Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 63 views

    Ancla Mecanica Dyl

    Uploaded by

    jose guzman
    The TM Anchor/Catcher is a retrievable mechanical packer tool that holds tubing strings in tension or compression during pumping to prevent buckling and reduce wear. It has stainless steel drag springs and enclosed slips for safety. If it cannot be released with rotation, it has a shear release activated by an upward pull. It is available in various casing sizes from 4-1/2" to 9-5/8" with recommended hole sizes and dimensions listed.

    Copyright:

    © All Rights Reserved

    Ancla Mecanica Dyl

    Uploaded by

    jose guzman
    63 views1 page
    The TM Anchor/Catcher is a retrievable mechanical packer tool that holds tubing strings in tension or compression during pumping to prevent buckling and reduce wear. It has stainless steel drag springs and enclosed slips for safety. If it cannot be released with rotation, it has a shear release activated by an upward pull. It is available in various casing sizes from 4-1/2" to 9-5/8" with recommended hole sizes and dimensions listed.

    Original Description:

    descripcion ancla mecanica d&l

    Copyright

    © © All Rights Reserved

    Did you find this document useful?

    Is this content inappropriate?

    The TM Anchor/Catcher is a retrievable mechanical packer tool that holds tubing strings in tension or compression during pumping to prevent buckling and reduce wear. It has stainless steel drag springs and enclosed slips for safety. If it cannot be released with rotation, it has a shear release activated by an upward pull. It is available in various casing sizes from 4-1/2" to 9-5/8" with recommended hole sizes and dimensions listed.

    Copyright:

    © All Rights Reserved
    63 views1 page

    Ancla Mecanica Dyl

    Uploaded by

    jose guzman
    The TM Anchor/Catcher is a retrievable mechanical packer tool that holds tubing strings in tension or compression during pumping to prevent buckling and reduce wear. It has stainless steel drag springs and enclosed slips for safety. If it cannot be released with rotation, it has a shear release activated by an upward pull. It is available in various casing sizes from 4-1/2" to 9-5/8" with recommended hole sizes and dimensions listed.

    Copyright:

    © All Rights Reserved
    You are on page 1of 1

    We Know Downhole. (800) 441-3504 www.dloiltools.

    com

    TM ANCHOR/CATCHER
    Mechanical Set Packers

    The TM Anchor/Catcher is a retrievable


    positive action anchor tool to hold tubing
    Special Features
    strings in tension or compression during >>Stainless steel drag springs
    pump strokes to prevent tubing buckling. >>Enclosed slips
    This increases pumping efficiency while >>Rotation or shear release
    reducing rod and tubing wear. This tool
    also catches the tubing should it part. >>Safety release value easily adjusted
    Stainless steel drag springs employ
    low stress value to minimize failure
    under corrosive conditions. If the TM
    Anchor/Catcher cannot be released with
    right-hand rotation, it is equipped with a
    shear release activated by an upward pull.

    Product Specifications
    Casing Recommended Tool OD Tool ID Thread Connections Part
    Size Weight Hole Size (inches) (inches) Box Up / Pin Down Number
    (inches) (lbs/ft) (inches)

    9.5 - 13.5 3.920 - 4.090 3.750 2.00 2-3/8 EUE 32045


    4-1/2
    13.5 - 15.1 3.826 - 3.920 3.656 2.00 2-3/8 EUE 32044

    2.00 2-3/8 EUE 32055


    5-1/2 13.0 - 23.0 4.670 - 5.044 4.500
    2.38 2-7/8 EUE 32056

    2.50 2-7/8 EUE 32065


    6-5/8 20.0 - 32.0 5.675 - 6.049 5.500
    3.00 3-1/2 EUE 32066

    2.00 2-3/8 EUE 32071

    7 17.0 - 32.0 6.094 - 6.538 5.875 2.50 2-7/8 EUE 32070

    3.00 3-1/2 EUE 32073

    7-5/8 24.0 - 39.0 6.625 - 7.025 6.400 2.50 2-7/8 EUE 32075

    3.00 3-1/2 EUE 32095-BAE


    9-5/8 32.3 - 53.5 8.535 - 9.001 8.250
    4.00 4-1/2 EUE 32095

    NOTE: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.

    18 D&L OIL TOOLS Product Catalog Made in the U.S.A. Rev. 2/16 #320

    You might also like