SENSSUN iF2828A Smart Body Fat Scale Instruction Manual

After the initial binding, no need to connect the mobile phone. Measurement data is saved and will be automatically uploaded to the APP when the phone is connected next time.

Small-Object Weighing Mode

The scale can directly weigh objects over 0.1kg. For objects under 10kg, step on the scale surface first to wake it up (apply a force greater than 5kg and press the scale surface), then wait until the scale returns to zero before weighing.

Battery Installation

4*1.5V AA batteries are used for this scale. Follow the instructions below to change the batteries:

Open the battery cover
Remove used batteries

Install new batteries properly

Note: Remove the battery if the scale is unused for more than 3 months. Wait for about 6 seconds after installing or moving the scale to allow it to switch off, then step lightly on it to wake it up before use.

About the Unit

It is recommended to set the unit on the App. The scale has a unit conversion button located at the bottom. Press this button to select the desired unit. The factory default unit setting may vary based on sales destination.

PRODUCT INFORMATION

BRIEF INTRODUCTION

This scale adopts 8 electrodes, multi-frequency BIA and other technologies, which can accurately measure and analyse a full range of body data. Used in conjunction with the APP, it can display and record comprehensive body data, as well as analyse and draw the change trajectory, and check the body changes at any time. It’s the first step to control your weight and keep your body shape.

STATEMENT

The pictures, colours, accessories, user interface and other illustrations in the manual are for illustration only. Due to product upgrades, there may be slight differences between the actual product and the illustrations. Please refer to the actual product.

IMPORTANCE INSTRUCTIONS

Accurate body data may not be available for the following groups of people:

Minors, seniors over 80 years old.
Professional athletes.

Pregnant women, artificial dialysis patients, people in a swollen state.
It’s prohibited for people with pacemakers or other transplanted medical devices in their bodies from using it.

MODE INSTRUCTIONS

Weight measurement mode: No need to pull up the handle. Step on the scale to complete the measurement.
Accurate body fat measurement mode: You need to pull up the handle according to the correct operation requirements. (For the first time, you need to bind the APP and establish a user.)
Offline Mode: After the first binding, no need to connect the mobile phone. You can save each measurement data, and it will be automatically uploaded and saved to the APP when your mobile phone is connected next time.
Small object weighing mode: The scale can directly weigh objects over 0.1kg. For small objects under 10kg, you need to step on the scale surface first to wake up the scale (apply a force greater than 5kg and press the scale surface) and wait until the scale has returned to zero before weighing.

GENERAL VIEW OF THE PRODUCT

FRONT SIDE

GENERAL VIEW OF THE PRODUCT

BATTERY INSTALLATION

4*1.5V AA batteries are used for this scale. Please replace them as per the instructions below: Change battery: Open the battery cover, take out the used batteries, then install the new ones properly as shown below.

Note: Please use the right battery. Remove battery if the scale leaves unused for more than 3 months. The battery and related pictures are for reference only, please refer to the actual product.

Usage Tip: After installing the battery or moving the scale, it will result in showing a residual value (no weighing but there is a weight shown on the display). Please wait about 6 seconds for the scale to switch off and then step lightly on the scale to wake it up. Use it only after it displays 0.00kg again.

ABOUT THE UNIT

It is suggested to set the unit on App. The scale has a unit conversion button. Open the battery cover at the bottom of the scale, in the position as shown below, and press this button to select the unit you need. The factory unit setting differs from different sales destination. Please refer to the actual product.

HOW TO USE

Step 1: Place the scale properly and download the APP.
- Search “MovingLife” in “App Store” or “Google Play” to download the Application. Or in another most convenient way by scanning the QR code above.
Step 2: Register and bind the device
- Turn on the Bluetooth on your phone, open the APP, and follow the guidelines to register and bind the device:
- Warm reminder:
- Personal body information is only used for body composition analysis, not for other purposes. To ensure the accuracy of the results, please enter accurate personal information.

Step 3: Measure
- Body Composition Analysis Measurements
  1. Place the scale on a hard, flat surface and open the App.
  2. Gently step on the scale with bare feet and place your feet on the 4 electrodes on the left and right side of the scale, then lift up the handle. Please hold the handle with both hands as shown in the picture, adjust the height of both hands and straighten your arms (it is best if your arms don’t touch your waist).
  3. After the weight value displayed in the window has stabilised and is blinking, the body composition analysis measurement begins.
  4. Check the measurement reports with the APP
- Tips：
  - The whole process will take about 30 seconds.
  - If the APP is not connected for the first time of measuring, only weight can be measured, but no body fat. Please connect the APP before using.
  - App is kept updating, so it may differ from shown on manual. For the final and accurate information, please check on App.

Wrong Measuring Postures

DISPLAY ICONS

(Note: Display differs from one to another, so below picture is for indicative only.)

MULTIPLE USERS SUPPORTED

Multiple users binding in one scale is supportable. A maximum of 15 groups of historical data for each user can be stored. Data will be automatically synchronized to the smart device when the APP is running.

Note: The final user amount depends on the product.

ADVICE FOR USE & CARE

To ensure the accuracy of the data, it is recommended that each measurement be taken at the same time of day, with the recommended time of measurement being 2 hours after a meal.
- Body weight changes with eating and drinking, and body fat percentage = fat weight/weight, so it is normal for fat percentage to fluctuate.

Please do not make measurements in strong electromagnetic interference environments or places with high vibration.
When weighing after not using the scale for a long time or after moving it, please step on the scale surface first, and wait for it to return to zero. Let it switch off automatically before switching on and weighing.
To ensure the accuracy of the fat measurement, please take off your shoes and socks, try to remove the influence of other weights outside your body, wash and wipe your hands and feet, and then step on the scale with your bare feet and hold the handle with both hands to take the measurement.

The scale surface is smooth. Please do not use this product on slippery ground or step on the edge of the scale. When weighing on the scale, first stand in the middle of the scale surface. Adjust your feet after standing steadily and step evenly on the 4 electrodes. Please keep your body stable and balanced to prevent the side from tipping or slipping.
Do not measure after strenuous exercise, overeating, bathing, sauna, hot springs, or in a state of extreme dehydration.
The product should be kept away from high temperatures. Please do not use the product in a humid, too-hot, or too-cold environment (using a temperature range of 5℃~35℃).

If the product does not work properly, please check the batteries. Replace them with new ones if necessary.
The product is a precision instrument, and can not be disassembled. Please do not drop or knock.
Please keep the product clean. Do not use acidic detergent to clean it.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FAQs

The software can’t obtain weighing results from the scale.
- Please confirm the connection sign on the smart device to know the connection status.
- Confirm the Bluetooth is on in your device and the scale is within the valid range of signal coverage.
- Check whether the battery power is running low, please replace it with a new battery.
- Relaunch the application.
- Turn off the Bluetooth and on again, then bridge the Bluetooth connection between the scale and the smartphone again.

Fail to connect to your device
- Please make sure only one device is setting up a connection with the scale.
- Please make sure your device is equipped with Bluetooth 4.0 or above.

The screen has no response
- Please first check the batteries and replace them if necessary.
- Repairs may only be carried out by our authorized customer service or dealers.

The product picture is indicative only. Appearance specifications please in kind prevail.

CONTACT INFORMATION

Manufacturer: Zhongshan Camry Electronic Co., Ltd.
Address: Baishawan Industrial Park, Qiwan Road(N), East District, Zhongshan City, Guangdong Province Postal Code: 528403

Tel: 0760-88235622
Fax: 0760-88235600
Email: sales@camry.com.cn

Documents / Resources

SENSSUN iF2828A Smart Body Fat Scale [pdf] Instruction Manual
Q22-IF2828A, Q22IF2828A, IF2828A, iF2828A Smart Body Fat Scale, iF2828A, Smart Body Fat Scale, Body Fat Scale, Fat Scale, Scale

References

User Manual