G EK KO®

State-of-the-art phased-array flaw detector with TFM

SPECIFICATIONS
GENER AL I/O
10.4‘’ high contrast resistive screen 1 IPEX connector for phased-array (can be
L x W x H: 410mm x 284mm x 126mm 4 LEMO 00 connectors for UT-TOFD (4PR)
Resolution 1024x768 px upgraded to 2 with splitter)

Operating temperature range: Weight: 6kg (without battery) 3 encoder inputs 1 external trigger
from -10°C to 45°C | 14°F to 113°F 0,480g /battery
Remote control and data transfer through
Storage temperature range: 3 USB 2.0
Designed for IP66 Ethernet
-10°C to 60°C | 14°F to 140°F with battery
1 RJ 45 Ethernet connector 16 analog I/O
Operating time: 4h (hot swappable battery) Shock resistance according to MIL-STD-810G

PHASED-ARR AY
Maximum active aperture: 64 elements Linear scanning, sectorial scanning, compound scanning, CIVA Laws
Total number of channels : 64 Focusing modes: true depth, sound path, projection
Linear, matrix, DLA and DMA probes CIVA fueled phased-array calculator
Up to 6 probes | Up to 8 groups | Up to 2,048 delay-laws On-board focal law calculation on plate, cylinder, T & Y, nozzle

REAL-TIME TFM
Reconstruction channels: up to 64 elements Max number of points of the TFM image: up to 1Mpi (post-processing)
Max refresh rate: up to 80fps Sound paths: direct (L or S), indirect and converted modes
Real-time aAdaptive TFM (ATFM) module 4 resolution levels
All calibration wizards (including TCG) available A-Scan, B-Scan, C-Scan, D-Scan, Echodynamic, Top view, Side view, 3D view

PULSERS

Negative square pulse, width: 35ns to 1250ns Negative square pulse, width: 30ns to 1250ns
Phased array channels :1
HT voltage: from 12V to 100V (with 1V step) UT-TOFD channels : 2
HT voltage: from 12V to 200V (with 1V step)
Max. PRF: up to 20kHz Max. PRF: up to 20kHz

RECEIVERS
Input impedance: 50 Ω Input impedance: 50 Ω
Frequency range: 0.4 to 20MHz Frequency range: 0.6 to 25MHz
Phased array channels :1
Max. input signal: 1.2Vpp UT-TOFD channels : 2
Max. input signal: 1.4 Vpp

Standard: EN ISO 18563-1 for phased array channels. / 2 Standard: EN ISO 12668-1 for conventional channels.
Gain: up to 120dB (0.1dB step)
Gain: up to 120dB (0.1dB step)
Cross-talk between two channels < 50 dB

DIGITIZER ACQUISITION

Digitizing and real-time summation on 64 channels 16bits amplitude resolution Hardware acquisition gates (true-depth or Max. data flow 150 MB/s on a 128Gb SSD
soundpath) (extensible up to 1 To)
FIR filters Max. sampling frequency: 100 MHz
A-Scan/Peak data recording Data compression
Real-time averaging up to x32 Digitizing depth up to 16k samples FMC recording Inspection data file size: SSD limitation
Rectified, RF, envelope A-scan range or delay max 65k samples Acquisition trigger on time, event, encoder Data frame loss indication

WIZARDS ANALYSIS

CAD overlay and 3D view Scanner resolution calibration CaptureTM software with analysis and
Compatibility with CIVA analysis and EnlightTM
reporting tools – Free PC Viewer
Real-time phased array calculator Amplitude calibration (TCG, ACG, DAC, DGS)
A-Scan, B-Scan, C-Scan, D-Scan, Echodynamic, Part & weld overlay: plate, cylinder, T or Y
Base-time calibration for conventional UT & PA Probe design | Weld geometry design Top view, Side view, 3D view section, nozzle
Analysis gates Digital gain , measurement indicators
Wedge calibration (angle, height, velocity) Amplitude balancing, dead element check
TOFD Lateral wave linearization and removal Customizable inspection report
Part geometry with parametric shapes:
Specimen velocity calibration
plate, cylinder, T & Y, nozzle Csv data export Amplitude range: up to 800%
1

The information in this document is accurate as of its publication. Actual

products may differ from those presented herein.

©2018 Eddyfi Technologies. M2M, Capture, , Enlight, and their associated logos
are trademarks or registered trademarks of Eddyfi Technologies in the United
States and/or other countries. Eddyfi Technologies reserves the right to change
product offerings and specifications without notice. 2018-05-28

www.m2m-ndt.com contact-m2m@eddyfi.com