an open source synthesizer & sequencer, based on the Atmega328p.

An open source German Equitorial Mount for Astrophotography

Embedded Systems, C , Avr-C

Simple program written in ANSI C for arduino, I use Timer1 with ISR

Arduino Electronic Piano Keyboard written in ANSI C, not finished, idea is to use one input analog pin, and 8 buttons with some resistors, ideally for ATinny or some ESP

Arduino Blink LED, delay 2 sec, written in ANSI C

I2C program for addressing hardware Arduino EEPROM written in ANSI C

Interrupts written in ANSI C

Simple program written in ANSI C for arduino, uses PWM and Interrupt for controlling LED diode

Simple program written in ANSI C for arduino, uses PWM for controlling the LED diode - fade in, fade out

Simple program written in ANSI C for addressing WS2812B RGB ring, rotating desired effect

Цифров генератор на сигнали с тъчскрийн

Embedded Systems, C , Avr-C , I2C

Embedded Systems, C , Avr-C ,ZigBee

Arduino ADC. Install a voltage divider at the input. Change the value of the resistor and read the states of the AD converter

Simple program written in ANSI C for addressing WS2812B RGB ring, rainbow effect

[ECE NTUA] Assignments for the course microprocessors.

Simple program written in ANSI C for addressing WS2812B LED ring

"C_Hardware_UART.c" is a project showcasing hardware UART communication on an Atmel AVR microcontroller. It enables bidirectional data transmission and reception, demonstrating the implementation of a half-duplex serial communication channel. Useful for AVR-based projects requiring robust serial communication capabilities.