Eircom 5010

Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / cover_0_Vorlage.fm / 24.07.
2003
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / cover_0_Vorlage.fm / 24.07.2003
2
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / covers_I-II.fm / 28.07.2003
The handset at a glance
The handset at a glance
Talk/ Display (display screen)

directory key:
Charge status
Top half:
= flat U fully
Answer a call charged
Initiate dialling = flashes: battery is
Switch from handsfree almost flat or is charging
to "earpiece" mode Current functions and
Bottom half: display keys
Open directory The display keys give you
U access to the functions
shown in the display.
Handsfree key: u vMENU
End call key and
Switch from "earpiece"
On/Off key
to handsfree mode
End call
Lights up: Handsfree is
activated Cancel function
Flashes: Incoming call One menu level back
(press briefly)
Back to idle status
Message key (press for
Accesses the list of SMS, approx.1 second)
hold down for quick Handset on/off (press
access to eircom call for approx. 2 seconds)
answering, caller list
Hash key
Key 1 Keypad lock on/off (press
Select eircom call answer- for approx. 1 second)
ing (press for
approx. 2 seconds) Speed dial key
Open speed dial list
(press briefly)
Star key
Microphone
Ringer on/off
(press for around Recall key
2 seconds) Insert a dial pause (hold
When texting: Toggles key down)
between upper/lower
case and digits
1
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / C_100IVZ.fm / 28.07.2003
Table of Contents
Table of Contents
The handset at a glance . . . . . . . . . . . . . . . . . . . . . . 1
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Preparing to use your phone . . . . . . . . . . . . . . . . . . 6
Installing the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Preparing to use the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Activating/deactivating the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Activating/deactivating the keypad lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operating the telephone, menu guidance . . . . . . 11

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Correcting wrong inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Idle status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Menu operation, with "Setting Handsfree Volume" as an example . . . . . . . . . . . . . . 12
Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Setting the date and the time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Changing the time mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Making external calls and ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Calling Line Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Handset muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Select Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Function that is set for the next call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Functions that are set for all subsequent calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Functions during a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the directory and other lists . . . . . . . . . . . . 19

Directory and speed dial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Last number redial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Opening lists with the Message key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Caller list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2
Table of Contents
SMS (Text Messages) . . . . . . . . . . . . . . . . . . . . . . . 26

Before you can send and receive text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Text message sending and the draft message list . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Receiving text messages and the incoming message list . . . . . . . . . . . . . . . . . . . . . . 31
Text messages to PABX's . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Errors when sending and receiving a text message . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using eircom call answering . . . . . . . . . . . . . . . . . 35

Configuring eircom call answering for fast access . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Listening to a message from the eircom mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Registering and de-registering handsets . . . . . . . 36

Automatic registration: eircom 5010, 5010a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Manual registration: eircom 5010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Manual registration: Other eircom / Siemens handsets with GAP functionality . . . . 37
De-registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Page handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using several handsets . . . . . . . . . . . . . . . . . . . . . 38

Internal calls, ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Changing the name of a handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Changing a handset's internal number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Internal consultation calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Accepting/rejecting call waiting during an internal call . . . . . . . . . . . . . . . . . . . . . . . 40
Handset settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Activate/deactivate Auto Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Adjusting the loudspeaker volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing the ringer tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Activating/deactivating advisory tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Restoring the handset factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Setting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Protecting the telephone from unauthorised access . . . . . . . . . . . . . . . . . . . . . . . . . 46
Repeater support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Restoring the base factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Connecting the base to a PABX . . . . . . . . . . . . . . . 48

Dialling modes and recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Setting pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3
Table of Contents
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Questions and Answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Character set table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Guarantee certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Directory key and speed dial list key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Caller List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / starting.fm / 28.07.2003
Safety Precautions
Safety Precautions !
Only use the power supply unit supplied, as indicated on the underside of
$ the device.
Fit only the recommended rechargeable batteries (page 52) of the same
type! Use no other types of batteries or non-rechargeable batteries, as they
could damage health and cause personal injury.
Ensure correct polarity when fitting rechargeable batteries, and use the bat-
tery type according to these instructions (you will see polarity symbols in the
handset's battery compartments).
The operation of medical appliances may be affected. Be aware of the techni-

cal conditions within the particular environment (e.g. doctor's practice).
The handset may cause an intrusive 'hum' in hearing aids.
Do not install the base in bathrooms or shower rooms (page 50). The handset
and base are not watertight.
Do not use the phone in environments subject to explosion hazard (e.g. auto
paint shops).
Ensure that your eircom handset is accompanied by these instructions when

you give it to others to use.
Dispose of the batteries and phone in accordance with environmental regula-

tions.
5
Preparing to use your phone

The pack contains:
one basestation
one handset,
one power supply unit with power cord,
one telephone cord,
two batteries,
one set of operating instructions.
Installing the base
Hints on installing
The base is designed to be operated in enclosed, dry areas at temperatures ranging
from +5 C to +45 C. Instal the base at a central location in your home, e.g. in the hall.
Never expose the telephone to heat sources, direct sunlight, other

electrical appliances.
W Protect your eircom handset from moisture, dust, corrosive liquids
and vapours.
Range
The base has a range of approx. 300 m outdoors and up to 50 m indoors.
6
Connecting the base
Phone outlet
Cable recess
1.
Phone jack with
Underside of phone cord
base (enlarged
view)
1.
Fit the small jack on the phone cord into the socket in the base (it clips into place),
Place cord in cable recess,
Fit phone jack into phone outlet.
Outlet
Cable recess
2.
Underside of Power supply unit
base (enlarged 230 V with power
view) cord
2.
Insert the small jack on the power cord into the socket on the underside of the base,
Place cord in cable recess,
Plug the power supply unit into your power outlet.
Internal phone jack con- 3 4 1 unassigned
nections: 2 5 2 unassigned
1 6 3 a
4 b
5 unassigned
6 unassigned
Keep the power supply unit plugged in at all times to ensure your
phone is ready for use whenever you need it.
i If ever you purchase a phone cord from a store, ensure that the phone
conductors are correctly connected (3-4 connection).
7
Preparing to use the handset
Removing protective film
The display is protected by a plastic film.

Remove the protective plastic film!
Inserting the batteries
Insert the batteries ensuring correct polarity see figure on left.

Position the battery cover so that it is open by around 3 mm, then slide up until it
closes with a click,
To open the battery cover, press on the checkered area and slide down.
Use only the rechargeable batteries recommended by Siemens on

page 52! Never use conventional batteries (non-rechargeable) or other
W battery types as this may cause significant damage to health and prop-
erty. For example, the jacket of the battery could be destroyed (hazard-
ous). The phone could also malfunction or be damaged.
8
Placing the handset into the base and charging the batteries
When you place the handset into the base, the handset will register automatically to
the base. Proceed step by step as follows:
1. Place the handset in the base with the display facing forward.
2. Wait till the handset has registered automatically to the base (page 36): This opera-
tion takes around one minute. While registration is in progress the screen displays
Registering and Base 1 flashes. After registration, you will see a '1' in the top left
of the display this means that the handset has been assigned the first internal
number.
3. Now leave the handset in the base for the batteries to charge the batteries are sup-
plied uncharged. Battery charging is indicated in the top right of the display by the
battery icon = flashing:
= Batteries flat V Batteries 2/3 charged

e Batteries 1/3 charged U Batt. fully charged
Should automatic registration be interrupted, register the handset manually as
described starting on page 36. You can get help from a table containing basic questions
and answers (page 50).
i To register additional handsets , refer to page 36.
For the initial charge we recommend a continuous, uninterrupted charg-

W ing period of five hours, whatever charge status is indicated. After a while
the charge capacity of the batteries will decrease for technical reasons.
The battery charging status is correctly displayed only after uninterrupted charging/
discharging . You should therefore avoid removing the batteries unnecessarily and
ending the charging process prematurely.
Once initial charging is complete, you can replace your handset in the
base after each call. Charging is controlled electronically. This ensures
i that the batteries are charged in a way that optimizes their life.
The batteries heat up during charging. This is normal and not danger-
ous.
Your telephone is now ready for operation.
9
Activating/deactivating the handset

To activate the handset, press the 'end call' key a and hold. You will hear a confirma-
tion tone (rising tone sequence).
To deactivate the handset, press the 'end call' key again a in the idle status and hold
(confirmation tone).
i The handset activates automatically when placed in the base or charger.
Activating/deactivating the keypad lock

You can 'lock' the keys on your handset, e.g. when carrying the unit in your pocket or
bag. This protects the keypad against inadvertent activation.
Press the hash key and hold (confirmation tone).
The icon appears in the display
To deactivate the keypad lock, press the hash key R again and hold (confirmation
tone).
The keypad lock deactivates automatically when you receive a call. It

re-activates when the call is finished.
i When the keypad lock is active, you cannot even call emergency num-
bers.
10
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / guidance.fm / 28.07.2003
Operating the telephone, menu guidance

Keys
Talk/directory key
The talk/directory key c is a rocker key that has two functions. You press the top half
of this key to initiate a call. You press the bottom half of the key to open the directory.
Rocker key:
Top half of the key = Talk key
Bottom half of the key = Directory key
Display keys
The display keys are the horizontal rocker keys just below the display. Depending on
the particular operating situation, their function changes according to whether you
press the left or right side of the key. The current function is shown in the display
directly above the key to which it relates.
Example
u vMENU
Display keys
The various functions are explained below:
Display icon Meaning when key is pressed

[_________] Last number redial key: Open the list of the last 10 numbers you dialed.
[_______]
INT INT key: Open the list of handsets when in idle status.
[_______]
OK OK key: Confirm menu function or confirm an input and store.
[______________]
MENU Menu key: Open the main menu when in idle status
Open a status-dependent menu while making a call.
Scroll up/down.
Move cursor left/right.

[_______] Delete key: Delete input from right to left one character at a time.
11
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / guidance.fm / 28.07.2003
Correcting wrong inputs

After a correct input you will hear a confirmation tone (rising tone sequence), an incor-
rect input is indicated by an error tone (falling tone sequence). You can repeat the
input.
If you have entered incorrect characters in the text, you can correct this as follows:
Deleting characters to the left of the cursor with
To correct a telephone number or text, use the display keys uv to move the cursor
to the right of the incorrect character. Now press the display key . The character is
deleted. Now enter the correct character.
Inserting characters on the right of the cursor
If you have omitted a character, use the display keys uv to go to the place where
you want to insert the character, and key it in.
Idle status
Display in idle status
eircom 5010
1 V
12:50 Time and date
already set
12.04.03
INT MENU
Reverting to idle status from anywhere in the menu

Press the end call key a for around 1 second, or
Press no key: The display automatically reverts to the idle status after 2 minutes.
Changes which you have not confirmed/stored by pressing OK will be rejected.
Menu operation, with "Setting Handsfree Volume" as an example
1. MENU Press the display key. The menu opens.

2. s Press the display key repeatedly until Audio Settings appears on the
screen.
3. OK Confirm with the display key.
4. s Press the display key repeatedly until Handsfree Volume appears on the
screen.
5. OK Confirm with the display key.
6. u v Press the left or right display key to select the required volume (15).
7. OK Now press the display key to confirm the setting.
8. a Press and hold the 'end call' key to return to the idle status.
12
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / TimeCalendar.fm / 24.07.2003
Date and Time
Date and Time

Setting the date and the time
Connecting date and time settings is essential if you want to know exactly when calls/
messages were received.
[_______________]
MENU Open the menu.
[__________] [_____________________________________________________________]
Calender/Clock Select the menu item and confirm.
[_________]
OK
[_____________________________________________________________]
Date/Time [__________]
OK Confirm.
Enter the date:
[________]
OK Enter the day/month/year and confirm.
Example: For the 20.05.2003, enter
2QQ5QI.
Enter the time:
[________]
OK Enter hours/minutes and confirm.
Example: For 9.35 a.m., enter QOI5.
Only when the 12-hour display is selected:
[__________] [_________]
OK Select the half of the day and confirm.
Long press (back to idle status).
Changing the time mode

You can choose between the 12 hour and the 24 hour display (factory setting) for the
time (a.m. = 1st half of the day; p.m. = 2nd half of the day).
[_______________]
MENU Open the menu.
[__________] [_____________________________________________________________]
Calender/Clock Select the menu item and confirm.
[_________]
OK
[__________] [_____________________________________________________________]
Time Mode Select the menu item and confirm.
[_________]
OK
either ...
[__________] [_____________________________________________________________]
24 hour Select the menu item and confirm ( = On).
[_________]
OK
or ...
[_____________________________________________________________]
12 hour [__________]
OK Confirm ( = On).
13
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / telephony.fm / 28.07.2003
Making calls
Making calls
Making external calls and ending a call
External calls are calls into the public telephone network.
Enter the telephone number and press the top half
of the key. The number is dialled.
End the call:
Press the end call key.
You can also press the top half of the c key first (you hear a ring
i tone) and then enter the number.
You can use the end call key a to cancel the dialling operation.
Inserting a dialling pause

You can insert a dialling pause between the prefix and the actual telephone number.
To do this, press S for around 2 seconds. Now enter the telephone number.
i To call another handset, see the description on page 38.
Answering a call
Your handset rings, the call is displayed on the screen and the handsfree key d
flashes. Press the top half of the c key to take the call. If the handset is in the base/
charger and the Auto Answer function is activated (page 41), then you just need to lift
the handset out of the base/charger to take the call.
If the ringer is intrusive, press P for around 1 second. This will silence
i the ringtone. You can take the call so long as it is still displayed on the
screen.
14
Making calls
Calling Line Identification

When you get a call, you will see the caller's number (if you have saved the name in your
address book - see page 19) displayed on the screen.
Preconditions:
1. You have asked eircom on 1901 for the caller's number (CLIP) to be displayed on
your handset screen.
2. The caller has asked their network provider for their number to be identified (CLIP).
CLIP Calling Line Identification Presentation
Screen display with CLIP
With calling line identification, the caller's telephone number is displayed on the hand-
set screen. If you have stored an entry for this number is your directory, then that entry
will be displayed instead of the number, e.g. 'Anna'.
Ringer symbol
1234567890 Telephone number or 'Anna'
The screen displays External Call if the number is not identified.

The screen displays Withheld if the caller withholds his number (page 17), or has not
requested CLI.
Handsfree
Activating/deactivating handsfree
Activate while dialling:

Enter the number and press the handsfree key.
Activate during a call:
Press the handsfree key.
Deactivate handsfree:
Press the top half of the key.
As soon as you terminate the handsfree mode you switch to 'earpiece mode' and con-
tinue the call on the handset.
If you wish to place the handset in the base during a call you must
press the handsfree key d and hold it down while you position the
i handset in the base.
You should inform your caller that you intend to use the handsfree
function before you activate it.
15
Making calls
Adjusting the volume while in handsfree mode

A call is in progress and handsfree is activated.
Press the handsfree key again.
[_______] [_______ ] Decrease or increase the volume.
[_______]
OK Now press the display key to store the setting.
Handset muting
You can mute your handset during external calls, e.g. if you wish to talk confidentially
to another person in the room. The external caller cannot hear your conversation during
this time (hold melody). You do not hear your caller either.
[_______]
INT Open list of handsets. The call is 'held' (wait melody).
[_______]
OK Cancel muting:
[_______________]
MENU Press the display key to open the menu.
[__________] [_____________________________________________________________]
******Back****** Select and confirm, or press the end call key a.
[_________
OK ]
16
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / SAG_T-Net-LM.fm / 28.07.2003
Select Services
Select Services
Select services are products that eircom offer on the network. These services are avail-
able if you call eircom on 1901.
Function that is set for the next call

Before you carry out the procedure described below, press: MENU (open menu);
s Select Services OK. When the procedure is complete, a code will be sent which is dis-
played on your handset's screen.
Withhold Calling Line Withhold Number OK
Identification once (CLIR): ~ (enter number) OK
Functions that are set for all subsequent calls

Before you carry out any of the procedures described below, press: MENU (open
menu); s Select Services OK; s For All Calls OK. When a procedure is complete, a
code will be sent which is displayed on your handset's screen.
You can exit the particular procedure by pressing the end call key a after the confir-
mation from eircom.
Activate/deactivate call s Call Waiting OK
waiting (in external call only): On OK or s Off OK
17
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / SAG_T-Net-LM.fm / 28.07.2003
Select Services
Functions during a call

Initiate ringback: You hear the busy tone: MENU; s Ringback OK
Initiate three way calling: You toggle with two callers:

MENU; s Conference Call OK
End three way calling:
With one caller: MENU; s End Conference OK
s (switch to caller if necessary)
MENU; s End Active Call OK
With both callers: a
Toggling: st (switching between two callers)
End toggling:
MENU; s End Active Call OK
Accept call waiting: MENU; Accept Call Waiting OK

Reject call waiting: MENU; sReject Call Waiting OK
MENU; s Select Services OK.

Cancel ringback: s Cancel Ringback OK
18
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / Directories.fm / 28.07.2003
Using the directory and other lists

Directory and speed dial list
You can store up to 50 entries max. in the directory and the speed dial list (depending
on the size of individual entries).
The directory makes dialling easier for you. To open the directory, press the bottom half
of the h key.
The speed dial list is a special directory in which you can store particularly important
numbers such as private telephone numbers . You open the speed dial list with the C
key.
The speed dial list is operated in just the same way as the directory.
Please refer to the Character Set Table (page 53) to see how to enter
text correctly.
i You can enter up to 32 digits for a number and up to 16 letters for a
name.
Turn to page 14 for instructions on how to insert a dial pause.
Storing a telephone number in the directory
Open directory.
[_______________]
[_____________________________________________________________]
New Entry [__________]
OK Confirm.
[________]
OK Enter the number and confirm.
[_________________]
MENU Enter the name and press the display key.
[_____________________________________________________________]
Save Entry [__________]
OK Confirm. The entry is stored.
If your phone is connected to a PABX you may have to enter the access
i code (outside line code) as the first digit of your directory entry (refer to
the operating instructions of your PABX).
19
Storing a telephone number in the speed dial list

You can assign a digit (0, 29) to up to nine entries on your speed dial list. When you
press and hold one of these digits, e.g. '3', and press the top half of the c key you are
immediately connected to the telephone number that is assigned '3'.
Open the speed dial list.
[______________]
[_____________________________________________________________]
New Entry [__________]
OK Confirm.
OK
[_______] Enter the number and confirm.
MENU]
[______________ Enter the name and press the display key.
[_____________________________________________________________]
Save Entry [__________]
[______________]
[__________] [_____________________________________________________________]
Shortcut Select the menu item and confirm.
[_________
OK ]
[__________] [_____________________________________________________________]
Shortcut: 2 Select the digit and confirm.
[_________
OK ]
i Speed dial digits cannot be assigned more than once at a time.
Dialling with the directory/speed dial list
or Open directory or speed dial list

either ... Scroll to the entry:
Select entry.
Press the top half of the key. The number is dialled.
or ... Enter the first letter:
Enter the first letter of the name.
Select the desired entry.
Press the key. The number is dialled.
20
Changing an entry in the directory/speed dial list

[__________] [________________]
MENU Select the entry and press the display key.
[__________] [_____________________________________________________________]
Edit Entry Select the menu item and confirm.
[_________]
OK
[_______]
OK Change the number and confirm.
[________________]
MENU Change the name and press the display key.
[_____________________________________________________________]
Save Entry [__________]
Deleting a single entry or directory/speed dial list

[__________] [________________]
MENU Select the entry and press the display key.
either ... Delete a single entry:
[__________] [_____________________________________________________________]
Delete Entry Select the menu item and confirm.
[_________]
OK
or ... Delete the entire directory/speed dial list:
[__________] [_____________________________________________________________]
Delete List Select the menu item and confirm.
[_________]
OK
[________]
OK Press the display key to confirm the prompt.
... then
Adding a displayed telephone number to the directory

When a telephone number appears in the display (CLIP) you can add it to your directory.
This can be done while dialling from the last number redial list, from the caller
list during a call.
[_______________]
[__________] [_____________________________________________________________]
Copy to Directory Select the menu item and confirm.
[_________]
OK
[________]
OK Confirm the telephone number.
[______________]
MENU If required, enter the name and press the display key.
[_____________________________________________________________]
Save Entry [__________]
21
Picking a phone number from the directory/speed dial list

If you are prompted to enter a telephone number while you are operating your tele-
phone, you can use the directory to do this.
Precondition: The entry field for external telephone numbers is displayed.
[_________] [_________]
OK Select the entry and confirm.
The telephone number is added to the entry field.
Last number redial list

The last number redial list contains the ten last dialed numbers. If names have been
stored for these numbers in the directory, then both the names and the numbers will
be displayed. You can use the last number redial list to redial the telephone numbers.
Dialling telephone numbers from the last number redial list
]
[_________ Open the last number redial list.
[_________ ] Select an entry and press the top half of the key.
The number is dialed.
To add or change the telephone number, press MENU and confirm

Use Number with OK.
i To add a telephone number from the last number redial list to the
directory (page 21), press MENU, Copy to Directory OK.
Deleting a single telephone number or the entire last number redial list
]
[_________ Open the last number redial list.
[_________] [_________________]
MENU Select an entry and open the menu.
either ... Delete a single telephone number:
[__________] [_____________________________________________________________]
Delete Entry Select the menu item and confirm.
[_________
OK ]
If there still entries on the list, press the key and hold
(back to idle status).
or ... Delete the entire last number redial list:
[__________] [_____________________________________________________________]
[_________
OK ]
22
Opening lists with the Message key

You can use the Message key f to open the following lists:
1. SMS list,
2. Caller list.
You hear an advisory tone as soon as a new entry (SMS) arrives in one or more lists. The
icon appears in the display.
When you press the f key and open one of the lists, the icon disappears after you
quit the list even though there are still new entries in one of the other lists.
The following lists are displayed when you press f:
If only one list has new entries, you will see the first new entry in that list.
If several lists have new entries, those lists are offered for your selection.
If there are no new messages in any of the lists, then all the lists are offered for your
selection.
If calls are stored in the eircom call answering mailbox the led will flash. This service
may be available in the future.
Caller list
The numbers of the last 10 calls are saved in the caller list. The oldest entry is deleted
when the caller list is full and new entries are added.
Precondition: The caller's number has been identified (page 15).
Here is an example of how the caller list (Calls List: ) appears in the display:
Number of new entries in the list
Calls List: 01+05 Number of old, read entries in the list
Opening the caller list

New calls (caller list) are shown on screen by the letter icon and messages are indi-
cated by an advisory tone.
Open the caller list.

[__________] [_____________________________________________________________]
Calls List: 01+02 Select the menu item and confirm.
[_________]
OK The entry received last is displayed.
Select entry.
An entry is deleted by pressing MENU,

i Delete Entry OK.
23
Calling back a caller

Precondition: The caller's number has been identified (page 15).
Open the caller list and select an entry. Now:
Press the top half of the key.
The telephone number is entered in the last number redial list.
Viewing an entry in the caller list, adding a number to the directory

You can view the time when a call arrived and add the telephone number to your direc-
tory.
Open the caller list and select an entry. Now:
[______________]
either ... Copy telephone number to the directory:
[__________] [_____________________________________________________________]
[_________
OK ]
[_______]
OK Confirm the number.
[________________]
MENU Enter name and open the menu.
[_____________________________________________________________]
Save Entry [__________]
or ... View the date and time of arrival:
[__________] [_____________________________________________________________]
Date and Time Select the menu item and confirm.
[_________
OK ]
or ... View information whether new or old:
[__________] [_____________________________________________________________]
Status Select the menu item and confirm (page 24).
[_________
OK ]
... then
The entry's status is displayed like this: :

2 V
1234567890
New
OK
The following status messages are used:
New call The call is new in the list.

Old call The call is old in the list.
Calls received The call was answered.
24
Deleting the caller list

Open the caller list (page 23). Now:
[_______________]
[__________] [_____________________________________________________________]
Delete List Select the menu item and confirm. Caution: All old
[_________]
OK and new entries will be deleted.
Deleting a single entry from the caller list

Open the caller list and select an entry (page 23). Now:
[_______________]
[_____________________________________________________________]
Delete Entry [__________]
OK Confirm.
25
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / SMS_Neutral_so.fm / 28.07.2003
SMS (Text Messages)
SMS (Text Messages)

You can send and receive SMS text messages (Short Message Service) with your hand-
set. You can write, edit, read, delete or forward text messages from any registered
handset that has SMS functionality. When several handsets are in use at any one time,
only one handset can access the SMS function.
Please remember that when the SMS function is active the first ring is
i muted (page 43).
Storage capacity
The number of text messages that can be stored in the base depends on the size of the
messages. The memory is used for the incoming and draft message lists. When the
memory is full, you are prompted to delete messages.
Before you can send and receive text messages

Calling Line Identification (page 15) must be enabled for your phone line. Check
with eircom on 1901 to make sure that this service is activated on your phone line.
To receive text messages you must be registered with eircom (i.e. you need to send
a text message).
Ask eircom on 1901
what charges are billed for sending and receiving a text message,
which mobile phone operators you can send text messages to and which mobile
phone operators you can receive text messages from,
which functions your SMS service offers.
Activating and deactivating the send message and receive message

functions
The text message 'send' and 'receive' functions are already activated when you purchase
your phone.
[______________]
MENU Open the menu.
Initiate the setting.
either ... Deactivate "send/receive SMS":
[_______]
OK Enter and confirm.
or ... Activate "send/receive SMS":
[_______]
OK Enter and confirm.
The settings which you have made for sending and receiving text messages (e.g. the
call numbers of the SMS centres) and the entries in the incoming and draft message lists
are saved when you switch off your phone. They are reactivated automatically when
you switch on your phone again.
When you switch off you cannot send or receive any text messages with your phone.
26
SMS (Text Messages)
Entering the number of an SMS centre, changing the send centre

You can enter and change the call numbers of an SMS centre. A previously stored SMS
centre number is changed by being overwritten.
[_______________]
[_____________________________________________________________]
SMS [__________]
OK Confirm.
[__________] [_____________________________________________________________]
Settings Select the menu item and confirm.
[_________]
OK
[_____________________________________________________________]
Service Centres [__________]
OK Confirm.
[__________] [_____________________________________________________________]
SMS Centre No. 3 Select and confirm, e.g. SMS Centre No. 3.
[_________]
OK U
SMS Centre No. 3
t s OK
[_____________________________________________________________]
Active Send Service Centre [__________]
OK If necessary, confirm to activate the SMS centre as
the send centre ( = On). Only one SMS centre can
be activated as the send centre. Any centre other
than SMS centre no. 1 will only be used as the send
centre for the next message.
Enter the number of the SMS centre:
[__________] [_____________________________________________________________]
SMS Select the menu item and confirm.
[_________]
OK
[_______]
OK Enter the number and confirm.
27
SMS (Text Messages)
Text message sending and the draft message list

If a call arrives while you are writing a message, then the message is automatically
saved to the draft message list. You can take the call and finish writing or send the
message later (page 29).
Text messages that cannot be sent are assigned an error status (page 34) and are put in
the incoming message list.
Text messages are only stored automatically if sending is interrupted. If you wish to
store a message then you must do so before it is sent.
Your phone line is busy while your text message is being transmitted to the SMS send
centre. The message Transferring SMS! is displayed on all handsets.
Writing text messages
A single text message can be up to 160 characters long.
If Russian or Greek is set as the display language on your handset, then you must
change this setting before you write a text message (page 41). Select a display lan-
guage that uses the Roman character set (e.g. Deutsch or English). The service pro-
vider cannot deliver text messages with Greek or Cyrillic characters. You write a text
message like this:
[______________]
[_____________________________________________________________]
SMS [__________]
OK Confirm.
[_____________________________________________________________]
Write Message [__________]
OK Confirm. The input field opens.
Enter the text.
U
with tomorrow Text of the message
u v MENU
Please refer to the Character Set Table (page 53) to see how to enter
text correctly.
Use 1 to insert a space, and P to toggle between upper case,
i lower case and digits (page 53).
You can find out how to correct text on page 12.
If you receive a text message that is incomplete (e.g. because your
phone's memory is full), you will see a message.
Storing text messages

Precondition: You have written a text message (page 28) and the input field is open.
[______________]
[__________] [_____________________________________________________________]
Save Text Confirm. You can now send your text message
[_________
OK ] (page 29).
The message is stored in the draft message list. It can be retrieved and sent at a later
time (page 29).
28
SMS (Text Messages)
Sending a text message without saving it

Precondition: You have written a text message (page 28) and the input field is open.
[_______________]
[_____________________________________________________________]
Send Text [__________]
OK Confirm.
[_____________________________________________________________]
SMS [__________]
OK Confirm.
either ...
Enter the recipient's number (with prefix).
or ... Select a number from the directory:
Open the directory.
[__________] [_________]
OK Select the entry and confirm. The number appears in
the display.
... next
[________]
OK Confirm. The message is sent.
Examples of call number inputs:
01 2345678 A national telephone number within the eir-

com network
085 123456 A number within the mobile phone network
Opening the draft message list

The draft message list shows you:
Text messages which you saved before you sent them (page 28),
Text messages you could not send because, for example, you were interrupted by
an incoming call while you were writing the message.
These messages are stored until you delete them.
[_______________]
[_____________________________________________________________]
SMS [__________]
OK Confirm.
[__________] [_____________________________________________________________]
Outgoing Select the menu item and confirm.
[_________]
OK
29
SMS (Text Messages)
Reading and deleting text messages in the draft message list

Precondition: You are in the draft message list (page 29).
[_________] [_________] Scroll to another text message if necessary.
[______________]
either ... Read SMS:
[_____________________________________________________________]
Read SMS [__________]
OK Confirm. Use s to view the continuation of the
text message in the display.
or ... Delete SMS:
[__________] [_____________________________________________________________]
Delete Entry Select the menu item and confirm. The SMS is
[_________
OK ] deleted.
Deleting the entire draft message list

This function deletes all the messages in the draft message list.
Precondition: You are in the draft message list (page 29).
[______________]
[__________] [_____________________________________________________________]
[_________
OK ]
[_______]
OK Press the display key to confirm the prompt.
Sending or editing text messages in the draft message list

Precondition: You have opened a text message in the draft message list to read
(page 30).
[______________]
either ... Write and send a new text message :
[_____________________________________________________________]
Write Message [__________]
OK Confirm. The input field is opened (page 28).
or ... Edit and send a stored text message:
[__________] [_____________________________________________________________]
Use text Select the menu item and confirm. The input field is
[_________
OK ] opened with the contents of the stored text mes-
sage.
You can now send the message as described on page 29.
30
SMS (Text Messages)
Receiving text messages and the incoming message list

New text messages are indicated by the icon .
In the incoming message list the new (unread) messages are before the old messages.
New and old messages are sorted according to their time of arrival: oldest new mes-
sage, ... , newest message, oldest old message, ..., newest old message.
You can view the date and time (as transmitted by the message centre) of every mes-
sage.
Opening the incoming message list

The incoming message list shows you:
All received messages,
Messages that could not be sent despite several attempts. These messages are all
stored with an error status (page 34).
Opening with the message key
The message list is displayed for example as follows:
Number of new entries in the list
SMS: 01+05
Number of old, read entries in the list
Precondition: There is at least one new message in the list.
Press the message key.
[_____________________________________________________________]
SMS: 01+05 [__________]
OK If necessary, select and confirm. The incoming mes-
sage list is opened and the first new message is dis-
played.
The display tells you if the message memory is full. Press OK to confirm and delete indi-
vidual messages you no longer require from the incoming and draft message list.
Opening with the menu
[_______________]
[_____________________________________________________________]
SMS [__________]
OK Confirm.
[__________] [_____________________________________________________________]
Incoming 01+05 Select the menu item and confirm.
[_________]
OK
Viewing the date and time of an incoming text message

You can view the date and time of an incoming text message.
Press the message key.
[_____________________________________________________________]
SMS: 01+02 [__________]
OK Confirm.
[__________] [_________________]
MENU Select SMS and press the display key.
[__________] [_____________________________________________________________]
Date and Time Select the menu item and confirm. The telephone
[_________]
OK number, date and time are displayed.
[________]
OK Back to the list.
31
SMS (Text Messages)
Reading and deleting text messages in the incoming message list

Precondition: You have opened the incoming message list (page 31).
[_________] [__________________]
MENU Select SMS and press the display key.
either ... Read SMS:
[_____________________________________________________________]
Read SMS [__________]
OK Confirm. Use s to view the continuation of the
text message in the display.
or ... Delete an individual SMS:
[__________] [_____________________________________________________________]
Delete Entry Select the menu item and confirm. The next SMS is
[_________
OK ] now displayed.
A new message which you have read acquires the status Old.
Deleting the entire incoming message list
This function deletes all new and old text messages in the incoming message list.
Precondition: You have opened the incoming message list (page 31).
[______________]
[__________] [_____________________________________________________________]
[_________
OK ]
[_______]
OK Press the display keyto confirm the prompt.
Replying to or forwarding text messages
While you read a text message you can use the following functions:
[______________]
either ... Reply to an incoming message:
[_____________________________________________________________]
Reply [__________]
OK Confirm. You can reply to the message immediately
in the input field.
or ... Answer "Yes":
[__________] [_____________________________________________________________]
Answer: Yes Select the menu item and confirm.
[_________
OK ]
or ... Answer "No":
[__________] [_____________________________________________________________]
Answer: No Select the menu item and confirm.
[_________
OK ]
or ... Edit the incoming message and return it:
[__________] [_____________________________________________________________]
Use text Select the menu item and confirm. The input field is
[_________
OK ] opened with the contents of the incoming message
(page 28).
Edit text as required.
... next
32
SMS (Text Messages)
[_______________]
[_____________________________________________________________]
Send [__________]
OK Confirm and then send the message as described on
page 29.
or ...
[__________] [_____________________________________________________________]
Save Text Select the menu item and confirm.
[_________]
OK
To forward a text message, open the menu with MENU and select the Send option.
Now send the message as described on page 29.
Adding the telephone number of a text message to the directory

You can add the telephone number to your directory.
Precondition: You have opened the incoming message list and selected a message
[_______________]
[__________] [_____________________________________________________________]
[_________]
OK
[________]
OK Confirm the telephone number.
Enter a name (up to 16 characters) (for inputting
text see page 53).
[_______________]
[_____________________________________________________________]
Save Entry [__________]
OK Confirm.
The number must be stored in the directory together with its area code
i (prefix) so that it can also be used for sending text messages.
Text messages to PABX's

You can only receive a text message when the Calling Line Identification is forwar-
ded to the extension of the PABX (CLIP).
The CLIP of the number of the SMS centre is evaluated in the eircom 5010 handset.
If your phone is connected to a PABX, you may have to prefix the number of the SMS
centre with the access code (this depends on your PABX). If in doubt, you can test your
PABX by sending a text message to your own number and putting the access code
before the number of the SMS centre. If you do not receive the message, send another
one, this time without the access code.
When you send messages, your sender number may be sent without your extension
number. The recipient cannot reply to you directly in this case.
Text messages can only be sent and received through ISDN exchanges with the MSN
number assigned to your base.
33
SMS (Text Messages)
Errors when sending and receiving a text message
Errors when sending a text message

The following error codes are displayed:
Error Code Description

E0 Calling Line Identification permanently withheld (CLIR).
Calling Line Identification not activated.
FE Error occurred during message transfer.
FD Connection to SMS centre failed.
Text messages cannot be sent or received if the number of the SMS
centre is missing or incorrectly stored. Check that the fixed network
number of the SMS centre has been correctly stored.
Errors when receiving a text message

You cannot receive text messages under the following conditions:
The CLIP service (Calling Line Identification Presentation) is not activated for your
phone line,
The memory (incoming and draft message lists) is full. A message appears on the
screen if your phone cannot receive any more text messages for this reason.
Self-help with error messages
Error Message Possible Cause Remedy

You cannot send messages. You have not requested the Ring eircom on 1901.
CLIP service (Calling Line Iden-
tification Presentation).
Message transfer was inter- Re-send the message.
rupted (e.g. by a call).
The number of the SMS centre Manually enter the correct
selected as the send centre is number.
not entered or is incorrect.
You receive a message whose Your phone's memory is full. Delete some old messages
text is incomplete. (page 32).
The message is received as a The handset is not registered in Send a text message to any
'text to speech' message. eircom's SMS database as number to activate.
having fixed network SMS
functionality.
34
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / SAG_ T-netbox.fm / 28.07.2003
Using eircom call answering
Using eircom call answering

eircom call answering is the answering service provided -please contact eircom on 1901
to set up this service.
Configuring eircom call answering for fast access

When fast access is configured, by pressing and holding the 1 select the eircom call
answering directly.
With the eircom 5010 the eircom call answering is preconfigured for fast access. You
just need to dial 171.
Entering the eircom call answering mailbox number and configuring the eircom
call answering for fast access
[_______________]
[__________] [_____________________________________________________________]
Voice Mail Select the menu item and confirm.
[_________]
OK
[_____________________________________________________________]
Set Key 1 [__________]
OK Confirm.
[_____________________________________________________________]
Network Mailbox [__________]
OK Confirm.
[_______]
OK Key in the number of the eircom mailbox
(171) and confirm ( = On).
[_____________________________________________________________]
Save Text [__________]
This setting is now valid for all registered handsets.
Calling the eircom mailbox

Press 1 and hold. This connects you directly to eircom call answering.
If you now press the d key, you can 'open listen' to the announcements of your eircom
mailbox and operate your eircom mailbox easily and conveniently.
Listening to a message from the eircom mailbox

When a message arrives for you, you get a call from your eircom mailbox. If you have
requested Calling Line Identification, the displays shows the number 171. If you accept
the call, the new messages are played back. If you do not accept the call, 171 will be
stored in the list of missed calls and the message key flashes (page 23).
35
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / registration.fm / 28.07.2003
Registering and de-registering handsets

You can register up to six handsets on your base.
An eircom 5010 or 5010a that is not yet registered on a base is registered automati-
cally. Handsets of the Gigaset 2000/3000 families and the eircom 4012 and 5012a and
non eircom handsets must be registered manually.
An eircom 5010 handset can be registered on one base.
Automatic registration: eircom 5010, 5010a

Any handset that is not registered on a base can be registered automatically.
To register your handset for the first time, place it in the base with the display facing
forward. Registration takes around one minute. While registration is in progress the
screen displays Registering Base 1 and Base 1 flashes. The handset will be automati-
cally assigned the lowest unassigned internal number (16). You will see this number
in the top left of the display after registration, e.g. '1' . This means that the handset has
been assigned the first internal number. If all internal numbers 16 have been assigned
(six handsets are registered on a base), the number 6 is overwritten if that handset is in
idle status.
Automatic registration is not possible when the base on which you

wish to register the handset is being used to make a call.
i You can give a registered handset a different internal number
(page 39) or a different name (page 38).
Manual registration: eircom 5010

You must initiate handset registration on the handset and on the base.
1. On the handset
[______________]
[__________] [_____________________________________________________________]
Handset Settings Select the menu item and confirm.
[_________
OK ]
[__________] [_____________________________________________________________]
Register Handset Select the menu item and confirm.
[_________
OK ]
[_______]
OK Enter the system PIN of the base
(the default is 0000) and confirm.
Base 1 flashes in the display when the system PIN has been entered.
2. On the base
Press the Registration/Paging key on the base for

approx. 3 sec. . Registration is initiated.
The base search is cancelled after 60 seconds. If registration has not completed inside
this time, repeat the process.
When registration is successful, the handset is automatically assigned the lowest unas-
signed number, as described in the chapter 'Automatic Registration' (page 36).
36
Manual registration: Other eircom / Siemens handsets with GAP

functionality
This section describes how to connect handsets belonging to the eircom, Gigaset fam-
ilies, 5010, 5010a, 5012 and 5012a or handsets of other devices with GAP functionality
to your eircom 5010.
1. On the handset
Start to register the handset as described in its operating instructions.
2. On the base
Press the Registration/Paging key on the base until

you hear the tone. Registration is initiated.
The next unassigned internal number (16) is automatically assigned to the handset as
it is registered. If all the numbers have been assigned, number 6 is overwritten provided
the handset is in idle status.
De-registering handsets
You can de-register any registered handset from any other registered 5010 handset.
[________]
INT Open list of handsets.
[__________] [________________]
MENU Select the handset you wish to de-register (your own
handset is checked ) and press the display key.
[__________] [_____________________________________________________________]
De-register Handset Select the menu item and confirm.
[_________]
OK
[_______]
OK Enter the current system PIN (the default setting is
0000) and confirm.
[________]
Page handset
If you have mislaid your handset you can 'page' it with the help of the base. The Regis-
tration/Paging key is on the base to the right of the handset shell.
Press the Registration/Paging key on the base. All
handsets will ring together ('Paging').
End paging:
Press the Registration/Paging key on the base again
or press the top half of the c key.
Paging ends automatically after 30 seconds.

i The paging call can be heard even when the ringer is switched off.
37
Using several handsets

Internal calls, ending a call
Internal calls are calls with other handsets that are registered on the same base. These
calls are free.
Calling a specific handset or all handsets simultaneously.
[_______]
either ... Call a specific handset:
[__________] Select the handset (your own handset is checked )
and press the top half of the key.
or ... Call all handsets ('call all'):
Press the star key. All handsets are called.
... then End the call:
To call a specific handset, you can also enter the handset number
after you open the list, e.g. INT 2.
i If you receive a call during an internal call or group call, the group call
is not interrupted.
Changing the name of a handset

The names 'INT 1', 'INT 2' etc. are assigned automatically. However you can change
these names, e.g. to 'Anna' etc. (10 characters maximum). The changed name is dis-
played in the list of every handset.
[_______]
[_________] [________________]
MENU Select the handset and press the display key.
[__________] [_____________________________________________________________]
Change Handset Name Select the menu item and confirm.
[_________
OK ] Delete the old name with .
[_______]
OK Enter the name and confirm.
38
Changing a handset's internal number

A handset is automatically assigned the lowest unassigned number when it is regis-
tered (page 36). You can change the internal number of all registered handsets
(16).
[________]
[_______________]
[_____________________________________________________________]
Edit Handset Number [__________]
OK Confirm.
[__________] Select a handset.
[_______]
OK The current number flashes. Enter the new internal
number (16) and confirm. The handset's old
number is overwritten.
You will hear the error tone if you assign an internal number twice (a fall-
i ing tone sequence). Repeat the process with an unassigned number.
Transfer call to another handset

You can transfer (connect) an external call to another handset..
[________]
The external caller hears the wait melody.
[__________] Select one specific handset or Calling all handsets
and press the top half of the key. When the internal
user answers, announce the external call.
Press the end call key. The external call is transferred
to the other handset.
Instead of announcing the call, you can also press the end call key a. If
i the internal user does not answer or is busy, the call will come back to you
automatically (Recall appears in the display).
39
Internal consultation calls

You can call an internal user (e.g. to consult with him) while speaking with an external
caller. You are automatically reconnected to the external user when you end this inter-
nal call.
[_______]
The external caller hears the wait melody.
[__________] Select handset and press the top half of the key.
End consultation call:
[______________]
[_____________________________________________________________]
Back [__________]
OK Confirm. You are reconnected to the external caller.
Accepting/rejecting call waiting during an internal call

If you get an external call while conducting an internal call, you will hear the call wait-
ing tone (short tone). The caller's number will appear in the display if Calling Line Iden-
tification is enabled.
either ... Cancel internal call, accept external call:
[______________]
[_____________________________________________________________]
Accept Call Waiting [__________]
OK Select the menu item and confirm. The internal call
is ended. You are connected to the external caller.
or ... Reject external call:
[__________] [_____________________________________________________________]
Reject Call Waiting Select the menu item and confirm. The call waiting
[_________
OK ] tone is deactivated. You are still connected to the
internal caller.
If you reject the call waiting tone on your handset, it can still be heard on
other registered handsets.
Also
i To put the first caller on hold and answer the new caller, press R 2.
To switch back to your original caller press R 2 again.
You can switch between calls as often as you like.
To finish the call you are on and talk to the other caller, press R 1.
40
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / settings_bs_hs.fm / 28.07.2003
Handset settings
Handset settings
Your handset is preconfigured, but you can change the settings to suit your individual
requirements.
Changing the display language

You can view the display texts in different languages.
[_______________]
[__________] [_____________________________________________________________]
[_________]
OK
[__________] [_____________________________________________________________]
Language Select the menu item and confirm. The current lan-
[_________]
OK guage is checked (the default setting is English).
[__________] [_________]
OK Select a language and confirm.
If you set the wrong language in error, press MENU M 2. Now

select the correct language with s and press OK to confirm your
i choice.
When you change the display language the character set can change
too, e.g. for Russian.
Activate/deactivate Auto Answer

If you have activated this function, when you get a call you can simply lift the handset
out of its base or the charger without having to press the Talk/Directory key c (the
default setting is On).
[_______________]
[__________] [_____________________________________________________________]
[_________]
OK
[_____________________________________________________________]
Auto Answer [__________]
OK Confirm to deactivate or activate the function
( = On).
41
Handset settings
Adjusting the loudspeaker volume

You can adjust the earpiece volume on three levels (13) and the handsfree volume on
five levels (15) you can even do this while an external call is in progress.
[______________]
[__________] [_____________________________________________________________]
Audio Settings Select the menu item and confirm.
[_________
OK ]
[_____________________________________________________________]
Earpiece Volume [__________]
OK Confirm. You hear the current setting.
[_________] [_________]
OK Select the earpiece volume and confirm.
[__________] [_____________________________________________________________]
Handsfree Volume Select the menu item and confirm.
[_________
OK ]
[_________] [_________]
OK Select the handsfree volume and confirm.
Changing the ringer tone

You can set the ringer individually for an internal or an external call.
A range of options are available:
Six volume levels:
Five volume levels (15; e.g. volume level 2 = ),
'Crescendo' call (6; the volume increases with each ring tone = ).
Ten melodies (110; melodies 13 are the 'classical ringer tones').
Changing the ringer melody
[______________]
[__________] [_____________________________________________________________]
[_________
OK ]
[__________] [_____________________________________________________________]
Ringer Melody Select the menu item and confirm.
[_________
OK ]
either ... For external calls:
[_____________________________________________________________]
External Calls [__________]
OK Confirm.
or ... For internal calls:
[__________] [_____________________________________________________________]
Internal Calls Select the menu item and confirm.
[_________
OK ]
... then
[_____________________________________________________________]
Melody 1 [__________]
OK Confirm melody, e.g. Melody 1 ( = On).
42
Handset settings
Adjusting the ringer volume
[_______________]
[__________] [_____________________________________________________________]
[_________]
OK
[__________] [_____________________________________________________________]
Ringer Volume Select the menu item and confirm.
[_________]
OK
[__________] [_________]
OK You hear the current volume. Select volume and
confirm.
Ringer off/on
All handsets ring when there is an incoming call. You can cancel the ringer on your
handset before you answer a call or when the handset is in idle status; the ringer can be
cancelled permanently or just for the current call.
Cancelling the ringer permanently:
Press the star key and hold until the ringer cannot be
heard any longer. The ringer is not permanently
cancelled. The icon appears in the display.
Re-activating the ringer:
Press the star key and hold.
To cancel the ringer in the idle status, press the key and hold until the icon appears.
The ringer cannot be re-activated while an external call is in progress.
To cancel the ringer for the current call, press the display key MENU
i and then Silent.
First ring muting off/on

The first ring is muted so that you are not disturbed by an incoming text message. You
can change this setting so you can hear the first ring too.
[_______________]
Press keys.
either ... You want to hear the first ring:
Press the key.
or ... You do not want to hear the first ring:
Press the key.
[________]
OK Confirm.
If you accept a call on the first ring and if this ring has announced a text
i message, then the message will be lost (page 43).
43
Handset settings
Activating/deactivating advisory tones

Your handset uses 'advisory tones' to tell you about different activities and statuses. The
following advisory tones can be activated and cancelled individually (the default setting
is On).
Key click: Every key press is confirmed.
Acknowledge tones:
Confirmation tone (rising tone sequence): at the end of an input/setting, when
the handset is placed in the base and when an SMS or a new entry arrives in the
caller list
Error tone (a falling tone sequence): with incorrect inputs.
End of menu tone: when scrolling at the end of a menu.
Battery tone: The batteries must be charged.
[______________]
[__________] [_____________________________________________________________]
[_________
OK ]
[__________] [_____________________________________________________________]
Advisory Tones Select the menu item and confirm.
[_________
OK ]
either ... Activate/cancel key click:
[_____________________________________________________________]
Key Tones [__________]
OK Confirm ( = On).
or ... Activate/cancel battery warning tone:
[__________] [_____________________________________________________________]
Battery Low Select the menu item and confirm.
[_________
OK ]
[__________] [_____________________________________________________________]
On Select condition (Off, On, During Call) and confirm,
[_________
OK ] e.g. On (checked ).
Press the 'end call' key briefly to return to the previ-
ous menu level.
or ... Activate/cancel confirmation tones:
[__________] [_____________________________________________________________]
Confirmation Tone Select the menu item and confirm ( = On).
[_________
OK ]
... then
44
Handset settings
Restoring the handset factory settings

You can reset individual settings and changes. Entries in the directory, the caller list and
the speed dial list and the handset's registration on the base will be retained. Press a
to cancel the reset.
[_______________]
[__________] [_____________________________________________________________]
[_________]
OK
[__________] [_____________________________________________________________]
Reset Handset Select the menu item and confirm.
[_________]
OK
[________]
Factory settings of the handset
Earpiece volume 1 page 42

Handsfree volume 3 page 42
Ringer volume 5 page 42
Ringer melody 1 page 42
Auto answer activated page 41
Battery tone/Key click/Confirmation tone activated page 44
Display language English page 41
Last number redial list empty page 22
45
Setting the base
Setting the base

All the settings for the base are made with a registered eircom 5010 handset.
Protecting the telephone from unauthorised access

You can protect your telephone from unauthorised access by saving system settings for
the base with a system PIN which only you know. The system PIN must now be entered
for handset registration/de-registration, restoring factory settings, internal activation or
barring numbers, for example.
Changing the System PIN

You can change the base's 4-digit system PIN (default setting 0000) to a 4-digit PIN
which is known only to you.
[______________]
[__________] [_____________________________________________________________]
Base Settings Select the menu item and confirm.
[_________
OK ]
[__________] [_____________________________________________________________]
System PIN Select the menu item and confirm.
[_________
OK ]
[_______]
OK Enter the current system PIN and confirm. For secu-
rity reasons the input is shown as four asterisks
(****).
[_______]
OK Enter the new system PIN and confirm.
[_______]
OK Repeat the new system PIN and confirm.
Repeater support
With a repeater you can increase the range and reception strength of your base; the
repeater must be registered. To use the repeater you must first activate the repeater
mode. This will cancel any calls that are in progress.
[______________]
[__________] [_____________________________________________________________]
[_________
OK ]
[__________] [_____________________________________________________________]
Additional Features Select the menu item and confirm.
[_________
OK ]
[__________] [_____________________________________________________________]
Repeater Mode Select the menu item and confirm ( = On).
[_________
OK ]
[_______]
46
Setting the base
Restoring the base factory settings

Resetting does not affect the system PIN and handsets are still registered.
[_______________]
[__________] [_____________________________________________________________]
[_________]
OK
[__________] [_____________________________________________________________]
Base Reset Select the menu item and confirm.
[_________]
OK
[_______]
OK Enter the system PIN (the factory setting is 0000)
and confirm.
[________]
Factory settings of the base
Send centre preset according to country page 26

SMS incoming and draft messages list empty page 28
and
page 29
Dialling pause 3s page 49
Pause after recall key 800 ms page 49
Pause after line seizure 3s page 49
Recall 120 ms page 48
Dialling mode DTMF page 48
Fast access 1 eircom call answering without a page 35
number
47
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / pabx.fm / 24.07.2003
Connecting the base to a PABX

The following settings are only needed when your PABX requires them, please refer to
the operating instructions for your PABX.
You cannot send or receive text messages on PABX's that do not support
i Calling Line Identification.
Dialling modes and recall

The current setting is indicated by .
Step 1: Changing the dialling mode

The following dialling modes can be set:
Tone dialling (DTMF).
[______________]
[__________] [_____________________________________________________________]
[_________
OK ]
[__________] [_____________________________________________________________]
[_________
OK ]
[_____________________________________________________________]
Dialling Mode [__________]
OK Confirm.
[_________] [_________]
OK Select the dialling mode and confirm.
Step 2: Setting the recall
[______________]
[__________] [_____________________________________________________________]
[_________
OK ]
[__________] [_____________________________________________________________]
[_________
OK ]
[__________] [_____________________________________________________________]
Recall Select the menu item and confirm.
[_________
OK ]
[_________] [_________]
OK Select recall and confirm.
48
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / pabx.fm / 24.07.2003
Setting pauses
Changing the pause after line seizure

You can set the length of the pause that is inserted between pressing the top half of the
c key and the transmission of the telephone number (the default setting is 3 sec-
onds).
[_______________]
Press keys.
[_______]
OK Enter a number for the length of the pause
(1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.; 4 = 2.5 sec.)
and confirm.
Change pause after Recall key

You can change the length of the pause if your PABX requires this (refer to the operating
instructions for your PABX; the default setting is 800 ms).
[_______________]
Press keys.
[_______]
(1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms)
and confirm.
Changing the dialling pause
[_______________]
Press keys.
[_______]
(1 = 1 sec.; 2 = 2 sec.; 3 = 3 sec.; 4 = 6 sec.)
and confirm.
49
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / appendix.fm / 28.07.2003
Appendix
Appendix
Care
Wipe the base and the handset with a damp cloth (use no solvent) or an antistatic cloth.
Never use a dry cloth as this can cause static discharge!
Contact with liquid !

If the handset should come into contact with liquid, on no account switch the device
on. Remove all batteries immediately.
Allow the liquid to drain out of the device, and then pat all parts of the device dry.
Keep the handset with the batteries removed in a warm, dry place for at least 72 hours.
In many cases, you will then be able to use it again.
Questions and Answers

If you have any questions about the use of your phone, you can contact us 24/7 at
www.my-siemens.com/customercare. You will find the most frequently asked ques-
tions and answers below. You can also call the Siemens helpdesk on 1850 777 277
between the hours of 0900 and 1700 Mon-Fri, or contact eircom on 1901.
What has happened Possible cause Possible solution

when
the display is blank? The handset is not switched on. Press the 'end call' key a for
The batteries are flat. around 2 sec..
Charge or replace the batteries
(page 9).
the handset fails to respond The keypad lock is activated. Press the hash key R for
to a key press? around 2 sec. (page 10) to
deactivate the lock.
"Base x" flashes in the dis- The handset is outside the range Move the handset nearer to the
play? of the base. base.
The base is not switched on.
Check the power connector at
the base (page 7).
an internet address appears The automatic registration of Register your handset manu-
in the display? your handset to the base has ally (page 36).
been interrupted.
(when using more than one The base will not charge the Use an additional charger.
handset) the handset that is handset if telephoning is simul-
in the base does not charge? taneously in progress.
the handset does not ring? The ringer is switched off. Switch on the ringer in the
handset (page 42) .
I can hear no ringer tone/ You have changed the telephone When purchasing a new cord
dial tone? cord on your eircom 5010. ensure that it has the correct
pin assignment (page 7).
the other party cannot hear You have pressed the INT key. Switch on the microphone
me? This mutes the handset. again (page 16).
50
Appendix
What has happened Possible cause Possible solution

when
the incoming call number is Calling line identification is notThe caller should call eircom
not displayed even though enabled. on 1901 to enable the identifi-
CLIP is set? cation of his number (CLIP).
I hear an error tone (falling The action has failed or the input Repeat the procedure; watch
tone sequence) when keying is incorrect. the display and if necessary
an input? refer to the operating instruc-
tions.
the caller list does not indi- Date/time are not set. Set the date/time (page 13).
cate a time for a message?
Service (Customer Care)

Our online support on the Internet:
www.my-siemens.com/customercare
If you need any repair work, or have a guarantee claim to submit, our
Service-Center Ireland 18 50 77 72 77
will give you quick and reliable assistance. Keep your till receipt handy.
Please have your record of purchase ready when calling.
Replacement or repair services are not offered in countries where our product is not
sold by authorised dealers.
Your eircom 5010 is intended for operation in the Republic of Ireland, as depicted on
the underside of the base station. Country-specific features have been taken into
account.
The CE mark certifies conformity of the device with the essential requirements of the
R&TTE directive.
Excerpt from the original declaration
"We, Siemens AG, declare that the above mentioned product is manufactured according to our Full
Quality Assurance System certified by CETECOM ICT Services GmbH in compliance with ANNEX V
of the R&TTE Directive 99/05/EC. The presumption of conformity with the essential requirements
regarding Council Directive 99/5/EC is ensured"
Senior Approvals Manager
The Declaration of Conformity (DoC) has been signed. In case of need a copy of the original DoC
can be made available via the company hotline.
51
Appendix
Specifications
Recommended batteries
Nickel-metal-hydride (NiMH):
Sanyo Twicell 700
Sanyo Twicell 650
Panasonic 700 mAh
GP 700 mAh
YDT AAA SUPER 700
VARTA PhonePower AAA 700 mAh
Handset operating times/charging times
Capacity Standby time Calling time Charging time

(mAh) (hours) (hours) (hours)
700 approx. 170 (7 days) approx. 13 approx. 5
These operating and charging times apply only when using the recommended batter-
ies.
Power consumption
In standby status (no charging): eircom 5010 approx. 1.6 Watt;.
In standby status (device charging): eircom 5010 approx. 4.1 Watt;.
While calling (no charging): eircom 5010 approx. 2.0 Watt;.
52
Appendix
General Specifications
Feature Value
DECT standard is supported
GAP standard is supported
No. of channels 60 duplex channels
Radio frequency range 1880 -1900 MHz
Duplex method Time multiplex, 10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW, average power per channel
Range up to 300 m outdoors, up to 50 m indoors
Power supply/Base 230 V ~/ 50 Hz
Environmental conditions for operation +5 C to +45 C;
20 % to 75 % humidity
Dialling modes DTMF (tone dialling)
Recall 120 ms
Dimensions/Base eircom 5010: 129 x 114 x 63 mm (L x W x H)
Dimensions/Handset 151 x 55 x 27 mm (L W H)
Weight Base eircom 5010: 148 g;
Handset with battery cells: 127 g
Character set table
Standard characters
Press the relevant key repeatedly or hold it down
1x 2 x 3 x 4 x 5 x 6 x 7 x 8 x 9 x 10 x 11 x 12 x 13 x 14 x
Space
1 $
a b c 2
d e f 3
g h i 4
j k l 5
m n o 6
p q r s 7
t u v 8
w x y z 9
. , ? ! 0 + - : ; _
Abc-->
abc
abc-->
123 * / ( ) < = > %
# @ \ &
53
Appendix
Creating and editing text

You can create and edit text in a number of ways:
The cursor is controlled with u v t s.
Characters (to the left of the cursor) are deleted with .
Characters are added to the left of the cursor (page 12).
To switch from upper case (first letter upper case, all other letters lower case) to
lower case, press P before you key in the letter. Pressing P again switches from
lower case letters to digits. Press again to return to upper case letters.
The first letter of the name of directory entries is automatically capitalized, followed
by lower case letters.
Order of directory entries
1. Space (shown here as s)
2. Digits (09)
3. Letters (alphabetical)
4. Other characters
To work around the alphabetical order of the entries in the directory, enter a space
before the name. This entry then goes to the first position (example: "sKarla"). You can
also number the entries with digits (e.g. "1Ute", "2Karla", "3Albert").
54
Appendix
Guarantee certificate
Without prejudice to any claim the user (customer) may have in relation to the dealer or
retailer, the customer shall be granted a manufacturer's Guarantee under the conditions
set out below:
In the case of new devices and their components exhibiting defects resulting from
manufacturing and/or material faults within 24 months of purchase, Siemens shall,
at its own option and free of charge, either replace the device with another device
reflecting the current state of the art, or repair the said device. In respect of parts
subject to wear and tear (including but not limited to, batteries, keypads, casing),
this warranty shall be valid for six months from the date of purchase.
This Guarantee shall be invalid if the device defect is attributable to improper care or
use and/or failure to comply with information contained in the user manuals. In par-
ticular claims under the Guarantee cannot be made if:
The device is opened (this is classed as third party intervention)
Repairs or other work done by persons not authorised by Siemens.
Components on the printed circuit board are manipulated
The software is manipulated
Defects or damage caused by dropping, breaking, lightning or ingress of
moisture. This also applies if defects or damage was caused by mechanical,
chemical, radio interference or thermal factors (e.g.: microwave, sauna etc.)
Devices fitted with accessories not authorised by Siemens
This Guarantee shall not apply to or extend to services performed by the authorised
dealer or the customer themselves (e.g. installation, configuration, software down-
loads). User manuals and any software supplied on a separate data medium shall be
excluded from the Guarantee.
The purchase receipt, together with the date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims under the Guarantee must be submitted
within two months of the Guarantee default becoming evident.
Ownership of devices or components replaced by and returned to Siemens shall vest
in Siemens.
This Guarantee shall apply to new devices purchased in the European Union. For
Products sold in the Republic of Ireland the Guarantee is issued by Siemens Ireland
Limited, Ballymoss Road, Sandyford Industrial Estate, Dublin 18 - The Republic of
Ireland.
Any other claims resulting out of or in connection with the device shall be excluded
from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a
Customers Statutory Rights, nor the manufacturer's liability for death or personal
injury resulting from its negligence.
The duration of the Guarantee shall not be extended by services rendered under the
terms of the Guarantee.
Insofar as no Guarantee default exists, Siemens reserves the right to charge the cus-
tomer for replacement or repair.
The above provisions does not imply a change in the burden of proof to the detri-
ment of the customer.
To invoke this Guarantee, please contact the Siemens helpdesk on 1850 777 277.
55
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / Accessories.fm / 29.07.2003
Accessories
Accessories
eircom 5010a handset
Handset with full graphical two-line display and addi-
tional two lines with icons
Date and time displayed in idle mode
Full duplex grade handsfree
SMS (CLIP must be enabled)
Directory for 50 entries
Handsfree Speakerphone
56
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / menuetree.fm / 28.07.2003
Menu Tree
Menu Tree
Instead of scrolling to locate a menu function, you can select a menu function faster by
opening the menu and keying in the digit combination ('shortcut').
Example: MENU 5 4 1 for 'Set ringer melody for external calls'.
Main menu
With the telephone in idle status, press the display key MENU (open menu):
1 SMS 1-1 Write Message
1-2 Incoming
00+00
1-3 Outgoing
1-6 Settings 1-6-1 Service Centres 1-6-1-1 SMS Centre No. 1
1-6-1- [to]
1-6-1-5 SMS Centre No. 5
2 Select Serv- 2-3 Withhold
ices Number
2-4 For All Calls
2-4-3 Call Waiting
2-5 Cancel Ringback
4 Calender/ 4-3 Date/Time
Clock
4-4 Time Mode 4-4-1 24 hour
4-4-2 12 hour
5 Audio Set- 5-1 Earpiece Vol-
tings ume
5-2 Handsfree
Volume
5-3 Ringer Volume
5-4 Ringer Melody 5-4-1 External Calls 5-4-1-1 Melody 1
5-4-1-... [to]
5-4-1-0 Melody 10
5-4-2 Internal Calls 5-4-2-1 Melody 1
5-4-2-... [to]
5-4-2-0 Melody 10
5-5 Advisory Tones 5-5-1 Key Tones
5-5-2 Battery Low 5-5-2-1 Off
5-5-2-2 On
5-5-2-3 During Call
5-5-3 Confirmation
Tone
7 Handset Set- 7-1 Auto Answer
tings
7-2 Language
7-3 Register
Handset
7-5 Reset Handset
57
Menu Tree
8 Base Set-
tings
8-2 System PIN
8-3 Base Reset
8-4 Additional Fea- 8-4-1 Dialling Mode 8-4-1-1 Tone
tures
8-4-2 Recall 8-4-2-1 80 ms
8-4-2-... [to]
8-4-2-8 800 ms
8-4-3 Repeater Mode
9 Voice Mail 9-1 Set Key 1 9-1-1 Network Mail-
box
9-5-6 Delete
Announce Only
9-5-7 Set Answer 9-5-7-1 Answer and
Mode Record
9-5-7-2 Announce Only
9-6 Records 9-6-1 Message Length
9-7 Ring Delay 9-7-1 Immediately
9-7-2 10 sec
9-7-3 20 sec
9-7-4 30 sec
58
Menu Tree
Directory key and speed dial list key

Press the bottom half of the h key or the speed dial list key C, select an entry with
sand press MENU to open the required list . The following menu functions are avail-
able:
New Entry
Use Number
Edit Entry
Delete Entry
Delete List
Caller List
Press f. You will now see the following lists:
SMS: 00+00
Network Mailbox: 00+**
Calls List: 00+00
59
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / C_100SIX.fm / 28.07.2003
Index
Index
A Cancel
Access code ringback (cancel) . . . . . . . . . . . . . . 18
pause . . . . . . . . . . . . . . . . . . . . . . 49 ringer (handset) . . . . . . . . . . . . . . . 43
Access protection . . . . . . . . . . . . . . . 46 Care of the telephone . . . . . . . . . . . . . 50
Accessories . . . . . . . . . . . . . . . . . . . . 56 Change
Acknowledge tones . . . . . . . . . . . . . . 44 dialling mode . . . . . . . . . . . . . . . . . 48
Activating Changing the System PIN . . . . . . . . . . 46
handset . . . . . . . . . . . . . . . . . . . . . 10 Character set
keypad lock . . . . . . . . . . . . . . . . . . 10 standard character chart . . . . . . . . . 53
Advisory tones . . . . . . . . . . . . . . . . . 44 Charging status display. . . . . . . . . . . . . 9
Answer (auto) . . . . . . . . . . . . . . . 14, 41 CLI/CLIP . . . . . . . . . . . . . . . . . . . . . . . 15
Answering a call . . . . . . . . . . . . . . . . 14 CLIR . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Answering Machine Conference call . . . . . . . . . . . . . . . . . 18
eircom Call Answering . . . . . . . . . . 35 Confirmation tone . . . . . . . . . 10, 12, 44
Auto answer . . . . . . . . . . . . . . . . 14, 41 Connect . . . . . . . . . . . . . . . . . . . . . . . 39
Connect to a PABX . . . . . . . . . . . . . . . 48
B Consultation call (internal) . . . . . . . . . 40
Correcting wrong inputs . . . . . . . . . . . 12
Base
Customer Care (Service) . . . . . . . . . . . 51
connect to a PABX . . . . . . . . . . . . . 48
Customer service . . . . . . . . . . . . . . . . 51
connecting . . . . . . . . . . . . . . . . . . . 7
installation . . . . . . . . . . . . . . . . . . . 6
reset, see factory settings D
restore factory settings . . . . . . . . . . 47 Date and time . . . . . . . . . . . . . . . . . . 13
setting . . . . . . . . . . . . . . . . . . . . . . 46 Date setting . . . . . . . . . . . . . . . . . . . . 13
Base loudspeaker volume . . . . . . . . . 46 Deactivating
Batteries handset . . . . . . . . . . . . . . . . . . . . . 10
charging . . . . . . . . . . . . . . . . . . . . . 9 keypad lock . . . . . . . . . . . . . . . . . . 10
display . . . . . . . . . . . . . . . . . . . . . . . 9 Delete
inserting . . . . . . . . . . . . . . . . . . . . . 8 directory entry . . . . . . . . . . . . . . . . 21
recommended . . . . . . . . . . . . . . . . 52 draft message list (SMS) . . . . . . . . . 30
Battery tone . . . . . . . . . . . . . . . . . . . 44 incoming message list (SMS) . . . . . . 32
SMS . . . . . . . . . . . . . . . . . . . . . 30, 32
C Delete key . . . . . . . . . . . . . . . . . . . . . 11
De-registering handsets . . . . . . . . . . . 37
Call
Dialling modes . . . . . . . . . . . . . . . . . . 48
ending. . . . . . . . . . . . . . . . . . . . . . 14
Dialling pause . . . . . . . . . . . . . . . 14, 49
transfer (connect) . . . . . . . . . . . . . 39
Directory . . . . . . . . . . . . . . . . . . . . . . 19
Call waiting
delete an entry . . . . . . . . . . . . . . . . 21
external call . . . . . . . . . . . . . . . . . . 18
display and change an entry . . . . . . 21
internal call . . . . . . . . . . . . . . . . . . 40
store a number . . . . . . . . . . . . . . . . 19
Call waiting (external call)
store number for SMS . . . . . . . . . . . 33
accept/reject . . . . . . . . . . . . . . . . . 18
use to enter telephone number . . . . 22
activate/deactivate . . . . . . . . . . . . . 17
Caller list . . . . . . . . . . . . . . . . . . . . . . 23
Calling back a caller . . . . . . . . . . . . . . 24
Calling back from caller list . . . . . . . . 24
Calling Line Identification (CLI/CLIP) . . 15
60
Index
Display Handset at a glance . . . . . . . . . . . . . . . 1

12 hour display . . . . . . . . . . . . . . . 13 Handset charging times . . . . . . . . . . . 52
24 hour display . . . . . . . . . . . . . . . 13 Handset operating time . . . . . . . . . . . 52
Call number (CLI/CLIP) . . . . . . . . . . 15 Handsfree . . . . . . . . . . . . . . . . . . . . . 15
changing language . . . . . . . . . . . . 41 Handsfree volume . . . . . . . . . . . . . . . 42
display keys . . . . . . . . . . . . . . . . . . 11 Hash key . . . . . . . . . . . . . . . . . . . . 1, 10
in idle status . . . . . . . . . . . . . . . . . 12 Hearing aids . . . . . . . . . . . . . . . . . . . . 5
withhold (CLIR) . . . . . . . . . . . . . . . 17
Draft message list . . . . . . . . . . . . . . . 28 I
Draft message list (SMS) . . . . . . . 28, 29 Icon . . . . . . . . . . . . . . . . . . . . . . . . . 11
Idle status (display) . . . . . . . . . . . . . . 12
E Incoming message list (SMS) . 28, 31, 32
Earpiece mode . . . . . . . . . . . . . . . 1, 15 Internal
Earpiece volume . . . . . . . . . . . . . . . . 42 consultation . . . . . . . . . . . . . . . . . . 40
eircom Call answering making calls . . . . . . . . . . . . . . . . . . 38
viewing message . . . . . . . . . . . . . . 35
eircom call answering K
configuring for fast access . . . . . . . 35 Key 1 . . . . . . . . . . . . . . . . . . . . . . . . . 35
End call key. . . . . . . . . . . . . . . . . . 1, 14 Key click
Entry (directory) handset . . . . . . . . . . . . . . . . . . . . . 44
delete . . . . . . . . . . . . . . . . . . . . . . 21 Keys
display and change . . . . . . . . . . . . 21 delete key. . . . . . . . . . . . . . . . . . . . 11
find and dial . . . . . . . . . . . . . . . . . 20 display keys . . . . . . . . . . . . . . . . . . 11
Error . . . . . . . . . . . . . . . . . . . . . . . . . 44 end call key . . . . . . . . . . . . . . . . . . 14
Error tone . . . . . . . . . . . . . . . . . . 12, 44 key press (confirmation tone) . . . . . 44
Errors (SMS) . . . . . . . . . . . . . . . . . . . 34 keypad lock . . . . . . . . . . . . . . . . . . 10
last number redial key . . . . . . . . . . . 11
F menu key . . . . . . . . . . . . . . . . . . . . 11
Factory settings OK key . . . . . . . . . . . . . . . . . . . . . . 11
base . . . . . . . . . . . . . . . . . . . . . . . 47 on the handset . . . . . . . . . . . . . . 1, 11
handset . . . . . . . . . . . . . . . . . . . . . 45
Fast access L
eircom call answering . . . . . . . . . . 35 Language, see Changing display language
Key 1 . . . . . . . . . . . . . . . . . . . . . . . 35 Last number redial
First ring, see Ringer key. . . . . . . . . . . . . . . . . . . . . . . . . 11
Forward (SMS) . . . . . . . . . . . . . . . . . 32 last number redial list . . . . . . . . . . . 22
manual . . . . . . . . . . . . . . . . . . . . . 22
H List
Handset caller list . . . . . . . . . . . . . . . . . . . . 23
activating/deactivating . . . . . . . . . . 10 delete (SMS) . . . . . . . . . . . . . . . 30, 32
de-register . . . . . . . . . . . . . . . . . . . 37 draft message list (SMS) . . . . . . . . . 28
muting . . . . . . . . . . . . . . . . . . . . . 16 incoming message list (SMS) . . . . . . 31
name . . . . . . . . . . . . . . . . . . . . . . 38 last number redial list . . . . . . . . . . . 22
operating and charging times . . . . . 52 Listening to a message from the eircom
preparing to use . . . . . . . . . . . . . . . 8 Call answering . . . . . . . . 35
register . . . . . . . . . . . . . . . . . . . . . 36 Listening to eircom Call answering
reset, see factory settings messages . . . . . . . . . . . . 35
restoring factory settings . . . . . . . . 45 Lock, see Keypad lock
settings . . . . . . . . . . . . . . . . . . . . . 41
61
Index
Loudspeaker volume . . . . . . . . . . . . . 42 Phone jack . . . . . . . . . . . . . . . . . . . . . . 7

handset . . . . . . . . . . . . . . . . . . . . . 42 PIN
Lower/upper case . . . . . . . . . . . . . . . 54 System PIN . . . . . . . . . . . . . . . . . . . 46
Power consumption . . . . . . . . . . . . . . 52
M Power cord . . . . . . . . . . . . . . . . . . . . . 7
Making calls Power supply unit . . . . . . . . . . . . . . 5, 7
answering a call . . . . . . . . . . . . . . . 14
external . . . . . . . . . . . . . . . . . . . . . 14 Q
internal . . . . . . . . . . . . . . . . . . . . . 38 Questions and answers. . . . . . . . . . . . 50
Manual last number redial . . . . . . . . . 22
Medical appliances . . . . . . . . . . . . . . . 5 R
Melody . . . . . . . . . . . . . . . . . . . . . . . 42 Range . . . . . . . . . . . . . . . . . . . . . . . . . 6
Menu Read (SMS) . . . . . . . . . . . . . . . . . 30, 32
end tone . . . . . . . . . . . . . . . . . . . . 44 Recall . . . . . . . . . . . . . . . . . . . . . 39, 48
guidance . . . . . . . . . . . . . . . . . . . . 11 Recall key. . . . . . . . . . . . . . . . . . . . . . . 1
key . . . . . . . . . . . . . . . . . . . . . . . . 11 pause after . . . . . . . . . . . . . . . . . . . 49
tree . . . . . . . . . . . . . . . . . . . . . . . . 57 Registering handsets . . . . . . . . . . . . . 36
Message key . . . . . . . . . . . . . . . . . . . . 1 Removing protective film . . . . . . . . . . . 8
open a list . . . . . . . . . . . . . . . . . . . 23 Repeater . . . . . . . . . . . . . . . . . . . . . . 46
Microphone . . . . . . . . . . . . . . . . . . . . 1 Reply to (SMS) . . . . . . . . . . . . . . . . . . 32
Muting (first ring) . . . . . . . . . . . . 26, 43 Reset, see factory settings
Muting (handset) . . . . . . . . . . . . . . . 16 Ringback . . . . . . . . . . . . . . . . . . . . . . 18
cancel . . . . . . . . . . . . . . . . . . . . . . 18
N Ringer . . . . . . . . . . . . . . . . . . . . . 14, 42
Name muting . . . . . . . . . . . . . . . . . . . 26, 43
of a handset. . . . . . . . . . . . . . . . . . 38 off/on . . . . . . . . . . . . . . . . . . . . . . . 43
Number, see telephone number or entry set volume . . . . . . . . . . . . . . . . . . . 42
O S
OK key . . . . . . . . . . . . . . . . . . . . . . . 11 Safety Precautions . . . . . . . . . . . . . . . . 5
On/Off Key . . . . . . . . . . . . . . . . . . . . . 1 Select services . . . . . . . . . . . . . . . . . . 17
Operation Send (SMS) . . . . . . . . . . . . . . . . . 29, 30
preparing to use the handset . . . . . . 8 Send centre . . . . . . . . . . . . . . . . . . . . 27
preparing to use the phone . . . . . . . 6 Service . . . . . . . . . . . . . . . . . . . . . . . 51
Order of entries . . . . . . . . . . . . . . . . . 54 Services (select) . . . . . . . . . . . . . . . . . 17
Setting
P date . . . . . . . . . . . . . . . . . . . . . . . . 13
PABX. . . . . . . . . . . . . . . . . . . . . . . . . 48 display language . . . . . . . . . . . . . . . 41
pause after access code . . . . . . . . . 49 earpiece volume . . . . . . . . . . . . . . . 42
set dialling mode . . . . . . . . . . . . . . 48 loudspeaker volume . . . . . . . . . . . . 42
set recall . . . . . . . . . . . . . . . . . . . . 48 recall . . . . . . . . . . . . . . . . . . . . . . . 48
Pack contents . . . . . . . . . . . . . . . . . . . 6 ringer volume . . . . . . . . . . . . . . . . . 42
Paging/Paging key . . . . . . . . . . . . . . . 37 time . . . . . . . . . . . . . . . . . . . . . . . . 13
Pause Setting, see also Base . . . . . . . . . . . . . 46
after access code . . . . . . . . . . . . . . 49 Settings, see also Handset . . . . . . . . . 41
after Recall key . . . . . . . . . . . . . . . . 49 Short Message Service, see SMS
change after line seizure . . . . . . . . 49 Shortcut . . . . . . . . . . . . . . . . . . . . . . 57
Phone cord . . . . . . . . . . . . . . . . . . . . . 7 Signal tone, see advisory tones
62
Index
SMS Time mode . . . . . . . . . . . . . . . . . . . . 13

activating/deactivating function . . . 26 Time setting . . . . . . . . . . . . . . . . . . . 13
an Telefonanlagen . . . . . . . . . . . . . 33 Toggling . . . . . . . . . . . . . . . . . . . . . . 18
date and time . . . . . . . . . . . . . . . . 31 Tone
delete . . . . . . . . . . . . . . . . . . . 30, 32 battery tone . . . . . . . . . . . . . . . . . . 44
delete draft message list . . . . . . . . 30 confirmation . . . . . . . . . . . . . . 12, 44
delete incoming message list . . . . . 32 error tone . . . . . . . . . . . . . . . . . 12, 44
delete stored SMS . . . . . . . . . . . . . 29
draft message list . . . . . . . . . . . . . 28 U
edit stored SMS . . . . . . . . . . . . . . . 29 Upper/lower case . . . . . . . . . . . . . . . . 54
errors in reception/transmission . . . 34
forward . . . . . . . . . . . . . . . . . . . . . 32
V
incoming message list . . . . . . . . . . 31
Volume
read . . . . . . . . . . . . . . . . . . . . 30, 32
earpiece . . . . . . . . . . . . . . . . . . . . . 42
read stored SMS . . . . . . . . . . . . . . . 29
handsfree . . . . . . . . . . . . . . . . . . . . 42
read/delete incoming SMS . . . . . . . 32
loudspeaker (handset) . . . . . . . . . . 42
read/delete stored SMS. . . . . . . . . . 30
ringer (handset) . . . . . . . . . . . . . . . 42
received . . . . . . . . . . . . . . . . . . . . 31
reply to . . . . . . . . . . . . . . . . . . . . . 32
requirements . . . . . . . . . . . . . . . . . 26 W
send . . . . . . . . . . . . . . . . . . . . 29, 30 Wait melody . . . . . . . . . . . . . . . . . . . 16
send centre . . . . . . . . . . . . . . . . . . 27 Warning tone, see advisory tones
send stored SMS . . . . . . . . . . . . . . 29 Withhold number (CLIR) . . . . . . . . . . . 17
storage capacity. . . . . . . . . . . . . . . 26 Writing (SMS) . . . . . . . . . . . . . . . . . . 28
storing . . . . . . . . . . . . . . . . . . . . . 28 Wrong inputs (correcting) . . . . . . . . . 12
storing a number . . . . . . . . . . . . . . 33
writing . . . . . . . . . . . . . . . . . . . . . 28
SMS centre
changing a number . . . . . . . . . . . . 27
Specifications . . . . . . . . . . . . . . . 52, 53
Speed dial key . . . . . . . . . . . . . . . . 1, 19
Speed dial list . . . . . . . . . . . . . . . . . . 19
delete a single entry . . . . . . . . . . . 21
store a number . . . . . . . . . . . . . . . 20
Star key . . . . . . . . . . . . . . . . . . . . 1, 43
System settings . . . . . . . . . . . . . . . . . 46
T
Talk key . . . . . . . . . . . . . . . . . . . . . . . 1
Telephone
preparing to use . . . . . . . . . . . . . . . 6
protect from access . . . . . . . . . . . . 46
Telephone number
enter from directory . . . . . . . . . . . . 22
pick from directory . . . . . . . . . . . . . 22
store (directory) . . . . . . . . . . . . . . . 19
store (SMS) . . . . . . . . . . . . . . . . . . 33
Text messages
see SMS . . . . . . . . . . . . . . . . . . . . 26
63
Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / cover_back_Vorlage.fm / 29.07.2003
A3 1 0 0 8 - C1 0 0 - E 1 0 1 - 1 - 7 6 1 9
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
Siemens AG 2003
All rights reserved. Subject to availability.
Right of modification reserved.
Printed in Germany (08/2003).
Siemens Aktiengesellschaft
http://www.my-siemens.com
No.: A31008-C100-E101-1-7619

Eircom 5010

Uploaded by

Copyright:

Available Formats

Eircom 5010

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Eircom 5010

Uploaded by

Copyright:

Available Formats

Gigaset C100 / IRL-PTT / A31008-C100-E101-1-7619 / cover_0_Vorlage.fm / 24.07.

The handset at a glance

The handset at a glance

Talk/ Display (display screen)

Operating the telephone, menu guidance . . . . . . 11

Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using the directory and other lists . . . . . . . . . . . . 19

SMS (Text Messages) . . . . . . . . . . . . . . . . . . . . . . . 26

Using eircom call answering . . . . . . . . . . . . . . . . . 35

Registering and de-registering handsets . . . . . . . 36

Using several handsets . . . . . . . . . . . . . . . . . . . . . 38

Setting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Connecting the base to a PABX . . . . . . . . . . . . . . . 48

The operation of medical appliances may be affected. Be aware of the techni-

The handset may cause an intrusive 'hum' in hearing aids.

Ensure that your eircom handset is accompanied by these instructions when

Dispose of the batteries and phone in accordance with environmental regula-

Preparing to use your phone

Preparing to use your phone

Installing the base

Never expose the telephone to heat sources, direct sunlight, other

Preparing to use your phone

Connecting the base

Preparing to use your phone

Preparing to use the handset

Removing protective film

The display is protected by a plastic film.

Inserting the batteries

Insert the batteries ensuring correct polarity see figure on left.

Use only the rechargeable batteries recommended by Siemens on

Preparing to use your phone

= Batteries flat V Batteries 2/3 charged

i To register additional handsets , refer to page 36.

For the initial charge we recommend a continuous, uninterrupted charg-

Your telephone is now ready for operation.

Preparing to use your phone

Activating/deactivating the handset

i The handset activates automatically when placed in the base or charger.

Activating/deactivating the keypad lock

The keypad lock deactivates automatically when you receive a call. It

Operating the telephone, menu guidance

Operating the telephone, menu guidance

The various functions are explained below:

Display icon Meaning when key is pressed

Operating the telephone, menu guidance

Correcting wrong inputs

Display in idle status

Reverting to idle status from anywhere in the menu

Menu operation, with "Setting Handsfree Volume" as an example

1. MENU Press the display key. The menu opens.

Date and Time

Date and Time

Changing the time mode

Inserting a dialling pause

i To call another handset, see the description on page 38.

Calling Line Identification

The screen displays External Call if the number is not identified.

Activate while dialling:

Adjusting the volume while in handsfree mode

Function that is set for the next call