default search action
IEEE Transactions on Control Systems Technology, Volume 9
Volume 9, Number 1, January 2001
- Robert B. Gorbet, Kirsten A. Morris, David W. L. Wang:
Passivity-based stability and control of hysteresis in smart actuators. 5-16 - Juan Manuel Cruz-Hernández, Vincent Hayward:
Phase control approach to hysteresis reduction. 17-26 - Henri P. Gavin:
Control of seismically excited vibration using electrorheological materials and Lyapunov methods. 27-36 - Dunant Halim, S. O. Reza Moheimani:
Spatial resonant control of flexible structures-application to a piezoelectric laminate beam. 37-53 - Sumiko Majima, Kazuyuki Kodama, Tadahiro Hasegawa:
Modeling of shape memory alloy actuator and tracking control system with the model. 54-59 - Sridhar Sana, Vittal S. Rao:
Robust control of input limited smart structural systems. 60-68 - Timothy N. Chang, Xuemei Sun:
Analysis and control of monolithic piezoelectric nano-actuator. 69-75 - Randolph Cabell, Daniel L. Palumbo, Jeffrey S. Vipperman:
A principal component feedforward algorithm for active noise control: flight test results. 76-83 - Sungsoo Rhim, Wayne J. Book:
Noise effect on adaptive command shaping methods for flexible manipulator control. 84-92 - Sang-Myeong Kim, Stephen J. Elliott, Michael J. Brennan:
Decentralized control for multichannel active vibration isolation. 93-100 - Harshad S. Sane, Ravinder Venugopal, Dennis S. Bernstein:
Disturbance rejection using self-tuning ARMARKOV adaptive control with simultaneous identification. 101-106 - Chun-Liang Lin, Yi-Hsing Hsiao:
Adaptive feedforward control for disturbance torque rejection in seeker stabilizing loop. 108-121 - Ching-An Lin, Yaw-Kuen Jan:
Control system design for a rapid thermal processing system. 122-129 - George T.-C. Chiu, Masayoshi Tomizuka:
Contouring control of machine tool feed drive systems: a task coordinate frame approach. 130-139 - Michael S. Holmes, Asok Ray:
Fuzzy damage-mitigating control of a fossil power plant. 140-147 - Luigi Scibile, Basil Kouvaritakis:
A discrete adaptive near-time optimum control for the plasma vertical position in a Tokamak. 148-162 - Egils Sviestins, Torbjörn Wigren:
Nonlinear techniques for Mode C climb/descent rate estimation in ATC systems. 163-174 - Hoang Duong Tuan, Eiichi Ono, Pierre Apkarian, Shigeyuki Hosoe:
Nonlinear H∞ control for an integrated suspension system via parameterized linear matrix inequality characterizations. 175-185 - Richard B. Vilim, Humberto E. Garcia, Frederick W. Chen:
An identification scheme combining first principle knowledge, neural networks, and the likelihood function. 186-199 - Marc Bodson, Jonathan S. Jensen, Scott C. Douglas:
Active noise control for periodic disturbances. 200-205
Volume 9, Number 2, March 2001
- N. R. Harland, Brian R. Mace, R. W. Jones:
Adaptive-passive control of vibration transmission in beams using electro/magnetorheological fluid filled inserts. 209-220 - Teck B. Goh, Zhongming Li, Ben M. Chen, Tong Heng Lee, Tony Huang:
Design and implementation of a hard disk drive servo system using robust and perfect tracking approach. 221-233 - Chen-Yuan Kuo, Didik Soetanto, Ying-Chwan Chiou:
Geometric analysis of flight control command for tactical missile guidance. 234-243 - Kok Kiong Tan, Huifang Dou, YangQuan Chen, Tong Heng Lee:
High precision linear motor control via relay-tuning and iterative learning based on zero-phase filtering. 244-253 - Dan J. Trudnowski, Warren L. McReynolds, Jeffery M. Johnson:
Real-time very short-term load prediction for power-system automatic generation control. 254-260 - George A. Rovithakis, Stelios E. Perrakis, Manolis A. Christodoulou:
Application of a neural-network scheduler on a real manufacturing system. 261-270 - I. Gary Rosen, Tyler Parent, Carolyn Cooper, Ping Chen, Anupam Madhukar:
A neural-network-based approach to determining a robust process recipe for the plasma-enhanced deposition of silicon nitride thin films. 271-284 - Elena Grassi, Kostas Tsakalis, Sachi Dash, Sujit V. Gaikwad, Ward MacArthur, Gunter Stein:
Integrated system identification and PID controller tuning by frequency loop-shaping. 285-294 - Jianming Yang, Yoshikazu Suematsu, Zibo Kang:
Two-degree-of-freedom controller to reduce the vibration of vehicle engine-body system. 295-304 - Ti-Chung Lee, Kai-Tai Song, Ching-Hung Lee, Ching-Cheng Teng:
Tracking control of unicycle-modeled mobile robots using a saturation feedback controller. 305-318 - Ilker Tunay, Ervin Y. Rodin, Arnold A. Beck:
Modeling and robust control design for aircraft brake hydraulics. 319-329 - Robert Richardson, Andrew R. Plummer, Michael D. Brown:
Self-tuning control of a low-friction pneumatic actuator under the influence of gravity. 330-334 - Dongkyoung Chwa, Jin Young Choi:
New parametric affine modeling and control for skid-to-turn missiles. 335-347 - Shouping Guan, Han-Xiong Li, S. K. Tso:
Multivariable fuzzy supervisory control for the laminar cooling process of hot rolled slab. 348-356 - Biao Huang:
Detection of abrupt changes of total least squares models and application in fault detection. 357-367 - Mohamed Bouri, Daniel Thomasset:
Sliding control of an electropneumatic actuator using an integral switching surface. 368-375 - Diego Del Gobbo, Marcello R. Napolitano, Parviz Famouri, Mario Innocenti:
Experimental application of extended Kalman filtering for sensor validation. 376-380 - Raymond A. de Callafon, Paul M. J. Van den Hof:
Multivariable feedback relevant system identification of a wafer stepper system. 381-390 - Gilead Tadmor:
Dissipative design, lossless dynamics, and the nonlinear TORA benchmark example. 391-398 - Brian Armstrong, David Neevel, Todd Kusik:
New results in NPID control: Tracking, integral control, friction compensation and experimental results. 399-406 - Perry Y. Li, Sohail A. Dianat:
Robust stabilization of tone reproduction curves for the xerographic printing process. 407-415 - Hubert Hahn, Mathias Niebergall:
Development of a measurement robot for identifying all inertia parameters of a rigid body in a single experiment. 416-423
Volume 9, Number 3, May 2001
- Anupam Gangopadhyay, Peter H. Meckl:
Extracting physical parameters from system identification of a natural gas engine. 425-434 - Philip A. Wisnewski, Francis J. Doyle III:
Model-based predictive control studies for a continuous pulp digester. 435-444 - Efrain O. Morales, Marios M. Polycarpou, Nat Hemasilpin, John J. Bissler:
Hierarchical adaptive and supervisory control of continuous venovenous hemofiltration. 445-457 - Xiaochun George Wang, Chris Kyung-Hyun Kim:
Improved control of pneumatic lumber-handling systems. 458-472 - Seongjin Choi, James F. Antaki, J. Robert Boston, Douglas Thomas:
A sensorless approach to control of a turbodynamic left ventricular assist system. 473-482 - Ken'ichi Yano, Kazuhiko Terashima:
Robust liquid container transfer control for complete sloshing suppression. 483-493 - Yixin Diao, Kevin M. Passino:
Stable fault-tolerant adaptive fuzzy/neural control for a turbine engine. 494-509 - Christos G. Panayiotou, Christos G. Cassandras:
A sample path approach for solving the ground-holding policy problem in air traffic control. 510-523 - Ilya V. Kolmanovsky, Anna G. Stefanopoulou:
Optimal control techniques for assessing feasibility and defining subsystem level requirements: an automotive case study. 524-534 - Weng Khuen Ho, T. H. Lee, H. P. Han, Y. Hong:
Self-tuning IMC-PID control with interval gain and phase margins assignment. 535-541 - Hamid R. Berenji, Sujit Saraf, Ping-Wei Chang, Steven Swanson:
Pitch control of the space shuttle training aircraft. 542-551
Volume 9, Number 4, July 2001
- Rajesh Rajamani, Adam S. Howell, Chieh Chen, J. Karl Hedrick, Masayoshi Tomizuka:
A complete fault diagnostic system for automated vehicles operating in a platoon. 553-564 - Sergio Bittanti, Francesco Alessandro Cuzzola, Fabrizio Lorito, Guido Poncia:
Compensation of nonlinearities in a current transformer for the reconstruction of the primary current. 565-573 - Alessandro Beghi:
An application of selective modal analysis to tokamak modeling and control. 574-589 - Torbjörn Norlander, Pertti M. Mäkilä:
Defragilization in optimal design and its application to fixed structure LQ controller design. 590-598 - T. X. Mei, Roger M. Goodall:
Robust control for independently rotating wheelsets on a railway vehicle using practical sensors. 599-607 - Tamer Inanc, Mario Sznaier, Pablo A. Parrilo, Ricardo S. Sánchez Peña:
Robust identification with mixed parametric/nonparametric models and time/frequency-domain experiments: theory and an application. 608-617 - Wu-Chung Su, Ching-Chih Tsai:
Discrete-time VSS temperature control for a plastic extrusion process with water cooling systems. 618-623 - Robert S. H. Istepanian, Jun Wu, James F. Whidborne:
Controller realizations of a teleoperated dual-wrist assembly system with finite word length considerations. 624-628 - Henrik Olsson, Karl Johan Åström:
Friction generated limit cycles. 629-636 - Gerardo Escobar, D. Chevreau, Romeo Ortega, Eduardo Mendes:
An adaptive passivity-based controller for a unity power factor rectifier. 637-644 - Matthew G. Feemster, P. Aquino, Darren M. Dawson, Aman Behal:
Sensorless rotor velocity tracking control for induction motors. 645-653 - M. Collet:
Shape optimization of piezoelectric sensors dealing with spill-over instability. 654-662 - Kok Kiong Tan, Sunan Huang, Xi Jiang:
Adaptive control of ram velocity for the injection moulding machine. 663-671 - Faa-Jeng Lin, Rong-Jong Wai, Chun-Ming Hong:
Identification and control of rotary traveling-wave type ultrasonic motor using neural networks. 672-680
Volume 9, Number 5, September 2001
- Farhad Aghili, Martin Buehler, John M. Hollerbach:
Motion control systems with H∞ positive joint torque feedback. 685-695 - Darío H. Baldelli, Maria Cecilia Mazzaro, Ricardo S. Sánchez Peña:
Robust identification of lightly damped flexible structures by means of orthonormal bases. 696-707 - Charalabos C. Doumanidis, Nikolaos Fourligkas:
Temperature distribution control in scanned thermal processing of thin circular parts. 708-717 - Gerardo Escobar Valderrama, Paolo Mattavelli, Alex M. Stankovic:
Reactive power and imbalance compensation using STATCOM with dissipativity-based control. 718-727 - M. Gaffney Flynn, Roy S. Smith, Patrick Abraham, Steven P. DenBaars:
Control of a III-V MOCVD process using ultraviolet absorption and ultrasonic concentration monitoring. 728-740 - Alexander G. Parlos, Sanjay Parthasarathy, Amir F. Atiya:
Neuro-predictive process control using online controller adaptation. 741-755 - Gianluca Antonelli, Stefano Chiaverini, Nilanjan Sarkar, Michael West:
Adaptive control of an autonomous underwater vehicle: experimental results on ODIN. 756-765 - David L. Ma, Richard D. Braatz:
Worst-case analysis of finite-time control policies. 766-774
Volume 9, Number 6, November 2001
- Randal W. Beard, Jonathan R. Lawton, Fred Y. Hadaegh:
A coordination architecture for spacecraft formation control. 777-790 - Sang Yeal Lee, Hyung Suck Cho:
A fuzzy controller for an aeroload simulator using phase plane method. 791-801 - Xiaoqiu Li, Stephen Yurkovich:
Sliding mode control of delayed systems with application to engine idle speed control. 802-810 - Vladan Petrovic, Romeo Ortega, Alex M. Stankovic:
Interconnection and damping assignment approach to control of PM synchronous motors. 811-820 - R. Krishna Kumar, S. K. Sinha, A. K. Lahiri:
An online parallel controller for the runout table of hot strip mills. 821-830 - Giuseppe Ambrosino, Marco Ariola, Alfredo Pironti, Alfredo Portone, Michael L. Walker:
A control scheme to deal with coil current saturation in a Tokamak. 831-838
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.