Hydroxyapatites

We describe the rapid, large scale purification of Fab fragments from mouse monoclonal antibodies. Antibodies against two clinically important and often fatal toxins, paraquat and desipramine, were isolated from mouse ascites fluid by preparative high performance hydroxylapatite (HPHT) or ion exchange (DEAE) high performance liquid chromatography. A competitive inhibition ELISA was used to determine the cross-reactivity of the antibody with analogs of the antigens. Papain digests of the IgGs were subjected to further HPHT followed by Sephadex G-100 chromatography to yield homogeneous Fab fragment preparations. The high purity of these preparations, demonstrated by SDS polyacrylamide gel electrophoresis, has only been achieved previously by affinity chromatography. Intrinsic association constants for the intact IgG and the Fab fragment--antigen interactions, determined by competitive inhibition ELISA, were similar. This indicates that antigen-binding activity was conserved during the...

The clinical use of plasma-sprayed hydroxyapatite (HA) coatings on metal implants has aroused as many controversies as interests over the last decade. Although faster and stronger fixation and more bone growth have been revealed, the performance of HA-coated implants has been doubted. This article will initially address the fundamentals of the material selection, design, and processing of the HA coating and show how the coating microstructure and properties can be a good predictor of the expected behavior in the body. Further discussion will clarify the major concerns with the clinical use of HA coatings and introduce a comprehensive review concerning the outcomes experienced with respect to clinical practice over the past 5 years. A reflection on the results indicates that HA coatings can promote earlier and stronger fixation but exhibit a durability that can be related to the coating quality. Specific relationships between coating quality and clinical performance are being established as characterization methods disclose more information about the coating. © 2001 John Wiley & Sons, Inc. J Biomed Mater Res (Appl Biomater) 58: 570–592, 2001

Dental caries, also known as tooth decay or a cavity, remains a major public health problem in the most communities even though the prevalence of disease has decreased since the introduction of fluorides for dental care. In addition, there is dental erosion, which is a chemical wear of the dental hard tissues without the involvement of bacteria. Besides, there are other dental losses, which may be of a medical (decay or periodontal disease), age (population aging), traumatic (accident) or genetic (disorders) nature. All these cases clearly indicate that biomaterials to fill dental defects appear to be necessary to fulfill customers' needs regarding the properties and the processing of the products. Bioceramics and glass-ceramics are widely used for these purposes, as dental inlays, onlays, veneers, crowns or bridges. Calcium orthophosphates (CaPO4) belong to bioceramics but they have some specific advantage over other types of bioceramics due to a chemical similarity to the inorganic part of both human and mammalian bones and teeth. Therefore, CaPO4 (both alone and as constituents of various formulations) are used in dentistry as both dental fillers and implantable scaffolds. This review provides brief knowledge on CaPO4 and describes in details current state-of-the-art on their applications in dentistry and dentistry-related fields. Among the recognized dental specialties, CaPO4 are most frequently used in periodontics; however, the majority of the publications on CaPO4 in dentistry are devoted to unspecified " dental " fields.

Bone fragility is a major health concern, as the increased risk of bone fractures has devastating outcomes in terms of mortality, decreased autonomy, and healthcare costs. Efforts made to address this problem have considerably increased our knowledge about the mechanisms that regulate bone formation and resorption. In particular, we now have a much better understanding of the cellular events that are triggered when bones are mechanically stimulated and how these events can lead to improvements in bone mass. Despite these findings at the molecular level, most exercise intervention studies reveal either no effects or only minor benefits of exercise programs in improving bone mineral density (BMD) in osteoporotic patients. Nevertheless, and despite that BMD is the gold standard for diagnosing osteoporosis, this measure is only able to provide insights regarding the quantity of bone tissue. In this article, we review the complex structure of bone tissue and highlight the concept that its mechanical strength stems from the interaction of several different features. We revisited the available data showing that bone mineralization degree, hydroxyapatite crystal size and heterogeneity, collagen properties, osteocyte density, trabecular and cortical microarchitecture, as well as whole bone geometry, are determinants of bone strength and that each one of these properties may independently contribute to the increased or decreased risk of fracture, even without meaningful changes in aBMD. Based on these findings, we emphasize that while osteoporosis (almost) always causes bone fragility, bone fragility is not always caused just by osteoporosis, as other important variables also play a major role in this etiology. Furthermore, the results of several studies showing compelling data that physical exercise has the potential to improve bone quality and to decrease fracture risk by influencing each one of these determinants are also reviewed. These findings have meaningful clinical repercussions as they emphasize the fact that, even without leading to improvements in BMD, exercise interventions in patients with osteoporosis may be beneficial by improving other determinants of bone strength.

Various types of grafts have been traditionally used to restore damaged bones. In the late 1960s, a strong interest was raised in studying ceramics as potential bone grafts due to their biomechanical properties. A bit later, such synthetic biomaterials were called bioceramics. In principle, bioceramics can be prepared from diverse inorganic substances but this review is limited to calcium orthophosphate (CaPO4)-based formulations only, which possess the specific advantages due to the chemical similarity to mammalian bones and teeth. During the past 40 years, there have been a number of important achievements in this field. Namely, after the initial development of bioceramics that was just tolerated in the physiological environment, an emphasis was shifted towards the formulations able to form direct chemical bonds with the adjacent bones. Afterwards, by the structural and compositional controls, it became possible to choose whether the CaPO4-based implants remain biologically stable once incorporated into the skeletal structure or whether they were resorbed over time. At the turn of the millennium, a new concept of regenerative bioceramics was developed and such formulations became an integrated part of the tissue engineering approach. Now CaPO4-based scaffolds are designed to induce bone formation and vascularization. These scaffolds are usually porous and harbor various biomolecules and/or cells. Therefore, current biomedical applications of CaPO4-based bioceramics include bone augmentations, artificial bone grafts, maxillofacial reconstruction, spinal fusion, periodontal disease repairs and bone fillers after tumor surgery. Perspective future applications comprise drug delivery and tissue engineering purposes because CaPO4 appear to be promising carriers of growth factors, bioactive peptides and various types of cells.

The historical development of a scientific knowledge on calcium orthophosphates (CaPO4) from 1770-s till 1950 is described. Many forgotten and poorly known historical facts and approaches have been extracted from old publications and then they have been analyzed, systematized and reconsidered from the modern point of view. The chosen time scale starts with the earliest available studies of 1770-s (to the best of my findings, CaPO4 had been unknown before), passes through the entire 19th century and finishes in 1950, because since then the amount of publications on CaPO4 rapidly increases and the subject becomes too broad. Furthermore , since publications of the second half of the 20th century are easily accessible, the substantial amount of them has been already reviewed by other researchers. The reported historical findings clearly demonstrate that the substantial amount of the scientific facts and experimental approaches has been known for very many decades and, in fact, the considerable quantity of relatively recent investigations on CaPO4 is just either a further development of the earlier studies or a rediscovery of the already forgotten knowledge.

To measure the efficacy of the whitening effect of non-oxidizing and non-acidic nano- and micro-hydroxyapatite materials on the enamel surface and to evaluate the surface changes after treatment. Three hydroxyapatite suspensions and two hydroxyapatite mixtures in dissolvable polymer films were applied to a total of 30 extracted caries-free human premolars. After the last material application, a hydrodynamic shear force was generated and applied for 2 minutes to all teeth to simulate mechanical loading of the surface. The tooth color was measured with a dental spectrophotometer. The mean changes of the L*a*b* values between different measurements in each group were expressed as delta E and were analyzed with ANOVA and the Tukey's post-hoc test. The groups of the nano-hydroxyapatite, the hydroxyapatite-nanocrystals and the tricalcium-phosphate exhibited significant delta E values between baseline and after hydrodynamic shear force application (P<0.05). In conclusion, the materi...

We have studied the chemistry, hydroxyapatite crystal size, and maturational changes in bone and dentin from rats exposed to microgravity for 12 days in a Soviet biosatellite (Cosmos 1887). Bone ash was reduced in vertebrae (L5) but not in the non-weight-bearing calvaria or mandibles. All tissues had a relatively normal percentage composition of Ca, P, and Mg. Nevertheless, flight rat calvaria and vertebral tissues tended to exhibit lower Ca/P and higher Ca/Mg ratios that any of their weight-matched controls groups, and gradient density analysis (calvaria) indicated a strong shift to the fractions lower specific gravity that was commensurate with impaired rates of matrix-mineral maturation. X-ray diffraction data were confirmatory. Bone hydroxyapatite crystal growth in the mandibles of flight rats was preferentially altered in such a way as to reduce their size (C-axis dimension). But in the mandibular diastemal region devoid of muscle attachments, flight rat bone and dentin were no...

Coal serves as the primary energy source in most parts of the world. It is a fact that coal combustion yields enormous quantities of fly ash some of which are either hydraulically placed or dry dumped. The current study attempts to provide a comprehensive characterisation of a disused alkaline fine coal ash dam (FCAD) towards assessing environmental impact, rehabilitation and utilisation potential. Fine coal ash refers to a combination of approximately 83% power station fly ash and 17% gasification and bottom ash fines (particles <250 lm) at SASOL Synfuels. The hydration products found in Weathered Fine Coal Ash (WFCA) using X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) are analcime, calcite, C–S–H gel, ettringite, hydrated gehlenite (Strätlingite), magnetite, periclase, pyrrhotite and sillimanite. High resolution Scanning Electron Microscope (SEM) results provide additional proof that hydration products are present in WFCA. No indication of appreciable leaching was given by X-ray Fluorescence (XRF) results except calcium and silicon. Thus evidence exists that pollutants from saline brines are immobilised in WFCA and an insight of reaction kinetics was obtained. High content of amorphous phase and lack of alteration in some geotechnical properties suggest that WFCA can be reutilised with lime addition to increase alkalinity and activate pozzolanic reactions.

Calcium phosphate based materials of natural origin with photocatalytic properties were produced. Bones of Atlantic cod fish were treated in appropriate solutions (either Ca-or Ti-containing salts) and successively annealed. Results showed multiphasic materials (hydroxyapatite, b-tricalcium phosphate and anatase titania) with excellent photocatalytic performance under both UV and visible light, with an anatase concentration of only about 2 mol%. Results with such a low amount of anatase have never been reported before for a calcium phosphate-based material; this is attributed to the presence of anatase being mainly on the surface. Single-phase hydroxyapatite (Ca 10 (PO 4) 6 (OH) 2 or HAp) also showed some photocatalytic properties and antibacterial activity.

The present study describes the effects of dopants of Mn and/or Ni on the structural, magnetic and in vivo/in vitro performances of β-tricalcium phosphate (β-TCP) bioceramics synthesized by a sol-gel method. Both types of dopants caused significant effects on the structure-related parameters of β-TCP, including the crystallite dimensions and lattice parameters. The magnetic properties of as-prepared samples were found to be affected by the type and amount of the dopant(s). The in vitro antimicrobial activities of doped β-TCPs against American Type Culture Collection (ATCC) reference bacterial and fungal strains were evaluated. Among them, only 1.35Ni-TCP displayed an effective antimicrobial activity against Gram-positive bacteria (50 μg/mL Minimum Inhibitory Concentration (MIC) range), while other types of doped β-TCPs did not possess with such effect. The in vivo tests showed that each formulation could be a good nominate for bone healing and bone treatment.

Since surface properties of hydroxyapatite (HA) play an important role in its performance, surface modification of HA has gained much attention from researchers. Silane coupling agents have been the focus of the research. In this study, an effective surface modification method was developed using hexamethylene diisocyanate as a coupling agent. Polyethylene glycol (Mw=1500) was successfully coupled to the surface of nano-size apatite particles (nano-apatite). Various methods were used to characterize the surface-modified nano-apatite. Infra-red spectra confirmed the existence of a layer of polymer with both urethane and ether linkage on the surface of nano-apatite. The amount of grafted polymer as determined by total organic carbon analysis (TOC) and thermal gravimetric analysis (TGA) was about 20% in weight. Solid 1H MAS NMR spectra indicated that the amount of hydroxyl groups of nano-apatite was decreased by 7.7% after surface grafting reaction. It is concluded that the surface hydroxyl groups of nano-apatite have the reactivity towards isocyanate groups.