International Institute of Technology & Management
International Institute of Technology & Management
International Institute of Technology & Management
&
MANAGEMENT
Q.1 How will you compute net area of a plates connected by chain riveting. (4)
Q.3 On the basis of drawing, How the rivets can be classified. (4)
(b) Give expression for net area of single angle connected by one leg only.
Q.5 Design a suitable flat act as a tension member in a truss. The member is subjected to axial
pull of 180KN USE 20mm diameter rivets. Give a sketch of the joint. Assume
Q.2 What are the equipment used for erection and placement of girders in bridges
Q.3 what are the various advanced scaffolding techniques used in high rise buildings.
Q.4 classify the equipment used for excavation on the basis of productivity and its usage in
different type of soil.
Q.1 Design for delhi self supporting steel stack of height 120m above the foundation. The
diameter of cylindrical part of chimney is 5.0 m. The foundation has rest on soil having
bearing capacity 150 N/m2 . design four section along with the foundation.
Q.2 what are the various forces acting on a steel stack and also detail the design
consideration for steel stacks.
Rivet value
Radius of gyration