DD 375349 0 PDF 20160211 1478101050899 19
DD 375349 0 PDF 20160211 1478101050899 19
DD 375349 0 PDF 20160211 1478101050899 19
0
3.75" 3/4 Lobes 9 Stages
www.dyna-drill.com
USA: 23400 Colonial Parkway, Katy, TX 77493 Tel: (281) 227-1250, Fax:( 281) 227-1255
Canada: Bay E.; 2802- 5th Street, Nisku, Alberta T9E-0H1 Tel:(780) 955-7711, Fax: (780) 955-7833
Dubai: Oilfields Supply Center, Bldg B-30, P.O. Box 261039, Dubai, UEA, Tel: 011-971-4-8100310, Fax: 011-971-4-8100313
POWER SECTION
ROTOR SPECIFICATIONS STATOR SPECIFICATIONS FIT INFORMATION
Inch mm Inch mm NBR-1A Minor Diameter
Overall Length 126.0 3200 Overall Length 149.0 3785 Stator Size Inch mm
Contour Length 121.0 3073 Rubber Cut Back 15.0 381 Standard N/A N/A
Eccentricity 0.196 4.98 Tube O.D. 3.75 95.3 Oversize 1.585 40.26
Major Diameter 1.959 49.76 Tube I.D. 2.75 69.9 Double Oversize
Head Diameter 2.000 50.80
Weight 71 (lbs) 32.2 (kg) Weight 230 (lbs) 104 (kg) Nominal Fit at 75 F (25 C)
Material 17-4SS Number of Stages 9.0 Standard
1.375 - 6 STUB Rubber Type NBR-1A, NBR-HR Oversize -0.018 -0.46
Thread Form*
ACME Tube Material 4142 Seamless Tubing Double Oversize
* Alternate or custom thread forms are available
FIT INFORMATION
____ NBR-HR POWER SECTION FIT CHANGE
------ NBR-1A Temp Change (C) NBR-HR Minor Diameter
Stator Size Inch mm
10 38 66 93 121
Undersize
1.04 Standard 1.567 39.80
0.039
Oversize
0.78 Double Oversize
Inch
mm
0.026
0.52 Nominal Fit at 75 F (25 C)
0.013 0.26 Undersize
Standard 0.000 0.00
0.000 0 Oversize
0 50 100 150 200 250 Double Oversize
Temp Change (F)
NBR-HR Torque
Power Section Diff Pressure (kPa)
ft-lb
NBR-1A
Nm
0 3000 6000 9000 12000 15000
950
GPM=160 LPM= 605 Maximum Recommended Diff Pressure 1400
1000
760
GPM=120 LPM= 454
1050
750
570
380
NBR-1A NBR-HR
350
250
190
0
0
Operating a power section above the maximum recommended differential pressure will reduce stator life. Performance Curves are for reference only. Actual power
section performance may vary depending on the down hole temperature and rotor/stator fit. Performance data are subject to change without notice. Power
calculation is based on maximum RPM and full torque. Stator sizes subject to change without notice. Copyright 2014 Dyna-Drill® . All rights reserved.
11/10/2014