Nothing Special   »   [go: up one dir, main page]

Jin et al., 2014 - Google Patents

Low-cost high-quality constant offset injection for SEIR-based ADC built-in-self-test

Jin et al., 2014

View PDF
Document ID
7272921575556305746
Author
Jin X
Sun N
Publication year
Publication venue
2014 IEEE International Symposium on Circuits and Systems (ISCAS)

External Links

Snippet

Linearity test is a fundamental test for ADCs in production. The stringent linearity requirement for an on-chip signal generator has made ADC built-in-self-test (BIST) solutions prohibitive in the past. The stimulus error identification and removal (SEIR) method has …
Continue reading at scholar.archive.org (PDF) (other versions)

Classifications

    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/38—Analogue value compared with reference values sequentially only, e.g. successive approximation type
    • H03M1/40—Analogue value compared with reference values sequentially only, e.g. successive approximation type recirculation type
    • H03M1/403—Analogue value compared with reference values sequentially only, e.g. successive approximation type recirculation type using switched capacitors
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0675—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy
    • H03M1/069—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy by range overlap between successive stages or steps
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0634—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale
    • H03M1/0656—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale in the time domain
    • H03M1/066—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale in the time domain by continuously permuting the elements used, i.e. dynamic element matching
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/36—Analogue value compared with reference values simultaneously only, i.e. parallel type
    • H03M1/361—Analogue value compared with reference values simultaneously only, i.e. parallel type having a separate comparator and reference value for each quantisation level, i.e. full flash converter type
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0675—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy
    • H03M1/0678—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/14—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1071—Measuring or testing
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1009—Calibration
    • H03M1/1033—Calibration over the full range of the converter, e.g. for correcting differential non-linearity
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/08—Continuously compensating for, or preventing, undesired influence of physical parameters of noise
    • H03M1/0836—Continuously compensating for, or preventing, undesired influence of physical parameters of noise of phase error, e.g. jitter
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/66—Digital/analogue converters
    • H03M1/74—Simultaneous conversion
    • H03M1/80—Simultaneous conversion using weighted impedances
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0602—Continuously compensating for, or preventing, undesired influence of physical parameters of deviations from the desired transfer characteristic
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1004—Calibration or testing without interrupting normal operation, e.g. by providing an additional component for temporarily replacing components to be tested or calibrated
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M3/00—Conversion of analogue values to or from differential modulation
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M7/00—Conversion of a code where information is represented by a given sequence or number of digits to a code where the same information or similar information or a subset of information is represented by a different sequence or number of digits

Similar Documents

Publication Publication Date Title
Ryu et al. A 14-b linear capacitor self-trimming pipelined ADC
Chen et al. USER-SMILE: Ultrafast stimulus error removal and segmented model identification of linearity errors for ADC built-in self-test
Njinowa et al. Design of low power 4-bit flash ADC based on standard cells
Chen et al. Ultrafast stimulus error removal algorithm for ADC linearity test
Jin et al. Low-cost high-quality constant offset injection for SEIR-based ADC built-in-self-test
Liu et al. Uniform quantization theory-based linearity calibration for split capacitive DAC in an SAR ADC
Juan et al. A distortion cancelation technique with the recursive DFT method for successive approximation analog-to-digital converters
Duan et al. Low-cost dithering generator for accurate ADC linearity test
Huang et al. A self-testing and calibration method for embedded successive approximation register ADC
Kerzérho et al. A novel implementation of the histogram-based technique for measurement of INL of LUT-based correction of ADC
Ashwini et al. Design of linear ramp generator for ADC
Jin et al. A digital self-calibration algorithm for ADCs based on histogram test using low-linearity input signals
Chen et al. An ultrafast multibit/stage pipelined ADC testing and calibration method
Salib et al. Blind SAR ADC capacitor mismatch calibration
Sivakumar et al. Error detection of data conversion in flash ADC using code width based technique
Arteaga et al. Blind adaptive estimation of integral nonlinear errors in ADCs using arbitrary input stimulus
Huang et al. Testing and calibration of SAR ADCs by MCT-based bit weight extraction
Jiang et al. A DSP-based ramp test for on-chip high-resolution ADC
Renaud et al. On-chip implementation of an integrator-based servo-loop for ADC static linearity test
Feitoza et al. Reduced-code techniques for on-chip static linearity test of sar adcs
Duan et al. A low cost method for testing offset and gain error for ADC BIST
Olleta et al. A deterministic dynamic element matching approach for testing high-resolution ADCs with low-accuracy excitations
Duan et al. High-constancy offset generator robust to cdac nonlinearity for SEIR-based ADC BIST
Duan et al. SNR measurement based on linearity test for ADC BIST
Mohammedali et al. An Accurate and Fast Method for Improving ADC Nonlinearity