Nothing Special   »   [go: up one dir, main page]

Ting, 1980 - Google Patents

Development of a laser fluorescence technique for measuring piston ring oil film thickness

Ting, 1980

Document ID
4326903551755106429
Author
Ting L
Publication year

External Links

Snippet

A single cylinder engine equipped with a transparent cylinder sleeve has been used to develop a technique to make visual investigations of piston ring lubrication behavior and engine oil loss mechanism. This paper describes this apparatus and the development of a …
Continue reading at asmedigitalcollection.asme.org (other versions)

Classifications

    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N33/00—Investigating or analysing materials by specific methods not covered by the preceding groups
    • G01N33/26—Investigating or analysing materials by specific methods not covered by the preceding groups oils; viscous liquids; paints; inks
    • G01N33/28—Oils, i.e. hydrocarbon liquids
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01M—TESTING STATIC OR DYNAMIC BALANCE OF MACHINES OR STRUCTURES; TESTING STRUCTURES OR APPARATUS NOT OTHERWISE PROVIDED FOR
    • G01M15/00—Testing of engines
    • G01M15/04—Testing of internal-combustion engines, e.g. diagnostic testing of piston engines
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N21/00—Investigating or analysing materials by the use of optical means, i.e. using infra-red, visible or ultra-violet light
    • G01N21/17—Systems in which incident light is modified in accordance with the properties of the material investigated
    • G01N21/41—Refractivity; Phase-affecting properties, e.g. optical path length
    • G01N21/43—Refractivity; Phase-affecting properties, e.g. optical path length by measuring critical angle
    • G01N21/431—Dip refractometers, e.g. using optical fibres
    • G01N2021/432—Dip refractometers, e.g. using optical fibres comprising optical fibres
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N3/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N3/56—Investigating resistance to wear or abrasion
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N3/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N3/40—Investigating hardness or rebound hardness
    • G01N3/42—Investigating hardness or rebound hardness by performing impressions under a steady load by indentors, e.g. sphere, pyramid
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01B—MEASURING LENGTH, THICKNESS OR SIMILAR LINEAR DIMENSIONS; MEASURING ANGLES; MEASURING AREAS; MEASURING IRREGULARITIES OF SURFACES OR CONTOURS
    • G01B11/00—Measuring arrangements characterised by the use of optical means
    • G01B11/22—Measuring arrangements characterised by the use of optical means for measuring depth
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01B—MEASURING LENGTH, THICKNESS OR SIMILAR LINEAR DIMENSIONS; MEASURING ANGLES; MEASURING AREAS; MEASURING IRREGULARITIES OF SURFACES OR CONTOURS
    • G01B11/00—Measuring arrangements characterised by the use of optical means
    • G01B11/16—Measuring arrangements characterised by the use of optical means for measuring the deformation in a solid, e.g. optical strain gauge
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N15/00—Investigating characteristics of particles; Investigating permeability, pore-volume, or surface-area of porous materials

Similar Documents

Publication Publication Date Title
Ting Development of a laser fluorescence technique for measuring piston ring oil film thickness
Sherrington et al. Experimental methods for measuring the oil-film thickness between the piston-rings and cylinder-wall of internal combustion engines
Notay et al. The influence of lubricant degradation on measured piston ring film thickness in a fired gasoline reciprocating engine
Kirner et al. Experimental and simulative research advances in the piston assembly of an internal combustion engine
Wigger et al. Quantitative two-dimensional measurement of oil-film thickness by laser-induced fluorescence in a piston-ring model experiment
Fatjo et al. Mapping lubricating film thickness, film extent and ring twist for the compression-ring in a firing internal combustion engine
Dearlove et al. Simultaneous piston ring friction and oil film thickness measurements in a reciprocating test rig
Gohl et al. Investigation of oil sources in the combustion chamber of direct injection gasoline engines
Takiguchi et al. Variation of piston ring oil film thickness in an internal combustion engine—comparison between thrust and anti-thrust sides
Richardson et al. Theoretical and experimental investigations of oil films for application to piston ring lubrication
Wong et al. Experimental survey of lubricant-film characteristics and oil consumption in a small diesel engine
Taylor et al. In-situ piston measurements
CN110274546A (en) A kind of oil film thickness scaling method and device based on LIF technology
Yilmaz et al. Analysis of oil consumption behavior during ramp transients in a production spark ignition engine
Schäffer et al. Development of a Measuring System for the Visualization of the Oil Film between the Piston and Cylinder Liner of a Gasoline Engine
Yasukazu et al. PIV/LIF measurements of oil film behavior on the piston in IC engine
Hoult et al. The Puddle Theory of Oil Consumption©
Emre Ayranci et al. Continuous lubricant film thickness measurement between piston ring and cylinder bore
Inagaki et al. Measurement of oil film thickness distribution on piston surface using the fluorescence method: development of measurement system
Arcoumanis et al. Measurements of the lubricant film thickness in the cylinder of a firing diesel engine using LIF
Moore et al. The piston ring at top dead centre
Söchting et al. The effect of load and viscosity on the minimum operating oil film thickness of piston-rings in internal combustion engines
Taylor et al. Combustion processes in a medium-speed diesel engine
Dellis An attempt to calibrate the laser induced fluorescence (LIF) signal used for oil film thickness (OFT) measurements in simulating test rigs
Moore Discussion:“Development of a Laser Fluorescence Technique For Measuring Piston Ring Oil Film Thickness”(Ting, LL, 1980, ASME J. Lubr. Technol., 102, pp. 165–170)