Machine Tools (Tk103n)
Machine Tools (Tk103n)
Machine Tools (Tk103n)
Cat.No.
Safety Precautions
Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could result
in serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines should
be followed at all times.
1
CONTENTS
Whether you just glance through this booklet or give it an intensive reading, we are sure you'll agree that
NITTO KOHKI's portable hydraulic and electric machines, couplers and pneumatic hand tools are among
the finest precision engineered equipment to be found today.
PORTABLE MAGNETIC BASE AUTOMATIC DRILLING MACHINE Speedy, high Speedy, high Drilling Drilling holes
ATRA ACE
precision precision holes in steel in shaped
BORING
hole drilling hole drilling steel
3-4
auto feed (WA-3500 / WA-5000)
PORTABLE MAGNETIC BASE DRILLING MACHINE Speedy, high Speedy, high Drilling Drilling holes
ATRA ACE
precision precision holes in steel in shaped
BORING
hole drilling hole drilling steel 5
manual feed (WOJ-3200 / W0-3200)
PORTABLE MAGNETIC BASE DRILLING MACHINE Speedy, high Speedy, high Drilling Drilling holes
ATRA ACE
precision precision holes in steel in shaped
BORING
hole drilling hole drilling steel 6
manual feed (AO-5575)
PORTABLE MAGNETIC BASE DRILLING MACHINE Speedy, high Speedy, high Drilling holes Drilling holes
precision precision in steel in shaped
ATRA MASTER 8
flanges cutting by attachment drilling at
BORING welder elevated site
SELFER ACE
punching on bolt holes holes on ship punching
PUNCHING
steel plates on steel
plates
frameworks holes on
shaped steels
11
HS SERIES & HYDRAULIC PUMP
PORTABLE SINGLE-ACTING HYDRAULIC PUNCHER Hole Punching Punching On-site
SELFER
punching on bolt holes holes on ship punching
PUNCHING
steel plates on steel
plates
frameworks holes on
shaped steels
12
HA SERIES & HYDRAULIC PUMP
ELECTRICALLY OPERATED HYDRAULIC PUNCHER Speedy, easy Punching On-site
hole holes on small hole
BEVELER
of large of steel plates of colums
CHAMFERING
workpieces
15
HAND BEVELER
PORTABLE CHAMFERING TOOLS Chamfering Chamfering Surface Chamfering
BEVELER
of large of steel plates chamfering of cast molds
CHAMFERING
workpieces of pre-welded
shaped steel
15-16
parts
MINI BEVELER
PORTABLE CHAMFERING TOOLS Chamfering Chamfering Chamfering
of dies and of steel plate of steel plate
Power Tools, delvo, Spring Balancer, Linear Motor Driven Free Piston System 17
CUPLA Series / Mini Cupla Super 18
2
ATRA ACE auto Portable Magnetic Base Automatic Drilling Machine
Fail-Safe Protection
Built-in motion sensor
If any lateral movement or excess vibration is detected, both the drill and
the feed motor stop instantly. Nitto Kohki is the first company to
incorporate this feature into magnetic base drills.
Fail-safe restart
The drill will not re-start even if power is re-supplied after accidental
shutdown. Drilling can only be continued after turning on the drill switch.
613 mm
535 mm
3
ATRA ACE auto Portable Magnetic Base Automatic Drilling Machine
The feed speed is reduced for the first few seconds after boring
begins to ensure a smooth cut through the mill scale.
Auto-feed
Automatic control & feed are activated by simply
pushing the rod handle to engage the gears.
Load sensor ON
Rod
The dual sensing system responds to handle
both drilling and feeding forces on the
cutter for the optimum cutting condition.
Variable speed
The feed speed is continuously monitored and
updated proportionally to the load on the cutter.
Cycle stop
After the cut has finished, a detector responds to the reduction in
load and both the drill and the feed motor automatically stop.
Overload stop
When an excessive load is applied to the cutter, both the drill and the
feed motor will stop automatically to prevent the cutter from breaking.
Specifications
Model WA-3500 WA-5000
Power Source (Single Phase) 110 - 120 V AC, 50/ 60 Hz 220 - 240 V AC, 50/ 60 Hz 110 - 120 V AC, 50/60 Hz 220 - 240 V AC, 50/60 Hz
Rated Power Consumption W 1,100 1,150
Electric
Drill Rated Current A 10.2 5.1 10.8 5.4
-1 (rpm)
No Load Speed min 950 350 / 650
Magnet Power Consumption W 34 75
Hole-cutting Capacity Cutter Hole Diameter Plate Thickness Hole Diameter Plate Thickness
One-touch type JETBROACH 25L - - 12 to 17 mm 9 to 25 mm
One-touch type JETBROACH 35L 17.5 to 35 mm 9 to 35 mm 17.5 to 40 mm 9 to 35 mm
One-touch type JETBROACH 50L 17.5 to 35 mm 9 to 35 mm 12 to 50 mm 9 to 50 mm
One-touch type JETBROACH 75L - - 17.5 to 50 mm 9 to 75 mm
One-touch type HI-BROACH 25L 14 to 35 mm 9 to 25 mm 14 to 50 mm 9 to 25 mm
One-touch type HI-BROACH 50L - - 14 to 50 mm 9 to 50 mm
Magnet Holding Power N (kgf) 7,056 (720) 9,800 (1,000)
Magnet Dimensions mm 92 x 216 101 x 201
Mass (Weight) kg 20 23
Pilot Pin 08035 A2 : 1 pc. Pilot Pin 08050 A3 : 1 pc.
Chain Ass'y : 1 set Chain Ass'y : 1 set
Side Handle Ass'y : 1 set Side Handle Ass'y : 1 set
Standard Accessories 3 mm Hex Socket Screw Key : 1 pc. 3 mm / 4 mm Hex Socket Screw Key : each 1 pc.
8 x 10 mm Spanner : 1 pc. 8 x 10 mm Spanner : 1 pc.
Cutting Oil 0.5 L : 1 can Cutting Oil 0.5 L : 1 can
Plastic Case : 1 pc. Guard Ass'y : 1 set Plastic Case : 1 pc. Guard Ass'y : 1 set
4
ATRA ACE WOJ-3200/WO-3200 Portable Magnetic Base Drilling Machine
Specifications
Model WOJ-3200
Power Source (Single Phase) 220 - 240 V AC, 50/60 Hz
5
ATRA ACE WOJ-3200/AO-5575 Portable Magnetic Base Drilling Machine
AO-5575
of the cutter.
Specifications Hi Speed
Model AO-5575
Power Source (Single Phase) 220 - 240 V AC, 50/ 60 Hz
Rated Power Consumption W 1,150
Electric
Drill Rated Current A 5.4
No Load Speed min-1 (rpm) 350 / 650
Magnet Power Consumption W 50
Hole-cutting Capacity Cutter Hole Diameter Plate Thickness
One-touch type JETBROACH 12 to 55 mm 9 to 75 mm 611 mm
Mounting the cutter Removing the cutter Mounting the twist drill
6
ATRA ACE quick auto Portable Magnetic Base Drilling Machine
QUICK AUTO Drills increase productivity and reduce hole drilling cost.
Proven Automatic Tecnology
quick auto Self feeding Limit Switch Automatic step feed
Load detection Automatic return Emergency stop
Automatic return
Once drilling is completed and the slug is ejected from the hole, the cutting bit is quickly retracted.
This quick drill motor retraction allows the user to move onto the next hole more quickly.
LOAD DETECTOR
LOAD
ON STOP
Specifications
Model QA-4000 QA-6500
Power Source (Single Phase) 115 V AC, 50/60 Hz 220 - 240 V AC, 50/60 Hz 220 - 240 V AC, 50/60 Hz
Rated Power Consumption W 680 1,010 One-touch Cutter
Electric Replacement!
Drill
Rated Current A 6.1 3.0 4.5
One-Touch arbor system requires no
-1 (rpm)
No Load Speed min 750 400 / 750 tools for cutter installation and removal.
Magnet Power Consumption W 50 75
Hole-cutting Capacity Cutter Hole Diameter Plate Thickness Hole Diameter Plate Thickness
One-touch type JETBROACH 35L 17.5 to 40 mm 9 to 35 mm 17.5 to 40 mm 9 to 35 mm Improved Feature
Bearing Bracket
One-touch type JETBROACH 50L - - 17.5 to 65 mm 9 to 50 mm
Precision
14 to 15 mm 9 to 12 mm 18 to 35 mm 9 to 25 mm bearing bracket
One-touch type HI-BROACH 25L
16 to 18 mm 9 to 25 mm - - aligns cutters
precisely, which increases
Magnet Holding Power N (kgf) 6,664 (680) 9,800 (1,000) cutter life.
Magnet Dimensions mm 82 x 172 100 x 200 Chip Breaker
Mass (Weight) kg 18.5 26 Chip breaker prevents swarf
Pilot Pin 08035 A2 : 1 pc. Chain : 1 pc Pilot Pin 08050 A3 : 1 pc. Chain : 1 pc.
and chip nesting.
3 mm Hex Socket Screw Key : 1 pc. 3 mm Hex Socket Screw Key : 1 pc.
4 mm Hex Socket Screw Key : 1 pc. 4 mm Hex Socket Screw Key : 1 pc.
Standard Accessories 8 x 10 mm Spanner : 1 pc. 8 x 10 mm Spanner : 1 pc.
Cutting Oil 0.5 L : 1 can Tool box : 1 pc. Cutting Oil 0.5 L : 1 can Tool box : 1 pc.
Side Handle : 1 pc. Oil Tank Ass'y : 1 set. Chip Stopper : 1 pc. Side Handle : 1 pc.
Oil Tank Ass'y : 1 set.
7
ATRA ACE manual feed Portable Magnetic Base Drilling Machine
Specifications
Model A-100
Power Source (Single Phase) 220 - 240 V AC, 50/60 Hz
Rated Power Consumption W 1,600
575 mm Electric
Rated Current A 7.4
Drill
No Load Speed min-1 (rpm) 330
Magnet Power Consumption W 80
Hole-cutting Capacity Cutter Hole Diameter Plate Thickness
Side-Lock type JETBROACH 75L 50 to 100 mm 13 to 75 mm
318 mm 705 mm
Magnet Holding Power N (kgf) 17,640 (1,800)
Magnet Dimensions mm 130 x 256
73.5 mm
Mass (Weight) kg 50
Pilot Pin 12075 : 1 pc. Chain : 1 pc
Side-lock Type Cutter 2 mm / 2.5 mm / 3 mm / 4 mm / 5 mm / 6 mm /
8 mm Hex Socket Screw Key : each 1 pc.
Max. Hole-cutting Capacity : 100 mm dia. Standard Accessories 7 x 8 mm Spanner : 1 pc.
Max. Plate Thickness : 75 mm Cutting Oil 0.5 L : 1 can Tool box : 1 pc.
Oil Cap Ass'y : 1 set. Rod Handle : 3 pcs.
N.B. : The electric drill and drill mount fixture do not come with ATRA MASTERs.
8
JETBROACH CUTTERS & HI-BROACH CUTTERS
HI-BROACH HI-BROACH
WO-3200
WO-3200
WA-3500
WA-5000
WA-5000
AO-5575
QA-4000
QA-6500
AO-5575
One-touch Type One-touch Type
mm mm
Depth PN Depth PN
dia. dia.
BROACH CUTTERS are far better than twist drills:
12 TK00698 12 TK00721
No dead point
13 TK00699 13 TK00722
Peripheral cutting
14 TK00700 14 TK00723
Blade cutting resistance reduced by 50 % 15 TK00701 15 TK00724
Available diameter size: 12 - 100 mm 16 TK00702 16 TK00725
Test Drilling is very often the only way to 17 TK00703 17 TK00726
determine the machinability of difficult 17.5 TK00335 18 TK00727
materials. Use a small size cutter 18 TK00336 19 TK00728
wherever possible in order to 19 TK00337 20 TK00729
minimize trial costs. 19.5 TK00338 21 TK00730
20 TK00339 22 TK00731
21 TK00340 23 TK00732
21.5 TK00341 24 TK00733
22 TK00342 25 TK00734
Industrial cutters for faster and better finished holes. 22.5 TK00343 26 TK00735
The Spring-loaded pilot pin picks up the hole location quickly, 23 TK00344 27 TK00736
and ejects the slug automatically at the end of cut 23.5 TK00345 28 TK00737
Available with No. 2 - 4 Morse taper shanks 24 TK00346 29 TK00738
Oil cup complete Ass'y (PN TB00350) is available as an optional 24.5 TK00347 30
50 TK00739
attachment which provides continuous and adjustable cutting 25 TK00348 31 mm TK00740
oil flow to the cutting area
26 TK00349 32 TK00741
27 25 TK00351 33 TK00742
28 mm TK00352 34 TK00743
Morse Cutter
Model Cutter Pilot Pin Accessory
Taper No. Diameter 29 TK00353 35 TK00744
BHM-02035 06025 30 TK00354 36 TK00745
12 - 17 dia. (PN TK01167)
TB00390 HBO-25L Optional
31 TK00355 37 TK00746
M.T.No.2 17.5 - 35 dia. 08025 32 TK00356 38 TK00747
(PN TJ12696)
33 TK00357 39 TK00748
08035
JBO-35L 17.5 - 35 dia. (PN TJ15859) Standard 34 TK00359 40 TK00749
163 mm
35 TK00361 41 TK00750
06025
12 - 17 dia. (PN TK01167) 36 TK00704 42 TK00751
HBO-25L 37 TK00705 43 TK00752
17.5 - 52 dia. (PN08025
TJ12696) 38 TK00706 44 TK00753
BHM-03050 06050 39 TK00707 45 TK00754
TB00392 12 - 18 dia. (PN TK01166) Optional
40 TK00708 46 TK00755
HBO-50L 0850 41 TK00709 47 TK00756
(PN TK00802)
19 - 52 dia. 08050 42 TK00710 48 TK00757
(PN TJ16019) 43 TK00711 49 TK00758
M.T.No.3 182 mm 08035
JBO-35L 17.5 - 40 dia. (PN TJ15859) Standard
44 TK00712 50 TK00759
45 TK00713 51 TK00760
JBO-50L 17.5 - 65 dia. 08050
Optional
46 TK00714 52 TK00761
JBO-50L(W) 18 - 35 dia. (PN TJ16019) 47 TK00715
BHM-13075
48 TK00716
TB00352 49 TK00717
50 TK00718
51 TK00719
52 TK00720
248 mm 12075
JBS-75L 50 - 100 dia. Standard
BHM-14075 (PN TA9A207)
TB00354
M.T.No.4
232 mm
65 mm 65 mm(25L)
(12 - 19.5 dia.) 86 mm 73 mm(35L) 90 mm 117 mm
95 mm(12 - 17 50L) 156 mm
58 mm 90 mm(17.5 - 65 50L)
(20 - 52 dia.)
9
JETBROACH CUTTERS & HI-BROACH CUTTERS
Annular Cutters
WOJ-3200
WOJ-3200
WA-3500
WA-5000
WA-3500
WA-5000
WA-5000
AO-5575
QA-4000
QA-6500
AO-5575
QA-6500
AO-5575
One-touch Type One-touch Type One-touch Type Side-lock Type
A-100
mm mm mm mm
Depth PN Depth PN Depth PN Depth PN
dia. dia. dia. dia.
12 TK01148 12 TK01154 17.5 TK01036 50 TJ17709
13 TK01149 13 TK01155 18 TK01003 51 TJ16651
14 25 TK01150 14 TK01156 19 TK01004 52 TJ16652
15 mm TK01151 15 TK01157 20 TK01005 53 TJ16653
16 TK01152 16 TK01158 21 TK01006 54 TJ16654
17 TK01153 17 TK01159 22 TK01007 55 TJ16655
17.5 TK00301 17.5 TK00380 23 TK01008 56 TJ16656
18 TK00302 18 TK00381 24 TK01009 57 TJ16657
19 TK00304 19 TK00382 25 TK01010 58 TJ16658
19.5 TK00305 19.5 TK00383 26 TK01011 59 TJ16659
20 TK00306 20 TK00384 27 TK01012 60 TJ16660
20.5 TK00307 20.5 TK00385 28 TK01013 61 TJ16661
21 TK00308 21 TK00386 29 TK01014 62 TJ16662
21.5 TK00309 21.5 TK00387 30 TK01015 63 TJ16663
22 TK00310 22 TK00388 31 TK01016 64 TJ16664
22.5 TK00311 22.5 TK00389 32 TK01017 65 TJ16665
23 TK00312 23 TK00390 33 TK01018 66 TJ16666
23.5 TK00313 23.5 TK00391 34 75 TK01019 67 TJ16667
24 TK00314 24 TK00392 35 mm TK01020 68 TJ16668
24.5 35 TK00315 24.5 TK00393 36 TK01021 69 TJ16669
25 mm TK00316 25 TK00394 37 TK01022 70 TJ16670
26 TK00317 26 TK00395 38 TK01023 71 TJ16671
26.5 TK00318 26.5 TK00396 39 TK01024 72 TJ16672
27 TK00319 27 TK00397 40 TK01025 73 75 TJ16673
mm
28 TK00320 28 TK00398 41 TK01026 74 TJ16674
29 TK00321 29 TK00399 42 TK01027 75 TJ16675
30 TK00322 30 TK00400 43 TK01028 76 TJ16676
31 TK00323 31 TK00401 44 TK01029 77 TJ16677
32 TK00324 32 TK00402 45 TK01030 78 TJ16678
33 TK00325 33 50 TK00403 46 TK01031 79 TJ16679
34 TK00326 34 mm TK00404 47 TK01032 80 TJ16680
35 TK00328 35 TK00405 48 TK01033 81 TJ16681
36 TK00602 36 TK00406 49 TK01034 82 TJ16682
37 TK00603 37 TK00407 50 TK01035 83 TJ16683
38 TK00604 38 TK00408 51 TK01112 84 TJ16684
39 TK00605 39 TK00409 52 TK01113 85 TJ16685
40 TK00606 40 TK00410 53 TK01114 86 TJ16686
41 TK00411 54 TK01115 87 TJ16687
42 TK00412 55 TK01116 88 TJ16688
43 TK00413 89 TJ16689
JETBROACH 44 TK00414 90 TJ16690
One-touch Type
45 TK00415 91 TJ16691
WOJ-3200
(=W) plates.
TK00416 TJ16692
47 TK00417 93 TJ16693
mm
Depth PN
48 TK00418 94 TJ16694
dia. 49 TK00419 95 TJ16695
18 TK01068 50 TK00420 96 TJ16696
22 TK00622 51 TK00442 97 TJ16697
24 TK00623 52 TK00443 98 TJ16698
24.5 TK00631 53 TK00444 99 TJ16699
25 50 TK00624 54 TK00445 100 TJ16700
26 mm TK00625 55 TK00446
26.5 TK00632 56 TK00447
28 TK00626 57 TK00448
32 TK00627 58 TK00449
35 TK00628 59 TK00450
60 TK00451
61 TK00607
62 TK00608
63
Combination of Pilot Pins &
TK00609
64 TK00610
Broach Cutters 65 TK00611
Pilot Pin HI-BROACH Cutters Pilot Pin JETBROACH Cutters Pilot Pin JETBROACH Cutters
06025 PN : TK01167 HBO 12 - 17 dia. 06025 PN : TK01167 JBO 12 - 17 dia. JBO 17.5 - 65 dia.
6.35 dia. Depth 25 mm 6.35 dia. Depth 25 mm Depth 50 mm
5 dia. 5 dia.
08050 PN : TJ16019
81 mm 81 mm
8 dia.
08025 PN : TJ12696 HBO 17.5 - 52 dia. 08035 PN : TJ15859 JBO 17.5 - 40 dia. 112 mm JBO(W) 18 - 35 dia.
Depth 25 mm Depth 35 mm Depth 50 mm for stacked two (=W) plates.
8 dia. 8 dia.
76 mm 91 mm
06050 PN : TK01166 HBO 12 - 18 dia. 06050 PN : TK01166 JBO 12 - 17 dia. 08075 PN : TJ17436 JBO 17.5 - 55 dia.
6.35 dia. Depth 50 mm 6.35 dia. Depth 50 mm Depth 75 mm
5 dia. 5 dia. 8 dia.
0850 PN : TK00802
8 dia. HBO 19 - 52 dia. Pilot Pin JETBROACH Cutters
7 dia. Depth 50 mm
100 mm 12075 PN : TA9A207 JBS 50 - 100 dia.
Depth 75 mm
08050 PN : TJ16019
6
dia.
8 dia. 192 mm
112 mm
10
SELFER ACE Portable Double-Acting Hydraulic Puncher
24 mm
Specifications In case of mild steel maximum punching thickness must be decided based on the equation of 0.8 x punching diameter. For details see the instruction manual.
Specifications
for SELFER ACE Model HPD-05
Power Source (Single Phase) 115 V / 230 V AC
Max. Output Pressure MPa (kgf/cm2) 68.65 (700)
Double-Acting Output 50 Hz 60 Hz
At No Load L /min 1.20 1.44
11
SELFER HA Type Portable Single-Acting Hydraulic Puncher
24 mm
Specifications In case of mild steel maximum punching thickness must be decided based on the equation of 0.8 x punching diameter. For details see the instruction manual.
Specifications
Model SC-05
Power Source (Single Phase) 115 V / 230 V AC
Max. Output Pressure MPa (kgf/cm2) 68.65 (700)
Single-Acting Output 50 Hz 60 Hz
At No Load L /min 1.20 1.44
At 68.65 MPa L/min 0.55 0.66
Motor 0.4 kW 4P
324 mm
Reservoir Capacity L 4.0
Discharge Port Rc 3/8
Mass (Weight) kg 27.5
380 mm
12
HANDY SELFER Electrically Operated Hydraulic Puncher
420 mm
340.5 mm
357 mm
368 mm
Specifications
Model E25-0615 E55-0619
Power Source (Single Phase) 220 - 240 V AC, 50/ 60 Hz 115 V AC, 50/ 60 Hz 220 - 240 V AC, 50/60 Hz
Rated Power Consumption W 305 670 670
Motor
Rated Current A 1.6 6.0 3.0
Max. Punching Diameter mm 15 19
Max. Punching Thickness mm 6 6
Max. Throat Depth mm 25 55
Punching Time sec (single pass) 4 2
Power Cord m 2.4 2.4
Mass (Weight) kg 7.0 14
E Punch 15 : 1 pc. EL Punch 18 : 1 pc.
E Die 15A : 1 pc. EL Die 18A : 1 pc.
E Die 15B : 1 pc. EL Die 18B : 1 pc.
Spanner 8 : 1 pc. Spanner 10 x 12 mm : 1 pc.
Standard Accessories 10 x 12 mm Spanner : 1 pc. 3 mm Hex. Socket Screw Key : 1 pc.
2.5 mm Hex. Socket Screw Key : 1 pc. 4 mm Hex. Socket Screw Key : 1 pc.
4 mm Hex. Socket Screw Key : 1 pc. 5 mm Hex. Socket Screw Key : 1 pc.
Auxiliary Oil : 1 pc. Stand Assy : 1set
Auxiliary Oil : 1 pc.
E25-0615 t1 B-t1
For thick sheets B 4-6 Max. 4 75 x 40 t7
2
For thin sheets A 2 - 3.2 Max. 3 100 x 50 t7.5
13
PUNCHES & DIES
Punches & Dies for SELFER Puncher Sales Unit : 1 Piece
14
BEVELER Portable Chamfering Tools
EMB-0307B
Mild Steel
15C
Stainless Steel Mild Steel Mild Steel Stainless Steel Mild Steel
3C 7C 3C 1.5C 3C
4R 4R 2R, 3R 2R 3R
400 mm
189.6 mm 107.5 mm 136.4 mm
295 mm
150 mm 278 mm
179 mm
220 mm 316.4 mm
(Photo: 230 V AC Type )
Finish a surface so fine that Applicable to stainless steel and An outer R-part attachment allows Applicable to stainless steel and
post-sanding is unnecessary mild steel chamfering chamfering of outer diameters with mild steel chamfering
a radius greater than 170 mm
Column R-section can be chamfered Pipe outer edge can be also Minimum chamfering plate thickness
with accessory Plate B processed with standard accessories is 2 mm (Max.0.5C)
Insert with 4-side blades per piece Dust box collects swarf and chips An optional inner head assy allows An optional straight plate allows
practices good economy effectively chamfering a pipe of inner diameter chamfering a straight edge shoulder
larger than 100 mm (50R)
Specifications
Model (Electric Tool) HB-15B EMB-0307B MB-03A ECB-0203
Power Source (Single Phase) 115 V AC 230 V AC 220 - 240 V AC, 50/60 Hz 230 V or 115 V AC, 50/60 Hz 220 - 240 V AC, 50/60 Hz
Rated Power Consumption W 910 910 1,010 430 450
Rated Current A 10.5 4 4.6 2 / 4.5 2.1
Rated Duty min Continuous Continuous 30 30
-1
No-load Speed min (rpm) 3,340 2,750 11,000 11,000 11,000
Mild Steel 0C - 15C (7C per chamfering) 0C - 7C, 2R, 3R, 4R 0C - 3C, 2R, 3R 0C - 3C, 2R, 3R
Chamfering Capacity
Stainless Steel - 0C - 3C, 2R, 3R, 4R - 0C - 1.5C, 2R
Chamfer Angle 15 - 45 15 - 45 45 45
Power Cord m 5 4 2.5 2.5
Mass (Weight) kg 15 3.9 2.5 2.5
4 / 5 / 6 mm Hex. Carbon Brush Ass'y : 1 pc. 3 & 4 mm Hex. Insert 12.7 with hole : 1 pc.
Socket Screw Key : each 1 pc. 4 mm Hex. Wrench Key : 1 pc. Socket Screw Key : each 1 pc. Insert set screw 4 7 : 1 pc.
Spanner 24 27 : 1 pc. Insert 12.7 with hole : 1 pc. Spanner T-9F : 1 pc. 5 mm Hex. Socket Screw Key : 1 pc.
Standard Accessories Hook spanner 25-28 : 1 pc.
3 mm T Wrench Key : 1 pc.
Insert Set Screw 4 7 : 1 pc.
Hex Nut M8 : 2 pcs.
Hex. Nut M8 : 2 pcs.
8 25 mm Hex.
Spanner 8 10 : 1 pc.
Spanner T-15D : 1 pc.
TA9A093 Insert 12.7 Ass'y 8 25 mm Hex. Socket Set Screw : 2 pcs. Socket Set Screw : 2 pcs. Adjustment gauge : 1 pc.
(12 pcs./set ) : 1 set Spanner T-15D : 1 pc.
In case of chamfering 3R, an optional insert for 3R is necessary, and chamfering 2R, an optional guide sleeve 24 mm dia. and insert for 2R are necessary.
Min. Diameter Min. Radius Min. Depth Min. Diameter Min. Radius Min. Depth Min. Thickness
Chamfering range of
operation CB-02 ECB-0203
15
BEVELER Portable Chamfering Tools
Lever Ring
Type Type
177 mm 202 mm
136 mm
Stainless Steel
126 mm 126 mm Mild Steel
3C 2C
Mild Steel 2R
7C
4R 116 mm
180 mm 180 mm
Applicable to stainless steel and mild steel chamfering Precisely adjust chamfer dimensions with accessory gauge
Simple to adjust chamfering depth and replace insert Versatility chamfer either inner or outer edges
Pipe outer edge can be also processed with standard accessories
Specifications
Model (Pneumatic Tool) AMBL-0307 / AMB-0307 CB-02
Air Pressure MPa (kgf/cm2) 0.59 (6) 0.59 (6)
Air Comsumption m3/min 0.9 0.4
No-load Speed min-1 (rpm) 14,000 13,000
Mild Steel 0C - 7C, 2R, 3R, 4R 0C - 2C, 2R
Chamfering Capacity
Stainless Steel 0C - 3C, 2R, 3R, 4R -
Chamfer Angle 15 - 45 45
Mass (Weight) kg 2.9 1.8
3 & 4 mm Hex. Socket Screw Key : each 1 pc. 8 x 25 mm Hex. Insert 9.525 with hole : 1 pc. Protective cap : 1 pc.
Standard Accessories Spanner T-15F : 1 pc.
Hex Nut M8 : 2 pcs.
Socket Set Screw : 2 pcs.
Insert Set Screw 4 x 7 : 1 pc.
Adjustment gauge : 1 pc.
Spanner T-9F : 1 pc.
Hook Spanner 58-65 : 1 pc.
Optional
PN Description Sales Unit Application model Remarks
TA9A093 Indexable Insert 12.7 Ass'y 12 pcs./set HB-15B
TB01159 Indexable Insert 12.7 with hole Ass'y 10 pcs./set EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
TB01791 Indexable Insert 12.7 Ass'y R2 10 pcs./set EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
TB01651 Indexable Insert 12.7 Ass'y R3 10 pcs./set EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
TB01790 Indexable Insert 12.7 Ass'y R4 10 pcs./set EMB-0307B, AMB-0307, AMBL-0307
TA9A386 Indexable Insert 9.525 with hole Ass'y 10 pcs./set MB-03A, CB-02
TA9A592 Indexable Insert 9.525 Ass'y R2 10 pcs./set MB-03A, CB-02
TA9A638 Indexable Insert 9.525 Ass'y R3 10 pcs./set MB-03A
TA9A728 Plate Ass'y for pipe 1 set HB-15B For pipe 125 - 800 mm dia.
TB02539 Attachment for small dia. pipe 1 set EMB-0307B, AMB-0307, AMBL-0307 For pipe 80 - 200 mm dia.
TA9A594 Inner head Ass'y 1 set MB-03A For min. 100 mm dia.
16
OTHER PRODUCT LINES
Pneumatic & Electric Power Tools,
Labor-saving plus Improved Work Efficiency
A wide range of unique tools for boring and punching
JET CHISEL JET CHISEL AUTO CHISEL SUPER KELEN AIR CHIPPER AIR CHIPPER MYTON MYTON
NEEDLE SCALER NEEDLE SCALER AIR HAMMER PNEUMATIC SCALER SCALING SCALING PNEUMATIC GRINDER PNEUMATIC GRINDER
Model JT-20 Model JEX-2800A Model A-300 Model S-250/S-500/S-1000 Model ACH-16 Model CH-24 Model MLG-25 Model MAGW-40
MYTON MYTON PALM ORBITAL SANDER AIR SONIC BELTON BELTON SUPER HAND AIR DRILL
PNEUMATIC GRINDER PNEUMATIC SANDER PNEUMATIC COMPACT SANDER PNEUMATIC DIE GRINDER PNEUMATIC BELT SANDER PNEUMATIC BELT SANDER FILING PNEUMATIC HAND DRILL
Model MLG-70 Model MAS-40 Model APS-150 Model L-25B Model B-10N Model B-20N Model SH-100A Model ADR-100
17
OTHER PRODUCT LINES
Quick Connecting Fluid Couplings are The World's
Best for both Quality and Quantity
Full line-up consisting of 3,000 series, 20,000 type variations. The couplings eliminate inconvenience of thread-in or
bolted flange connections, fluid leakage, or hose kinking but provide speedy control and maintenance of fluid piping.
PF type (Female thread for torch connection) SF type (Female thread for torch connection)
S22PF For Oxygen For oxygen torch side S22SF For Oxygen For oxygen gauge side
S33PF For Fuel Gas Fox fuel gas torch side S33SF For Fuel Gas For fuel gas gauge side
S23SF* For Oxygen For oxygen gauge side
S33SF* For Fuel Gas For fuel gas gauge side
PFB type (Female thread with backflow stop valve) SM type (Male thread)
Exclusively for welding S23PFB-2* For Oxygen For oxygen torch side S22SM For Oxygen For Rc 1/4
S33PFB-2* For Fuel Gas Fox fuel gas torch side S33SM For Fuel Gas For Rc 3/8
and cutting equipment.
From cylinders to torches, all piping connections associated
with welding and cutting equipment are now in push-to- PN type (Nut type for small diameter hose) SN type (Nut type for small diameter hose)
connect configurations. S22PN For Oxygen For 5 mm ID S22SN For Oxygen For 5 mm ID
Chrome-plated body for better corrosion resistance. S33PN For Fuel Gas For 5 mm ID S33SN For Fuel Gas For 5 mm ID
Heat-treated plugs for better durability.
Oxygen and fuel gas couplings have different configuration
sizes with sleeves in different appearances, chrome plating
for oxygen and copper plating for fuel gas, to prevent Specifications *Made-to-order item. Available hose sizes are 5 mm x 11.2 mm, 5 mm x 11.5 mm and 5 mm x 11.8 mm.
accidental interconnection. Body material Socket : Brass (chrome-plated) Plug : Steel (chrome-plated)
Smaller diameter design enables wider range of applications. Size 1/4", 5/16", 3/8"
Various types of end configurations have been standardized Working pressure 0.7 MPa
to comply with a wide range of welding and cutting Pressure resistance 1.0 MPa
equipment applications. Interchangeable with Mini Cupla.
Seal material NBR
Select the combination in accordance with your own application.
Working temperature range -20C - +80C
Male thread For regulator For extension hose For torch
18
Overseas Affiliates / Offices
NITTO KOHKI U.S.A., INC. NITTO KOHKI CO., LTD. SINGAPORE BRANCH
TEL:+1-630-924-9393 FAX:+1-630-924-0303 TEL:+65-6227-5360 FAX:+65-6227-0192
Specifications and designs are subject to change at any time without notice.
URL : www.nitto-kohki.co.jp/e
E-mail : overseas@nitto-kohki.co.jp