MUHAMMAD AWAIS ARSHAD

Nationality : Pakistani
Date of Birth : 08-07-1988
Marital Status : Married
Education : Bachelor of Engineering in Civil (B.E Civil)
:BGAS-CSWIP Painting Inspector Grade 2
:Quality Management System (QMS) ISO 9001:2015
Discipline : Painting QA/QC Inspector
Experience : More than 7 years

CAREER OBJECTIVE:

To work in a dynamic, team oriented, competitive and cooperative environment in a reputable

organization, where there is maximum chance of learning and grow as a proficient,innovative
and committed professional.

SYNOPSIS OF EXPERIENCE:

Overall 07 years of experience in Quality Control Inspection Painting.

ACADEMIC QUALIFICATION:

 Bachelor of Engineering in Civil (B.E Civil)

 Fsc Pre Engineering from ICB Islamabad.
 F.G.Model School for boys G-7/2 Islamabad

Computer skills:

MS Office, MS Excel, Auto CAD Internet Surfing

1|Page
LANGUAGES:

 English, Urdu and Punjabi

EXPOSURE TO INSPECTION INSTRUMENTS:

 Surface profile Needle Gauge.

 Dial Micrometers and Replica Tape (For profile).
 WFT measurement Tools.
 Eccentric Wheel and Comb Gauges.
 Destructive test Gauges(Paint Inspectors Gauge PIG)
 Non-destructive test Gauges(electronic and banana gauge)
 Adhesion V and Cross Cut test.
 Adhesion pull off dolly test.
 Adhesion tape test for Dust contamination.
 The whirling hygrometer.
 Relative humidity and Dew point calculator.
 Holiday/pinhole detector.

Gusan Construction Arabia Co., Ltd -Package 12 (Aug-2015 to Mar 2017)

Position held : QA/QC Inspector Painting

Client : Saudi Aramco)

Project : Jazan Refinery and Terminal Project (JRTP) EPC 12

Responsibilities:

 Review of painting specifications, Paint product technical data sheets, Safety data
sheets, blasting and painting procedures.
 To make sure that work is ongoing as per approved procedure, method statements and
specifications.
 Coating personnel
 qualification review and getting the JCC (Job Competence Cards).
 Surface preparation of concrete Foundations, pedestals, manholes, Misc foundations
and other structures.
 Take moisture test (Plastic Sheet Method) on the concrete surfaces to make sure that
substrate is ready for coating (APCS-10 and APCS-3).
 Surface preparation of exposed above ground concrete structures to ensure that surface
is ready for coating (APCS-1B).

2|Page
  Surface preparation and moisture test of the structures like Neutralization pits and
Chemical storage areas to make sure that surface is ready for coating (APCS-2E).
 Inspection of primer coating.
 In-process application of intermediate or top coat application.
 Check DFT on concrete surface by using positector TC 200 & ultrasonic gel (couplaint).
 Material receiving inspection for concrete repairing and coating materials.
 Inspection of Visco Elastic Coating System with Backing Tape for buried pipelines.
 Reviewing the ambient condition and to ensure the weather condition is suitable for
blasting and painting.
 Conducting Blasting and painting equipment inspection.
 Coordinating, witnessing and documenting of painting activities through the preparation
of daily inspection Reports, through raising RFIs, inspection and documentation.

R B Hilton Saudi Arabia LTD. (Dec-2014 to June-2015)

Position held : QA/QC Inspector Painting

Client : Saudi Aramco.

Project : Rabigh phase 2 Petrochemical, Petro Rabigh K.S.A.

Responsibilities:

 Review of all Paints & Coating Specification, Manufacture’s data sheet, Painting Crew
personnel Approvals, Equipment calibration Certificates, Safety Standards and other
Painting/ Coating related documents.
 Conducting Blasting and painting equipment inspection.
 Conducting Material receiving inspection.
 Reviewing the ambient condition and ensure the weather condition is suitable for
blasting and painting.
 Attend Pre- job meeting and Weekly Progress meetings.
 Assess the condition of the substrate prior to start blast cleaning and painting activities.
 Monitoring surface preparation as per the standard requirement.
 Ensure surface cleanliness prior to coating application.
 Witness and inspect each coat of Paint application.
 Measure WFT /DFT requirement as per the relevant standard and specification.

3|Page
  Witnessl Holiday Test and repair damages, if any, with compatible system as per the
standard and specific data sheet.
 Ensure the Work has been accomplished as per the Specification set by the client.
 Raise RFI for Final Inspection to the Client Inspector.
 Prepare daily reports and document for future reference and handover to the client upon
the completion of the Project.
 Preparation of Tool box meetings to improve the Quality system and practice.
 Conduct Training Program for blasters, Painters and Supervisors as a part of continual
Quality system improvement.
 Arranging and witnessing Qualification test for blasters, Painters and Crew Supervisors.
 Conducting adhesion test and preparation of report.

Drake & Scull-ICC (Apr-2013 to Oct-2014)

Position held : QA/QC Inspector Painting

Client : Saudi Aramco

Project : Kaust-PSS-Project, Thuwal Jeddah.

Responsibilities:

 Review of painting specifications, Paint product technical data sheets, Safety data
sheets, standars and painting procedures. .
 Material receiving inspection, verification documentation and assurance of good storage
conditions.
 Responsible for checking the validity of calibration certificates of all inspection tools and
equipment prior to and during work execution.
 Coordinating, witnessing and documenting of painting activities through the preparation
of daily inspection Reports, through raising RFIs, inspection and documentation.
 Surface preparation of concrete foundations, columns and wall panels.
 Take moisture test (Plastic Sheet Method) on the concrete surfaces to make sure that
substrate is ready for coating (APCS-10 and APCS-1B).
 Inspection of primer coating.
 In-process application of intermediate or top coat application.
 Check DFT on concrete surface by using positector & ultrasonic gel (couplaint).
 Preparation of Tool box meetings to improve the Quality system and practice.

4|Page
SKEC (Sun Kyoung Engineering & Construction) (Dec 2011 to Nov 2012)

Position held : QA QC Inspector Civil / Painting

Client : Saudi Aramco

Project : KAPSARC ( King Abdullah Petroleum Studies & Research Center Al Riyadh )

Responsibilities:

 Raise request for inspection (RFI) for the work performed to saudi Aramco project
management team & project inspection department for checking, verification and
approval.

 Inspection of construction activities at site like wall, building work, foundations, covering
slab,earth work like excavation and backfilling.

 Perform layer by layer Backfilling work at site and coordinate with third party for FDT.

 Surface preparation, soaking and formwork inspection of grouting area.

 Inspection of surface preparation prior to final coating application for all elements.

 Coordinate with third party for final DFT of APCS 10.

 Complete all paper work required accurately and ensure that copies are retained and
well kept.

 Check and review the plans & specifications for the proper construction & quality
implementation at job site.

 Implementation of project specification & project quality plan at site

 If any construction operations are observed as being unsatisfactory then will immediately
instruct the construction supervisor to correct these. If appropriate action is not taken
then a non - conformance Report will be raised.

Capital Builders (Oct-2010 to Aug-2011)

Position held : Painting and Civil Supervisor

Client : Pakistan Atomic Energy Commission (PAEC).

Project : Construction of N-block PAEC Islamabad

5|Page
  All work should be done according to the detail drawing and planning specified by
consultant organization.
 Supervision of layout of earth work prior to excavations according to IFC drawing.
 Handling, storage and preservation of FBE coated rebar and their touch up if any
damage.
 Supervise the asphalt bituminous coating and application of protective bituminous
coating sheets.
 Coordinate with consultant representative for pre pouring inspection like inspection of
rebar and formwork.
 Monitor the concrete pouring and make sure concrete design mix is as per standards
and specifications.
 Perform the slump test, temperature test and compressive strength test in presence of
consultant representative.
 Manage all the work with minimum wastage of material, manpower and as per planned
budget.
 Carried out all work related documentation like preparing of BOQ, BBS and ensure the
copies are retained and well kept.

PERSONAL DETAIL

 Name : Muhammad Awais Arshad

 Father name : Muhammad Arshad
 Date of Birth : 08-07-1988
 Nationality : Pakistani
 Religion : Islam
 Marital Status : Married

6|Page