Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    Entry Mark Form

    Uploaded by

    Miftahul Huda
    1. The document describes mechanical assembly and drawing criteria for manufacturing including part modeling, assembly modeling, dimensioning, and drawing views. 2. It also includes mechanical fabrication criteria such as sheet metal parts and assemblies, frame parts and assemblies, fabrication drawing details, and drawing views. 3. Finally, it outlines criteria for a mechanical design challenge involving 2D assembly views, isometric assembly views, detail drawings, and overall drawing views and presentation.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Entry Mark Form

    Uploaded by

    Miftahul Huda
    31 views6 pages
    1. The document describes mechanical assembly and drawing criteria for manufacturing including part modeling, assembly modeling, dimensioning, and drawing views. 2. It also includes mechanical fabrication criteria such as sheet metal parts and assemblies, frame parts and assemblies, fabrication drawing details, and drawing views. 3. Finally, it outlines criteria for a mechanical design challenge involving 2D assembly views, isometric assembly views, detail drawings, and overall drawing views and presentation.

    Original Description:

    aaz

    Original Title

    1.1

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document describes mechanical assembly and drawing criteria for manufacturing including part modeling, assembly modeling, dimensioning, and drawing views. 2. It also includes mechanical fabrication criteria such as sheet metal parts and assemblies, frame parts and assemblies, fabrication drawing details, and drawing views. 3. Finally, it outlines criteria for a mechanical design challenge involving 2D assembly views, isometric assembly views, detail drawings, and overall drawing views and presentation.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    31 views6 pages

    Entry Mark Form

    Uploaded by

    Miftahul Huda
    1. The document describes mechanical assembly and drawing criteria for manufacturing including part modeling, assembly modeling, dimensioning, and drawing views. 2. It also includes mechanical fabrication criteria such as sheet metal parts and assemblies, frame parts and assemblies, fabrication drawing details, and drawing views. 3. Finally, it outlines criteria for a mechanical design challenge involving 2D assembly views, isometric assembly views, detail drawings, and overall drawing views and presentation.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 6

    1.

    1 Mechanical Assemblies and Detail Drawing for Man item Max Mark Mark
    1.1.1 Part Modeling 6 10.00 10.00 -
    1.1.2 Assembly Modeling 3 14.00 14.00 -
    1.1.3 Dimensioning including GDT 3 10.00 10.00 -
    1.1.4 Drawing Views and Presentation 1 1.00 1.00 -
    13 35.00 35.00 -
    ENTRY MARK FORM

    Sub Aspect Req. No. Of Competitor


    Criteria Sub - Criteria Name or Description Type Aspect - Description or Nom. Weight
    ID O/ S Size 1 2 3 4 5 6 7 8 11 12 13 15 16 17 xx

    Mechanical Assemblies and Detail Drawing for


    1.1
    Manufacture

    1.1.1 Part Modeling


    Base Sub - Assy O 9 0.294
    Column Sub - Assy O 6 0.294
    Arm Sub - Assy O 5 0.294
    Wheel Sub - Assy O 6 0.294
    Hook Sub - Assy O 4 0.294
    Crane O 4 0.294
    34.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.1.2 Assembly Modeling
    Base Sub - Assy O 9 0.378
    Arm Sub - Assy O 5 0.378
    Crane Complete Assembly O 23 0.378
    37 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.1.3 Dimensioning including GDT
    Base Sub - Assy O 3 0.909
    Arm Sub - Assy O 3 0.909
    Crane Complete Assembly (2D) O 5 0.909
    11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.1.4 Drawing Views and Presentation
    View and Presentation S 1 1.000
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.2 Mechanical Fabrication item Max Mark Mark
    1.2.1 Sheet Metal Parts and Assemblies 4 5.00 5.00 -
    1.2.2 Frame Parts and Assemblies 6 5.00 5.00 -
    1.2.3 Fabrication Drawing Details 1 4.00 4.00 -
    1.2.4 Drawing Views and Presentation 1 1.00 1.00 -
    12 15.00 15.00 -
    ENTRY MARK FORM

    Sub Aspect Req. No. Of Competitor


    Criteria Sub - Criteria Name or Description Type Aspect - Description or Nom. Weight
    ID O/ S Size 1 2 3 4 5 6 7 8 11 12 13 15 16 17 XX

    1.2 Mechanical Fabrication


    1.2.1 Sheet Metal Parts and Assemblies Assembly Conveyor
    Sheet size O 3D Modeling 1.250
    Parallel Block O 3D Assembly 1.250
    Conveyor Sub Assy 1 O 3D Assembly 1.250
    Gripper Sub Assy O 3D Assembly 1.250
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.2.2 Frame Parts and Assemblies
    Frame Sub Assy O 3D Assembly 2.000
    Roller Sub Assy 1 O 3D Assembly 0.500
    Roller Sub Assy 2 O 3D Assembly 0.500
    Motor Sub Assy O 3D Exploded 0.500
    V-Belt Transmission O 3D Exploded 1.000
    Over All Assembly O 3D Assembly 0.500
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.2.3 Fabrication Drawing Details
    General dimension,
    Sliding Side O Bending angle and 4.000
    direction
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.2.4 Drawing Views and Presentation
    Simulation S 1.000
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.3 Mechanical Design Challenge item Max Mark Mark
    1.3.1 2D Assembly Views 1 5.00 5.00 -
    1.3.2 Isometric Assembly Views 1 5.00 5.00 -
    1.3.3 Detail Drawing 1 4.00 4.00 -
    1.3.4 Drawing Views and Presentation 1 1.00 1.00 -
    4 15.00 15.00 -
    ENTRY MARK FORM

    Sub Aspect Req. No. Of Competitor


    Criteria Sub - Criteria Name or Description Type Aspect - Description or Nom. Weight
    ID O/ S Size 1 2 3 4 5 6 7 8 11 12 13 15 16 17 XX

    1.3 Mechanical Design Challenge


    1.3.1 2D Assembly Views
    2D Assembly Views
    - desain sistem floating jack visible atau tidak 1
    - pendetailan floating jack S 0.75 5.000
    - semua komponen floating jack terlihat jelas 0.5
    - views secara umum 0.25
    - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.3.2 Isometric Assembly Views
    Isometric Assembly Views
    - floating jack terlihat jelas 1
    S 5.000
    - penambahan detail views 0.7
    - views secara umum 0.3
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.3.3 Detail Drawing
    Detail Drawing
    - semua part yang baru ada gambar detail 1
    - pemberian dimensi secara umum S 0.75 4.000
    - toleransi 0.5
    - surface / general note 0.25
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.3.4 Drawing Views and Presentation
    View and Presentation S 1 1.000
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.4 Reverse Engineering from a Physical Model item Max Mark Mark
    1.4.1 Presence of part features 27 15.00 15.00 -
    1.4.2 Accuracy of dimensions 30 15.00 15.00 -
    1.4.3 Tolerances 0 2.00 2.00 -
    1.4.4 Surface Texture 1 2.00 2.00 -
    1.4.5 Presentation 2 1.00 1.00 -
    60 35.00 35.00 -
    ENTRY MARK FORM

    Sub Aspect Req. No. Of Competitor


    Criteria Sub - Criteria Name or Description Type Aspect - Description or Nom. Weight
    ID O/ S Size 1 2 3 4 5 6 7 8 11 12 13 15 16 17 XX

    1.4 Reverse Engineering from a Physical Model

    1.4.1 Presence of part features


    A1 O face and holes 0.556
    A2 O 2 thread holes 0.556
    A3 O cylinder and holes 0.556
    A4 O 2 thread holes 0.556
    A5 O face and holes 0.556
    A6 O face 0.556
    A7 O hole 0.556
    A8 O hole 0.556
    A9 O hole 0.556
    B1 O hole 0.556
    B2 O cylinder and holes 0.556
    B3 O face 0.556
    C1 O cylinder and holes 0.556
    C2 O face 0.556
    C3 O 3 cylinder and 3 holes 0.556
    C4 O face and holes 0.556
    C5 O face 0.556
    C6 O arc 0.556
    D1 O separator 0.556
    D2 O water way 0.556
    D3 O 2 ribs 0.556
    D4 O tank 0.556
    1.4 Reverse Engineering from a Physical Model item Max Mark Mark
    1.4.1 Presence of part features 27 15.00 15.00 -
    1.4.2 Accuracy of dimensions 30 15.00 15.00 -
    1.4.3 Tolerances 0 2.00 2.00 -
    1.4.4 Surface Texture 1 2.00 2.00 -
    1.4.5 Presentation 2 1.00 1.00 -
    60 35.00 35.00 -
    ENTRY MARK FORM

    Sub Aspect Req. No. Of Competitor


    Criteria Sub - Criteria Name or Description Type Aspect - Description or Nom. Weight
    ID O/ S Size 1 2 3 4 5 6 7 8 11 12 13 15 16 17 XX

    E1 O hole 0.556
    E2 O hole 0.556
    E3 O hole 0.556
    E4 O cylinder 0.556
    min : 1.750
    Weight : 1.940 kg (material : steel carbon) O 0.556
    max : 2.13
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.4.2 Accuracy of dimensions
    D1 O 0.500
    D2 O 0.500
    D3 O 0.500
    D4 O 0.500
    D5 O 0.500
    D6 O 0.500
    D7 O 0.500
    D8 O 0.500
    D9 O 0.500
    D10 O 0.500
    D11 O 0.500
    D12 O 0.500
    D13 O 0.500
    D14 O 0.500
    D15 O 0.500
    D16 O 0.500
    D17 O 0.500
    1.4 Reverse Engineering from a Physical Model item Max Mark Mark
    1.4.1 Presence of part features 27 15.00 15.00 -
    1.4.2 Accuracy of dimensions 30 15.00 15.00 -
    1.4.3 Tolerances 0 2.00 2.00 -
    1.4.4 Surface Texture 1 2.00 2.00 -
    1.4.5 Presentation 2 1.00 1.00 -
    60 35.00 35.00 -
    ENTRY MARK FORM

    Sub Aspect Req. No. Of Competitor


    Criteria Sub - Criteria Name or Description Type Aspect - Description or Nom. Weight
    ID O/ S Size 1 2 3 4 5 6 7 8 11 12 13 15 16 17 XX

    D18 O 0.500
    D19 O 0.500
    D20 O 0.500
    D21 O 0.500
    D22 O 0.500
    D23 O 0.500
    D24 O 0.500
    D25 O 0.500
    D26 O 0.500
    D27 O 0.500
    D28 O 0.500
    D29 O 0.500
    D30 O 0.500
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.4.3 Tolerances
    BONUS 2.000
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.4.4 Surface Texture
    5 surface (minimum) O 2.000
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1.4.5 Presentation
    Title Block (view label, task, unit, sheet size,
    O Page1 & 2 14 items 0.800
    title, scale, project symbol)
    Layout S Page 1 & 2 0.200
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

    You might also like