Quadricycle Approval Docs PDF

Access Motor Co., Ltd.
No. 5, Chung-Hsin Rd., Chia-Tai Industrial Zone, Tai-Pao City,

Chia-Yi Hsien 612, Taiwan
Tel: 886-5-2377870 Fax: 886-5-2377875
APPLICATION FOR EXTENSION APPROVAL OF TWO OR THREE-WHEEL MOTOR VEHICLES

ACCORDING TO 2002/24/EC DIRECTIVE AMENDED BY 1137/2008/EC
1. Trade name or mark of the Device : Access
2. Manufacturers name of the Device : SP250
3. Manufacturers name and address : Access Motor Co., Ltd.

No. 5, Chung-Hsin Rd., Chia-Tai Industrial Zone,
Tai-Pao City, Chia-Yi Hsien 612, Taiwan
4. If applicable, name and address of : Not applicable

manufacturers representative
5. Brief description : Quadricycle
6. Submitted for approval on (date) : January 7, 2013
We herewith certify that we didnt apply nor receive a certificate for the above mentioned
type in any other EC/ECE member state.
Name: Sean Huang

Position: General Manager
Date: January 7, 2013
THIS APPLICATION IS ACCOMPANIED WITH:

-The test report
No 5, Chung-Hsin Rd., Chia-Tai Industrial Zone, Tai-Pao City, Chia-Yi Hsien 612, Taiwan
Tel: 886-5-2377870 Fax: 886-5-2377875
Certificate
In respect to Article 7 in Directive 2002/24/EC, we, ACCESS MOTOR

CO., LTD., Hereby certify that the following has the authority to sign the
Certificates of Conformity for vehicles produced by ACCESS MOTOR
CO., LTD. and imported to the Member States of the European Union.
Name Position in Company Signature
Sean Huang General Manager
Kevin Chen Section Chief
Eeric Lin Team Leader
Manager of R&D
Kevin Hsu
Department
Hao-Chien Fang Engineer

No 5, Chung-Hsin Rd., Chia-Tai Industrial Zone, Tai-Pao City, Chia-Yi Hsien 612, Taiwan
Tel: 886-5-2377870 Fax: 886-5-2377875
CERTIFICATE OF CONFORMITY
CERTIFICATE OF CONFORMITY ACCOMPANYING EACH VEHICLE IN THE SERIES OF THE
TYPE WHICH HAS BEEN APPROVED
The undersigned:
_______________ hereby certifies that the following vehicle:
0.1. Make: Access

0.2. Type: SP250
Variant: 450
Version: SP450-SA3, SP450-SMA4
0.2.1. Commercial name(s): Access Motor, as option: SS250R, Hammel, Quadzilla,
Bogart Patriot, Nexmotor, Tomahawk, Apollo, Spike, Speed,
Maverick, TKM, FOCUS, TENA, TRITON, MAX, APACHE,
Burelli, Warrior
0.4. Vehicle category: L7e
0.4.1. Vehicle category according to Directive 97/24/EC, Chapter 7: N.A.
0.5. Name and address of the manufacturer:
No. 5, Chung-Hsin Rd., Chia-Tai Industrial Zone, Tai-Pao City, Chia-Yi Hsien 612, Taiwan
0.6. Location of the statutory plate: L, x1147, y126, z630 (version SP450-SA3)
L, x1147, y126, z535 (version SP450-SMA4)
Vehicle identification number: RK3SPA3E11A000001 (version SP450-SA3)
RK3SPA4E11A000001 (version SP450-SMA4)
0.7. Location of the vehicle identification number on the chassis:
R, x100, y87, z455 (version SP450-SA3)
R, x75, y87, z305 (version SP450-SMA4)
Conforms in all respects to the type described in EC type-approval
- EC type-approval number: e4*2002/24*1151*10
- Dated:
The vehicle can be permanently registered without requiring any further approvals, for
driving on the right/left and for using metric/imperial units for the speedometer.
Chia-Yi, Taiwan, R.O.C.
(Place) (Date)
(Signature) (Position)
Additional Information
1. Number of axles: 2 and wheels: 4
3. Wheel base: 1270 mm
6.1. Length: 1825 mm (version SP450-SA3), 1860 mm (version SP450-SMA4)
7.1. Width: 1205 mm (versions SP450-SA3), 1230 mm (SP450-SMA4)
8. Height: 1115 mm (version SP450-SA3), 1025 mm (version SP450-SMA4)
12.1. Mass of the vehicle (with bodywork) in running order: 229 kg (version SP450-SA3)
236 kg (version SP450-SMA4)
12.2. Unladen mass of the vehicle: 219 kg (version SP450-SA3)
14.1. Technically permissible maximum laden mass: 379 kg (version SP450-SA3)
14.2. Distribution of this mass among the axles:
1. 156 kg 2. 223 kg (version SP450-SA3)
1. 154 kg 2. 232 kg (version SP450-SMA4)
14.3. Technically permissible mass on each axle:
1. 160 kg 2. 236 kg
17. Maximum mass of trailer: N.A.
(brake):.kg (unbraked):kg
19.1. Maximum vertical load at the coupling point for a trailer: N.A.
20. Engine manufacturer: Access Motor Co., Ltd.
21. Engine type as marked on the engine: E1
21.2. Engine number: E12R??????
22. Working principle: electric/spark ignition/compression ignition, four/two stroke
23. Number and arrangement of cylinders: S
24. Cylinder capacity: 448.8 cm3
25. Fuel: P
26. Maximum net power or maximum continuous rated power as applicable:
15.0 kW at 6000 min-1
26.1. Ratio: maximum net power or maximum continuous rated power/mass of the vehicle in running
order: 0.066 kW/kg (version SP450-SA3), 0.064 kW/kg (version SP450-SMA4)
28. Gearbox (type): M
29. Gear ratio:
Version SP450-SMA4
Primary gear ratio Gear ratio Chain ratio
FORWARD REVERSE
1st 2nd 3rd 4th 5th
1: 2.5 1: 2.538 1: 1.684 1: 1.261 1: 1.040 1: 0.885 1: 2.231 1: 2.714
Version SP450-SA3
Primary gear ratio Gear ratio Chain ratio
FORWARD REVERSE
1st 2nd 3rd 4th 5th
1: 2.5 1: 2.538 1: 1.684 1: 1.261 1: 1.040 1: 0.885 1: 2.231 1: 3.143
32. Tyre size designation:

(version SP450-SA3)
7-10
Axle 1: 21 11-9 or 20
Axle 2: 20 11-10
(version SP450-SMA4)
Axle 1: 165/70-10 Axle 2: 225/40-10
37. Body: No
41. Number and configuration of doors: N.A.
42.1. Number and position of seats: 2, r1: 1C, r2: 1C
43.1. Approval mark of coupling device, if fitted: N.A.
44. Maximum speed: 80 km/h
45. Sound level:
In accordance with 97/24/EC Chapter 9, amendment 2009/108/EC
Stationary: 91 dB(A) at engine speed: 3000 min-1
Drive-by: 78 dB(A)
46. Exhaust emissions:
In accordance with 97/24/EC Chapter 5, amendment 2009/108/EC, stage 2003
Type I test: CO: 4.055 g/km, HC: 0.125 g/km, NOx: 0.149 g/km, HC+NOx: --
Type II test: for motorcycles and tricycles: CO: 0.924 %
Visible air pollution caused by an engine with compression ignition: N.A.
- corrected value of absorption coefficient: N.A.
47. Fiscal power or national code number(s):
Italy: France: Spain:
Belgium: Germany: Luxembourg:
Denmark: Netherlands: Greece:
United Kingdom: Irland: Portugal:
Austria: Sweden: Finland:
Czech Republic: Estonia: Cyprus:
Latvia: Lithuania: Hungary:
Malta: Poland: Slovenia:
Slovakia: Romania: Bulgaria:
50. Remarks:
51. Exemptions:
Vehicle Technology Division
THE NETHERLANDS
(N E D E R L A N D)
EC TYPE-APPROVAL CERTIFICATE
Communication concerning:
- type-approval (1)
- extension of type-approval (1)
- refusal of type-approval (1)
- withdrawal of type-approval (1)
of a type of vehicle with regard to Directive 2002/24/EC.
EC type-approval number : e4*2002/24*1151*10
Reason for extension : - modification of maximum speed for versions

SP450-SA3 and SP450-SMA4
- addition of optional rear direction indicator,
rear position and stop lamp, rear retro
reflector, license plate illuminator, rear retro
reflector and rear fog lamp for versions SP180-
S, SP250-S, SP300-S, SP300-SM, SP400-S,
SP400-SM, SP400-SI, SP400-SMI, SP450-
SA3, SP450-SMA4
Approval mark : e4*2002/24*1151
0. General
0.1. Make(s) (trade name of the : Access

manufacturer)
0.2. Type : SP250

Variant(s) : 180, 250, 300, 400, 400SI, 450
Version(s) : SP180-S, SP250-S, SP250-U, SP300-S, SP300-
U, SP300-SM, SP400-S, SP400-SM, SP450-S,
SP450-SM, SP450-SA, SP450-SMA, SP400-SI,
SP400-SMI, SP450-SA3, SP450-SMA4
P.O. Box 777 Tel. + 31 (0)79 345 81 43 Vehicle Approval and Information
2700 AT Zoetermeer Fax + 31 (0)79 345 80 43
The Netherlands www.rdw.nl
WVTA 2002.24-2006.96 v5.01 Page 1 of 5

Type-approval number: e4*2002/24*1151*10
0.2.1. Commercial name(s) : Access Motor, as option: SS250R, Hammel,

Quadzilla, Bogart Patriot, Nexmotor, Tomahawk,
Apollo, Spike, Speed, Maverick, TKM ,FOCUS,
TENA, TRITON, MAX, APACHE, Burelli,
Warrior
0.3. Means of identification of type, if : ???SP????????????

marked on the vehicle
0.3.1. Location of that marking : On the right side of frame body
0.4. Category (2) : L7e
0.5. Name and address of the vehicle : Access Motor Co., Ltd.
manufacturer No. 5, Chung-Hsin Rd., Chia-Tai Industrial Zone,
0.5.1. Name(s) and address(es) of assembly : Access Motor Co., Ltd.

plant(s) No. 5, Chung-Hsin Rd., Chia-Tai Industrial Zone,
The undersigned hereby certifies the accuracy of the manufacturers description in the attached
information document of the vehicle type described above, for which one or several representative
samples, selected by the competent approval authorities, has (have) been submitted as prototype(s) of
the vehicle type and that the attached test results are applicable to the vehicle type.
The vehicle type meets/does not meet (1) the technical requirements of all relevant separate Directives (as last
amended) listed in the table of Annex I to Directive 2002/24/EC.
The approval is granted/refused/withdrawn (1).

Place : Zoetermeer
Signature :
Date : 28-JAN-2013
Attachments: Information document, Parts 1 and 2 (Annex II).

Test results (Annex VII).
Name(s) and specimen(s) of the signature of the persons authorised to sign the
certificates of conformity and a statement of their position in the company.
A model certificate of conformity.
(1)
Delete where not applicable.
(2)
According to the classification introduced in Article 1.
WVTA 2002.24-2006.96 v5.01 Page 2 of 5

ANNEX VII
TEST RESULTS
(Article 5(1), first subparagraph)
In each case, the information must make clear to which variant and version it is applicable.
One version may not have more than one result.
1. Results of the sound level tests.
Number of the base Directive and latest amending Directive applicable to the approval.
In the case of a Directive with two or more implementation stages, indicate also the
implementation stage:
- 97/24/EC Chapter 9 as last amended by 2009/108/EC
Variant/version 180/ 250/ 250/ 300/ 300/ 300/
SP180-S SP250-S SP250-U SP300-S SP300-U SP300-SM
Moving dB(A) 79 79 80 77 76 79
Stationary dB(A) 78 82 81 84 82 84
-1
at (min ) 3250 3500 3000 3750 3750 3750
Variant/version 450/ 450/ 400/ 400/ 450/ 450/
SP450-S SP450-SM SP400-S SP400-SM SP450-SA SP450-SMA
Moving dB(A) 79 79 80 79 78 78
Stationary dB(A) 84 84 84 84 90 90
at (min-1) 3250 3250 3100 3100 3000 3000
Variant/version 400SI/ 400SI/ 450/ 450/ -- --
SP400-SI SP400-SMI SP450-SA3 SP450-
SMA4
Moving dB(A) 76 76 78 78 -- --
Stationary dB(A) 80 80 91 91 -- --
-1
at (min ) 3250 3250 3000 3000 -- --
2. Results of the exhaust emission tests.
Number of the base Directive and latest amending Directive applicable to the approval.
In the case of a Directive with two or more implementation stages, indicate also the
implementation stage:
- 97/24/EC Chapter 5 as last amended by 2009/108/EC, stage A (2003)
Variant/version 180/ 250/ 250/ 300/ 300/ 450/
SP180-S SP250-S SP250-U SP300-S SP300-U SP450-SA
Variant/version 450/ 300/ 450/ 400/ 400/ 450/
SP450-S SP300-SM SP450-SM SP400-S SP400-SM SP450-SMA
Variant/version 400SI/ 400SI/ 450/ 450/ -- --
SP400-SI SP400-SMI SP450-SA3 SP450-
SMA4
2.1. Type I
CO (g/km) 2.257 2.203 1.833 3.889 2.619 4.557
HC (g/km) (1) 0.271 0.625 0.308 0.561 0.344 0.421
WVTA 2002.24-2006.96 v5.01 Page 3 of 5

NOx (g/km) (1) 0.257 0.181 0.205 0.178 0.261 0.113

(2)
HC + NOx (g/km) -- -- -- -- -- --
CO (g/km) 1.008 1.380 2.150 2.272 1.569 4.557
(1)
HC (g/km) 0.101 0.363 0.084 0.344 0.339 0.421
(1)
NOx (g/km) 0.132 0.257 0.103 0.212 0.214 0.113
HC + NOx (g/km) (2) -- -- -- -- -- --
CO (g/km) 5.564 5.564 4.055 4.055 -- --
(1)
HC (g/km) 0.764 0.764 0.125 0.125 -- --
(1)
NOx (g/km) 0.203 0.203 0.149 0.149 -- --
HC + NOx (g/km) (2) -- -- -- -- -- --
2.2. Type II
CO (g/min) (2) -- -- -- -- -- --
(2)
HC (g/min) -- -- -- -- -- --
CO (% vol) at normal 0.123 0.071 0.079 2.491 0.056 0.074
idle speed (1)
Specify the idle speed 1800 1600 1800 1600 1600 1800
(1) (3)
100 100 100 100 100 100
CO (% vol) at high 0.230 0.058 0.057 2.972 0.037 0.441
idle speed (1)
(1) (3)
100 100 100 100 100 100
Engine oil temperature 67 C at 64 C at 59 C at 52 C at 61 C at 46 C at
(1) (4) 1820 min-1 1540 min-1 1760 min-1 1700 min-1 1620 min-1 1770 min-1
67 C at 65 C at 61 C at 55 C at 62 C at 49 C at
2350 min-1 2190 min-1 2400 min-1 2070 min-1 2030 min-1 3750 min-1
CO (g/min) (2) -- -- -- -- -- --
HC (g/min) (2) -- -- -- -- -- --
CO (% vol) at normal 0.028 0.114 0.041 0.025 0.026 0.074
idle speed (1)
(1) (3)
100 100 100 100 100 100
CO (% vol) at high 0.025 0.117 0.036 0.024 0.024 0.441
idle speed (1)
(1) (3)
100 100 100 100 100 100
Engine oil temperature 69 C at 75 C at 54 C at 86 C at 86 C at 46 C at
(1) (4) 1800 min-1 1640 min-1 1880 min-1 1600 min-1 1600 min-1 1770 min-1
70 C at 77 C at 62 C at 86 C at 87 C at 49 C at
2200 min-1 2050 min-1 2250 min-1 2100 min-1 2100 min-1 3750 min-1
CO (g/min) (2) -- -- -- -- -- --
HC (g/min) (2) -- -- -- -- -- --
CO (% vol) at normal 0.693 0.693 0.924 0.924 -- --

idle speed (1)
WVTA 2002.24-2006.96 v5.01 Page 4 of 5

Specify the idle speed 1600 1600 1800 1800 -- --

(1) (3) 100 100 100 100
CO (% vol) at high 0.640 0.640 0.077 0.077 -- --

idle speed (1)
Specify the idle speed 2500 2500 4000 4000 -- --
(1) (3)
100 100 100 100
Engine oil temperature 81 C at 81 C at 59 C at 59 C at -- --
(1) (4)
1600 min-1 1600 min-1 1800 min-1 1800 min-1
82 C at 82 C at 63 C at 63 C at
2500 min-1 2500 min-1 4000 min-1 4000 min-1
3. Compression ignition engine
Variant/version -- --
Corrected value of -- --
absorption coefficient
(m-1)
(1)
Only for motorcycles and motor tricycles and for quadricycles as defined in Article 1, paragraph 3(b).
(2)
Only for mopeds and for light quadricycles as defined in Article 1, paragraph 3(a).
(3)
Mention the measurement tolerance.
(4)
Applicable for four-stroke engines only.
WVTA 2002.24-2006.96 v5.01 Page 5 of 5

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
Manufacturer : Access Motor Co., Ltd.
TEST REPORT
According to Council Directive on the approximation of

the laws of the Member States relating to the
Type-approval
of two or three-wheel motor vehicles
No.: 2002/24/EC
including all amendments until
No.: 1137/2008/EC
Previously granted
EC-system type approval : e4*2002/24*1151*09
Structure of report: 0. General information

1. Test object(s) and general test information
2. Test minutes
3. Remark concerning tested object(s)
4. Appendices
5. Statement of conformity
The Test Report shall be reproduced and published in full by the client only. It shall however be
reproduced partially with the written permission of the Testing Laboratory only.
TV Rheinland Kraftfahrt GmbH Technologiezentrum Verkehrssicherheit 77-1532e12.rdw Page 1 of 17

Typprfstelle Fahrzeuge/Fahrzeugteile
Accreditation: RDW-99050014-06 Am Grauen Stein, D-51105 Kln (Poll)
TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
0. General information
0.1. Trade mark or trade name of : Access

the vehicle
0.2. Manufacturers name for the : SP250

type of the vehicle
0.3. Name and address of the : Access Motor Co., Ltd.

manufacturer No. 5, Chung-Hsin Rd., Chia-Tai Industrial Zone,
0.4. Name and address of the : Not applicable

manufacturers authorized
representative
0.5. No. of information document : SP250-2002/24-10

date of issue : May 10, 2006
date of last amendment : January 7, 2013

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
1. Test object(s) and general test information
1.1. Test object(s)
1.1.1 Identification no. : RK3SP12129A000631,

Engine No. E12R001679
Variant(s) : 450
Version(s) : SP450-SA3, SP450-SMA4
Sort / category : Quadricycle / L7e
1.2. General test information
1.2.1 Order issued by : --

(if different from manufacturer)
1.2.2 Test object received on : --
1.2.3 Test date : December 24, 2012 to January 4, 2013
1.2.4 Test site : Tai-Pao / Taiwan
1.2.5 Remark : The results of the test refer exclusively to the object(s)
mentioned under point 1.1. of this report.

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
2. Test minutes
2.1. Test facilities : The test facilities used are in compliance with the
requirements of the directive.
2.2. Test results : The vehicle type has been tested according to the
amendments mentioned in appendix 0.
See Appendix 1.
2.3. Variants and components
Variant(s) : 180, 250, 300, 400, 400SI, 450
Version(s) : SP180-S, SP250-S, SP250-U, SP300-S, SP300-U,

SP300-SM, SP400-S, SP400-SM, SP450-S, SP450-SM,
SP450-SA, SP450-SMA, SP400-SI, SP400-SMI,
SP450-SA3, SP450-SMA4
3. Remarks concerning tested object(s)
All versions of the vehicle type as stated in the information document are covered with the
tested vehicle version(s) and test object(s) respectively.

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
4. Appendices
0 List of modifications
1 Test minutes of frame directive : Pages 7 to 15
2 Test minutes of braking system : Not attached as not relevant to the extension
3 Test minutes of audible warning : Not attached as not relevant to the extension
device
4 Test minutes of maximum speed : Pages 16 to 17
5 Test minutes of maximum : Not attached as not relevant to the extension

engine power and torque
6 Test minutes of anti-pollution : Not attached as not relevant to the extension

devices
7 Test minutes of anti-tampering : Not attached as not applicable to the vehicle category
measures
8 Test minutes of EMC : Not attached as not relevant to the extension
9 Test minutes of noise measuring : Not attached as not relevant to the extension
10 Test minutes of speedometer : Not attached as not relevant to the extension

measuring
11 Information folder no. : SP250-2002/24-10 (44 pages)

(excluding drawings)
5. Statement of conformity
The above mentioned information folder and the type described in that comply with the
requirements mentioned on page 1.
Cologne, January 11, 2013

KWU/JYW
B.S.M.E. J. Wu

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
List of modifications Appendix 0
Correction of : --
Modification of : - maximum speed for versions SP450-SA3 and SP450-

SMA4
Addition of : - optional rear direction indicator, rear position and stop

lamp, rear retro reflector, license plate illuminator, rear
retro reflector and rear fog lamp for versions SP180-S,
SP250-S, SP300-S, SP300-SM, SP400-S, SP400-SM,
SP400-SI, SP400-SMI, SP450-SA3, SP450-SMA4
Deletion of : --

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
Test minutes of the frame directive Appendix 1
1. General
1.1. Make : Access
1.2. Type : SP250
Variant(s) : 180, 250, 300, 400, 400SI, 450
Version(s) : SP180-S, SP250-S, SP250-U, SP300-S, SP300-U,

SP300-SM, SP400-S, SP400-SM, SP450-S, SP450-
SM, SP450-SA, SP450-SMA, SP400-SI, SP400-
SMI, SP450-SA3, SP450-SMA4
1.3. Name and address of manufacturer : Access Motor Co., Ltd.

1.4. Name and address of manufacturers : Not applicable

authorized representative
2. General arrangement of vehicle
2.1. Category of vehicle : L7e
2.2. Maximum design speed : Version SP250-S: 85 km/h

Version SP250-U: 78 km/h
Version SP180-S: 67 km/h
Versions SP300-S, SP300-SM: 83 km/h
Versions SP450-S, SP450-SM, SP450-SA, SP450-
SMA: 78 km/h in the 5th gear
Versions SP450-SA3, SP450-SMA4: 80 km/h in the
5th gear
Versions SP400-S, SP400-SM, SP400-SI, SP400-
SMI: 80 km/h
According to SD 95/1/EC, amendment 2006/27/EC
Conformity checks : Requirements fulfilled
Approval number : Not applicable
2.3. Wheels

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
2.3.1 Number : 4
2.3.2 Symmetrical or asymmetrical : Symmetrical

configuration
2.4. Frame layout diagram : See drawing No. 71000-A03-H00, 71000-A06-H00,

71000-A12-H01
3. Masses and dimensions : According to SD 93/93/EEC, amendment

2004/86/EC
3.1. Mass of vehicle in running order : See Information Document SP250-2002/24-10, 2.1.
3.1.1 Distribution of that mass between the : See Information Document SP250-2002/24-10,
axles 2.1.1.
3.2. Mass of vehicle in running order : See Information Document SP250-2002/24-10, 2.2.
together with rider
3.2.1 Distribution of that mass between the : See Information Document SP250-2002/24-10,
axles 2.2.1.
3.3. Maximum technically permissible : See Information Document SP250-2002/24-10, 2.3.

mass declared by the manufacturer
3.3.1 Division of that mass between the : See Information Document SP250-2002/24-10,
axles 2.3.1.
3.3.2 Maximum technically permissible : See Information Document SP250-2002/24-10,

mass on the axles 2.3.2.
3.4. Vehicle length : Versions SP180-S, SP250-S, SP300-S, SP450-S,

SP400-S, SP400-SI, SP450-SA, SP450-SA3: 1825
mm
Versions SP250-U, SP300-U: 2060 mm
Versions SP300-SM, SP400-SM, SP400-SMI: 1876
mm
Versions SP450-SM, SP450-SMA, SP450-SMA4:
1860 mm

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
3.5. Vehicle width : Versions SP180-S, SP250-S, SP300-S, SP300-SM,

SP450-SM, SP400-S, SP400-SM, SP450-SMA,
SP400-SI, SP400-SMI, SP450-SMA4: 1230 mm
Versions SP450-S, SP450-SA, SP450-SA3: 1205
mm
3.6. Vehicle height : Versions SP180-S, SP250-S, SP300-S, SP400-S,

SP400-SI: 1140 mm
mm
mm
1025 mm
4. Engine
4.1. Manufacturer of engine : See Information Document SP250-2002/24-10, 3.0.
4.2. Make : See Information Document SP250-2002/24-10, 3.1.
4.3. Type : Variant 180: E09

Variant 250: E10
Variant 300: E11
Variant 450: E12, as option: E1
Variant 400: E17
Variant 400SI: E19
4.4. Spark- or compression-ignition engine : Spark-ignition / compression ignition engine
4.4.1 Operating cycle : See Information Document SP250-2002/24-10,

3.2.1.1.
4.4.2 Cooling system : See Information Document SP250-2002/24-10,

3.2.7.
4.4.3 Lubrication system : Pressure circulation wet-sump system
4.4.4 Number, arrangement and firing order : See Information Document SP250-2002/24-10,
of cylinders 3.2.1.2.
4.4.5 Bore, stroke and cylinder capacity : See Information Document SP250-2002/24-10,
3.2.1.2.1. - 3.2.1.3.

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
4.4.6 Full drawing of induction system : See Information Document SP250-2002/24-10,

3.2.8.3.
4.4.7 Compression ratio : See Information Document SP250-2002/24-10,

3.2.1.4.
4.4.8 Maximum net power and maximum : See Information Document SP250-2002/24-10,
net torque 3.2.1.7. - 3.2.1.8., according to SD 95/1/EC,
amendment 2006/27/EC
Conformity checks : Requirements fulfilled,

for test results see appendix 5
4.4.9 Fuel tank : According to SD 97/24/EC Chapter 6, amendment

2006/120/EC
See Information Document SP250-2002/24-10,
3.2.3.
Conformity checks : Requirements fulfilled, report No. 84-97/2406-

00149/08 (variants 180, 250, 300, 400, 450), 84-
97/2406-00990/10 (variant 400SI)
Approval number (installation) : Not applicable
Approval number (component) : See Information Document SP250-2002/24-10,

3.2.3.4.
4.4.10 Fuel supply : See Information Document SP250-2002/24-10,

3.2.4.
10.15 Anti-tampering measures for mopeds : Not applicable

and motorcycles
Conformity checks : Not applicable
4.4.11 Electrical system : See Information Document SP250-2002/24-10,

3.2.5.
4.4.12 Generator : See Information Document SP250-2002/24-10,

3.2.5.2.

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
10.3. Electromagnetic compatibility : According to SD 97/24/EC Chapter 8, amendment

2006/120/EC
see Information Document SP250-2002/24-10,
3.2.6.8.

10.4. Sound level and exhaust system : According to SD 97/24/EC Chapter 9, amendment
2009/108/EC

10.4.1 Make of exhaust system : See Information Document SP250-2002/24-10,

3.2.9.
10.4.2 Type of exhaust system : One main muffler
10.4.3 Sound level
Stationary noise, dB(A) at min-1 : Version SP250-S: 82 / 3500

Version SP250-U: 81 / 3000
Version SP180-S: 78 / 3250
Versions SP300-S, SP300-SM: 84 / 3750
Version SP300-U: 82 / 3750
Versions SP450-SA, SP450-SMA: 90 / 3000
Versions SP400-SI, SP400-SMI: 80 / 3250
Versions SP450-SA3, SP450-SMA4: 91 / 3000
Noise when in motion in dB(A) : Versions SP250-S, SP180-S, SP450-S, SP300-SM,

SP450-SM, SP400-SM: 79
Versions SP250-U, SP400-S: 80
Version SP300-S: 77
Versions SP300-U, SP400-SI, SP400-SMI: 76
Versions SP450-SA, SP450-SMA, SP450-SA3,
SP450-SMA4: 78

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
4.4.13 Anti-pollution devices : According to SD 97/24/EC Chapter 5, amendment

2009/108/EC

4.5. Electric traction motor : Not applicable
5. Transmission
Type : Manual / automatic (variants 180, 250, 300, 400,

400SI)
Manual / automatic (variant 450)
2.2. Maximum design speed : According to SD 95/1/EC, amendment 2006/27/EC,

see Information Document SP250-2002/24-10, 4.6.

10.12. Speedometer : According to SD 2000/7/EC,

see Information Document SP250-2002/24-10, 4.7

6. Tyres : According to SD 97/24/EC Chapter 1, amendment

2006/120/EC

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
Tyres of any tyre manufacturer may be fitted

provided that they are of the same dimensions, E/e-
mark approved according to ECE-R75 or 97/24/EC,
chapter 1 and of a load index of 20 (front tyre) / 34
(rear tyre) or more for versions SP180-S, SP250-S,
SP300-S, SP450-S, SP300-SM, SP450-SM, SP400-
S, SP400-SM, SP400-SI, SP400-SMI, SP450-SA,
SP450-SMA, SP450-SA3 and SP450-SMA4 and of
a load index of 18 (front tyre) / 38 (rear tyre) or
more for versions SP250-U and SP300-U, a speed
index of G (all tyres for versions SP250-S, SP300-S
and SP300-SM) or more and a speed index of F (all
tyres for versions SP180-S, SP250-U, SP300-U,
SP450-S, SP450-SM, SP400-S, SP400-SM, SP400-
SI, SP400-SMI, SP450-SA, SP450-SMA, SP450-
SA3 and SP450-SMA4) or more.
7. Braking system : According to SD 93/14/EEC, amendment

2006/27/EC,
see Information Document SP250-2002/24-10, 7.

8. Installation of lighting and light- : According to SD 2009/67/EC,

signalling devices See Information Document SP250-2002/24-10, 8.2.
9. Lighting and light-signalling devices : According to SD 97/24/EC Chapter 2, amendment

2006/120/EC,
Approval number : See Information Document SP250-2002/24-10, 8.1.
10. Miscellaneous
10.16. Coupling devices and their attachment : Not applicable

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
10.13. Identification of controls, tell-tales and : According to SD 2009/80/EC,

indicators see Information Document SP250-2002/24-10, 9.2.
10.14. Statutory inscriptions : According to 2009/139/EC,

Location of statutory plate : At the rear side of the frame body
10.8. Devices to prevent unauthorized use : According to SD 93/33/EEC, amendment

1999/23/EC,
10.1. Audible warning device : According to SD 93/30/EEC,


Approval number, annex II : Not applicable

(installation)
Approval number, annex I : See Information Document SP250-2002/24-10,

(component) 9.5.4.
10.2. Location of rear registration plate : According to SD 2009/62/EC,

10.6. External projections : According to SD 97/24/EC Chapter 3, amendment

2006/120/EC

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
B. Information relating solely to two-wheel mopeds and motorcycles
Not applicable
C. Information relating solely to three-wheel mopeds, motorcycles and quadricycles
10.9. Windows : Without (vehicle without bodywork)
10.5. Rear-view mirrors : According to SD 97/24/EC Chapter 4, amendment

2006/120/EC
See Information Document SP250-2002/24-10,
C 2.6.
Approval number (installation) : Not applicable
Approval number (component) : See Information Document SP250-2002/24-10,

C 2.6.2.
10.11. Anchorages for safety belts : Without (vehicle without bodywork)

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
Test minutes of maximum speed Appendix 4
0. Test condition
0.1. Test date : December 24, 2012
0.2. Test site : Tai-Pao / Taiwan
1. Test facilities : The test equipment used was in compliance with the
requirements of the directive.
2. Test vehicle(s)
2.1. Type : SP250

Variant : 450
Version : SP450-SA3, SP450-SMA4
2.2. Identification number : Version SP450-SA3: Engine No. E12R001679,

Version SP450-SMA4: RK3SP12129A000631
3. Atmospheric conditions
3.1. Atmospheric pressure [kPa] : 100
3.2. Temperature [K] : 292
3.3. Relative humidity [%] : 61
3.4. Maximum wind speed [m/sec] : 3
3.5. Type of test track acc. to Annex I, : Type 1

4.2.1
4. Test results
Maximum speed [km/h]

TV Rheinland Group
Test Report No.: 84-2002/24-01532/12
Type : SP250
Version SP450-SA3
Driving direction (W to E) Driving direction (E to W)
Measurement 1 83.3 83.0
Average value (rounded) 82.7
Version SP450-SMA4
Driving direction (W to E) Driving direction (E to W)
Average value (rounded) 81.6

Tel: 886-5-2377870 Fax: 886-5-2377875
Issue date: January 7, 2013 Doc. No.: SP250-2002/24-10
Extension Application
2002/24/EC INFORMATION DOCUMENT

PART 1
A. INFORMATION RELATING JOINTLY TO MOPEDS, MOTOR CYCLES,

MOTOR TRICYCLES AND QUADRICYCLES
0. General
0.1. Make : Access
0.2. Type : SP250
Variant(s) :
180, 250, 300, 400, 400SI, 450
Version(s) :
SP180-S (variant 180)
SP250-S, SP250-U (variant 250)
SP300-S, SP300-U, SP300-SM (variant 300)
SP400-S, SP400-SM (variant 400)
SP400-SI, SP400-SMI (variant 400SI)
SP450-S, SP450-SM, SP450-SA, SP450-SMA,
SP450-SA3, SP450-SMA4 (variant 450)
0.2.1. Commercial name : Access Motor, as option: SS250R, Hammel,

Quadzilla, Bogart Patriot, Nexmotor, Tomahawk,
Apollo, Spike, Speed, Maverick, TKM, FOCUS,
TENA, TRITON, MAX, APACHE, Burelli,
Warrior
0.3. Means of type identification if stated on : ???SP????????????
vehicle
0.3.1. Location of that means of identification : Punched on the right side of frame body, see
drawing no: 71000-A03-H00 (versions SP180-S,
SP250S, SP300-S, SP300-SM, SP400-S, SP400-
SM, SP400-SI, SP400-SMI), 71000-A06-H00
(versions SP250-U, SP300-U), 71000-A12-H01
(Variant 450)
0.4. Vehicle category : L7e
0.5. Name and address of manufacturer : Access Motor Co., Ltd.
Address No. 5, Chung-Hsin Rd., Chia-Tai Industrial Zone,
0.5.1. Name(s) and address(s) of assembly plants : Access Motor Co., Ltd.
0.6. Name and address of manufacturers : N/A
authorized representative, if any
PAGE 1 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
0.7. Location and method of affixing statutory : Riveted on the rear side of the frame body, see
inscriptions to the chassis drawing no: 71000-A03-H00 (versions SP180-S,
SP250S, SP300-S, SP300-SM, SP400-S, SP400-
SM, SP400-SI, SP400-SMI), 71000-A06-H00
(Variant 450)
0.7.1. The serial numbering of the type begins : Version SP180-S: RK3SP07096A000001
with No. Version SP250-S: RK3SP03106A000001
Version SP250-U: RK3SP06106A000001
Version SP300-S: RK3SP03116A000001
Version SP300-U: RK3SP06116A000001
Version SP300-SM: RK3SP19119A000001
Version SP450-SA: RK3SPA1E10A000001
Version SP450-SMA: RK3SPA2E10A000001
Version SP400-SI: RK3SP26190A000001
Version SP400-SMI: RK3SP28190A000001
Version SP450-SA3: RK3SPA3E11A000001
Version SP450-SMA4: RK3SPA4E11A000001
0.8. Position and method of affixing the : Components approval marks are fixed by mold ,
component type-approval mark for engraving of sticker to the components.
components and separate technical units
1. General arrangement of vehicles
1.1. Photos and/or drawings of a typical vehicle : See drawing no: 70000-A03-H21, 70000-A03-
H32, 70000-A03-H40, 70000-A03-H50 (versions
SP180-S, SP250-S, SP300-S, SP400-S, SP400-SI),
70000-A06-H20 (versions SP250-U, SP300-U),
70000-A12-H21 (versions SP450-S, SP450-SA,
SP450-SA3), 70000-A12-H30 (version SP450-
SA3), 70000-A19-H21, 70000-A19-H32, 70000-
A19-H40, 70000-A19-H50 (versions SP300-SM,
SP400-SM, SP400-SMI), 70000-A20-H11
(versions SP450-SM, SP450-SMA, SP450-
SMA4), 70000-A20-H20 (version SP450-SMA4)
1.2. Dimensional drawing of the complete : See drawing no: 70000-A03-H21, 70000-A03-
vehicle H32, 70000-A03-H40, 70000-A03-H50 (versions
SP180-S, SP250-S, SP300-S, SP400-S, SP400-SI),
70000-A06-H20 (versions SP250-U, SP300-U),
70000-A12-H21 (versions SP450-S, SP450-SA,
SP450-SA3), 70000-A12-H30 (version SP450-
SA3), 70000-A19-H21, 70000-A19-H32, 70000-
A19-H40, 70000-A19-H50 (versions SP300-SM,
SP400-SM, SP400-SMI), 70000-A20-H11
(versions SP450-SM, SP450-SMA, SP450-
PAGE 2 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
1.2.1. Wheelbase : 1270 mm

1.3. Number of axles and wheels : Two axles, two wheels on each axle
1.4. Position and arrangement of engine : Central and longitudinal
1.5. Number of seating positions : 2
1.6. Hand of drive left or right : N/A
1.6.1. Vehicle is equipped to be driven in right- : Versions SP180-S, SP250-S, SP300-S, SP450-S,
hand or left-hand rule of the road traffic SP300-SM, SP450-SM, SP400-S, SP400-SM,
SP450-SA, SP450-SMA, SP400-SI, SP400-SMI, ,
SP450-SA3, SP450-SMA4: both hands rule of the
road traffic
Versions SP250-U, SP300-U: right-hand rule of
the road traffic
2. Masses
2.0. Unladen mass : Version SP180-S: 195 kg
Version SP250-S: 211 kg
Version SP250-U: 243 kg
kg
Version SP300-SM: 224 kg
226 kg
Versions SP400-S, SP400-SI: 217 kg
Versions SP400-SM, SP400-SMI: 226 kg
2.1. Mass of vehicle in running order : Version SP180-S: 205 kg
kg
236 kg
PAGE 3 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
2.1.1. Distribution of that mass between the axles : Version SP180-S: Front- 99 kg, rear- 106 kg
Version SP250-S: Front- 109 kg, rear- 112 kg
Version SP250-U: Front- 124 kg, rear- 129 kg
Versions SP450-S, SP450-SA, SP450-SA3: Front-
111 kg, rear- 118 kg
Version SP300-SM: Front- 118 kg, rear- 116 kg
Front- 117 kg, rear- 119 kg
Versions SP400-S, SP400-SI: Front- 113 kg, rear-
114 kg
Versions SP400-SM, SP400-SMI: Front- 119 kg,
rear- 117 kg
2.2. Mass of vehicle in running order, together : Version SP180-S: 280 kg
with rider Version SP250-S: 296 kg
kg
311 kg
2.2.1. Distribution of that mass between the axles : Version SP180-S: Front- 123 kg, rear- 157 kg
164 kg
rear- 168 kg
PAGE 4 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
2.3. Maximum technically permissible mass : Version SP180-S: 355 kg

declared by the manufacturer Version SP250-S: 371 kg
kg
386 kg
2.3.1. Division of that mass between the axles : Version SP180-S: Front- 126 kg, rear- 229 kg
236 kg
rear- 226 kg
2.3.2. Maximum technically permissible mass on : Front- 160 kg, rear- 236 kg (versions SP180-S,
each of the axles SP250-S, SP300-S, SP400-S,SP450-S, SP450-SA
SP300-SM. , SP400-SM ,SP450-SM, SP450-
SMA, SP400-SI, SP400-SMI, SP450-SA3, SP450-
SMA4)
Front- 149 kg, rear- 262 kg (versions SP250-U,
SP300-U)
2.4. Maximum hill-starting ability at the : 10
maximum technically permissible mass
declared by the manufacturer
2.5. Maximum tow-able mass : N/A
2.6. Maximum mass of the combination : N/A
3. Engine
3.0. Manufacturer : Access Motor Co., Ltd.
3.1. Make : Access
3.1.1. Type : Variant 180: E09
Variant 250: E10
Variant 300: E11
Variant 450: E12, as option: E1
Variant 400: E17
Variant 400SI: E19
PAGE 5 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.1.2. Location of engine number : Left side of the crankcase

3.2. Spark- or compression-ignition engine
3.2.1. Specific characteristics of the engine
3.2.1.1. Operating cycle : Spark ignition, four stroke
3.2.1.2. Number , arrangement and firing order of : Variants 250, 300, 400, 450, 400SI: one, vertical
cylinders Variant 180: one, horizontal
3.2.1.2.1. Bore : Variant 180: 61.0 mm
Variant 250: 71.0 mm
Variants 400, 400SI: 78.0 mm
3.2.1.2.2. Stroke : Variant 180: 57.8 mm
Variants 400, 400SI: 75.2 mm
3.2.1.3. Cylinder capacity : Variant 180: 168.9 cc
Variant 250: 249.4 cc
Variants 400, 400SI: 359.3 cc
3.2.1.4. Compression ratio : 11.0 0.1: 1 (variants 180, 250, 300, 400, 400SI)
11.8 0.2: 1 (variant 450)
3.2.1.5. Drawings of cylinder head, piston(s), : See drawing no: 12100-E10-H00, 12200-E10-
piston rings and cylinder(s) H00, 13300-E10-000, 13310-E10-010~1, 13310-
E10-010~2, 13310-E10-010~3 (variant 250)
12100-E11-H00, 12200-E11-H00, 13300-E11-
000, 13310-E11-000~1, 13310-E11-000~2,
13310-E11-000~3 (variant 300)
12100-E09-000~1, 12100-E09-000~2, 12200-
E09-H00, 13300-E09-000, 13310-E09-000~1,
13310-E09-000~2, 13310-E09-000~3 (variant
180)
12100-E12-H00, 13310-E12-000, 12200-E12-H00
(versions SP450-S, SP450-SM)
12100-E12-H10, 12200-E12-H10, 13300-E12-
100, 13310-E12-100-1, 13310-E12-100-2, 13310-
E12-100-3 (versions SP450-SA, SP450-SMA,
SP450-SA3, SP450-SMA4)
12100-E17-H00, 12200-E17-000, 13300-E17-000,
13310-E17-000~1, 13310-E17-000~2, 13310-
E17-000~3 (versions SP400-S, SP400-SM)
12100-E17-H00, 12200-E19-H00, 13300-E17-
000, 13310-E17-000~1, 13310-E17-000~2,
13310-E17-000~3 (versions SP400-SI, SP400-
SMI)
PAGE 6 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.2.1.6. Idling speed min-1 : Version SP180-S: 1800 100 min-1

Version SP250-S: 1600 100 min-1
Version SP250-U: 1800 100 min-1
Versions SP300-S, SP300-SM, SP400-S, SP400-
SM, SP400-SI, SP400-SMI: 1600 100 min-1
Version SP300-U: 1600 100 min-1
Versions SP450-S , SP450-SM , SP450-SA ,
SP450-SMA, SP450-SA3, SP450-SMA4: 1800
100 min-1
3.2.1.7. Maximum net power output : Version SP180-S: 9.1 kW at 6500 min-1
Version SP250-S: 12.9 kW at 7000 min-1
Version SP250-U: 12.6 kW at 6000 min-1
Versions SP300-S, SP300-U, SP300-SM:
14.2 kW at 7500 min-1
Versions SP450-S, SP450-SM : 14.4 kW at 6500
min-1
Versions SP400-S, SP400-SM : 14.5 kW at 6200
min-1
SP450-SMA4: 15.0 kW at 6000 min-1
Versions SP400-SI, SP400-SMI: 14.1 kW at 6500
min-1
3.2.1.8. Net maximum torque : Version SP180-S: 14.1 Nm at 5500 min-1
Version SP250-S: 21.0 Nm at 3500 min-1
Version SP250-U: 21.3 Nm at 2500 min-1
Versions SP300-S, SP300-U, SP300-SM:
22.0 Nm at 3500 min-1
Versions SP450-S, SP450-SM: 55.7 Nm at 4500
min-1
Versions SP400-S, SP400-SM:
23.7 Nm at 5700 min-1
Versions SP450-SA, SP450-SMA: 25.6 Nm at
4500 min-1
Versions SP400-SI, SP400-SMI: 22.1 Nm at 4500
min-1
Versions SP450-SA3, SP450-SMA4: 27.0 Nm at
5000 min-1
3.2.2. Fuel : Diesel/ petrol/ mixture/ LPG/ other
3.2.3. Fuel tank
3.2.3.1. Maximum capacity : 14.8 0.2 L (variants 180, 250, 300, 400, 400SI)
14.0 0.2 L (variant 450)
3.2.3.2. Drawing of tank with indication of : See drawing no:12100-A03-H00 (variants 180,
materials used 250, 300, 400), 12100-A12-H00 (variant 450),
12100-A26-H00 (variant 400SI)
3.2.3.3. Diagram clearly indicating the position of : See drawing no:12100-A03-H00 (variants 180,
the tank on the vehicle 250, 300, 400), 12100-A12-H00 (variant 450),
12100-A26-H00 (variant 400SI)
3.2.3.4. Approval number of the fuel tank fitted : N/A
PAGE 7 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.2.4. Fuel supply

3.2.4.1. Via carburetor(s) : Yes / no (variants 180, 250, 300, 400, 450)
3.2.4.1.1. Make(s) : Variants 250, 300, 400, 450: Mikuni
Variant 180: KEIHIN
3.2.4.1.2. Type(s) : Version 180-S: TKBF-029
Versions SP250-S, SP300-S, SP300-SM, SP300-
U, SP400-S, SP400-SM: BSR33
Version SP250-U: 26-6727
Versions SP450-S, SP450-SM: BSR42/HP89
SP450-SMA4: BSR42/HP89 A
3.2.4.1.3. Number fitted : 1
3.2.4.1.4. Settings
3.2.4.1.4.1. Diffusers : Venturi, see drawing no: 16100-E10-H00,
16100-E10-H10, 16100-E09-H00,
16100-E12-H00, 16100-E12-H10
3.2.4.1.4.2. Level in float chamber : (BSR33) 31.5 0.5 mm
(26-6727) 32.5 0.5 mm
(TKBF-029) 17.5 0.5 mm
(BSR42/HP89, BSR42/HP89 A) 13.0 0.5 mm
3.2.4.1.4.3. Mass of float : (BSR33) 10 0.2 g
(26-6727) 9.5 0.3 g
(TKBF-029) 7.5 0.2 g
(BSR42/HP89, BSR42/HP89 A) 10.0 0.2 g
3.2.4.1.4.4. Float needle : (BSR33) 5 mm
(26-6727) 1.8 mm
(TKBF-029) 2 mm
(BSR42/HP89, BSR42/HP89 A) 1.5 mm
3.2.4.1.4.5. Fuel curve as a function of the air flow and : N/A
settings required in order to maintain that
curve
3.2.4.1.5. Cold-starting system : Manual / automatic (variants 180, 250, 300, 400,
450)
3.2.4.1.5.1. Operating principle(s) : Enrich the air fuel mixture rate by using the choke
mechanism to assist the cold starting. The choke
is controlled by choke switch.
3.2.4.2. By fuel injection (solely in the case of : Yes / no
compression ignition)
3.2.4.2.1. Description of system : N/A
3.2.4.2.2. Operating principle direct / indirect / : N/A
turbulence chamber injection
3.2.4.2.3. Injection pump N/A
3.2.4.2.3.1. Make(s) : N/A
3.2.4.2.3.2. Type(s) : N/A
PAGE 8 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.2.4.2.3.3. Maximum fuel flow rate mm3 / per stroke : N/A

or cycle at a pump rotational speed of min-1
or characteristic diagram
3.2.4.2.3.4. Injection advance : N/A
3.2.4.2.3.5. Injection advance curve : N/A
3.2.4.2.3.6. Calibration procedure: test bench/engine : N/A
3.2.4.2.4. Regulator N/A
3.2.4.2.4.1. Type : N/A
3.2.4.2.4.2. Cut-off point : N/A
3.2.4.2.4.2.1. Cut-off point under load : N/A
3.2.4.2.4.2.2. Cut-off point under no load : N/A
3.2.4.2.4.3. Idling speed : N/A
3.2.4.2.5. Injection pipework N/A
3.2.4.2.5.1. Length : N/A
3.2.4.2.5.2. Internal diameter : N/A
3.2.4.2.6. Injector(s) N/A
either
3.2.4.2.6.1. Make(s) : N/A
3.2.4.2.6.2. Type(s) : N/A
3.2.4.2.6.3. Opening pressure or characteristic diagram : N/A
3.2.4.2.7. Cold starting system N/A
Either
3.2.4.2.7.1. Make(s) : N/A
3.2.4.2.7.2. Type(s) : N/A
3.2.4.2.7.3. Description : N/A
3.2.4.2.8. Secondary starting device : N/A
3.2.4.2.8.1. Make(s) : N/A
3.2.4.2.8.2. Type(s) : N/A
3.2.4.2.8.3. Description of system : N/A
3.2.4.3. By fuel injection (solely in the case of : Yes / no (variant 400SI)
spark-ignition)
3.2.4.3.1. Description of system : EFI (Electronic Fuel Injection system integrating
with O2 sensor feedback)
3.2.4.3.2. Operating principle: injection into : Single point injection
Induction manifold (single/ multiple
point)/direct injection/ other(state which)
3.2.4.3.2.1. Make(s) of the injection pump : Dun Young
3.2.4.3.2.2. Type(s) of the injection pump : 300-0001390(Y)477 ( 25360406 & B-13)
PAGE 9 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.2.4.3.3. Injectors: opening pressure : 300 kPa @ 12V

or characteristic diagram
3.2.4.3.4. Injection advance : 0~360 CA
3.2.4.3.5. Cold-starting system Included in the EFI system
3.2.4.3.5.1. Operating principle(s) : A/F ratio controlled by the EFI system (dependent
on the parameter of the water temp.)
3.2.4.3.5.2. Operating/setting limits : -20 C~ 40 C
3.2.4.4. Fuel pump : Yes / no (variant 400SI)
3.2.5. Electrical equipment
3.2.5.1. Nominal voltage : 12V, negative earth
3.2.5.2. Generator
3.2.5.2.1. Type : Variants 250, 300, 400, 400SI: V55
Variant 180: GY8
Variant 450: HANMA
3.2.5.2.2. Nominal power : Variants 250, 300, 400, 400SI: 210 5 W
Variant 180: 105 5 W
Variant 450: 280 5 W
3.2.6. Ignition
3.2.6.1. Make (s) : Variants 180, 250, 300, 400: EYANG
Variant 400SI: Dun Young
Variant 450: LANGFANG KOKUSAN (for
versions SP450-S, SP450-SM) or Taiwan Shone
Che (for versions SP450-SA, SP450-SMA,
SP450-SA3, SP450-SMA4)
3.2.6.2. Type(s) : Variants 250, 300, 400: 61115-A03-000
Variant 180: 61115-A07-000
Variant 450: 32900HP89 (for versions SP450-S,
SP450-SM), 61115-A12-100 (for versions SP450-
SA, SP450-SMA, SP450-SA3, SP450-SMA4)
Variant 400SI: 61115-A26-000
3.2.6.3. Operating principle : Condenser discharge ignition (for variants 180,
250, 300, 400, 450)
Electronic Control Unit (for variant 400SI)
3.2.6.4. Ignition advance curve or operating set : See drawing no: 61115-A03-000 (variants 250,
point 300, 400), 61115-A07-000 (variant 180), 61115-
A12-000 (versions SP450-S, SP450-SM), 61115-
A12-100 (for versions SP450-SA, SP450-SMA,
SP450-SA3, SP450-SMA4), 61115-A26-000
(variant 400SI)
3.2.6.5. Static timing : Variants 250, 300, 400, 400SI: 5 before TDC
Variant 180: 14 before TDC
Variant 450: 6 before TDC
3.2.6.6. Points gap : N/A
PAGE 10 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.2.6.7. Dwell angle : N/A

3.2.6.8. Anti-radio interference system : Spark plug cap with resistor and resistor spark
plug
3.2.6.8.1. Terminology and drawing of anti-radio : Spark plug: NGK R DPR7EA 9, see drawing no:
interference equipment 61109-A03-000 (variants 250, 300)
Spark plug: NGK R CR7HSA, see drawing no:
61109-A07-000 (variant 180)
Spark plug: NGK R CR8E, see drawing no:
61109-A12-000 (variant 400, versions SP450-S,
SP450-SM)
61109-A12-100 (versions SP450-SA, SP450-
SMA, SP450-SA3, SP450-SMA4)
61109-A26-000 (variant 400SI)
3.2.6.8.2. Indication of the nominal DC resistance : Plug cap: 10 1 k, Spark plug: 5 0.5 k
value and, in the case of resistive ignition (variants 250, 300)
lead, statement of nominal resistance per Plug cap: 5 1 k, Spark plug: 5 0.5 k (variant
metre 180)
Plug cap: 10 1 k, Spark plug: 5 1 k (variant
450)
Plug cap: 22 1 k, Spark plug: 5 1 k (variant
400)
Ignition coil (including plug cap): 10 1 k,
Spark plug: 5 1 k (variant 400SI)
3.2.7. Cooling system : Liquid (variants 250, 300, 400, 450, 400SI)
Air (variant 180)
3.2.7.1. Nominal setting for the engine-temperature : Control valve opened when water is more than
control device 75 4 C (variants 250, 300, 400, 450, 400SI)
3.2.7.2. Liquid
3.2.7.2.1. Nature of liquid : Long life coolant additive: 50%, water: 50%
3.2.7.2.2. Circulating pump(s) : Yes / no
3.2.7.3. Air
3.2.7.3.1. Blower : Yes / no (variant 180)
3.2.8. Induction system
3.2.8.1. Supercharging : Yes / no
3.2.8.1.1. Make(s) : N/A throttle body
3.2.8.1.2. Type(s) : N/A
3.2.8.1.3. Description of system : N/A
3.2.8.2. Intercooler : With / without
PAGE 11 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.2.8.3. Description and drawings of induction : See drawing no: 16410-E10-010, 12166-A03-000
pipework and accessories (plenum (variants 250, 300, 400)
chamber, heating device, additional air See drawing no: 16410-E09-000, 12166-A01-000
intakes, etc.) (variant 180)
See drawing no: 16410-E12-000, 12166-A12-000
(variant 450)
See drawing no: 16410-E19-000 (variant 400SI)
3.2.8.3.1. Description of induction manifold : See drawing no: 16410-E10-010, 16410-E09-000,
16410-E12-000, 16410-E19-000
3.2.8.3.2. Air filter, drawings : See drawing no: 17300-E10-000 (variants 250,
300, 400), 17300-E09-000 (variant 180), 17300-
E12-000~1, 17300-E12-000~2, 17300-E12-000~3
(variant 450), 17300-E19-000~1, 17300-E12-
000~2, 17300-E12-020~3 (variant 400SI)
3.2.8.3.2.1. Make(s) : LIAN WANG (variants 250, 300, 400)
SHEN YANG (variant 180)
CHINA OCEAN (variants 450, 400SI)
3.2.8.3.2.2. Type(s) : Variants 250, 300, 400: A03 (marking: 17300-
E10-000)
Variant 180: A07 (marking: 17300-E09-000)
Variant 450: A12 (marking: 17300-E12-000)
Variant 400SI: A12SI (marking: 17300-E12-000)
3.2.8.3.3. Inlet silencer, drawings : See drawing no: 17320-E10-000 (variants 250,
300, 400), 17320-E09-000 (variant 180), 17320-
E12-000 (variants 450, 400SI)
3.2.8.3.3.1 Make(s) : LIAN WANG (variants 250, 300, 400)
SHEN YANG (variant 180)
CHINA OCEAN (variant 450, 400SI)
3.2.8.3.3.2 Type(s) : A03 (variants 250, 300, 400)
A07 (variant 180)
A12 (variants 450, 400SI)
3.2.9. Exhaust system
3.2.9.1. Drawing of complete exhaust system : See drawing no:
12160-A03-H00 (versions SP250-S, SP300-S,
SP300-SM, SP400-S, SP400-SM)
12160-A06-H00 (versions SP250-U, SP300-U)
12160-A07-H00 (version SP180-S)
12160-A12-H01 (versions SP450-S, SP450-SM,
SP450-SA, SP450-SMA)
12160-A26-000, 12164-A26-000 (versions SP400-
SI, SP400-SMI)
12160-A12-H10 (versions SP450-SA3, SP450-
SMA4)
3.2.10. Minimum cross-section of the inlet and : See drawing no: 12200-E10-H00, 12200-E11-
exhaust ports H00, 12200-E09-H00, 12200-E12-H00, 12200-
E17-000, 12200-E12-H10, 12200-E19-H00
3.2.11. Induction system or equivalent data
PAGE 12 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.2.11.1. Maximum, valve lift, opening and closing : See drawing no.
angles in relation to the dead centres, or 25100-E10-H00 (variant 250)
data concerning the settings of other 25100-E11-H00 (variant 300)
possible systems 25100-E09-H00 (variant 180)
25100-E12-H00 (variant 450)
25100-E17-H00 (variants 400, 400SI)
3.2.11.2. Reference and/or setting ranges : 0.06~ 0.1 mm (variants 180, 250, 300, 400, 400SI)
Inlet: 0.1~ 0.2 mm, Outlet: 0.2~ 0.3 mm (variant
450)
3.2.12. Measures taken against air pollution
3.2.12.1. Device for recycling crankcase gases, : See drawing no: 11350-E10-H10 (variants 250,
solely in the case of four-stroke engines 300), 11350-E09-H10 (variant 180), 11350-E12-
H00 (variant 450), 11350-E17-H00(variants 400,
400SI)
3.2.12.2. Additional anti-pollution devices (if any, : No
and if not covered by another heading)
3.2.12.2.1. Catalytic converter : Yes / no
3.2.12.2.1.1. Number of catalytic converters and : 1
elements
3.2.12.2.1.2. Dimensions, shape and volume of the : See drawing no.12165-A01-000 (variants 180,
catalytic converter(s) 250, 300, 400, 400SI), 12165-A12-000 (variant
450)
3.2.12.2.1.3. Type of catalytic action : 3 way catalytic converter
3.2.12.2.1.4. Total charge of precious metal : See drawing no.12165-A01-000 (variants 180,
250, 300, 400, 400SI), 12165-A12-000 (variant
450)
3.2.12.2.1.5. Relative concentration : See drawing no.12165-A01-000 (variants 180,
250, 300, 400, 400SI), 12165-A12-000 (variant
450)
3.2.12.2.1.6. Substrtae (structure and material) : See drawing no.12165-A01-000 (variants 180,
250, 300, 400, 400SI), 12165-A12-000 (variant
450)
3.2.12.2.1.7. Cell density : 100 cpsi
3.2.12.2.1.8. Type of casing for the catalytic converter : See drawing no.12165-A01-000 (variants 180,
(s) 250, 300, 400, 400SI), 12165-A12-000 (variant
450)
PAGE 13 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.2.12.2.1.9. Location of the catalytic converter(s) : See drawing no:

12160-A03-H00 (versions SP250-S, SP300-S,
SP300-SM, SP400-S, SP400-SM)
12160-A06-H00 (versions SP250-U, SP300-U)
12160-A07-H00 (version SP180-S)
12160-A12-H01 (versions SP450-S, SP450-SM,
SP450-SA, SP450-SMA)
12160-A26-000, 12164-A26-000 (versions SP400-
SI, SP400-SMI)
12160-A12-H10 (versions SP450-SA3, SP450-
SMA4)
3.2.12.2.2. Oxygen sensor : Yes / no (for variant 400SI)
3.2.12.2.2.1. Type : 4W002
3.2.12.2.2.2. Location : See drawing no. 63215-A26-H00
3.2.12.2.2.3. Control range : Rich>650mv, Lean<250mv
3.2.12.2.3. Air injection : Yes / no
3.2.12.2.3.1. Type : Pulse air
3.2.12.2.4. Exhaust gas recirculation : Yes / no
3.2.12.2.4.1. Characteristics : N/A
3.2.12.2.5.. Other systems : N/A
3.2.13. Location of the coefficient of absorption : N/A
symbol
3.3. Electric traction motor
3.3.1. Type : N/A
3.3.1.1. Maximum continuous rated power : N/A
3.3.1.2. Operating voltage : N/A
3.3.2. Battery
3.3.2.1. Number of cells : N/A
3.3.2.2. Mass : N/A
3.3.2.3. Capacity : N/A
3.3.2.4. Location : N/A
3.4. Other motors or combinations of motors : N/A
3.5. Cooling system temperatures permitted by
the manufacturer
3.5.1. Liquid cooling
3.5.1.1. Maximum temperature at outlet : 90 C (variants 250, 300, 400, 450, 400SI)
3.5.2. Air cooling
3.5.2.1. Reference point : Seat of spark plug (variant 180)
3.5.2.2. Maximum temperature at reference point : 230 C (variant 180)
PAGE 14 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
3.6. Lubrication system

3.6.1. Description of system : Lubricant oil splashed to the cylinder camshaft by
oil pump
3.6.1.1. Location of oil reservoir : Below the crankcase
3.6.1.2. Feed system : Oil pump
3.6.2. Lubricant mixed with the fuel
3.6.2.1. Percentage : N/A
3.6.3. Oil cooler : Yes / no (variant 180)
3.6.3.1. Drawing(s) : See drawing no: 15120-E09-000
3.6.3.1.1. Make(s) : LIANKUANN
3.6.3.1.2. Type(s) : 9705311
4. Transmission
4.1. Diagram of transmission system : See drawing no:
22100-E10-H01 (version SP250-S)
22100-E10-H11 (versions SP250-U, SP300-U)
22100-E11-H01 (version SP300-S)
22100-E09-H00 (version SP180-S)
22100-E12-H01 (versions SP450-S, SP450-SA,
SP450-SA3)
22100-A19-H01 (version SP300-SM)
22100-A20-H01 (versions SP450-SM, SP450-
SMA, SP450-SMA4)
22100-E17-H00 (versions SP400-S, SP400-SI)
22100-A22-H00 (versions SP400-SM, SP400-
SMI)
4.2. Type : CVT

4.3. Clutch : Centrifugal
4.4. Gearbox
4.4.1. Type : Automatic / manual (variants 180, 250, 300, 400,
400SI)
Automatic / manual (variant 450)
4.4.2. Method of selection : By hand / foot (variants 180, 250, 300, 400,
400SI)
By hand / foot (variant 450)
4.5. Gear ratios
PAGE 15 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
Version SP250-S
N R1 R2 R3 Rt
Minimum continuously 1:1 1st gear: 1:13.062 1:2.667 1st gear: 1:34.836
variable transmission D gear: 1:8.432 D gear: 1:22.488
1
2

Maximum continuously 1:1 1st gear: 1:4.339 1:2.667 1st gear: 1:11.572
Reverse gear 1:1 1:20.498 1:2.667 1:54.668

N : gear ratio
R1 : primary ratio (ratio of engine speed to rotational speed of primary gearbox shaft).
R2 : secondary ratio (ratio of rotational speed of primary shaft to rotational speed of secondary
shaft in gearbox).
R3 : final drive ratio (ratio of rotational speed of gearbox output shaft to rotational speed of
driven wheels).
Rt : overall ratio
Versions SP250-U, SP300-U

N R1 R2 R3 Rt
st st
Minimum continuously 1:1 1 gear: 1:13.062 1:2.857 1 gear: 1:37.318
1
2

Reverse gear 1:1 1:20.498 1:2.857 1:58.563

N : gear ratio
shaft in gearbox).
driven wheels).
Rt : overall ratio
PAGE 16 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
Version SP300-S
N R1 R2 R3 Rt
1
2

Reverse gear 1:1 1:20.498 1:2.353 1:48.232

N : gear ratio
shaft in gearbox).
driven wheels).
Rt : overall ratio
Version SP180-S
N R1 R2 R3 Rt
Minimum continuously 1:1 1:21.754 1:1.778 1:38.679
variable transmission
1
2

Maximum continuously 1:1 1:5.561 1:1.778 1:9.887
variable transmission
Reverse gear 1:1 1:31.507 1:1.778 1:56.019

N : gear ratio
shaft in gearbox).
driven wheels).
Rt : overall ratio
PAGE 17 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
Versions SP450-S, SP450-SA, SP450-SA3

N R1 R2 R3 Rt
Minimum -- -- -- --
continuously variable
transmission
1 1: 2.5 1: 2.538 1: 3.143 1: 19.942
2 1: 2.5 1: 1.684 1: 3.143 1: 13.232
3 1: 2.5 1: 1.261 1: 3.143 1: 9.908
4 1: 2.5 1: 1.040 1: 3.143 1: 8.172
5 1: 2.5 1: 0.885 1: 3.143 1: 6.954
Maximum -- -- -- --
transmission
Reverse gear 1: 2.5 1: 2.231 1: 3.143 1: 17.530
N : gear ratio
shaft in gearbox).
driven wheels).
Rt : overall ratio
Version SP300-SM
N R1 R2 R3 Rt
st st
1
2

Reverse gear 1:1 1:20.498 1:2.133 1:43.722

N : gear ratio
shaft in gearbox).
driven wheels).
Rt : overall ratio
PAGE 18 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
Versions SP450-SM, SP450-SMA, SP450-SMA4

N R1 R2 R3 Rt
Minimum -- -- -- --
transmission
1 1: 2.5 1: 2.538 1: 2.714 1: 17.220
2 1: 2.5 1: 1.684 1: 2.714 1: 11.426
3 1: 2.5 1: 1.261 1: 2.714 1: 8.556
4 1: 2.5 1: 1.040 1: 2.714 1: 7.056
5 1: 2.5 1: 0.885 1: 2.714 1: 6.005
Maximum -- -- -- --
transmission
Reverse gear 1: 2.5 1: 2.231 1: 2.714 1: 15.137
N : gear ratio
shaft in gearbox).
driven wheels).
Rt : overall ratio
Versions SP400-S, SP400-SI

N R1 R2 R3 Rt
st st
1
2

Reverse gear 1:1 1:16.456 1:2.353 1:38.721

N : gear ratio
shaft in gearbox).
driven wheels).
Rt : overall ratio
PAGE 19 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
Version SP400-SM, SP400-SMI

N R1 R2 R3 Rt
1
2

Reverse gear 1:1 1:16.456 1:1.882 1:30.970

N : gear ratio
shaft in gearbox).
driven wheels).
Rt : overall ratio
4.5.1. Brief description of the electrical and/or : N/A

electronic components used in the
transmission
4.6. Maximum speed of vehicle and gear in : Version SP180-S: 67 km/h
which it is reached Version SP250-S: 85 km/h
Versions SP300-S, SP300-SM: 83 km/h
Versions SP450-S, SP450-SM, SP450-SA, SP450-
SMA: 78 km/h in the 5th gear
Versions SP450-SA3, SP450-SMA4: 80 km/h in
the 5th gear
Versions SP400-S, SP400-SM, SP400-SI, SP400-
SMI: 80 km/h
4.7. Speedometer
4.7.1. Make(s) : KOSO
4.7.2. Type(s) : BC-SA (versions SP250-S, SP250-U, SP300-S,
SP300-U, SP400-S)
BC-SA-1 (version SP400-SI)
BB020-B20 (version SP180-S)
BC-SC (versions SP450-S, SP450-SA, SP450-SA3)
P300 (versions SP300-SM, SP400-SM, SP450-SM,
SP180-S, SP250-S, SP300-S, SP400-S, SP450-S,
SP450-SA, SP450-SMA, SP450-SA3, SP450-
SMA4)
P300-1 (versions SP400-SI, SP400-SMI)
PAGE 20 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
4.7.3. Photographs and/or drawings of the : See drawing no:

complete system 63300-A03-010 (BC-SA)
63300-A26-H00 (BC-SA-1)
63300-A07-000 (BB020-B20)
63300-A12-H00 (BC-SC)
63300-P300-000 (P300)
63300-A28-H00 (P300-1)
62120-A03-H00
4.7.4. speed range displayed : 0~ 199 km/h (BC-SA, BB020-B20, BC-SC, BC-
SA-1)
0~ 360 km/h (P300, P300-1)
PAGE 21 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
4.7.5. Tolerance of the measuring mechanism of : Versions SP250-S, SP300-S, SP400-S (speedometer
the speedometer type: BC-SA); Version SP400-SI (speedometer
type: BC-SA-1)
km/h 40 60
Tolerance 0~ +5 % 0~ +8.3 %
Tolerance 0~ 2.0 km/h 0~ 5 km/h
Range
Versions SP250-U, SP300-U
km/h 40 60
Tolerance 0~ +2.5 % 0~ +3.3 %
Range
Version SP180-S (speedometer type: BB020-B20)
km/h 40
Tolerance 0~ +5 %
Tolerance 0~ 2.0 km/h
Range
Versions SP450-S, SP450-SA, SP450-SA3
(speedometer type: BC-SC)
km/h 40 62
Tolerance 0~ +7.5 % 0~ +6.5 %
Tolerance 0~ 3.0 km/h 0~ 4.0 km/h
Range
Versions SP180-S, SP250-S, SP300-S, SP400-S,
SP450-S, SP450-SA, SP450-SA3 (speedometer
type: P300); Version SP400-SI (speedometer type:
P300-1)
km/h 40 66
Tolerance 0~ +2.5 % 0~ +3.0 %
Tolerance 0~ 1.0 km/h 0~ 2.0 km/h
Range
Versions SP300-SM, SP450-SM, SP400-SM,
SP450-SMA, SP450-SMA4 (speedometer type:
P300); Version SP400-SMI (speedometer type:
P300-1)
km/h 40 66
Tolerance 0~ +5 % 0~ +6.1 %
Range
PAGE 22 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
4.7.6. Technical constant of the speedometer : BC-SA:

- setting parameter: 1676 (versions SP250-S,
SP300-S, SP400-S);
- setting parameter: 2020 (versions SP250-U,
SP300-U)
BC-SA-1:
- setting parameter: 1676 (version SP400-SI)
BB020-B20:
- setting parameter: 1676 (version SP180-S)
BC-SC:
SP450-SA, SP450-SA3)
P300:
- setting parameter: 1520 (versions SP300-SM,
SP400-SM, SP450-SM, SP450-SMA, SP450-
SMA4);
SP250-S, SP300-S, SP400-S, SP450-S, SP450-SA,
SP450-SA3)
P300-1:
- setting parameter: 1520 (version SP400-SMI);
- setting parameter: 1690 (version SP400-SI)
4.7.7. Method of operation and description of the : Magnetic detect, digital display with back-lighting
drive mechanism
4.7.8. Overall transmission ratio of the drive : N/A
mechanism
5. Suspension
5.1. Drawing of suspension arrangement : See drawing no: 70000-A03-H21, 70000-A03-H32,
70000-A03-H40, 70000-A03-H50 (versions SP180-
S, SP250-S, SP300-S, SP400-S, SP400-SI), 70000-
A06-H20 (versions SP250-U, SP300-U), 70000-
A12-H21 (versions SP450-S, SP450-SA, SP450-
SA3), 70000-A12-H30 (version SP450-SA3),
70000-A19-H21, 70000-A19-H32, 70000-A19-
H40, 70000-A19-H50 (versions SP300-SM,
SP400-SM, SP400-SMI), 70000-A20-H11
(versions SP450-SM, SP450-SMA, SP450-SMA4),
70000-A20-H20 (version SP450-SMA4)
electronic components used in the
suspension
PAGE 23 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
5.2. Tyres (category, dimensions and maximum : Front (versions SP180-S, SP250-S, SP300-S,
loading) and rims (standard type) SP450-S, SP400-S, SP450-SA, SP400-SI, SP450-
SA3)
Category Special Normal
Size 217-10 217-10
Max load 92.5 kg 92.5 kg
Rim 5.510 5.510
Front (versions SP250-U, SP300-U)
Category Special
Size 258-12
Max load 155 kg
Rim 612
Front (versions SP300-SM, SP450-SM, SP400-SM,
SP450-SMA, SP400-SMI, SP450-SMA4)
Category Normal
Size 165/70-10
Max load 97.5 kg
Rim 5.5x10
Rear (versions SP180-S, SP250-S, SP300-S, SP450-
S, SP400-S, SP450-SA, SP400-SI, SP450-SA3)
Category Normal Special Normal
Size 2011-9 2011-9 2011-10
Max load 132 kg 132 kg 128 kg
Rim 89 89 810
Rear (versions SP250-U, SP300-U)
Category Special
Size 2510-12
Max load 190 kg
Rim 812
Rear (versions SP300-SM, SP450-SM, SP400-SM,
SP450-SMA, SP400-SMI, SP450-SMA4)
Category Special
Size 225/40-10
Max load 118 kg
Rim 810
5.2.1. Nominal rolling circumference : Versions SP180-S, SP250-S, SP300-S, SP450-S,
SP400-S, SP450-SA, SP400-SI, SP450-SA3:
Front- 1676 mm, rear- 1596 mm
Versions SP250-U, SP300-U:
Front & rear- 1995 mm
SP450-SMA, SP400-SMI, SP450-SMA4:
Front- 1524 mm, Rear- 1364 mm
5.2.2. Tyre pressures recommended by the : 35 kPa
manufacturer
PAGE 24 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
5.2.3. Tyre/ wheel combinations : Versions SP180-S, SP250-S, SP300-S, SP450-S,

Front- 217-10/ 5.510
Rear- 2011-9/ 89 or 2011-10/ 810
Front- 258-12/ 612
Rear- 2510-12/ 812
Front- 165/70-10/ 5.510
Rear- 225/40-10/ 810
5.2.4. Minimum-speed category symbol : Versions SP180-S, SP250-U, SP300-U,
compatible with the theoretical maximum SP450-S, SP450-SM, SP400-S, SP400-SM, SP450-
design speed of the vehicle SA, SP450-SMA, SP400-SI, SP400-SMI, SP450-
SA3, SP450-SMA4: F
Version SP250-S, SP300-S, SP300-SM: G
5.2.5. Minimum load-capacity index with the : Versions SP180-S, SP250S, SP300-S, SP450-S,
maximum load on each tyre SP400-S, SP400-SM, SP300-SM, SP450-SM,
SP450-SA, SP450-SMA, SP400-SI, SP400-SMI,
SP450-SA3, SP450-SMA4: Front- 20, rear- 34
Front- 18, rear- 38
5.2.6. Categories of use compatible for the vehicle : Versions SP180-S, SP250-S, SP300-S, SP450-S,
Front and rear- normal or special
Front and rear- special
Front- normal, rear- special
6. Steering
6.1. steering gear and control
6.1.1. Type of gear : N.A. (handle bar on the front shaft steering)
electronic components used in the steering
system
7. Braking
7.1. Diagram of braking devices : See drawing no.31115-A03-H00 (variants 180, 250,
300, 400, 400SI), 31115-A12-H01 (variant 450)
7.2. Front and rear brakes, disc and/or drum : Front and rear- disc
7.2.1. Make(s) : Optional system A, B, C: Horng Fuu Industrial Co.,
Ltd.
Optional system D: Yun Chen Tech. Motor Co.,
Ltd.
PAGE 25 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
7.2.2. Type(s) : Option system A (for versions SP180-S, SP250-S,

SP250-U, SP450-S, SP450-SA, SP450-SA3)
Front: 31335-A03-000 (RH), 31336-A03-000 (LH)
Rear: 31360-A03-000
Option system B (for all versions)

Front: 31335-A03-000 (RH), 31336-A03-000 (LH)
Rear: 31360-A03-001 (variants 180, 250, 300, 400,
400SI)
Rear: 31360-A12-000 (variant 450)
Option system C (for all versions)

Front: 31335-A03-000-C (RH), 31336-A03-000-C
(LH)
Rear: 31360-A03-000-C (variants 180, 250, 300,
400, 400SI)
Rear: 31360-A12-000-C (variant 450)
Option system D (for all versions)

Front: 31335-A03-110 (RH), 31336-A03-110 (LH)
Rear: 31360-A03-101 (variants 180, 250, 300, 400,
400SI)
Rear: 31360-A12-100 (variant 450)
7.3. Drawing of parts of the brake system
7.3.1. Shoes and/or pads : N/A
7.3.2. Linings and/or pads : Optional system A
Front and rear: see drawing no: 31337-A03-000~1,
31337-A03-000~2
Optional system B, C, D
Front: see drawing no: 31337-A03-000~1, 31337-
A03-000~2
Rear: see drawing no: 31337-A03-001~1, 31337-
A03-001~2
7.3.3. Brake levers and/or pedals : Brake levers:
LH side: see drawing no: 31405-A03-001, 31405-
A03-101 (n/a for variant 450)
RH side: see drawing no: 31460-A03-010, 31460-
A03-110 (n/a for variant 450), 31460-A03-000,
31460-A03-100-SI (variant 450)
Brake pedal:
see drawing no: 31408-A03-000 (versions SP180-S,
SP250-S, SP300-S, SP300-SM, SP400-S, SP400-
SM, SP400-SI, SP400-SMI), 31408-A12-000
(variant 450), 31408-A06-H00 (versions SP250-U,
SP300-U)
PAGE 26 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
7.3.4. Hydraulic reservoirs : See drawing no: 31405-A03-001, 31405-A03-101,

31460-A03-010, 31460-A03-110 (n/a for variant
450), 31460-A03-000, 31460-A03-100-SI (variant
450), 31406-A03-000, 31406-A03-100 (n/a for
variant 450), 31406-A08-000, 31406-A08-100
(variant 450)
7.4. Other devices: drawing and description : Mechanical parking brake device acting on the rear
brake, see drawing no. 31115-A03-H00, 31470-
A03-000 (variants 180, 250, 300, 400), 31115-A12-
H01, 31405-A12-000 (variant 450)
7.5. Brief description of the electrical and/or : N/A
electronic components used in the braking
system
8. Lighting and light-signaling devices

Versions SP180-S, SP250-S, SP300-S, SP300-SM, SP400-S, SP400-SM, SP400-SI, SP400-SMI:
Quantity/
Trade Mark Type Tell Tale Approval No. Remark
Color
Max.
Driving lamp JUTE JUTE A013 1 / White E9-113R-001307
35.2 lux
Passing lamp JUTE JUTE A013 1 / White N.A. E9-113R-001307 --
Illumination
Front position JUTE JUTE 0003-P 1 / White of E4-50R-000514 --
lamp speedometer
E9-50R-001272
JUTE or JUTE W016-W
or E9-50R-001111
Front direction or JUTE WL001
2 / Amber or E4-50R-001312 --
indicator MLD or SB12-004
or E11-50R-00
BAYARD or BW06
1312
E9-50R-001272
JUTE SAF-MR
JUTE or or E9-50R-001111
or JUTE WL001
Rear direction or E4-50R-001312
or SB12-004 2 / Amber --
indicator MLD or E11-50R-00
or BW06
BAYARD 1312
or JUTE TL006
or E9-016395
JUTE 0002-T
or 0002-T, rear Illumination E4-50R-000513 or
Rear position JUTE combination lamp 1 / Red of E4-50R-0012767 --
Lamp or JUTE T003- speedometer or E9-50R-001153
LED
Illumination
Rear position JUTE JUTE TL006 2 / Red of E9-026395 --
Lamp (optional) speedometer
JUTE 0002-T
or 0002-T, rear E4-50R-000513 or
Stop lamp JUTE combination lamp 1 / Red N.A. E4-50R-0012767 --
or JUTE T003- or E9-50R-001153
LED
PAGE 27 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
Stop lamp JUTE JUTE TL006 2 / Red N.A. E9-026395 --

(optional)
JUTE 0002-T
or 0002-T, rear E4-50R-000513 or
License Plate combination lamp E4-50R-0012767
JUTE 1 / White N.A. --
illuminator or JUTE T003- or E9-50R-001153
LED or E4-50R-001780
or PL004
JUTE 9605 E13*03R00*03R0
JUTE 9605
Rear retro or DBM, K- 2*0279*01 or
or KM-202 2 / Red N.A. --
reflector LITE (opt.) E9-3R-021269
or 9823
or JUTE or E11-023578
Rear fog lamp FUAN FUAN 0089 1 / Red E9-001240 --

Quantity/
Color
Max.
Driving lamp JUTE JUTE A006-A 2 / White E9-112R-001098
56.1 lux
Illumination
Front position JUTE JUTE A006-A 2 / White of E9-7R-021274 --
lamp speedometer
Front direction JUTE JUTE W013 2 / Amber E4-6R-016962 --
indicator
Rear direction JUTE JUTE W013 2 / Amber E4-6R-016962 --
Indicator
Illumination
Rear position JUTE JUTE 0002-T 1 / Red of E4-50R-000513 --
Lamp speedometer
Stop lamp JUTE JUTE 0002-T 1 / Red N.A. E4-50R-000513 --
License Plate JUTE JUTE 0002-T 1 / White N.A. E4-50R-000513 --

illuminator
JUTE 9605 E13*03R00*03R0
Rear retro JUTE 9605
or DBM, K- 2 / Red N.A. 2*0279*01 --
reflector or KM-202
LITE (opt.) E9-3R-021269
Versions SP450-S, SP450-SM, SP450-SA, SP450-SMA, SP450-SA3, SP450-SMA4 :

Quantity/
Color
Max.
Driving lamp JUTE JUTE A013 1 / White E9-113R-001307
35.2 lux
PAGE 28 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
Illumination
Front position JUTE JUTE 0003-P 1 / White of E4-50R-000514 --
lamp speedometer
E9-50R-001111
JUTE or JUTE WL001
Front direction or E4-50R-001312
MLD or or SB12-004 2 / Amber --
indicator or E11-50R-00
BAYARD or BW06
1312
E9-50R-001111
JUTE or JUTE WL001
Rear direction or E4-50R-001312
MLD or or SB12-004 2 / Amber --
indicator or E11-50R-00
BAYARD or BW06
1312
Rear direction
Indicator
(optional for JUTE JUTE TL006 2 / Amber E9-016395 --
SP450-SA3,
SP450-SMA4
only)
0002-T, rear
Illumination
Rear position combination lamp E4-50R-0012767
JUTE 1 / Red of --
Lamp or JUTE T003- or E9-50R-001153
speedometer
LED
Rear position
Lamp (optional Illumination
for SP450-SA3, JUTE JUTE TL006 2 / Red of E9-026395 --
SP450-SMA4 speedometer
only)
0002-T, rear
combination lamp E4-50R-0012767
Stop lamp JUTE 1 / Red N.A. --
or JUTE T003- or E9-50R-001153
LED
Stop lamp
(optional for
SP450-SA3, JUTE JUTE TL006 2 / Red N.A. E9-026395 --
SP450-SMA4
only)
0002-T, rear
License Plate combination lamp E4-50R-0012767
JUTE 1 / White N.A. --
illuminator or JUTE T003- or E9-50R-001153
LED
License Plate
illuminator
(optional for JUTE PL004 1 / White N.A. E4-50R-001780 --
SP450-SA3,
SP450-SMA4
only)
JUTE 9605 E13*03R00*03R0
Rear retro JUTE 9605
or DBM, K- 2 / Red N.A. 2*0279*01 --
reflector or KM-202
LITE (opt.) E9-3R-021269
PAGE 29 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
Rear retro
reflector
(optional for JUTE 9823 2 / Red N.A. E11-023578 --
SP450-SA3,
SP450-SMA4
only)
Rear fog lamp
(optional for
SP450-SA3, FUAN FUAN 0089 1 / Red E9-001240 --
SP450-SMA4
only)
8.2. Diagram showing the location of the : See drawing no: 70000-A03-H21, 70000-A03-H32,
lighting and light-signalling devices 70000-A03-H40, 70000-A03-H50 (versions SP180-
S, SP250-S, SP300-S, SP400-S, SP400-SI), 70000-
70000-A19-H21, 70000-A19-H32, 70000-A19-
SP400-SM, SP400-SMI), 70000-A20-H11
8.3. Hazard warning lamps : Yes
8.4. Additional requirements relating to special : N/A
vehicles
8.5. Brief description of the electrical and/or : N/A
electronic components used in the lighting
system and in the light-signalling system
9. Equipment
9.1. Coupling devices
9.1.1. Type: hook/ring/other : N/A
9.1.2. Photographs and/ or drawing showing the : N/A
position and the construction of the
coupling devices
9.2. Arrangement and identification of controls,
tell-tales and indicators
PAGE 30 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
9.2.1. Photographs and/or drawings of the : See drawing no: 61101-A03-000, 63300-A03-010
arrangement of the symbols, controls, tell- (versions SP250-S, SP250-U, SP300-S, SP300-U,
tales and indicators SP400-S)
63300-A07-000 (version SP180-S)
63300-A12-000 (versions SP450-S, SP450-SA,
SP450-SA3)
63300-P300-000 (versions SP300-SM, SP450-SM,
SP400-SM, SP180-S, SP250-S, SP300-S, SP400-S,
SP450-S, SP450-SA, SP450-SMA, SP450-SA3,
SP450-SMA4)
61101-A26-000, 63300-A26-H00, 63300-A28-H00
(versions SP400-SI, SP400-SMI)
See drawing no: 63300-A03-020 (versions SP250-
S, SP300-S, SP400-S)
63300-A07-010 (version SP180-S)
63300-A12-H10 (version SP450-SA3)
63300-P300-010 (versions SP300-SM, SP400-SM,
SP180-S, SP250-S, SP300-S, SP400-S, SP450-SA3,
SP450-SMA4)
63300-A26-H10, 63300-A28-H10 (versions SP400-
SI, SP400-SMI)
9.3. Statutory inscriptions
9.3.1. Photographs and/or drawings showing the : See drawing no. 71000-A03-H00 (versions SP180-
location of the statutory inscriptions and the S, SP250S, SP300-S, SP300-SM, SP400-S, SP400-
chassis number SM, SP400-SI, SP400-SMI), 71000-A06-H00
(Variant 450)
9.3.2. Photographs and/or drawings showing the : See drawing no: 71237-A07-000 (version SP180-
official part of the inscriptions S), 71237-A03-000 (version SP250-S), 71237-A06-
000 (version SP250-U), 71237-A03-010 (version
SP300-S), 71237-A06-010 (version SP300-U),
71237-A12-000 (version SP450-S), 71237-A19-000
(version SP300-SM), 71237-A20-000 (version
SP450-SM), 71237-A21-000 (version SP400-S),
71237-A22-000 (version SP400-SM), 71237-A12-
010 (version SP450-SA), 71237-A20-010 (version
SP450-SMA), 71237-A26-000 (version SP400-SI) ,
71237-A28-000 (version SP400-SMI), 71237-A12-
020 (version SP450-SA3), 71237-A20-020 (version
SP450-SMA4)
9.3.3. Photographs and/or drawings of the chassis : See drawing no: 71236-A03-H07
number
9.4. Device(s) to protect against unauthorized use
9.4.1. Type of device(s) : Type 1
PAGE 31 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
9.4.2. Summary description of device(s)used : Steering shaft is locked to the frame body by a #
lock pin, see drawing no: 70000-A03-H21, 70000-
A03-H32, 70000-A03-H40, 70000-A03-H50
(versions SP180-S, SP250-S, SP300-S, SP400-S,
SP400-SI), 70000-A06-H20 (versions SP250-U,
SP300-U), 70000-A12-H21 (versions SP450-S,
SP450-SA, SP450-SA3), 70000-A12-H30 (version
SP450-SA3), 70000-A19-H21, 70000-A19-H32,
70000-A19-H40, 70000-A19-H50 (versions
SP300-SM, SP400-SM, SP400-SMI), 70000-A20-
H11 (versions SP450-SM, SP450-SMA, SP450-
9.5. Audible warning device(s)
9.5.1 Summary description of device(s) used and : One electromagnetic DC horn
9.5.2. Make(s) : Knight Horn, as option: CHEN LEN
9.5.3. Type(s) : KMG-80E, as option: CL-2
9.5.4. Type-approval mark : E13-II-000036, as option: II-E4-000014
9.5.5. Drawing(s) showing the location of the : See drawing no: 70000-A03-H21, 70000-A03-H32,
audible warning device(s) in relation to the 70000-A03-H40, 70000-A03-H50 (versions SP180-
structure of the vehicle S, SP250-S, SP300-S, SP400-S, SP400-SI), 70000-
70000-A19-H21, 70000-A19-H32, 70000-A19-
SP400-SM, SP400-SMI), 70000-A20-H11
9.5.6. Details of the method of attachment, : See drawing no: 70000-A03-H21, 70000-A03-H32,
including the part of the vehicle structure to 70000-A03-H40, 70000-A03-H50 (versions SP180-
which the audible warning device(s) is (are) S, SP250-S, SP300-S, SP400-S, SP400-SI), 70000-
attached A06-H20 (versions SP250-U, SP300-U), 70000-
70000-A19-H21, 70000-A19-H32, 70000-A19-
SP400-SM, SP400-SMI), 70000-A20-H11
PAGE 32 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
9.6. Location of rear registration plate : See drawing no: 70000-A03-H21, 70000-A03-H32,
70000-A03-H40, 70000-A03-H50 (versions SP180-
S, SP250-S, SP300-S, SP400-S, SP400-SI), 70000-
70000-A19-H21, 70000-A19-H32, 70000-A19-
SP400-SM, SP400-SMI), 70000-A20-H11
9.6.1. Inclination of plane in relation to the : 29
vertical
B. INFORMATION RELATING SOLELY TO TWO-WHEEL MOPEDS AND

MOTORCYCLES
Not applicable
PAGE 33 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
C. INFORMATION RELATING SOLELY TO THREE-WHEEL MOPEDS, MOTOR

TRICYCLES AND QUADRICYCLES
1. Dimensions and masses
1.1. Dimensions to be complied with when building unbodied chassis
1.1.1 Length : Versions SP180-S, SP250-S, SP300-S, SP450-S,
SP400-S, SP450-SA, SP400-SI, SP450-SA3: 1825
mm
mm
1860 mm
1.1.2. Width : Versions SP180-S, SP250-S, SP300-S, SP300-SM,
SP450-SM, SP400-S, SP400-SM, SP450-SMA,
SP400-SI, SP400-SMI, SP450-SMA4: 1230 mm
Version SP450-S, SP450-SA, SP450-SA3: 1205
mm
1.1.3. Unladen height : Versions SP180-S, SP250-S, SP300-S, SP400-S,
SP400-SI: 1140 mm
Version SP450-S, SP450-SA, SP450-SA3: 1115
mm
mm
1025 mm
1.1.4. Front overhang : Versions SP180-S, SP250-S, SP300-S, SP450-S,
SP400-S, SP450-SA, SP400-SI, SP450-SA3: 255
mm
mm
290 mm
1.1.5. Rear overhang : Versions SP180-S, SP250-S, SP300-S, SP300-SM,
SP450-S, SP450-SM, SP400-S, SP400-SM, SP450-
SMA, SP450-SA, SP400-SI, SP400-SMI, SP450-
SA3, SP450-SMA4: 300 mm
1.1.6. Limit position for centre of gravity of : N/A
bodied vehicle
1.2. Masses
1.2.1. Maximum payload declared by : 75 kg
manufacturer
2. Equipment
PAGE 34 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
2.1. Bodywork
2.1.1. Nature of bodywork : N/A
2.1.2. General dimensional arrangement drawing : N/A
of inside
2.1.3. General dimensional arrangement drawing : N/A
of outside
2.1.4. Materials and methods of manufacture : N/A
2.1.5. Passenger doors, locks and hinges : N/A
2.1.6. Configuration, dimensions, direction and : N/A
maximum opening angle of doors
2.1.7. Drawing of locks and hinges and their : N/A
location in the doors
2.1.8. Technical description of locks and hinges : N/A
2.2. Windscreen and other glazing
2.2.1. Windscreen
2.2.1.1. Materials used : N/A
2.2.2. Other glazing
2.2.2.1. Materials used : N/A
2.3. Windscreen wiper(s) : N/A
2.3.1. Detailed technical description : N/A
2.4. windscreen washer(s) : N/A
2.5. Defrosting and demisting : N/A

2.6. Rear-view mirror(s)
2.6.1. Make : FU
2.6.2. Type-approval mark : L-E11-001094
2.6.3. Variant : N/A
2.6.4. Drawing(s) showing the location of the : See drawing no: 70000-A03-H21, 70000-A03-H32,
rear-view mirror(s) in relation to the 70000-A03-H40, 70000-A03-H50 (versions SP180-
structure of the vehicle S, SP250-S, SP300-S, SP400-S, SP400-SI), 70000-
70000-A19-H21, 70000-A19-H32, 70000-A19-
SP400-SM, SP400-SMI), 70000-A20-H11
PAGE 35 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
2.6.5. Detailed information on the method of : Mirrors are mounted on the handle bar by using
attachment, including that part of the screws
structure of the vehicle to which the rear-
view mirror is attached
2.7. Seats
2.7.1. Number : 2
2.7.2. Location : Center of vehicle
2.7.3. Coordinates or drawing of the R point
2.7.3.1. Driving seat : N/A
2.7.3.2. Other seats : N/A
2.7.4. Intended seat-back inclination : N/A
2.7.5. Seat adjustment range, where appropriate
2.8. Passenger-compartment heating system
2.8.1. Summary description of type of vehicle in : N/A
respect of the heating system if this uses
heat from the liquid engine coolant
2.8.2. Detailed description of the type of the : N/A
vehicle in respect of the heating system if
this uses the cooling air or exhaust gases as
a heat source, including
2.8.2.1. An overall drawing of the heating system : N/A
giving its location on the vehicle
2.8.2.2. An overall drawing of the heat exchanger : N/A
used in systems utilizing the heat from the
exhaust gases, or of the parts where that
exchange takes place
2.8.2.3. A sectional drawing of the heat exchanger : N/A
or parts where heat exchange takes place,
together with a statement of the wall
thickness, of the materials used and the
characteristics of their surface
2.8.2.4. Specifications regarding the method of : N/A
manufacture and technical data relating to
other major components of the heating
system, such as the fan
2.9. Safety belts
2.9.1. Number and location of safety belts, : N/A
together with a reference to the seats where
that type of equipment may be installed
PAGE 36 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
2.10. Anchorages
2.10.1. Number and location of the anchorages : N/A
2.10.2. Photographs and/or drawings of the : N/A
bodywork showing the true, effective
location and dimensions of the anchorages,
together with an indication of the R-point
position
2.10.3. Drawings of the anchorages and the parts of : N/A
the structure of the vehicle to which they
are attached
2.10.4. Designation of the types of belts(*) : N/A
authorized for attachment to the anchorages
on the vehicle
2.10.5. Description of a specific type of belt, one : N/A
anchorage of which is attached to the seat
back-rest or incorporates an energy-
dissipation device
PAGE 37 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
PART 2 SEPARATE DIRECTIVE APPROVAL NUMBERS
The following information shall be supplied on the vehicle to be type approved with regard to existing system,
separate technical unit or component approvals(*):
Heading Separate Directive Subject Approval No (1) Extension Variants

No No date and
versions
covered
18 95/1/EC Maximum torque and -- -- --

maximum net power of
engine
19 97/24/EC (C7) Anti-tampering -- -- --

measures for mopeds
and motorcycles
20 97/24/EC (C6) Fuel tank -- -- --

Maximum design speed
25 95/1/EC -- -- --
of vehicle
26 93/93/EEC Masses and dimensions -- -- --
27 97/24/EC (C10) Trailer coupling -- -- --

devices
28 97/24/EC (C5) Anti-air pollution -- -- --

measures
29 97/24/EC (C1) Tyres -- -- --
31 93/14/EEC Braking system -- -- --

32 2009/67/EC Installation of lighting -- -- --
and light-signalling
devices on the vehicle
33 97/24/EC (C2) Lighting and light- -- -- --
signalling devices
34 93/30/EEC Audible warning -- -- --

device
35 2009/62/EC Position for the -- -- --

mounting of rear
registration plate
PAGE 38 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
Heading Separate Directive Subject Approval No(1) Extension Variants

No No date and
versions
covered
36 97/24/EC (C8) Electromagnetic -- -- --
compatibility
37 97/24/EC (C9) Sound level and -- -- --

exhaust system
38 97/24/EC (C4) Rear-view mirror(s) -- -- --
39 97/24/EC (C3) External projections -- -- --
40 2009/78/EC Stand (except in the -- -- --

case of vehicles having
three or more wheels)
41 93/33/EEC Devices to prevent -- -- --

unauthorized use of the
vehicle
42 97/24/EC (C12) Windows; windscreen -- -- --

wipers; windscreen
washers; and so on
43 2009/79/EC Passenger hand-hold -- -- --

for two-wheel vehicles
44 97/24/EEC Anchorage points for -- -- --

(C11) safety belts and safety
belts
45 2000/7/EC Speedometer -- -- --
46 2009/80/EC Identification of -- -- --
controls, tell-tales and
indicators
47 2009/139/EC Statutory inscriptions -- -- --
(1) Examples are given in Annex V.

(*) Information is not required in respect of systems, separate technical units or components which are to be included
in the examination or testing for the granting of whole vehicle type approval.
Note: The heading numbers are aligned with Annex I (list of requirements).
PAGE 39 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
LIST OF CONTENTS
Item Title Drawing No. Notes

1. Frame 71000-A03-H00
2. Frame 71000-A06-H00
3. Frame 71000-A12-H01
4. Vehicle over view 70000-A03-H21
11. Vehicle over view 70000-A03-H40 #
17. Cylinder 12100-E10-H00
18. Cylinder head 12200-E10-H00
19. Piston 13300-E10-000
20. Piston ring 1st 13310-E10-010~1
21. Piston ring 2nd 13310-E10-010~2
22. Piston ring (oil) 13310-E10-010~3
23. Cylinder 12100-E11-H00
25. Piston 13300-E11-000
26. Piston ring 1st 13310-E11-000~1
27. Piston ring 2nd 13310-E11-000~2
28. Piston ring (oil) 13310-E11-000~3
29. Cylinder 12100-E09-000~1
30. Cylinder 12100-E09-000~2
32. Piston 13300-E09-000
33. Piston ring 1st 13310-E09-000~1
34. Piston ring 2nd 13310-E09-000~2
35. Piston ring oil 13310-E09-000~3
36. Cylinder 12100-E12-H00
37. Cylinder 12100-E12-H10
40. Piston & piston rings 13310-E12-000
41. Piston 13300-E12-100
42. Piston ring 1st 13310-E12-100-1
43. Piston ring 2nd 13310-E12-100-2
PAGE 40 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
44. Piston ring oil 13310-E12-100-3

45. Cylinder 12100-E17-H00
46. Cylinder head 12200-E17-000
47. Piston 13300-E17-000
48. Piston ring 1st 13310-E17-000~1
49. Piston ring 2nd 13310-E17-000~2
50. Piston ring (oil) 13310-E17-000~3
52. Fuel cup comp 12100-A03-H00
55. Carburetor Assy 16100-E10-H00
60. Throttle Body 16100-E19-000
61. CDI 61115-A03-000
62. CDI 61115-A07-000
63. CDI 61115-A12-000
64. CDI 61115-A12-100
65. ECU 61115-A26-000
66. Ignition coil, plug cap 61109-A03-000
71. Intake pipe 16410-E10-010
72. Intake pipe 16410-E09-000
73. Inlet pipe 16410-E12-000
74. Intake pipe 16410-E19-000
75. 2nd air induction valve 12166-A03-000
78. Air filter Assy 17300-E10-000
79. Air filter Assy 17300-E09-000
80. Air filter Assy 17300-E12-000~1
85. Inlet silencer 17320-E10-000
88. Exhaust muffler comp 12160-A03-H00
PAGE 41 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875

93. Exhaust muffler 12160-A26-000
94. Exhaust Pipe 12164-A26-000
95. Valve angle 25100-E10-H00
100. R-crankcase venthole system 11350-E10-H10
101. Recycling crankcase gases system 11350-E09-H10
102. Case venthole system 11350-E12-H10
103. R-crankcase venthole system 11350-E17-H00
104. Catalytic 12165-A01-000
105. Catalytic 12165-A12-000
106. Oil cooler 15120-E09-000
107. Transmission system 22100-E10-H01
112. Transmission system 22100-A19-H01
116. Speedometer 63300-A03-010
117. Speedometer 63300-A07-000
118. Speedometer 63300-A12-H00
119. Speedometer 63300-P300-000
122. Speedometer system 62120-A03-H00
123. Speedometer 63300-A03-020 #
124. Speedometer 63300-A07-010 #
125. Speedometer 63300-A12-H10 #
126. Speedometer 63300-P300-010 #
129. Diagram of braking system 31115-A03-H00
130. Diagram of braking system 31115-A12-H01
131. Inner pad 31337-A03-000~1
132. Inner pad 31337-A03-001~1
133. Outer pad 31337-A03-000~2
134. Outer pad 31337-A03-001~2
135. Brake lever Assy (LH) 31405-A03-001
136. Brake lever Assy (LH) 31405-A03-101
137. Brake lever Assy (RH) 31460-A03-010
PAGE 42 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875

140. Brake lever (RH) 31460-A03-100-SI
141. Brake pedal 31408-A03-000
142. Brake pedal 31408-A06-H00
143. Brake pedal 31408-A12-000
144. Master cylinder 31406-A03-000
148. Mechanical parking brake 31470-A03-000
149. Mechanical parking brake 31405-A12-000
Front brake caliper (RH & LH) 31335/31336-A03-
150.
000
151. Front brake caliper (RH) 31335-A03-110
152. Front brake caliper (LH) 31336-A03-110
153. Front disc 31305-A12-000
154. Rear brake caliper 31360-A03-000
159. Rear disc 31350-A03-000
160. Rear disc 31350-A12-000
161. Telltales, controls and indicators 61101-A03-000
162. Telltales, controls and indicators 61101-A26-000
163. Manufacturers data plate 71237-A07-000
179. VIN code 71236-A03-H07
180. Electrical circuit diagram A26 (SP400SI)
181. Radiator Assembly 15230-A03-H00
182. Injector 16250-E19-000
183. O2 sensor position 63215-A26-H00
PAGE 43 / 44
Tel: 886-5-2377870 Fax: 886-5-2377875
PAGE 44 / 44

Quadricycle Approval Docs PDF

Uploaded by

Copyright:

Available Formats

Quadricycle Approval Docs PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Quadricycle Approval Docs PDF

Uploaded by

Copyright:

Available Formats

Access Motor Co., Ltd.

No. 5, Chung-Hsin Rd., Chia-Tai Industrial Zone, Tai-Pao City,

APPLICATION FOR EXTENSION APPROVAL OF TWO OR THREE-WHEEL MOTOR VEHICLES

1. Trade name or mark of the Device : Access

2. Manufacturers name of the Device : SP250

3. Manufacturers name and address : Access Motor Co., Ltd.

4. If applicable, name and address of : Not applicable

5. Brief description : Quadricycle

6. Submitted for approval on (date) : January 7, 2013

Name: Sean Huang

THIS APPLICATION IS ACCOMPANIED WITH:

In respect to Article 7 in Directive 2002/24/EC, we, ACCESS MOTOR

Name Position in Company Signature

Sean Huang General Manager

Kevin Chen Section Chief

Eeric Lin Team Leader

Hao-Chien Fang Engineer

0.1. Make: Access

Chia-Yi, Taiwan, R.O.C.

32. Tyre size designation:

EC type-approval number : e4*2002/24*1151*10

Reason for extension : - modification of maximum speed for versions

Approval mark : e4*2002/24*1151

0.1. Make(s) (trade name of the : Access

0.2. Type : SP250

WVTA 2002.24-2006.96 v5.01 Page 1 of 5

0.2.1. Commercial name(s) : Access Motor, as option: SS250R, Hammel,

0.3. Means of identification of type, if : ???SP????????????

0.3.1. Location of that marking : On the right side of frame body

0.4. Category (2) : L7e

0.5.1. Name(s) and address(es) of assembly : Access Motor Co., Ltd.

The approval is granted/refused/withdrawn (1).

Attachments: Information document, Parts 1 and 2 (Annex II).

WVTA 2002.24-2006.96 v5.01 Page 2 of 5

(Article 5(1), first subparagraph)

1. Results of the sound level tests.

2. Results of the exhaust emission tests.

WVTA 2002.24-2006.96 v5.01 Page 3 of 5

NOx (g/km) (1) 0.257 0.181 0.205 0.178 0.261 0.113

CO (% vol) at normal 0.693 0.693 0.924 0.924 -- --

WVTA 2002.24-2006.96 v5.01 Page 4 of 5

Specify the idle speed 1600 1600 1800 1800 -- --

CO (% vol) at high 0.640 0.640 0.077 0.077 -- --

WVTA 2002.24-2006.96 v5.01 Page 5 of 5

According to Council Directive on the approximation of

EC-system type approval : e4*2002/24*1151*09

Structure of report: 0. General information

TV Rheinland Kraftfahrt GmbH Technologiezentrum Verkehrssicherheit 77-1532e12.rdw Page 1 of 17

0.1. Trade mark or trade name of : Access

0.2. Manufacturers name for the : SP250

0.3. Name and address of the : Access Motor Co., Ltd.

0.4. Name and address of the : Not applicable

0.5. No. of information document : SP250-2002/24-10

TV Rheinland Kraftfahrt GmbH Technologiezentrum Verkehrssicherheit 77-1532e12.rdw Page 2 of 17

1. Test object(s) and general test information

1.1. Test object(s)

1.1.1 Identification no. : RK3SP12129A000631,

Version(s) : SP450-SA3, SP450-SMA4

Sort / category : Quadricycle / L7e

EC type-approval number : e42002/241151*10

Approval mark : e42002/241151

EC-system type approval : e42002/241151*09