Nothing Special   »   [go: up one dir, main page]

Upgrade Guidance For HD Cameras

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

ShenZhen Foscam Intelligent Technology Co.

, Limited

Upgrade Guidance for HD cameras


Suitable for FI9821W V2, FI9818W V2, FI9831W, FI9826W, FI9821P, FI9831P, FI9826P,
FI9805W, FI9804W, FI9804P, FI9805E, FI9805P, FI9805EP, FI9828W,FI9828P.

Attention: After upgrading, please clear the cache of your browser, then it
updates plugin when log-in next time.

This firmware is for HD cameras, FI9821W V2, FI9818W V2, FI9831W, FI9826W,
FI9821P, FI9831P, FI9826P, FI9805W, FI9804W, FI9804P, FI9805E, FI9805P,
FI9805EP, FI9828W, FI9828P.
Please check your camera model on the bottom sticker. Updating with the wrong
firmware could severely damage and/or break your camera.

Note:
1. System firmware 1.4.1.9 or 1.4.1.10, App firmware 2.x.2.8 or 2.x.4.8 or 2.x.1.10 or
2.x.1.116 or 2.x.1.118 can upgrade to this version.
2. If you are not having the above firmware version, please upgrade to
1.4.1.10/2.x.1.118 first, which can be downloaded from
http://www.foscam.com/down3.aspx.

Upgrading procedure (let’s take FI9821W V2 for example to finish the upgrading):

Preparation before upgrading

Upgrade Firmware

Preparation before upgrading:


1. Please restart your camera before the upgrading;
2. Connect camera to router with an Ethernet cable before upgrading;
3. DO NOT upgrade firmware via wireless;
4. DO NOT upgrade firmware over internet, just finish it in LAN;
5. Keep power on during the upgrading;
6. Unplug the SD card before upgrading;
7. Logging your camera as administrator first, upgrade firmware on web page.

Step 1: Login again, go to Settings  System  System Upgrade.


Click Browse  choose Step1_FosIPC_A_sys_ver1.4.1.10.bin  click Open
 Click System Upgrade.

www.foscam.com 1
ShenZhen Foscam Intelligent Technology Co., Limited

Step 2: “Upgrading, do not power off … Xs” pop up, camera IP will disappear
from the IP Camera Tool. Then camera will reboot itself, DO NOT power off the
camera, please wait till the camera IP reappear in the IP Camera Tool.

www.foscam.com 2
ShenZhen Foscam Intelligent Technology Co., Limited

Step 3: Login again, go to Settings  System  System Upgrade.


Click Browse  choose Step2_FosIPC_A_app_ver2.x.1.119.bin  click Open
 Click System Upgrade.

Step 4: “Upgrading, do not power off … Xs” pop up, camera IP will disappear
from the IP Camera Tool. Then camera will reboot itself, DO NOT power off the
camera, please wait till the camera IP reappear in the IP Camera Tool.

www.foscam.com 3
ShenZhen Foscam Intelligent Technology Co., Limited

Step 5: Login again to check the System Firmware Version, Application


Firmware Version and Plug-In Version.

Congratulations, your camera successfully upgraded to the latest firmware!

Note:
1. You’d better re-install the plug-in, in case it did not upgrade.
2. The correct firmware version after upgrade:

End

--- by Foscam Technical Support Team

www.foscam.com 4

You might also like