TECHNICAL DATA SHEET

JIB CRANE PRODUCT SPECIFICATION SHEET

JIB CRANES
Fax to 262-790-4202 E Q U I P M E N T , I N C .®

Name:
Title: WIDE SELECTION OF MODELS
Company: Bushman Equipment, Inc. offers a complete
Address: line of quality-built jib cranes to meet the most
demanding material handling requirements.
There are various jib crane models from which
City: to choose: floor-mounted pillar types; top and
bottom-supported units; wall or column-mounted
State: versions; and models that afford manual or
Zip Code: motorized rotation. Built to the highest industry
standards, Bushman jib cranes have earned a
Phone: reputation for ruggedness and durability.
Fax:
CAPACITY
e-mail:
Company Web Capacities are based on the live load at the hoist
Site Address: hook, making allowances for hoist and trolley
weights, and impact. A safety factor of at least
3:1 is designed into each crane.
Type of Jib Crane: M 480 FPM M 484 CMCB M 486 WBFC

M 480 CBM M 483 CMTR M 481 WCM

JIB CRANE SELECTOR CHART
Capacity lbs.

Span (A) in. Type Type

Rotation of Rotation of
Underboom (B) in. Required Mount Type Model Pages Required Mount Type Model Pages

Motorization M Yes M No Floor

Plate Wall
480-FPM 3-5 486-WBFC 11
If yes, what are your power requirements? 360° or 180° or
480-CBM 6-8
Volts M AC Phase Hertz Concrete Column
Volts M DC Base

M Tagline M Anchor Bolts for FPM M Top Entry

®

Options Desired: Top &

Floor 480-LD 9 Bottom 486-CMCB 12-13
M Festoon System M Air Swivel M Bottom Entry 360° 360°
Plate Supports
Available
M Collector Rings

Comments: ___________________________________________________________________________________ Wall Top &

or 481-WCM 10 Bottom 483-CMTR 12-13
______________________________________________________________________________________________ 180° 360°
Column Supports
______________________________________________________________________________________________ Available

______________________________________________________________________________________________
______________________________________________________________________________________________

© 2002 Bushman Equipment, Inc.

E Q U I P M E N T , I N C .® E Q U I P M E N T , I N C .®
P.O. Box 309 • Butler, WI 53007-0309 Bulletin JC03 P.O. Box 309 • Butler, WI 53007-0309
262-790-4200 • Fax 262-790-4202 262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com E-Mail: custinfo@bushman.com • www.bushman.com
 CUSTOM-DESIGNED JIB CRANES MODEL 481-WCM
MODEL M480 MOTORIZED JIB CRANES With boom extension

APPLICATION ®

Motorized rotating jib cranes are widely MODEL M480 MOTORIZED JIB CRANE
used to control or position the load in an 10-ton capacity, 35' span,
area that is generally inaccessible to 20' underboom
material handling equipment, or where
the load, weight or duty cycle make it
impractical to employ manual rotation.
®

Bushman motorized jib cranes are

designed to provide reliable, long-life
performance with minimal maintenance. MODEL 482/486 JIB CRANE
180° rotation, full cantilever
boom on free-standing mast
M480-MOTORIZED, 360° ROTATION

Jib cranes are available with either the

base plate for floor mounting or without the
base for mounting the pillar directly into
a concrete foundation. Refer to pages MODEL 482-D
4 to 8 for standard range of sizes and Two booms on single
specifications. Consult factory for larger free-standing mast
units.

In addition to the standard jib crane

construction features, these motorized ®

units include: motor, variable speed

electronic drive, heavy-duty chain drive,
pintle pin and reducer. Optional equipment
includes current collector rings for 360° MODEL M483
continuous electrification, and tagline Motorized floor to ceiling
assembly for festooned hoist conductor 360° rotating crane
cables. Control push buttons are usually
®

incorporated into the hoist push button ®

station to facilitate operator control

(push button optional). MODEL H480
Hand geared rotating
The motorized drive rotation of the jib cranewith self-locking
boom typically provides a rotation speed drive
of 1/2 RPM, but speeds up to 1 RPM are
available. MODEL M484 CMFC
Motorized rotation,
full cantilever floor to
ceiling crane

2 15
E Q U I P M E N T , I N C .®
P.O. Box 309 • Butler, WI 53007-0309
262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com
 OPTIONS
BOTTOM ENTRY COLLECTOR RING ASSEMBLY AIR SWIVEL 480-FPM FLOOR-PLATE-MOUNTED A

Optional bottom entry electrical collector assembly This feature provides the capability of 360° rotation
includes: junction box, internal wiring, collector when using an air hoist on the boom. Included is a pipe FREE STANDING 360° ROTATION
assembly in web of beam, and junction box in head nipple 12" above the floor for attaching the air supply
®

assembly for power connection to electrical hoist. hose, a pipe running inside the pillar connecting to the OPTIONAL FEATURES
swivel fitting, and a connector to which the air hose for
the hoist can be attached. Top entry systems are also • Tagline H
available. • Festoon systems
Shielded collector rings • Collector ring assemblies
(3 conductors standard) • Motorized rotation
connectors for attaching • Hand-geared rotation
conductor to hoist Swivel fitting • Rotation stops
Heavy conductor wires • Air swivel
furnished inside pillar • Special boom B
Pipe
• Special mounting bolt pattern
Junction box furnished
for field connection to • Anchor bolts
power supply Pipe nipple to
attach air supply See page 9 for suggested
T (Diameter)
foundation requirements.

18"

TOP ENTRY COLLECTOR ASSEMBLY

Top entry electrical collector assembly may be used on

all size cranes where electrical power source can be HAND GEARED ROTATION
connected from top of jib. Internal wiring in pillar is not MODEL H480-FPM ®

FLOOR PLATE MODEL FPM -

necessary. Alternate collector assemboy
5" BASE PLATES Ground or floor level
for topentry electrification
9"
BOLTS
BASE “R” BOLT “P” BASE J
TYPE NO. SIZE CIRCLE DIA. DIM.
R Dia. Bolt Circle R Dia. Bolt Circle
A 6 3
/ 4" 26" 30" -
_______________________________________________
B 6 1" 32" 36" -
_______________________________________________
C 6 11/4" 38" 42" -
ANCHOR BOLTS _______________________________________________ P P
TAGLINE FESTOON SYSTEM D 12 1" 48" 5"
BASE 44"
_______________________________________________ J
6"
An improved system is offered which includes a TYPE QUANT. DIA. LENGTH
E 12 11/4" 44" 48" 5"
messenger wire, swivel eye pulleys, and cable A 6 3
/ 4" 36" _______________________________________________ G Bolt Dia. G Bolt Dia.
connections, with capabilities for attaching round cable. B 6 1" 36" F 12 1 /2 " 1
50" 54" 5 /2 " 1

Mounting Brackets (2) Length _______________________________________________ 6 Hold Layout 12 Hole Layout

C 6 11/4" 42"
Messenger wire
D 12 1" 42" G 12 11/2 " 54" 60" 6"
_______________________________________________
E 12 1
1 /4" 42"
H 12 13/4 " 54" 60" 6"
F 12 11/2 " 42" _______________________________________________
4" G 12 11/2 " 42" NOTE: For sizes not shown in chart consult factory.
H 12 13/4 " 42"
Cable by others Dia.

14 3 E Q U I P M E N T , I N C .®
P.O. Box 309 • Butler, WI 53007-0309
262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com
 360° ROTATION 483-CMTR 484-CMCB
MODEL 480-FPM — FLOOR-PLATE-MOUNTED SPECIFICATIONS
CAPACITY *D WEIGHT *D WEIGHT
8 FOOT SPAN “A” 10 FOOT SPAN “A” 12 FOOT SPAN “A” 14 FOOT SPAN “A” IN LBS. A **B (MIN.) H IN LBS. (MIN.) H K IN LBS.
CAPACITY B H T WT H T WT H T WT H T WT
TONS HEIGHT BEAM PILLAR BASE LB. BEAM PILLAR BASE LB. BEAM PILLAR BASE LB. BEAM PILLAR BASE LB. 8' 13' 6" 6" 390 10' 11" 6" 2' 6" 500
10' 14' 0" 6" 418 10' 11" 6" 3' 0" 525
8' 6 6 A 720 7 6 A 776 7 8 A 875 8 8 A 958 12' 14' 6" 6" 450 11 ' 0" 7" 3' 0" 645
10' 6 6 A 770 7 6 A 814 7 8 A 925 8 8 A 1007 500 14' 10' 15' 0" 6" 517 11 ' 0" 7" 3' 6" 809
12' 6 6 A 837 7 8 A 943 7 8 A 974 8 10 B 1296 16' 16' 0" 6" 670 11 ' 0" 7" 4' 0" 870
1/4 14' 6 6 A 977 7 8 A 993 7 10 B 1273 8 10 B 1358 18' 16' 6" 6" 698 11' 1" 8" 5' 0" 1035
16' 7 6 A 1027 7 8 A 1042 7 10 B 1336 8 10 B 1421 20' 17' 6" 7" 932 11' 1" 8" 5' 0" 1075
18' 7 8 A 1076 7 8 A 1091 7 10 B 1398 8 10 B 1483
20' 7 8 A 1126 7 8 A 1141 7 10 B 1461 8 10 B 1545 8' 13' 6" 6" 462 10' 11" 6" 2' 6" 677
10' 14' 0" 6" 507 11' 0" 7" 3' 0" 714
8' 7 8 A 879 8 8 A 879 8 10 B 1128 10 10 B 1280 12' 14' 6" 6" 591 11' 0" 7" 3' 0" 783
10' 7 8 A 929 8 8 A 929 8 10 B 1190 10 10 B 1343 14' 15' 0" 7" 631 11' 1" 8" 3' 6" 945
12' 7 8 A 1216 8 10 B 1216 8 10 B 1253 10 10 B 1405 1,000 16' 10'
16' 0" 7" 715 11' 1" 8" 4' 0" 1070
14' 7 8 A 1278 8 10 B 1278 10 10 B 1417 10 12 C 1906
1/2 16' B 8 B 1341 12 C 1993
18' 16' 6" 8" 878 11' 3" 10" 5' 0" 1276
7 10 1341 10 10 10 B 1479 10 20' 17' 6" 8" 994 11' 3" 10" 5' 0" 1394
18' 7 10 B 1403 8 10 B 1403 10 10 B 1541 10 12 C 2081
20' 7 10 B 1466 8 10 B 1466 10 12 C 2117 10 12 C 2168 8' 7" 520 11' 0" 7" 2' 6" 804
13' 6"
10' 14' 0" 7" 545 11' 1" 8" 3' 0" 865
8' 8 10 B 1055 10 10 B 1184 10 12 C 1592 12 12 C 1751 12' 686 3' 0" 970
14' 6" 7" 11' 1" 8"
10' 8 10 B 1117 10 10 B 1241 10 12 C 1680 12 12 C 1839 14' 768 3' 6" 1127
15' 0" 7" 11' 3" 10"
12' 8 10 B 1179 10 10 B 1303 10 12 C 1767 12 12 C 1926 2,000 16' 10' 16' 0" 8" 823 11' 3" 10" 4' 0" 1229
1 14' 10 10 B 1310 10 12 C 1804 12 12 C 1950 12 14 C 2231 18' 1645
16' 6" 8" 1037 11' 5" 12" 5' 0"
16' 10 10 B 1372 10 12 C 1892 12 12 C 2038 12 14 C 2340 20' 17' 6" 10" 1239 11' 5" 12" 5' 0" 1861
18' 10 10 B 1434 10 12 C 1979 12 12 C 2125 12 14 C 2449
20' 10 12 C 2016 12 12 C 2149 12 14 C 2495 12 16 D 3284 8' 13' 6" 7" 672 11' 1" 8" 2' 6" 972
10' 14' 0" 8" 844 11' 1" 8" 3' 0" 1020
8' 10 10 B 1133 10 10 B 1184 12 12 C 1742 12 12 C 1742 12' 14' 6" 8" 938 11' 3" 10" 3' 0" 1229
10' 10 10 B 1195 10 12 C 1629 12 12 C 2006 12 14 C 2006 14' 15' 6" 8" 1108 11' 3" 10" 3' 6" 1325
12' 10 10 B 1258 10 12 C 1716 12 14 C 2784 12 16 D 2784 3,000 16' 10'
16' 0" 10" 1178 11' 5" 12" 4' 0" 1639
1-1/2 14' 10 12 C 1753 12 12 C 1878 12 14 C 2909 12 16 D 2909 18' 17' 0" 10" 1565 11' 5" 12" 5' 0" 1790
16' 10 12 C 1841 12 12 C 1965 12 14 C 3210 15 16 D 3210 20' 17' 6" 10" 1675 11' 8" 15" 5' 0" 2157
18' 10 12 C 1929 12 12 C 2053 12 16 D 3335 15 16 D 3335
20' 12 12 C 2077 12 14 C 2425 12 16 D 3460 15 16 D 3460 8' 15' 6" 10" 832 13' 4" 10" 2' 6" 1121
10' 16' 0" 10" 1080 13' 4" 10" 3' 0" 1163
8' 10 10 C 1133 12 12 C 1615 12 12 C 1679 15 14 C 2074 12' 16' 6" 10" 1090 13' 4" 10" 3' 0" 1227
10' 10 12 C 1578 12 12 C 1703 12 14 C 1943 15 14 C 2184 14'
12' 17' 6" 10" 1328 13' 6" 12" 3' 6" 1586
12' 10 12 C 1666 12 14 C 1988 12 14 C 2052 15 16 D 2960 4,000 16'
12 18' 0" 10" 1516 13' 6" 12" 4' 0" 1678
14' 10 12 C 1753 14 C 2097 15 14 C 2316 15 16 D 3085
2 16' 12 12 C 1902 12 14 C 2207 15 14 C 2425 15 16 D 3210
18' 19' 0" 12" 1625 13' 9" 15" 5' 0" 2267
20' 19' 6" 12" 1833 13' 9" 15" 5' 0" 2420
18' 12 12 C 1989 15 14 C 2449 15 16 D 3249 15 18 E 3803
20' 12 14 C 2361 15 14 C 2558 15 16 D 3374 15 18 E 3944 8' 16' 0" 10" 1050 13' 4" 10" 2' 6" 1245
10' 16' 0" 10" 1144 13' 6" 12" 3' 0" 1361
8' 12 12 C 1551 15 12 C 1741 15 16 D 2623 18 16 D 2981 12' 17' 0" 10" 1404 13' 6" 12" 3' 0" 1500
10' 12 12 C 1639 15 12 C 1833 15 16 D 2709 18 16 D 3122 14' 17' 7" 10" 1698 13' 9" 15" 3' 6" 1890
12' 12 14 C 1925 15 14 C 2121 15 16 D 2795 18 16 D 3263 6,000 12'
16' 12" 1850 4' 0" 2045
3 14' 12 14 C 2034 15 14 C 2230 15 16 D 2881 18 16 D 3405 18'
18' 6" 13' 9" 15"
16' 15 14 C 2254 15 16 D 2881 15 16 D 2967 18 18 E 3865 19' 0" 12" 2000 14' 0" 18" 5' 0" 2549
20' 20' 0" 15" 2420 14' 0" 18" 5' 0" 2800
18' 15 14 C 2363 15 16 D 3006 18 16 D 3599 18 18 E 4006
20' 15 14 C 2472 15 16 D 3131 18 16 D 3719 18 20 E 4552
8' 16' 6" 10" 1607 13' 9" 15" 2' 6" 1940
10' 17' 0" 10" 1911 13' 9" 15" 3' 0" 2027
8' 15 16 D 2452 18 18 E 3021 18 18 E 3191 20 18 E 3481
12' 17' 6" 12" 2044 14' 0" 18" 3' 0" 2518
10' 15 16 D 2577 18 18 E 3223 18 18 E 3332 20 18 E 3622 10,000 12'
14' 18' 0" 12" 2377 14' 0" 18" 3' 6" 2810
12' 15 16 D 2702 18 18 E 3364 18 18 E 3473 20 18 E 3763
14' 15 16 D 2827 18 18 E 3505 18 18 E 3614 20 20 F 4262 19' 0" 15" 2700 14' 2" 20" 4' 0" 3550
5 16' D 18 20 F
15 16 3015 18 E 3646 18 20 F 4128 20 4419
18' 15 16 D 3140 18 18 E 3787 18 20 F 4286 20 24 G 5348
20' 15 18 E 3687 18 18 E 3928 20 20 F 4601 20 24 G 5537 * “D” is the minimum dimension available based on indicated “B” dimension.
** Dimension of under boom clearance can be modified proportionately with dimension “D” - consult factory.
Consult factory for sizes or capacities not shown.
NOTE: For sizes not shown in chart, consult factory.

4 13 E Q U I P M E N T , I N C .®
P.O. Box 309 • Butler, WI 53007-0309
262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com
 MODEL 483-CMTR AND MODEL 484-CMC
MODEL 480-FPM — FLOOR-PLATE-MOUNTED SPECIFICATIONS (CONTINUED)
The 483 and 484 jib crane models provide 360° of lubrication fitting. The top bearing is a sealed ball
rotation and are used where support can be provided for bearing with provision to allow for expansion and 16 FOOT SPAN “A” 18 FOOT SPAN “A” 20 FOOT SPAN “A”
the top bearing assembly by securing to a ceiling, truss, contraction of the structure to which it is attached. CAPACITY B H T WT H T WT H T WT
wall, beam or column. The bottom bearing assembly is The jib boom is a standard I-beam. All parts are TONS HEIGHT BEAM PILLAR BASE LB. BEAM PILLAR BASE LB. BEAM PILLAR BASE LB.
secured to the floor or to a foundation. factory tested to assure proper fit and alignment. 8' 8 10 B 1208 10 10 B 1382 10 10 B 1433
10' 8 10 B 1270 10 10 B 1444 10 10 B 1495
12' 10 10 B 1456 10 10 B 1507 10 12 C 1970
The mast and boom are made of heavy structural beams, The overall height of the mast assembly can be varied
1/4 14' 10 10 B 1518 10 10 B 1569 10 12 C 2058
fabricated in sections for easy shipping and handling. The to suit existing conditions and will proportionately 16' 10 10 B 1581 10 12 C 2095 10 12 C 2146
bottom bearing is a self-aligning tapered roller bearing in change the height under the boom (B dimension). 18' 10 10 B 1643 10 12 C 2182 10 12 C 2233
a machined housing and is provided with a pressure 20' 10 10 B 1705 10 12 C 2270 12 12 C 2458

8' 10 10 B 1331 12 12 C 1869 12 12 C 1933

MODEL 483-CMTR APPLICATION 10' 10 12 C 1781 12 12 C 1957 12 12 C 2021
12' 10 12 C 1869 12 12 C 2044 12 14 C 2306
14' 10 12 C 1956 12 12 C 2132 12 14 C 2415
A
The 483-CMTR is used where the tie rod type of boom 1/2 12 12 C 2156 12 14 2461 12 14 C 2525
Ceiling or 16' C
roof truss support will provide sufficient clearance under the boom. 18' 12 12 C 2243 12 14 C 2570 15 14 C 2878
20' 12 12 C 2331 12 14 C 2679 15 14 C 2987
MODEL 483 AND 484
8' 12 12 C 1815 15 12 C 2089 15 12 C 2175
TOP & BOTTOM
10' 15 12 C 2091 15 14 C 2176 15 14 C 2441
®
MOUNTING PLATE DIMENSIONS
12' 15 14 C 2379 15 14 C 2464 15 16 D 3217
1 14' 15 14 C 2488 15 14 C 2573 15 16 D 3342
Dim. P Dim. R 16' 15 14 C 2599 15 16 D 3381 15 16 D 3467
H R
D Capacity Plate Hole Bolt 18' 15 16 D 3421 15 16 D 3507 18 16 D 3873
(Tons) Size Loc. Dia. 20' 15 16 D 3546 15 16 D 3632 18 16 D 3998
483-CMTR
COLUMN MAST TYPE
B P R 1
/4 - 11/2 7" 3 8' 15 14 C 2160 15 14 C 2246 18 16 D 3247
TIE ROD 9" / 4"
10' 15 14 C 2269 15 16 D 3006 18 16 D 3372
BOOM SUPPORT 16 3045 18 D 3498
12' 15 D 15 16 D 3131 16
2-3 12" 91/2" 1"
1-1/2 14' 15 16 D 3171 15 18 E 3692 18 18 E 4052
P 16' 15 18 E 3748 15 18 E 3834 18 18 E 4193
5 14" 10" 11/4" 18' 15 18 E 3889 18 18 E 4225 18 20 F 4723
20' 15 18 E 4030 18 18 E 4366 18 20 F 4881
Ground or floor level
NOTE: Mounting bolts are NOT INCLUDED. 16 2795 18 E 3628
8' 15 D 18 16 D 3200 18
10' 15 16 D 2920 18 16 D 3225 18 18 E 3770
12' 15 16 D 3045 18 16 D 3450 18 18 E 3911
MODEL 484-CMCB 14' 15 18 E 3607 18 18 E 3942 20 18 E 4409
APPLICATION 2 16' 15 18 E 3748 18 18 E 4084 20 18 E 4566
A 18' 18 18 E 4115 18 20 F 4615 20 20 F 4723
Ceiling or The 484-CMCB is used where the available headroom 20' 18 18 E 4257 18 20 F 4771 20 20 F 4881
roof truss
dictates that the jib boom be as high as possible to 3410
8' 18 18 E 20 18 E 3733 20 20 F 4173
®

provide adequate clearance under the boom. Note that 10' 18 18 E 3551 20 18 E 3894 20 20 F 4330
the compression brace limits hoist travel. Special 12' 18 18 E 3692 20 18 E 4015 20 20 F 4487
H
V-bracing can be provided to accommodate full hoist 3 14' 18 18 E 3833 20 18 E 4156 20 20 F 4644
16' 18 20 F 4347 20 20 F 4671 20 20 F 5235
travel. 20 F 4506 24 24 G 5731
18' 18 20 20 F 5312
K 20' 20 20 F 4854 20 20 F 5520 24 24 G 5920
484-CMCB A
COLUMN MAST TYPE 8' 24 20 F 4206 24 20 F 4366 24 20 F 4526
COMPRESSION BRACED H 10' 24 20 F 4363 24 20 F 4523 24 20 F 4683
D
BOOM 12' 24 20 F 4520 24 20 F 4680 24 24 G 5488
B 14' 24 20 F 4678 24 24 G 5517 24 24 G 5677
5 24 24 G 5546 24 24 5706 24 24 G 5866
484-CMFC 16' G
D 24 24 G 5736 24 24 5896 24 24 H 6599
B THE MODEL 484 IS 18' G
ALSO AVAILABLE IN 20' 24 24 G 5925 24 24 G 6085 24 24 H 7754
A FULL CANTILEVER
DESIGN. PLEASE
CONSULT FACTORY. NOTE: For sizes not shown in chart, consult factory.
Ground or floor level

12 5
E Q U I P M E N T , I N C .®
P.O. Box 309 • Butler, WI 53007-0309
262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com
 MODEL 486-WBFC JIB CRANES
* MTG. BEAM
A
480-CBM CONCRETE-BASE-MOUNTED CAPACITY SPAN CENTER SIZE WEIGHT
486-WBFC - WALL BRACKET FULL CANTILEVER TONS A C K H LB.

180° ROTATION 8' 2' 9" 14" 7" 245

FREE STANDING 360° ROTATION ®
10' 3' 0" 14" 7" 280
APPLICATION 12' 3' 9" 14" 7" 320
1/4 14' 4' 6" 15" 8" 420
OPTIONAL FEATURES A* 16' 5' 0" 17" 10" 610
When ceiling height is 18' 5' 9" 17" 10" 680
H
• Tagline a limitation, a WBFC 20' 6' 6" 17" 10" 750
• Festoon systems jib crane is the right
C ®
8' 2' 9" 14" 7" 245
• Collector ring assemblies answer. It can be
H 10' 3' 0" 15" 8" 320
• Motorized rotation mounted to a wall 12' 3' 9" 15" 8" 370
• Hand-geared rotation or column within 3 *“A” Dimension is from 1/2 14' 4' 6" 17" 10" 550
inches of the ceiling, face of mounting column to 16' 5' 0" 17" 10" 610
• Rotation stops 18' 835
providing valuable the tip of the boom. 5' 9" 19" 12"
• Air swivel 20' 6' 6" 19" 12" 920
• Special booms B additional inches of K
lifting range. Entirely 8' 2' 9" 15" 8" 275
self-supporting, 10' 3' 0" 17" 10" 410
12' 3' 9" 17" 10" 480
without tie rods or
other bracing, the jib crane can be installed with the 1 14' 4' 6" 19" 12" 665
16' 5' 3" 19" 12" 755
T (Dia.)
girder at maximum available height and with little or practically 18' 6' 0" 22" 15" 1100
no clearance necessary. 20' 6' 6" 22" 15" 1205

8' 2' 10" 20" 10" 435

Ground or floor level The steel hinge assemblies are equipped with tapered roller 10' 3' 3" 22" 12" 585
Pillar imbedded in concrete bearings fitted into precision-machined steel housings. Grease 12' 4' 0" 22" 12" 650
S 14' 960
fittings are provided for pressure lubrication to assure easy 2 4' 9" 25" 15"
16' 5' 6" 28" 18" 1315
movement.
18' 6' 3" 28" 18" 1465
20' 7' 0" 28": 18" 1615
Complete unit includes beam and mast assembly, fittings, end
stops, and hardware to assemble fittings and end stops. 8' 3' 0" 22" 12" 505
10' 3' 9" 25" 15" 750
12' 4' 6" 25" 15" 865
The strength and vertical alignment of the mounting must 3 14' 5' 6" 28" 18" 1205
be verified. Bushman accepts no responsibility for the 16' 6' 3" 28" 18" 1355
Split collar 18' 1850
(Field weld) structural integrity of any walls or members to which jib 7' 3" 30" 20"
20' 8" 0" 30" 20" 2030
cranes are attached.
PILLAR EXTENSION NOTE: For sizes not shown in chart, consult factory.
NOTE: Mounting bolts for attaching hinge fittings to wall or
Pillar column are not included.
Dia. “T” Dim. “S”
Brake
Gear
8" 3'-0" MOTORIZATION UNIT USED ON reducer
motor
Control box
MODELS 481 AND 486
10", 12", 14" 3'-6"
Wall or column-mounted 481
Pillar
centering and 486 models are frequently Safety
16", 18" 4'-0" clutch
pin motorized. An illustration of the
Top view Wall or
motorizaiton unit as adapted to Gears
20" 4'-6" column
the beams for these units is
shown here. The same general
24" 5'-0"
features as described
for the M480 (page 3) are Special
mounting
Insert sleeve incorporated into other bracket
motorized jibs.
Beam

6 11 E Q U I P M E N T , I N C .®
P.O. Box 309 • Butler, WI 53007-0309
262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com
 * MTG. BEAM
CAPACITY SPAN CENTER SIZE WEIGHT
MODEL 481-WCM JIB CRANES TONS A C K H LB.
MODEL 480-CBM — CONCRETE-BASE-MOUNTED SPECIFICATIONS
8' 2' 9" 2' 0" 6" 215
481-WCM - WALL OR COLUMN-MOUNTED 10' 3' 0" 2' 6" 6" 250
180° ROTATION 12' 3' 6" 3' 0" 6" 280 8 FOOT SPAN “A” 10 FOOT SPAN “A” 12 FOOT SPAN “A” 14 FOOT SPAN “A”
1/4 14' 4' 3" 3' 6" 6" 315
CAPACITY B H WT H T WT H WT H T WT
16' 5' 0" 4' 0" 6" 345 T T
APPLICATION 18' 5' 6" 4' 6" 6" 375 TONS HEIGHT BEAM PILLAR LB. BEAM PILLAR LB. BEAM PILLAR LB. BEAM PILLAR LB.
20' 6' 0" 5' 0" 7" 460
8' 6 6 583 7 6 622 7 8 757 8 8 835
The economical Model 8' 2' 9" 2' 0" 6" 215 10' 6 6 620 7 8 776 7 8 807 8 10 1045
481 - WCM jib cranes 10' 3' 0" 2' 6" 6" 250 12' 6 6 659 7 8 825 7 10 1077 8 10 1108
C 12' 3' 6" 3' 0" 6" 280 1/4 14' 7 6 705 7 8 875 7 10 1140 8 10
are designed for 1120
14' 4' 3" 3' 6" 7" 350
mounting on walls or
1/2 16' 5' 0" 4' 0" 7" 385
16' 7 8 894 7 8 924 7 10 1202 8 10 1233
H 18' 4' 6" 18' 7 8 943 7 8 974 7 10 1264 8 10 1295
K 5' 6" 8" 475
columns for coverage 20' 6' 6" 5' 0" 8" 520 20' 7 8 992 7 8 1023 7 10 1327 10 10 1521
over a 180° arc. They
can be used under an 8' 2' 9" 2' 0" 7" 235 8' 7 8 696 8 8 811 8 10 994 10 10 1146
10' 3' 0" 2' 6" 7" 275 10' 7 8 745 8 8 860 8 10 1057 10 10 1209
overhead bridge crane 12' 3' 6" 3' 0" 7" 310 12' 7 8 795 8 10 1082 10 10 1220 10 12 1582
if adequate overhead 14' 4' 3" 3' 6" 7" 350 14' 7 8 844 8 10 1145 10 10 1283 10 12
®
1 16' 5' 0" 4' 0" 8" 435 1/2 8 1207
1669
room is provided. 18' 5' 6" 4' 6" 8" 475
16' 7 10 1141 10 10 12 1345 10 12 1758
A* 20' 18' 7 10 1203 8 10 1269 10 12 1794 10 12 1845
6' 6" 5' 0" 10" 660
20' 7 10 1266 8 10 1332 10 12 1881 10 12 1933
The steel hinge *“A” Dimension is from
face of mounting 8' 2' 10" 2' 0" 10" 430
assemblies are column to the tip of the boom. 10' 3' 3" 2' 6" 10" 495 8' 8 10 921 10 10 1045 10 12 1356 12 12 1506
equipped with tapered 12' 4' 0" 3' 0" 10" 560 10' 8 10 983 10 10 1107 10 12 1444 12 12 1594
14' 4' 9" 3' 6" 10" 625 12' 10 10 1119 10 12 1480 12 12 1617 12 14 1927
roller bearings fitted 2 16' 5' 6" 4' 0" 10" 690 1 10 1568
14' 10 10 1181 12 12 12 1705 12 14 2036
into precision-machined steel housings. Grease fittings are 18' 6' 3" 4' 6" 12" 870 16' 10 10 1244 10 12 1655 12 12 1793 15 14 2145
20' 7' 0" 5' 0" 12" 945
provided for pressure lubrication to assure easy movement. 18' 10 12 1692 10 12 1743 12 14 2191 15 14 2432
8' 2' 0" 20' 10 12 1780 12 12 1904 12 14 2300 15 14 2541
3' 0" 10" 430
Complete unit includes upper and lower hinge fittings, beams 10' 3' 9" 2' 6" 10" 500
12' 4' 6" 3' 0" 10" 565 8' 10 10 994 10 12 1305 12 12 1442 15 14 1886
with tie rod bracket, tie rod, two end stops and assorted 14' 5' 6" 3' 6" 10" 630 10' 10 10 1056 10 12 1393 12 12 1530 15 14 1995
hardware. 3 16' 6' 3" 4' 0" 12" 790 12' 10 12 1429 12 12 1554 12 14 1863 15 14 2104
18' 7' 3" 4' 6" 12" 870 1-1/2 14' 10 12 1517 12 12 1641 12 14 1973 15 14 2213
20' 8' 0" 5' 0" 12" 1160 16' 10 12 1605 12 14 2018 15 14 2237 15 16 2872
The strength and vertical alignment of the mounting must 18' 10 12 1692 12 14 2127 15 16 2346 15 16 2997
be verified. Bushman accepts no responsibility for the 8' 3' 6" 2' 0" 10" 590
10' 20' 12 12 1840 12 14 2236 15 16 3037 15 16 3123
4' 6" 2' 6" 10" 650
structural integrity of any walls or members to which jib 12' 6' 0" 3' 0" 12" 805
cranes are attached. 14' 7' 0" 3' 6" 12" 890 8' 10 12 1254 12 12 1379 12 14 1645 15 14 1886
5 16' 8' 0" 4' 0" 15" 1145 10' 10 12 1342 12 12 1466 15 14 1909 15 14 1995
18' 9' 0" 4' 6" 15" 1250 12' 10 12 1429 12 14 1800 15 14 2018 15 16 2622
NOTE: Mounting bolts for attaching hinge fittings to wall or 20' 10' 0" 5' 0" 15" 1360 14' 12 12 1578 12 14 1909 15 14 2128 15 16 2747
column are not included.
2 16' 12 12 1665 15 14 2151 15 16 2786 15 18 3371
NOTE: For sizes not shown in chart, consult factory. 18' 12 14 2064 15 14 2260 15 16 2912 15 18 3513
20' 12 14 2172 15 14 2369 15 16 3037 15 18 3654

WALL OR COLUMN-MOUNTED JIB CRANE FITTINGS 8' 12 12 1315 15 12 1509 15 16 2286 18 16 2581
10' 12 12 1403 15 14 1823 15 16 2411 18 16 2707
For capacities through 10,000 lbs., these fittings provide the highest quality jib cranes available at a very economical price. 12' 12 12 1490 15 14 1933 15 16 2536 18 16 2832
3 14' 12 14 1845 15 16 2575 18 16 2847 18 18 3433
FOR USE ON TIE ROD TYPE OR FULL CANTILEVER TYPE JIBS 16' 12 14 1955 15 16 2701 18 16 2973 18 20 4273
Check These Special Features* TOP & BOTTOM WALL BRACKET MOUNTING HOLE PATTERNS 18' 15 14 2174 15 16 2826 18 18 3606 18 20 4481
20' 15 14 2283 15 16 2951 18 18 3747 18 20 4689
Machined 13/16" Drill, 6 Holes 1-1/16" Drill, 6 Holes 1-5/16" Drill, 8 Holes
Formed steel Bearing,
steel
tapered 8' 15 16 2114 18 18 2791 18 18 2900 20 18 3190
housing
roller 10' 15 16 2240 18 18 2932 18 18 3041 20 20 4057
13/4" 13/4"

41/2"
5"
61/2"

12' 15 16 2365 18 18 3073 18 20 3924 20 20 4265

12"

Cold 5 14' 15 16 2490 18 18 3214 18 20 3932 20 20 5226

5"

4"

16"

finished pin 16' 15 18 2615 18 18 3355 18 20 4141 20 24 5476

3
1
4 / 2" 18' 15 18 3255 18 18 3497 18 24 4758 20 24 5727
/ 4"
1 1/ 2"

41/2"

6" 5 1/ 2" 20' 15 18 3396 18 20 4425 18 24 4967 20 24 5978

1 1/ 4"
1"

Formed Steel
8"
"1 Pressure
5 1/ 2"
Steel washer lubrication fitting 1 3/ 4"
1 1/ 2"

CAPACITY CAPACITY 9" CAPACITY NOTE: For sizes not shown in chart, consult factory.
Bearing, 500 lbs. to 4,000 lbs. Over 6,000 lbs.
tapered roller
Cotter Pin 3,000 lbs. to 6,000 lbs. to 10,000 lbs.

* Slight modifications for capacities over 3,000 lbs.

10 7
E Q U I P M E N T , I N C .®
P.O. Box 309 • Butler, WI 53007-0309
262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com
 A

MODEL 480-LD (LIGHT DUTY) JIB CRANES

MODEL 480-CBM — CONCRETE-BASE-MOUNTED SPECIFICATIONS H
3 CAPACITIES - 100, 250 and 500 lbs.
16 FOOT SPAN “A” 18 FOOT SPAN “A” 20 FOOT SPAN “A”
SELF-SUPPORTING - 360° ROTATION
CAPACITY B H T WT H T WT H T WT
TONS HEIGHT BEAM PILLAR LB. BEAM PILLAR LB. BEAM PILLAR LB.
Ideal for machine shops, pattern shops, tool and die shops, die
8' 8 10 1014 10 10 1298 10 10 1299 casting and stamping plants - any place light lifts are made.
10' 8 10 1076 10 10 1310 10 12 1647 15" square base plate
12' 10 10 1322 10 10 1373 10 12 1734 T (standard)
1/4 14' 10 10 1384 10 10 1435 10 12 1822 FEATURES: AVAILABLE OPTIONS: B
16' 10 10 1447 10 12 1859 10 12 1909 • 360° rotation • Tagline festoon (4) 15/16" dia. holes @
18' 10 10 1509 10 12 1946 12 12 2135 • Standard I-beam • Rotation stops 12" square hole pattern.
20' 10 10 1572 10 12 2034 12 12 2222 • Sturdy pipe pillar • Top entry collector assembly
8' 10 12 1458 12 12 1633 12 12 1697 • Solid base plate
10' 10 12 1545 12 12 1721 15 12 2026 • Full gussets
12' 10 12 1633 12 12 1808 15 12 2114 • Thrust bearing with pintle pin at top SPAN 6' “A” SPAN 8' “A” SPAN 10' “A”
14' 12 12 1832 12 14 2163 15 14 2471
1/2 16' 12 14 14
• Cam rollers with sealed bearings at bottom of head Capacity Height WT WT WT
12 12 1920 2273 15 2580 Lb. B H T LB. H T LB. H T LB.
18' 12 12 2007 12 14 2382 15 14 2689
20' 12 12 2095 12 14 2491 15 14 2798 The Model 480-LD is factory assembled to assure 6' 4" 5" 227 4" 5" 292 4" 5" 307
proper alignment. For shipping purposes the crane is 100 8' 4" 5" 307 4" 5" 321 4" 5" 336
8' 12 14 1772 15 14 2058 15 14 2143 10' 4" 5" 337 4" 5" 351 4" 5" 366
10' 15 14 2081 15 14 2167 15 16 2734
disassembled into three main sections: beam assembly,
12' 15 14 2190 15 16 2276 15 16 2879 head assembly, and pillar assembly. The necessary 6' 4" 5" 277 5" 5" 312 6" 5" 365
1 14' 15 14 2249 15 16 2919 18 16 3285 hardware is furnished for easy field erection of these 250 8' 4" 5" 307 5" 5" 338 6" 5" 394
16' 14 15 16 3044 16 3410 10' 4" 5" 337 5" 5" 371 6" 5" 424
15 2408 18 three main sections. Note: Mounting bolts are optional.
18' 15 16 3083 15 16 3169 18 16 3535
6' 5" 5" 292 6" 5" 333 7" 5" 425
20' 15 16 3208 18 16 3551 18 18 4185
Floor-plate-mounted model is shown. For CBM 500 8' 5" 5" 321 6" 5" 362 7" 5" 467
10' 5" 5" 351 6" 5" 452 8" 5" 508
8' 15 14 1972 18 16 2800 18 16 2910 concrete-base-mounted model consult factory.
10' 15 14 2081 18 16 2925 18 16 3035
12' 15 16 2708 18 16 3051 18 16 3160
1-1/2 14' 15 16 2833 18 16 3652 18 18 3761 CAP. SPAN W H *RODS CAP. SPAN W H *RODS
16' 15 18 3457 18 18 3793 18 18 3902 SUGGESTED FOUNDATION REQUIREMENTS
18' 15 18 3598 18 18 3934 18 20 4877 OF FLOOR-PLATE-MOUNTED CRANES 8' 4' 3' 4 8' 6' 3' 7
20' 15 18 3739 18 18 4075 18 20 5085 10' 4' 3' 4 10' 6' 3' 7
12' 4' 3' 4 12' 7' 3' 8
8' 15 18 2893 15 18 2978 18 18 3338 The size of the concrete foundation required to 1,000 14' 5' 3' 6 4,000 14' 7' 3' 8
10' 15 18 3034 18 18 3370 18 18 3479 support the desired jib crane may vary due to LB. 16' 5' 3' 6 LB. 16' 8' 3' 9
12' 18 18 20 18' 6' 3' 7 18' 8' 3' 9
15 18 3175 3511 18 4252 various existing floor conditions. The sizes shown 20' 6' 3' 7 20' 8' 6" 3' 9
14' 18 18 3543 18 20 4329 18 20 4460
2 are based on a soil pressure of 2500 lbs. per sq. ft. 22' 7' 4' 8 22' 9' 4' 10
16' 18 18 3684 18 20 4537 20 20 4974 4'
or more. If foundation is installed inside a reinforced 25' 7' 4' 8 25' 9' 6" 10
18' 18 18 3825 18 20 4745 20 24 6123
20' 18 20 4844 18 20 4953 20 24 6374 concrete floor, the size may be reduced (consult 10' 5' 4' 6 10' 7' 4' 8
your architect or engineer). 12' 6' 4' 7 12' 7' 4' 8
8' 18 18 3119 20 18 3454 24 20 4481 14' 6' 4' 7 14' 8' 4' 9
10' 18 18 3260 20 20 4217 24 20 4689 2,000 16' 7' 4' 8 6,000 16' 8' 4' 9
12' 20 20 4425 20 4897 LB. 18' 7' 4' 8 LB. 18' 9' 4' 10
18 20 3988 24
3 14' 18 20 20 20 4633 20 5105 20' 7' 6" 4' 8 20' 9' 4' 10
4196 24
22' 7' 6" 4' 8 22' 9' 6" 4' 10
16' 18 20 4405 20 20 4842 24 24 6184 5-6" Approx. * Rods in chart
25' 8' 4' 9 25' 10' 4' 11
18' 20 20 4918 20 24 5991 24 24 6434 indicate quantity in
20' 20 20 5126 20 24 6241 24 24 6685 each direction at 10' 6' 4' 7 10' 8' 4' 9
top and bottom. 12' 6' 4' 7 12' 8' 4' 9
8' 24 20 4161 24 20 4321 24 24 5382 “H” 14' 7' 4' 8 14' 9' 4' 10
10' 24 20 4369 24 20 4529 24 24 5632 Reinforcing Rods: 3,000 16' 7' 4' 8 10,000 16' 9' 4' 10
12' 24 24 5563 24 24 5723 24 24 5883 5/8" Dia. @ top LB. 18' 8' 4' 8 LB. 18' 10' 4' 11
14' 24 24 5813 24 24 5973 24 24 7543 3/4" Dia. @ bottom 20' 8' 4' 8 20' 10' 4' 11
5 16' 24 24 24 22' 9' 4' 10 22' 10' 6" 4' 11
24 24 6064 6224 24 7885 Approximately
25' 9' 4' 10 25' 11' 4' 12
18' 24 24 6314 24 24 7517 24 30 10073 10" centers in
20' 24 24 6565 24 24 7860 24 30 10535 “W” Sq both directions. Note: These dimensions are suggested recommendations only and must not be construed as
certified foundation requirements. For foundation size of CBM (Concrete-Base-Mounted) units:
1. Determine Dim. “S” as shown on page 6 of this catalog.
NOTE: For sizes not shown in chart, consult factory. 2. Foundation should be one (1) foot deeper than “S” dim.
3. Total volume of concrete should be equal to that of foundation for comparable FPM model
as shown.

8 9
E Q U I P M E N T , I N C .®
P.O. Box 309 • Butler, WI 53007-0309
262-790-4200 • Fax 262-790-4202
E-Mail: custinfo@bushman.com • www.bushman.com