RR 5700

SERIES
Specifications
Narrow-Aisle Reach Truck
 RR 5700 Series Narrow-Aisle
Reach Truck

4" (102 mm)

42" 9" ( 230 mm) 20

(1065mm)
4" (102 mm)

*5.5" **4.25"
(140 mm) *35/40 - 5.5" (140 mm) (110 mm)
45 - 6" (150 mm)
1.8" (45 mm) Standard third post
4.1" (105 mm) Optional Drive-in rack third post 27" (685 mm) or 30" (760 mm)
0 mm)
30.9" or 33.9"
(785 mm or 860 mm)

48"
36" (1220 mm)
(915 mm)
34.5"
(875 mm) 14

15 23.3" 13
(590 mm)

8.75"
(220 mm) ***

41"
18 (1040 mm)
8"
9 (205 mm)
4.63" 4.63"
1.0" (120 mm) 1.0" (120 mm) ††
(25 mm) (25 mm)

10 31"
2 ø 4 x 4.1" 2 ø 4 x 2.9 (785 mm)
17 (100 x 105 mm) (100 x 75 mm)
6.75" 6.75"
2.0" (170 mm) 2.0" (170 mm)
(50 mm) (50 mm)

2 ø 6 x 4.1"
57.50"
2 ø 6 x 2.9" (1460 mm)
(150 x 105 mm) (150 x 75 mm)
5.25"
5.75" (133 mm) 5.75"
(145 mm)
7.13" 2.0"† (145 mm) 2.0" 2.0"†
(180 mm) (50 mm)† (50 mm) (50 mm)†

9.4" 2 ø 5 x 4.1"
(240 mm) 37 (125 x 105 mm) 2 ø 5 x 2.9"
10.4"
38 38 38 (125 x 75 mm)
(265 mm) ø 10.5 x 4"- 35/40
(265 x 100 mm)
ø 10.5 x 4.5" - 45
(265 x 115 mm)
* 5.86" (150 mm) with Quick Change Load Wheels
** 4.6" (120 mm) with Quick Change Load Wheels
*** Top tie bar width- 33" (835 mm) for 240" (6095 mm) or 270" (6860 mm) lift. 35" (900 mm) for 300" (7620 mm) and above.
† 1" (25 mm) on lift heights above 321" (8150 mm)
†† Standard third post location, refer to dimension in top view.
 RR 5700 Series Specifications

Imperial Metric Imperial Metric

1 Manufacturer Crown Equipment Corporation
General Information

2 Model RR 5715-35 RR 5715-40

3 Load Capacity* Max lb kg 3500 1585 4000 1810
4 Load Center Fork Face to Load CG in mm 24 600 24 600
5 Power 24 Volts
6 Operator Type Reach Stand
7 Tire Type Load/Caster/Drive Poly / Poly / Poly
8 Wheels (x = driven) Load/Power Unit 4 / 2 (1x)
Mast Type High Visibility TT
9 Lift Height in mm See Mast Chart
10 Guard Height in mm See Mast Chart
13 Forks Standard L x W x T in mm 36 x 4 x 1.75 915 x 102 x 45
Optional Lengths in mm 30, 39, 42, 45, 48 760, 990, 1065, 1145, 1220
Dimensions

14 Carriage Tilt F°/B° degree 3/4

15 Headlength Comp’t “B” in mm 51.25 1300 51.25 1300
Comp’t “C” in mm 53.25 1355 53.25 1355
Comp’t “D” in mm na na na na
Comp’t “E” in mm na na na na
17 Overall Collapsed Ht. in mm See Mast Chart
18 Overall Extended Ht. in mm See Mast Chart
20 Inside Straddle Width** In 1" (25 mm) increments in mm 34 - 50 860 - 1270 34 - 50 860 - 1270
24 Speed Travel Power Unit First (E/L) mph kph 7.2 / 6.3 11.6 / 10.1 7.2 / 6.3 11.6 / 10.1
Forks First (E/L) mph kph 6.3 / 5.7 10.1 / 9.2 6.3 / 5.3 10.1 / 8.5
25 Speed Lift - DC† Empty fpm mm/s 54 270 54 270
1000 lb (455 kg) fpm mm/s 46 230 46 230
2000 lb (910 kg) fpm mm/s 40 200 40 200
3000 lb (1365 kg) fpm mm/s 35 175 35 175
3500 lb (1590 kg) fpm mm/s 33 165 33 165
Performance

4000 lb (1815 kg) fpm mm/s na na 31 155

4500 lb (2000 kg) fpm mm/s na na na na
25a Speed Lift - AC† Empty fpm mm/s na na na na
1000 lb (455 kg) fpm mm/s na na na na
2000 lb (910 kg) fpm mm/s na na na na
3000 lb (1365 kg) fpm mm/s na na na na
3500 lb (1590 kg) fpm mm/s na na na na
4000 lb (1815 kg) fpm mm/s na na na na
4500 lb (2000 kg) fpm mm/s na na na na
26 Speed Lower Empty/Loaded fpm mm/s 110 / 110 555 / 555 110 / 110 555 / 555
37 Tires Size - Drive/Caster in mm 13 x 5.5 / 8 x 4 330x140 / 203x102 13 x 5.5 / 8 x 4 330x140 / 203x102
38 Wheelbase Comp’t “B” in mm 54.24 1380 54.24 1380
(Standard Wheel) Comp’t “C” in mm 56.24 1430 56.24 1430
Comp’t “D” in mm na na na na
Comp’t “E” in mm na na na na
Chassis

39 Suspension Drive Articulated

Caster Articulated, Swivel
42 Brakes Drive Elec Release / Mech Applied
Caster None
Parking Elec Release / Mech Applied
Battery Removal Both Sides
45 Type Lead Acid
46 Min Weight/Max Amp Comp’t “B” lb/amp kg/amp 1600 / 1085 730 / 1085 1600 / 1085 725 / 1085
Comp’t “C” lb/amp kg/amp 1880 / 1020 855 / 1020 1880 / 1020 855 / 1020
Comp’t “D” lb/amp kg/amp na na na na
Battery

Comp’t “E” lb/amp kg/amp na na na na

Max Battery Size Comp’t “B” L x W x H in mm 38.38 x 14.25 x 31 975 x 360 x 787 38.38 x 14.25 x 31 975 x 360 x 787
Width is measured Comp’t “C” L x W x H in mm 38.38 x 16.25 x 31 975 x 415 x 787 38.38 x 16.25 x 31 975 x 415 x 787
on the side of Comp’t “D” L x W x H in mm na na na na
the battery Comp’t “E” L x W x H in mm na na na na
with lifting Connector Loc/Length (J) in mm A/9
hooks.
Standard Connector SB350 Red
* Contact factory. Capacity may be subject to derating at height.
** Inside straddle is decreased .35" (10 mm) with Quick Change Load Wheels.
† Maximum lift speeds with the maximum available battery compartment.
 RR 5700 Series Specifications

Imperial Metric Imperial Metric

1 Manufacturer Crown Equipment Corporation
General Information

2 Model RR 5725-35 RR 5725-45

3 Load Capacity* Max lb kg 3500 1585 4500 2000
4 Load Center Fork Face to Load CG in mm 24 600 24 600
5 Power 36 Volts
6 Operator Type Reach Stand
7 Tire Type Load/Caster/Drive Poly / Poly / Poly
8 Wheels (x = driven) Load/Power Unit 4 / 2 (1x)
Mast Type High Visibility TT
9 Lift Height in mm See Mast Chart
10 Guard Height in mm See Mast Chart
13 Forks Standard L x W x T in mm 36 x 4 x 1.75 915 x 102 x 45
Optional Lengths in mm 30, 39, 42, 45, 48 760, 990, 1065, 1145, 1220
Dimensions

14 Carriage Tilt F°/B° degree 3/4

15 Headlength Comp’t “B” in mm 51.25 1300 na na
Comp’t “C” in mm 53.25 1355 53.67 1365
Comp’t “D” in mm na na 55.42 1410
Comp’t “E” in mm na na 58.04 1475
17 Overall Collapsed Ht. in mm See Mast Chart
18 Overall Extended Ht. in mm See Mast Chart
20 Inside Straddle Width** In 1" (25 mm) increments in mm 34 - 50 860 - 1270 34 - 50 860 - 1270
24 Speed Travel Power Unit First (E/L) mph kph 8.0 / 7.2 12.9 / 11.6 8.0 / 7.2 12.9 / 11.6
Forks First (E/L) mph kph 6.8 / 5.7 10.9 / 9.2 6.8 / 5.7 10.9 / 9.2
25 Speed Lift - AC† Empty fpm mm/s 158 800 153 775
1000 lb (455 kg) fpm mm/s 138 700 139 707
Performance

2000 lb (910 kg) fpm mm/s 118 600 121 615

3000 lb (1365 kg) fpm mm/s 101 510 105 530
3500 lb (1590 kg) fpm mm/s 94 475 97 490
4000 lb (1815 kg) fpm mm/s na na 90 455
4500 lb (2000 kg) fpm mm/s na na 82 415
26 Speed Lower Empty/Loaded fpm mm/s 110 / 110 555 / 555 110 / 110 555 / 555
37 Tires Size - Drive/Caster in mm 13 x 5.5 / 8 x 4 330x140 / 203x102 13 x 5.5 / 8 x 4 330x140 / 203x102
38 Wheelbase Comp’t “B” in mm 54.24 1380 na na
(Standard Wheel) Comp’t “C” in mm 56.24 1430 58.32 1480
Comp’t “D” in mm na na 60.07 1525
Comp’t “E” in mm na na 62.70 1595
Chassis

39 Suspension Drive Articulated

Caster Articulated, Swivel
42 Brakes Drive Elec Release / Mech Applied
Caster None
Parking Elec Release / Mech Applied
Battery Removal Both Sides
45 Type Lead Acid
46 Min Weight/Max Amp Comp’t “C” lb/amp kg/amp 1880 / 930 855 / 930 2000 / 930 910 / 930
Comp’t “D” lb/amp kg/amp na na 2280 / 1085 1035 / 1085
Battery

Comp’t “E” lb/amp kg/amp na na 2600 / 1240 1180 / 1240

Max Battery Size Comp’t “C” L x W x H in mm 38.38 x 16.25 x 31 975 x 415 x 787 38.38 x 16.25 x 31 975 x 415 x 787
Width is measured Comp’t “D” L x W x H in mm na na 38.69 x 18.00 x 31 983 x 455 x 787
on the side of Comp’t “E” L x W x H in mm na na 38.69 x 20.75 x 31 983 x 525 x 787
the battery
with lifting Connector Loc/Length (J) in mm A/9
hooks.
Standard Connector SB350 Gray

* Contact factory. Capacity may be subject to derating at height.

** Inside straddle is decreased .35" (10 mm) with Quick Change Load Wheels.
† Maximum lift speeds with the maximum available battery compartment.
 RR 5700 Series Specifications

Models RR 5715-35, 5715-40, 5725-35 and 5725-45 TT

9 Lift Height (RR 5715-35 and -40, 270" Max) in mm 198 5025 210 5330 240 6095 270 6855 300 7620
Free Lift* in mm 41 1040 47 1190 59 1495 71 1800 83 2105
10 Guard Height in mm 89 2260 95 2415 95 2415 95 2415 95 2415
Mast

17 Overall Collapsed Height in mm 89 2265 95 2415 107 2720 119 3025 131 3330
18 Overall Extended Height* in mm 246 6250 258 6555 288 7315 318 8080 348 8840
Minimum Straddle OD in mm 42 1065 42 1065 42 1065 42 1065 42 1065
Battery
Truck Weight w/o Battery Compartment
RR 5715-35 “B” lb kg 5147 2340 5233 2380 5492 2495 na na na na
RR 5715-40 “C” lb kg 5191 2360 5227 2375 5536 2515 5779 2625 na na
Weight

RR 5725-35 “C” lb kg 5269 2395 5355 2435 5614 2550 5857 2660 6029 2740
“C” lb kg 5653 2570 5762 2620 6075 2760 6365 2895 6872 3125
RR 5725-45 “D” lb kg 5695 2590 5804 2640 6117 2780 6407 2910 6914 3145
“E” lb kg 5750 2615 5859 2665 6172 2805 6462 2935 6969 3170

Model RR 5725-45 TT
9 Lift Height (RR 5715-35 and -40, 270" Max) in mm 321 8150 341 8660 366 9295 400 10160
Free Lift* in mm 92 2335 101 2565 112 2845 124 3150
10 Guard Height in mm 95 2415 95 2415 95 2415 95 2415
Mast

17 Overall Collapsed Height in mm 140 3560 149 3785 160 4060 172 4365
18 Overall Extended Height* in mm 369 9375 389 9885 414 10520 448 11380
Minimum Straddle OD in mm 42 1065 49 1245 50 1270 53 1345
Battery
Truck Weight w/o Battery Compartment
Weight

“C” lb kg 7048 3205 na na na na na na

RR 5725-45 “D” lb kg 7090 3225 7341 3335 na na na na
“E” lb kg 7145 3250 7396 3360 7612 3460 7846 3565

* With load backrest.

Note: Above 321" (8150 mm), 6" (150 mm) high load wheel standard.
 RR 5700 Series Technical Information

Capacity 11. Overhead guard 22. Fan Operator visibility is improved with:
Model RR 5715-35: 3500 lb (1585 kg) 12. 48" (1220 mm) high 23. Corrosion/freezer conditioning • Low profile power unit
at 24" (600 mm) load center, 24 volt load backrest (freezer conditioning includes a • High visibility mast
Model RR 5715-40: 4000 lb (1810 kg) 13. Crown-manufactured side- 5/8" (16 mm) thick power unit
at 24" (600 mm) load center, 24 volt skirt with extended coverage of • Angled mast cross bracing
shifter, 2" - 4" (50 - 100 mm)
each way the drive and caster tires) • Angled overhead guard
Model RR 5725-35: 3500 lb (1585 kg)
24. ThermoAssist™ freezer cross bars
at 24" (600 mm) load center, 36 volt 14. Tilting fork carriage
comfort package • Variable side stance
Model RR 5725-45: 4500 lb (2000 kg) 15. Tandem articulating (“C”, “D” or “E” battery
at 24" (600 mm) load center, 36 volt load wheels Superior thermal management is
compartment)
the result of several design features:
Batteries 16. Lift slow down 12" (305 mm) 25. Load wheel sizes reduced heat generating compo-
Battery removal from left or right from maximum lift height and compounds nents, positioning of heat generating
side of truck. Standard battery 17. Lift Limit without override components away from the
compartment rollers for extraction 26. UL EE Rating
18. Crown-manufactured drive and compartment, padding to insulate
with mechanized equipment. 27. Forward Steering
lift motors the compartment from heat,
Standard Equipment 28. Work Assist® Accessories: and improved air paths through
19. Offset articulated drive axle
1. Crown’s Access 1 2 3® • Accessory tube the truck.
with 190º steer arc
Comprehensive • Accessory RF Clipboard surface and console
System Control 20. Key switch mounting plate storage pockets are standard.
2. 24 or 36 volt system 21. Horn • Accessory RF Crown’s Access 1 2 3®
3. AC Traction System 22. Emergency power mounting bracket Comprehensive System
disconnect • Accessory clamp Control provides optimum
4. AC Hydraulics with electronic
power steering 23. 350 amp battery connector • Accessory clip pad performance and control by
24. Large diameter battery rollers • Accessory hook offering a communication interface
(RR 5715 has DC Hydraulics
for operators and technicians,
with hydrostatic power 25. Color-coded wiring • Accessory clip pad
intelligent coordination of lift truck
steering) and hook
26. Third post systems and simplified service
5. OnTrac® Anti-Slip • Accessory pocket with advanced diagnostics.
27. Reverse steering
Traction Control 29. InfoLink® Ready System The Crown display is used for easy
6. Operator Compartment 28. InfoPoint® System with Quick
30. InfoLink for Windows® trouble shooting, accessing service
Reference Guide
• Variable side stance Ready System history and setting performance
29. Static Strap features. A distribution panel is con-
• Flexible five-point Operator Compartment
Optional Equipment veniently located with all test points,
positioning Soft, rounded surfaces make
1. Rack Height Select and control fuses and central wiring for
• Back support with integral hip compartment interior more
Tilt Position Assist easy troubleshooting.
support comfortable. Streamlined
2. Capacity monitor exterior smooths entry/exit for Three modes of performance
• Arm/elbow support padding the operator. A low floor height, can be selected to accommodate
3. Camera and color monitor
• Padded compartment (9.4" (240 mm)), first greets the operator experience or application
(Not available on 5715)
interior walls operator. A 270 in2 (1768 cm2) floor requirements.
4. Mast lift heights to 400" and patented suspended floor-
• Operator console with work OnTrac® Anti-Slip
(10160 mm) board provide comfortable footing.
surface and storage Traction Control
5. Lift limit with override The brake pedal design allows Crown's Access 1 2 3 technology
• Suspended floor
6. Drive-in rack variable side-stance positions for monitors truck dynamics, optimizes
• 270 in2 (1768 cm2) floor area) the operator. The operator can traction, reduces spinning during
cylinder package
• Entry bar change positions to increase acceleration, prevents lock-up
7. Drive-in rack mast (4500 lb during braking, and greatly
• Premium urethane comfort and productivity.
(2000 kg) only) extends tire life.
floorboard cushion Five-point positioning provides
8. Drive-in rack third post
• Console light control and stability, starting with Travel
9. Chain slack kit the right hand on the multi-task Crown’s AC traction system is a
7. Multi-task control handle controller and the left hand on the closed loop traction control system
10. Bolt-on outrigger tips
8. Crown display steer tiller. Left foot on the brake that maintains top speed through-
11. Quick Change bolt-on out the battery charge. Engineered
• Event code display with five pedal and the right foot on the
outrigger tips and manufactured by Crown, the
(5) key navigation. presence sensor. The operator’s
12. Mesh screen mast guard back is naturally fitted against the AC motor, controller and drive unit
• Hour meters / travel wrap-around support cushion. are designed specifically for lift truck
13. Battery retainer with interlock
distance / stop watch applications.
14. 5th battery compartment roller An entry bar with sensors to
• PIN Code access capable automatically slow truck travel, On an inclined surface or when
15. 36" and 42" (915-1065 mm) interfacing with push-back
• Access 1 2 3 diagnostics encourages safe foot positioning
high load backrests racking, the “truck hold” feature
• P1, P2, P3 performance inside the truck.
16. Overhead guard mesh electronically brakes the truck
tuning The multi-task control enables the when the handle is in neutral. The
17. Polished and tapered forks operator to maneuver the truck
• Battery discharge indicator, operator does not have to release
steer wheel direction indica- 18. Fork lengths while blending lift and accessory the brake pedal, improving comfort
tor, OnTrac Traction Control functions for improved productivity. and control in these applications.
19. Work lights
indicator Control handle activation forces are Selected travel speed remains con-
20. LED flashing light reduced. The soft grip steer tiller stant regardless of surfaces, load
9. High visibility power unit with hydrostatic steering or optional
21. Keyless on/off switch weight or grades. Less throttling of
10. High visibility mast electronic power steering reduces control handle means better truck
operator fatigue. control and less fatigue to
the operator.
 RR 5700 Series Technical Information

Steering Suspension Mast Warning Device Options

The electronic power steering uses The offset, articulated drive-unit High visibility mast design with Audible or Visual Alerts
an AC steer motor and steering design provides positive floor angled cross bracing and angled Safety considerations and
control module integrated with the contact. overhead guard braces improve dangers associated with
Access 1 2 3® System to provide Load Handling visibility for high or low stacking. audible travel alarms and
fast, reliable steering response. The optional load handling assist Crown’s patented staging lights include:
(RR 5715 has the load sense package provides rack height select cushions coupled with lowering
hydrostatic steering that is an dampers and speed reductions • Multiple alarms and/or lights
and tilt position assist features.
on-demand system which at maximum lift improve overall can cause confusion.
reduces energy consumption.) The Rack Height Select feature load handling control. • Workers ignore the alarms
allows the truck to be programmed and/or lights after day-in and
Smooth, quiet steering control to stop at preselected heights. Rolled steel outer channel masts
with minimal operator effort and inner “I” beams roll on day-out exposure.
With one-touch of the multi-task
required at the steer tiller. Drive trigger while lifting or lowering, canted, steel, anti-friction roller • Operator may transfer the
tire rotates 190° for maximum the mast will stop at the next bearings for minimal current draw responsibility for “looking out”
maneuverability. programmed height. and long life. Telescoping mast to the pedestrians.
sections nest to reduce truck
Braking • Annoys operators and
Another useful option is the length. Heavier mast cross
A disc brake on the motor Tilt Position Assist. This allows the pedestrians.
bracing design increases stiffness.
armature shaft combined with fork tilt to stop at a preprogrammed Other Options Available
Above 270" (6860 mm) lift, vertical
motor regenerative braking position for maximum fork clear- Contact factory for additional
mast reinforcement maintains
provides sure braking with fewer ance when entering pallets. options.
maximum capacity.
parts and maintenance require-
ments. The offset, articulated Also optional, the Capacity Monitor Carriage Dimensions and performance
drive-unit design improves drive shows the approximate weight on the A hook-type carriage conforming data given may vary due to
tire brake force. forks and the fork height. It will alert to ITA specifications is used. Load manufacturing tolerances.
the operator when the truck capacity backrest is standard. Performance is based on an
Regenerative motor braking helps
is exceeded for the fork height. It will average size vehicle and is
save energy, and decreases motor
also show how high or to which lift affected by weight, condition
temperature.
zone you can raise the load. of truck, how it is equipped and
the conditions of the operating
area. Crown products and
specifications are subject to
change without notice.
 Crown Equipment Corporation
New Bremen, Ohio 45869 USA
Tel 419-629-2311
Fax 419-629-3796
crown.com

­You can count on Crown to build lift trucks Because Crown is continually improving its products,
specifications are subject to change without notice.
designed for safe operation, but that’s

only part of the safety equation. Crown Crown, the Crown logo, the color beige, the
Momentum mark, Access 1 2 3, InfoPoint, InfoLink,
encourages safe operating practices through ThermoAssist, OnTrac and Work Assist are trademarks
of Crown Equipment Corporation. Other trademarks are
ongoing operator training, safety-focused property of their owners.
supervision, maintenance and a safe working
Copyright 2009-2017 Crown Equipment Corporation
environment. Go to crown.com and view our SF18299 Rev. 05-17
Printed in U.S.A.
safety section to learn more.