Jotun ARAMCO Systems
Jotun ARAMCO Systems
Jotun ARAMCO Systems
Ltd
SAUDI ARAMCO PAINTING SPECIFICATION
Notes/Remarks
Please refer to the product technical datasheet for additional information. The spreading rate is theoretical, customer should add the appropriate wastage factor.
Disclaimer
Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. In the event that supplies are made and technical advice is given by one
of our associated companies or dealers, then such supplies and technical advice shall be subject to the standard of that company, a copy which is available upon request. The given data must be considered as guidline
only, the figures in some columns may be rounded. Drying times and paint consumptions may vary depending on actual conditions.
For update information about our products please refer to our web site at www.jotun.com
Approved by Technical Service Department:
J.sergio dos Santos/APCS2010specification Revision: 2 Date: July 17th, 2011 Jotun Paints Saudi Arabia
JOTUN SAUDIA Co. Ltd
SAUDI ARAMCO PAINTING SPECIFICATION
APCS 1B
Typical Use: Severe atmospheric exposure. Max. service temperature 150 0C
Coating System: Epoxy
Surface Preparation: Blastcleaned to Sa 21/2 (ISO 8501-1:1988), SSPC-SP10,profile 40-65µm
SYSTEM INFORMATION FC = Full Coat
Type of Product Name Shade DFT µm WFTµm Volume Theoretical Overcoat Overcoat Application Method
Coat Solid % m2 / ltr min 23oC max 23oC Brush Roller Spray
F/C Penguard Express ZP Red 95 128 74 8 2hr 4 days X
F/C Penguard Express Grey 100 135 74 7 2hr 4 days X
F/C Penguard FC Choice 80 129 62 8 7.5hr 4 days X
Notes/Remarks
Please refer to the product technical datasheet for additional information. The spreading rate is theoretical, customer should add the appropriate wastage factor.
Disclaimer
Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. In the event that supplies are made and technical advice is given by one
of our associated companies or dealers, then such supplies and technical advice shall be subject to the standard of that company, a copy which is available upon request. The given data must be considered as guidline
only, the figures in some columns may be rounded. Drying times and paint consumptions may vary depending on actual conditions.
For update information about our products please refer to our web site at www.jotun.com
Approved by Technical Service Department:
J.sergio dos Santos/APCS2010specification Revision: 2 Date: July 17th, 2011 Jotun Paints Saudi Arabia
JOTUN SAUDIA Co. Ltd
SAUDI ARAMCO PAINTING SPECIFICATION
APCS 1D
Typical Use: Severe atmosphere exposure, usually outdoors. Max. service temperature 80 0C. Generally not recommended for Maint.
Coating System: Inorganic Zinc primer / Epoxy / Polyurethane
Surface Preparation: Blastcleaned to Sa 21/2 (ISO 8501-1:1988), SSPC-SP10,profile 40-65µm
SYSTEM INFORMATION * F/C = Full Coat
Type of Product Name Shade DFT µm WFTµm Volume Theoretical Overcoat Overcoat Application Method
Coat Solid % m2 / ltr min 23oC max 23oC Brush Roller Spray
F/C Resist 78 Grey 65 90 72 11 4hr None X
F/C Penguard Express Buff 110 149 74 7 8hr 7 days X
F/C Hardtop XP Choice 50 79 63 13 5hr 5 days X
9ltrs comp A
Resist 78 Comp. B + zinc powder 8 40 min 4/25 0.018-0.023 1400 14 3 90 10 0C
Penguard Express Comp. B 4:1 2 3hr 17 0.018-0.027 2100 32 3 80 10 0C
Hardtop XP Comp. B 10:1 1,5 2hr 10 0.011-0.017 2100 30 3 80 10 0C
Notes/Remarks
Please refer to the product technical datasheet for additional information. The spreading rate is theoretical, customer should add the appropriate wastage factor.
Disclaimer
Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. In the event that supplies are made and technical advice is given by one
of our associated companies or dealers, then such supplies and technical advice shall be subject to the standard of that company, a copy which is available upon request. The given data must be considered as guidline
only, the figures in some columns may be rounded. Drying times and paint consumptions may vary depending on actual conditions.
For update information about our products please refer to our web site at www.jotun.com
Approved by Technical Service Department:
J.sergio dos Santos/APCS2010specification Revision: 2 Date: July 17th, 2011 Jotun Paints Saudi Arabia
JOTUN SAUDIA Co. Ltd
SAUDI ARAMCO PAINTING SPECIFICATION
APCS 2A
Typical Use: Immersion service particulary for raw treated waters & GOSP traps handling hot crude oil/brine solution. Not suitable for potable water
Max. service temperature 90 0C
Coating System: Phenolic Epoxy (Self-Priming)
Surface Preparation: Blastcleaned to Sa 3 (ISO 8501-1:1988), SSPC-SP5,profile 50-85µm
SYSTEM INFORMATION * FC = Full Coat
Type of Product Name Shade DFT µm WFTµm Volume Theoretical Overcoat Overcoat Application Method
Coat Solid % m2 / ltr min 23oC max 23oC Brush Roller Spray
F/C Tankguard AR Grey 100 147 68 7 8hr 30 days X
F/C Tankguard AR Red 100 147 68 7 8hr 30 days X
F/C Tankguard AR Grey 100 147 68 7 8hr 30 days X
Notes/Remarks
Please refer to the product technical datasheet for additional information. The spreading rate is theoretical, customer should add the appropriate wastage factor.
Disclaimer
Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. In the event that supplies are made and technical advice is given by one
of our associated companies or dealers, then such supplies and technical advice shall be subject to the standard of that company, a copy which is available upon request. The given data must be considered as guidline
only, the figures in some columns may be rounded. Drying times and paint consumptions may vary depending on actual conditions.
For update information about our products please refer to our web site at www.jotun.com
Approved by Technical Service Department:
J.sergio dos Santos/APCS2010specification Revision: 2 Date: July 17th, 2011 Jotun Paints Saudi Arabia
JOTUN SAUDIA Co. Ltd
SAUDI ARAMCO PAINTING SPECIFICATION
APCS 2C
Typical Use: Immersion service for de-mineralized water and boiler skim tanks. Max. service temperature 1200C
Coating System: Phenolic Epoxy (Self-Priming)
Surface Preparation: Blastcleaned to Sa 3 (ISO 8501-1:1988), SSPC-SP5,profile 50-85µm
SYSTEM INFORMATION * FC = Full Coat
Type of Product Name Shade DFT µm WFTµm Volume Theoretical Overcoat Overcoat Application Method
Coat Solid % m2 / ltr min 23oC max 23oC Brush Roller Spray
F/C Tankguard AR Grey 100 147 68 7 8hr 30 days X
F/C Tankguard AR Red 100 147 68 7 8hr 30 days X
F/C Tankguard AR Grey 100 147 68 7 8hr 30 days X
Notes/Remarks
Please refer to the product technical datasheet for additional information. The spreading rate is theoretical, customer should add the appropriate wastage factor.
Disclaimer
Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. In the event that supplies are made and technical advice is given by one
of our associated companies or dealers, then such supplies and technical advice shall be subject to the standard of that company, a copy which is available upon request. The given data must be considered as guidline
only, the figures in some columns may be rounded. Drying times and paint consumptions may vary depending on actual conditions.
For update information about our products please refer to our web site at www.jotun.com
Approved by Technical Service Department:
J.sergio dos Santos/APCS2010specification Revision: 2 Date: July 17th, 2011 Jotun Paints Saudi Arabia
JOTUN SAUDIA Co. Ltd
SAUDI ARAMCO PAINTING SPECIFICATION
Notes/Remarks
Please refer to the product technical datasheet for additional information. The spreading rate is theoretical, customer should add the appropriate wastage factor.
Disclaimer
Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. In the event that supplies are made and technical advice is given by one
of our associated companies or dealers, then such supplies and technical advice shall be subject to the standard of that company, a copy which is available upon request. The given data must be considered as guidline
only, the figures in some columns may be rounded. Drying times and paint consumptions may vary depending on actual conditions.
For update information about our products please refer to our web site at www.jotun.com
Approved by Technical Service Department:
J.sergio dos Santos/APCS2010specification Revision: 2 Date: July 17th, 2011 Jotun Paints Saudi Arabia