Harman Kardon AVR 132 230 Service Manual

AVR 132/230
SERVICE MANUAL
harman/kardon®
Power for the Digital Revolution®
29782_AVR132_ENG_sort 10/08/06 16:45 Side 35
Technical Specifications
Audio Section FM Tuner Section

Stereo Mode Frequency Range 87.5–108MHz
Continuous Average Power (FTC) Usable Sensitivity IHF 1.3 µV/13.2dBf
40 Watts per channel, 20Hz–20kHz, Signal-to-Noise Ratio Mono/Stereo: 70/65dB (DIN)
@ < 0.07% THD, both channels driven into 8 ohms Distortion Mono/Stereo: 0.15/0.3%
Stereo Separation 35dB @ 1kHz
Five-Channel Surround Modes Selectivity ±400kHz: 70dB
Power Per Individual Channel Image Rejection 80dB
Front L&R channels: IF Rejection 90dB
30 Watts per channel,
@ < 0.07% THD, 20Hz–20kHz into 8 ohms AM Tuner Section
Center channel: Frequency Range 522–1620kHz
30 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Signal-to-Noise Ratio 45dB
Usable Sensitivity Loop: 500µV
Surround channels:
Distortion 1kHz, 50% Mod: 0.8%
30 Watts per channel,
Selectivity ±10kHz: 30dB
@ < 0.07% THD, 20Hz–20kHz into 8 ohms
Input Sensitivity/Impedance
Video Section
Linear (High Level) 200mV/47kohms
Video Format PAL/NTSC
Signal-to-Noise Ratio (IHF-A) 95dB Input Level/Impedance 1Vp-p/75 ohms
Surround System Adjacent Channel Separation Output Level/Impedance 1Vp-p/75 ohms
Analog Decoding 40dB Video Frequency
(Pro Logic, etc.) Response 10Hz–8MHz (–3dB)
Dolby Digital (AC-3) 55dB
DTS 55dB General
Frequency Response Power Requirement AC 220-240V/50Hz
@ 1W (+0dB, –3dB) 10Hz–100kHz Power Consumption 72W idle, 580W maximum
(2 channels driven)
High Instantaneous
Current Capability (HCC) ±25 Amps Dimensions (Max)
Width 440mm
Transient Intermodulation Height 165mm
Distortion (TIM) Unmeasurable Depth 382mm
Rise Time 16 µsec Weight 9.6 kg
Slew Rate 40V/µsec
Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.
Harman Kardon is a registered trademark.
*Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the Double-D symbol are
trademarks of Dolby Laboratories, Inc.
Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc.
All rights reserved.
†"DTS" and "DTS Neo:6" are registered trademarks of DTS, Inc. "96/24"
is a trademark of DTS, Inc.
Logic 7 is a registered trademark of Lexicon, Inc.
TECHNICAL SPECIFICATIONS 35
SAFETY PRECAUTIONS
The following check should be performed for the continued

protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Measure leakage current to a known earth ground (water

pipe, conduit, etc.) by connecting a leakage current tester
between the earth ground and all exposed metal parts of the
appliance (input/output terminals, screwheads, metal
overlays, control shaft, etc.). Plug the AC line cord of the
appliance directly into a 120V AC 60Hz outlet and turn the
AC power switch on. Any current measured must not exceed
o.5mA.
Reading should
not be above
Leakage
0.5mA
Device current
under tester
test
Test all
exposed metal
surfaces
Also test with
plug reversed
(Using AC adapter Earth
plug as required) ground
AC Leakage Test
ANY MEASUREMENTS NOT WITHIN THE LIMITS

OUTLINED ABOVE ARE INDICATIVE OF A
POTENTIAL SHOCK HAZARD AND MUST BE
CORRECTED BEFORE RETURNING THE APPLIANCE
TO THE CUSTOMER.
29782_AVR132_ENG_sort 10/08/06 16:45 Side 5
Front Panel Controls
E D F 5 J I
DIGITAL LOGIC 7 VID 1 DVD

PRO LOGIC VID 2 CD
3 STEREO DSP VID 3 FMAM
5 CH. STEREO TAPE
SURR. OFF 6 CH
2 6 7 8 B G
1
C 9 A 3 4 L
Main Power Switch 7 Tuning E Remote Sensor Window

1 System Power Control 8 Tuner Band Selector F Main Information Display
2 Power Indicator 9 Preset Stations Selector G Digital Coax 3 Input
3 Headphone Jack A Input Source Selector H Video 3 input jacks
4 Digital Optical 3 Input B RDS Select Button I Volume Control
5 Speaker/Channel Input Indicator C Surround Mode Selector J Input Indicators
6 Surround Mode Group Selector D Surround Mode Indicators
Main Power Switch: Press this button to 1 System Power Control: When the Main 5 Speaker/Channel Input Indicators: These
apply power to the AVR. When the switch is Power Switch is “ON,” press this button to indicators are multipurpose, indicating either the
pressed in, the unit is placed in a Standby turn on the AVR; press it again to turn the unit speaker type selected for each channel or the
mode, as indicated by the orange LED 2. This off (to Standby). Note that the Power incoming data-signal configuration. The left, cen-
button MUST be pressed in to operate the unit. Indicator 2 will turn blue when the unit is on. ter, right, right surround and left surround speaker
To turn the unit off completely and prevent the indicators are composed of three boxes, while the
2 Power Indicator: This LED will be illumi-
use of the remote control, this switch should be subwoofer is a single box. The center box lights
nated in orange when the unit is in the Standby
pressed until it pops out from the front panel when a “Small” speaker is selected, and the two
mode to signal that the unit is ready to be
so that the word “OFF” may be read at the top outer boxes light when “Large” speakers are
turned on. When the unit is in operation, the
of the switch. selected. When none of the boxes are lit for the
indicator will turn blue.
center, surround or subwoofer channels, no
NOTE: This switch is normally left in the “ON”
3 Headphone Jack: This jack may be used to speaker has been selected for that position. (See
position.
listen to the AVR’s output through a pair of page 16 for more information on configuring
headphones. Be certain that the headphones speakers.) The letters inside each of the center
have a standard 6.3 mm stereo phone plug. boxes display active input channels. For standard
Note that the speakers will automatically be analog inputs, only the L and R will light, indicat-
turned off when the headphones are connected. ing a stereo input. When a digital source is play-
ing, the indicators will light to display the chan-
4 Digital Optical 3 Input: Connect the opti-
nels begin received at the digital input. When the
cal digital audio output of an audio or video prod-
letters flash, the digital input has been interrupt-
uct to this jack. When the Input is not in use, be
ed. (See page 20 for more information on the
certain to keep the plastic cap installed to avoid
Channel Indicators).
dust contamination that might degrade future
performance.
FRONT PANEL CONTROLS 5

29782_AVR132_ENG_sort 10/08/06 16:45 Side 6
Front Panel Controls
6 Surround Mode Group Selector: Press 9 Preset Stations Selector: Press this D Surround Mode Indicators: Indicator will
this button to select the top-level group of button to scroll up or down through the list of illuminate in front of the surround mode that is
surround modes. Each press of the button will stations that have been entered into the preset currently in use.
select a major mode grouping in the following memory. (See page 27 for more information on
E Remote Sensor Window: The sensor
order: tuner programming.)
behind this window receives infrared signals
Dolby Modes ➜ DTS Digital Modes ➜ DSP A Input Source Selector: Press this button from the remote control. Aim the remote at this
Modes ➜ Stereo Modes ➜ Logic 7 Modes to change the input by scrolling through the list area and do not block or cover it unless an
of input sources. external remote sensor is installed.
Once the button is pressed so that the name of
the desired surround mode group appears in the B RDS Select Button: Press this button to F Main Information Display: This display
Lower Display Line F, press the Surround display the various messages that are part of the delivers messages and status indications to help
Mode Selector C to cycle through the indi- RDS data system of the AVR’s tuner. (See page 28 you operate the receiver.
vidual modes available. For example, press this for more information on RDS).
G Digital Coax 3 Input: This jack is normally
button to select Dolby modes, and then press
C Surround Mode Selector: Press this but- used for connection to the output of portable
the Surround Mode Selector C to choose
ton to select from among the available surround digital audio devices, video game consoles or
from the various mode options.
mode options for the mode group selected. The other products that have a coax digital jack.
7 Tuning Selector: Press the left side of the specific modes will vary based on the number of
H Video 3 Input Jacks: These audio/video
button to tune lower frequency stations and the speakers available, the mode group and if the
jacks may be used for temporary connection to
right side of the button to tune higher frequency input source is digital or analog. For example,
video games or portable audio/video products
stations. When a station with a strong signal is press the Surround Mode Group Selector
such as camcorders and portable audio players.
reached, MANUAL TUNED or AUTO 6 to select a mode grouping such as Dolby or
TUNED will appear in the Main Information Logic 7, and then press this button to see the I Volume Control: Turn this knob clockwise
Display F (see page 27 for more information mode choices available. For more information on to increase the volume, counterclockwise to
on tuning stations). mode selection, see page 21. decrease the volume. If the AVR is muted,
adjusting volume control will automatically
8 Tuner Band Selector: Pressing this button
release the unit from the silenced condition.
will automatically switch the AVR to the Tuner
mode. Pressing it again will switch between the J Input indicators: Indicator will illuminate
AM and FM frequency bands, holding it pressed in front of the input that is currently being used
for some seconds will switch between stereo as the source for the AVR.
and mono receiving and between automatic and
manual tuning mode (See page 27 for more
information on the tuner).
6 FRONT PANEL CONTROLS

29782_AVR132_ENG_sort 10/08/06 16:45 Side 7
Rear Panel Connections
¢ d ‡
ﬂ ª ﬁ
a ∞ £ §
¶ °
b · B
™
¡
e
⁄ ‹ › ‹ ‚ c
0 Tape Inputs 9 Coaxial Digital Inputs I Video 1 Video Outputs

1 Tape Outputs A Subwoofer Output J Video 2 Audio Inputs
2 Video 1 Audio Inputs B Video Monitor Outputs K Video 2 Video Inputs
3 AM Antenna C Front/Center Speaker Outputs L Optical Digital Inputs
4 Video 1 Audio Outputs D Surround Speaker Outputs M Video 1 Video Inputs
5 DVD Audio Inputs E Component Video Outputs N 6-Channel Direct Inputs
6 FM Antenna F Video 1 Component Video Inputs
7 CD Inputs G AC Power Cord
8 Video 2 Component Video Inputs H DVD Video Inputs
0 Tape Inputs: Connect these jacks to the 4 Video 1 Audio Outputs: Connect these 8 Video 2 Component Video Inputs:
PLAY/OUT jacks of an audio recorder. jacks to the RECORD/INPUT audio jacks on Connect the Y/Pr/Pb component video outputs of
a VCR or any other Audio recorder. an HDTV Set-top convertor, satellite receiver, or
1 Tape Outputs: Connect these jacks to the
other video source device with component video
RECORD/INPUT jacks of an audio recorder. 5 DVD Audio Inputs: Connect these jacks to
outputs to these jacks.
the analog audio jacks on a DVD or other video
2 Video 1 Audio Inputs: Connect these jacks
source. 9 Coaxial Digital Inputs: Connect the coax
to the PLAY/OUT audio jacks on a VCR or other
digital output from a DVD player, HDTV receiver,
video source. 6 FM Antenna: Connect the supplied indoor or
LD player, MD player or CD player to these jacks.
an optional external FM antenna to this terminal.
3 AM Antenna: Connect the AM loop antenna The signal may be either a Dolby Digital signal,
supplied with the receiver to these terminals. If an 7 CD Inputs: Connect these jacks to the ana- DTS signal or a standard PCM digital source. Do
external AM antenna is used, make connections to log output of a compact disc player or CD not connect the RF digital output of an LD play-
the AM and GND terminals in accordance with changer. er to these jacks.
the instructions supplied with the antenna.
A Subwoofer Output: Connect this jack to
the line-level input of a powered subwoofer. If
an external subwoofer amplifier is used, connect
this jack to the subwoofer amplifier input.
REAR PANEL CONNECTIONS 7

29782_AVR132_ENG_sort 10/08/06 16:45 Side 8
Rear Panel Connections
B Video Monitor Outputs: Connect these F Video 1 Component Video Inputs: L Optical Digital Inputs: Connect the optical
jacks to the composite and/or S-Video input of a Connect the Y/Pr/Pb component video outputs of digital output from a DVD player, HDTV receiver,
TV monitor or video projector to view the output a DVD player to these jacks. LD player, MD player or CD player to these jacks.
of any video source selected by the receiver’s The signal may be either a Dolby Digital signal, a
Note: All component inputs/outputs can be
video switcher. DTS signal or a standard PCM digital source.
used for RGB signals too, in the same way as
C Front/Center Speaker Outputs: Connect described for the Y/Pr/Pb signals, then connected M Video 1 Video Inputs: Connect these jacks
these outputs to the matching + or – terminals to the jacks with the corresponding color. to the PLAY/OUT composite or S-Video jacks on
on your front/center speakers. When making RGB connection is not possible if the source out- a VCR or other video source.
speaker connections, always make certain to puts a separate sync signal (see page 13).
Note: Either the Video or S-Video output of any
maintain correct polarity by connecting the red
G AC Power Cord: Connect the AC plug to an S-Video source must be connected to the
(+) terminals on the AVR to the red (+) terminals
unswitched AC wall output. AVR, not both in parallel, otherwise the video
on the speaker and the black (–) terminals on
may be disturbed or its performance be
the AVR to the black (–) terminals on the speak- H DVD Video Inputs: Connect these jacks to
adversely effected.
ers. (See page 12 for more information on the composite or S-Video output jacks on a DVD
speaker polarity.) player or other video source. N 6-Channel Direct Inputs: These jacks are
used for connection to source devices such as
D Surround Speaker Outputs: Connect I Video 1 Video Outputs: Connect these
DVD-Audio or SACD players with discrete analog
these outputs to the matching + or – terminals jacks to the RECORD/INPUT composite or
outputs.
on your left and right surround speakers. When S-Video jack on a VCR.
making speaker connections always make cer-
J Video 2 Audio Inputs: Connect these jacks
tain to maintain correct polarity by connecting
to the PLAY/OUT audio jacks on a VCR or other
the red (+) terminals on the AVR to the red (+)
video source.
terminals on the speakers and the black (–) ter-
minals on the AVR to the black (–) terminals on K Video 2 Video Inputs: Connect these jacks
the speakers. See page 12 for more information to the PLAY/OUT composite or S-Video jacks on
on speaker polarity. a second VCR or other video source.
E Monitor Component Video Outputs:
Connect these outputs to the component video
inputs of a video projector or monitor. When a
source connected to one of the two
Component Video Inputs 8F is selected
the signal will be sent to these jacks.
8 REAR PANEL CONNECTIONS

29782_AVR132_ENG_sort 10/08/06 16:45 Side 22
Operation
Surround Mode Chart

MODE FEATURES DELAY TIME RANGE
DOLBY DIGITAL Available only with digital input sources encoded with Dolby Digital data. It provides Center: 0 ms – 5 ms
up to five separate main audio channels and a special dedicated Low Frequency Effects Initial Setting – 0 ms
channel. Surround: 0 ms – 15 ms
Initial Setting – 0 ms
DTS 5.1 When the speaker configuration is set for 5.1-channel operation, the DTS 5.1 mode is
available when DVD, audio-only music or laserdiscs encoded with DTS data are played.
DTS 5.1 provides up to five separate main audio channels and a special dedicated
low-frequency channel.
DDOLBY PRO LOGIC II Dolby Pro Logic II is the latest version of Dolby Laboratory’s benchmark surround technology
MOVIE that decodes full-range, discrete left, center right, right surround and left surround channels
MUSIC from matrix surround encoded programs and conventional stereo sources when
DOLBY PRO LOGIC an analog input or a digital input with PCM or Dolby Digital 2.0 recordings is in use. The
Dolby Pro Logic II Movie mode is optimized for movie soundtracks that are recorded with matrix
surround, by creating separate center, rear left and rear right signals. while the Pro Logic II Music
mode should be used with musical selections that are recorded with matrix surround or even with
normal stereo mode, creating separate rear left and rear right signals in any case.
The Pro Logic II mode creates compelling five-channel surround sound from
conventional stereo recordings.
Logic 7 Cinema Exclusive to Harman Kardon for AV receivers, Logic 7 is an advanced mode that extracts the
Logic 7 Music maximum surround information from either surround-encoded programs or conventional stereo
Logic 7 Enhance material. Depending on the number of speakers in use and the selection made in the SURROUND
SELECT menu, the “5.1” versions of Logic 7 modes are available when the 5.1 option is chosen,
while the “7.1” versions of Logic 7 produce a full sound field presentation, including back surround
speakers when the “6.1/7.1” option is chosen. The Logic 7 C (or Cinema) mode should be used
with any source that contains Dolby Surround or similar matrix encoding. Logic 7 C delivers
increased center-channel intelligibility, and more accurate placement of sounds with fades and pans
that are much smoother and more realistic than with former decoding techniques. The Logic 7 M or
Music mode should be used with analog or PCM stereo sources. Logic 7 M enhances the listening
experience by presenting a wider front soundstage and greater rear ambience. Both Logic 7 modes
also direct low-frequency information to the subwoofer (if installed and configured) to deliver
maximum bass impact. The Logic 7 E (or Enhance) mode is an extension of the Logic 7 modes that is
primarily used with musical programs and is available with the 5.1 surround mode option selected
only. Logic 7 E adds additional bass enhancement that circulates low frequencies in the 40Hz to 120Hz
range to the front and surround speakers to deliver a less localized soundstage that appears broader
and wider than when the subwoofer is the sole source of bass energy.
DTS 96/24 DTS 96/24 is a high-resolution format that uses a 96kHz sampling rate with 24 bits to produce extended
information that improves the harmonics of the source material.
The AVR is capable of automatically detecting and decoding DTS 96/24 materials and delivering them as
the artist intended.
DOLBY 3 STEREO Uses the information contained in a surround encoded or two channel stereo program to No surround channels
create center channel information. In addition, the information that is normally sent to the
rear channel surround speakers is carefully mixed in with the front left and front right
channels for increased realism. Use this mode when you have a center channel speaker
but no surround speakers.
THEATER The THEATER mode creates a sound field that resembles the acoustic feeling Delay time not adjustable
of a standard live performance theater, with stereo and even pure mono sources.
HALL 1 The two Hall modes create sound fields that resemble a small (HALL 1) or Delay time not adjustable
HALL 2 medium sized (HALL 2) concert hall, with stereo and even pure mono sources.
22 OPERATION
29782_AVR132_ENG_sort 10/08/06 16:45 Side 23
Operation
Surround Mode Chart

MODE FEATURES DELAY TIME RANGE
5-Channel Stereo This mode takes advantage of multiple speakers to place a stereo signal at both the front and No delay is available for
back of a room. Ideal for playing music in situations such as a party, it places the same signal this mode
at the front-left and surround-left, and at the front-right and surround-right speakers. The center
channel is fed a summed mono mix of the in-phase material of the left and right channels.
Surround Off (Stereo) These modes turn off all surround processing and present the pure left- and right-channel No surround channels
Surround Off (Bypass) presentation of two-channel stereo programs. The Surround Off (Bypass) mode may only be
DSP Surround Off used with analog source inputs, as it preserves the analog format of the audio signal for its
entire path of travel through the receiver to the speaker and subwoofer outputs, bypassing
all digital processing. Digital bass management is not available in Surround Off mode. The
DSP Surround Off mode can be used with either an analog or digital input, as the signal
undergoes digital bass management to optimize the distribution of the low frequencies
between the main speakers and a subwoofer.
Dolby Virtual Speaker Dolby Virtual Speaker technology uses a next-generation advanced algorithm to reproduce the No surround channels
Reference dynamics and surround sound effects of a precisely placed 5.1-channel speaker system using only
Wide front left and right speakers. In the Reference Mode, the apparent width of the sound across
the front image is defined by the distance between the two speakers. The Wide Mode
provides a wider, more spacious front image when the two speakers areclose together.
Dolby Headphone Dolby Headphone enables ordinary stereo headphones to portray the sound of a five-speaker No surround channels
DH surround-playback system.
OPERATION 23
AVR132/230
1. Instruction manual ass'y - Accessories 2. Package Drawing
1 2 3 4 1 ACCESSORY-1
POLY BAG AM LOOP ANTENNA ASS'Y BATTERY ASS'Y FM 1 POLE ANT
5 6 7 8 2 SNOW PAD (L)

3 SNOW PAD (R)
REMOCON
IMAGE BROCHURES TRANSMITTER ASS'Y STAPLE
COVER ASS'Y
4 SET
9 10 11 12
5 BOX ,OUT CARTON
POLY BAG BOOKLET,INFORMATION MANUAL INSTRUCTION MANUAL SETUP CODE
ACCESSORY-1 13
NO DESCRIPTION PARTS NO. Q,ty
1 POLY BAG CPB1061Y 1
2 AM LOOP ANTENNA ASS'Y CSA1A027Z 1 6 ACCESSORY-2

3 BATTERY CABR03P3 3 STAPLE
4 FM 1 POL ANT(UL) CSA1A018Z 1
5 COVER ASS'Y CGRAVR130/230ZA 1 ACCESSORY-2

NO DESCRIPTION PARTS NO. Q,ty
1 COVER A CGR1A331M7H43 1 NO DESCRIPTION PARTS NO. Q,ty
1 ACCESSORY-1 CQXAVR132/230 1
2 COVER B CGR1A332M7H43 1 9 POLY BAG CPB1061Y 1
SHEET,FRONT COVER
2 SNOW,PAD(L) CPS4A564 1
3 CQE1A220Z 1 10 BOOKLET,INFORMATION CQE1A180Z 1
PAD , COVER
3 SNOW,PAD(R) CPS4A565 1
4 CPS1A676 1 11 MANUAL,INSTRUCTION CQX1A1154X 1
4 SET AVR132/230SET 1
5 BAG , POLY CPB1A176Z 1 12 MANUAL ,SETUP GUIDE CQX1A1138Y 1
HQE1A273Z 5 BOX,OUT CARTON CPG1A820T 1

6 IMAGE BROCHURES 1 13 STAPLE CPL0905 3
REMOCON ASS'Y CARTAVR132/230 1 6 ACCESSORY-2 CQXAVR132/230 1
7
8 STAPLE CPL0905 3
AVR132/230 EXPLODE VIEW 35
33 34
44 S9
S13
40-3 S8
36
40-4 40-1
S16
41
S1
S15
40-5 39-1
32
S5
30
S16
S6 x2
S17
40-2 S4
29 S10
38-2
S4
S4 38-1 42
39-2
S5 S4
S5
S14
43
40-2
S5
28 S4
S5
22
21 27
NO DESCRIPTION PARTS NO. Q,ty Weright
1 ORNAMENT,VOLUME CGU1A318Z 1
20 2 CAP,VOLUME CGX1A338MBC63 1
26 3 HOLDER,VOLUME CMH1A214 1
S10 4 INDICATOR,VOLUME CGL1A222 1
S7 5 WINDOW ASS'Y CGUAVR132/230 1
25 1 WINDOW,FIP CGU2A399Z 1
2 BADGE,MODEL CGB1A173Z 1
6 SHEET,VOLUME CMZ2A090 1
7 FILTER,FIP CMZ1A088 1
8 BDAGE,HARMAN/KARDON KGB1A158Z 1
9 PANEL,FRONT CGW1A427RDZH43 1
15 S2 10 BRACKET,SIDE CMD2A443 2
11 KNOB,FUNCTION CBT1A1028MBYG27 1
13 12 SHEET,REFLECTION CMZ1A120 1
14-1 37-8 13 KNOB,POWER CBT1A1026MMZG27 1
14 37-1 14 INDICATOR,POWER CGL1A258Z 1
S2 S2 15 KNOB,MOMS CBC1A158MBZG27 1
37-3 16 BRACKET,PCB CMK2A010 1
24 17 PLATE,SHIELD CMC1A302 1
18
23 19 HOLDER,LED CMH1A215 1
10 37-4 S2
12 20 BRACKET,FIP CMD1A209 3
21 CABINET,TOP CKC4B145S46Z 1
S4 22 CHASSIS,BOTTOM CUA2A229 1
37-2
9 S2 23 RUBBER,CUSHION
FOOT
CHG1A329
CKL2A069H43
4
4
24
25 SUPPORT,CUSHION CHG1A104Z 1
26 HEAT SINK CMY1A273 1
27 BRACKET,PCB CMD1A417 2
8 37-6 24 28 HOLDER,PCB CHE1A170 2
S14 23 29 BRACKET,TRANS CMD1A487 1
7 30 BRACKET,PCB(H/T) CMD1A398 2
31 BRACKET,PCB CMD1A570 1
S4 32 BRACKET,PCB CMD1A387 2
S2 33 PANEL,REAR CKF8A319Z 1
34 BUSHING,AC CORD KHR1A028 1
S2 35 CORD,POWER CJA523FBYA 1
36 TRANS,POWER CLT5U026ZE 1
37 FRONT PAB ASS'Y COP11910H 1
37-5 37-9 37-1 FIP PCB 1
37-2 KEY PCB 1
19 37-3 POWER LED PCB 1
37-4 MOMS PCB 1
37-5 PHONE PCB 1
16 37-6 VOLUME PCB 1
37-7 RS232 PCB 1
NO DESCRIPTION PARTS NO. Q,ty 37-8 GUIDE PCB(CARD CABLE) 1
S1 SCREW CTB3+8JFC 13
17 S2 SCREW CTB3+10GR 31 38 MAIN PCB ASS'Y COP11911H
38-1 MAIN PCB
1
1
S3 SCREW CTWS3+10GR 1
11 S4 SCREW CTW3+8JR 9 38-2 GUIDE PCB(CARD CABLE) 1
S2 S5 SCREW CTB3+8JR 10
39 INPUT PCB ASS'Y COP11931H 1
S6 SCREW CTW3+12JR 3
39-1 INPUT PCB 1
S7 SCREW CTB4+6FFC 6 39-2 RDS PCB 1
10 S8 SCREW CTB3+10GFZR 22 40 POWER PCB ASS'Y COP11916H 1
S9 SCREW,TRANS CHD1A023R 4 40-1 DIGITAL IN PCB 1
S1 S10 SCREW CTB3+6JR 19 40-2 REGULATOR PCB(A) 5
S11 SCREW CTB3+16GFZR 2 40-3 TRANS PCB 1
S12 40-4 TRANS PCB 1
S1 40-5 REGULATOR PCB(B) 1
S13 SCREW CTB3+8JFZR 3
41 VIDEO PCB ASS'Y COP11930H 1
S14 SCREW,SPECIAL CHD1A012R 16
42 TUNER MODULE CNVM9014MS171L 1
S15 SCREW,SPECIAL CHD1A012ZR 2
43 CUSHION CHG1A160Z 1
6 S16 SCREW,SPECIAL CHD3A012R 6 44 BADGE,HARMAN/KARDON CGB1A152Z 1
5 S17 SCREW,SPECIAL CHD4A012R 5
4
3
1 2
DISASSEMBLY AVR132/230
1. Removing the Top Cabinet 3. Removing the Rear Panel

Remove the Screws 1 ~ 13 Remove the Screws 1 ~ 18
10
9
11
7 6 5 4 3 2 1 11 12 13
6
4 8
7
8
5 12 9
10
13
3
14 15 16 17 18
1
4. Removing the Main PCB

Remove the Screws 1 ~7
2. Removing the Front Panel

9 Remove the Screws 1 ~ 9
1
8
5
2
6
3
7
4
7
6
5
1
4
2
3
harman/kardon AVR132/230
FRONT PCB (CUP11910)

Ref# Component Description 1 Description 2 Qty
CUP11910-1 PCB , FRONT(FIP) PCB 1
CMC3A111 PLATE , EARTH PLATE 1

C714 HCBS1H151KBT CAP , CERAMIC 150UF 50V K 1
C716 CCEA1AH331T CAP , ELECT 330UF 10V 1
C723 HCBS1H104ZFT CAP , CERAMIC 0.1UF 50V Z 1
C731 CCEA1HH100T CAP , ELECT 10UF 50V 1
C735 CCEA1CKS100T CAP , ELECT 10UF 16V 1
C794 HCBS1C222MXT CAP , CERAMIC 2200PF 16V 1
C795 HCBS1H102KBT CAP , CERAMIC 1000PF 50V K 1
C901 HCBS1H390JT CAP , CERAMIC 39PF 50V Z 1
C903 CCEA1HKS2R2T CAP , ELECT 2.2UF 50V SMALL SIZE 1
C905 CCEA1HKS2R2T CAP , ELECT 2.2UF 50V SMALL SIZE 1

WAFER, CARD CABLE
CN72 CJP17GA193ZY WAFER 1
(SMD)
CN89 CJP04GB46ZY WAFER WAFER 1
D730 CVD1SS133MT DIODE 1SS133 1
D778 HVD1N5819T DIODE , SCHOTTKY 1N5819 1
L702 HLQ02C100KT COIL , AXAIL COIL 1
FIP1 HFLHCA18ML03 F.I.P F.I.P 1
IC73 HRVNJL34H380A SENSOR , REMOTE SENSOR 1
IC75 HVI74ACT04MTR I.C , HEX FAIRCHILD 1
Q701 HVTKRC107MT T.R KRC107M 1
Q722 HVTKRA107MT T.R KRA107M 1
Q739 HVTKTA1271YT T.R KTA1271Y 1
Harman Consumer Group International

FRONT PCB (CUP11910)

R701 CRD20TJ103T RES , CARBON 10K OHM 1/5W J 1
R704 CRD20TJ100T RES , CARBON 10 OHM 1/5W J 1
R718 CRD20TJ222T RES , CARBON 2.2K OHM 1/5W J 1
BN81 CWB2C908200BM WIRE ASS'Y WIRE 1
BN84 CWB2B905080EN WIRE ASS'Y WIRE 1
BN85 CWB2B902100EW WIRE ASS'Y ( ANGLE ) WIRE 1
FRONT STAND BY PCB (CUP11910-3)
PCB , FRONT STAND
CUP11910-3 PCB 1
BY
S701 HST1A020ZT SW , TACT 1A020 1
L.E.D , 2 COLOR (ORG ,
D723 CVD50BOBBWGA L.E.D 1
BLUE)
L.E.D , 2 COLOR (ORG ,
D727 CVD50BOBBWGA L.E.D 1
BLUE)

FRONT POWER (CUP11910-4)

PCB , FRONT POWER
CUP11910-4 PCB 1
SW
CN86 CJP02GA89ZM WAFER WAFER 1
SW1 CSH1A008ZV SW , PUSH (MOMS) MOMS SWITCH 1
FRONT PANEL KEY PCB (CUP11910-2)
Ref# Component Description Description 2 Qty
PCB , FRONT PANEL
CUP11910-2 PCB 1
KEY
R753 CRD20TF1001T RES , CARBON 1K /1/5W /F 1
R754 CRD20TF1501T RES , CARBON 1.5K /1/5W /F 1
R756 CRD20TF2701T RES , CARBON 2.7K /1/5W/F 1
R757 CRD20TF3301T RES ,CARBON 3.3K /1/5W/F 1
R758 CRD20TF5601T RES ,CARBON(5.6K/F) 5.6K/1/5W/F 1
R763 CRD20TF3301T RES ,CARBON 3.3K /1/5W/F 1
R764 CRD20TF5601T RES ,CARBON(5.6K/F) 5.6K/1/5W/F 1
R765 CRD20TF7501T RES , CARBON (7.5K/F) 7.5K/1/5W/F 1

VR JACK PCB (CUP11910-6)

CUP11910-6 PCB , VR JACK PCB 1
BN10 CWZAVR230BN10 WIRE ASS'Y (SHIELD) WIRE 1
D701 CVD52CSBBCEAB2 BLUE L.E.D L.E.D 1
JK85 CJJ9M003Z JACK , S-VIDEO S-VIDEO JACK 1
JK86 CJJ4S023Y JACK , BOARD BOARD 1
JW84 CWE8202110RV WIRE ASS'Y WIRE 1
VR74 CSR2A037Z ENCODER ENCODER 1

PHONE JACK PCB (CUP11910-5)

CUP11910-5 PCB , PHONE JACK PCB 1
C808 HCBS1H181KBT CAP , CERAMIC 180PF 50V Z 1
C817 HCBS1H100JCT CAP , CERAMIC 10PF 50V 1
C850 HCBS1H471KBT CAP , CERAMIC 470PF 50V 1
C866 CCEA1HKS100T CAP , ELECT 10UF 50V 1
C867 CCEA1HKS100T CAP , ELECT 10UF 50V 1
C868 CCEA1EKS470T CAP , ELECT 47UF 25V 1
C869 CCEA1EKS470T CAP , ELECT 47UF 25V 1
C872 CCEA1CH331T CAP , ELECT 330UF 16V 1
CN85 CJP02GA19ZY WAFER, 2PIN WAFER 1
IC76 HVI74HCU04AFNG I.C , INVERTER TOSHIBA 1
IC86 HVINJM4556AL I.C , HEADPHONE JRC 1
JK81 CJJ4M043Y JACK,BOARD BOARD 1
MODULE ,
JK82 HJSTORX177L OPTICAL JACK 1
OPTICAL(RX)
JACK ,
JK83 CJJ2E026Z HEADPHONE(SILVER HDEAPHONE JACK 1
PLATE)
Q734 HVTKTC2874BT T.R , MUTE KTC2874B 1

PHONE JACK PCB (CUP11910-5)

MAIN PCB (CUP11911Z)
CUP11911Z PCB , MAIN PCB 1
CTW3+8JR SCREW 1
C506 CCKT1H331KB CAP , CERAMIC 330PF 50V 1


C601 CCCT1H120JC CAP , CERAMIC 12PF 50V 1
C900 HCQI1H473JZT CAP , MYLAR 0.047UF 50V 1
C905 CCFT1H223ZF CAP, CERAMIC 0.022UP 50V 1
CAP ,
C913 CCFT1H104ZF 0.1UF 50V ZF 1
SEMICONDUCTOR
C914 HCQI1H473JZT CAP , MYLAR 0.047UF 50V J 1
CAP ,
SEMICONDUCTOR
C939 CCEA1HH4R7T CAP , ELECT 4.7UF 50V 1
CAP ,
SEMICONDUCTOR


C972 HCQI1H562JZT CAP , MYLAR 5600PF 50V 1
C991 CCEA1HH1R0T CAP , ELECT 1UF 50V 1
D901 CVD1N4003SRT RECT , DIODE 1N4003 1
D961 CVD1N4003ST RECT , DIODE 1N4003 1
D979 HVDMTZJ6.2BT DIODE , ZENER MTZJ6.2B 1
ET90 HJT1A025 PALTE , EARTH MET37-0002 1
ET91 HJT1A025 PALTE , EARTH MET37-0002 1
F901 KJCFC5S HOLDER , FUSE FUSE 1


Q501 HVTKTA1268GRT T.R KTA1268GR 1
Q511 HVTKTC3200GRT T.R KTC3200GR 1
Q541 HVTKTC3198YT T.R KTC3198Y 1
Q681 HVTKSC2785YT T.R KSC2785Y 1


Q961 HVTKTA1024YT T.R KTA1024YT 1




R631 CRD25FJ180T RES , CARBON 18 OHM 1/4W 1
R646 CRD25FJ3R3T RES , CARBON 3.3 OHM 1/4W J 1
R666 CRD25TJ470T RES , CARBON 47 OHM 1/4W 1


R706 C3A206 WIRE , COPPER SN95/PB5 , 0.6 1
R901 CRD25TJ393T RES , CARBON 39K OHM 1/4W 1


R910 CRD20TJ105T RES , CARBON 1M OHM 1/5W J 1
R963 CRD20TJ105T RES , CARBON 1M OHM 1/5W J 1
CMYAVR144 HEAR SINK ASS'Y ASS'Y 1
CHD1A012R SCREW , SPECIAL SCREW 1
CHD3A012R SCREW , SPECIAL SCREW 1
CMD1A398 BRACKET , PCB BRACKET 1
CMD1A417 BRACKET , PCB BRACKET 1
CMY1A273 HEAT SINK HEAT SINK 1


CTB3+8JR SCREW SCREW 1
TR , POWER
Q652 HVT2SB1559P-OKM 2SB1559 1
(DARLINGTON TYPE)
TR , POWER
(DARLINGTON TYPE)
TR , POWER
(DARLINGTON TYPE)
TR , POWER
(DARLINGTON TYPE)
TR , POWER
Q657 HVT2SD2389P-OKM 2SD2389 1
(DARLINGTON TYPE)
TR , POWER
(DARLINGTON TYPE)
TR , POWER
(DARLINGTON TYPE)
TR , POWER
(DARLINGTON TYPE)
TR , POWER
(DARLINGTON TYPE)
TR , POWER
(DARLINGTON TYPE)
BN19 CWB3FE03250UP WIRE ASS'Y WIRE 1
BN20 CWB3FC04280UP WIRE ASS'Y WIRE 1
BN82 CWB1C902050EN WIRE ASS'Y WIRE 1
BN90 CWB4F232550PU WIRE ASS'Y WIRE 1
BN98 HJP08GA130ZK WAFER WAFER 1
CN11 CJP13GA117ZY WAFER , CARD CABLE WAFER 1

WAFER, STRAIGHT,
2PIN
WAFER, STRAIGHT,
2PIN
WAFER, STRAIGHT,
2PIN


WAFER, STRAIGHT,
2PIN
WAFER, STRAIGHT,
2PIN
CN91 CJP02GA89ZY WAFER WAFER 1
CN92 KJP02KA060ZY WAFER WAFER 1
C631 CCEA1JH101E CAP , ELECT 100UF 63V 1
C902 CCET50VKL4472NK CAP , ELECT 4700UF/50V 1
CAP ,
C904 KCKDKS472ME 0.0047UF/2.5KV 1
CERAMIC(X1/Y2/SC)
C906 CCEA1EH102E CAP , ELECT 1000UF 25V 1
ET01 CMD1A387 BRACKET , PCB BRACKET 1
IC94 HVIMC7805C I.C, REGULATOR KA7805-ABTU 1
IC97 HVIS-80842CNY-X I.C RESET S-80842CNY-X 1
JK90 CJJ4M040Z JACK , BOARD (SW) JACK 1
JK91 CJJ5R006Z TERMINAL , SPEAKER SPEAKER TERMINAL 1
JK92 CJJ5P020Z TERMINAL , SPEAKER SPEAKER TERMINAL 1

JW90 CWE8212120VV WIRE , RED WIRE 1
JW91 CWE8212180VV WIRE ASS'Y WIRE 1
JW92 CWEE212080VV WIRE ASS'Y WIRE 1
JW96 CWE8212180VV WIRE ASS'Y WIRE 1
L501 CLEY0R5KAK COIL , SPEAKER 0.5UH K 1
Q858 HVT2SA1360O T.R 2SA1360O 1
Q871 HVT2SA1360O T.R 2SA1360O 1


Q872 HVT2SA1360O T.R 2SA1360O 1
Q874 HVT2SA1360O T.R 2SA1360O 1
Q875 HVT2SA1360O T.R 2SA1360O 1
Q881 HVT2SC3423O T.R 2SC3423O 1
Q882 HVT2SC3423O T.R 2SC3423O 1
Q883 HVT2SC3423O T.R 2SC3423O 1
Q884 HVT2SC3423O T.R 2SC3423O 1
Q885 HVT2SC3423O T.R 2SC3423O 1
RY94 HSL1A008ZE RELAY SDT-S-112DMR 1
R656 CRF5EKR27HX2K RES , CEMENT 0.27ohm X 2 1
RES , METAL OXIDE
R905 CRG1ANJ100H 10 OHM 1W J 1
FILM
RES , METAL OXIDE
FILM
RES , METAL OXIDE
FILM
RES , METAL OXIDE
FILM
RES , METAL OXIDE
FILM
RES , METAL OXIDE
FILM
THERMAL SENSOR ,
TH91 KRTP42T7D330B P42T7D330BW20 1
POSISTOR
T902 CLT5J033YE TRANS , SUB 1
POWER TRANS PCB (CUP11916-3,4)
CUP11916-3,4 PCB , POWER TRANS PCB 1
C104 HCBS1H103ZFT CAP , CERAMIC 0.01UF 50V 1
CAP ,
SEMICONDUCTOR


CAP ,
SEMICONDUCTOR
C119 CCEA1JH470TS CAP , ELECT 63V/47UF/105'C 1
C120 CCEA1JH470TS CAP , ELECT 63V/47UF/105'C 1
C125 CCFT1H473ZF CAP, CERAMIC 0.047UF 50V ZF 1
CON WAFER YMW025-
05R
CN20 CJP04GA90ZM WAFER WAFER 1
WAFER, STRAIGHT,
8PIN
D101 HVDMTZJ15BT DIODE , ZENER 15V 1/2W 1


D991 HVDKBU804F DIODE , BRIDGE KBU804F 1
D992 HVDKBU804F DIODE , BRIDGE KBU804F 1
Q911 HVTKTA1267YT T.R KTA1267Y 1
R104 KRQ1AJR47H RES , FUSE 0.47 OHM 1W J 1
R105 KRQ1AJR47H RES , FUSE 0.47 OHM 1W J 1
R106 CRQ1AJR33H RES , FUSE 0.33 OHM 1W J 1
R108 CRD20TJ4R7T RES , CARBON 4.7 OHM 1/5W J 1
R110 CRD20TJ4R7T RES , CARBON 4.7 OHM 1/5W J 1

DIGITAL IN/OUT PCB (CUP11916-1)

CUP11916-1 PCB , DIGITAL IN/OUT PCB 1
BN17 KJP12GB143ZP DIP SOCKET SOCKET 1
CAP ,
SEMICONDUCTOR
MODULE ,
OPTICAL(RX)
MODULE ,
OPTICAL(RX)
JK78 CJJ4S022Z JACK , BOARD JACK 1
JK79 CJJ4N068Z JACK , BOARD JACK 1
BIAS TR PCB (CUP11916-2)
CUP11916-2 PCB , BIAS TR PCB 1
Q851 HVTKTD600KGR T.R , BIAS KTD600KGR 1

BIAS TR PCB (CUP11916-2)

RES , SEMI FIXED(220
VR81 HVN1RA221B01T RH0615C100221 1
OHM)
VR82 HVN1RA221B01T RH0615C100221 1
OHM)
VR83 HVN1RA221B01T RH0615C100221 1
OHM)
VR84 HVN1RA221B01T RH0615C100221 1
OHM)
VR85 HVN1RA221B01T RH0615C100221 1
OHM)
REGULATOR PCB (CUP11916-5,6)
CUP11916-5,6 PCB , REGULATOR PCB 1
C939 CCEA1EH101T CAP , ELECT 100UF 25V 1
WAFER, STRAIGHT,
2PIN
WAFER, STRAIGHT,
3PIN

REGULATOR PCB (CUP11916-5,6)

CON WAFER YMW025-
09R
CN98 HJP08GB131ZK WAFER WAFER 1
WAFER, STRAIGHT,
8PIN
C912 CCEA0JKR3222E CAP , ELECT 2200UF 6.3V 1
C929 CCEA1VH102E CAP , ELECT 1000UF 35V 1
C930 CCEA1VH102E CAP , ELECT 1000UF 35V 1
C941 CCEA1CH682E CAP , ELECT 6800UF 16V 1
IC89 HVIL7805CP I.C, REGULATOR ST 1
IC95 HVINJM7809FA IC , REGULATOR JRC 1
INPUT PCB (CUP11931-1)
CUP11931-1 PCB , INPUT PCB 1
C201 CCUS1H221JA CAP , CHIP 220PF 1


C260 CCUS1H104KC CAP , CHIP 0.1UF 1
C269 CCUS1A105KC CAP , CHIP 1UF 1
C309 CCUS1H332KC CAP , CHIP 3300PF 1


CHIP, CAP
C701 CCUS1H150JA 15PF 1
15PF/50V/1608
CHIP, CAP
15PF/50V/1608


CHIP, CAP
18PF/50V/1608
CHIP, CAP
18PF/50V/1608


D201 CVD1SS355T CHIP , DIODE 1SS355T 1
IC20 CVINJW1197FC2 IC , SW(WITH VOLUME) JRC 1
IC21 HVINJM2068MDTE1 I.C , OP AMP JRC 1
IC73 HVIAK4589VQ-T I.C , CODEC + DIR ASAHI KASEI 1
IC75 CVICS49510-CQ I.C , DSP CIRRUS LOGIC 1
I.C, 4M FLASH
IC76 HVIM29W800DT70N ST 1
MEMORY
I.C , CHIP REGULATOR
IC78 HVINJM2391DL133 JRC 1
(+3.3V)
IC79 HVILM1117S-1V8 I.C , REGULATOR (1.8V) ETC 1
IC88 HVILM1117S-3V3 I.C , REGULATOR (3.3V) ETC 1

IC89 CVIM24C32WMN6TP I.C , EEPROM (32 Kbit) ST 1
IC90 CVIT5CC1 I.C , FLASH U-COM TOSHIBA 1
IC91 HVI74ACT04MTR I.C , HEX TOSHIBA 1
L701 HLZ9Z014Z CHIP , BEAD HU-1H4516-600JT 1
BEAD CHIP 60(1608
L704 HLZ9R005Z HH-1M1608-600 1
SIZE)


BEAD CHIP 60(1608
L705 HLZ9R005Z HH-1M1608-600 1
SIZE)
Q729 HVTKRC107S TR , CHIP KRC107S 1
RN61 CRJ104DJ103T RES, ARRAY, 10K (1608) 10K OHM/1608*4 1
RES, ARRAY, 100R

RN64 CRJ104DJ101T 100 OHM/1608*4 1
(1608)
RES, ARRAY, 100R
RN65 CRJ104DJ101T 100 OHM/1608*4 1
(1608)
RES, ARRAY, 100R
RN66 CRJ104DJ101T 100 OHM/1608*4 1
(1608)
RN74 CRJ104DJ330T RES , 4ARRAY (1608*4) 33 OHM/1608*4 1



RES, ARRAY, 100R
RN92 CRJ104DJ101T 100 OHM/1608*4 1
(1608)
R201 CRJ10DJ101T RES , CHIP 100 OHM 1
R224 CRJ10DJ272T RES , CHIP 2.7K OHM 1
R227 CRJ10DJ474T RES , CHIP 470K OHM 1


R253 CRJ10DJ4R7T RES , CHIP 4.7 OHM 1


R318 CRJ10DF3920T RES. CHIP (392R 1%) 392 OHM 1




R739 CRJ10DJ1R0T RES , CHIP 1 OHM 1
R760 CRJ10DJ105T RES , CHIP 1M OHM 1


CRYSTAL ,
X702 HOX27000E180S 27MHZ 1
CHIP(27MHZ,SMD)


C764 CCEA0JH102T CAP , ELECT 1000UF 6.3V 1
IC87 HVIRE5VT28CATZ IC , RESET RICOH 1
J101 C3A206 WIRE , COPPER SN95/PB5 , 0.6 0.018
J102 C3A206 WIRE , COPPER SN95/PB5 , 0.6 0.018



CN17 KJP12GB142ZP PIN HEADER WAFER 1
WAFER, STRAIGHT,
5PIN
CON WAFER YMW025-
05R
WAFER, STRAIGHT,
6PIN
C732 CCEA0JKR3222E CAP , ELECT 2200UF 6.3V 1
IC36 HVIL7808CP I.C , REGULATOR (+8V) ST 1
IC37 HVINJM7908FA I.C REGULATOR JRC 1
JK11 CJJ4R019W TERMINAL , IN/OUT TERMINAL JACK 1
JK12 CJJ4P014W JACK , IN/OUT TERMINAL JACK 1
JK13 CJJ4R019W TERMINAL , IN/OUT TERMINAL JACK 1
JK14 CJJ4P043W JACK IN/OUT JACK 1
X701 HOX24576E150TF CRYSTAL 24.576MHZ 1
RDS PCB (CUP11931-2)
CUP11931-2 PCB , RDS PCB 1

RDS PCB (CUP11931-2)

C767 HCEC1CRV2100T CAP , ELEC (SMD) 10UF / 16V 1
C774 HCEC1CRV2101T CAP , ELEC (SMD) 100UF / 16V 1
WAFER, STRAIGHT,
5PIN
X703 HOX04332E200C CRYSTAL 4.3321MHz 1
IC74 HVILC72723M IC , PLL (RDS) 1
VIDEO PCB (CUP11930)
CUP11930Z PCB , VIDEO PCB 1
C401 HCBS1H101KBT CAP , CERAMIC 100PF 1
C461 HCBS1H223ZFT CAP , CERAMIC 0.022UF 1


C601 HCBS1H220JCT CAP , CERAMIC 22PF 1
C672 HCBS1H104ZFT CAP , CERAMIC 22PF 1
R605 CRD20TJ620T RES , CARBON 1/5W 62 OHM 1


WAFER, STRAIGHT,
6PIN
WAFER, STRAIGHT,
4PIN
IC41 CVINJM2595MTE1 I.C , VIDEO S/W JRC 1
IC61 CVINJW1321FP1 I.C , VIDEO S/W JRC 1
JACK , (S-VIDEO +
JK40 CJJ9P003Z JACK 1
CVBS)
JACK , (S-VIDEO +
JK41 CJJ9R001Z JACK 1
CVBS)
JK62 CJJ4R045Z JACK , BOARD JACK 1
JK69 CJJ4S030Z JACK , BOARD JACK 1

29782_AVR132_ENG_sort 10/08/06 16:45 Side 34
Troubleshooting Guide
SYMPTOM CAUSE SOLUTION
Unit does not function when • No AC Power • Make certain AC power cord is plugged
Main Power Switch is pushed into a live outlet
• Check to see if outlet is switch controlled
Display lights, but no sound • Intermittent input connections • Make certain that all input and speaker
or picture connections are secure
• Mute is on • Press Mute button
• Volume control is down • Turn up volume control
Sound is heard, but Front-Panel • Display brightness is turned off • Follow the instructions in the Display Brightness section
Display does not light on page 27 so that the display is set to VFD FULL
No sound from any speaker; • Amplifier is in protection mode • Check speaker-wire connections for shorts at receiver
light around Power switch 1 is red due to possible short and speaker ends
• Amplifier is in protection mode • Contact your local Harman Kardon service depot
due to internal problems
No sound from surround or • Incorrect surround mode • Select a mode other than Stereo
center speakers • Incorrect configuration • Check speaker mode
• Stereo or Mono program material • With (analog or digital) Dolby surround modes, the surround
decoder may not create rear-channel
information from non-encoded programs
• Speakers not properly connected • Check speaker-wire connections or use test tone
to verify connections (see page 20)
Unit does not respond to • Weak batteries in remote • Change remote batteries
remote commands • Wrong device selected • Press the AVR selector 5
• Remote sensor E is obscured • Make certain front-panel sensor is visible to remote or
connect remote sensor
Intermittent buzzing in tuner • Local interference • Move unit or antenna away from computers, fluorescent lights,
motors or other electrical appliances
Letters flash in the Channel Indicator • Digital audio feed paused • Resume play for DVD
Display and Digital Audio stops • Check that Digital Signal is fed to the Digital Input selected
Processor Reset To clear the AVR’s entire system memory includ- NOTE: Resetting the processor will erase any
ing tuner presets, output level settings, delay configuration settings you have made for
In the rare case where the unit’s operation or the times and speaker configuration data, first put speakers, output levels, surround modes, digital
displays seem abnormal, the cause may involve the unit in Standby by pressing the System input assignments as well as the tuner presets.
the erratic operation of the system’s memory or Power Control button 1. Next, press and hold After a reset the unit will be returned to the
microprocessor. the Surround Mode Button 6 for 5 seconds. factory presets, and all settings for these items
must be reentered.
To correct this problem, first unplug the unit from The unit will turn on automatically. Note that
the AC wall outlet and wait at least three min- once you have cleared the memory in this manner, If the system is still operating incorrectly, there
utes. After the pause, reconnect the AC power it is necessary to re-establish all system configura- may have been an electronic discharge or severe
cord and check the unit’s operation. If the system tion settings and tuner presets. AC line interference that has corrupted the
still malfunctions, a system reset may clear the memory or microprocessor.
problem.
If these steps do not solve the problem, consult
an authorized Harman Kardon service depot.
34 TROUBLESHOOTING GUIDE
AMPLIFIER SECTION BIAS ADJUSTMENT
Measurement condition
.No input signal or volume position is minimum.
Standard value
.Ideal current = 48mA (± 5%)
.Ideal DC Voltage = 25.92mV (± 5%)
DC EVM
CUP11911Y (MAIN PCB)
+ -
CN61 CN64 CN63 CN65 CN62
VR32 VR33 VR34 VR35 VR36
DC VOLTMETER ; Connect to
CN66(SL),CN61(CEN),CN64(SR),CN63(FL),CN65(SBL/SL(AVR132,144,145)),CN62(FR),CN67(SBR)
NO. Channel Adjust for Adjustment

1 Front Left 25.92mV (± 5%) CN63
2 Front Right 25.92mV (± 5%) CN62
3 Center 25.92mV (± 5%) CN61
4 Surround Left 25.92mV (± 5%) CN65
5 Surround Right 25.92mV (± 5%) CN64
20061023_AVR132+144 WIRING.sch-1 - Mon Oct 23 16:15:57 2006
AVRx45 FRONT(20061023)SCH.sch-1 - Mon Oct 23 17:10:00 2006
AVR132+144 INPUT(20061011)SCH.sch-3 - Fri Oct 13 14:07:16 2006
AVR132 VIDEO(20061011)SCH.sch-1 - Fri Oct 13 16:35:57 2006
AVRx45 POWER(20061023)SCH.sch-1 - Mon Oct 23 17:14:10 2006

Harman Kardon AVR 132 230 Service Manual

Uploaded by

Copyright:

Available Formats

Harman Kardon AVR 132 230 Service Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Harman Kardon AVR 132 230 Service Manual

Uploaded by

Copyright:

Available Formats

AVR 132/230

Audio Section FM Tuner Section

Depth measurement includes knobs, buttons and terminal connections.

*Manufactured under license from Dolby Laboratories.

Logic 7 is a registered trademark of Lexicon, Inc.

The following check should be performed for the continued

LEAKAGE CURRENT CHECK

Measure leakage current to a known earth ground (water

ANY MEASUREMENTS NOT WITHIN THE LIMITS

Front Panel Controls

DIGITAL LOGIC 7 VID 1 DVD

Main Power Switch 7 Tuning E Remote Sensor Window

FRONT PANEL CONTROLS 5

Front Panel Controls

6 FRONT PANEL CONTROLS

Rear Panel Connections

0 Tape Inputs 9 Coaxial Digital Inputs I Video 1 Video Outputs

REAR PANEL CONNECTIONS 7

Rear Panel Connections

8 REAR PANEL CONNECTIONS

Surround Mode Chart

Surround Mode Chart

POLY BAG AM LOOP ANTENNA ASS'Y BATTERY ASS'Y FM 1 POLE ANT

5 6 7 8 2 SNOW PAD (L)

5 BOX ,OUT CARTON

POLY BAG BOOKLET,INFORMATION MANUAL INSTRUCTION MANUAL SETUP CODE

1 POLY BAG CPB1061Y 1

2 AM LOOP ANTENNA ASS'Y CSA1A027Z 1 6 ACCESSORY-2

4 FM 1 POL ANT(UL) CSA1A018Z 1

5 COVER ASS'Y CGRAVR130/230ZA 1 ACCESSORY-2

HQE1A273Z 5 BOX,OUT CARTON CPG1A820T 1

1. Removing the Top Cabinet 3. Removing the Rear Panel

4. Removing the Main PCB

2. Removing the Front Panel

FRONT PCB (CUP11910)

CUP11910-1 PCB , FRONT(FIP) PCB 1

CMC3A111 PLATE , EARTH PLATE 1

C905 CCEA1HKS2R2T CAP , ELECT 2.2UF 50V SMALL SIZE 1

Harman Consumer Group International

FRONT PCB (CUP11910)

Harman Consumer Group International

FRONT POWER (CUP11910-4)

Harman Consumer Group International

VR JACK PCB (CUP11910-6)

Harman Consumer Group International

PHONE JACK PCB (CUP11910-5)

Harman Consumer Group International

PHONE JACK PCB (CUP11910-5)

Harman Consumer Group International

MAIN PCB (CUP11911Z)

Harman Consumer Group International

MAIN PCB (CUP11911Z)

Harman Consumer Group International

MAIN PCB (CUP11911Z)

Harman Consumer Group International

MAIN PCB (CUP11911Z)

Harman Consumer Group International

MAIN PCB (CUP11911Z)

Harman Consumer Group International

RN74 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN75 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN76 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN77 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN78 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN79 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN80 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN81 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN82 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN84 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN85 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN87 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN90 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1

RN91 CRJ104DJ330T RES , 4ARRAY (16084) 33 OHM/16084 1