Parker Moduflex Micro
Parker Moduflex Micro
Parker Moduflex Micro
Pneumatic micro-valve
modular islands
Edition : January 2008 / Catalogue no. PDE2588TCUK-ev
Micro-Moduflex Valve System
T series
A small group of cylinders only need a short valve
island.
T series islands: In that case, it is simple and economic to use
individual electrical connectors. The «IP67» clip-on
Individual connectors connectors enable the valve island to be installed
close to the actuators.
V series
When the module quantity increases, the V
V series islands: series with an integrated electrical connectors
Integrated connections becomes necessary. The valve island can be
with multi-connector connected to the PLC through a multi-wire cable.
valve island head module Equiped with an IP6 guillotine or a standard
Sub-D 2 connector, the valve island is instantly
connected.
V series
Compatible with all common field bus protocols,
V series the V series, equiped with a field bus
islands : communication module, may easily be
Integrated connected to any network.
connections with «IP6» protected, with up to 16 solenoid pilots
field bus (depending on protocol), a valve island may be
communication located close to the actuators.
module
Island assembly
tie rod
Dual 4/2
Clip-on pneumatic
connectors
Straight for 4 or 6 mm tube OD
Power supply common 1
4/2
Double acting cylinder
. General specifications
Exhaust collection All exhausts are collectable, including solenoid pilot exhaust
Life Cycle 0 million operations (with dry air, Hz, 20°C, 6 bar)
Operating temperatures - 1°C to 60°C (with dry air, Hz, 20°C, 6 bar)
9,0
8 bar
8,0
Operating pressure : - 0.9 to 8 bar
7,0
6 bar Operating temperature :
Pressure Drop ( bar )
6,0
5,0
4 bar Field bus island 0°C to + 55°C
4,0
3,0
Flow (according to ISO 6358) c = 0.65 Nl/s x bar
2 bar
2,0 b = 0.27
1,0 Qn = 2.7 l/mn
Qmax = 4.6 l/mn
0,0
0 1 2 3 4 5 6 7 Flow (l/s)
Flow ( l / s )
Materials Certifications
Body Polyamid EMC / CE mark. According to
Spool Brass EN 61 000-6-2
Spool seal Nitrile
Pilot seals Polyurethane
Subbase seal Nitrile
Sleeve Brass
P. O. check valve Polyurethane
Spring Stainless steel
Assembly screw Galvanised steel
Subbase Polyamid
Clip Polyamid
Plugs Aluminium
Clip-on connectors
Power supply common 1
Exhaust common 3
Ø 4 ou 6 mm Ø 4 ou 6 mm Plug
Lock
Field bus
communication
module
Pneumatic
island
head
module
Valve island head and tail module set Pneumatic clip-on connectors
Description Weight (g) Order code
P2M2HXT01 Description Tube OD* Weight (g) Order code
Straight 6 mm 3 FMD06-2
Pneumatic head 64 P2M2HXT01 8 mm FMD08-2
CMD08-2 4
and tail Module set
10 mm 5 FMD10-2
Elbow 6 mm 5 CMD06-2
Indicates stocked product. CMD10-2
8 mm 6 CMD08-2
10 mm 7 CMD10-2
M u ff l e r 5 MMDVA2
* Pack quantity : 10
P 2 M 1 V J E E 2 C V 0 1 F 6
Series Electrical connectors Clip-on plugs Pneumatic connectors
Individual 0 T orV series, without cable 0 0 plug dual 4/2 F4 Straight Ø 4 mm
T
connector 2 T series, 2 m cable 1 1 plug 4/2 + 3/2 (NC or NO) F6 Straight Ø 6 mm
Integrated 5 T series, 5 m cable 2 2 plugs dual 3/2 or single 4/2 C4 Elbow Ø 4 mm
V
connection 9 T series, 9 m cable 3 3 plugs single 3/2 (NF or NO) C6 Elbow Ø 6 mm
P2 M 2HX T 0 1 F 6 C8
Island head and tail module set Pressure port connector Exhaust port connector
F6 Straight Ø 6 mm C6 Elbow Ø 6 mm F6 Straight Ø 6 mm C6 Elbow Ø 6 mm
HXT01 Valve island pneumatic F8 Straight Ø 8 mm C8 Elbow Ø 8 mm F8 Straight Ø 8 mm C8 Elbow Ø 8 mm
head and tail set F0 Straight Ø 10 mm C0 Elbow Ø 10 mm F0 Straight Ø 10 mm C0 Elbow Ø 10 mm
MM Muffler MM Muffler
V series valve island : Electrical field bus head modules for AS-i protocol
2 screws
4 mm dia.
surface
mounting
or
DIN rail
mounting
2 screws
4 mm dia.
surface
mounting
or
DIN rail
mounting
2 mounting holes 4.3 mm dia. DIN rail 35x7 mm or 35x15 mm
2 screws
4 mm dia.
surface
mounting
or
DIN rail
mounting
2 screws
4 mm dia.
surface
mounting
or
DIN rail
mounting
© 2008 Parker Hannifin Corporation. All rights reserved. Edition : January 2008 / Catalogue no. PDE2588TCUK-ev
Parker Hannifin Ltd
Pneumatic Division Europe
The Collins Centre,
Lichfield South, Wall Island,
Birmingham Road, Lichfield.
WS14 0QP United Kingdom
Tel.: +44 (0) 1543 483800
Fax: +44 (0) 1543 483801
www.parker.com/euro_pneumatic Your local authorized Parker distributor