Asme Y14.34-2013 Toc
Asme Y14.34-2013 Toc
Asme Y14.34-2013 Toc
34-2013
(Revision of ASME Y14.34-2008)
Associated Lists
Engineering Drawing and Related
Documentation Practices
A N A M E R I C A N N AT I O N A L STA N DA R D
ASME Y14.34
ADOPTION NOTICE
ASME Y14.34, Associated Lists, was adopted on 1 August 2008 for use by the Department of Defense, (DoD).
Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, U.S. Army
ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, NJ 07806-5000. Copies of this document may be purchased from
The American Society of Mechanical Engineers (ASME), 22 Law Drive, P.O. Box 2900, Fairfield, NJ 07007-2900;
http://www.asme.org.
Custodians:
Army AR
Navy SA
Air Force 16
Adopting Activity:
Army AR
(Project DRPR-2014-001)
Review Activities:
Army AV, CR, PT, TE, TM
Navy AS, CG, CH, EC, MC, SA
Air Force 04, 11, 13, 16, 99
DLA DH
OSD SE
NSA NS
Other MP, DC2
NOTE: The activities listed above were interested in this document as of the date
of this document. Since organizations and responsibilities can change, you
should verify the currency of the information above using the ASSIST Online
database at https://assist.dla.mil.
ASMC N/A
DISTRIBUTION STATEMENT A. Approved for public release, distribution is unlimited.
AREA DRPR
ASME Y14.34-2013
(Revision of ASME Y14.34-2008)
Associated Lists
Engineering Drawing and Related
Documentation Practices
A N A M E R I C A N N AT I O N A L S TA N D A R D
This Standard will be revised when the Society approves the issuance of a new edition.
Periodically certain actions of the ASME Y14 Committee may be published as Cases. Cases are
published on the ASME Web site under the Y14 Committee Page at go.asme.org/Y14committee as
they are issued.
Errata to codes and standards may be posted on the ASME Web site under the Committee Pages to
provide corrections to incorrectly published items, or to correct typographical or grammatical errors
in codes and standards. Such errata shall be used on the date posted.
The Y14 Committee Page can be found at go.asme.org/Y14committee. There is an option available
to automatically receive an e-mail notification when errata are posted to a particular code or standard.
This option can be found on the appropriate Committee Page after selecting Errata in the Publication
Information section.
Copyright 2014 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All rights reserved
Printed in U.S.A.
CONTENTS
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Committee Roster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correspondence With the Y14 Committee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv
v
vi
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures
3-1
Application List Manually Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2
Application List Digitally Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3
Data List Manually Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4
Separate Data List Digitally Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-5
Index List Manually Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-6
Separate Index List Digitally Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-7
Separate Parts List Manually Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-8
Separate Parts List Digitally Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-9
Wire List Manually Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-10 Wire List Digitally Generated Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1
Separate List Heading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-1
Integral Parts List Graphic Sheet of Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-2
Integral Parts List Separate Sheet of Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-3
Parts List Column Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-1
Application List Column Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-1
Data List Column Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-1
Index List Column Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-1
Wire List Column Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
24
25
26
iii