Yamaha RX-V 463 AV Receiver PDF
Yamaha RX-V 463 AV Receiver PDF
Yamaha RX-V 463 AV Receiver PDF
it
CAUTIOI for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
RISK OF ELECTRIC SHOCK openings must not be blocked or covered, The openings
L- DO NOT OPEN .....J
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
CAUTION: TO REDUCE THE RISK OF be placed in a built-in installation such as a bookcase or rack
ELECTRIC SHOCK, DO NOT REMOVE unless proper ventilation is provided or the manufacturer's
COVER (OR BACK). NO USER-SERVICEABLE instructions have been adhered to.
PARTS INSIDE. REFER SERVICING TO 11 Power Sources - This product should be operated only from
QUALIFIED SERVICE PERSONNEL. the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
• Explanation of Graphical Symbols products intended to operate from battery power, or other
sources, refer to the operating instructions.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
12 Grounding or Polarization - This product may be equipped
presence of uninsulated "dangerous voltage" within with a polarized alternating current line plug (a plug having
the product's enclosure that may be of sufficient one blade wider than the other). This plug will fit into the
magnitude to constitute a risk of electric shock to power outlet only one way. This is a safety feature. If you
persons. are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
The exclamation point within an equilateral triangle
your electrician to replace your obsolete outlet. Do not
is intended to alert you to the presence of important
defeat the safety purpose of the polarized plug.
operating and maintenance (servicing) instructions in
the literature accompanying the appliance. 13 Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched
1 Read Instructions - All the safety and operating instructions by items placed upon or against them, paying particular
should be read before the product is operated, attention to cords at plugs, convenience receptacles, and the
2 Retain Instructions - The safety and operating instructions point where they exit from the product.
should be retained for future reference. 14 Lightning - For added protection for this product during a
3 Heed Warnings - All warnings on the product and in the lightning storm, or when it is left unattended and unused for
operating instructions should be adhered to. long periods of time, unplug it from the wall outlet and
4 Follow Instructions - All operating and use instructions disconnect the antenna or cable system. This will prevent
should be followed. damage to the product due to lightning and power-line
5 Cleaning - Unplug this product from the wall outlet before surges.
cleaning. Do not use liquid cleaners or aerosol cleaners. 15 Power Lines - An outside antenna system should not be
6 Attachments - Do not use attachments not recommended by located in the vicinity of overhead power lines or other
the product manufacturer as they may cause hazards. electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
7 Water and Moisture - Do not use this product near water -
system, extreme care should be taken to keep from touching
for example, near a bath tub, wash bowl, kitchen sink, or
such power lines or circuits as contact with them might be
laundry tub; in a wet basement; or near a swimming pool;
fatal.
and the like.
16 Overloading - Do not overload wall outlets, extension
8 Accessories - Do not place this product on an unstable cart,
cords, or integral convenience receptacles as this can result
stand, tripod, bracket, or table. The product may fall,
in a risk of fire or electric shock.
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod, 17 Object and Liquid Entry - Never push objects of any kind
bracket, or table recommended by the manufacturer, or sold into this product through openings as they may touch
with the product. Any mounting of the product should dangerous voltage points or short-out parts that could result
follow the manufacturer's instructions, and should use a in a fire or electric shock. Never spill liquid of any kind on
mounting accessory recommended by the manufacturer. the product.
9 A product and cart combination should be moved with care. 18 Servicing - Do not attempt to service this product yourself
Quick stops, excessive force, and uneven surfaces may as opening or removing covers may expose you to
cause the product and cart combination to dangerous voltage or other hazards. Refer all servicing to
overturn. qualified service personnel.
19 Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
Caution-i En
IMPORTANT SAFETY INSTRUCTIONS
d) If the product does not operate normally by following 24 Outdoor Antenna Grounding - If an outside antenna or
the operating instructions. Adjust only those controls cable system is connected to the product, be sure the antenna
that are covered by the operating instructions as an or cable system is grounded so as to provide some
improper adjustment of other controls may result in protection against voltage surges and built-up static charges.
damage and will often require extensive work by a Article 810 of the National Electrical Code, ANSIINFPA 70,
qualified technician to restore the product to its normal provides information with regard to proper grounding of the
operation, mast and supporting structure, grounding of the lead-in wire
e) If the product has been dropped or damaged in any to an antenna discharge unit, size of grounding conductors,
way, and location of antenna discharge unit, connection to grounding
f) When the product exhibits a distinct change in perfor- electrodes, and requirements for the grounding electrode.
mance - this indicates a need for service.
20 Replacement Parts - When replacement parts are required, EXAMPLE OF ANTENNA GROUNDING
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
ANTENNA
hazards. LEAD IN
WIRE
21 Safety Check - Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
22 Wall or Ceiling Mounting - The unit should be mounted ANTENNA
DISCHARGE UNIT
to a wall or ceiling only as recommended by the (NEe SECTION 810-20)
manufacturer.
ELECTRIC
23 Heat - The product should be situated away from heat SERVICE
EQUIPMENT
sources such as radiators, heat registers, stoves, or other GROUNDING CONDUCTORS
(NEC SECTION810-21)
products (including amplifiers) that produce heat.
~;;:;~~- GROUND CLAMPS
attention to Article 820-40 of the NEC that provides NEe - NATIONAl ELECTRICAL CODE
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.
Caution-ii En
Caution: Read this before operating your unit.
1 To assure the finest performance, please read this manual 18 Before moving this unit, press@STANDBY/ON to set this
carefully. Keep it in a safe place for future reference. unit in the standby mode, and disconnect the AC power plug
2 Install this sound system in a well ventilated, cool, dry, clean from the wall outlet.
place - away from direct sunlight, heat sources, vibration, 19 VOLTAGE SELECTOR (Asia and General models only)
dust, moisture, and/or cold. Allow ventilation space of at least The VOLTAGE SELECTOR on the rear panel of this unit
30 cm on the top, 20 cm on the left and right, and 20 cm on must be set for your local main voltage BEFORE plugging
the back of this unit. into the AC wall outlet.
3 Locate this unit away from other electrical appliances, motors, Voltages are 110--120/220-240 V AC, 50/60 Hz.
or transformers to avoid humming sounds. 20 The batteries shall not be exposed to excessive heat such as
4 Do not expose this unit to sudden temperature changes from sunshine, fire or like.
cold to hot, and do not locate this unit in a environment with 21 Excessive sound pressure from earphones and headphones can
high humidity (i.e. a room with a humidifier) to prevent cause hearing loss.
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may fall onto WARNING
this unit and/or this unit may be exposed to liquid dripping or TO REDUCE THE RISK OF FIRE OR ELECTRIC
splashing. On the top of this unit, do not place: SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
- other components, as they may cause damage and/or OR MOISTURE.
discoloration on the surface of this unit.
- burning objects (i.e. candles), as they may cause fire,
This unit is not disconnected from the AC power
damage to this unit, and/or personal injury.
source as long as it is connected to the wall outlet, even
- containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to if this unit itself is turned off by @STANDBY/ON.
this unit. This state is called the standby mode. In this state, this
6 Do not cover this unit with a newspaper, tablecloth, curtain, unit is designed to consume a very small quantity of
etc. in order not to obstruct heat radiation. If the temperature power.
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury. FOR CANADIAN CUSTOMERS
7 Do not plug in this unit to a wall outlet until all connections To prevent electric shock, match wide blade of plug to
are complete.
wide slot and fully insert.
8 Do not operate this unit upside-down. It may overheat,
This Class B digital apparatus complies with Canadian
possibly causing damage.
ICES-003.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cord. POUR LES CONSOMMATEURS CANADIENS
11 Do not clean this unit with chemical solvents; this might Pour eviter les chocs electriques, introduire la lame la
damage the finish. Use a clean, dry cloth. plus large de la fiche dans la borne correspondante de
12 Only voltage specified on this unit must be used. Using this la prise et pousser jusqu'au fond.
unit with a higher voltage than specified is dangerous and may Cet appareil numerique de la classe Best conforme a
cause fire, damage to this unit, and/or personal injury. Yamaha la norme NMB-003 du Canada.
will not be held responsible for any damage resulting from use
of this unit with a voltage other than specified.
IMPORTANT
13 To prevent damage by lightning, keep the power cord and Please record the serial number of this unit in the space
outdoor antennas disconnected from a wall outlet or the unit
below.
during a lightning storm.
MODEL:
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
Serial No.:
cabinet should never be opened for any reasons. The serial number is located on the rear of the unit.
15 When not planning to use this unit for long periods of time Retain this Owner's Manual in a safe place for future
(i.e. vacation), disconnect the AC power plug from the wall reference.
outlet.
16 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
17 Be sure to read the "Troubleshooting" section on common
operating errors before concluding that this unit is faulty.
Caution-iii En
Contents
XM Satellite Radio tning 46
INTRODUCTION Connecting the XM Mini-Tuner Dock 46
Activating XM Satellite Radio 47
Features 2 Basic XM Satellite Radio operations 47
Getting started 3 Selling XM Satellite Radio preset channels 49
Quick start guide 4 Displaying the XM Satellite Radio information 50
Preparation: Check the items 4 SIRIUS Satellite Radio™ tuning 51
Step I: Set up your speakers 5 Connecting the SiriusConnect™ tuner 51
Step 2: Connect your DVD player and other Activating SIRIUS Satellite Radio™ subscription.. 52
components 6 Basic SIRIUS Satellite Radio™ operations 52
Step 3: Press SCENE I button 7 Setting the SIRIUS Satellite Radio™ preset
What do you want to do with this unit? 8 channels 54
Selling the Parental Lock.. 54
Displaying the SIRIUS Satellite Radio™
information 56
PREPARATION Using iPod™ 57
Controlling iPod™ 57
Connections 9 Using Bluetooth™ components 59
Rear panel 9 Pairing the Bluetooth™ adapter and your Bluetooth
Placing speakers 10 component 59
Connecting speakers II Playback of the Bluetooth™ component.. 59
Information on jacks and cable plugs 13 Recording 60
Information on HDMfT M 14
Audio and video signal flow 14
Connecting video components IS ADVANCED OPERATION
Connecting other components 16
Connecting audio components 18
Connecting a Yamaha iPod™ universal dock or SETMENU 61
Bluetooth™ adapter. 19 Using SET MENU 62
Using the VIDEO AUX jacks on the front panel 19 I SOUND MENU 63
Connecting the FM and AM antennas 20 2 INPUT MENU 68
Connecting the power cable 20 3 OPTION MENU 70
Setting the speaker impedance 21 Remote control features 73
Turning on and off the power 21 Controlling this unit, a TV, or other components 73
Front panel display 22 Setting remote control codes 75
Optimizing the speaker setting Advanced setup 76
for your listening room 24
Using AUTO SETUP 24
ADDITIONAL INFORMATION
BASIC OPERATION Troubleshooting 78
Glossary 88
Selecting the SCENE templates 28 Specifications 90
Selecting the desired SCENE template 28 Index 91
Creating your original SCENE templates 31
Using remote control on the SCENE feature 32
Playback 33 APPENDIX
Basic operations 33
Selecting audio input jacks
(AUDIO SELECT) 34 (at the end of this manual)
Selecting the MULTI CH INPUT component... 34
Displaying the current status of this unit on a video Front panel i
monitor 35 Remote control ii
Using your headphones 35 List of remote control codes iii
Muting the audio output... 35
Playing video sources in the background of an audio
source 36
Displaying the input source information 36
Using the sleep timer 37 About this manual
Sound field programs 38 • '...~ indicates a tip for your opemtion.
Sound field program descriptions 38 • Some operations can be performed by using either the buttons on the
Using audio features 41 front panel or the ones on the remote control. In case the button
Enjoying high quality sound 41 names differ between the front panel and the remote control, the
Adjusting the tonal quality 41 button name on the remote control is given in parentheses.
Adjusting the speaker leveL 41 • This manual is printed prior to production. Design and specifications
are subject to change in part as a result of improvements, etc. In case
Selecting the night listening mode 42 of differences between the manual and product, the product has
FMIAM tuning 43 priority.
Automatic tuning 43 • "Q)SPEAKERS" or "@OVO" (example) indicates the name of the
Manual tuning 43 parts on the front panel or the remote control. Refer to the attached
Automatic preset tuning 44 sheet or the pages at the end of this manual for the information about
•
Manual preset tuning 44 each position of the parts.
Selecting preset stations 45 • The symbol ..... " with page number(s) indicates the corresponding
Exchanging preset station 45 reference page(s).
1 En
Features
Built-in 5-channel power amplifier Radio tuners
• Minimum RMS output power • FM/AM tuning capability
[U.S.A. and Canada models] • XM Satellite Radio tuning capability (using XM Mini-Tuner
(I kHz, 0.9% THO, 80) and Home Dock, sold separately)
105 W/ch • SIRIUS Satellite Radio™ tuning capability (using SIRIUS
Connect tuner, sold separately)
[Other models]
(I kHz, 0.9% THO, 60) HDMI (High-Definition Multimedia Interface)
105 W/ch • HDMI interface for standard, enhanced or high-definition
video (includes 1080p video signal transmission) as well as
SCENE select function multi-channel digital audio
• Preset SCENE templates for various situations DOCK terminal
• SCENE template customizing capability • DOCK terminal to connect a Yamaha iPod universal dock
(such as YDS-IO, sold separately) or Bluetooth adapter
Decoders and DSP circuits
(such as YBA-IO, sold separately).
• Proprietary Yamaha technology for the creation of multi-
channel surround sound Other features
• Compressed Music Enhancer mode • YPAO (Yamaha Parametric Room Acoustic Optimizer) for
• Dolby Digital decoder automatic speaker setup
• Dolby Pro Logic/Dolby Pro Logic II decoder • I92-kHz/24-bit 0/A converter
• DIRECT mode for high quality sound for all sources
• DTS decoder • 6 additional input jacks for discrete multi-channel input
• Neural Surround decoder • OSD (on-screen display) menus that allow you to optimize
(U.S.A. and Canada models only) this unit to suit your individual audiovisual system
• Virtual CINEMA DSP • Component video input/output capability
• SILENT CINEMNM (3 COMPONENT VIDEO INs and I MONITOR OUT)
• Optical and coaxial digital audio signal jacks
• Sleep timer
• Cinema and music night listening modes
• iPod controlling capability
• Remote control with preset remote control codes
Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is
SIRlusiI
SAULLIU IADIO
used by Yamaha in accordance with a license agreement.
©2006 SIRIUS Satellite Radio Inc. "SIRIUS", "Sirius Connect",
the SIRIUS dog logo, channel names and logos are trademarks of
SIRIUS Satellite Radio Inc.
2 En
Getting started
• Supplied accessories • Installing batteries in the remote control
Check that you received all of the following parts.
o Remote control
o Batteries (2) (AAA, R03, UM-4)
o Optimizer microphone
o AM loop antenna
o Indoor FM antenna
• VOLTAGE SELECTOR
(Asia and General models only)
Caution
The VOLTAGE SELECTOR on the rear panel of this
unit must be set for your local voltage BEFORE
plugging the power cable into the AC wall outlet.
Improper setting of the VOLTAGE SELECTOR may
1 Take off the battery compartment cover.
cause damage to this unit and create a potential fire
hazard.
2 Insert the two supplied batteries
Rotate the VOLTAGE SELECTOR clockwise or
(AAA, R03, UM-4) according to the polarity
counterclockwise to the correct position using a
markings (+ and -) on the inside of the
straight slot screwdriver.
battery compartment.
Voltages are as follows:
Asia model. 2201230-240 V AC, 50/60 Hz
General model 3 Snap the battery compartment cover back
...................... 110/120/220/230-240 V AC, 50/60 Hz into place.
VOLTAGE
SELECTOR
• Change all of the batteries if you notice that the operation range
Voltage indication
of the remote control decreases.
• Do not use an old battery and a new one together.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not throwaway batteries with general house waste; dispose
of them correctly in accordance with your local regulations.
• If the remote control is without batteries for more than 2
minutes, or if exhausted batteries remain in the remote control,
the contents of the memory may be cleared. When the memory
is cleared, insert new batteries and set up the remote control
code.
come through loud and clear without annoying blaring or Electronics Group recommend you to avoid .. •
distortion - and, most importantly, without affecting your prolonged exposure from excessive volume levels. ~
sensitive hearing.
3 En
Quick start guide
The following steps describe the easiest way to enjoy
DVD movie playback in your home theater. ;;1(8if'
\:."->,,<?ibt•.l0:::' ...,,(/.1:1;0
DYD player
fl
Surround left
speaker
2. Center speaker
Cl Active subwoofer x1
Select an active subwoofer equipped with an RCA
input jack.
Cl Speaker cable x5
Cl Subwoofer cable x1
Select a monaural RCA cable.
Cl DVD player x1
Select DVD player equipped with coaxial digital
audio output jack and composite video output
jack.
Cl Video monitor x1
--
~m?'
".
'<W'W
Select a TV monitor. video monitor or projector
equipped with a composite video input jack.
Cl Video cable x2
Select an RCA composite video cable.
Cl Digital coaxial audio cable x1
--..
'~~~1":"',;.t-:v<i::ll"
-.. ;;;y
4 En
QUick start Ulde
Place your speakers in the room and connect them to this Front and center speakers
unit.
Surround speakers
it,,)
part of this unit.
•
Input jack SUBWOOFER
OUTPUT jack
Subwooler cable
5 En
QUick start guide
step ~:Connect'Du,; D,JjOpl,yer' 3 Connect the video cable to the video input
:. ,:1 /. aIJ4'Dtlle( C(J"'PJI~!"'S~ :l
. . . ,~ ::: G_._~ __;;'__<_.~".:, ;o>:~ ~_, .Y-?~,h __-u..:Wn__,
jack of your video monitor and the VIDEO
MONITOR OUT jack of this unit.
Video monitor AV receiver
Make sure that this unit and the DVD Video input 1 ~iiiiiiiii=::;;=J
player are unplugged from the AC wall jack ...
Video cable VIDEO MONITOR OUT
outlets. jack
6 En
QUick start gUide
1 Turn on the video monitor and then set the If you connect a Yamaha product that has capability of the
SCENE control signals, this unit can automatically activate the
input source selector of the video monitor to component and start playback. Refer to the instruction manual of
this unit. the DVD player for further information.
SCENE DVDViewing
1
~~~~~
- input source: DVD
- sound field program: STRAIGHT
[__---J -- @
SCENE
For when you want to enjoy a DVD playback.
Disc Listening
2 - input source: DVD
- sound field program: 5ch Stereo
For when you want to listen to a music disc from
the connected DVD player as the background
music for this room.
SCENE TV Viewing ••
3 - input source: DTV/CBL
- sound field program: STRAIGHT
For when you want to watch a TV program.
;-'<f-:. SCENE Radio Listening *2, '3, '4
The indicator on the selected SCENE button lights up while 4 - input source: TUNER
this unit is in the SCENE mode. - sound field program: 5ch Enhancer
For when you want to listen to a music program
3 Start playback of the desired DVD on your from the FM radio station.
player.
4 Rotate CD VOLUME to adjust the volume. '1 You must connect a cable TV or a satellite tuner to this unit in
advance. See page 17 for details.
=::::::..
'2 You need to connect the supplied FM and AM antennas to this
- unit in advance. See page 20 for details.
'3 You must tune into the desired radio station in advance. See
pages 43 to 45 for tuning information.
--
@
-~
'4 To achieve the best possible reception, orient the connected
AM loop antenna, or adjust the position of the end of the
=- indoor FM antenna.
9 -
--"''' ...- .:\rj{~
~ 0) @ You can change the assigned SCENE template for the SCENE
buttons. See page 28 for details.
~C?!":
When you change the input source or sound field program, the
•
SCENE mode is deactivated.
7 En
QUIck start gUIde
• Additional features
Automatically turning off this unit "' P.37
8 En
Connections
7 8
.........
99+
66- e.UltllO....oG
9999+
6666-
8 -.. 0 8--0
(U.S.A. model)
<D HDMljacks 14
® DOCK terminal 19
(J) Speaker terminals II
® VOLTAGE SELECTOR 3
(Asia and General models only)
® AUDIO jacks 13
®) VIDEO jacks 13
9En
•
Connections
The speaker layout below shows the speaker setting we recommend. You can use it to enjoy CINEMA DSP and multi-
channel audio sources.
10 En
Connections
';• Connei:ljnii<sp,e~~fi(.9,!;;;'
.:. ";i.,i./ --~';"~~~~-'-. _. -f... :M'~"','ld_~,·;:;.._~<;t§;_':"·'.a, .... O' ", ,W 'J'<';j«;; '~~. '_ ' .
Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. If the connections are faulty,
this unit cannot reproduce the input sources accurately.
Caution
• Before connecting the speakers, make sure that the AC power plug is disconnected from the AC waH outlet.
• Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage
this unit and/or the speakers. If the speaker wires are short-circuited, "CHECK SP WIRES" appears in the front
panel display when you tum on this unit.
• Use the magneticaHy shielded speakers. If this type of speaker still creates interference with the monitor, place the
speakers away from the monitor.
• If you are to use 6 ohm speakers, be sure to set "SP IMP." to "6Q MIN" before using this unit. For details about the
speaker impedance setting, see page 21.
Surround speakers
Right Left
FRONT B terminals
Connect the alternative front speaker system
(FRONT B),
Subwoofer
Right Left
Front speakers
(FRONT A)
11 En
•
Connections
12 En
Connections
Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with.
Audio jacks and cable plugs Video jacks and cable plugs
~~~
(White) (Red) (Orange)
lWJ) ~
(Yellow)
~~~
(Red) (Blue) (Green)
t t t t t t t t
Wf
Left and right
analog audio
Coaxial
digital audio
Optical
digital
, ,
Composite
video cable
LW Component
video cable
cable plugs cable plug audio cable plug plugs
plug
DIGITAL AUDIO OPTICAL jacks Video signal flow for MONITOR OUT
For digital audio signals transmitted via optical digital Output
audio cables. Input (MONITOR OUT)
COMPONENT PR PB Y PR PB Y
"Niil.'
<" ."",.' :iI VIDEO ~~~ .~~~
• You can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. Optical input jacks are compatible with digital VIDEO ~ ~
signals with up to 96 kHz of sampling frequency.
• This unit handles digital and analog signals independently. Thus
audio signals input at the digital jacks are not output at the ,N~~!i
analog AUDIO OUT (REC) jacks.
The OSD signal is not output at the DVR OUT (REC) jacks.
13 En
•
Connections
• HOMI compatibility with this unit • HOMI jack and cable plug
Compatible HOMI
Audio signal Audio signal C )
HOMI
types formats
AUDIO €) -------------t>€)
€) €)
----I_~ Digital output
---~-~ Through
14 En
Connections
TV (or projector)
15 En
•
Connections
·;conri'ttifliJ ~t6i~ciJirrp61t,~t~~:~:;
• ,. _""'" .,,,,,,~,,,,,,,.~,. . .,.y,,>,,;}0,',,,, >.',><, -:.; "" ~~Y""'~~ :i~",
16 En
Connections
Video out
DVD recorder,
PVR or VCR
.........
I
I
indicates recommended
connections
indicates alternative
connections
(One for the video connection,
•
and one for the audio
connection)
17 En
Connections
• Connecting a CD player and a CD Make sure that this unit and other
recorder/MD recorder components are unplugged from the
AC wall outlets.
-----------------i,
,
I
I
,,
I
,,
CD player
• When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 34), this unit automatically
turns off the digital sound field processor, and you cannot select sound field programs.
• This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that
you connect a 5. I-channel speaker system before using this feature.
'T1
ag
nIl'
.~~~ CIl
c
<:r
~
0
0
if ~
n
"
::l
0 0 0
s s s
Multi-format playerl
External decoder
18 En
ConnectIons
Caution
Make sure that this unit and other
components are unplugged from the Be sure to tum down the volume of this unit and other
AC wall outlets. components before making connections.
--VIO.OAUX--
vao L AUDIO A PORTAIILIE
19 En
•
Connections
• The AM loop antenna should be placed away from this unit. Assembling the supplied AM loop antenna
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
• A properly installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality,
install an outdoor antenna. Consult the nearest authorized
Yamaha dealer or service center about outdoor antennas.
Outdoor AM antenna
Usea5to IOm(16to33
ft) vinyl-covered wire
extended outdoors from a AM loop Indoor FM
window. antenna antenna
(supplied) (supplied)
(U.S.A. model)
Power cable
20 En
Connections
..
control.
While holding
down
The setting you made is reflected next time you turn on this unit.
21 En
•
Connections
Note]
The XM and SIRIUS indicator is only applicable to the U.S.A. and Canada models and the cursor on the left of the XM indicator or
SIRIUS indicator lights up only when "XM" or "SIRIUS" is selected as the input source.
~~"'LnCH
-~Haml
IXl DIGITAL
IXlPLI
.....
.....
..... ... .....
.....
..... .....
.....
I·.... .. ...
22 En
ConnectIons
@ Multi-information display
Shows the name of the current sound field program and
Approximately
6 m (20 11) --=-.-=--
30° • 30°
~
I
~ c l~} Input channel indicators
~
Outputs infrared control signals. Aim this window at the
component you want to operate.
23 En
•
Optimizing the speaker setting for your listening room
This unit employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) technology which lets you avoid
troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically. The supplied
optimizer microphone collects and this unit analyzes the sound your speakers produce in your actual listening
environment.
RUTO SETUP
Before starting the automatic setup, check the following
check points. SETUP·······RUTO
.. STRRT
a Speakers are connected appropriately.
RutoMalic
a Headphones are disconnected from this unit. Processing
of all iteM
a This unit and the video monitor are turned on. [a.J/[.,.]: Up/Down
[-<l]/[It-]:Seleet
a This unit is selected as the video input source of
the video monitor.
a The connected subwoofer is turned on and the 3 Place the optimizer microphone at your
volume level is set to about half way (or slightly normal listening position on a flat level
less). surface with the microphone heading
a The crossover frequency controls of the
upward.
connected subwoofer is set to the maximum.
Optimizer microphone
N VOLUMe CROSSOV~
H'GHCUT
-~O'
' , ~- -~Q'"~-
"
MIN MAX
"
MIN
-J
MAX-!,
Controls of a subwoofer (example)
24 En
Optimizing the speaker setting for your Ilstenmg room
4 Make sure that "SETUP" is set to "AUTO~' 6 Press @ENTER to start the setup
and the pointer is pointing at "START". procedure.
,I, This unit starts the auto setup procedure. Loud test
~<i>~
You can also select the following setup methods. In this tones are output from each speaker during the auto
case, press @!::. to select "SETUP", press @<J/I> to setup procedure. Once all items are set, the result
select the one of the following choices and then select display appears in the OSD.
"START".
Choices: AUTO, RELOAD, UNDO, DEFAULT
• Select "AUTO" to automatically run the entire • During the auto setup procedure, do not perform any
"AUTO SETIJP" procedure. operation on this unit.
• Select "RELOAD" to reload the last "AUTO • We recommend getting out of the room while this unit is in
SETUP" settings and override the previous the auto setup procedure. It takes approximately 3 minutes
settings. for this unit to complete the auto setup procedure.
• Select "UNDO" to undo the last "AUTO SETUP"
settings and restore the previous settings.
• Select "DEFAULT' to reset the "AUTO SETUP" This unit performs the following checks:
parameters to the initial factory settings. Speaker wiring/volume level I.J I RI t'l(i/LPJEL
Checks which speakers are connected and the
polarity of each speaker. Also checks and adjusts the
"RELOAD" or "UNDO" is available only when you have volume level of each speaker.
previously run "AUTO SETUP" and confirmed the results.
Speaker distance DISTRtK:E
5 Press @'V to select "START" and then press Checks the distance of each speaker from the
@ENTER to start the setup procedure. listening position and adjusts the timing of each
The following message appears in the OSD. channel.
Press [ENTER]
25 En
•
Optlmlzmg the speaker settmg for your lIstening room
SETUP·······t:lUTO
., STt:lRT 8 Press @<l/ [> repeatedly to toggle between
t:lutoMatic
Processing the setup result displays.
of all iteM
[aJ/[TJ: Up/Down
[ENTERJ:Start Results of the speaker
connection and wiring
t
t:lUTO SETUP
Results of the speaker
distance from the
INITIt:lLIZI~IG
., WIRING/LEIJEL listening position
DISTt:lNCE
SIZE
l,Jt:lITING·· •
[a]:Exit
t:lUTO SETUP
., RESULT
SP: 3/2/13.1
DIST: 3.2/3. 5M
• If "E-9:INTERNAL ERROR" appears during the testing LIJL: -2/+2dB
>SET Ct:lNCEL
procedure, restart from step 4. [a]/[T]: Up/Down
[ENTER]:Detail
• If you selecled "RELOAD" in step 4, no test tones are output.
• If an error occurs during the "AUTO SETUP" procedure, the
setup procedure is canceled and an error screen appears. For
details, see "If an error screen appears" on page 27.
• When this unit detects potential problems during the "AUTO
SETUP" procedure, "WARNING" and the number of warning
messages appears (see page 27).
26 En
Optimizing the speaker setting for your listening room
• If "WARNING" appears
10 Press @'V and then press @<J / t> to select When this unit detects potential problems during the
"SET" or "CANCEL". "AUTO SETUP" procedure, "WARNING" appears in the
Choices: SET, CANCEL result display. Check the warning messages to correct your
• Select "SET' to confirm the "AUTO SETUP" speaker settings.
results.
• Select "CANCEL" to cancel the "AUTO SETUP"
results. Warnings differ from errors in that warnings do not cancel the
"AUTO SETUP" procedure.
11 Press@ENTERtoconfirm your selection.
The top "SET MENU" display appears in the OSD. 1 Make sure the pointer is pointing at
"WARNING" and then press @ENTER to
SET t1ENU display the detailed information about the
TOP MENU warning.
~ ·IlUTO SETUP
•t11lNUIlL SETUP
The number on the right of "WARNING" indicates
•SIGNIlL INFO the number of warning messages.
[Al/[Tl: Up/Down
[ENTERl:Enl..r AUTO SETUP
~ WARNIHG(2)
12 Press@MENUto exit from "SET MENU". RESULT
SP: 3/2/0.1
DIST: 3.2/3. 5M
LVL: -2/+2dB
>SET CANCEL
[Al/[Tl:Up/Down
13 Disconnect the optimizer microphone from [ENTERl:D..lail
this unit.
The optimizer microphone is sensitive to heat. Keep it
away from direct sunlight and do not place it on top
2 Press @<J I t> repeatedly to toggle between
the warning displays.
of this unit.
~\4<~
WARNING
If you change speakers, speaker positions, or the layout of your
W-l:0UT OF PHASE
listening environment, run "AUTO SETUP" again to recalibrate Reverse channel
your system. FL
CENTER
SL
• If an error screen appears [~l/nl: Select
[ENTERl:Relurn
Press @/),/ 'V / <J / t> to select "RETRY" or
~'ci:~
"EXIT" and then press@ENTER.
• For details about each warning message, see the "AUTO
The following display is an example where "E-8:USER SETUP" section in "Troubleshooting" on page 84.
CANCEL" appears in the OSD. • When the corresponding warning message is not
applicable to a speaker, "--" is displayed instead.
ERROR
~ E-8:USER CIlNCEL
Can'l delecl 3 Press @ENTER to return to the result
signal al tHC
display.
>RETRY EXIT
[~l/[~l:Select
[ENTERl:Enl..r
27 En
•
Selecting the SCENE templates
This unit is equipped with 17 preset SCENE templates for
various situations of using this unit. As the initial factory 2 Press @INPUT <J I t> (or press @AMP and
setting, the following SCENE templates are assigned to then press @<J I t» to select the desired
each SCENE button: template.
Remote control
or
or
t
o
Flashes
28 En
Selectmg the SCENE templates
~ Video sources
(DVD video,
I
I
DVD r -1 DVD Viewing
Recorded video)
H DVD Movie Viewing
..,
DVD Live Viewing
DVR DVRVlewing
~
Music discs (CD, SACD
or DVD-Audlo)
I
I
DVD r -1 Disc Hi-fi Listening
-1 Disc Listening
-1 CD
I
I
CD HI·fl Listening
1--1 CD Listening
Y CD Music Listening
I
~ Radio programs TUNER (FMlAM) Radio Listening
I
I
H XM
I
: XM Listening
y SIRIUS
I
I
: SIRIUS Listening
- iPod or Bluetooth
component ~ DOCK
I
I
: Dock Listening
I
TV programs DTV/CBL TV Viewing
I
""""
TV Sports Viewing
* When iPod is connected to the Yamaha iPod universal dock or a Bluetooth component is connected to the Bluetooth adapter, this unit
plays back the audio sources input at the DOCK terminal.
~(j{:.
You can create your original SCENE templates by editing the preset SCENE templates. See page 31 for details.
29 En
•
Selecting the SCENE templates
DVD Live Viewing DVD MUSIC Select this SCENE template when you enjoy the music live
PoplRock video on your DVD player.
DVRViewing DVR MOVIE Select this SCENE template when you play back movies on
Movie Dramatic your digital video recorder.
Disc Hi-fi Listening DVD DIRECT Select this SCENE template when you enjoy the high fidelity
sound of the music discs on your DVD player.
Music Disc DVD STEREO Select this SCENE template when you play back music discs
Listening 2ch Stereo on your DVD player.
Disc Listening DVD , STEREO Select this SCENE template when you play back music
5ch Stereo sources onyout DVD player as the backliround music.
0) .'
CD Hi-fi Listening CD DIRECT Select this SCENE template when you enjoy the high fidelity
sound of the music discs on your CD player.
CD Listening CD STEREO Select this SCENE template when you play back music discs
5ch Stereo on your CD player as the background music.
CD Music Listening CD STEREO Select this SCENE template when you play back music source
2ch Stereo on your CD player.
Radio Listening TUNER MUSIC ENHANCER select this SCENE template when you enjoy FM or AM radio
.. 5ch Enhancer programs.
0) '.
XM Listening XM MUSIC ENHANCER Select this SCENE template when you enjoy XM Satellite
5ch Enhancer Radio programs.
SIRIUS Listening SIRIUS MUSIC ENHANCER Select this SCENE template when you enjoy SIRIUS Satellite
5ch Enhancer Radio programs.
Dock Listening DOCK MUSIC ENHANCER Select this SCENE template when you play back music on
5ch Enhancer your iPod stationed in a Yamaha iPod universal dock or
Bluetooth component that is connected to the Bluetooth
adapter.
TV Viewing DTV/CBL STRAIGHT seleetthis SCENE template when you enjoy general
programs on your TV.
0 I·
TV Sports Viewing DTV/CBL ENTERTAINMENT Select this SCENE template when you enjoy spons programs
TV Sports on your TV.
Game Playing V-AUX ENTERTAINMENT Select this SCENE template when you play video games.
Game
30 En
Selectmg the SCENE templates
,"
:,,~
unit.
RbFil.
~Wi<4
t~alil
Select the name of the SCENE template at step 3
When the SCENE template you want to customize is not
of "Customizing the preset SCENE templates"
assigned to any of the @SCENE buttons, press @AMP
and then press @<l/[> repeatedly to recall the desired and then press @ENTER.
SCENE template on the menu screen. • Press ® b. I V to select the desired character.
• Press ®<:l I [> to place "_" (underscore) under the
space or the desired character.
• Press @RETURN to cancel the new name.
• Press ®ENTER to confirm the new name.
31 En
•
Selecting the SCENE templates
1 Press the desired @SCENE button on the Press and hold the @SCENE button and the
remote control. desired input selector button (@) for 3 seconds.
2 Press the desired buttons in the * area below Press the ®SCENE button again to operate the input source
to control the input source component of the component.
selected SCENE template.
* SCENE buttons
32 En
Playback
33 En
•
Playback
SeIBCl(ilg'h,MQLTI. ClilNPur .
.co",Iioj,,"t::", .
~:;;:·~\'-o,-~:~'t.fA~-~".-~' .~,.
This unit comes with a variety of input jacks. Use this Use this feature to select the component connected to the
feature (audio input jack select) to switch between input MULTI CH INPUT jacks (see page 18) as the input
jacks when more than one input jack is assigned to as the source.
same input source.
Press @INPUT <] I [> repeatedly (or press
• We recommend setting the audio input jack select to "AUTO" @AMP and then @MULTI CH IN) to select
in most cases. MULTICH•
• You can adjust the default audio input jack select of this unit by "MULTI CH" appears in the front panel display.
using "AUDIO SELECT" in "OPTION MENU" (see page 71).
,I,
~ ... ~
t - • '-EL·
H =.- • Ruro,
I
Currently selected audio input jack select setting
34 En
Pia back
You can display the operating information of this unit on a Connect a pair of headphones with a stereo
video monitor. analog audio cable plug to the PHONES jack on
the front panel.
1 Turn on the video monitor connected to this
unit.
2 Press~DISPLAY.
The current status screen appears in the OSD.
[DISPL~Y]:ST~TUS OFF
,I,
~,,~
You can select the amount of time that the current status is ~f<~
displayed in the OSD by using the "OSD-AMP" parameter in When you select a sound field program, SILENT CINEMA mode
"OPTION MENU" (see page 70). is automatically activated (see page 39).
The OSD signal is not output at the DVR VIDEO OUT jacks and • When you connect headphones, no signals are output at the
will not be recorded. speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
35 En
•
Playback
Press the input selector buttons (G) control to CHi=lNt·jEL The number of source channels in the input
signal (front/surroundILFE). For example, a
select a video source and then an audio source. multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is
XU SIRIUS displayed as "3/2/0.1".
c::J c::J
Audio sources BITRi=lTE The number of bits passing a given point per
(QQQ
o . Video sources
FLi=l13
second.
o
V·Al,JX
,I,
~ti>-:.
• You can also select "MULTI CH" as the audio source (see "---" appears when this unit cannot display the corresponding
page 34). Press ®AMP and then press @lMULTI CH IN . information.
• Set the "BGY" parameter in the "MULTI CH SET' menu to the
desired setting to select the default background video input • Video information
source of the MULTI CH INPUT sources (see page 69).
SET t'lENU
TOP ~lEf~U
.. ·~UTO SETUP "---" appears when this unit cannot display the corresponding
·M~NU~L SETUP
.SIGN~L HlFO information.
[Jo.]/[T]:Up/Down HOM I error and message
[ENTER]: Enter
.m
2 Press @\1 repeatedly to select "SIGNAL DEI,) I CE OI.JER The number of the connected HDMI
INFO" and then press@ENTER. components is over the limit.
The audio information about the input source appears HDCP EI':ROR HDCP authentication failed.
in the OSD.
OUT OF RES. The connected monitor is not compatible
with the resolution ofthe input video signal.
36 En
Playback
37 En
•
Sound field programs
This unit is equipped with a variety of precise digital
decoders that allow you to enjoy multi-channel playback
from almost any stereo or multi-channel sound source. • When you select an input source, this unit automatically selects
the last sound field program used with the corresponding input
source.
Press (b)PROGRAM <J/r> (or press@AMPand • Sound field programs cannot be selected when the component
then press @PROG <J I r> repeatedly). connected to the MULTI CH INPUT jacks is selected as the
The name of the selected sound field program appears in input source (see page 34).
the front panel display. • When PCM signals with a sampling frequency higher than 48
kHz are input, this unit is automatically set to the "STRAIGHT"
mode (see page 39).
CINEMA DSP processing. This program presents an image of pop, rock, or jazz live
concert. The sound field reproduces the spaciousness of a massive pavilion with an emphasis
on the vividness of vocals on the stage and solo instruments and the beats of rhythm
instruments.
MUSIC Hall CINEMA DSP processing. This sound field is suitable for classic and orchestral music. The
program uses data collected in a large concert hall in Munich. You can enjoy delicate and
beautiful reverberation and a majestic atmosphere.
Jazz CINEMA DSP processing. The sound field is suitable for jazz and fusion music. It uses data
collected in a famous jazz club in New York. You can enjoy clear reverberation.
CINEMA DSP processing. You can enjoy dynamic and thrilling sound effects as you play
games. The program lets you feel the depth and three-dimensional surrounding sounds of the
field where you are playing, and offers cinema-like surrounding sound effects for the scenes
of movies.
ENTERTAINMENT
Tl) 5pod.s CINEMA DSP processing. You can enjoy sports relays broadcast in stereo and variety shows
with a live sound environment. For sports relays, the voices of commentators and
announcers come clearly from the center; the cheers and atmosphere in the stadium spread
around within a comfortable range, and you can feel like as if you are in the stadium.
t'1o'.)ie 5pacioljs CINEMA DSP processing. The sound field is suitable for movies with an emphasis on
spectacular sound effects, and is a perfect fit with a wide screen. The program reproduces a
wide dynamic range from minimum sound effects to powerful sounds.
MOVIE CINEMA DSP processing. This sound field is also suitable for movies with an emphasis on
three-dimensional sound effects. It restrains reverberation to an moderate extent, but
reproduces sound effects and background music in a soft, three-dimensional manner with
clarity and center orientation of voices as pivots.
2ch 5ter'eo Downmixes multi-channel sources to 2 channel or plays back 2-channel sources as they are.
STEREO
5ch 5ter'eo CINEMA DSP processing. Using this program increases the listening position range. This is
a sound field suitable for background music at parties.
MUSIC 2ch Enhancer' Select these programs to play back compression artifacts (such as the MP3 format) in
5ch Enhancer' 2-channel or 5-channel stereo. This program enhances your listening experience by
ENHANCER regenerating the missing harmonics in a compression artifact.
The sound field programs of this unit are recreations of real-world acoustic environments made from precise measurements taken in the
actual concert hall, music venue, movie theater, etc. Thus, you may notice variations in the strength of the reflections coming from each
direction.
38 En
Sound field programs
• Enjoying 2-channel sources using the • Using sound field programs without
standard decoders surround speakers
Signals input from 2-channel sources can also be played (Virtual CINEMA DSP)
back on multi-channels. Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers by creating
Press @AMP and then press @SUR. DeCODe virtual speakers.
repeatedly to select a decoder. If you set "SUR. L/R SP" to "NONE" (see page 64),
You can select from the following decoders depending on Virtual CINEMA DSP is automatically activated
the type of source you are playing and your personal whenever you select a CINEMA DSP program
preference. (see page 38).
Press@STRAIGHT(orpress@AMPand then
press @STRAIGHT)to select "STRAIGHT".
To deactivate the "STRAIGHT' mode, press
@STRAIGHT(orpress@AMP and then
@STRAIGHT) again so that "STRAIGHT' disappears
from the front panel display.
39 En
•
Sound field programs
,I,
• Editing sound fields parameters ~,,~
You can enjoy good quality sound with the factory default Initial settings are indicated in bold under each parameter.
parameters. Although you do not have to change the initial For Pop/Rock, Hall, Jazz, Game, TV Sports,
settings, you can change some of the parameters to better Movie Spacious and Movie Dramatic:
suit the input source or your listening room.
DSP level DSP LEI.JEL
1 While listening to a source, press @AMP Function: Adjusts the effect level.
and then press @PARAMETER. Choices: MIN, MID, MAX
Panorama Pf:lt·jORf:lNf:I
··or~~
,."t~,,~"'lill Function: Sends stereo signals to the surround
You cannot change parameter values when "MEMORY GUARD" speakers as well as the front speakers for
in "OPTION MENU" is set to "ON" (see page 70). a wraparound effect.
Choices: OFF,ON
Dimension DI NEt·15 I ot~
Function: Gradually adjusts the sound field either
towards the front or towards the rear.
Control range: -3 (towards the rear) to +3 (towards the
front), initial setting is SID (standard).
Center width CT I.JIDTH
Function: Adjusts the center image from all three
front speakers to varying degrees. A
larger value adjusts the center image
towards the front left and right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center channel
sound is output only from front left and
right speakers), initial setting is 3.
40 En
Using audio features
Use the DIRECT mode to enjoy the high quality sounds of You can adjust the output level of each speaker while
the selected source. When the DIRECT mode is activated, listening to a music source. This is also possible when
this unit plays back the selected source with the least playing sources input at the MULTI CH INPUT jacks.
circuitry.
Press @DIRECT (or press ®AMP and then This operation will override the level adjustments made in
@DIRECT)to select "DIRECT". "AUTO SETUP" (see page 24) and "SP LEVEL" (see page 65).
select the high-frequency response • The available speaker channels differ depending on the
(TREBLE) or the low-frequency response setting of the speakers.
• When the video monitor is turned on, the "SPEAKER
(BASS).
LEVEL" adjustment menu appears in the video monitor.
2 Press (6)PROGRAM -<J / c> repeatedly to 2 Press @-<J / C> to adjust the speaker output
adjust the high-frequency response level.
(TREBLE) or the low-frequency response
• Press @c> to increase the value.
(BASS). • Press @-<J to decrease the value.
• Control range: -10 dB to + 10 dB
• If you increase or decrease the high-frequency or the 3 Press (1)LEVEL to turn off the speaker level
low-frequency sound to an extreme level, the tonal quality of
adjustment display.
the surround speakers may not match.
• TONE CONTROL is not effective when this unit is in the
DIRECT mode, or when MULTI CH is selected as the input
source.
41 En
•
USing audio features
Siilet1iingthe~nijht:11stjl1ifiiimo~.
, :'-:,".:;-.",..<>. ,,,,:,,,::('-,-,,,;'. ':·:::.,~_L·>.~ ~_ ,,,~,~ dj.}~""..;;<.,. ""~ _ ·_'l_...4~
• You cannot use the night listening modes in the following cases:
- when the DIRECT mode (see page 41) is selected.
- when the component connected to the MULTI CH INPUT
jacks is selected as the input source (see page 34).
- when headphones are connected to the PHONES jack.
• The night listening modes may vary in effectiveness depending
on the input source and surround sound settings you use.
42 En
FM/AM tuning
There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and
there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use
the automatic and manual preset tuning features to store up to 40 stations.
Automatic tuning is effective when station signals are If the signal received from the station you want to select is
strong and there is no interference. weak, tune into it manually.
2 Press@BAND to select the reception band 1 Press @INPUT <J I [> repeatedly so that
(FM or AM). "TUNER" is displayed in the front panel
display.
3 Press @TUNING AUTO/MAN'L so that the
AUTO indicator lights up in the front panel 2 Press @BAND to select the reception band
display. (FM or AM).
Lights up
3 Press@TUNING AUTO/MAN'L so that the
I AUTO indicator disappears from the front
.... • no
1""
' I .... panel display.
!=I.,- F t'l ::: ::: • '3 t'l H z
No colon <:>
If a colon (:) appears in the front panel display,
T
automatic tuning is not possible. Press No colon <:>
@PRESETITUNING to tum the colon (:) off. If a colon (:) appears in the front panel display,
manual tuning is not possible. Press
4 Press @PRESETITUNING/CH <J I [> once @PRESETITUNING to tum the colon (:) off.
to begin automatic tuning.
When this unit is tuned into a station, the TUNED 4 Press @PRESETITUNING/CH <J I [> to
indicator lights up and the frequency of the received tune into the desired station manually.
station is shown in the front panel display.
,::\rit-:.
Lights up
Hold down the button to continue searching.
I
43 En
•
FM/AM tuning
You can use the automatic preset tuning feature to store You can also store up to 40 stations (A I to E8: 8 preset
FM stations with strong signals up to 40 (AI to E8: 8 station numbers in each of the 5 preset station groups)
preset station numbers in each of the 5 preset station manually.
groups) of those stations in order. You can then recall any
preset station easily by selecting the preset station number. 1 Tune into a station automatically or manually.
See page 43 for tuning instructions.
1 Press @INPUT <J I c> repeatedly so that
"TUNER" is displayed in the front panel 2 Press ®MEMORY.
display. The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
2 Press @BAND to select "FM" as the
reception band. 3 Press @AlB/C/D/E and
@PRESETITUNING/CH <J I c> repeatedly
3 Press and hold ®MEMORY for more than 3 to select a preset station group (A1 to EO)
seconds. while the MEMORY indicator is flashing.
The preset station number as well as the MEMORY Check that the colon (:) appears in the front panel
and AUTO indicators flashes. After approximately 5 display.
seconds, automatic presetting starts from the current
frequency and proceeds toward the higher Flashes
frequencies.
...-
I
' .
Flashes .' I • ~
44 En
FM/AM tuning
You can tune into any desired station simply by selecting You can exchange the assignments of two preset stations
the preset station group and number under which it was with each other. The example below describes the
stored. procedure to exchange preset station "El" with "A5".
When performing this operation with the remote control, press 1 Select preset station "E1" using @AlB/C/D/E
@TUNER to select "TUNER" as the input source. and @PRESETITUNING/CH <J / t>.
See "Selecting preset stations" on this page.
1 Press @AlB/C/D/E (or @A-E/CAT. <J / t»
repeatedly to select the desired preset 2 Press and hold @PRESETITUNING for
station group (A to E). more than 3 seconds.
The preset station group letter appears in the front "E I" and the MEMORY indicator flash in the front
panel display and changes each time you press the panel display.
button.
T
Flashes
45 En
•
XM Satellite Radio tuning
XM Radio offers an extraordinary variety of commercial-free music, plus the best in premier sports, news, talk radio,
stand-up comedy, children's and entertainment programming. XM is broadcast in superior digital audio quality from
coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan.
The XM Satellite Radio service is only available in the 48 contiguous United States (not available in Alaska and Hawaii) and Canada.
46 En
XM Satellite Radio tunmg
DDDDDDDD Lights up
IWICH OVA V·AUX IlTV/Cal ovD IIQCD-Il CD T1JIIIl .' r~!' ....
The XM Radio 10 does not use the letters "I", "0", "S" or "F".
Activate your XM Satellite Radio service in the U.S. online at
http://www.xmradio.comJorcall 1-8oo-XM-RADIO
.::'<f':.
(1-800-967-2346). You will need a major credit card. XM will
When you select "XM" as the input source, this unit
send a signal from the satellites to activate the full channel lineup.
automatically recalls the previously selected channel.
Activation normally takes 10 to 15 minutes, but during peak busy
periods you may need to keep your XM Ready home audio
system on for up to an hour. When you can access the full channel
lineup on your XM Ready home audio system you are done. For • The XM Satellite Radio signals cannot be output at the
more information or to subscribe in Canada, visit XM on the Web AUDIO OUT (REC) jacks.
at www.xmradio.caorcaIlXM·sListener Care at • If a status message or an error message appears in the front
1-877-GET-XMSR (1-877-438-9677). panel display or in the OSO, see the "XM Satellite Radio"
section in "Troubleshooting" on page 78 for appropriate
remedies.
47 En
•
XM Satellite RadIo tuning
,I,
~<i'~
Before performing operations, press @XM to select "XM" as the 3 Press @PRESETITUNING/CH <J I C> (or
input source.
@PRESET/CH /j I 'V) repeatedly to change
• All Channel Search mode the preset channel number (1 to 8).
:-ff'-=.
1 Press @SEARCH MODE (or @SRCH You can also select the preset channel number directly by
MODE) repeatedly to select"ALL CH pressing the numeric buttons (I to 8) on the remote control.
SEARCH". • Direct Number Access mode
2 Press @PRESETITUNING/CH <J I c> (or 1 Press @SRCH MODE repeatedly to select
@PRESET/CH /j I 'V) repeatedly to search "ALL CH SEARCH" or "CAT SEARCH".
for a channel within all channels.
,:'et<-:. 2 Press the numeric buttons (@) to enter the
• You can search for a channel quickly by pressing and holding desired three-digit channel number.
@PRESETITUNINGICH <J II> (or@PRESET/CH fj, I '\/).
For example, to enter the number 123, press the
• To display the XM Radio ID number displayed in the front
numeric buttons as shown below.
panel display, select channel "0".
48 En
XM Satellite Radio tUning
"-'.:=:-II:fI''-14
___--"'I--·C'· 7
::. .':'1 l'tlll
,:':, I _
Colon (:)
Once you set a new preset channel, the one previously stored in
the same preset channel group and number is cleared.
49 En
•
XM Sate/ltte Radio tuning
SO En
SIRIUS Satellite Radio™ tuning
SIRIUS Satellite Radio provides over 130 channels of exclusive entertainment and I00% commercial-free music. Only
SIRIUS has more than 65 original music channels, from today's hits to R&B, oldies and classical masterpieces. From
authentic country and real bluegrass to cool jazz, hot latin, reggae, rock and many more. Best of all, it's all 100%
commercial-free.
SIRIUS also has more than 55 channels of world-class sports, news and entertainment. Included as part of your
subscription, you get up to 16 NFL games a week, up to 40 NBA games a week and up to 40 NHL games a week. (Games
are broadcast during their respective seasons.)
Coupled with great sports news from ESPN, the SIRIUS sports offering is unrivaled. And don't forget a host of other
great news and entertainment, like NPR, CNBC, Fox News, Radio Disney and E! Entertainment Radio. For more
information, visit http://www.sirius.com!.
,',
~"'~
• To ensure optimal reception of the SIRIUS SatelIite Radio
signals, the antenna of the SiriusConnect tuner must be placed
at or near a window with no obstacles in the path to the sky. The
orientation of the antenna for the best reception differs
Connect the SiriusConnect tuner (sold separately) to the depending on the area. Refer to the instruction manuals
SIRIUS jack on the rear panel of this unit. For details, see supplied with the SiriusConnect tuner for the installation of the
the operating instructions provided with the SiriusConnect antenna. You can mount it indoors or outdoors.
tuner. • Use the "ANTENNA INFO" information in the front panel or
SlriusConnect tuner and the antenna "SIRIUS Information" screen in the video monitor (see
(sold separately) page 56) to check the antenna reception level and adjust the
orientation of the antenna.
• You will need to connect the SiriusConnect tunet to the AC waII
outlet.
:M)!~
• If "CHECK SR TUNER" or "ANTENNA ERROR" appears in
the front panel display, the connection of the SiriusConnect
tuner or antenna is incorrect. In such cases, check the
connection of the SiriusConnect tuner and the antenna (see
page 83).
• If "NOT SUPPORTED" appears in the front panel display, this
unit does not support the connected SiriusConnect tuner.
51 En
•
SIRIUS Satellite RadIo rM tuning
iiasicSIRilJs:S~tBlljte RadloT1!,'
~"¥P!!!~l!q,!~: .~:_
Before using the SIRIUS Satellite feature, you need to
activate your SIRIUS Satellite Radio subscription. To 1 Press @INPUT <J I t> (or press @SIRIUS)
activate the subscription, you need the Sirius ID, which is to select "SIRIUS" as the input source.
uniquely assigned to the SiriusConnect tuner. Sirius ID is The cursor on the left of the SIRIUS indicator lights
12-digit number and it appears on the package of the up in the front panel display and the SIRIUS Satellite
SiriusConnect tuner, on the label of the SiriusConnect Radio information (such as channel number, channel
tuner and when you tune into the SIRIUS Satellite Radio name, category, artist name, or song title) for the
Channel "0" (see below). currently selected channel appears in the front panel
display.
• Displaying the Sirius 10 of your Lights up
SiriusConnect tuner I
IIUUICI!
1 Press @SIRIUS.
1:::4 S If;;~ I US I.dea
;:'4:-:.
2 Press @O and then ~ENT to display the
When you select "SIRIUS" as the input source, this unit
Sirius 10 of your SiriusConnect tuner. automatically recalls the previously selected channel.
"000 Sirius IDxxxxxxxxxxxx" ("xxxxxxxxxxxx"
indicates the 12-digit Sirius ID of your SiriusConnect
tuner) appears in the front panel display.
• The SIRIUS Satellite Radio signals cannot be output at the
AUDIO OUT (REe) jacks.
To scroll the message again, press ®INFO (or@INFO). • When you have not activated your subscription yet, you
can only select "184" or "000".
Write the Sirius ID below.
2 Search for a channel by using one of the
ID: _
SIRIUS Satellite Radio search modes.
• To select a channel from the all channel list, see
SIRIUS Satellite Radio online information "All Channel Search mode" on page 53.
Contact for activation • To select a channel by category, see "Category
URL: https//activate.siriusradio.com/ Search mode" on page 53.
Phone: 1-888-539-SIRIUS (1-888-539-7474) • To select a channel from the preset channels, see
"Preset Search mode" on page 53.
• To select the desired channel directly by entering
the channel number, see "Direct Number Access
mode" on page 53.
,I,
~<il~
52 En
SIRIUS Satellite RadIo rM tumng
1 Press @SEARCH MODE (or @SRCH 1 Press @SEARCH MODE (or @SRCH
MODE) repeatedly to select "ALL CH MODE) repeatedly to select "PRESET
SEARCH". SEARCH".
2 Press @PRESETITUNING/CH <J / C> (or 2 Press @CATEGORY (or @A-E/CAT. <J / C»
@PRESET/CH /:::,./ '1/) repeatedly to search repeatedly to change the preset channel
for a channel within all channels. group (A to E).
~'ci<':.
• You can search for a channel quickly by pressing and holding 3 Press @PRESETITUNING/CH <J / C> (or
@PRESETITUNINGlCH <J II> @PRESET/CH /:::,./ '1/) repeatedly to change
(or @PRESET/CH !J.I V). the preset channel number (1 to 8).
• You can skip channels to the previous or next category by
pressing @CATEGORY (or @A-ElCAT. <J 11».
You can also select the preset channel number directly by
• Category Search mode pressing the numeric buttons (I to 8) (@).
53 En
•
SIRIUS Satellite Radio rM tuning
~__~R~1~023 Hair Na
2 Press ®MEMORY (or ®MEMORy). Colon <:)
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
Once you set a new preset channel, the one previously stored in
.... : .,'
the same preset channel group and number is cleared.
..... MEMORy ....·
'. ".
Flashes
You can use the Parental Lock feature to limit the access
to the desired SIRIUS Satellite channels. This unit
You must proceed to and carry out steps 3 through 5 while automatically skips the locked channels when this unit is
the MEMORY indicator is flashing in the front panel in the All Channel Search mode or Category Search mode
display. and you search a channel by pressing
@PRESETITUNINGICH <J / I>
3 Press @CATEGORY (or @A-E/CAT. <J II» (or @PRESET/CH I::. / 'I).
repeatedly to select a preset channel group • Setting the code number and the locked
(A to E) while the MEMORY indicator is channels
flashing. Use this feature to set the Parental Lock code number
The preset channel group letter appears in the front (PIN) and select the channels to be locked.
panel display.
Flashes 1 Press@AMPontheremotecontrol and then
I press@MENU to display.
_ _ ~I-
_ _-==~~:=:..:1::'..=1.; :-'":=:. : .- !. . .!H. :",a!. . :!i=-!.t"_·--!t-!. .·4__ 2 Press@'I to select "MANUAL SETUP" and
then press@ENTER.
Currently selected preset channel group
54 En
SIRIUS Satellite Rad,o'M tuning
55 En
•
SIRIUS Satellite Radio 'M tuning
Before performing the following operations, press • The front panel display can indicate up to 14 alphanumeric
@SIRIUS. characters at once. You can set whether to display the SIRIUS
Satellite Radio information in the front panel display in a
continuous manner or by 14 alphanumeric characters at once by
using the "FL SCROLL" parameter in "OPTION MENU" (see
page 70).
• If the SIRIUS Satellite Radio information contains a character
that cannot be recognized by this unit, the character will be
You can display the SIRIUS Satellite Radio information
displayed with a space.
(such as channel number, channel name, category, artist
• To hold the current SIRIUS Satellite Radio information, press
name, composer name, or song title) for the currently ®ENTER while it is being displayed.
selected channel in the front panel display or in the OSD.
• Displaying the SIRIUS Satellite Radio
NotlJ
" ';].X information in the OSD
If a status message or an error message appears in the front panel
display or in the OSD, see the "SIRIUS Satellite Radio" section Press @INFO (or ~DISPLAY).
in 'Troubleshooting" on page 83 for appropriate remedies. The following screen is displayed in the OSD.
• Displaying the SIRIUS Satellite Radio
information in the front panel display SIRIUS I nfor'r'laUon IRtH:III·f}-1\ [5]
56 En
Using iPod™
Once you have stationed your iPod in a Yamaha iPod universal dock (such as YDS-l 0, sold separately) connected to the
DOCK terminal of this unit (see page 19), you can enjoy playback of your iPod using the supplied remote control. You
can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression artifacts
(such as the MP3 format) stored on your iPod (see page 19).
• Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.
• Some features may not be compatible depending on the model or the software version of your iPod.
,I,
:"'~
• For a complete list of status messages that appear in the front panel display and in the OSD, see the "iPod" section in
"Troubleshooting" on page 85.
• Once your iPod is stationed in a Yamaha iPod universal dock, this unit begins signal transmission with your iPod.
• Once the connection between your iPod and this unit is complete, "iPod connected" appears in the front panel display and the DOCK
indicator lights up in the front panel display.
• Only the analog audio and video signals of your iPod are input at the DOCK terminal, and the analog audio signals can be output at the
analog AUDIO OUT (REC) jacks for recording.
• Your iPod battery is automatically charged when your iPod is stationed in a Yamaha iPod universal dock connected to the DOCK
terminal of this unit as long as this unit is turned on.
You can control your iPod when "V-AUX" is selected as the input source. The operations of your iPod can be done with
the aid of the OSD of this unit (menu browse mode) or without it (simple remote mode).
~ DISPLAY Display
57 En
•
UsmglPod™
iPod
artists
AlbUMS
Songs
Top
>
)
)
[41
I
9
t'1ade-+..o-or·det~
F.:oad +"0 Inch.:t
1 [8)
[91
I
Genres
COMPoser's
Settings
>
>
)
[51
--rt--
[61-\.-~):51
I I ••••••••••••••••••
-7:44--
J -[101
S8En
Using Bluetooth™ components
You can connect a Yamaha Bluetooth adapter (such as YBA-IO, sold separately) to the DOCK terminal of this unit and
enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between
this unit and the Bluetooth component. You need to perform "pairing" the connected Bluetooth adapter and your
Bluetooth component in advance.
Use this feature to perform pairing with the video monitor. The Yamaha Bluetooth adapter can be paired with up to eight
Select "START PAIRING" in "INPUT MENU". See Bluetooth components. When pairing is conducted successfully
with a ninth component and the pairing data is registered, the
page 71 for details.
pairing data for the least recently used other component is
• Quick pairing cleared.
.:*~
•
To cancel the pairing, press@BAND (or (l)BAND) again.
59 En
Recording
Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
NoteiJ
• When this unit is set to the standby mode, you cannot record between other components connected to this unit.
• TONE CONTROL (see page 41) and VOLUME settings, speaker levels (see page 41) and the sound field programs (see page 38) do
not affect recorded material.
• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.
• The XM Satellite Radio signals cannot be output at the AUDIO OUT (REC) jacks.
• The SIRIUS Satellite Radio signals cannot be output at the AUDIO OUT (REC) jacks.
• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if
your source component is connected to provide only digital signals, you cannot record the source.
• A given input source is not output on the same OUT (REC) channel.
• The analog audio signals input at the DOCK terminal can be output at the analog AUDIO OUT (REC) jacks for recording.
• Once you have connected a recording component to this unit, keep the component turned on while using this unit. If the component is
turned off, this unit may distort the sound from other components.
• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright
laws.
:\r.<~
Do a test recording before you start an actual recording.
If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture
itself may be disturbed due to those signals.
1 Turn on all the connected components. 3 Start playback on the selected source
component or select a broadcast station.
2 Press @INPUT <] I [> repeatedly (or press
one of the input selector buttons (@» to 4 Start recording on the recording component.
select the source component you want to
record from.
60 En
SET MENU
You can use the following parameters in "SET MENU" to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
Selects the size of each speaker, the speakers for low-frequency signal output, and the
R)SPERKER SET crossover frequency, and the location of the front speakers connected to the FRONT B 63
terminals.
E) LFE LEI.JEL Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. 66
(3)RUDIO SET Adjusts the muting level, audio delay, maximum volume level and initial volume level. 66
Selects whether to play back HDMI audio signals on this unit or on another HDMI
H)HDt11 SET 67
component connected to the HOMI OUT jack.
R)IHPUT RSSII3HMEHT Assigns the input jacks of this unit according to the component to be used. 68
Selects the decoder mode for the sources connected to the DIGITAL INPUT jacks on the
[.~) DECODER t'10DE rear panel of this unit.
69
Selects the video source played in the background ofthe sources input from the MULTI CH
E>t1ULTI CH SET INPUT jacks.
69
61 En
•
SET MENU
Adjusts the brightness of the front panel display and the way in which the XMand iPod
H) DI SPLH'.... SET 70
infonnation is displayed.
B) t1Et10R'/ I3UHf':D Locks sound field program parameters and other "SET MENU" settings. 70
Designates the default audio input jack select setting for the input sources connected to the
C)HUDIO SELECT DIGITAL INPUT jacks when you turn on the power of this unit.
71
Pair the connected Yamaha Bluetooth adapter (such as YBA-IO, sold separately) with a
E)BLUETOOTH SET 71
Bluetooth component (see page 59).
F) ::·::t1 RHD 10 SET Displays the current reception level of the XM Satellite Radio signals. 72
Sets the SIRIUS Parental Lock code number and the channel lock configuration (see
(3)SIRIUS SET 72
page 54).
.NP!'J
The "XM RADIO SET' and "SIRIUS SET" parameters are only applicable to the U.S.A. and Canada models.
SET t'1ENU
4 Press ® 1:11 V1 <J 1t> and ® ENTER to select
and change the parameter.
TOP t'lEtJU
• Press ® 1:1 / V to select the desired menu or
.. ·~UTO SETUP
• t'l~NU~L SETUP parameter.
·SIGN~L H1FO
• Press ®<J / t> to change the parameter value.
• Press ® ENTER to enter the selected menu or to
confirm the parameter.
• Press@RETURN to return to the previous menu
2 Press ®1:11 Vto select "MANUAL SETUP". level.
[.6.]'[T]:Up/Down
[ENTER] : Et1let'
62 En
SET MENU
~~~
[a)/[T):Up/Down [a)/[T):Up/Down
[ENTERJ:Enter [ENTER):Enter
63 En
•
SET MENU
~;t~
Select "LRG" (large).
When the surround speakers are small
Select "SML" (small). FREQ···80Hz
When you do not use the surround speakers
Subwoofer phase SUBl.dOOFER PHRSE
Select "NONE" (none). This unit is set to the Virtual
Use this feature to switch the phase of your subwoofer if
CINEMA DSP mode (see page 39).
bass sounds are lacking or unclear.
LFE Bass out LFE/BRSS OUT Choices: NORMAL, REVERSE
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals. 1 SOUND t1ENU
Choices: SWFR, FRNT, BOTH fl)SPEflKER SET
1 SOUND MENU s~
fl)SPEflKER SET
LFE/8flSS OUT )fIORMflL REVERSE
~
SWFR FRNT>80TH
• Select "NORMAL" if you do not want to reverse the
phase of your subwoofer.
• Select "REVERSE" to reverse the phase of your
subwoofer.
When a subwoofer is connected to this unit
and you want to get natural bass sound
Select "SWFR" (subwoofer). The LFE signals as well
as the low-frequency signals of other speakers set to
"SML" (or "SMALL") are directed to the subwoofer.
When a subwoofer is connected to this unit
and you want to get rich bass sound
Select "BOTH" (both). The low-frequency signals of
any source are output from the subwoofer. The LFE
signals as well as the low-frequency signals of other
speakers set to "SML" (or "SMALL") are directed to
the subwoofer. The low-frequency signals of the front
left and right channels are directed to the front left and
right speakers and the subwoofer regardless of the
"FRONT SP" setting (see page 63).
When you do not use a subwoofer
Select "FRNT' (front). The LFE signals, the low-
frequency signals of the front left and right channels,
and the low-frequency signals of other speakers set to
"SML" (or "SMALL") are all directed to the front left
and right speakers regardless of the "FRONT SP"
setting (see page 63).
64 En
SET MENU
SlJFR Subwoofer
Niif.'
..••. ••.'M.;.@
65 En
•
SET MENU
1 SOUND t1ENU
D) CENTER GEQ
TEST >OFF ON
.. 100Hz •• ~~ •• 0dS Speaker SPEHKER
300Hz •• ~~ •• 0dS
1kHz .. ~~ .. 0dS
3kHz .. ~~ .. 0dS Adjusts the speaker compression.
10kHz .. ~~ •• 0dS
[.ol)/[T):Up/Down
[-<l)/[lt-l:l=ldjusl Headphone HEHDPHONE
Adjusts the headphone compression.
Test tone TEST
Choices: MIN, SID, MAX
Use this feature to make adjustments for "CENTER GEQ"
• Select "MIN" (minimum) if you regularly listen at low
while listening to a test tone.
volume levels.
Choices: OFF, ON • Select "SID" (standard) for general use.
• Select "OFF' to stop test tones and output the currently • Select "MAX" (maximum) to preserve the greatest
selected source component. amount of dynamic range.
• Select "ON" to output test tones from the center and
front left speakers. • Audio settings (3)HUDIO SET
Use this feature to adjust the overall audio settings of this
• Low-frequency effect level E) LFE LEI.)EL unit.
Use this feature to adjust the output level of the LFE (low-
frequency effect) channel according to the capacity of
your subwoofer or headphones. The LFE channel carries I SOUtlD tlENU
low-frequency special effects which are only added to G)I=lUDIO SET
certain scenes. This setting is effective when the input .. MUTE TYPE···FULL
I=l.DELI=lY······0~s
signal contains the LFE channel. MI=lX VOL.···+16dS
INIT. VOL ••••• OFF
Control range: -20 to 0 dB [.oll/[Tl: Up/DOl,n
Control step: I dB [-<ll/[lt-l:Selecl
66 En
SET MENU
[~J/["'J:Select
[ENTERJ: Rell-lrn
The "MAX YOL." setting takes priority over the "Initial Yolume"
setting. For example, if "INIT.YOL." is set to -20 dB and "MAX
Support audio S. !=IUD I 0
YOL." is set to -30 dB, the volume level is automatically set to
-30 dB when you turn on the power of this unit next time. Use this feature to select whether to play back HDMI
audio signals on this unit or on another HDMI component
Initial volume I t·j IT. I.JOL. connected to the HDMI OUT jack on the rear panel of this
Use this feature to set the volume level when the power of unit.
this unit is turned on.
Choices: Off, MUTE, -80 dB to + 16 dB
Control step: I dB R::<-1')463 Plays back HOMI audio signals on this unit. The
HOMI audio signals input at the HOMI input
jacks of this unit are not output to the HOMI
component connected to the HOMI OUT jack on
The "MAX YOL." setting takes priority over the "INIT.YOL." the rear panel of this unit.
setting.
Other' Plays back HOMI audio signals on another
HOMI component connected to the HOMI OUT
jack.
• This unit transmits audio and video signals input at the HOMI
input jacks to the HDMI out jack only when this unit is turned
on even if "SUPPORT AUDIO" is set to "Other".
• Available audio/video signals depend on the specification of the
connected video monitor. Refer to the instruction manual of
each connected component.
67 En
•
SET MENU
• Input assignment
R)INPUT RSSIGNMENT • Input rename B) I t·jpUT F.:Et-~Rt1E
Use this feature to assign the input jacks according to the Use this feature to change the name of the input source
component to be used if the initial settings of this unit do that appears in the OSD and in the front panel display.
not correspond to your needs. Change the following
parameters to reassign the respective jacks and effectively
2 HIPUT t'lENU
connect more components.
Once the input jacks are reassigned, you can select the B)J NPUT RENRME
R)INPUT RSSIGNMENT
CORXIRL m
.. (1)..... DUD
( DUD
IU.TICHIN
or
o
2 mpUT MENU
3 Press @I::.I Vto select the character you
want to use and then press @<J 1t> to move
R)INPUT RSSIGNMENT
OPTICRL IN to the next space.
.. (2)·····DTU/CBL
(DTu/CBL )
(3) . . . . • CD
( CD
68 En
SET MENU
You can only adjust the value for DOCK when your iPod is
stationed in the Yamaha Universal Dock connected to this unit.
2 INPUT t'lENU
D)DECODER MODE
.. >AUTO LAST
CD ····AUTO
DUD .•. ·AUTO
DTU/CBL ····AUTO
[A) /(~): Up/Down
["')/["'):Selecl
69 En
•
SET MENU
70 En
SET MENU
3 OPTION t'lHIU
C)>lUDIO SELECT [ENTER1:Enter
>>lUTO L>lST
Use this feature to start pairing the connected Yamaha
Bluetooth adapter (such as YBA-IO, sold separately) with
your Bluetooth component. For details about the pairing,
refer to "Pairing the Bluetooth™ adapter and your
• Select "AUTO" if you want this unit to automatically Bluetooth component" on page 59.
detect the type of input signals and select the
appropriate input mode. To ensure security, a time limit of 8 minutes is set for
• Select "LAST" if you want this unit to automatically the pairing operation. You are recommended to read
select the last input mode used for the connected input and fully understand all the instructions before starting.
source (see page 34).
• You cannot automatically revert to the previous parameter To cancel the pairing, press @RETURN to exit from
settings once you initialize the sound field program parameters. "START PAIRING".
• You cannot separately initialize individual sound field
programs. 4 Press @RETURN to exit from "START
• You cannot initialize any sound field program groups when PAIRING".
"MEMORY GUARD" is set to "ON".
71 En
•
SET MENU
3 OPTI ON rlENU
[ENTER] : Rell.,rn
)flofiA
"NONE" is displayed if XM Mini-Tuner Dock is not connected to
this unit. In this case, check the antenna connections (see
page 46).
3 OPTI ON t'lErlU
G)SIRIUS SET
.. PRRENTRL LOCK
[ ...]/[T]: Up/Down
[EtHER]: Select
72 En
Remote control features
In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha
and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code
for each input source (see page 75).
*1 *1
DTV/CBL
AMP
*2
*2
•
selector button.
73 En
Remote control features
-- [3
components assigned to each input selector button. Be !8-==0 .
advised that some buttons may not correctly operate the 1600r~
ooole [4
selected component.
oooreJ [5
QOO~
• The remote control has 13 modes (input areas) to control
components so that the remote control can operate up to 13
(0----l -. m
.,.. 0- 1 (3-'
-./ ~.
[6
different components.
• When you press one of the optional component control area
buttons (A to C), you can control the desired component
without changing the input source of this unit.
N.0til:!.
" This button is operational only when the original remote control supplied with the component has a POWER button.
'2 These buttons operate your DVD recorder only when you set the appropriate remote control code for DVR (see page 75).
74 En
Remote control features
Setlin"i!"molg't:i£f,lrb,·co··
/.,.• ..,., . <. "au. ,;;;'~'~&.4~~ ~ ~j;{ ~ ~
1 While pressing and holding one of the input
selector buttons (G) on the remote control to
You can control other components by setting the
select the input area you want to set up,
appropriate remote control codes. For a complete list of
available remote control codes, refer to "List of remote press ®AV POWER for more than 3
control codes" at the end of this manual. seconds.
IT] X" SIRIUS
Remote control code default settings c:::::J c:::::J c:::::J
0"00 POWER
:~Oij
You may not be able to operate your Yamaha component even if a
Yamaha remote control code is preset as listed above. In this case,
try setting another Yamaha remote control code.
75 En
•
Advanced setup
This unit has additional menus that are displayed in the • Speaker impedance SF' I t1F'.
front panel display. The advanced setup menu offers (U.S.A. and Canada models only)
additional operations to adjust and customize the way this Use this feature to set the speaker impedance of this unit
unit operates. Change the initial settings (indicated in bold so that it matches that of your speakers.
under each parameter) to reflect the needs of your Choices: ao MIN, 60 MIN
listening environment. • Select "80 MIN" to set the speaker impedance to 8 O.
• Select "60 MIN" to set the speaker impedance to 6 O.
No~i
• Only @STANDBY/ON, (6)PROGRAM <J I C>, and
@STRAIGHT are effective while you are using the advanced
setup menu. Front (A or B)
• No other operations can be made while you are using the 1 - - - - - - - The impedance of each
advanced setup menu. 8QMIN Center speaker must be 8 Q or
• The advanced setup menu is only available in the front panel 1- higher.
display. Surround
Front (A or B)
1 Press @STANDBY/ON to set this unit to the 1 - - - - - - - The impedance of each
6QMIN Center speaker must be 6 Q or
standby mode.
1 - - - - - - - higher.
Surround
2 Press and hold@TONE CONTROL and
then press @STANDBY/ON to turn on this • SIRIUS Satellite Radio Parental Lock
unit. code number reset SSR F' n~
This unit turns on, and the advanced setup menu Use this feature to set the code number for the SIRIUS
appears in the front panel display. Satellite Radio Parental Lock feature to the initial factory
setting.
3 Press (b)PROGRAM <lIt> to select the Choices: RESET, CANCEL
• Select "RESET' to set the code number to the initial
parameter you want to adjust.
factory setting.
The name of the selected parameter appears in the
• Select "CANCEL" to set the code number to the initial
front panel display.
factory setting.
76 En
Advanced setup
• Initializing UH T•
Use this feature to reset all the parameters of this unit to
the initial factory settings (see page 87).
Choices: CANCEL, RESET
• Select "CANCEL" not to reset any parameters of this
unit.
• Select "RESET' to reset the parameters of this unit.
77 En
•
Troubleshooting
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, tum off this unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
• General
This unit falls to turn The power cable is not connected or the Connect the power cable firmly.
on or enters the plug is not completely inserted.
standby mode soon
after the power is The speaker impedance setting is Set the speaker impedance to match your speakers. 21
turned on. incorrect.
The protection circuitry has been Make sure that all speaker wire connections on this II
activated. unit and on all speakers are secure and that the wire
for each connection does not touch anything other
than its respective connection.
This unit has been exposed to a strong Set this unit to the standby mode, disconnect the
external electric shock (such as lightning power cable, plug it back in after 30 seconds and then
or strong static electricity). use it normally.
No sound. Incorrect input or output cable Connect the cables properly. If the problem persists, 13-18
connections. the cables may be defective.
No appropriate Audio input jack select has Set an appropriate Audio input jack select. 34
been set.
Audio input jack select is set to "HOM!", Set Audio input jack select to "AUTO". 34
"COAX/OPT" or "ANALOG".
Audio input jack select is set to Set Audio input jack select to "AUTO" or 34
"ANALOG" while playing a source "COAX/OPT".
encoded in Dolby Digital or DTS.
No appropriate input source has been Select an appropriate input source with 33
selected. @INPUT <II [> (or the input selector buttons(@)).
The front speakers to be used have not Select the front speakers with Q)SPEAKERS. 33
been selected properly.
Signals this unit cannot reproduce are Playa source whose signals can be reproduced by this
being input from a source component, unit.
such as a CD-ROM.
The HOM! components connected to this Connect HOM! components that support the HDCP 14
unit do not support the HDCP copy copy protection standards.
protection standards.
78 En
Troubleshooting
The sound suddenly The protection circuitry has been activated Check that the impedance setting is correct. 21
goes off. because of a short circuit, etc.
Check that the speaker wires are not touching each
other and then turn this unit back on.
The sleep timer has turned off this unit. Turn on this unit, and play the source again.
Sound Is heard from Incorrect cable connections. Connect the cables properly. If the problem persists, 11-18
the speaker on one the cables may be defective.
side only.
Incorrect settings in "SP LEVEL". Adjust the "SP LEVEL" settings. 41
Only the center When playing a monaural source with a This is not malfunction.
speaker outputs CINEMA DSP program, the source signal
substantial sound. is directed to the center channel, and the
front and surround speakers output effect
sounds.
No sound Is heard "CENTER SP" in "SPEAKER SET' is set Set "CENTER SP" to "SML" or "LRG". 63
from the center to "NONE".
speaker.
Some sound field programs do not output Try another sound field program. 38
sounds from the center speaker.
No sound is heard "SUR. L1R SP" in "SPEAKER SET' is Set "SUR. L1R SP" to "SML" or "LRG". 64
from the surround set to "NONE".
speakers,
This unit is in the "STRAIGHT' mode Press @STRAIGHT so that "STRAIGHT" 39
and a monaural source is being played disappears from the front panel display.
back.
No sound from the "FRONT B" in "SPEAKER SET' is set to Set "FRONT B" to "FRONT'. 63
center, surround "ZONEB",
speakers when the
FRONT B speakers
are activated.
No sound is heard "LFEIBASS OUT' in "SPEAKER SET' Set "LFEIBASS OUT' to "SWFR" or "BOTH". 64
from the subwoofer. is set to "FRNT' when a Dolby Digital or
DTS signal is being played.
79 En
•
Troubleshooting
Dolby Digital o.r DTS The connected component is not set to Make an appropriate setting following the operating
sources cannot be output Dolby Digital or DTS digital instructions for your component.
played. (Dolby Digital signals.
or DTS Indicator In
the front panel Audio input jack select is set to Set Audio input jack select to "AUTO". 34
display does not light "ANALOG".
up.)
A humming sound Is Incorrect cable connections. Connect the audio cables firmly. If the problem
heard. persists, the cables may be defective.
The volume level You are attempting to set the volume level Adjust "MAX VOL." setting. 67
cannot be increased, higher than the maximum volume level.
or the sound Is
distorted. The component connected to the AUDIO Turn on the power of the component.
OUT (REC) jacks of this unit is turned
off.
The sound effect It is not possible to record the sound effect This is not malfunction.
cannot be recorded. with a recording component.
A source cannot be The source component is not connected to Connect the source component to the analog AUDIO 14,18
recorded by an the analog AUDIO IN jacks of this unit. IN jacks.
analog component
connected to the
AUDIO OUT (REC)
Jacks.
The sound field "MEMORY GUARD" in "OPTION Set "MEMORY GUARD" to "OFF'. 70
parameters and some MENU" is set to "ON".
other settings of this
unit cannot be
changed.
This unit does not The internal microcomputer has been Disconnect the power cable from the AC wall outlet
operate properly. frozen by an external electric shock (such and then plug it in again after about 30 seconds.
as lightning or excessive static electricity)
or by a power supply with low voltage.
No sound is heard The HDMI component does not accept the Convert the multi-channel audio signals to the
from the connected multi-channel audio signals. 2-channel audio signals at the source component such
HDMI component. as a DVD player.
"CHECK SP WIRES" Speaker cables are short-circuited. Make sure all speaker cables are connected correctly. II
appears in the front
panel display.
There is noise This unit is too close to the digital or Move this unit further away from such equipment.
interference from high-frequency equipment.
digital or radio
frequency equipment.
The picture is The video source uses scrambled or This in not malfunction.
disturbed. encoded signals to prevent dubbing.
This unit suddenly The internal temperature is too high and Wait about 1 hour for this unit to cool down and then
enters the standby the overheat protection circuitry has been turn it back on.
mode. activated.
BOEn
Troubleshootmg
• Tuner
There Is distortion, and There is multi-path interference. Adjust the antenna position to eliminate
clear reception cannot multi-path interference.
be obtained even with a
FM good FM antenna.
The desired station The signal is too weak. Use a high-quality directional FM antenna.
cannot be tuned into
with the automatic Use the manual tuning method. 43
tuning method.
Previously preset This unit has been disconnected for a Set preset stations. 44
stations can no longer long period.
be tuned Into.
The desired station The signal is weak or the antenna Tighten the AM loop antenna connections
cannot be tuned Into connections are loose. and orient it for the best reception.
with the automatic
tuning method. Use the manual tuning method. 43
AM There are continuous Noise can result from lightning, Use an outdoor antenna and a ground wire.
crackling and hissing fluorescent lamps, motors, thermostats This will help somewhat, but it is difficult to
noises. and other electrical equipment. eliminate ail noise.
There are buzzing and A TV set is being used nearby. Move this unit away from the TV set.
whining noises.
81 En
•
Troubleshootmg
• XM Satellite Radio
If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel
display. In this case, read the cause and follow the corresponding remedies.
The XM Mini-Tuner is not installed in the Confirm the XM Mini-Tuner is fully seated in the 46
XM Mini-Tuner Dock orthe XM dock and check the XM Mini-Tuner Dock cable is
Mini-Tuner Dock is not connected to this connected to this unit.
unit.
CHECK RtHEt·U·!R The XM antenna is not connected to the Check that the XM antenna is securely connected to 46
XM Mini-Tuner Dock or the XM antenna the XM Mini-Tuner Dock and check the antenna
cable has become damaged. cable for damage. Replace the XM antenna if the
cable is damaged.
CH Ut·!RUTH You may be attempting to tune to an XM Consult the latest channel guide at 47
channel that is blocked or that you cannot http://www.xmradio.coml(US residents) and
receive with your XM subscription http://www.xmradio.ca/(Canadian residents) for the
package. current list of channels. For information on receiving
this channel, visit http://www.xmradio.coml(US
residents) and http://www.xmradio.ca/(Canadian
residents) or contact XM Satellite Radio at
1-800-967-2346 (US residents) and 1-877-GET
XMSR (Canadian residents).
The XM Mini-Tuner is not receiving the Check for antenna obstructions and reposition the 46,72
XM satellite signal. Something may be XM antenna to get better signal reception. Use the
blocking the XM antenna's view of the "XM RADIO SET" screen in the video monitor to
satellites or the antenna is not properly check the antenna reception level. See instructions
aimed. supplied with the XM Mini-Tuner and Dock for
antenna installation information.
LORD I t'!!3 The XM Mini-Tuner is acquiring audio or This message should disappear in a few seconds in 72
program information from the XM good signal conditions. If you see this message often,
satelli te signal. This message can also reposition the XM antenna to get better signal
occur in weak XM signal conditions. Note reception. Use the "XM RADIO SET' screen in the
that this unit may not respond to some video monitor to check the antenna reception level.
operations while this message is
displayed.
OFF i=lIR The XM channel you selected is not Check back at a later time; in the mean time, select
currently broadcasting. another channel.
CH Ut·~RI.)R I Li=lBLE The selected channel is not available. The Consult the latest channel guide at
channel may have been reassigned to a http://www.xmradio.coml(US residents) and
different channel number. This message http://www.xmradio.ca/(Canadian residents) for the
may occur initially with a new XM current list of channels. For cases of a new XM
Mini-Tuner or a XM Mini-Tuner that has Mini-Tuner or a XM Mini-Tunerthat has not received
not received XM's signal for an extended XM's signal for an extended period, allow the XM
period. Mini-Tuner to receive the XM satellite signal for at
least 5 minutes and then try to select the channel
again.
82 En
Troubleshooting
RtHEt·n·lR ERROR The antenna is not connected to the Check the connection of the antenna and 51
SiriusConnect tuner properly. SiriusConnect tuner.
CHECK SR TUt·4ER The SiriusConnect tuner is not connected Check the connection of the SiriusConnect tuner and 51
to the SIRIUS jack of this unit correctly. this unit.
The SiriusConnect tuner is not connected Connect the power cable of the SiriusConnect tuner to 51
to the AC wall outlet. the AC wall outlet.
t·40T SUPPORTED This unit does not support the connected Connect the SiriusConnect tuner that this unit 51
SIRIUS Satellite Radio tuner. supports.
RCG!U I RI t·lG The signal is too weak. Adjust the orientation of the antenna of the 51,56
SiriusConnect tuner. Use the "ANTENNA INFO"
information in the front panel display or "SIRIUS
Information" screen in the video monitor to check the
antenna reception level.
UPDRT I t·m The SiriusConnect tuner is updating the Wait until the updating is complete.
channel list.
The period of the subscription is end. Contact SIRIUS Satellite Radio to renew the 52
subscription.
F/I.J UPDRT It¥3 The SiriusConnect tuner is updating the Wait until the updating is complete.
firmware.
CRLL SIRIUS The selected channel is not subscribed. Contact SIRIUS Satellite Radio to subscribe the 52
(CRLL selected channel.
:388-53'3-S I RI US URL: https:/Iactivate.siriusradio.coml
Phone: 1-888-539-SIRIUS (1-888-539-7474)
TO SUBSCRIBE)
Select another channel. 52
t'l,:)t R'.).:1i lab 1Eo The operation you made is not available.
83 En
•
Troubleshootmg
• AUTO SETUP
Before AUTO SETUP
Connec t t1 I C ~ Optimizer microphone is not connected. Connect the supplied optimizer microphone 24
to the OPTIMIZER MIC jack on the front
panel.
E-l: t·m FRotH SP Front LlR channel signals are not detected. Check the front LlR speaker connections. 11
E-2: t·jO SUR. SF' A surround channel signal is not detected. Check the surround speaker connections. 11
E-4: t·mIS'/ Background noise is too loud. Try running "AUTO SETUP" in a quiet
environment.
E-6: t·m t1IC The optimizer microphone was unplugged Connect the supplied optimizer microphone 24
during the "AUTO SETUP" procedure. to OPTIMIZER MIC jack on the front
panel.
E-7: t·m SIl3t·j!=lL The optimizer microphone does not detect Check the microphone setting. 24
test tones.
Check the speaker connections and 10, II,
placement. 24
E-:3: USER C!=ItK:EL The "AUTO SETUP" procedure was Run "AUTO SETUP" again. 24
cancelled due to user activity.
84 En
Troubleshooting
W-l:0UT OF PH~SE Speaker polarity is not correct. This Check the speaker connections for proper 12
message may appear depending on the polarity (+ or -).
, speakers even when the speakers are
connected correctly.
W-2:0UER 24M (80ft) The distance between the nearest speaker Bring the speaker closer to the listening
and the furthest speaker is out of adjustable position.
range,
I.J-3: LEI.JEL EI':F~OR The difference of volume level among If "SWFR:TOO LOUD" or "SWFR:TOO 24,65
speakers is excessive. (No level correction LOW" appears, adjust the output volume of
is made.) the subwoofer.
• If the "ERROR" or "WARNING" screens appears, check the cause of the problem, then run "AUTO SETUP" again.
• If a warning message "W-I", "W-2", or "W-3" appears, corrections are made, but they may not be optimal.
• If an error message "E-9" occurs repeatedly, please contact a qualified Yamaha service center.
• iPod
Nj,1!J
In case of a transmission error without a status message appearing in the front panel and in the OSD, check the connection to your iPod
(see page 19).
Conneet er·r·o)t-· There is a problem with the signal path Turn off this unit and reconnect the Yamaha iPod 19
from your iPod to this unit. universal dock to the DOCK terminal of this unit.
Unk tKol.Jn i Pod The iPod being used is not supported by Only iPod (Click and Wheel), iPod nano, and iPod
this unit. mini are supported.
Your iPod was removed from a Yamaha Station your iPod back in a Yamaha iPod universal 19
iPod universal dock (YDS-IO, sold dock (YDS-IO, sold separately) connected to the
separately) connected to the DOCK DOCK terminal of this unit.
terminal of this unit.
UtBb 1e to::O p 1.:";:1 This unit cannot play back the songs Check that the songs currently stored on your iPod
currently stored on your iPod. are playable.
85 En
•
Troubleshootmg
• Bluetooth
The Bluetooth adapter is not connected to Connect the Yamaha Bluetooth adapter (such as 19
the DOCK terminal. YBA-IO, sold separately) to the DOCK terminal.
86 En
Troubleshooting
• Remote control
The remote control Wrong distance or angle. The remote control functions within a maximum 23
does not work nor range of 6 m (20 ft) and no more than 30 degrees
function properly. off-axis from the front panel.
87 En
•
Glossary
• CINEMA DSP • Dolby Pro Logic II
Since the Dolby Surround and DTS systems were Dolby Pro Logic II is an improved technique used to
originally designed for use in movie theaters, their effect decode vast numbers of existing Dolby Surround sources.
is best felt in a theater having many speakers designed for This new technology enables a discrete 5-channel
acoustic effects. Since home conditions, such as room playback with 2 front left and right channels, I center
size, wall material, number of speakers, and so on, can channel, and 2 surround left and right channels instead of
differ so widely, it is inevitable that there are differences in only I surround channel for conventional Pro Logic
the sound heard. Based on a wealth of actually measured technology. There are three modes available: "Music
data, Yamaha CINEMA DSP uses Yamaha original sound mode" for music sources, "Movie mode" for movie
field technology to combine Dolby Pro Logic, Dolby sources and "Game mode" for game sources.
Digital and DTS systems to provide the audiovisual
experience of a movie theater in the listening room of your • Dolby Surround
own home. Dolby Surround uses a 4-channel analog recording system
to reproduce realistic and dynamic sound effects: 2 front
• Component video signal left and right channels (stereo), a center channel for dialog
With the component video signal system, the video signal (monaural), and a surround channel for special sound
is separated into the Y signal for the luminance and the PB effects (monaural). The surround channel reproduces
and PR signals for the chrominance. Color can be sound within a narrow frequency range. Dolby Surround is
reproduced more faithfully with this system because each widely used with nearly all video tapes and laser discs,
of these signals is independent. The component signal is and in many TV and cable broadcasts as well. The Dolby
also called the "color difference signal" because the Pro Logic decoder built into this unit employs a digital
luminance signal is subtracted from the color signal. A signal processing system that automatically stabilizes the
monitor with component input jacks is required in order to volume on each channel to enhance moving sound effects
output component signals. and directionality.
88 En
Glossary
89 En
•
Specifications
AUDIO SECTION • Signal Level
• Minimum RMS Output Power for Front, Center, Surround Composite I Vp-p/75 n
[U.S.A. and Canada models] Component I Vp-p/75 n (Y), 0.7 Vp-pl75 n (P8/PR)
I kHz, 0.9% THO, 8 n 105 W • Signal to Noise Ratio 50 dB or more
[Other models]
I kHz, 0.9% THO. 6 n 105 W • Maximum Input Level 1.5 Vp-p or more
• Maximum Power for Front, Center. Surround (JEITA) • Frequency Response (MONITOR OUT)
I kHz, 10% THO. 6 n 130 W Component Signal 5 Hz to 60 MHz, -3 dB
90 En
I
Index
• Symbols C)SP DISTANCE, Sound menu 65 • 0
<XM> - --. C)VOLUME TRIM, Input menu 69 D)CENTER GEQ, Sound menu 66
XM tuning status message 82 CALL SIRIUS, SIRIUS Satellite Radio D)DECODER MODE. Input menu 69
status message 83 D)PARAM. INI, Option menu 71
• Numerics Canceled. Troubleshooting 86 Decoder indicators 22
I SOUND MENU. Manual setup 61 CAT SEARCH. XM tuning 53 Decoder mode, Input menu 69
21NPUT MENU, Manual setup 61 Category Search mode, XM tuning .48 Decoder select mode, Decoder mode .. 69
2ch Stereo, Sound field program 38 CD player. Connection 18 DIGITAL AUDIO COAXIAL jacks 13
3 OPTION MENU 70 CD recorder. Connection 18 DIGITAL AUDIO OPTICAL jacks 13
3 OPTION MENU. Manual setup 62 CENTER SP. Speaker settings 63 DIMENSION.
5ch Stereo, Sound field program 38 Center speaker equalizer, Sound field parameter 40
Sound menu 66 Dimension, Sound field parameter 40
Center speaker, Speaker settings 63 DIMMER, Display settings 70
•A)DISPLAY
A SET, Option menu 70 Center width, Sound field parameter .. .40 Dimmer, Display settings 70
A)INPUT ASSIGNMENT, CHECK ANTENNA, XM tuning status DIRECT 41
Input menu 68 message 82 Direct Number Access mode.
A)SPEAKER SET, Sound menu 63 CHECK SR TUNER, SIRIUS Satellite XM tuning 48
A.DELAY, Audio settings 66 Radio status message 83 Direct number access mode,
ACQUIRING. SIRIUS Satellite Radio CINEMA DSP indicator 23 XM tuning 53
status message 83 COAXIAL IN (1), Input assignment 68 Disconnected,
Activating XM Satellite Radio .47 COAXIAL INPUT assignment, Bluetooth status message 86
ALL CH SEARCH. XM tuning 53 Input assignment 68 Disconnected,
All Channel Search mode, COAXIAL INPUT jacks 68 iPod controlling status message 85
XM tuning .48. 53 Completed. Bluetooth status message .. 86 Display settings. Option menu 70
AM antenna connection 20 COMPONENT VIDEO jacks 13 Displaying the XM Satellite Radio
AM tuning 43 Connect error, iPod controlling status information 50
Amplifier function OSD display time, message 85 DIST 26
Display settings 70 Connect MICl, DIST, Auto setup result 26
ANTENNA ERROR. SIRIUS Satellite Auto setup error message 84 DISTANCE 25
Radio status message 83 Connecting to the FRONT A DISTANCE. Auto setup 25
Audio components, Connection 18 terminals 12 DOCK indicator 22
Audio delay, Audio settings 66 Connection, AM antenna connection 20 DSPLEVEL,
Audio information 36 Connection, Audio components 18 Sound field parameter 40
Audio input jacks selection 34 Connection, CD player 18 DSP level. Sound field parameter 40
AUDIO jacks 13 Connection, CD recorder 18 DTS decoder prioritize setting.
Audiojacks 13 Connection, DVD player 16 Decoder mode 69
AUDIO SELECT 34 Connection, DVD recorder 17 DVD player connection 16
Audio select, Option menu 71 Connection, external decoder 18 DVD recorder connection 17
Audio settings, Sound menu 66 Connection, FM antenna 20 Dynamic range, Sound menu 66
Audio signal flow 14 Connection, HOMI 14
AUTO SETUP 24 Connection, MD recorder 18 • E
AUTO SETUP, Error message 84 Connection, Multi-format player 18 E)LFE LEVEL, Sound menu 66
Automatic preset tuning. Connection, Power cable 20 E)MULTI CH SET, Input menu 69
FMIAM tuning 44 Connection, PVR 17 E)XM RADIO SET,
Automatic tuning, FM/AM tuning .43 Connection, set-top boxes 17 Option menu 71, 72
Connection, VCR 17 E-I:NO FRONT SP,
• B Connection, Video components 15 Auto setup error message 84
B)INPUT RENAME, Input menu 68 Connection, E-2:NO SURR.SP,
B)MEMORY GUARD, Yamaha iPod universal dock 19 Auto setup error message 84
Option menu 70 Controlling a TV 73 E-4:NOISY,
B)SPEAKER LEVEL, Sound menu 65 Controlling other components, Auto setup error message 84
Background Video, Remote control 74 E-6:NOMIC,
Multi channel input setup 69 Controlling this unit, Remote control 73 Auto setup error message 84
BGV, Multi channel input setup 69 Creating original SCENE templates 31 E-7:NO SIGNAL.
Bluetooth setting, Option menu 71 CROSSOVER, Speaker settings 64 Auto setup error message 84
BT connected, Crossover, Speaker settings 64 E-8:USER CANCEL,
Bluetooth status message 86 CT WIDTH, Sound field parameter .40 Auto setup error message 84
•
Current status display 35 E-9:INTERNAL ERROR,
• C Auto setup error message 84
C)AUDIO SELECT. Option menu 71 Effect level, Sound field parameter 40
91 En
Index
ENHANCER indicator 22 • 0
Exchange. Preset station. •Jazz, JSound field program 38 OFF AIR.
FM/AM tuning 45 XM tuning status message 82
External decoder connection 18 OPTICAL IN (2), Input assignment 68
•LFEIBASS
L OUT, Speaker settings 64 OPTICAL IN (3), Input assignment 68
• F LFElBass out. Speaker settings 64 OPTICAL INPUT assignment.
F)DYNAMIC RANGE. LOADING. Input assignment 68
Sound menu 66 XM tuning status message 82 OPTIMIZER MIC jack. Auto setup 24
F)XM RADIO SET 72 Loading.... Optimizer microphone 24
FIW UPDATING, SIRIUS Satellite Radio iPod controlling status message ....... 85 Optimizer microphone, Auto setup 24
status message 83 Low-frequency effect level, Optimizing speaker setting 24
Factory presets, Advanced setup 77 Sound menu 66 Option menu. Manual setup 62
FL SCROLL, Display settings 70 LYL 26 OSD SHIFT, Display settings 70
FM antenna 20 LYL. Auto setup result 26 OSD shift. Display settings 70
FM antenna connection 20 OSD-AMP. Display settings 70
FM tuning 43 OSD-SOURCE. Display settings 70
FRONT B speaker setting, •Manual
Mpreset tuning. Other components controlling
Speaker settings 63 FM/AM tuning 44 by remote control 74
FRONT B. Speaker settings 63 MANUAL SETUP. SET MENU 61 Other components controlling.
Front panel display 22 Manual setup. SET MENU 61 Remote control 74
Front panel display scroll. Manual tuning. FM/AM tuning .43
Display settings 70 MAX YOL.. Audio settings 67 • P
FRONT SP, Speaker settings 63 Maximum volume, Audio settings 67 PANORAMA.
Front speakers, Speaker settings 63 MD recorder. Connection 18 Sound field parameter 40
Memory guard, Option menu 70 Panorama. Sound field parameter 40
Menu browse mode. iPod controlling .. 58 Parameter initialization.
•G)AUDIO
G SET, Sound menu 66 Movie Dramatic. Option menu 71
G)SIRIUS SET 72 Sound field program 38 PARENTAL LOCK,
G)SIRIUS SET. Option menu 72 Movie Spacious, SIRIUS Satellite Radio setting 72
Games. Sound field program 38 Sound field program 38 PCM indicator 22
MULTI CH INPUT component PHONES jack 35
•H) HDMI
H SET, Sound menu selection 34 Play information display,
67 Multi channel input setup. iPod controlling 58
Hall. Sound field program 38 Input menu 69 Playing video sources
HDMI indicator 22 Multi-channel source in the background 36
HDMI set. Sound menu 67 with headphones 39 PLII Game 39
HDMI. Connection 14 Multi-format player connection 18 PLII Movie 39
HEADPHONE. Dynamic range 66 Multi-information display 23 PLII Music 39
Headphone. Dynamic range 66 Music Enh. 2ch, Pop/Rock. Sound field program 38
HEADPHONE. Sound field program 38 Power cable, Connection 20
Low-frequency effect level 66 Music Enh. 5ch. Preset channel setting.
Headphone. Sound field program 38 XM tuning 49. 54
Low-frequency effect level 66 MUTE 35 Preset SCENE templates 30
Headphones 35 MUTE indicator 22 Preset Search mode.
Headphones indicator 22 MUTE TYPE. Audio settings 66 XM tuning 48, 53
•
Infrared window, Remote control 23
Muting
• N
35 PRESET SEARCH,
XM tuning
Preset station exchange,
53
IN!. YOL.. Audio settings 67 Neural Surround 39 FM/AM tuning 45
Initial volume. Audio settings 67 Night listening mode .42 Preset station selection.
Input assignment. Input menu 68 No BT Adapter, FM/AM tuning 45
Input channel and speaker indicators 23 Bluetooth status message 86 PRESET. Advanced setup 77
Input channel indicators 23 NO SIGNAL. Pro Logic 39
Input menu, Manual setup 61 XM tuning status message 82 Pure hi-fi sound 41
Input rename, Input menu 68 Not Available. SIRIUS Satellite Radio PYR connection 17
Input source indicators 22 status message 83
Input source information display 36 NOT SUPPORTED, SIRIUS Satellite • R
INY ALID, SIRIUS Satellite Radio Radio status message 83 Remote control codes iii
status message 83 Number of speakers 26 Remote control, Troubleshooting 87
iPod connected, iPod controlling status Number of speakers, Rename, SCENE template 31
message 85 Auto setup result 26 Repeat 58
iPod control, Status message 85 Repeat. iPod controlling 58
iPod using 57 Resetting the system 87
92 En
Index
•
panel or the remote control. Refer to the
attached sheet or the pages at the end of this
SPEAKER, Dynamic range 66 •W-l:0UT
W OF PHASE, manual for the infonnation about each
Speaker, Dynamic range 66 position of the pans.
Auto setup error message 85
93 En
• Front panel
• Remote control
ii
List of remote control codes
iii
Akai OOS9,OO6S,Ol27, Cascade 0208 Envision 0060,0061 Hisawa 0209,0218
0129,0130,0200, Cathay 0213,0217 Erres 0213,0217 Hitachi 0006, 0014, OOIS,
0204,0208,0209, CCE 0127 ESA 0080 0016,0042,0060,
0213,0217,0218, Celebrity OOS9 Etron 0208 0061, 009S, OIOS,
02SS Centurion 0213,0217 Euro-Feel 0206 0127, 0lS6, 0179,
Akiba 0209,0218 Century 020S Euroline 0217 0180,0204,0207,
Akum 0206,0209,0218 CGE 0214,021S Euroman 0200 0210,0211,02IS,
Alaron 0200 Cimline 0208,0218 Euromann 0206, 0207, 0213 0216,02S1
Alba 0200,0207,0208. Citizen 0060, 0061. 0062, Europhon 0200,0204,0207. Hornyphon 0213
0209.0217,0218 0064 0213,021S Hoshai 0209,0218
ALBIRAL 0212 City 0208 Fenner 0208 Huanyu 0200,0207
Allstar 0213 Clarivox 0212.0217 Ferguson 0212,0217,0226 Hygashi 0200,0207
Amplivision 0207 Clatronic 0206.0207,0208. Fidelity 0200,0207,0210 Hyper 0200,0207,0208,
Amstmd 0204. 0206. 0208. 0209.0213.0214, Finlandia 0210 0214,021S
0209.0218 0218 Finlux 0204, 020S. 0207, Hypson 0206,0207,0213.
Amtron 0062 CMS 0200 0213. 021S, 0217 0217
Anam 0208 Colortyme 0060.0061 Firstline 0200, 0207, 0208, ICE 0127, 0200, 0206,
Anam National 0062 Concerto 0060.0061 0213,0214 0207,0208,0209,
Anglo 0208 Concorde 0208 Fisher 0064,0127,0128. 0213,0218
Anitech 0206.0208 Condor 0200.0207,0213 020S,0207,02IS ICeS 0200,0218
Ansonic 0203,0208 Contec 0200,0207,0208 Flint 0213,0218 IMA 0062
AOC 0060.0061 Contec/Cony 0062 Forrnenti 0200, 020S, 0207, Imperial 0211,0213,0214,
Apex 0118.0122.0132 Continental Edison 021S,0217 021S
Arc en Ciel 0216 0216 Forrnenti- Phoenix Indiana 0213,0217
Arcam 0200 Cosmel 0208 0200 Infinity 0063
Arcam Delta 0207 Craig 0062 Fortress 020S Ingelen 0211
Aristona 02[3.0217 Crosley 020S.0214,021S Frontech 0206,0208,0210, Ingersol 0208
ASA 020S,02\1 Crown 0062.0063.0128. 02\1.0214 Inno Hit 0201,0204,0207.
Asberg 0213 0208,0213.0217 Fujitsu 0023,0024,002S, 0208,0209,0213,
Astm 0208 CS Electronics 0200.0207,0209. 0088,0127 0217,0218
Asuka 0200,0206,0207, 0214,0218 Funai 0033.0034,003S. Innovation 0206,0208
0209,0218 CTC 0214 0036. 0037, 0062. Interbuy 0208,0214
Atlantic 0200,0207,0213. Curtis Mathes OOS7. 0060. 0061. 0206 Interfunk 020S, 021 I, 0213,
0217 0064,006S Futuretech 0062 0214,0216,0217
Atori 0208 CXC 0062 Gateway 0094 International 0200
Audiosonic 0207,0208,0209, Cybertron 0209,0218 GBC 0208.021S,0218 Intervision 0206,0207,0218
0213.0216,0217, Daewoo 0060,0061,0120, GE OOS7. 0060, 0061, Irradio 0201,0208,0209,
0218 0127, OISS, 0193, 0122,0147 0213,0217,0218
AudioTon 0207 0200,0207,0208, GEC 0204.0207,021 I, Isukai 0209,0218
Audiovox 0062 0213.0218,0238 0213,0217 ITC 0207,021S
Autovox 020S,0206,0207 Dainichi 0200,0209,0218 Geloso 0208. 0210, 021S ITS 0200,0209,0213,
Awa 0200 Dansai 0200.0206.0213, General Technic 0208 0218
Baird 0216 0217 Genexxa 0209.0211,0213. ITT 0129,0208.0211
Bang & Olufsen 020S Dantax 0217 0218 lTV 0208,0217
Basic Line 0208,0209,0213. Daytron 0060, 0061. 0208 Gibralter 0060 JBL 0063
0218 De Graaf 0210 GoldHand 0200 JCPenney OOS7,0060,006I
Bastide 0207 Decca 0204,0207,0213, GoldStar 0060.0061,0127. JCB OOS9
Baur 0217 0217 0128.0200,0201. Jensen 0060,0061
Beko 0228 Desmet 0213,0217 0207,0208,0210. JVC 0017,0018.0019.
Belcor 0060 Diamond 0200 0213.0214,02IS. 0108,Ol36,OlS3,
Bell & Howell OOS8,OO64 Dimensia OOS7 0217 0178,0190,0213,
Benq 0081 Dixi 0208, 0213, 0217 Goodmans 0171,0201.0204. 0218
Beon 0213,0217 DTS 0208 0206.0208.0213. Kaisui 0200,0207,0208,
Bestar 0213 Dual 0207,021S,0216 0217,0240 0209,0218
Binatone 0207 Dual-Tec 0207, 0208, 021S GPM 0209.0218 Kamosonic 0207
Black Star 0214 Dumont 0060,0127,020S, Gmetz 0211 Kamp 0200,0207
Blaupunkt 02SS 0207 Granada 0204, 0207, 0210. Kapsch 0211
Blue Sky 0209,0218 Dumbrand 0126 0213.0217 Karcher 0207, 0208, 0212.
Bondstec 0214 Dux 0217 Grandin 0208,0209.0217 0217
Boots 0207 Dynatron 0213.0217 Grundig 0128,0130.0222. Kawasho OOS9, 0060, 0061,
Bradford 0062 Elbe 0203,0204,0212, 0236,02SS 0200
Brandt 0216,0226 0218 Grunpy 0062 Kendo 0128,0210
Brionvega 020S. 0213, 0217 Elbe-Sharp 0204 Halifax 0200.0206.0207 Kennedy 021S
Britannia 0200,0207 Elcit 0204,020S Hallmark 0060.0061 Kenwood 0060.0061
Brockwood 0060 ELECTRO TECH Hampton 0200.0207 Kingsley 0200.0207
Broksonic 0138 0208 Hanseatic 0203.0207,0208. Kloss Novabeam
Bruns 020S Electroband OOS9 0213.021S,0217 0062
BSR 021S Electrohome OOS9. 0060. 0061 Hantarex 0204,0208 Kneissel 0203
BTC 0209.0218 Elin 0200,0207,0213. Harvard 0062 Koister 0213
Bush 0177.0208,0209, 0217 HCM 0206, 0207. 0208. Konka 0209.0218
0210, 0213, 021S, Elite 0209,0213,0218 0218 Korpel 0213,0217
0216,0217,0218, Elman 021S Hifivox 0216 Korting 020S
0230,0237 Ella 0200,0208 Higashi 0200 Koyoda 0208
Candle 0060,0061 Emerson 0060, 0061, 0062, Hinari 0208,0209,0213. KTV 0062,0127.0207
Capsonic 0206 0064,Ol28,020S 0217.0218 Kyoto 0200,0212
iv
Lenco 0208 NEC 0026,0053,0060, 0182,0194,0195, Sanyo 0020,0021, 0022,
Lenoir 0207,0208 0061,0096,0127 0211,0213,0216, 0049,0060,0064,
Lesa 0214 Neckennann 0205, 0207, 0210, 0217,0250 0127,0128,0200,
Leyco 0206,0213,0217 0213,0217,0255 Plantron 0206,0213 0203,0207,0215
LG 0016,0038,0039, NEI 0213,0217 Polaroid 0075 SBR 0217
0127,0128,0157, Nesco 0214 Poppy 0208 SCHAUB LORENTZ
0158,0163,0164, NET-TV 0082,0101 Ponland 0060,0061 0211
0166,0188,0189, New Tech 0208,0213 Prandoni-Prince 0204, 0210 Schneider 0207,0209,0213,
0200,0201,0207, New World 0209,0218 Precision 0207 0215,0216,0217,
0208,0210,0213, Nicamagic 0200,0207 Prima 0208,0211 0218
0214,0215,0217 Nikkai 0200,0206,0207, Profex 0208 Scotch 0061
Liesenk 0217 0209,0213,0217, Profi-Tronic 0213 Scott 0060, 0061, 0062
Life 0206,0208 0218 Proline 0213 Sears 0057,0060,0061,
Lifetec 0206,0208,0218 Nikko 0061 Proscan 0057 0064
Loewe 0063,0128,0203, Nobliko 0200,0207 Prosonic 0200,0207,0217 SEG 0200,0206,0207,
0204,0223,0227 Nogamatic 0216 Protech 0206,0207,0208, 0214,0215,0217
Loewe Opta 0205,0213,0217 Nokia 0129,0211 0213,0214,0215, SEI 0204
Logik 0058 Nordmende 0205,0211,0213, 0217 SEI-Sinudyne 0204, 0205, 02 I 1
Luma 0210,0217 0216 Proton 0060,0061 Se1eco 0210,0211,0215
Lumatron 0210,0213,0217 Nordvision 0217 Provision 0217 Sencora 0208
Lux May 0213 Oceanic 0211 Pulsar 0060 Sentra 0218
Luxman 0060,0061 Olevia 0084 Pye 0213,0217 Serino 0200
Luxor 0201,0207,0210 ONCEAS 0207 Pymi 0208 Sharp 0009,0010,0011,
LXI 0057,0061,0063, Onwa 0062,0218 Quasar 0152,0214 0060, 0061, 0066,
0064 Orbit 0213 Quelle 020 I, 0206, 0207, 0070,0087,0111,
Magnadyne 0204,0205,0214, Orion 0126,0204,0208, 0213,0214,0215, 0143,0145,0167,
0215,0217 0213,0217,0235 0217 0168,0169,0198,
Magnafon 0200,0204,0207 Orline 0218 Radialva 0218 0204,0224,0247,
Magnavox 0060,0061,0063, Orsowe 0204 Radio Shack 0064 0248,0249
0102,0103,0150 Osaki 0127,0206,0207, Radio ShackIReaIistic Shogun 0060
Magnum 0206,0208 0209,0218 0057,0060,0061, Siarem 0204,0205,0215
Majestic 0058 Osio 0201 0062,0064 Sicatel 0212
Mandor 0206 Oso 0209,0218 Radiola 0213,0217 Siemens 0255
Manesth 0206,0207,0213, Osume 0218 Radiomarelli 0204,0205,0214 Sierra 0213
0217 Otto Versand 0204,0207,0213, Radiotone 0213 Signature 0058
Marantz 0060,0061,0063, 0215,0216,0217, RCA 0057,0060,0061, Silva 0200
0090,0213,0217 0255 0091,0133,0135, Singer 0205,0214,0215
Marelli 0205 Pae1 0200,0207 0147,0149 Sinudyne 0204,0205,0215,
Mark 0200,0213,0217 Palladium 0207 Realistic 0064 0217
Matsui 0204,0207,0208, Panama 0200,0206,0207, Revox 0213,0217 Skantic 0211
0210,0213,0217 0208 Rex 0206,0210,0211 Solavox 0211
Mediator 0213,0217 Panasonic 0006,0007,0063, RfT 0203,0205 Sonoko 0206,0207,0208,
Medion 0206,0208 0073,0074,0097, Rhapsody 0200 0213,0217
Megatron 0061 0110,0114,0137, R-Line 0213,0217 Sonolor 0211
Melectronic 0200,0207,0208, 0141,0151,0162, Roadstar 0206,0208,0209, Sontec 0213,0217
0211,0213,0216, 0165,0186,0204, 0218,0237 Sony 0041,0059,0067,
0217 0211, 0244, 0245, Robotron 0205 0085,0086,0174,
Memorex 0058,0061,0064, 0246,0254 Rowa 0200 0196,0199,0208,
0208 Pathe Cinema 0200,0203,0207, RTF 0205 0219,0234
Memphis 0208 0212,0215 Saba 0204, 0205, 0211, Sound & Vision 0209, 0218
Metz 0205 Pathe Marconi 0212,0216 0216 Soundesign 0060,0061,0062
MGA 0060,0061 Pausa 0208 saccs 0212 Soundwave 0213,0217
Micromaxx 0206,0208 Perdio 0200 Saisho 0204,0206,0207, SSS 0060,0062
Microstar 0206,0208 Phi \co 0060,0061,0063, 0208 Standard 0207,0208,0209,
Minerva 0204 0128,0205,0214, Salora 0201,0204,0210, 0213,0218
Minoka 0213 0215 0211,0215 Starlight 0217
Mitsubishi 0006,0015,0016, Philharmonic 0207 Sambers 0204 Starlite 0062
0048,0060,0061, Philips 0040, 0060, 0063, Sampo 0060,0061,0083, Stenway 0218
0104,0112,0113, 0072,0115,0116, 0101 Stem 0210,0211
0125,0205,0213 0124,0130,0150, Samsung 0029,0030, 0031, Sunkai 0208,0218
Mivar 0200, 0201, 0202, 0175,0184,0187, 0032,0044,0045, Sunwood 0208,0213
0203,0204,0207 0205,0207,0213, 0046,0047,0060, Superla 0200,0204,0207
Montgomery Ward 0215,0217,0220, 0061,0065,0068, SuperTech 0200
0058 0221, 0232, 0233, 0069,0071,0079, Supra 0208
MTC 0060,0061,0128, 0252,0253 0087,0127,0128, Supreme 0059
0200 Philips Magnavox 0130,0144,0160, Susumu 0209
Multi System 0217 0124 0161, 0170, 0176, Sutron 0208
Muhitech 0062,0127,0128, Phoenix 0200,0205,0213, 0183,0185,0200, Sydney 0200,0207
0200,0207,0208, 0217 020 I, 0206, 0207, Sylvania 0060,0061,0063,
0210,0214,0215, Phonola 0200,0205,0213, 0208,0213,0217, 0080,0134,0142,
0217 0217 0239,0241,0242, 0148
Murphy 0200,0207 Pilot 0060 0243 Symphonic 0062,0080
NAD 0061 Pioneer 0012,0013,0060, Sandra 0200,0207 Sysline 0217
Naonis 0210 0061,0098,0109, Sansui 0123,0126,0213 Sytong 0200
0117,0128,0181,
V
Tandy 0127,0207,0209, Weltblick 0213,0217 Alba 1044,1050 GoldHand 1050
0211,0218 Weston 0215 American High 1004 Goldstar 1000, 1003, 1042,
Tashiko 0200,0207,0210 White Westinghouse Amstrad 1042 1045
Tatung 0127,0204,0207, 0200,0207,0217 Anitech 1050 Goodmans 1042, 1045, 1050,
0213,0217,0237 Yamaha ססOO, 000 I, 0002, ASA 1045,1046 1069
TCM 0206,0208 0003, 0004, 0005, Asha 1002,1014 Gradiente 1005
Teac 0127 0060,0061 Asuka 1042,1045, 1046, Graetz 1043, 1047
Tee 0207,0208,0214, Yarnishi 0218 1050 Gr.mada 1046, 1047, 1049
0215 Yoko 0200,0206.0207, Audio Dynamics 1000 Grandin 1042, 1045, 1050
Teehwood 0060,0061 0208,0209,0213, Audiovox 1003 Grundig 1046, 1050, 1062
Teknika 0058,0060,0061, 0217,0218 Baird 1042, 1043, 1047 Hanseatic 1045, 1046
0062 Yoa 0209,0218 Basic Line 1044,1050 Harley Davidson I005
Te1eavia 0216 Zanussi 0210 Baur 1046 Harman/Kardon 1000
Telecor 0218 Zenith 0058,0060,0100, Beaumark 1002, 1014 Harwood 1006
Telefunken 0065,0213,0216 0105,0119,0121, Bell & Howell 1001 HCM 1050
Telegazi 0218 0154 Blaupunkt 1046, 1048 Headquarter 1001
Te1etech 0208,0214,0217 Broksonic 1012, 1013 Hinari 1044, 1050
Te1eton 0207 TV/DVD Bush 1044, 1050, 1066 Hisawa 1044
Te1evideon 0200 Aiwa 0139,2055 Calix 1003 Hitachi 1007, 1010, 1039,
Tensai 0208, 0209, 0213, Apex 0132,2049 Candle 1002, 1003 1042, 1043, 1046,
0218 Broksonic 0138,2060 Canon 1004 1049
Tesmet 0213 Bush 0230,2112 CCE 1006 Hughes Network Systems
Tevion 0206,0208 JVC 0136,2053 CGE 1042, 1043 1010
Texet 0200,0207 Panasonic 0137,0254,2054, Cimline 1044,1050 Hypson 1044,1050
Thomson 0191,0192,0207, 2110 Citizen 1002, 1003 Imperial 1042
0213,0216,0226 RCA 0133,0135,2050, Colortyme 1000 Inno Hit 1046,1050
Thorn 0212,0217 2051 Colt 1006 Innovation 1044, 1048
TMK 0060,0061 Sylvania 0134,2052 Craig 1002, 1003, 1006, Instant Replay 1004
Tokai 0213 Thomson 0226,2109 1014 Interbuy 1045
Tokyo 0200,0207 Toshiba 0131,0231,2048, Crown 1050 Interfunk 1046, 1047
Toshiba 0027,0043,0053, 2111 Curtis Mathes 1000, 1002, 1004, Intervision 1042
0054,0064, 0078, 1009 Irradio 1045, 1050
0089,0090,0106, TV/DVDNCR Cybernex 1002, 1014 ITT 1043, 1047
0107,0127,0131, Panasonic 0141,1040,2057 Daewoo 1005, 1038, 1061, lTV 1045
0140,0146,0159, Samsung 0241, 1070,2113 1067 JCPenney 1000,1001,1002,
0197,0225,0231, Sharp 0143, 1028,2059 Dansai 1050 1003, 1004, 1006
0237 Sylvania 0142,1041,2058 Danlax 1044 JCL 1004
Towada 021 1,0215 Toshiba 0140,1029,2056 DBX 1000 Jensen 1007
Transtec 0200 De Graaf 1046, 1049 JVC 1000, 1001, 1007,
Trident 0204 TVNCR Decca 1042, 1043, 1046 1011,1017,1036,
Tristar 0218 Aiwa 0237, 1066 Denon 1010 1043
Triumph 0204 Bush 0237, 1066 Dimensia 1009 Kaisui 1050
Uher 0211,0213 Daewoo 0155,0238, 1038, Dual 1043, 1046 Karcher 1046
Ultravox 0200,0205,0207, 1067 Dumont 1042, 1046, 1047, Kendo 1044
0214,0215 GE 0147, 1030 1049 Kenwood 1000,1001,1007,
United 0217 Goodmans 0240, 1069 Dynatech 1005 1011,1043
Universum 0127,0128,0129, Grundig 0236, 1062 Electrohome 1003 KLH 1006
0201,0206,0213, Hitachi 0156, 1039 E1ectrophonic 1003 Kodak 1003, 1004
0214,0215,0217 JVC 0153, 1036 Elta 1050 Korpe1 1050
Univox 0212 Magnavox 0150, 1033 Emerson 1003, 1004, 1005, Leyco 1050
Vestel 0210,0211,0213, Orion 0235,1065 1012,1013 LG 1003, 1042, 1045,
0214,0215,0217 Panasonic 0151, 1034 Etzuko 1050 1071
Vexa 0208,0217 Philips 0150,0232,0233, Ferguson 1043 Lifetec 1044, 1048
Victor 0213 1033, 1062, 1063 Fidelity 1042 Lloyd's 1005
VIDEOLOGIC 0200 Quasar 0152, 1035 Finlandia 1046, 1047, 1049 Loewe 1048
Videologique 0200,0207,0209, RCA 0149,1032 Finlux 1042, 1043, 1046, LoeweOpta 1045,1046
0218 Roadslar 0237, 1066 1047, 1049 Logik 1006,1050
Videosat 0214 Samsung 0144,0239, 1027, FIRST LINE 1044,1045, 1049, Luxor 1047
VideoSystem 0213 1068 1050 LXI 1003
Videotechnic 0200 Sharp 0145, 1028 Fisher 1001, 1047 M Electronic 1042
Vidtech 0060,0061 Sony 0234, 1064 Flint 1044 Magnasonic 1047
Viewsonic 0076,0077,0092, Sylvania 0148,1031 ForrnentilPhoenix Magnavox 1004, 1018, 1033
0099,0172,0173 Tatung 0237, 1066 1046 Magnin 1003, 1014
Visiola 0200,0207 Toshiba 0146,0237, 1029, Fuji 1004 Manesth 1050
Vision 0213 1066 Fujitsu 1042 Marantz 1000,1001,1004,
Vortec 0213,0217 Zenith 0154, 1037 Funai 1005, 1042 1046,1051
Voxson 0205,0210,0211, Galaxy 1042 Marta 1003
0213 VCR Garrard 1005 Matsui 1044,1045
Waltham 0207,0212 Admiral 1008, 1013 GBC 1050 Matsushita 1004
Wards 0057,0058,0060, Adventura 1005 GE 1002, 1004, 1009, Mediator 1046
0061,0063 Aiwa 1005, 1042, 1043, 1014, 1030 Medion 1044,1048
Watson 0213,0217,0218 1044,1066 GEC 1046 MEl 1004
Watt Radio 0200,0207,0212, Akai 1007, 1043 Geloso 1050
0215 Akiba 1050 General Technic 1044, 1048
Wega 0205 Akura 1043, 1050 Go Video 1014
vi
Memorex \001, 1002, 1003, Pathe Marconi 1043 Samsung 1002,1014,1021, Tatung 1007,1042, 1043,
1004, 1005, 1008, Penney 1010,1014 1027,1052, 1068, 1046, 1066
1013,1014,1042, Pentax 1010. 1049 1070 TCM 1044, 1048
1045, 1047 Perdio 1042 Sanky 1008 Teac 1005, 1007
Memphis 1050 Philco 1004,1051 Sansui 1007, lOll, 1013, Technics 1004, 1048
Metz 1048 Philips 1004, 1025, 1033, 1043 Teknika 1003, 1004, 1005
MGA 1014 1046, 1056, 1057, Sanyo 1001, 1002, 1014, Teleavia 1043
MGN Technology 1059, 1062, 1063 1047 Telefunken 1043
1002, 1014 Philips Magnavox SBR 1046 Tenosal 1050
Micromaxx 1044, 1048 1018 Schaub Lorenz 1042, 1043, 1047 Tensai 1042, 1045, 1050
Microstar 1044, 1048 Phonola 1046 Schneider 1042, 1044, 1045, Tevion 1044, 1048
Migros 1042 Pilot 1003 1046, 1050 Thomson 1043. 1058
Minolta 1010 Pioneer 1011,1046 Scott 1012 Thorn 1043,1047
Mitsubishi 1011, 1042. 1046 Prinz 1042 Sears 1001.1003,1004, TMK 1002,1014
Montgomery Ward Profex 1050 1010 Tokai 1045, 1050
1008 Profitronic 1014 SEG 1050 Tonsai 1050
Motorola 1004, 1008 Proline \042 SEI-Sinudyne 1046 Toshiba 1013,1024, 1029,
MTC 1002, 1014 Proscan 1009 Seleco 1043 1043, 1046, 1066,
Multitech 1002, 1005,1006, Prosonic 1044 Sentron 1050 1075
1042, 1046, 1050 Protec 1006 Sharp 1008. 1023, 1028, Totevision 1002. 1003, 1014
Murphy 1042 Pye 1046, 1056 1053,1073 Towada 1050
National 1048 Quarter 1001 Shintom 1006, 1047, 1050 Towika 1050
NEC 1000, 1001, 1007, Quartz 1001,1047 Shivaki 1045 Uher 1045
1011,1043,1051 Quasar 1004, 1035 Shogun 1002, 1014 Unitech 1002,1014
Neckerrnann 1043, 1046 Quelle 1042,1046,1047 Siemens 1045, 1047 Universum 1042, 1045, 1046
NEI 1046 Radio Shack 1003 Signature 2000 1008 Vector Research 1000
Nesco 1050 Radio Shack/Realistic Silva 1045 Video Concepts 1000
Nikko 1003 1001, 1002, 1003, Singer 1004,1006 Videon 1044,1048
Noblex 1002, 1014 1004, 1005, 1008 Sinudyne 1046 Videosonic 1002,1014
Nokia 1043, 1047 Radiola 1046 Sontee 1045 Wards 1002, 1003, 1004,
Nordmende 1043 Radix 1003 Sony 1016, 1019, 1055, 1005, 1006, 1008,
Oceanic 1042, 1043 Randex 1003 1060,1064, 1074 1010, 1014
Okano 1044 RCA 1002, 1004, 1009, STS 1004,1010 Weltblick 1045
Olympus 1004 1010, 1014, 1015, Sunkai 1044 White Westinghouse
Optimus 1003, 1008 1022, 1032 Sunstar 1042 1013
Orion 1012, 1013, 1044, Realistic 1001, 1002, 1003, Suntronic 1042 XR-looo 1004, 1005, 1006
1065 1004, 1005, 1008 Sunwood 1050 Yamaha 1000, 1001, 1007
Orson 1042 Rex 1043 Sylvania 1004,1005,1031, Yamishi 1050
Osaki 1042, 1045, 1050 RFI' 1046 1041 Yokan 1050
Otto Versand 1046 Roadstar 1045, 1050, 1066 Symphonic 1005 Yoko 1045,1050
Palladium 1043, 1045, 1050 Saba 1043 Taisho 1044 Zenith 10 13, 1026, 1037
Panasonic 1004, 1020, 1034, Saisho 1044,1050 Tandy 1001
1040, 1048, 1054, Salora 1047 Tashiko 1003, 1042
1072
_YAMAHA
·YAMAHA RX-V563/RX-V463
English - Correction
Setting the Parental Lock (page 57 for RX-Y563 or page 55 for RX-V463)
Incorrect Correct
4 Press ®!J./ V repeatedly to select "G)SIRIUS 4 Press ®!J. / V repeatedly to select "G)SIRIUS
SET" and then press ® ENTER. SET" and then press ® ENTER.
The following menu screen appears. "NEW PIN:OOOO" appears.
G)SIRIUS SET
-t PflRENmL LOCK
[0V[9J: ~lU~lBER
[EtHJ: EtHER 5 Enter the desired 4-digit code number by
using the numeric buttons (@).
.:-'(,)-:.
If a SiriusConnect tuner is not connected to this unit, "Not Press @RETURN to return the previous menu level
Available" appears. without setting the code number.
,I,
~ti>:.
If the Parental Lock code number is already set, "PIN:_" 6 Press ®ENTER to confirm the code number.
appears instead of "NEW PIN:OOOO". Refer to step 8 and "OK" appears and then the following menu screen
then proceed the operations. appears.
E)BLUETOOTH
,I, F) :'<t'l RflD 10 SET
~ti>:.
-t G)SIRIUS SET
Press @RETURN to return the previous menu level
without setting the code number. [Jo.J / [TJ : Up.···Dol,m
[EtHER J: Entet··
4 Appuyez plusieurs fois de suite sur ®/:,/ V 4 Appuyez plusieurs fois de suite sur ®/:,/ V
pour selectionner "G)SIRIUS SET", puis pour selectionner "G)SIRIUS SET", puis
appuyez sur ® ENTER. appuyez sur ® ENTER.
Le menu suivant apparait. "NEW PIN:OOOO" apparait.
appareil, "Not Available" s'affiche. Appuyez sur ®RETURN pour revenir au niveau precedent
du menu sans saisir Ie code.
YAMAHA CORPORATION
Printed in China c WP19980
[TI
_YAMAHA RX-V463
Correction
This unit is not equipped with AC outlets. Therefore, please ignore the following description on page 90.
• AC Outlets
[Australia model] I (100 W maximum)
[U.S.A., Canada and China models] 2 (Total 100 W maximum)
[Other models] 2 (Total 50 W maximum)
YAMAHA CORPORATION
Printed in China c WP09990
·YAMAHA RX-V463
The circled numbers and alphabets correspond to those in the Owner's Manual.
Les nombres et lettres dans un cercle correspondent aceux du mode d'emploi.
® ® © @ ® ® @@ CD
_-1---------------1-----1-----1--------1-------1--- --1---------------1-_
@YAMAHA
VOLUME
'"' J PRESET{TUNINGICH [~
SCENE
\~ ll~
<J PROGRAM [> -<I INPUT [>
-------VIDEDAUX---·--
VIDEO L 'AUDIO . . R PORTABlE
SPEA~EAS TONE CONTROL STRAtGHT DIRECT AUDIO SELECT
00
AIBIOFF
. . '·0······/·····
... ···
· .·.· · . · · . · · . · · · · · · ·
0 · · ·
.
EFFECT
K L M N o p Q
• Remote control/Boitier de telecommande
'0
~~"l1-==~~~1TV.VOL
(3
9 )--....;--{
YAMAHA CORPORATION
Printed in China c WN26190
Big Ten FootbalVOasketball
199-201 SEC FootbalVOasketball
lIM Exdusives 203 ~!: Big East FootbalVOasketball
........ :::.::'.:.... ~~.~~
MON ~ ~.11~ Artist Confidential" 62 ::!Ji.-,t'i AdultR&B Hits 241-242 ~. Big 12 FootbalVOasketball
~E -I;~~~ J:~~~lfitli~:~~g~n~s 64 GhaauE Old Skool R&B 231-236 ~ College Sports Play-by-Play
- " 1 Bob~n's
WED 'UIWIollII 65 Old Skool Hip-HoplRap XL
Theme Time Radio Hour
--
jiiii--ii.~ j~'; p~itys Bu-ri.d T;;'a~ure 66 New Uncut Hip-Hop XL 205-209 NHL Hod!eyPlay-by-Play
-~,(Iri"; --MartiStiiwr,; - 67 Urban Contemporary 237-239 NHL Hockey Play-by-Play
) J~ AI)1~ncan !Y'~y._
Smooth/ContemporaryJazz
'60s Pop Hits Modem Jazz
70s Pop Hits American Standards
CNN
CNN Headline News 132 ~rJ C-SPAN Radio
The Weather Channel
~VAmericana CNN en Espanol SP 244 ~ 9 News&lnfonnation
QuFJ~? News&lnfonnationFR
Bluegrass
Folk
ElectronicalTrance
Disco/Classic Dance .166 ~ Conservative Talk
.167 ~ Progressive Talk
168 ~ FOX News Talk
Love Songs 169 /llfwer African-American Talk
Lite Pop Hits 170 ~ Christian Talk
Modem Adult Hits E! Entertainment .171 TNcke,,'Channel
Movie Soundtracks Books &Drama
~ Show Tunes
International Hits
WF15740
YAMAHA Home Audio products are designed and manufactured to provide a high level of trouble-free performance. YAMAHA Electronics Corporation, USA, is
proud of the experienced craftsmanship that goes into each and every YAMAHA Home Audio product. YAMAHA sells its Home Audio products only through a network
of high quality, specially authorized dealers and is pleased to offer the following Limited Warranty, which applies only to products purchased from our authorized dealers.
YAMAHA Home Audio products are backed by a nationwide network of high quality YAMAHA Authorized Service Centers, providing prompt, courteous, and
professional service. We suggest that you read the Limited Warranty thoroughly, and invite you to contact your authorized YAMAHA dealer or the YAMAHA Electronics
Corporation, USA, Service Department if you have any questions.
• YAMAHA
Jr LIlMIlTlED WARRANTY ~
HOME AUDIO PRODUCTS
Type of Product Duration of Warranty
(beginning from first consumer purchase)
A/V and Stereo Receivers, Processor and Integrated Amplifiers, Separate Am-
plifiers and Preamplifiers, Tuners, CD Players and Changers, HDD Players and
Recorders, Powered Loudspeakers and Speaker Systems purchased individu-
ally, as a pair, or as part of an Integrated or Packaged system. .. 2 years
What we will pay for and what you must pay for:
YAMAHA will repair or replace units covered by this warranty, without charge to the consumer for labor or materials. Some repair parts may be
used or rebuilt replacements, that meet or exceed Yamaha specifications for new parts, in exchange for defective parts. YOU ARE RESPONSIBLE FOR
ANY INSTALLATION OR REMOVAL CHARGES AND FOR ANY INITIAL SHIPPING CHARGES, if the product(s) must be shipped for warranty
service. However, we will pay the rcturn shipping chargcs to any destination within the USA if the repairs are covered by the warranty.
Exclusion of Damages:
YAMAHA'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT OUR
OPTION. IF WE ELECT TO REPLACE THE PRODUCT, THE REPLACEMENT MAY BE A RECONDITIONED UNIT. YAMAHA SHALL NOT BE
LIABLE FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT
THE SITE OF USE, OR ANY OTHER DAMAGES WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Should you have any questions about service received or if you need assistance in locating an authorized YAMAHA Service Center, please contact:
.YAMAHA
SERVICE DEPARTMENT
YAMAHA Electronics Corporation, USA
6660 Orangethorpe Avenue, Buena Park, California 90620-1345
Telephone: (714) 522-9105 Internet URL: hltp://www.yamaha.com/yec/
Do not return any product to the above address; it is not a service location. YAMAHA products are backed by a nationwide network of high quality
YAMAHA authorized Service Centers, providing prompt, courteous and professional service. For referral to your nearest authorized YAMAHA
Preferred Customer Service Center or authorized YAMAHA Regional Service Center call 1-800-4 YAMAHA.
WM18180