Nothing Special   »   [go: up one dir, main page]

Dearlove et al., 1995 - Google Patents

Simultaneous piston ring friction and oil film thickness measurements in a reciprocating test rig

Dearlove et al., 1995

Document ID
7501982410516963707
Author
Dearlove J
Cheng W
Publication year
Publication venue
SAE transactions

External Links

Snippet

A reciprocating test apparatus was constructed in which the friction of a single piston ring against a liner segment was measured. The lubrication oil film thickness was also measured simultaneously at the mid stroke of the ring travel using a laser fluorescence technique. The …
Continue reading at www.jstor.org (other versions)

Classifications

    • GPHYSICS
    • G01MEASURING; TESTING
    • G01NINVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N33/00Investigating or analysing materials by specific methods not covered by the preceding groups
    • G01N33/26Investigating or analysing materials by specific methods not covered by the preceding groups oils; viscous liquids; paints; inks
    • G01N33/28Oils, i.e. hydrocarbon liquids
    • GPHYSICS
    • G01MEASURING; TESTING
    • G01NINVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N3/00Investigating strength properties of solid materials by application of mechanical stress
    • G01N3/40Investigating hardness or rebound hardness
    • G01N3/42Investigating hardness or rebound hardness by performing impressions under a steady load by indentors, e.g. sphere, pyramid
    • GPHYSICS
    • G01MEASURING; TESTING
    • G01MTESTING STATIC OR DYNAMIC BALANCE OF MACHINES OR STRUCTURES; TESTING STRUCTURES OR APPARATUS NOT OTHERWISE PROVIDED FOR
    • G01M13/00Testing of machine parts
    • G01M13/02Testing of gearing or of transmission mechanisms
    • GPHYSICS
    • G01MEASURING; TESTING
    • G01BMEASURING LENGTH, THICKNESS OR SIMILAR LINEAR DIMENSIONS; MEASURING ANGLES; MEASURING AREAS; MEASURING IRREGULARITIES OF SURFACES OR CONTOURS
    • G01B11/00Measuring arrangements characterised by the use of optical means
    • G01B11/30Measuring arrangements characterised by the use of optical means for measuring roughness or irregularity of surfaces
    • GPHYSICS
    • G01MEASURING; TESTING
    • G01MTESTING STATIC OR DYNAMIC BALANCE OF MACHINES OR STRUCTURES; TESTING STRUCTURES OR APPARATUS NOT OTHERWISE PROVIDED FOR
    • G01M15/00Testing of engines
    • G01M15/04Testing of internal-combustion engines, e.g. diagnostic testing of piston engines
    • GPHYSICS
    • G01MEASURING; TESTING
    • G01NINVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N21/00Investigating or analysing materials by the use of optical means, i.e. using infra-red, visible or ultra-violet light
    • GPHYSICS
    • G01MEASURING; TESTING
    • G01NINVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N15/00Investigating characteristics of particles; Investigating permeability, pore-volume, or surface-area of porous materials

Similar Documents

Publication Publication Date Title
Dearlove et al. Simultaneous piston ring friction and oil film thickness measurements in a reciprocating test rig
Vlădescu et al. Lubricant film thickness and friction force measurements in a laser surface textured reciprocating line contact simulating the piston ring–liner pairing
Notay et al. The influence of lubricant degradation on measured piston ring film thickness in a fired gasoline reciprocating engine
Spikes The behaviour of lubricants in contacts: current understanding and future possibilities
Ting Development of a laser fluorescence technique for measuring piston ring oil film thickness
Hoult et al. Calibration of laser fluorescence measurements of lubricant film thickness in engines
Wigger et al. Quantitative two-dimensional measurement of oil-film thickness by laser-induced fluorescence in a piston-ring model experiment
Obert et al. Oil distribution and oil film thickness within the piston ring-liner contact measured by laser-induced fluorescence in a reciprocating model test under starved lubrication conditions
Wong et al. Experimental survey of lubricant-film characteristics and oil consumption in a small diesel engine
Aziz Interferometric measurement of surface roughness in engine cylinder walls
Dellis Piston-ring performance: limitations from cavitation and friction
Grice et al. An experimental investigation into the lubrication of piston rings in an internal combustion engine-oil film thickness trends, film stability and cavitation
Brown et al. Characterization of the oil film behaviour between the liner and piston of a heavy-duty diesel engine
Bulsara et al. Measurement of oil film thickness between piston ring and liner using strain gauge
Söchting et al. The effect of load and viscosity on the minimum operating oil film thickness of piston-rings in internal combustion engines
Phen et al. Measurements of cylinder liner oil film thickness in a motored diesel engine
Galligan et al. A scuffing test for piston ring/bore combinations: Part I. Stearic acid lubrication
Tamai Experimental study of engine oil film thickness dependence on liner location, oil properties and operating conditions
Akalin et al. A new experimental technique for friction simulation in automotive piston ring and cylinder liners
Emre Ayranci et al. Continuous lubricant film thickness measurement between piston ring and cylinder bore
Dellis An attempt to calibrate the laser induced fluorescence (LIF) signal used for oil film thickness (OFT) measurements in simulating test rigs
Yasukazu et al. PIV/LIF measurements of oil film behavior on the piston in IC engine
Arcoumanis et al. Cold-start measurements of the lubricant film thickness in the cylinder of a firing diesel engine
Ryan et al. Engine experiments on the effects of design and operational parameters on piston secondary motion and piston slap
Fox et al. The``limits of lubrication''concept applied to thepiston ring zone lubrication of modern engines