Common Errors and Their Resolutions in Automatic Payment Program Runs
Common Errors and Their Resolutions in Automatic Payment Program Runs
Common Errors and Their Resolutions in Automatic Payment Program Runs
In the course of executing this program, users may come across certain errors that may prevent them
from completing the process. This post tries to discuss some of those errors, their causes and how to
resolve them.
Note: We do not claim that this is an exhaustive list of all the various errors you can have in executing
the APP.
Note also that the automatic payment program can handle both Vendor outgoing payments and
customer incoming payments.
SapGurus.com
As can be seen on the screen shot (above) this open item is not due for payment.
Solution: Either (a) wait until the invoice is due for payment or (b) change the baseline date of
the document with transaction FBO2 and run the payment program again. But only do this if it is
absolutely necessary.
If you are executing the payment program with the F111 transaction, this error may mean that
the payment request you are trying to pay has not been released.
Note: If after executing transaction for payment request (FIBLAPOP or FIBLFFP) and you get the
below message, you should release the item for payment with transaction F8REL - Release
Payment Requests. Otherwise, if you go ahead to execute the APP (F111) you will get this error
Company codes xxxx/xxxx do not appear in proposal 09.08.2016 FA001; correct
Solution: release the payment request with transaction F8REL and proceed with your
payment run.
SapGurus.com
Click this to select item for release
Note: that you have to first delete the already created payment proposal and start again.
Note: also that if you are the one that created the payment request the system may not allow
you to release it if the dual control is active and you may get the message below. Therefore
another officer may release on your behalf.
SapGurus.com
d) Conflicting selection between the payment request parameters and the payment run
parameters
Sometimes your selected parameters in the payment request screen (FIBLAPOP - Vendors -
Payment Request or FIBLFFP - Free Form Payment) and that of the payment run (F111) is
contradictory. Example in the payment proposal you opted to pay by Swift 103 as a payment
method, but when running the payment program (F111) you selected the Check as in the
screen shots below:
FIBLAPOP Parameters.
F111 Parameters
SapGurus.com
If you proceed to edit proposal or will again have this error:
This is normally not an issue with F110 as you can over-ride any default made in the vendor
master or the vendor invoice data during the payment run.
Solution: change your parameter in your payment run to align with the payment request
selection.
Solution: Unblock the Vendor with transaction fk05/xko5 and proceed with your
payment
SapGurus.com
Solution: Confirm the vendor with transaction FK08 and run the payment program again.
Note: that the one that make the changes to the vendor master data cannot be the one to confirm it
(dual control principle). This is a standard control of SAP in vendor master data maintenance.
SapGurus.com
Note: also that you do not need to go out of the payment run or delete your payment proposal. Just
confirm the vendor and proceed.
SapGurus.com
Solution: You may choose to accept the proposal of the system or selected another house bank
and account that fits the criteria and pay from that.
SapGurus.com
4) Commitment item xxx/0000//11011096 does
not exist
You have implemented the funds management module (SAP FM), and you created a GL account for (say
your house bank) without setting it up as a commitment item. When you implement the FM module of
SAP any GL account you created in FI should have a corresponding master data (Commitment item)
created in FM.
Note: Initially there is no error message displayed for this, however you know that the payment program
was not successfully executed because it does not generate any payment document. It just said:
But after going to the log you will find the reason for none payment.
SapGurus.com
Solution:
a) Create the commitment item and assign it in the GL master data
b) Use transaction FMCIA to create commitment item (we will discuss this in future when we go in
to SAP FM)
c) Use transaction FS00 to assign commitment item to GL master data
Action:
a) Delete the payment run (as below)
SapGurus.com
Click on to delete
SapGurus.com
c) Delete the payment parameter
SapGurus.com
Payment run is now successful.
This means that the House Bank Account is not configured for this payment method. Before you can use
a House Bank Account in an automatic payment program (APP), the House Bank, the House Bank
Account and the currency must be configured in the paying company code and for the selected payment
method.
SapGurus.com
This is a configuration issue and will be discussed in detail in the post on automatic payment program
configuration.
Solution:
Send this error to the FI Support Consultant to make the necessary configuration and after which you
should proceed with your payment process.
Sometimes it may also be that the house bank account you selected has a different currency and there is
no alternative one fitting the criteria for the system to propose. If alternative house bank account is
available the system will instead issue the following error
. This error has already been address in point 3.
This error means that, the selected house bank account is not assigned to this payment medium variant.
It should be noted that this error comes after the payment program run is actually completed and
payment documents already generated. It is an error that happens in the generation of the selected
payment medium.
Solution: This is a system configuration issue. Contact your FI Support Consultant do the necessary
assignment using transaction OBPM4 after that you can proceed with the generation of the payment
medium.
Automatic payment method configuration will be discussed in detail in later blog postings.
SapGurus.com
7) Account 200099 is contained in proposal
09.08.2016 FA002, release not possible
This error may appear when one of the vendor in the current payment run is locked in an earlier
payment run by another staff or even yourself. When you run the payment program but for a reason it
remains incomplete, then the vendor(s) in this payment run is locked.
Solution:
a) Either delete the earlier payment proposal locking the vendor ( how to delete the payment
proposal and payment parameter has just been demonstrated above) or
b) Go and complete the earlier payment run, and then proceed with the current run again.
SapGurus.com
Solution: Use transactions FK02, or XK02 to maintain the master data and proceed with your payment.
Solution: This is a configuration issue, please contact your SAP FI Support Consultant. Proceed with your
payment after the correction. Alternatively, change the payment method and proceed with your
payment.
SapGurus.com