Encoder Pouch845t-In003 - En-P
Encoder Pouch845t-In003 - En-P
Encoder Pouch845t-In003 - En-P
Shaft Size 6mm, 10mm, 6.4mm [1/4in], 9.517mm [3/8in] diameter Differential Encoder Buffer Board 845--BB
*See Sensor catalog for selection.
Environmental
Housing NEMA Type 4, IP66 (IEC 529)
1
Selection Guide
845T — D Z 1 3 E CR — C
a b c d e f g
a e f
Mounting Configuration Connection Options Resolution
Code Description Code Description (PPR)
Code Description
A 6 Pin Connector AG 1
D Square Flange
B 7 Pin Connector AM 5
Servo with
H E 10 Pin Connector BG 10
Face Mount Holes
Servo without P Pigtail Cable CA 50
L This option not available with
Face Mount Holes CB 60
Electrical Option codes: “1,” “4,” “5”
or “6.” CE 64
b CF 80
Shaft Options g CG 100
Code Description Mating Connector/Cable DB 120
A 6mm Diameter Length DF 150
B 10mm Diameter Code Description EB 180
C 1/4in Diameter Blank Without Mating Connector CH 200
Z 3/8in Diameter C With Mating Connector CJ 250
K 6mm w/Flat 1 1m (3.28ft) Cable Length CC 254
L 10mm w/Flat 5 5m (16.4ft) Cable Length CW 256
M 1/4in w/Flat 9 9m (29.52ft) Cable Length EG 300
N 3/8in w/Flat These options not available with Connection CK 360
Options code: “P.”
These options not available with Connection CL 400
c Options code: “A,” “B,” & “E.”
CM 500
Electrical Options DW 512
Code Description EH 600
5V DC in, 5V DC DG 720
1
DLD Out
DL 800
5V DC in, 5V DC
2 LG 900
P--P Out
CN 1000
11--24V DC in,
3
11--24V DC P--P Out FW 1024
11--20V DC in, EL 1200
4
5V DC DLD Out
CD 1250
24V DC in, RF 1280
5
5V DC DLD Out
CU 1472
11--24V DC in,
6 EM 1500
11--24V DC DLD out
DLD = Differential Line Driver FL 1600
P--P = Push-Pull Single Ended Driver CP 1800
DN 2000
d CS 2048
Signal Options HL 2400
Code Description
CR 2500
1 Channel A Only
CY 2540
2 Channel A and B
LJ 2750
3 Channel A, B, and Z
EN 3000
2
Electrical Connections Push-Pull Single End Driver Output
Differential Line Driver Output 1 Cycle
Channel B*
Channel B*
Channel B*
(Index) Channel Z*
3
Dimensions—mm (inches)
A
A
47.1
(1.85) Max 47.1 (1.85)
Max.
19 (0.75) 19 (0.75)
7.6 (0.300)
2.54 (0.100)
3.02 (0.12) 3.0 (0.12)
B B
31.72 (1.249) Dia.
47 (1.85) Dia. 31.72 (1.249) Dia.
26.2 (1.03)
22
(0.875)
M4 x 5mm Deep on a
Face Mount Holes 42mm Bolt Circle, 3
Optional Places—120° Apart 3.96 (0.156) Dia.
4 Mtg. Holes
44.5
(1.75)
22 (0.875)
Flat Dimensions
Code Dimension “A”
K 5.3mm (0.21in) 18.3 19.05
(0.72) (0.75)
L 9.1mm (0.36in)
9.1
(0.36) A
M 5.5mm (0.22in)
3/8I Dia. Double Flat Shaft with Flat Option
N 8.6mm (0.34in) Shaft
Publication 75008--187--01(A)
November 2003
Printed in USA
4