Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    2017 National Civil Engineering Quiz: University of The Philippines - Diliman Association of Civil Engineering Students

    Uploaded by

    mateojullieanne
    This document contains a quiz with questions from various fields of civil engineering. It includes 20 multiple choice or short answer questions testing knowledge in areas like engineering science, transportation engineering, structural engineering, water resources engineering, environmental engineering, and construction management. The questions cover topics such as Newton's second law, traffic signs, surveying errors, required concrete cover, fluid mechanics properties, drainage calculations, and construction defects. The quiz also includes a section on scheduling with a critical path problem to solve.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    2017 National Civil Engineering Quiz: University of The Philippines - Diliman Association of Civil Engineering Students

    Uploaded by

    mateojullieanne
    1K views54 pages
    This document contains a quiz with questions from various fields of civil engineering. It includes 20 multiple choice or short answer questions testing knowledge in areas like engineering science, transportation engineering, structural engineering, water resources engineering, environmental engineering, and construction management. The questions cover topics such as Newton's second law, traffic signs, surveying errors, required concrete cover, fluid mechanics properties, drainage calculations, and construction defects. The quiz also includes a section on scheduling with a critical path problem to solve.

    Original Description:

    Original Title

    Quiz bee round 4

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains a quiz with questions from various fields of civil engineering. It includes 20 multiple choice or short answer questions testing knowledge in areas like engineering science, transportation engineering, structural engineering, water resources engineering, environmental engineering, and construction management. The questions cover topics such as Newton's second law, traffic signs, surveying errors, required concrete cover, fluid mechanics properties, drainage calculations, and construction defects. The quiz also includes a section on scheduling with a critical path problem to solve.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    1K views54 pages

    2017 National Civil Engineering Quiz: University of The Philippines - Diliman Association of Civil Engineering Students

    Uploaded by

    mateojullieanne
    This document contains a quiz with questions from various fields of civil engineering. It includes 20 multiple choice or short answer questions testing knowledge in areas like engineering science, transportation engineering, structural engineering, water resources engineering, environmental engineering, and construction management. The questions cover topics such as Newton's second law, traffic signs, surveying errors, required concrete cover, fluid mechanics properties, drainage calculations, and construction defects. The quiz also includes a section on scheduling with a critical path problem to solve.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 54

    2017 NATIONAL CIVIL

    ENGINEERING QUIZ
    University of the Philippines – Diliman
    Association of Civil Engineering Students
    Easy Round
    ENGINEERING SCIENCE
    Newton’s second law states that Force is directly
    proportional to the product of the mass and the
    acceleration a body has. What principle governs this
    law?
    D’ Alembert’s Principle
    TRANSPORTATION
    ENGINEERING
    What does this warning sign mean?
    Right Lane Ends
    ENGINEERING SURVEYING
    These are inaccuracies in measurements which occur because some aspect of a
    surveying operation is performed by the surveyor with carelessness, inattention,
    poor judgement, and improper execution.

    a. Mistakes
    b. Errors
    c. Mismanagement
    d. Idiocy
    A. Mistakes
    STRUCTURAL ENGINEERING
    According to the National Structural Code of the Philippines 2010,
    which of the following is the required minimum clear cover for walls
    with bar diameter not greater than 32mm?
    20mm
    ENGINEERING MECHANICS
    It is a point through which if the external load passes, then there
    will not be any twisting of the section, that is, the section will only
    be subjected to bending and not to torsion.
    Shear Center
    CONSTRUCTION
    ENGINEERING AND
    MANAGEMENT
    It is the Republic Act number of the Government
    Procurement Reform Act
    Republic Act No. 9184
    ENGINEERING SCIENCE
    What is the mass moment of inertia of a thin
    disk with a mass “m” and radius “r”.
    1
     

    2
    𝐼= 𝑚 𝑟
    2
    ENGINEERING SCIENCE
    It is the measurement of mass in motion.
    Momentum
    ENGINEERING MATHEMATICS
    Find a differential equation satisfied by the family of
    parabolas having their vertices at the origin and their
    foci on the y-axis.
     
    ′
    𝑥 𝑦 − 2 𝑦 =0
    FLUID MECHANICS
    A liquid which is compressed in a cylinder having a volume
    of 1 liter at one MN/m2 and a volume of 995 cm3 at 2
    MN/m2. Determine its bulk modulus of elasticity.
    E = 200.00 MPa
    Average Round
    WATER RESOURCES
    ENGINEERING
    Two rectangular channels have the following parameters:

    Breadth Flow (cu.m./sec)


    (meters)
    Channel A 10 20
    Channel B 8 20

    If the allowable depth for a certain channel is 0.50m, which


    channel type is safe and acceptable?
    None
    GEOTECHNICAL
    ENGINEERING
     
    The maximum stress that causes the failure of a cohesive
    soil specimen in a tri-axial test is equal to 220kPa. The
    angle of friction is equal to 25. If the deviator stress at
    failure is equal to 140kPa, determine the cohesion of the
    soil. Express your answer in kPa.
    7.29 kPa
    ENGINEERING SURVEYING
    It is a curved surface which is at any point perpendicular
    to the direction of gravity or the plumb line.

    a. Level Surface
    b. Horizontal Surface
    c. Mean Sea Surface
    d. Both A and B
    A. Level Surface
    WATER RESOURCES
    ENGINEERING
     
    A water tower is approximated by a 15-m diameter sphere mounted
    on a 1-m diameter rod, 20 meters long. Assuming that the density of
    the air is 1.2255 kg/m3 and hurricane winds of 40m/s, determine the
    drag force acting on the sphere assuming that Express your answer
    in kN.
    34.65kN
    WATER RESOURCES
    ENGINEERING
    If precipitation is 32cm, basin recharge is 10cm,
    and groundwater accretion is 6cm, what is the
    direct run-off? Express your answer in
    centimeters.
    16.00 cm
    ENGINEERING SCIENCE
    It is defined as the ratio of the relative velocities of
    colliding bodies after impact to their relative
    velocities before impact.
    𝐶𝑜𝑓𝑓𝑖𝑐𝑖𝑒𝑛𝑡 𝑜𝑓 𝑅𝑒𝑠𝑡𝑖𝑡𝑢𝑡𝑖𝑜𝑛
     
    STRUCTURAL ENGINEERING
    A rectangular beam has a width of 260mm and an overall
    depth of 470mm. Concrete cover is 60mm from the
    centroid of bars. Concrete compressive strength f’c =
    21MPa. Steel yield strengths are 415MPa for longitudinal
    bars and 275MPa for hoops. Determine the shear strength
    provided by the concrete using simplified equation if the
    beam is subjected to axial compressive force of 80kN.
    86.93 kN
    STRUCTURAL ENGINEERING
    These are structural members used to support
    columns or walls and transmit their load to the
    underlying soils.
    Footings
    STRUCTURAL ENGINEERING
    A simply-supported beam having a span of 6 meters
    is subjected to a ultimate uniform load of 20kN/m. It
    is made of reinforced concrete with a breadth of
    300mm, and an effective depth of 450mm. Determine
    the ultimate shear of the reinforced concrete beam.
    51.00kN
    TRANSPORTATION
    ENGINEERING
    What does this sign
    mean?
    Hill Warning Sign
    Difficult Round
    CONSTRUCTION
    ENGINEERING AND
    MANAGEMENT
    Activity Predecess Duration Early Early Late Late
    or Start Finish Start Finish
    A - 4 0 4 2 6
    Determine the B - 5 0 5 0 5
    C A 6 4 10 6 12
    activity with the D B 7 5 12 5 12
    greatest number E C 8 10 18 12 20
    of free float. F C 6 10 16 12 18
    G D 6 12 18 12 18
    H E 10 18 28 20 30
    I F,G 12 18 30 18 30
    J H,I 20 30 50 30 50
    Activities F and H
    ENVIRONMENTAL
    ENGINEERING
    What is the equivalent weight of NaOH?

    Molecular weight:
    Na = 23g
    O=16g
    H=1g
    40g/mole
    ENVIRONMENTAL
    ENGINEERING
    The 3-day BOD3 (Biochemical Oxygen Demand) of
    a waste is 80mg/L and the BOD decay constant k is
    0.236/day. What is the ultimate BOD?
    157.68 mg/L
    WATER RESOURCES
    ENGINEERING
    Determine the missing rainfall data of a station using normal annual
    precipitation.
    Rainfall (mm) Normal Annual Precipitation (mm)
    114.3 1673.1
    129.6 1955.2
    - 1721.5
    120.1 1800.9
    115.51
    CONSTRUCTION
    ENGINEERING AND
    MANAGEMENT
    It refers to the deposition of the white slats on the
    concrete surface caused by impurities on the water.
    Efflorescence

    You might also like