Iplagi kunye nokuDlala, i-BCM-Elawulwayo, i-OE Light Flash Module
ZW-GM
T-Harness
I/O Ukubotshwa kweqhosha
(usetyenziso ngokuzikhethela)
Enkosi ngokuthenga iyunithi ye-Z-WAGZ yokwenene, eyona ilula ye-BCM-modyuli yokukhanyisa izibane ze-OEM ngokucofa iqhosha. Le yunithi iza kucwangciswa kwangaphambili kunye neepatheni zokukhanya ezahlukeneyo ezi-8, ezinye zeenkqubo ze-halogen & ezinye zeenkqubo ze-LED zijonga ngezantsi ngolwazi olupheleleyo lokusebenza kubandakanya ubume bebhodi ye-LED.
Ukusebenza kwazo zonke izithuthi zeGM kuyafana:
1. Faka iyunithi ye-Z-WAGZ kwiyunithi ye-OE BCM. Landela imiyalelo ekwiphepha lesi-2 kuzo zonke izithuthi.
2. Vula i-Ignition (I-Ignition mayivulwe ukuze usebenze ngokufanelekileyo). Shiya isithuthi ePaki.
3. Ukwenza i-Z-WAGZ isebenze:
- Cofa kwaye ubambe i umtha ophezulu ilever (5 imizuzwana) OKANYE
- Cofa kwaye ubambe okunikiweyo tyhala iqhosha (3 imizuzwana) OKANYE
- Thumela umqondiso obambeneyo we-12v (+) kwi ucingo oluhlaza (yenzelwe ukuba yondiselwe iiswitshi ze-OE up-fitter)
Ipateni yoku-1 izakuqala ukudanyaza. Nje ukuba ipateni yoku-1 iqale, iingozi kwigauji yeqela ziya kuqhwanyaza ka-1, ebonisa ukuba iPatheni yoku-1 ikhethiwe kwaye i-LED kwiyunithi iya kuqhwanyaza EBLUE. Jonga itshathi yesalathiso sombala wepateni eseleyo.
4. Ukutshintshela kwiPatheni yesi-2: (Ipateni yoku-1 kufuneka isebenze ngoku)
- Bamba isignali yokujika, uze ucinezele kwaye UBAMBA i umtha ophezulu i-lever kanye kwakhona (5 imizuzwana). OKANYE
- Cofa kwaye ukhulule iqhosha lokucofa elinikiweyo
Iingozi ziya kudanyaza kabini zibonisa ukuba iPateni yesi-2 ikhethiwe. Phinda le nkqubo ukutshintshela kwipatheni elandelayo.
5. Ukucima i-Z-WAGZ:
- Cofa kwaye ubambe i umtha ophezulu intambo OKANYE
- Cofa kwaye ubambe iqhosha lokutyhala elinikiweyo OKANYE
- Khupha umqondiso we-12v (+) kwi ucingo oluhlaza (ukuba idityaniswe ngolu hlobo)
AMANQAKU:
- Izithuthi ezixhotyiswe ngezibane ze-LED kufuneka zisebenzise iipateni ze-LED. Izithuthi ezineebhalbhu eziqhelekileyo kufuneka zisebenzise iipateni zebhalbhu.
- Azikho zonke izibane kwisithuthi eziyimfuneko, ezinye izibane azilawuleki ngedatha ye-BCM CAN.
- I-Z-WAGZ iya kugcina iphethini yokugqibela esetyenzisiweyo, nasemva kokuba ikhutshwe kwi-BCM (ukuba ikhona).
- Xa idanyazi lisebenza: imiqondiso yokujika, izibane zangaphambili kunye nezibane ezibuya umva ziyakugqitha ipateni yokudanyaza, de kucinywe kwakhona.
- Xa kwezinye iipateni, kwezinye izithuthi, umfanekiso wekhamera umva unokuvela/ubanentse kwiscreen se-OE (ukuba sixhotyiswe). Lo ngumda wefektri kwaye uqhelekile. Ukuba ufuna ukuyiphepha le nto, gcina i-DIP (3) IVILE.
- 'Imo Yokulima', xa isebenza (INPUT 2), ikhubaza ukudanyaza okuPhakamileyo nokuPhantsi kwaye icothise ipateni ezantsi ukuze ibhokisi yokudlulisela (imodyuli yokulima) ikwazi ukuhambisana nodanyazo (luthintela ukufudumeza).
UFakelo lweMoto yeGM
- Fumana iyunithi yeBCM. Itshathi engezantsi ibonisa indawo ye-BCM kwiimoto ezahlukeneyo.
- Isithuthi ESIVALIWE: qhawula (4) iiplagi eziphawulweyo ezibonisiweyo. Qhagamshela icala lendoda kwi-T-Harness nganye kwi-BCM kunye (isusiwe) iiplagi kwicala labasetyhini le-Z-WAGZ BCM yokubopha. Ezi ziqhagamshelo zinokungena kwindawo enye kwaye zidibanise ngendlela enye kwaye zinemibala ehambelana neeplagi ze-OE.
- Xhuma iyunithi ye-Z-WAGZ ye-BCM kwikhonkco ye-22-pin, bopha iyunithi kwenye i-harness ukuba unqwenela.
- Buyela kwiphepha (1) ngemiyalelo yokusebenza.
Iindawo ze-GM BCM:
|
UMZEKELO |
LOCATION |
| Silverado/Sierra/Colorado |
Ngaphantsi kwevili lokuqhuba / indawo yedash |
Izithuthi eziqinisekisiweyo:
|
YENZA |
UMZEKELO | UNYAKA |
| GM | Silverado / Sierra |
2014-2022.5 |
|
IColorado / Canyon |
2018-2022.5 | |
| Silverado Sierra 2500/3500 HD |
2014-2022.5 |
|
|
Tahoe/Suburban |
2018-2020 |
Imodyuli yoLawulo loMzimba we-OE GM
*'Imo Yokulima', xa isebenza (INPUT 2), ikhubaza ukudanyaza kwe-High & Low ye-beam kwaye icothise ipateni ezantsi ukuze ibhokisi ye-relay (imodyuli yokulima) ikwazi ukuqhubeka nokudanyaza (ithintela ukufudumeza).
Oku kufuneka kwenziwe nanini na xa ikhuba lidityanisiwe.
- I/O AMANQAKU OKUHAMBISANA:
– IZIPHUMO yi-100mA MAX. Sukunika amandla nantoni na efuna umsinga ophezulu ngezi ziphumo! Sebenzisa iireyidi okanye uqhagamshele ukuqalisa amagalelo kuphela.
-IZIPHUMO EZILUNGILEYO NEZINXELE ziya kujonga izibane ze-OE ERIGHT & LEFT ngokulandelelana (xa iyunithi isebenza). - Shiya ezi plugs zeOEM ziqhagamshelwe
- Izihlanganisi ze-OE BCM ezimhlophe, ezibhlowu, ezipinki, ezingwevu (zisusiwe)
- 22-Pin (amandla/uqhagamshelwano lwedatha)
- Iiswitshi ze-DIP (ukhetho)
- Imeko ye-LED
- USB (uhlaziyo)
- I-12-PIN yokucofa iqhosha
I/O intambo
Izicwangciso zoTshintsho lwe-DIP, Iimpawu ezongezelelweyo
Ibekwe kwicala elingasemva leyunithi yibhanki (6) yokutshintshela idiphu - uya kufuna isixhobo sokukhetha ukulungisa.
Zonke iiswitshi zediphu zi-LIVE, musa ukukhulula iplagi imodyuli yokulungelelanisa.
|
DIP |
1 | 2 | 3 | 4 | 5 | 6 |
| ON | Khubaza I-Beam ephezulu |
Khubaza Umtha ophantsi |
Nika uReverse Light (Inokubangela ukuba ikhamera ibonakale kwiscreen ngelixa isebenza) |
Ye-HALOGEN ixhotyiswe (Kancincana) |
Khubaza iMowudi ye-STROBE (Isusa istrobe rhoqo kwimizuzwana emi-3) |
N / A |
|
CIMA |
Vulela I-Beam ephezulu |
Vulela Umtha ophantsi |
Khubaza ukuBuyiswa kokukhanya | Ye-LED ixhotyiswe (Ngesantya) |
Vulela INDLELA YOKUSEBENZA |
N / A |
'Imo Yokulima', xa isebenza (INPUT 2), ikhubaza ukudanyaza okuPhakamileyo nokuPhantsi kwaye icothise ipateni ezantsi ukuze ibhokisi yokudlulisela (imodyuli yokulima) ikwazi ukuhambisana nodanyazo (luthintela ukufudumeza). Oku kufuneka kwenziwe nanini na xa ikhuba lidityanisiwe.
|
Inkcazo |
Imeko ye-LED | Iinkcukacha ezithe xaxe |
| Ukuvuka kokuqala | Iqhwanyaza UBLUE (ixesha eli-1) |
Ekudibaneni kwamandla okuqala |
|
Iyunithi yazi ibhasi ye-CAN (icala lemoto KUPHELA) |
Iqhwanyaza UBLUE (amaxesha ama-3) | Ekuvukeni kwedatha ye-CAN |
| Iyunithi iyaqaphela ibhasi ye-CAN (icala lemodyuli KUPHELA) | Iqhwanyaza LULULU (3 amaxesha) |
Ekuvukeni kwedatha ye-CAN |
|
Iyunithi iyaqaphela ibhasi ye-CAN (ngokufanelekileyo) |
Iibhinki BLUE, LULUHLAZA (x3) | Ekuvukeni kwedatha ye-CAN |
| Iyunithi ibhaqa ulwazi lwe-ACC | Iqhwanyaza OKULULU (ixesha eli-1) |
Ekujikeni koKulayita |
|
Iyunithi ibhaqa ulwazi lweGEAR |
Ukuqhwanyaza kweVIOLET (ixesha eli-1) | Xa utshintsha iigiya |
| Iyunithi ibhaqa ukutsalwa kweBEAM OKUPHAKAMILEYO OKANYE cinezela iqhosha langaphandle (ukwenza kusebenze) | UQINILEYO |
Xa ucofa i-High Beam lever okanye iqhosha elinikiweyo lokutyhala |
|
Iyunithi ifumana impendulo engalunganga kwimiyalelo yokukhanya |
Iqhwanyaza nge-VILOET (x3) | –Qhagamshelana noZZ2– |
| Iyunithi ayifumani siqinisekiso semiyalelo yokukhanya | Iqhwanyaza RED (x1) |
–Qhagamshelana noZZ2– |
|
Xa iyunithi ilala |
Iqhwanyaza EMHLOPHE (x1) | — |
| INGABA yingxaki yonxibelelwano lwebhasi | Iqhwanyaza RED + LULUHLAZA |
Ngoxa i-Z-WAGZ ivuliwe |
|
Inkcazo |
Imeko ye-LED | Iinkcukacha ezithe xaxe |
| Ipateni yoku-1 | Iqhwanyaza UBLUE |
ISISEKO PATTERN |
|
Ipateni yoku-2 |
Iqhwanyaza LULULU | AMANZI PATTERN |
| Ipateni yoku-3 | Iqhwanyaza RED |
IPATTERN EKUBUNQIWEYO |
|
Inkcazo |
Inkcazo | Iinkcukacha ezithe xaxe |
| Umzobo wangoku uyasebenza: |
100mA max |
|
|
Umzobo wangoku awusebenzi: |
7mA max | |
| INPUT 1 okanye 2 Trigger wire act: | 12V (+) |
Hardwire activation trigger |
|
ISIPHUMO 1: 12v (+) |
100mA max | Iziphumo 12v (+) nanini na iyunithi iyasebenza |
| ISIPHUMO 2 (EKUDENI): 12v (+) | 100mA max |
I-Mimics ipateni yesignali yojiko eRIGHT |
|
ISIPHUMO 3 (EKHOXHO): 12v (+) |
100mA max | IiMimics jika ipateni yesignali ye-LEFT |
| Qalisa ucingo lungasebenzi: |
3.3V |
|
|
Umda wangoku: |
10mA |
555 S Pompano Pkwy, Pompano Beach, FL 33069 | 929-220-1212
Amaxwebhu / Izibonelelo
| Z-WAGZ ZW-GM OE Light Flash Module [pdf] Isikhokelo somsebenzisi I-ZW-GM OE iModyuli yokuKhanya kweFlash, i-ZW-GM OE, iModyuli yokuKhanya, iModyuli yokuKhanya, iModyuli |