Tessitura Monti Final
Tessitura Monti Final
Tessitura Monti Final
Prepared for the Mumbai University in the partial fulfillment of the requirement for the
award of the degree in
MASTERS OF MANAGEMENT STUDIES
Submitted By:
Name: Kalpesh Anand Paradkar
Roll No. 58
Year: 2015-17
SFIMAR
DECLARATION
I, Kalpesh Anand Paradkar here-by declare that the project report on mechanism of export
finance through internship for the fulfillment of the requirement of my course from St.
Francis Institute of Management & Research is an original work of mine and the data
provided in the study is authentic, to the best of my knowledge.
This study has not been submitted to any other Institution or University for award of any
other degree.
However, I accept the sole responsibility of any possible error or omission.
COMPANY CERTIFICATE
Company Logo/
Address
Date:
TO WHOMSOEVER IT MAY CONCERN
This is to certify that Kalpesh Anand Paradkar has successfully completed his/her Summer
project on Mechanism of Export Finance for a period of __________ months. i.e. from
______ to ______ 2016.
During this period, we found him/her sincere, honest & hardworking.
Signing Authority
Name
Designation
Department
ACKNOWLEDGEMENT
Any task that is under taken reaches successful completion not only by an Individuals effort
but also by the guidance and support of many others. Here are we to acknowledge a few of
those who have helped us to carry out this project work successfully.
I express my deep to Mr. Shrikrishna Kelkar, Director and Mr. Harshad Tengshe,
Accounts manager, for giving me this opportunity to undertake this project in this prestigious
organization and providing a good environment to my work.
I would also like to thank my project Guide Dr. Smita Jesudasan and entire staff for the
invaluable help and support they extended during the project work.
I would like to express my special gratitude and thanks to my institute, St Francis Institute of
Management & Research.
My sincere thanks and appreciation to all the people who were involved in the project
completion and collection of data which helped in developing the project and who have
willingly contributed with their time, talents and abilities.
EXECUTIVE SUMMARY
FINANCE IS THE LIFE AND BLOOD OF ANY BUSINESS. Success or failure of any
export order mainly depends upon the finance available to execute the order. Nowadays
export finance is gaining great significance in the field of international finance.
Many Nationalized as well as Private Banks are taking measures to help the exporter by
providing them pre-shipment and post- shipment finance at subsidized rate of interest. Some
of the major financial institutions are EXIM Bank, RBI, and other financial institutions and
banks. EXIM India is the major bank in the field of export and import of India. It has
introduced various schemes like forfeiting, FREPEC Scheme,etc.
Even Government is taking measures to help the exporters to execute their export orders
without any hassles. Government has introduced schemes like Duty Entitlement Pass Book
Scheme, Duty free Materials, setting up of Export Promotion Zones and Export Oriented
Units, and other scheme promoting export and import in India. Initially the Indian exporter
had to face many hurdles for executing an export order, but over the period these hurdles
have been removed by the government to smoothen the procedure of export and import in
India.
CONTENTS:
Sr.No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Contents
Introduction to the company profile
Introduction to the department
Project Introduction
Need for the study
Objectives of the study
Literature review
Research Methodology
Data collection and analysis
Page Number
8
14
16
17
18
19
23
25
25
1.2.Graphical representation
Findings and Interpretations
Implementation
2.1. SOP- Workshop As Promoter
2.2. Tele script for calling
2.3. FAQs for WAP
2.4. Branding
Recommendations
Limitations
Future scope.
Conclusion
Bibliography
Appendix
30
36
37
37
38
41
44
45
46
47
48
49
50
Over a century has passed since Gruppo Tessile Monti set up in Italy in 1911. Through the
decades, Monti has grown into an institution of fine design and craftsmanship, weaving Giza
cotton into intricate yarn-dyed cotton shorting fabrics that have changed fashion and
influenced the worlds leading brands.
Tessitura Monti India Pvt. Ltd. (TMIPL), installed a facility in India at the pleasant town of
Kolhapur, Maharashtra. With a complete hold on the trends in local production as well as in
global markets, a goal was set to provide premium yarn-dyed fabrics to cover the demand for
fine shirting fabric.
In the beginning, the unit started as EOU & the production facilities were primarily for
weaving. In time 200 looms were set up. The facility is well equipped with modern processes
for dyeing yarn, warping, sizing, and weaving. With over 900 employees the facility covers
an area of 20,000 square meters.
With processing machines installed, the management took a strategic step of entering into the
domestic market by supplying goods to the organized premium Apparel brands & the Over
the counter retail (OTC) market through distributor channels.
As of now approximately 60.0 million USD has been invested into this unit so far. The Unit
operates in complete sync with Italy Unit by delivering the same quality standards with the
advantage of a price benefit to the buyers on bulk purchases.
The employees in the unit are trained by their Italian counterparts and hence the legacy and
expertise of a hundred years is well reflected at every step of production.
The quality of fabric in poplin, twill, oxford, stripes, checks and all yarn-dyed products starts
with the selection of the best quality Egyptian Giza yarn followed by using high quality dye
agents.
This is subjected to a modern and progressive manufacturing process and very stringent
quality control, where finally every meter of fabric woven is thoroughly inspected.
It is this unwavering quality that has influenced customer expectation, putting us ahead of
competitors.
TMIPL understands the importance of impeccable service and hence provide the best service
when compared to competitors. This necessitates optimum logistical control of material flow
through the plant and a very careful and precise scheduling in the preparation and weaving
departments, which is being managed centrally by headquarters in Italy. Through the
dynamic management of the company, modern manufacturing equipment, finely tuned
logistics and a very well trained and motivated group of employees, TMIPL has the capability
to face the ever-increasing challenges of the international market in the future.
Report will help company to list down all procedures of export trade. Various documents
required in the report will help company to make a detailed analysis of documents prepared
by various departments for SAP implementation.
To study various available financing options for company by using appropriate Risk
Arbitrage tools .
Various types of Incentives available and the procedure for applying for the same
Textile and Apparel sector is a major sector globally. Since the initial stages of global
industrialization, Textile and Apparel sector has remained at the forefront in generating
employment and adding significantly to manufacturing output and exports for
countries. Textile & Apparel industry can be attributed as the first organized industry
when it grew out of the industrial revolution in the 18th Century. Countries like Britain,
Italy, France, Japan, etc. had a thriving Textile & Apparel industry during their initial
phase of growth, which supported their economic growth. The same is true today for
nations like Bangladesh, Vietnam and Cambodia.
Since the output of Textile & Apparel industry is a basic requirement for sustenance, the
long term growth trend of industry had always been positive. However, production
bases have kept shifting all along. Increase in manufacturing costs in developed
countries, which were the main markets also, caused growth of Textile & Apparel sector
in Asian countries which had raw material advantage as well. Soon enough the
manufacturing base spread to smaller nations, particularly those which got preferential
access to major markets of USA, Europe and Japan.
10
The current global garment market is approximately US$ 1.15 trillion which forms
nearly 1.8% of the world GDP. Almost 75% of this market is concentrated in EU27,
USA, China and Japan
The world garment market is growing at a CAGR of 5% and attaining a size of about
US$ 2.21 trillion by 2025
An analysis of per capita spend on garment in various countries shows a significant
difference between numbers in developed and developing economies. Within the major
markets, India has the lowest per capita spend on garment (US$ 37) which is only 3% of
the highest one viz. Australia (US$ 1,131).
11
Indias textiles sector is one of the oldest industries in Indian economy dating back several
centuries. Even today, textiles sector is one of the largest contributors to Indias exports with
approximately 11 per cent of total exports. The textiles industry is also labour intensive and is
one of the largest employers. The industry realised export earnings worth US$ 41.4 billion in
2014-15, a growth of 5.4 per cent, as per The Cotton Textiles Export Promotion Council
(Texprocil). The textile industry has two broad segments. First, the unorganised sector
consists of handloom, handicrafts and sericulture, which are operated on a small scale and
through traditional tools and methods. The second is the organised sector consisting of
spinning, apparel and garments segment which apply modern machinery and techniques such
as economies of scale.
The Indian textiles industry is extremely varied, with the hand-spun and handwoven textiles
sectors at one end of the spectrum, while the capital intensive sophisticated mills sector at the
other end of the spectrum. The decentralised power looms/ hosiery and knitting sector form
the largest component of the textiles sector. The close linkage of the textile industry to
agriculture (for raw materials such as cotton) and the ancient culture and traditions of the
country in terms of textiles make the Indian textiles sector unique in comparison to the
industries of other countries. The Indian textile industry has the capacity to produce a wide
variety of products suitable to different market segments, both within India and across the
world.
Market Size
The Indian textiles industry, currently estimated at around US$ 108 billion, is expected to
reach US$ 223 billion by 2021. The industry is the second largest employer after agriculture,
providing employment to over 45 million people directly and 60 million people indirectly.
The Indian Textile Industry contributes approximately 5 per cent to Indias gross domestic
product (GDP), and 14 per cent to overall Index of Industrial Production (IIP).
The Indian textile industry has the potential to reach US$ 500 billion in size according to a
study by Wazir Advisors and PCI Xylenes & Polyester. The growth implies domestic sales to
rise to US$ 315 billion from currently US$ 68 billion. At the same time, exports are implied
to increase to US$ 185 billion from approximately US$ 41 billion currently.
Investments
The textiles sector has witnessed a spurt in investment during the last five years. The industry
(including dyed and printed) attracted Foreign Direct Investment (FDI) worth US$ 1.77
billion during April 2000 to September 2015.
Some of the major investments in the Indian textiles industry are as follows:
Reliance Industries Ltd (RIL) plans to enter into a joint venture (JV) with China-based
Shandong Ruyi Science and Technology Group Co. The JV will leverage RIL's existing
textile business and distribution network in India and Ruyi's state-of-the-art technology and
its global reach.
12
Giving Indian sarees a green touch, Dupont has joined hands with RIL and Vipul Sarees for
use of its renewable fibre product Sorona to make an environment-friendly version of this
ethnic ladies wear.
Grasim Industries has invested Rs 100 crore (US$ 15 million) to develop its first fabric brand,
Liva', which it will distribute through 1,000 outlets as part of a plan to stay in sync with
changing consumer behaviour.
Snapdeal has partnered with India Post to jointly work on bringing thousands of weavers and
artisans from Varanasi through its website. This is an endeavour by Snapdeal and India Post
to empower local artisans, small and medium entrepreneurs to sustain their livelihood by
providing a platform to popularise their indigenous products, said Mr Kunal Bahl, CEO and
Co-Founder, Snapdeal.
Welspun India Ltd (WIL), part of the Welspun Group has unveiled its new spinning facility at
Anjar, Gujarat - the largest under one roof in India. The expansion project reflects the ethos
of the Government of Gujarats recent Farm-Factory-Fabric-Fashion-Foreign Textile Policy,
which is aimed at strengthening the entire textile value-chain.
American casual fashion retailer Aropostale, Inc. has inked a licensing agreement with
Arvind Lifestyle Brands Ltd to open standalone stores in the country. Aropostale will open
30 stores and 25 shop-in-shop locations over the next three years.
Government Initiatives
The Indian government has come up with a number of export promotion policies for the
textiles sector. It has also allowed 100 per cent FDI in the Indian textiles sector under the
automatic route.
Some of initiatives taken by the government to further promote the industry are as under:
The Government of India has started promotion of its India Handloom initiative on social
media like Facebook, Twitter and Instagram with a view to connect with customers,
especially youth, in order to promote high quality handloom products.
The Ministry of Textiles launched Technology Mission on Technical Textiles (TMTT) with
two mini-missions for a period of five years (from 2010-11 to 2011-12 in the 11th five year
plan and 2012-13 to 2014-15 in 12th five year plan) with a total fund outlay of Rs 200 crore
(US$ 30 million). The objective of TMTT is to promote technical textiles by helping to
develop world class testing facilities at eight Centres of Excellence across India, promoting
indigenous development of prototypes, providing support for domestic and export market
development and encouraging contract research.
The Government of India is expected to soon announce a new National Textiles Policy. The
new policy aims at creating 35 million new jobs by way of increased investments by foreign
companies, as per Textiles Secretary Mr S K Panda.
13
14
Average cotton yarn spinning cost at US$ 2.5 per kg, which is lower
countries including China
Low wages: Rate at 0.51 US$ per operator hour as compared to USD
and USD 2.5 of Turkey
1 of China
Weaknesses:
Structural weaknesses in weaving and processing
-
15
Opportunities
Quota phase out pushing the export growth
Buoyant domestic economy
- Increasing disposable income levels.
- Increasing working female population: The propensity to spend in the case of working
women is higher by 1.3 times as compared to a house wife.
Increased usage of credit cards and availability of cheap finance would also provide fillip to
impulsive apparel purchases.
The revolution in organized retailing would increase the consumption of apparel and madeups.
Threats
Possibility of a global recession triggered by a weakening dollar.
Higher competition especially after 2008 when China cannot be restrained under WTO.
Non-availability of indigenous textile machinery.
Lack of domestic capital and absence of appetite of domestic industries to invest in the
quantities envisaged for 12 percent growth target.
16
International trade is the exchange of goods and services between countries. This
type of trade gives rise to a world economy, in which prices, or supply and demand, affect
and are affected by global events. Political change in Asia, for example, could result in an
increase in the cost of labor, thereby increasing the manufacturing costs for an American
sneaker company based in Malaysia, which would then result in an increase in the price that
you have to pay to buy the tennis shoes at your local mall. A decrease in the cost of labor, on
the other hand, would result in you having to pay less for your new shoes.
Trading globally gives consumers and countries the opportunity to be exposed to
goods and services not available in their own countries. Almost every kind of product can be
found on the international market: food, clothes, spare parts, oil, jewelry, wine, stocks,
currencies and water. Services are also traded: tourism, banking, consulting and
transportation. A product that is sold to the global market is an export, and a product that is
bought from the global market is an import. Imports and exports are accounted for in a
country's current account in the balance of payments.
Trade is what keeps economies and nations alive. Trade demands create domestic
production and the inflows of funds from overseas. Countries that have limited domestic
resources, such as Singapore, must be able to keep up with domestic production of various
goods and services so as to maintain a trade surplus, as they cannot produce everything they
need in within their own borders.
Exporting is increasing yearly, globally. This is due to various factors. First, both large and
small firms export not just large firms. Also, under the World Trade Organization (WTO)
there has been a decline in trade barriers. This holds true for other regional trade agreements
such as the European Union (EU) and North American Free Trade Agreement (NAFTA).
17
EXPORT FINANCE
CONCEPT
Institutional Framework
Institutional framework for providing finance comprises Reserve Bank of lndia, Commercia1
Banks, Export Import Bank of India and Export Credit and Guarantee Corporation. Reserve
Bank of India, being the central bank of country, lays down the policy frame work and provides guidelines for implementation. Finance short or medium term, is provided exclusively
by the Indian and foreign commercial banks which are members of the Foreign Exchange
Dealers Association. The Reserve Bank of India function as refinancing institutions for short
and medium term loans respectively, Provided by commercial banks. Export Import Bank of
India, in certain cases, participates with commercial bank in extending medium term loans to
exporters. Commercial banks provide finance at a concessional rate of interest and in turn are
refinanced by the Reserve Bank! Export Import Bank of India at concessional rate. In case
they do not wish to avail refinance, they are entitled for an interest rate subsidy. Export Credit
& Guarantee Corporation (ECGC) also plays an important role through its various policies
and guarantees providing cover for commercial and political risks involved in export trade.
18
EXPORT PROCEDURE
Once the contract has been won, the export department (which handles the documentation)
takes over with preparation of all the documents necessary to be prepared at each stage of the
transaction.
(i) Pre-shipment
(ii) Shipment
(iii) Post-shipment
Pre-Shipment process
Quotation & Order Confirmation
The organization, upon inquiry from a prospective buyer issues a quotation mentioning its
terms and conditions related to shipping of goods, payments, price and quality of goods. It
also provides value & volume of goods, terms for letter of credit, as per the case and other
details related to trade like date and time period for shipment, destination port, and final
destination. The quotation here maybe of two types
Firm quotation
i)
ii)
A quotation including the clause without engagement gives the seller more
latitude and does not bind him into the contract upon simple acceptance from the
19
seller. In other words the seller can still choose to ignore the quotation if he so
desires, even after the buyer has agreed to it. A further confirmation is required
from the seller to bring the contract into existence. The importer on accepting the
terms & conditions, sends a Purchase order (PO).
Once the customer has sent the purchase order, it is usually followed up by an order
confirmation from the seller (irrespective of whether it is a firm or without engagement
quotation). While the order confirmation from the seller is not necessary in case of a firm
quotation, it is sent merely to ensure clarity between the parties. This must also be
accompanied by a pro-forma invoice, which is prepared by the exporter and is an indication
of what the real invoice will look like after delivery. The importance of this document should
not be overlooked as it forms the basis for the preparation of all the documents required at
various stages of the transaction. It is issued against the export order and is basically an
acceptance and reconfirmation of the terms of contract. Providing a detailed and
unambiguous pro-forma invoice is essential, since it provides a base for establishing Letter of
Credit (L/C) or receiving remittance from the importer as the case may be. (Letter of credit
and an advance payment are two modes of pre-shipment payment and will be dealt with in
detail later). The opening of a letter of credit (hereinafter referred to as L/C) is made easier
with a pro-forma invoice since it establishes in advance the various terms and conditions,
how the buyer and seller intend to divide the risks arising out of the export contract, how
payment will be made and other specifications. Thus it allows the bankers to make an
accurate assessment of the essentials of the contract and open the L/C on behalf of the
importer.
Given below are the various details/terms/clauses that must be mentioned while preparing the
pro-forma invoice. The terms in these clauses which require explanation are described in the
following pages and also with appropriate endnotes.
20
Apart from these mandatory details that are required to be included in the pro-forma
invoice, other details that must be disclosed vary according to the terms and mode of
payment.
In case the mode of payment is Letter of Credit the following additional details/terms must be
mentioned:
On receipt of packing list from the factory pre-shipment documents are prepared under
appropriate scheme, i.e. DEPB / Duty Drawback / Advance Authorization (in case where the
21
raw materials used in the export product are imported) as the case may be; duly quoting the
EPCG License no. towards fulfillment of average or export obligation undertaken against
import of Capital Goods (Plant and Machinery) and forward to clearing agent and factory for
processing.
Get the documents processed at Customs / Port by clearing agent and to be kept ready
to receive the goods at port / container freight station for carting
Shipment of Goods:
Once the pre-shipment procedures are complete shipment of goods becomes the next
stage in the export process. For carrying out the procedures related to shipment of goods,
selection of a freight forwarding agent is very important.
Freight Forwarder: An international freight forwarder is an agent for the exporter in moving
the export goods to an overseas destination. Freight forwarders assist exporters in preparing
price quotations by advising on freight costs, port charges, consular fees, costs of special
documentation, insurance costs, and their handling fees. Once the order is ready for shipment,
freight forwarders should review all documents to ensure that everything is in order.
The cost of the shipment, the delivery schedule, and the accessibility to the shipped product
by the foreign buyer are all factors to consider when determining the method of international
shipping.
Broad categories of export shipments are:
Under claim of Drawback of duty
Without claim of Drawback
Export by a 100% Export Oriented Unit
Under Duty Entitlement Pass Book (DEPB) Scheme
Largely, the following procedure may be followed for shipment of goods:
Submit documents to Freight Forwarder, instructing him to book space on the steamer/
airline. The Exporter is expected to provide the following documents to the Clearing &
Forwarding Agents, who are entrusted with the task of shipping the consignments, either by
air or by sea.
Invoice
Packing List
Declaration in FORM SDFviii (to meet the requirements as per FEMA) in duplicate.
22
Buyer Set
Bill Of Exchange
Commercial Invoice
Insurance Certificate
Certificate of Origin
23
Courier receipt
Shipment Advice
Bank Set
Covering Letter
Invoice
Packing List
Bill of lading
Freight Certificate
If the export is against an LC then the bank documents to be sent is mentioned in L/C
(Document to be couriered to be Bank Address). The negotiating bank will scrutinize these
documents and if found in order, negotiate the same. If the export is DA/DP then one set of
documents is sent to bank in which payment from that particular buyer is going to be received
and one to buyer directly for release of goods from port.
The issuing bank makes the payment to the negotiating bank if there is no discrepancy in the
terms and conditions as mentioned in L/C. If there is any discrepancy then the issuing bank
asks for a NOC or a discrepancy waiver approval from the importer and after it is given then
only the payment is released to the negotiating bank.
Then the beneficiarys bank gets the payment from issuing bank and on receiving the
payment it issues a Bank realization Certificate (BRC). This document confirms the export
realization and is used for getting the incentives hence it is send to the DGFT for the DEPB
scheme. A copy of BRC is sent to RBI directly by the negotiating bank.
Commercial Invoice
A bill for the goods from the seller to the buyer. These invoices are often used by
governments to determine the true value of goods when assessing customs duties.
Governments that use the commercial invoice to control imports will often specify its form,
content, number of copies, language to be used, and other characteristics. A commercial
24
invoice is a prima-facie evidence of the contract of sale and purchase. It is a document made
by the exporter on the importer indicating details like description of the goods consigned,
consignors name, consignees name, name of the steamer, number and date of bill of lading,
country of origin of goods, price, terms of payment, amount of freight etc.
Following are the conditions that must be exercised in order to ensure that an invoice is
considered valid:
The invoice should be made out in the name of the applicant or the party specified in LC
To be signed by an authorized signatory of the exporter.
The invoice should be drawn in the same currency of LC unless otherwise specified also
mentioning the terms of delivery & routing of merchandize.
The invoice should not include any charges not stipulated in the LC. Also, the gross value of
invoice should not exceed credit value.
The invoice should show deduction towards advance payment made, agency commission
payable etc. as applicable.
Final amount of invoice or the percentage of drawing as permitted in the LC should
correspond with the draft amount.
If partial shipments are affected, amount of drawings should preferably correspond to
proportionate quantities shipped.
If invoices issued for an amount in excess of the amount permitted by the credit, the drawing
should not exceed the amount of credit. Details stated on the invoice should correspond
exactly to details specified in all other documents. Also, the details should certify the facts
like origin of goods etc, stipulated in the LC
Consular Invoice
Mainly needed for the countries like Kenya, Uganda, Tanzania, Mauritius, New Zealand,
Burma, Iraq, Ausatralia, Fiji, Cyprus, Nigeria, Ghana, Zanzibar etc. It is prepared in the
prescribed format and is signed/ certified by the counsel of the importing country located in
the country of export.
Customs Invoice
25
Mainly needed for the countries like USA, Canada, etc. It is prepared on a special form being
presented by the Customs authorities of the importing country. It facilitates entry of goods in
the importing country at preferential tariff rate.
Legalized Invoice
This shows the seller's genuineness before the appropriate consulate/ chamber of commerce/
embassy. It do not have any prescribed form.
It also states other details like name of exporter, consignee, port of loading, discharge
& destination.
Bill of lading
A document that establishes the terms of a contract between a shipper and a transportation
company under which freight is to be moved between specified points for a specified charge.
Usually prepared by the shipper on forms issued by the carrier, it serves as a document of
title, a contract of carriage, and a receipt for goods. Also see Air waybill, Inland bill of lading,
Ocean bill of lading
Bill of lading is closely related to the LC. It is a very important document when it comes to
LC mode of payment. Each & every LC has the provision of presentation of Bill of Lading
before payment is discharged on it. The possession of the original bill of lading enables the
26
holder to claim the goods from the carrier. It is the only negotiable document. It is generally
issued in three originals and all the three are sent to the buyer as a post shipment document.
FCR/LR/Airways Bill:
All the three documents are issued for the same purpose but for different means. Freight
cargo receipt is issued when the goods are exported through sea route, Lorry receipt is issued
in the case when goods are exported by road and Airways Bill is issued when goods are
exported via airways. In absence of BL these documents act as a proof for export of goods.
These documents are issued in lieu of BL, which is issued and sent to the buyer with the
shipment itself by the shipping company
Shipping Bill:
This document is issued by the customs and is certificate of custom clearance. A copy of
shipping bill is sent to the sellers bank as a post shipment document. It contains all the
details about the goods like:Bears a distinct number known as SB number.
28
Bill of Exchange
The bill of exchange, commonly referred to as the draft or the bill, is an unconditional order
in writing, signed and addressed by the drawer (the exporter usually) to the drawee (the
confirming bank or the issuing bank usually), requiring the drawee to pay the drawer a certain
sum of money at sight or at a fixed or determinable future time.
The draft is widely used in international trade, most frequently in the payment against a
letter of credit (L/C). It is also used in the open account without any L/C involved.
Drawer
The drawer is the party who issues the draft and to whom the payment is made. The drawer is
the seller (the exporter) and the payee of the draft. The payee could be another party rather
than the exporter, or could be the bona fide holder (the bearer) of the draft.
Drawee
The drawee is the party who owes the money or agrees to make the payment and to whom the
draft is addressed (made out). The drawee is the buyer (the importer), the acceptor and the
payer of the draft in a documentary collection. In a letter of credit the drawee most often is
the confirming bank or the issuing bank, which is the acceptor and the payer of the draft.
Remitting Bank
The exporter's bank to whom the exporter sends the draft, shipping documents and
documentary collection instructions, and who subsequently relays them to the collecting bank
in a documentary collection is called the remitting bank.
The term remitting bank as used under a letter of credit may refer to a nominated bank from
whom the issuing bank or the confirming bank, if any, receives the shipping documents.
29
Certificates of Origin
The certificate of origin is a document certifying the country in which the product was
manufactured, and in certain cases may include such information as the local material and
labour contents of the product.
Some importing countries require a certificate of origin to establish whether or not a
preferential duty rate is applicable. A popular example of the certificate of origin is the Form
A, which is often called the GSP Form A.
The certificate of origin (C/O) is an alternative to the declaration or the certification and/or
legalization of the commercial invoice. The C/O is based on the rules of the country of origin.
The country of origin is the country where the goods are grown, produced or manufactured.
The manufactured goods must have been substantially transformed in the exporting country
as the country of origin, to their present form ready for export. Certain operations such as
packaging, splitting and sorting may not be considered as sufficient operations to confer
origin.
The certificate of origin includes the Form A, Chamber of Commerce Certificate of Origin,
Exporter's Certificate of Origin, and Free Trade Market Certificate of Origin. The trade
agreement, import practice, and letter of credit (L/C) stipulation determine the type of C/O
needed.
30
invoice and packing list, adding a declaration that the goods in question are manufactured in
the exporting country, and that the amount shown on invoice is the true and correct value.
Depending on the L/C stipulation, the certificate of origin issued by the exporter may be
self-certified and/or require certification by a Chamber of Commerce or the government
foreign trade office. The certification normally requires payment of a fee, unless selfcertified.
Shipping Advice
The shipping advice is a notice to the importer on summary of the shipment.
Foreign importer may arrange the cargo insurance on time based on the shipping advice (if
buyer is to arrange the insurance). Moreover, importer may know when to receive the goods
and arrange with a customs broker for the cargo clearance.
The shipping advice is particularly important in short-sea trades, for example within the
Asian countries where the goods may arrive at the port of destination before the shipping
documents, and in the ports of destination where theft and pilferage of the imported goods is
rampant.
Beneficiary's Certificate
The beneficiary's certificate, sometimes referred to as the certificate of assurance, is a
certification issued by the beneficiary of the letter of credit (L/C) showing, unless wording is
specified in the L/C, the summary of a consignment and declaring (i.e., assuring the
consignee) that the shipment in question conforms to the specifications in the sales contract.
The exporter can issue a beneficiary's certificate using company letterhead.
Health Certificate
Phytosanitary or Plant Health Certificate
The prefix 'phyto' means plant. The phytosanitary certificate---plant health certificate---is
issued by the government agricultural department or certified inspector for such agricultural
products as seeds, fruits, vegetables, rice, wheat, soybean, corn, and milled materials (e.g.
flour and soybean meal), certifying that the goods are free from harmful pests and diseases.
Fumigation Certificate
31
The fumigation certificate is issued by a specialized treatment plant or firm for agricultural
and forestry products, certifying that the goods have been treated with smoke or fumes. The
purpose of fumigation is to kill insects or disinfect. For example, wood may be fumigated
with methyl bromide.
In some countries, a fumigation certificate may be required to obtain a phytosanitary
certificate for the forestry products.
Analysis Certificate
The analysis certificate is required by certain importing countries and/or importers for tariff
or other purposes, usually issued as proof of product composition or contents. It is obtained
from an independent testing laboratory. Importers may specify a testing laboratory in the
letter of credit (L/C).
Insurance certificate
Used to assure the consignee that insurance will cover the loss of or damage to the cargo
during transit. These can be obtained from freight forwarder or with direct insurance
company.
32
Methods/Terms of Payment
There are 4 primary methods of payment in international trade.
i)
Cash in Advance
ii)
Letters of Credit
iii)
Documentary Collections
iv)
Open Account
1) Cash in Advance
The cash-in-advance method of payment is the safest for exporters since the payment is made
before the goods are shipped and credit risk (risk of non-payment) is mitigated. It also
involves the least paperwork and payment is made quick and in a secure manner. In todays
scenario, an adapted version of this method is often used, wherein a part payment (40-70%) is
made in advance and the remainder of the payment is made upon receipt of goods. This
method is also expensive for the importer since the fee for an international wire transfer is
paid by the sender (importer)ix. This is a common form of this method used in Alok Industries
as well.
33
2) Letter Of Credit
The buyer and the seller who are located in different countries, may not know each other and
hence many times the problem of Buyers creditworthiness hampers the trade between the
buyer and the seller. The main objectives of the buyer and the seller in any international trade
and contradictory in terms of Buyer will always try to delay the payment while the seller
would like to receive funds at the earliest.
To mitigate this problem, Seller always request Buyer to arrange for a Letter of Credit to be
issued by Buyers Bank. Upon issuance of Letter of Credit, the Buyers bank replaces its own
Creditworthiness to that of the Buyer, it undertakes to reimburse the Seller for the value of
the Letter of Credit Irrevocably provided two underline conditions are fulfilled by the
Seller:
All the documents stated in the LC are presented;
All the terms and conditions of the LC are complied with.
34
The LC can also be the source of payment for a transaction, meaning that redeeming the letter
of credit will pay an exporter. Letters of credit are used primarily in international trade
transactions of significant value, for deals between a supplier in one country and a customer
in another. The parties to a letter of credit are usually a beneficiary who is to receive the
money, the issuing bank of whom the applicant is a client, and the advising bank of whom
the beneficiary is a client. Almost all letters of credit are irrevocable, i.e., cannot be amended
or canceled without prior agreement of the beneficiary, the issuing bank and the confirming
bank, if any.
Some of the Documents Called for under a LC
35
have a remedy for an action upon the contract of sale, and that it would be a calamity for the
business world if, for every breach of contract between the seller and buyer, a bank were
required to investigate said breach.
The principle of strict compliance also aims to make the banks duty of effecting payment
against documents easy, efficient and quick. Hence, if the documents tendered under the
credit deviate from the language of the credit the bank is entitled to withhold payment even if
the deviation is purely terminological.
The price of LCs
All the charges for issuance of Letter of Credit, negotiation of documents, reimbursements
and other charges like courier are to the account of applicant or as per the terms and
conditions of the Letter of credit. If the LC is silent on charges, then they are to the account of
the Applicant. The description of charges and who would be bearing them would be indicated
in the field 71B in the Letter of Credit.
1. The Applicant is the party that arranges for the letter of credit to be issued.
2. The Beneficiary is the party named in the letter of credit in whose favor the letter of credit
is issued.
3. The Issuing or Opening Bank is the applicants bank that issues or opens the letter of credit
in favor of the beneficiary and substitutes its creditworthiness for that of the applicant.
4. An Advising Bank may be named in the letter of credit to advise the beneficiary that the
letter of credit was issued. The role of the Advising Bank is limited to establish apparent
authenticity of the credit, which it advises.
5. The Paying Bank is the bank nominated in the letter of credit that makes payment to the
beneficiary, after determining that documents conform, and upon receipt of funds from the
issuing bank or another intermediary bank nominated by the issuing bank.
36
6. The Confirming Bank is the bank, which, under instruction from the issuing bank,
substitutes its creditworthiness for that of the issuing bank. It ultimately assumes the issuing
banks commitment to pay.
37
Simultaneously, the Negotiating Bank forwards the documents to the Issuing Bank to be
released to the Applicant to claim the goods from the carrier.
Applicant reimburses the Issuing Bank for the amount, which it had paid to the Negotiating
Bank.
Issuing Bank releases all documents along with the titled Transport Documents to the
Applicant.
38
1) Irrevocable
An irrevocable letter of credit can neither be amended nor cancelled without the agreement of
all parties to the credit. Under UCP500 all letters of credit are deemed to be irrevocable
unless otherwise stated. Here, the importer's bank gives a binding undertaking to the supplier
provided all the terms and conditions of the credit are fulfilled.
2) Unconfirmed
The advising bank forwards an unconfirmed letter of credit directly to the exporter without
adding its own undertaking to make payment or accept responsibility for payment at a future
date, but confirming its authenticity.
39
3) Confirmed
A confirmed letter of credit is one in which the advising bank, on the instructions of the
issuing bank, has added a confirmation that payment will be made as long as compliant
documents are presented. This commitment holds even if the issuing bank or the buyer fails
to make payment. The added security to the exporter of confirmation needs to be considered
in the context of the standing of the issuing bank and the current political and economic state
of the importer's country. A bank will make an additional charge for confirming a letter of
credit. In many cases, the confirming bank is located in Beneficiarys country.
Confirmation costs will vary according to the country involved, but for many countries
considered a high risk will be between 2%-8%. There also may be countries issuing letters of
credit, which banks do not wish to confirm - they may already have enough exposure in that
market or not wish to expose themselves to that particular risk at all.
40
41
The Beneficiary is exposed to the Commercial risk on Issuing Bank, Political risk on the
Issuing Banks country and Foreign Exchange Risk in case of Usance Letter of Credits Letter
of Credit Process:
42
3) Open Account:
Open Account is the term used to indicate that the payment will be made by the importer after
the goods have been received by him. As is evident this is clearly the riskiest option for the
exporter but with increasing competition exporters are being pressed into granting open
account terms in an effort to capture greater market share. However despite the benefits of
greater market share, exporters must thoroughly consider the political and economic stability
of the importing country and be convinced that they have accurately assessed and taken all
the risks into account.
In this case, apart from the goods being shipped, all the required documents of title to the
goods are also sent to the importer to enable him to claim the goods and clear them through
customs. The exporter has only the importers word that the payment will be made in full at a
stipulated future date, which usually ranges between 1-3 months from the date of shipment. It
is advisable to use the open account terms in combination with various export finance
techniques such as export credit insurance and factoring so as to mitigate the risks associated
with this method.
Since such liberal terms are based largely on mutual trust between the exporter and importer,
it is essential that the exporter is confident about the buyers credit rating and has accurately
determined the reliability of the importer. Open Account terms should be used only while
dealing with politically and economically stable markets backed by well established trade
relations between the two parties.
In recent times there has been a shift in the international trading community, with traders
moving away from the well established L/C to more liberal open account structures
especially for short-term contracts. This is the result of globalization which fosters an
intensely competitive trading environment. In Asia, the stringent credit control measures
adopted by the countrys policy makers (central banks) have also led to a reduced potential to
lend to importers, thus bringing about a decline in the use of the L/C instrument.
43
EXPORT INCENTIVES
44
Manufacturers or processors who are unable to avail any of these schemes can avail duty
drawback. Here, the excise duty, customs duty and service tax paid on inputs is refunded to
the exporter of finished product by way of duty drawback
Payment of drawback
The payment of drawback is made under the rules and interest, by the Custom/Central
Excise Collectorate having Jurisdiction over the port /airport / land customs station
through which exports are affected to the exporter or to the agent specially authorised by
the exporter to receive the said amount of drawback and interest. The payment of
drawback and interest is made by credit in the exporter's account maintained with the
respective Custom House
45
EXPORT FINANCE
In the previous sections we have studied export finance from the point of view of the various
modes of payment that the exporter has at his disposal. This section focuses on export finance
from the point of view of the credit facilities extended to the exporters at pre and post
shipment stages. It deals with credit extended to the exporter for financing the purchase,
manufacture and packing of goods intended for overseas markets. The objective is to educate
the reader about pre and post shipment credit.
PRE-SHIPMENT FINANCE
Pre-shipment finance is provided to the exporters for the purchase of raw materials,
processing them and converting them into finished goods for the purpose of export.
46
Eligibility: Packing credit is available to all exporters whether merchant exporter, Export/
Trading/ Star Trading/ Super Star Trading Houses and manufacturer exporter. Manufacturers
of goods supplying to Export/ Trading/ ST/ SST Houses and Merchant exporters are eligible
for packing credit. The-foreign buyer through the medium of a reputed bank gives the credit
to eligible exporters, for specified purposes against irrevocable letter of credit. It is also
available against a confirmed or firm export order/contract placed by the buyer for export of
goods from India.
2) Running Account Facility:
The RBI has permitted banks to grant packing credit advances even without lodgment of-L/ C
or firm-order/ contract under the scheme of Running Ac-count Facility subject to, the
fol1owing.conditions
i) The bank may extend this facility only to those exporters whose track record has been
good.
ii) L/C or firm order is produced within a reasonable period of time. For Commodities under
selective credit control, banks should insist on production of LCs or firm orders within one
month from the date of sanction.
iii) The concessive credit available in respect of individual pre-shipment credit should not go
beyond 180 days. Packing credit may also be given under the Red Clause letter of credit. In
this method, credit is given at the instance and responsibility of the foreign bank establishing
the LC. Here, the packing credit advance is made against a simple receipt and is unsecured.
Amount: - The loan amount is decided on the basis of export order and the credit rating of the
exporter by the bank. Generally the amount of packing credit will not exceed FOB value of
the export goods or their domestic value whichever is less. It can be to the extent of domestic
value of the goods even
though such value is higher than their FOB value provided the goods are entitled to duty draw
back and also covered by the Export Production Finance Guarantee of the ECGC.
Period: - The packing credit can be granted for a maximum period of 180 days from the date
of disbursement. The banks are authorised by RBI to extend this period. This period can be
47
extended for a further period of 90 days, in case of nonshipment of goods within 180 days.
The extension can be done provided the banks are satisfied that the reasons for extension are
due to circumstances beyond the control of the exporters. Pre-shipment credit may be given
for a longer period upto a maximum of270 days, if the banks are satisfied about the need for
longer duration of credit.
Rate of Interest:-The interest payable on pre-shipment finance is usually lower than the
normal rate, provided the credit is extinguished by lodging the export bills on remittances
from abroad. If the exporter fails to do so they would not be able to avail concessional rate of
interest. In order to avail the packing credit; exporters are expected to make a formal
application to the bank giving details of credit requirements along with the required
documents.
48
accordingly after the shipment of goods the bills will be eligible for discounting/
rediscounting or for post-shipment credit in foreign currency. The exporters can avail this
finance under the following two options.
i) The exporters may avail pre-shipment credit in rupees and, then, the post-shipment credit
either in rupees or in foreign currency denominated credit or discounting/ rediscounting of
export bills.
ii) The exporters may avail pre-shipment credit in foreign currency and discounting/
rediscounting of the export bills in foreign currency.
PCFC credit will also be available both to the supplier units of EPZ/ EOU and the receiver
units of EPZ/ EOU. The credit in foreign currency shall also be available on exports to Asian
Clearing Union (ACU) Countries. This will be extended only !l the basis of confirmed! firm
export orders or confirmed L/Cs. The Running Account facility will not be available under
the scheme.
POST-SHIPMENT FINANCE
It may be defined as any loan or advance granted or any other credit provided
by a bank to an exporter of goods from India from the date of extending the credit after
shipment of goods to the date of realization ion of export proceeds. It includes any loan or
advance granted to an exporter on consideration of or on the security of, any duty drawback
or any cash receiv ables by way of incentive from the government.
While granting post-shipment finance, banks are governed by the guidelines issued by the
RBI, the rules of the Foreign Exchange Dealers Association of India (FEDAI), the Trade
Control and Exchange Control Regulations and the International Conventions and Codes of
the International Chambers of Commerce. The exporters are required to obtain credit limits
suitable to their needs. The quantum of credit depends on export sales and receivables. Post
shipment finance is granted under various methods. The exporter may choose the type of
facility as per his requirement. The Banks scrutinize the documents submitted for compliance
of exchange control provisions like:
i) The documents are drawn in permitted currencies and payment receivable as permitted
method of payment;
49
ii) The relevant GR/PP form duly certified by the customs is submitted and particulars as
stated in the GR/PP form
to the overseas importers against acceptance of the draft to make payment on maturity. Since
the financing banks are open to the risk of non-payment, ECGC policies issued in favor of
exporters and assigned to banks are insisted upon.
Under the policy, ECGC fixes limits and payment terms for individual buyers and the
financing bank has to ensure that the limit is not exceeded so that the benefits of policy are
avail-able. Banks also secure a guarantee from ECGC on the post shipment finance extended
by them either on a selective or whole turnover basis. Banks sometimes do obtain credit
reports on foreign buyers before they purchase the export bills drawn on the foreign buyer.
FORFEITING
Forfeiting is another method of medium term financing (1-5 yrs) which is open to the
exporter should he require it. It involves the purchase of receivables (bills drawn on the
importer) from the exporter such as acceptance drafts drawn under L/C, bills of exchange,
promissory notes and other negotiable instruments. These are usually purchased sans
recourse i.e. without recourse to the exporter. This means that the exporter will not be held
liable in case of non-payment by the importer. These receivables are bills drawn by the
exporter upon the importer containing an unconditional guarantee (generally issued by the
importers bank) to pay. The banks in turn can deal with these bills in two ways. They can
either hold them until maturity and follow up with the importer or sell these bills to other
investors (again sans recourse).
A term commonly interchanged with forfaiting, is factoring. However it must be
remembered that factoring involves the financing smaller claims such as for consumer goods
and is usually provided for periods ranging from 90-180 days. Forfaiting on the other hand is
used to finance capital goods exports ranging from 3-5 yrs. Factoring effectively takes care of
51
commercial risk while forfaiting covers political risk also since the applicant gets cash in
hand without recourse.
FACTORING
Factoring is similar to forfeiting in that it also allows the exporter to raise finance against his
outstanding export bills and involves the purchase of the exporters receivables. The
difference is that it factoring houses provide credit for a term ranging between 90-180 days
and is therefore a sound and flexible source of financing working capital finance compared to
loans. Factoring is a suitable option when export bills are of large amounts, collection of
debts is uniform and distributed fairly evenly over the financial year. Unlike forfaiting which
is always without recourse, in order to avail non-recourse factoring, credit limits must be
agreed on for each customer.
Factoring houses prefer the debtors to be varied and are usually averse to provide factoring
services in cases where one debtor accounts for a majority of the organizations sales.
Factoring houses may typically take control of the exporters sales ledger. Thus as and when
a sale is made, the invoice is and the export bill is sent to the factor, who arranges the finance
of a sizeable proportion (80-85%) of the value of the export bill. The factor then follows up
with the importer and collects payments on the exporters behalf. The remainder of the bill
value (15-20%), less service charges will be received once the factor collects payment from
the importer.
The advantage that factoring provides over the more traditional methods of overdrafts is that
while an overdraft hypothecated against export bills can arrange for only around 50-60% of
52
the value of the bill, factoring can extend up to 85%, thereby maximizing cash flow.
Factoring is considered to be a costly source of financing compared to other short term
finance options but factoring and forfaiting are extremely advantageous to the exporter
especially while attempting to venture into new markets where he is under pressure from
competitors to offer liberal payment terms such as open account.
FCNR
Foreign Currency Non-Resident account is a form of term deposit option available to Non
Resident Indians who wish to operate a bank account in India. These can be opened in four
currencies, Dollar, Euro, Pound and Japanese Yen. What makes it the preferred option for
most NRIs is that under this scheme, repayments are made in the same foreign currency in
which they were opened, thus protecting the account holder from fluctuations in exchange
rates.
Out of funds mobilized through this scheme, banks can lend money to corporates in foreign
currencies (available under this scheme). This is advantageous since the rates at which loans
are extended through the FCNR route are linked to LIBOR and are low cost compared to
traditional rupee credit. Thus corporates can convert their rupee liabilities into foreign
currency liabilities at low cost. Moreover the regulations are relaxed compared to ECBs
which makes it attractive for corporates who are looking for a low cost alternative to meet
their working capital requirements. Amounts for which credit is extended is generally greater
than USD 100,000.
However, as with any means of financing this is also not without some degree of risk. It goes
without saying that where two currencies are involved the risk posed through fluctuating
exchange rates is always present. On a smaller level, there is also the risk of the LIBOR being
set higher than domestic rates. Of the two the exchange rate risk is the one that corporates
53
must watch out for. However, they can quite easily hedge this risk with a forward contract
which will be explained in the next section.
The following illustration will help understand how the FCNR route works out more costfriendly:
ILLUSTRATION 1:
Domestic rupee credit = 13.5%
On the other hand a 6 month LIBOR loan would work out to
54
55
i
ii
iii
iv
v
vi
vii
viii
ix