Samsung SCH-6100 Service Manual PDF
Samsung SCH-6100 Service Manual PDF
Samsung SCH-6100 Service Manual PDF
SERVICE Manual
2. NAM Programming
8. PCB Diagrams
9. Schematic Diagrams
1. Specification
1-1 General
Frequency Range
Transmitter : 1850 - 1910 MHz
Receiver : 1930 - 1990 MHz
Intermediate Frequency
Transmitter : 130.38 MHz
Receiver : 210.38 MHz
Local Frequency
Transmitter : 1st(FTX-130.38), 2nd(260.76MHz)
Receiver : 1st(FRX-210.38), 2nd(420.76MHz)
Current Consumption
Standby : 100mA (Non-slot mode)
Talk : 320mA (at +10dBm)
1-3 Receiver
Notes:
- If you enter the NAM program mode, each item shows the currenly stored data. Go to
the next item by pressing <OK/>.
- You can modify the data by entering a new data.
- If you enter a wrong digit, press <CLR> to delete the last digit. Press and hold
<CLR> to delete all digits.
- To scroll items backwards or forwards, press the VOLUME button on the left side of
the phone.
-------------------------------------------------------------------------------------------------------------------
LCD Display Key in Function
-------------------------------------------------------------------------------------------------------------------
Svc Menu Volume NAM Programming Menu is displayed
1:PCS Phone #
2:General
3:NAM
CDMA Home SID CDMA Home system ID, current status is displayed
Yes -stores it.
or .
OK/
Home SID first SID written in the list, current status is displayed.
4120 number -to change, enter new one.
OK/ -stores it.
List of Equipments
- DC Power Supply
- Test Jig
- Test Cable
- CDMA Mobile Station Test Set HP8924C, HP83236A,
CMD-80, etc
- Spectrum Analyzer(include CDMA test mode) HP8596E
Configuration of Test
Spectrum Analyzer
RF In
HP8924C
RF
In/Out
Power
spliter
Test Jig
DC Power Supply
(+3.8 V)
HANDS FREE
KIT BOX
ANTENNA
CRADLE PWR
DATA
DC POWER
Orange
+ SUPPLY
Red
-
Black (+13.7V)
TEST CABLE
A. To change the phone's state from Normal Mode to Test Mode, You should enter the
following keys.
"4 7 * 8 6 9 # 1 2 3 5"
C. The command "2 0" is mode and channel change, press <OK/> to save.
"3 0 6 0 0"
Channel : 600
Default value : 3
D. To finish the Test Mode, You should enter the command "0 2".
1) The AB(Input Argument Byte Number) values of these commands are used only in
the manual test. In automatic test mode, the AB is regard as 0.
3) After you get a desired test value by performing these commands, if you want to
save the value into the corresponding position.
4-1 General
IMPORTANT INFORMATION
Purpose
The Product Support Tool (PST) offers you the ability to interface with the SAMSUNG
PCS telephone using a PC. With this tool you can program the phones network
system requirements and functionality, swap phone data, and download software
upgrades. This document supports UniPST version x.xx.
EQUIPMENT REQUIRED
INSTALLATION
Software
1.Insert the PST floppy disk into drive (A:\).
2.Create an appropriate directory on the C:\ drive for PST software, Execute
setup.exe file, The installation program creates folder and task bar on the
windows95/98 start bar.
PST SETUP
UniPst supports SAMSUNG PCS portable telephone. You can select serial port COM1
or COM2.
Service Programming
The Service Programming screens enable you to set and change the service
activation parameters of the phones. These items can be changed individually or as
a group via the "Edit Items" Property Sheet of the PST.
There are several pages on the Service Programming Property Sheet
Click "open" icon to select the name of a file whose extension is "mmc". The values
will be read from the named file, and will initialize the parameter values seen on the
Service programming screen
Click Read from the Phone icon to upload the current programmable parameters of
the phone. The values are read from the phone, so the phone must have the power
ON and be properly connected to the PST.
NOTE: To actually view the data you need to go to the Edit Items screens.
Click this icon to edit Number Assignment Module (NAM) items or UI items.
Phone Book
Click this icon to save the current parameters to a file. Once you enter a filename,
Click <OK> button to write all current parameters to that file. This way the same
information can be downloaded into multiple phones.
Write to Phone
Click this icon to write the selected parameter values to the phone. Writing the
selected values to the phone may take up to a minute.
If there are dependencies in a field you can make all the changes in the proper
fields and download the information all together.
If you intend to use this "Write to Phone" feature, it is recommended that you do a
"Read Data from Phone" first, and then make the changes, so that nothing gets
inadvertently overwritten.
2. Click Download to begin downloading the file. You will notice various messages
and a progress bar that informs the user what percentage of the downloading has
already occurred.
3. Click Mode Select box, then Select SERVICE MODE to return to the Service Mode
Screen.
6
5
4
14 8
2
15
16 1
7
9
3
10 11
13
12 13
18
42
19
20
41 21 35 34
32
17
39
22
30
23
36 29 28
33 37
43
27
24 31
38
26
39
25
40
44
45
9 HINGE-HOUSING GH72-00064A 2
10 HINGE-SHAFT GH72-00061A 2
11 HINGE-CAM GH72-00060A 2
12 HINGE-SPRING GH71-00011A 2
13 HINGE-CAP GH72-00059A 2
14 FLIP-COVER GH72-00562A 1
15 MAGNECTIC - 1
18 FPCB-VOL/SPK/BUZ - 1
21 FPCB-MIC - 1
26 SPRING-LOCKER GH70-10516A 1
29 VIBRATOR GH31-00007A 1
30 SPONGE-MOTOR GH74-00516A 1
31 LABEL(R)-QUALCOMM GH68-30846A 1
32 ANTENNA-CONTACT GH71-00056A 1
38 LABEL(R)-BARCODE GH68-30963A 1
39 MACHINE-SCREW 6001-001148 4
40 LABEL(R)-MAIN GH68-00665A 1
41 KEYPAD-DOME GH72-01074A 1
43 ANTENNA GH42-00034A 1
8. PCB Diagrams
9. Schematic Diagrams
MENU SCROLL OK
1 2 3
VBAT
4 5 6
7 8 9
VPD
* 0 #
+3.0VR
2 CN201-2
1 CN201-1
VPD
VPAA2 VPAA2
VPAA2
+3.1VT
VPD
VPA
VPA
T3.6V
+3.1VT
+3.1VT
T3.6V
VPA
+3.1VT +3.1VT
VPAA2
+3.0VR VPD
VPAA1
+3.0VR
KFF6637
+3.0VR
VPD
+3.0VR
+3.0VR
VBAT
TCXO_VPA
VPA
VPAA1