EDrive Actuators VecTac VT Brochure
EDrive Actuators VecTac VT Brochure
EDrive Actuators VecTac VT Brochure
ELECTROMATE
Toll Free Phone (877) SERVO98 TM
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Versatile Thrust
Ball Screw
Linear
Actuators
VT204-06 400 16 6 2.25 0.50 0.50 1,920 35 1,070 850 3.5 9.0 7.0
VT204-12 400 16 12 2.25 0.50 0.50 1,920 35 1,070 850 3.5 12.0 10.0
VT204-18 400 16 18 2.25 0.50 0.50 1,920 35 1,070 850 3.5 15.0 13.0
VT204-24 400 16 24 2.25 0.50 0.50 1,920 35 1,070 850 3.5 18.0 16.0
VT209-06 900 9 6 2.25 0.20 0.63 2,700 32 1,070 850 3.5 9.0 7.0
VT209-12 900 9 12 2.25 0.20 0.63 2,700 32 1,070 850 3.5 12.0 10.0
VT209-18 900 9 18 2.25 0.20 0.63 2,700 32 1,070 850 3.5 15.0 13.0
VT209-24 900 9 24 2.25 0.20 0.63 2,700 32 1,070 850 3.5 18.0 16.0
VT305-06 500 40 6 3.25 1.00 1.00 2,400 88 2,300 2,300 4.5 24.0 19.8
VT305-12 500 40 12 3.25 1.00 1.00 2,400 88 2,300 2,300 4.5 28.4 24.2
VT305-18 500 40 18 3.25 1.00 1.00 2,400 88 2,300 2,300 4.5 32.8 28.6
VT305-24 500 40 24 3.25 1.00 1.00 2,400 88 2,300 2,300 4.5 37.2 33.0
VT305-30 500 40 30 3.25 1.00 1.00 2,400 88 2,300 2,300 4.5 41.6 37.4
VT310-06 1,000 20 6 3.25 0.50 1.00 2,400 88 5,350 4,250 4.5 24.0 19.8
VT310-12 1,000 20 12 3.25 0.50 1.00 2,400 88 5,350 4,250 4.5 28.4 24.2
VT310-18 1,000 20 18 3.25 0.50 1.00 2,400 88 5,350 4,250 4.5 32.8 28.6
VT310-24 1,000 20 24 3.25 0.50 1.00 2,400 88 5,350 4,250 4.5 37.2 33.0
VT310-30 1,000 20 30 3.25 0.50 1.00 2,400 88 5,350 4,250 4.5 41.6 37.4
VT320-06 2,000 10 6 3.25 0.25 1.00 2,400 88 5,475 3,450 4.5 24.0 19.8
VT320-12 2,000 10 12 3.25 0.25 1.00 2,400 88 5,475 3,450 4.5 28.4 24.2
VT320-18 2,000 10 18 3.25 0.25 1.00 2,400 88 5,475 3,450 4.5 32.8 28.6
VT320-24 2,000 10 24 3.25 0.25 1.00 2,400 88 5,475 3,450 4.5 37.2 33.0
VT320-30 2,000 10 30 3.25 0.25 1.00 2,400 88 5,475 3,450 4.5 41.6 37.4
(1) Intermediate lengths are available. (2) Lead accuracy is 0.003 in/ft; Backlash is 0.004 in max.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
VT320 3
F= L1(F1)3 +L2(F2)3 +L3(F3)3 +L4(F4)3 +.......Ln(Fn)3
1 L
VT204/VT209 Where: Fn is the calculated force for segment "n" with travel
length of Ln and total travel L.
0 Find the intersection of this value and the appropriate curve.
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
The value on the scale to the left reflects the B10 life of the
actuator.
Equivalent Load (lb)
General Dimensions
U-Parallel Offset Motor Configuration Rear Clevis Dimensions
+ .004
+ .002
+ .025
+ .015
ELECTROMATE
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Rod End Options
+ .000 + .000
- .005 - .010
How To Order:
Base Number Options Special
V T
Frame Size (in): Standard
2,3
Stroke Gearbelt
Reduction: Custom
Capacity (lb): x100 Length (in): 00- Direct Coupled Length (in):
Unit Mounting Option: 10- 1:1 00.00
MB Bottom Mount 20- 2:1
FF Front Flange N.C. Switch Qty:
Motor Position
MF Foot Mount 0, 1, 2, 3, etc.
1, 2, 3, 4
TF Front Trunnion 0 = Inline
TR Rear Trunnion (refer to figure)
CR Rear Clevis N.O. Switch Qty:
0, 1, 2, 3, etc.
End Effector/Rod End:
E Female Eye
F Female Thread 1 Switch Type:
A Self-Aligning Coupler Configuration: A - Hall Sourcing PNP
4 2
M Male Thread L- In-Line B - Hall Sinking NPN
S Spherical Rod Eye U- Parallel Offset 3 C - Reed
The products shown in this catalog are intended for industrial use only and should not be used to lift,
support or otherwise transport people, unless written authorization is obtained. The information For Application Support 800-878-1157
DRIVE provided in this catalog is believed to be accurate and reliable. However, EDRIVE assumes no
responsibility for its use or for any errors that may appear in this document. This information in this
publication is subject to change without notice.
Call us Today at Fax: 860-953-0496
Tel: 860-953-0588
A C T U AT O R S
Web www.edriveactuators.com Email info@edriveactuators.com 120 Vanderbilt Avenue West Hartford, CT 06110
2004 EDRIVE Design, Inc. Printed USA 11/2004