Heat and Mass Transfer: Fundamentals & Applications

Fourth Edition
Yunus A. Cengel, Afshin J. Ghajar
McGraw-Hill, 2011

Chapter 7
EXTERNAL FORCED
CONVECTION

Abdul moiz Dota

Dept.Food Engineering
University of Agriculture Faisalabad
 Objectives
• Distinguish between internal and external flow
• Develop an intuitive understanding of friction drag and
pressure drag, and evaluate the average drag and
convection coefficients in external flow
• Evaluate the drag and heat transfer associated with
flow over a flat plate for both laminar and turbulent flow
• Calculate the drag force exerted on cylinders during
cross flow, and the average heat transfer coefficient
• Determine the pressure drop and the average heat
transfer coefficient associated with flow across a tube
bank for both in-line and staggered configurations

2
DRAG AND HEAT TRANSFER IN EXTERNAL FLOW
• Fluid flow over solid bodies frequently
occurs in practice such as the drag force
acting on the automobiles, power lines,
trees, and underwater pipelines; the lift
developed by airplane wings; upward
draft of rain, snow, hail, and dust particles
in high winds; and the cooling of metal or
plastic sheets, steam and hot water pipes,
and extruded wires.
• Free-stream velocity: The velocity of the
fluid relative to an immersed solid body
sufficiently far from the body.
• It is usually taken to be equal to the
upstream velocity V (approach
velocity) which is the velocity of the
approaching fluid far ahead of the body.
• The fluid velocity ranges from zero at the
surface (the no-slip condition) to the free-
stream value away from the surface. 3
Friction and Pressure Drag
• Drag: The force a flowing fluid exerts on a
body in the flow direction.
• The components of the pressure and wall
shear forces in the normal direction to flow tend
to move the body in that direction, and their
sum is called lift.
• Both the skin friction (wall shear) and pressure
contribute to the drag and the lift.

4
The drag force FD depends on the density of the fluid, the upstream velocity V,
and the size, shape, and orientation of the body, among other things.
The drag characteristics of a body is represented by the dimensionless drag
coefficient CD defined as

The part of drag that is due directly to wall

shear stress w is called the skin friction drag
(or just friction drag) since it is caused by
frictional effects, and the part that is due
directly to pressure P is called the pressure
drag.

5
• At low Reynolds numbers, most drag is
due to friction drag.
• The friction drag is proportional to the
surface area.
• The pressure drag is proportional to the
frontal area and to the difference
between the pressures acting on the
front and back of the immersed body.
• The pressure drag is usually dominant
for blunt bodies and negligible for
streamlined bodies.
• When a fluid separates from a body, it
forms a separated region between the Wake: The region of flow trailing
body and the fluid stream. the body where the effects of the
• Separated region: The low-pressure body on velocity are felt.
region behind the body here recirculating Viscous and rotational effects are
and backflows occur. the most significant in the
• The larger the separated region, the boundary layer, the separated
larger the pressure drag. region, and the wake.

6
Heat Transfer

Local and average

Nusselt numbers:

Average Nusselt number:

Film temperature:

Average friction
coefficient:

Average heat transfer

coefficient:

The heat transfer rate:

7
PARALLEL FLOW OVER FLAT PLATES
The transition from laminar to turbulent flow depends on the surface geometry,
surface roughness, upstream velocity, surface temperature, and the type of fluid,
among other things, and is best characterized by the Reynolds number.
The Reynolds number at a distance x from the leading edge of a flat plate is
expressed as

A generally accepted value for

the Critical Reynold number

The actual value of the engineering

critical Reynolds number for a flat
plate may vary somewhat from 105 to
3  106, depending on the surface
roughness, the turbulence level, and
the variation of pressure along the
surface. 8
Friction Coefficient

Combined laminar + turbulent flow:

9
10
Heat Transfer Coefficient
The local Nusselt number at a location x for laminar flow over a flat
plate may be obtained by solving the differential energy equation to be

These relations are for

isothermal and smooth surfaces
The local friction and heat transfer
coefficients are higher in turbulent
flow than they are in laminar flow.
Also, hx reaches its highest values
when the flow becomes fully
turbulent, and then decreases by a
factor of x−0.2 in the flow direction.
The variation of the local friction
and heat transfer coefficients for
11
flow over a flat plate.
Nusselt numbers for average heat transfer coefficients

Laminar +
turbulent

For liquid metals

For all liquids, all Prandtl numbers

Graphical representation of the average

heat transfer coefficient for a flat plate with
12
combined laminar and turbulent flow.
13
Flat Plate with Unheated Starting Length
Local Nusselt numbers

Average heat transfer coefficients

Flow over a flat plate

with an unheated
starting length. 14
Uniform Heat Flux
For a flat plate subjected to uniform heat flux

These relations give values that are 36 percent higher for

laminar flow and 4 percent higher for turbulent flow relative
to the isothermal plate case.

When heat flux is prescribed, the rate of heat transfer to or

from the plate and the surface temperature at a distance x
are determined from

15
FLOW OVER CYLINDERS AND SPHERES
Flow over cylinders and spheres is frequently encountered in practice.
The tubes in a shell-and-tube heat exchanger involve both internal flow through
the tubes and external flow over the tubes.
Many sports such as soccer, tennis, and golf involve flow over spherical balls.

At very low velocities, the fluid

completely wraps around the
cylinder. Flow in the wake region is
characterized by periodic vortex
formation and low pressures.

Laminar boundary layer

separation with a turbulent
wake; flow over a circular
cylinder at Re=2000. 16
For flow over cylinder or sphere, both the friction drag and the pressure drag can
be significant.
The high pressure in the vicinity of the stagnation point and the low pressure on
the opposite side in the wake produce a net force on the body in the direction of
flow.
The drag force is primarily due to friction drag at low Reynolds numbers (Re<10)
and to pressure drag at high Reynolds numbers (Re>5000).
Both effects are significant at intermediate Reynolds numbers.

Average drag
coefficient for
cross-flow
over a smooth
circular cylinder
and a smooth
sphere. 17
18
Effect of Surface Roughness
Surface roughness, in general, increases the drag coefficient in turbulent flow.
This is especially the case for streamlined bodies.
For blunt bodies such as a circular cylinder or sphere, however, an increase in
the surface roughness may increase or decrease the drag coefficient depending
on Reynolds number.

The effect of surface roughness on the drag coefficient of a sphere. 19

20
Heat Transfer Coefficient

• Flows across cylinders and

spheres, in general, involve flow
separation, which is difficult to
handle analytically.
• Flow across cylinders and
spheres has been studied
experimentally by numerous
investigators, and several
empirical correlations have been
developed for the heat transfer
coefficient.

Variation of the local heat

transfer coefficient along the
circumference of a circular
21
cylinder in cross flow of air.
For flow over a cylinder

The fluid properties are evaluated at the film temperature

For flow over a sphere

The fluid properties are evaluated at the free-stream temperature T,

except for s, which is evaluated at the surface temperature Ts.

Constants C and m are

given in the table.
The relations for cylinders above are for single cylinders or
cylinders oriented such that the flow over them is not affected by
22
the presence of others. They are applicable to smooth surfaces.
23
24
FLOW ACROSS TUBE BANKS
• Cross-flow over tube banks is commonly encountered in
practice in heat transfer equipment, e.g., heat
exchangers.
• In such equipment, one fluid moves through the tubes
while the other moves over the tubes in a perpendicular
direction.
• Flow through the tubes can be analyzed by considering
flow through a single tube, and multiplying the results by
the number of tubes.
• For flow over the tubes the tubes affect the flow pattern
and turbulence level downstream, and thus heat transfer
to or from them are altered.
• Typical arrangement: in-line or staggered
• The outer tube diameter D is the characteristic length.
• The arrangement of the tubes are characterized by the
transverse pitch ST, longitudinal pitch SL , and the
diagonal pitch SD between tube centers.

25
diagonal
pitch

Arrangement of the
tubes in in-line and
staggered tube
banks (A1, AT, and
AD are flow areas at
indicated locations,
and L is the length of
the tubes).

26
 All properties except Prs are to
be evaluated at the arithmetic
mean temperature.
Correlations in Table 7-2
The average Nusselt number relations in Table 7–2 are for tube banks
with more than 16 rows. Those relations can also be used for tube
banks with NL < 16 provided that they are modified as
NL < 16

where F is a correction factor whose values are given in Table 7–3.

For ReD > 1000, the correction factor is independent of Reynolds number.
Log mean
temperature
difference
Exit temperature

Heat transfer
rate
27
28
 Pressure drop

• f is the friction factor and

c is the correction factor.
• The correction factor c
given is used to account
for the effects of deviation
from square arrangement
(in-line) and from
equilateral arrangement
(staggered).

29
 Summary
• Drag and Heat Transfer in External Flow
 Friction and pressure drag
 Heat transfer
• Parallel Flow Over Flat Plates
 Friction coefficient
 Heat transfer coefficient
 Flat plate with unheated starting length
 Uniform Heat Flux
• Flow Across Cylinders and Spheres
 Effect of surface roughness
 Heat transfer coefficient
• Flow across Tube Banks
 Pressure drop

30