Power Section: 2.875" 1/2 Lobes 4.9 Stages
Power Section: 2.875" 1/2 Lobes 4.9 Stages
Power Section: 2.875" 1/2 Lobes 4.9 Stages
9
2.875" 1/2 Lobes 4.9 Stages
www.dyna-drill.com
USA: 23400 Colonial Parkway, Katy, TX 77493 Tel: (281) 227-1250, Fax:( 281) 227-1255
Canada: Bay E.; 2802- 5th Street, Nisku, Alberta T9E-0H1 Tel:(780) 955-7711, Fax: (780) 955-7833
Dubai: Oilfields Supply Center, Bldg B-30, P.O. Box 261039, Dubai, UEA, Tel: 011-971-4-8100310, Fax: 011-971-4-8100313
POWER SECTION
ROTOR SPECIFICATIONS STATOR SPECIFICATIONS
Inch mm Inch mm
Overall Length 111.0 2819 Overall Length 117.0 2972
Contour Length 108.0 2743 Rubber Cut Back 6.0 152
Eccentricity 0.245 6.22 Tube O.D. 2.88 73.0
Major Diameter 1.585 40.26 Tube I.D. 2.44 62.0
Head Diameter 1.630 41.40
Weight 69 (lbs) 31.3 (kg) Weight 71 (lbs) 32 (kg)
Material 17-4SS Number of Stages 4.9
1.125-8 STUB Rubber Type NBR-HR
Thread Form*
ACME Tube Material 4142 Seamless Tubing
* Alternate or custom thread forms are available
FIT INFORMATION
POWER SECTION FIT CHANGE
NBR-HR Minor Diameter
Temp Change (C)
10 38 66 93 121 Stator Size Inch mm
Undersize
____ NBR-HR Standard 1.073 27.25
0.039 1.04
Oversize
0.78
Inch
mm
0.026 Double Oversize
0.52 Nominal Fit at 75 F (25 C)
0.013 0.26
Undersize
Standard 0.022 0.56
0.000 0 Oversize
0 50 100 150 200 250 Double Oversize
Temp Change (F)
NBR-HR Torque
Power Section Diff Pressure (kPa)
ft-lb
Nm
0 2000 4000 6000 8000
300
720
GPM=60 LPM= 227
150
RPM
200
480
100
240
50
0
0
Operating a power section above the maximum recommended differential pressure will reduce stator life. Performance Curves are for reference only. Actual power
section performance may vary depending on the down hole temperature and rotor/stator fit. Performance data are subject to change without notice. Power
calculation is based on maximum RPM and full torque. Stator sizes subject to change without notice. Copyright 2015 Dyna-Drill. All rights reserved.
1/21/2015