Nothing Special   »   [go: up one dir, main page]

skip to main content
10.5555/1953631guideproceedingsBook PagePublication PagesConference Proceedingsacm-pubtype
ICMTMA '11: Proceedings of the 2011 Third International Conference on Measuring Technology and Mechatronics Automation - Volume 02
2011 Proceeding
Publisher:
  • IEEE Computer Society
  • 1730 Massachusetts Ave., NW Washington, DC
  • United States
Conference:
January 6 - 7, 2011
ISBN:
978-0-7695-4296-6
Published:
06 January 2011

Reflects downloads up to 21 Nov 2024Bibliometrics
Abstract

No abstract available.

Article
Article
Article
Effect of Grinding Time on Microstructure of Porous Ceramics and Decolorizing Ability of Mmalachite Green

Taking diatomite as the main material, using the solid phase sintering process, diatomite-based porous ceramic whose median powder size and specific surface area of powder are 1.28um, 39.25m2/g, mean pore size of sintered body is 157.8nm respectively ...

Article
Effect of MgO Dopant on Structure and Performance of Mesocarbon Microbead

In the present work, using Tween 80 as dispersant, acryl amide as monomer, biscrylamide as cross linking, MgO (20 mesh particle size) and TiC (50 nanometre particle size) as do pants, mesocarbon micro bead (MCMB) green bodies and sintered bodies which ...

Article
Effects of Different Forms Inorganic Nitrogen on Aqueous Photolysis of Fipronil

The photo degradation of fipronil in aqueous with xenon lamp as light source was studied, and the effects of NO3-, NO2- and NH4+ on the photo degradation rate of fipronil were systematically investigated. The results showed that direct photolysis of ...

Article
Electromagnetic Active Vehicle Suspension System

A new type of electromagnetic linear actuator for vehicle active suspension is designed. Combined with the finite element analysis tool, the effect of actuator structure parameters and power parameters on actuator thrust response is studied. Based on ...

Article
Electromagnetic Compatibility Design of Intelligent Circuit Breaker

The work environment of control unit is not very well for intelligent circuit breaker, such as electromagnetic interference is one important factor. In this paper, hardware and software were applied as anti-Interference measures to ensure the ...

Article
Electro-mechanical Impedance Modeling for Health Monitoring of a Damaged Thin Plate

This paper presents an electro-mechanical impedance (EMI) model for damage identification of thin plate structures. Firstly, a damaged thin plate with a pair of piezoceramic (PZT) transducers bonded on the opposite sides is considered. And the pure ...

Article
Embedded Omni-vision Object Recognizing in Real-Time

This paper presents an embedded omni-vision Real-Time Object Recognizing system which involves collecting image and correction, the Freeman Chain Code methods, Field Programmable Gate Array (FPGA), Digital Signal Processor (DSP) and Private Compute (PC)...

Article
EMI Filter Design for Power Supplies

This paper introduces a method to design the external electromagnetic interference (EMI) filters for switching power supplies. The thesis expounds theory and calculates the filter insertion loss, then analyses the impact of the source impedance and the ...

Article
Emulation and Experimental Study of Drum Dynamometer for Simulating the Vehicle's Road Braking

The current drum dynamometer cannot test the vehicle’s dynamic braking performance. The equivalent moment of inertia test method was put forward to simulate the vehicle’s the road braking. A variable mass inertia wheel, whose moment of inertia was equal ...

Article
Energy Conservation and Emissions Reduction in Iron and Steel Industry

With the increasingly exhausting mineral resources and deteriorating environmental pollution, current steel making process structure must be optimized and new Iron making technology should be developed in China’s iron and steel industry to save energy ...

Article
Energy from Microbial Fuel Cells Constructed of Algae from Lake Taihu

Microbial fuel cells (MFCs) generate electricity using bacteria to degrade something and produce current, which have gained much attention. Harmful algae blooms(HABs) in lakes and rivers are on the increase all over the world, which becomes a more and ...

Article
Energy Saving Analysis of Air-conditioning System of an Existing Office Buildings in Shanghai

According to the present problems of existing office buildings using air source heat pump, countermeasures were brought forward to solve the problems, such as changing part of the present air source heat pumps to water-cooled cold water units, changing ...

Article
Energy Simulation Analysis of Solar Wall Heating and Ventilation System in Severe Cold Region

In order to analyze the volume of air, which meet air supply conditions, per centiare Solar Wall panel can heated, also verify the feasibility and energy-conservation effect of Solar Wall System in severe cold region of China, a 3D model was ...

Article
Enhanced Power Density and Decolorization of Air-cathode Single-chamber Microbial Fuel Cells with Microfiltration Membranes

In order to increase the power output and reduce the cost of MFCs, micro filtration membrane (MFM) air-cathode MFC (MFM-MFC) and proton exchange membrane (PEM) air-cathode MFC (PEM-MFC) were compared in the performance of the simultaneous decolorization ...

Article
Error Compensation Research for Macro/Micro Dual-drive System

The Macro/Micro Dual-drive experiment system with numerical control working platform is built. The ball screw drives the working platform macroscopic motion. The giant magnetostrictive actuator (GMA) is used to compensate the microcosmic motion error. ...

Article
Estimation Method for Civil Aviation Management Information System Based on an EWAA Operator

Estimation to civil aviation information system can improve the working efficiency and decrease the operation cost. This paper analyzes the importance of civil aviation management information system construction and its civil aviation feature, points ...

Article
Evaluating Factors Influencing Agricultural Households Willingness to Participate in Environment Productions

From the agricultural household point of view, in three productions theory, analysis agricultural production process of rural households participate in environmental and influencing factors of production willingness, rich three production theory at the ...

Article
Evaluation and Prediction of Driver Comfort Using Body Pressure Sensors

Information of pressure patterns at the driver-seat interface is very useful for the design of seats. However, a clear and consistent relationship between interface pressure and driver physiological state like comfort and discomfort was not identified. ...

Article
Evaluation and Programming Research for Sewage Heat Energy Reutilization

The resource and environment evaluation and programming were the necessary condition for healthy development of urban sewage heat energy re-utilization. This paper introduced the reconnaissance technology, resource evaluation, environment evaluation and ...

Article
Evaluation Method for Effective Resolution of Measurement System Based on Sub-pixel

In this paper, an evaluation method for effective resolution of measurement system is designed based on ANOVA and Correlation analysis. An evaluation platform based on this method is designed. Finally, constructs an machine vision detection system of ...

Article
Evaluation of Importance Level of Public Transit Terminal based on BA Scale-free Weighted Network

Based on current research and complex network theory, this paper compared the typical weighted network evolution models, and established the evolution model of gravity weighted network based on the BA scale-free network. Applying the model, the paper ...

Article
Exergy Analysis of Ice Storage Air-condition System Operating Strategy

Ice Storage air-condition can be used to shift electrical load from on-peak hours to off-peak hours, which can bring mutual benefits to power supplier and consumers. The exergy analysis of ice storage air-condition systems with different operating ...

Article
Experiment Data Processing by Introducing Integration Gray Regression Model and Its Application

The primary cause of test errors, in many instances, is relevant to the phenomenon that the quantity of experiment samples, especially in the engineering test with destructive effect, cannot meet the minimum required sample capacity ruled by the ...

Article
Experiment Research and Finite Element Analysis of 30Cr2Ni4MoV Steel Porosity Consolidating

In this paper, distribution and pattern of the microcosmic porosity in 30Cr2Ni4MoV steel were researched quantificationally by metallographic analysis. Initial relative density of the defect zone was calculated. Porosity model was used to simulate the ...

Index Terms

  1. Proceedings of the 2011 Third International Conference on Measuring Technology and Mechatronics Automation - Volume 02
        Index terms have been assigned to the content through auto-classification.
        Please enable JavaScript to view thecomments powered by Disqus.

        Recommendations