Requisition Procedure

REQUISITION PROCEDURE
The information that follows will teach you how to accomplish the form in order to acquire materials.
Procedure:
 State the name of the project and date when you requested for materials.
 Fill in the classification of the project and its purpose.
 Write the number of required materials.
 List the unit of materials to be requisitioned.
 Enumerate the materials with their description.
 List the cost per unit and the total cost.
 Write your name as requisitioner.
 Secure the approval of authorities concerned.
FLOW CHART IN RECEIVING TOOLS,
EQUIPMENT, SUPPLIES, AND MATERIALS IN
THE SHOP
CLASSIFICATION OF
HANDTOOLS
Measuring tools
 Pull-Push Rule- flexible tape that slides into a material case and it is used to
measure irregular and regular shapes.
 Ruler - 12-inch or one-foot rule and it is used to take/make simple
measurements.
 Meter Stick - used to measure a work piece.
 Try Square - squaring, measuring and testing tool used to check adjacent
surfaces for squareness.
 Caliper - used to transfer measurements from the rule to the work.
MARKING LINING TOOLS
 Pencil - used to layout or mark cutting lines.

 Marking Gauge - wood or metal tool consisting of a beam, head and a
point used to mark a line parallel to the grain of the wood.
 Chalk Line - used to establish a straight line on a surface.
 Divider - tool with two metal legs used to lay-out an arc circle or step off
division on a line.
 Compass - used to scribe arcs and circle in a metal wood.
TESTING TOOLS
Try Square - tool used in squaring, measuring and testing the

squareness of a wood.
Steel Square - framing square used to mark out the work for
squaring and checking of angles and is used in the construction of
roof framing and large furniture.
Spirit Level - tool used for testing vertical and horizontal surfaces.
Plumb bob - tool used to test the vertical and horizontal surfaces.
EDGE CUTTING TOOLS
Chisel - tool used to trim and shape wood.

Plane - used to obtain a smooth and flat surface.
Spoke shave - small plane like tool from irregularly
shaped objects.
Cabinet scraper - rectangular piece of steel with two
cutting edges used for working flat and curved shapes.
TOOTH-CUTTING TOOLS
 Cross Cut Saw - handsaw used to cut the wood across the grain.
 Rip-saw - hand saw used to cut the wood along the grain.
 Back Saw - handsaw with a metal back and plywood and joinery.
 Compass Saw - used to cut irregular shape either in large or small board.
 Turning Saw - used to rip, cross and cut curves in lumber.
 Coping Saw - u-shaped saw used for cutting irregular shape in small board.
 Dovetail Saw - small back saw with a straight chisel type handle used to
cut very fine joints.
BORING TOOLS
Auger bit - tool used to make hole in woods.

Expansive bit - tool used to drill holes of
various sizes in woods.
Drill Bit - tool used for boring holes either in
metals, woods or plastics.
HOLDING TOOLS
C-Clamp - used for holding together pieces of lumber while

working.
Bench Vise - used to hold any materials or tools in place.
Bar Clamp - used to hold large boards or frames together while
assembling or gluing.
MISCELLANEOUS TOOLS
Oil Stone - used for sharpening edge cutting tools such as chisel.
Files - used to smoothen metal and wood surfaces.
Paint Brush- used to apply paint or varnish on wood surfaces
Nail Set - used to drive the head of nails lower than surface of
wood.
Saw Set - used to bend the upper half of each tooth to one side
or the other to form a set.
PORTABLE POWERTOOLS
 Sander - portable power tool used for sanding furniture pieces.

 Router - used for shaping surfaces and edges of furniture parts.
 Jigsaw - power tool used primarily for cutting curved or irregular shapes of
wood surfaces.
 Circular saw - power saw used for many types of cutting, particularly on
large panel stock.
 Electric Drill - power drill which is used to drill holes in various materials
to perform a multitude of tasks.
PPE (Personal Protective Equipment)
 Goggles - used to protect the eyes against flying debris and harmful liquids.
 Ear Protector - used to protect the ears against high frequency noise.
 Face Mask - used to prevent the inhalation of sprayed paint fumes.
 Gloves - used to protect the hands while working.
 Apron - used to protect the worker against flying debris.
DRIVING TOOLS
Claw Hammer - used to drive and pull out nails on wooden

surfaces.
Mallet - made out of wood or rubber used to drive other tools
like chisel.
Nail Set - used in setting the head of a finishing nail below the
surface of the wood.
Screw Driver - used to drive and loose screws.

Requisition Procedure

Uploaded by

Copyright:

Available Formats

Requisition Procedure

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Requisition Procedure

Uploaded by

Copyright:

Available Formats

REQUISITION PROCEDURE

 Pencil - used to layout or mark cutting lines.

Try Square - tool used in squaring, measuring and testing the

Chisel - tool used to trim and shape wood.

Auger bit - tool used to make hole in woods.

C-Clamp - used for holding together pieces of lumber while

 Sander - portable power tool used for sanding furniture pieces.

Claw Hammer - used to drive and pull out nails on wooden

You might also like