1.
|
Fabrication and Assembly of the $Nb_3Sn$ Dipole Magnet FRESCA2
/ Rochepault, Etienne (CERN) ; Bourcey, Nicolas (CERN) ; Ferracin, Paolo (CERN) ; Gauthier, Remy (CERN) ; Manil, Pierre (IRFU, Saclay) ; Maury, Gregory (CERN) ; Perez, Juan Carlos (CERN) ; Rifflet, J M (IRFU, Saclay) ; de Rijk, Gijs (CERN) ; Rondeaux, Francoise (IRFU, Saclay) et al.
The FRESCA2 Dipole Magnet is developed within the framework of a collaboration between CEA Saclay and CERN, in the continuity of the European project EuCARD. The goal is to manufacture a dipole magnet providing a 13 T magnetic field in a 100 mm aperture for a superconducting cable test station at CERN. [...]
2017 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 9500205
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.9500205
|
|
2.
|
Assembly of the Nb$_{3}$Sn dipole magnet FRESCA2
/ Bourcey, Nicolas (CERN) ; Carlon Zurita, Alejandro (CERN) ; Durante, Maria (Saclay) ; Ferracin, Paolo (CERN) ; Ferradas, Jose (CERN) ; Gauthier, Remy (CERN) ; Grosclaude, Philippe (CERN) ; Manil, Pierre (Saclay) ; Peray, Nicolas (CERN) ; Perez, Juan Carlos (CERN) et al.
The Nb$_{3}$Sn dipole magnet FRESCA2 has been developed and manufactured within the framework of a collaboration between the Centre for Atomic Energy (CEA Saclay) and the European Organization for Nuclear Research (CERN). The aim of the magnet is to upgrade the superconducting cable test station at CERN with a Nb$_{3}$Sn dipole providing a 13-T magnetic field in a 100-mm aperture. [...]
2018 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4007505
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4007505
|
|
3.
|
“Block-Type” Coils Fabrication Procedure for the Nb$_3$Sn Dipole Magnet FRESCA2
/ Rondeaux, F (Saclay) ; Ferracin, P (CERN) ; Durante, M (Saclay) ; Gauthier, R (CERN) ; Manil, P (Saclay) ; Munoz Garcia, J E (Saclay) ; Perez, J C (CERN) ; Rifflet, J -M (Saclay) ; de Rijk, G (CERN) ; Rochepault, E (CERN) et al.
The Nb$_3$Sn FRESCA2 dipole magnet is dedicated
to upgrade the CERN cable test facility FRESCA. It is also a
technological demonstrator of large-aperture Nb$_3$Sn accelerator
magnet. [...]
2016 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4002405
|
|
4.
|
16 T Nb$_{3}$Sn Racetrack Model Coil Test Result
/ Perez, J C (CERN) ; Bajas, H (CERN) ; Bajko, M (CERN) ; Bottura, L (CERN) ; Bordini, B (CERN) ; Chiuchiolo, A (CERN) ; De Rijk, G (CERN) ; Ferracin, P (CERN) ; Feuvrier, J (CERN) ; Grosclaude, P (CERN) et al.
In the framework of the European project EuCARD, the High Field Magnet project, led by a CERN-CEA collaboration, implied the development of a large aperture Nb$_{3}$Sn dipole magnet called FRESCA2. The magnet uses four double-pancake block-type coils, each about 1.5 m long. [...]
2016 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4004906
In : 24th International Conference on Magnet Technology, Seoul, Korea, 18 - 23 Oct 2015, pp.4004906
|
|
5.
|
F2D2: A block-coil short-model dipole toward FCC
/ Felice, Helene (IRFU, Saclay) ; Calvelli, Valerio (IRFU, Saclay) ; Durante, Maria (IRFU, Saclay) ; Mallon, Philip (IRFU, Saclay) ; Manil, Pierre (IRFU, Saclay) ; Millot, Jean-Francois (IRFU, Saclay) ; Minier, Gilles (IRFU, Saclay) ; Rochepault, Etienne (IRFU, Saclay) ; Bord, Alexandre (U. Lorraine) ; Perraud, Simon (IRFU, Saclay) et al.
In the framework of the Future Circular Collider (FCC) program, and in collaboration with CERN, CEA is developing a 1.5-m-long single aperture Nb$_3$Sn block dipole. The so-called FCC Flared-end Dipole Demonstrator (F2D2) will produce at least 15 T with 14% margin at 1.9 K and will be assembled in a shell-based support structure. [...]
2019 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4001807
|
|
6.
|
Cold Powering Tests and Protection Studies of the FRESCA2 100 mm Bore Nb$_{3}$Sn Block-Coil Magnet
/ Willering, G (CERN) ; Petrone, C (CERN) ; Bajko, M (CERN) ; Bajas, H (CERN) ; Bordini, B (CERN) ; Bottura, L (CERN) ; Bourcey, N (CERN) ; Duda, M (CERN ; Cracow, INP) ; Ferracin, P (CERN) ; Feuvrier, J (CERN) et al.
The Nb3Sn block-coil dipole magnet FRESCA2 was developed within the framework of a collaboration between CEA Saclay and CERN, follow up of the European project EuCARD. The magnet is aimed at upgrading the cable test facility at CERN to a bore field of 13 T at 10.6 kA in an aperture of 100 mm as deliverable. [...]
2018 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4005105
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4005105
|
|
7.
|
R2D2, the CEA Graded Nb$_3$Sn Research Racetrack Dipole Demonstrator Magnet
/ Calvelli, Valerio (IRFU, Saclay) ; Mallon, Philip (LBNL, Berkeley) ; Durante, Maria (IRFU, Saclay) ; Felice, Helene (IRFU, Saclay) ; Rochepault, Etienne (IRFU, Saclay) ; Manil, Pierre (IRFU, Saclay) ; Minier, Gilles (IRFU, Saclay) ; Rifflet, Jean-Michel (IRFU, Saclay) ; Perez, Juan (CERN)
As a part of a collaborative effort with CERN on the long road to FCC-hh, CEA is developing a 1.4 m-long single aperture short dipole demonstrator. This Nb$_3$Sn block dipole, named F2D2, is foreseen to produce 15.5 T with a 14% margin at 1.9 K, and will use a shell-based support structure. [...]
2021 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 1-6
|
|
8.
|
|
9.
|
Mechanical Analysis of the FRESCA2 Dipole During Preload, Cool-Down, and Powering
/ Rochepault, Etienne (CERN ; IRFU, Saclay) ; Bourcey, Nicolas (CERN) ; Ferracin, Paolo (CERN) ; Guinchard, Michael (CERN) ; Grosclaude, Philippe (CERN) ; Manil, Pierre (IRFU, Saclay) ; Perez, Juan Carlos (CERN) ; Rifflet, Jean-Michel (IRFU, Saclay) ; de Rijk, Gijs (CERN) ; Rondeaux, Francoise (IRFU, Saclay) et al.
The FRESCA2 dipole magnet is being developed within a collaboration between CEA Saclay and CERN. The main goal of the magnet is to provide a 13 T nominal bore field into a clear aperture of 100 mm diameter, for the second generation cable test facility FRESCA2 at CERN. [...]
2018 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4002905
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4002905
|
|
10.
|
Magnetic and mechanical design of a 15-T large aperture dipole magnet for cable testing
/ Sarasola, Xabier (Ecole Polytechnique, Lausanne) ; Bruzzone, Pierluigi (Ecole Polytechnique, Lausanne) ; Bottura, Luca (CERN) ; Ferracin, Paolo (CERN) ; Araujo, Douglas Martins (CERN) ; de Rijk, Gijs (CERN) ; Cau, Francesca (Fusion for Energy, Barcelona) ; Portone, Alfredo (Fusion for Energy, Barcelona) ; Testoni, Pietro (Fusion for Energy, Barcelona) ; Prestemon, Soren (LBNL, Berkeley) et al.
A large aperture Nb$_3$Sn dipole is proposed to replace the magnet assembly of EDIPO, which was irreversibly damaged in 2016. The goal is to generate a background field of 15 T at 4.2 K in a clear aperture of approximately 100×150 mm$^2$ and over a uniform length of 1000 mm in order to test superconducting cables for both fusion and high-energy physics applications. [...]
2019 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4001405
|
|