artison PEBB Test Results

    Uploaded by

    ratnatejreddy
    The certificate of analysis summarizes the results of mechanical tests conducted on 6 samples of processed engineered bamboo boards. The document lists 7 mechanical characteristics that were tested such as density, block shear strength, screw withdrawal test, modulus of rupture, modulus of elasticity, compressive strength, and water resistance. It provides the unit of measurement and results for each characteristic tested and references the corresponding Indian Standard test method.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    CERTIFICATE OF ANALYSIS

    Issued from:
    Choksi Laboratories Limited (Building - 3 "Eiffel")
    Survey No. 9/1, Balaji Tulsiyana Industrial Estate,
    Kumedi, Off. M.R. 10 Toll Naka,
    Indore - 452010 (M.P.) INDIA

    Issued to: ARTISON AGROTECH PVT. LIMITED, INDORE CoA ID: 04800008/22-23
    SKYLARK BUILDING, 3rd & 4TH FLOOR, PLOT NO-2, Report No.: 04800008/22-23 (v1)
    BICHOLI MARDANA Issue date: 13-08-2022
    Indore, Madhya Pradesh Customer Ref(s): N/M
    India - 452016 Customer ID: AA210058
    Sample Name: PROCESSED ENGINEERED BAMBOO Sample Quantity: 6 NOS.
    BOARDS (PEBB) Sealed / Unsealed: Unsealed
    Manufacture License No:N/M Packing: OPEN
    Manufacturer Name: N/M Analysis Start Date: 01-08-2022
    Manufacturing Date: N/M Analysis End Date: 13-08-2022
    Reference of Letter: N/M Sampling Date: N/M
    Date of Letter: N/M Sampled By: Client
    Date of Receipt: 01-08-2022 Sampling Location: N/M
    Batch Number: N/M Page Number: 1 of 1
    Batch Size: N/M
    Expiry / Retest Date: N/M

    Sr.No. Characteristics Unit Result Reference Method


    Mechanical Parameters
    1. Density g/cm3 0.73 IS : 1734 (part 1 to 20)-1983
    2. Block Shear Strength Kg/cm² 67.4 IS : 2380 (Part 9)-1977
    3. Screw Withdrawal Test N 2110 IS : 2380 (Part 14) - 1977
    4. Modulus of Rupture N/mm² 52.2 IS : 1734 (part 1 to 20)-1983
    5. Modulus of Elasticity N/mm² 11256.4 IS : 1734 (part 1 to 20)-1983
    6. Compressive Strength N/mm² 75.6 IS : 1734 (part 1 to 20)-1983
    7. Water Resistance Test Not Applicable Passes the test IS 1734-1983

    [ End of Report ]

    Remarks:
    1. Sample not drawn by CLL representative and sample information as furnished by customer.
    2. Test report shall not be reproduced either in part or in full, without written approval of CLL Management.
    3. CLL does not give any opinion or interpretation of the same.

    IDR00756 IDR00854
    13-08-2022 11:24:01 13-08-2022 11:35:05

    Authorised Signatory QA Approver

    This document is electronically generated & does not require any signature.
    IMPORTANT INFORMATION FOR CERTIFICATE OF ANALYSIS (CoA) / CERTIFICATE OF CALIBRATION (CoC):

    1. Sample(s) / Instruments are drawn and submitted by the client unless otherwise stated.
    2. This certificate refers only the particular item and reported parameters submitted for calibration / analysis.
    3. The results reported in this certificate are valid for the sample / instrument received as is and at the time of and under the
    stipulated conditions of measurement.
    4. This certificate is for the customer's information only, and can neither be used in part nor in full, in any media or court of
    law, without prior written permission of CLL.
    5. Endorsement of products is neither inferred nor implied.
    6. In case of any dispute, Indore jurisdiction is applicable.
    7. Perishable samples will be destroyed after testing; toxic / hazardous samples will be returned to the customer or shall be
    forwarded for incineration.
    8. Total Liability of CLL is limited to the invoiced amount.
    9. In the event, no zone is mentioned, CoA/CoC must be considered for Domestic (India) only

    CLL LABS - APPROVALS / ACCREDITATIONS BY:

    Note: Each CLL lab has different approvals / accreditations. Please check with the on-site BD cell for any specific
    registrations / submissions prior to sending test request. Your test request must mention the purpose / regulatory
    body / agency for which the testing is to be carried out.

    CLL’s SERVICE AREAS

    Food & Beverages Testing Services


    Agro Products (Food Raw Materials & Products, Milk & Milk Products, Agrochemicals, Fertilizers, Food Additives)

    Drugs and Chemicals Testing Services:


    Pharmaceuticals, Herbals, Cosmetics, Ayurvedic - Raw Materials, Formulations & Chemicals Analysis

    Building Materials Testing Services:


    Metals, Sand/Aggregate, Bricks, Paving Block, Cement, Paints, Minerals, PVC/HDPE Pipes, Packaging Materials & Wood Products, On-
    site inspection services for soil and constructions sites.

    Water & Waste Water:


    Drinking Water (IS:10500), Purified water for pharmaceutical use, Recreational Water, EPA / WHO Water, Water for Injections, Water
    for food processing, Water for dialysis etc.

    Calibration Services:
    Thermal, Mechanical (Mass, Volume, Speed, Pressure, Vacuum), Area / Autoclave / Steam tunnel Mapping, Electro-technical,
    Dimension, etc.

    Other Testing, Research & Validation services:


    Toys testing, Disinfectants / Sanitizers testing, Consumer products (such as Water purifiers, Sterilizers etc.), Soil investigation &
    analysis, Waste / Used oil for recycling / incineration,etc.

    Environment Services:
    Indoor and Outdoor Monitoring for workplaces / hotels / hospitals / homes etc., Industrial monitoring – ambient and stack, River/Lake
    water quality survey.

    This document is electronically generated & does not require any signature. Page | A
    CLL’s LAB LOCATIONS

    Indore Laboratory
    (Corporate Office & Center of Excellence)

    Survey No. 9/1, Balaji Tulsiyana Industrial Estate, Kumedi, Off MR10 Toll Plaza, Indore (M.P.) - 452010
    Tel: +91-731-3501112 (60 lines)
    E-mail : bd@choksilab.com
    CLL Baroda Laboratory CLL Panchkula Laboratory

    829 GIDC, Makarpura Baroda – 390010 Plot No. 362, Industrial Area, Phase –II,
    Panchkula – 734 112 (Haryana)
    Tel: +91-265-2978001 Tel: +91-172-5048600 / 01 / 02
    E-mail : baroda@choksilab.com E-mail : panchkula@choksilab.com
    CLL Vapi Laboratory CLL Goa Laboratory

    32, Vibrant Business Park, Opp. UPL, N.H. - 48, C-18, C-20 Verna Industrial Estate, Phase – 1A,
    Vapi, Gujarat, India 396195 Verna – 403722, Goa (India)
    Tel: +91-260-2433488, 2432715, 2432731 Tel: +91-838-0033301 / 02 / 03 / 04
    E-mail : vapi@choksilab.com E-mail : goa@choksilab.com

    This document is electronically generated & does not require any signature. Page | B

    You might also like