Readme

QXDM Version 3.09.
19
03/06/2006
This readme covers important information concerning QXDM Version 3.09.19
Table of Contents
1. Installation notes
2. What's new in this release
3. Known issues
---------------------------------------------------------------------1. INSTALLATION NOTES
QXDM is built to run on Windows 2000, and Windows XP operating systems.
Support is not provided for Windows NT and Windows 9X variants.
QXDM Software Requirements:
Internet Explorer version 5.0 or newer
Windows 2000 SP1 or newer operating system
QPST Server 2.7.90 or newer
---------------------------------------------------------------------2. WHAT'S NEW
This Release (Version 3.09.19) 03/06/2006
Product Release: Includes updates since last product release (03.09.16).
1)
Database Updates:
Add the following DIAG entities (logs):
0x1061 - "Obsolete - 1xEV-DO Data Rate Control Channel - ARQ Buffer"
0x1065 - "1xEV-DO Debug Hex Dump"
0x1067 - "Obsolete - 1xEV-DO Forward Traffic Rate Slot Count"
0x106A - "1xEV-DO Forward Link Packet Snapshot"
0x106B - "Obsolete - 1xEV-DO Session Attempt"
0x1073 - "1xEV-DO High Resolution Temporal Analyzer"
0x1075 - "1xEV-DO Reverse Link Packet Snapshot"
Prior Release (Version 3.09.18) 03/06/2006

1)
2)
3)
4)
5)
6)
7)
8)
Fix broken CDMA OTA hint tracking from EVENT_P_REV_IN_USE_CHANGE

event
Implement enhanced format specifier support to enable full/summary
text generation from scripts
Update main frame title when a new file store is created and used
Add support for fixed length strings whose size is given by another
field
Add new display "GSM Dedicated Mode WCDMA Cell List"
Update Call Manager CDMA Call Origination logic to allow only
appropriate service options and call type based on selection
Add names for CDMA 1x-EV Broadcast Protocol OTA messages
Database Updates:
Update the following DIAG entities (logs) to use fixed length strings
Based on the contents of another field:
0x1165 "QTV RTSP Describe Request"
0x1166 "QTV RTSP Setup Request"
0x1167 "QTV RTSP Play Request"
0x1168 "QTV RTSP Pause Request"
0x1169 "QTV RTSP Teardown Request"
0x116A "QTV RTSP Server Response"

0x116E "SDP File"
0x116F "QTV RTSP Client Response"
0x11C1 "QTV Command Logging"
Add the following DIAG entities (logs):
0x1000 - "Obsolete - Temporal Analyzer"
0x1001 - "Obsolete - AGC Power Control"
0x1003 - "Obsolete - Reverse Link Frame Types"
0x100B - "Obsolete - Finger"
0x100C - "Obsolete - Searcher"
0x100D - "Internal - ETAK"
0x100F - "Obsolete - Searcher, Version 2"
0x1010 - "Obsolete - Handset Status"
0x1014 - "Internal - GPS Info"
0x101A - "General Temporal Analyzer With Supplemental Channels"
0x101B - "Analog Forward Channel"
0x101C - "Analog Reverse Channel"
0x1002 - "Obsolete - Forward Link Frame Types"
0x102F - "Obsolete - Active Set and Channel Configuration"
0x1033 - "Internal - Pilot Phase Measurement Results"
0x1034 - "Internal - Pilot Phase Measurement Database"
0x1035 - "Internal - Pilot Phase Measurement Search Results"
0x1039 - "Internal - GPS Search Results"
0x103B - "Internal - GPS Multipeaks Information"
0x103C - "Internal - GPS Post Processed Search Results"
0x104A - "Bluetooth Baseband (L2CAP only) Received"
0x104B - "Bluetooth Baseband (L2CAP only) Transmitted"
0x104E - "Bluetooth L2CAP Data Received"
0x104F - "Bluetooth L2CAP Data Transmitted"
0x1054 - "Bluetooth RFCOMM Data Received"
0x1055 - "Bluetooth RFCOMM Data Transmitted"
0x10BE - "BCCH Frame Information"
0x10BF - "FCCCH Frame Information
0x10C0 - "FDCH Frame Information"
0x10C1 - "RDCH Frame Information"
0x10C9 - "Internal - RDA Frame Information V1"
0x10D9 - "RDA Frame Information V2"
0x1198 - "MPEG4 Clip Statistics Version 3"
0x11B7 - "QTV Pseudo Streaming 2 Get Request"
0x11B8 - "QTV Pseudo Streaming 2 Get Response Header"
0x11BA - "QTV CMX Audio Input Data"
0x11BB - "QTV RTSP Options"
0x11BC - "QTV RTSP Get Parameter"
0x11BD - "QTV RTSP Set Parameter"
0x11BE - "QTV Video Bitstream"
0x11BF - "QTV ARM Video Decode Statistics"
0x4134 - "WCDMA DL AM Data PDU"
0x4135 - "WCDMA DL AM Signaling PDU"
0x413B - "WCDMA UL AM Data PDU"
0x413C - "WCDMA UL AM Signaling PDU"
0x4143 - "Obsolete - WCDMA RLC UL AM PDU"
0x4144 - "Obsolete - WCDMA RLC DL AM PDU"
0x4145 - "WCDMA RLC UL AM Control PDU"
0x4146 - "WCDMA RLC DL AM Control PDU"
0x414B - "Obsolete - WCDMA RLC UL AM PDU V2"
0x525A - "GSM Dedicated Mode WCDMA Cell List"
Update the following DIAG entities (events) to utilize
more appropriate string types:
1167 "EVENT_WLAN_CP"
1168 "EVENT_ARP"
Add Event:
1205 GPS PD Fallback Mode
Update enum entries for event (directed by technology)
1056 MFLO OIS State

Add Subsystem commands[MFLO]:
[43,53] MFLO/Set Reacquisition Outer Loop Config Request/Response
Add Message SSID's and Levels:
40 Flute
41 Camera
6038 MDP General
Add NV item 4122
Modify definition for following NV items (requested by DIAG team)
1028 gsm_850_pa_temp_comp_index_14
1029 gsm_1900_pa_temp_comp_index_15
1)
2)
3)
4)
5)
6)
7)
Upgrade to ISF version 3 file format. This is nearly identical to V2 except

the addition of an index table to the end of the file that allows for
faster initial loading of files
Fix menu resource leak occuring each time a view is created.
Do not decode CDMA 1x-EV-DO MAC OTA logs as if they contain the standard
CDMA 1x-EV-DO header when generating summary text
Correctly support 'header only' HDR OTA logs
Correctly decode WCDMA RRC OTA message from the FACH channel
Add in UMTS NAS OTA key name support for protocol ID 6 (GSM RR Management)
Database updates:
Add Log name:
0x1352 GPS Processed Peak
Correct Log definition:
0x1351 Clock Transaction And Status
Add Subsystem Requests/Responses:
[43/49] MFLO/Set Test Mode Service Key Request/Response
[43/52] MFLO/Set SW Watch Dog Reset Request/Response
Add NV Items: 4119 to 4121

1)
2)
3)
4)
5)
6)
7)
8)
9)
Add parsing support for following logs and move to OTA log section:
0x412F WCDMA RRC Signaling Messages
0x713A UMTS NAS Signaling Messages
Important: The above are no longer available as log items and instead need
to be registered for as OTA log items
Major performance increase (on the order of 50% - 250%) when processing
existing ISFs
Add "HDR Rev. A Reverse Link T2P Statistics" display
Modify "NV Browser" display:
Add Offline/Reset buttons
Correctly handle dynamic NV items
Minor modifications to HDR Rev. A displays:
HDR Rev. A DRC-DSC-ARQ Buffer Metrics
HDR Rev. A Forward Link Packet Header Info
HDR Rev. A Reverse Link Packet Status
Update license agreement
Add QXDM application name and version to title of license dialog
User guide updates:
Update documentation for WCDMA OTA messages
Update views list
Update various screen shots
SILK Updates
a) Upgrade to SILK version 8.48

b) Update SILK Server DLL to parse 0x713A
10) Database updates:
Correct/add MSM revisions:
0x100800E1 MSM7500 Rev 1.1
0x200800E1 MSM7500 Rev 2.x
Add Events:
949 QTV Silence Insertion Started
950 QTV Silence Insertion Ended
Add enum entry for Event:
1057 MFLO RXD State
[43,50] MFLO/Get MFAFC Status Request/Response
[43,51] MFLO/Set MFAFC Testmode Request/Response
Add Message levels:
[30,10] Media Forward Link Only/MLC Manager
[30,12] Media Forward Link Only/Stream
[30,13] Media Forward Link Only/Transport Layer
[30,14] Media Forward Link Only/DMTT
[30,15] Media Forward Link Only/Log
[30,16] Media Forward Link Only/CAS Layer
[30,17] Media Forward Link Only/AFC
Correct NV Item definition:
3634 ddtm_settings
1)
2)
3)
Add MediaFLO displays:

FLO Data Channel Stats
FLO Data Rate
FLO Packet Error Rate
FLO RSSI
Add OTA support to 'Dynamic Item View' display
Database updates:
Add Logs:
0x10CB Internal - Extended AGC
0x10CC Internal - Transmit AGC
0x10CD Internal - I/Q Offset Registers
0x10CE Internal - DACC I/Q Accum Registers
0x10D0 System Arbitration Module
0x1161 Search Triage Info Version 2
0x1174 1X Searcher 4 Parameters
0x1177 1xEv DO Searcher 4 Parameters
0x1178 AFLT Searcher 4 Parameters
0x121B MFLO FMS Message Data
Modify log name:
0x1263 Sleep Application Statistics
Add Events:
1061 MFLO OSCAR Frame Decoded
1062 MFLO Channel Switch Rendered
[16/0] Handset/Display Get Parameters Request/Response
[16/1] Handset/Display Capture Request/Response
[16/2] Handset/Display Capture Delayed Request/Response
Correct Subsystem Request/Response definition:
[30/0] CDMA 1x Call Processing/Dynamic Feature Verify Request
[30/0] CDMA 1x Call Processing/Dynamic Feature Verify Response
[30/1] CDMA 1x Call Processing/Dynamic Feature Query Response
Add NV Items 4104-4118
3634 ddtm_settings

1)
2)
3)
4)
5)
6)
Add 'HDR Rev. A Reverse Link Metrics' display

Add 'HDR DIP Switches' display
Database Editor updates:
Enable support for Windows XP Themes
DLF/ISF converters do a better job of setting process exit code
(-1 = serious error, 0 = success, > 0 = number of item conversion errors)
SILK updates:
Compile SILK DLL under Visual Studio 2003 (instead of VC6)
Rename SILKServerVC6.dll to SILKServer.dll
Remove SILK packing support since IS-801 is now supported by DM Database
Correct bad HDR message IDs
Update to SILK version 8.47
Move following logs to OTA log section:
0x1085 1xEV-DO Access Channel MAC Capsule
0x1086 1xEV-DO Control Channel MAC Packets
0x1090 Forward Dedicated Control Channel
0x1091 Reverse Dedicated Control Channel
Important: The above are no longer available as log items and instead need
to be registered for as OTA log items
Database updates:
Add Logs:
0x121A Internal - MFLO Control Channel Data
0x1335 Global IPv4 Statistics
0x1337 Global ICMPv4 Statistics
0x1339 Global TCP Statistics
0x133A Global UDP Statistics
Add Events:
1059 MFLO CAS State
1060 MFLO ACQ State
1204 PSMM Sent
Add/Modify enums for Events:
329 HDR MSG RX
330 HDR RXMSG Ignored State
331 HDR RXMSG Ignored SEQ
332 HDR TXMSG ACKED
333 HDR TXMSG Dropped
2053 HDR CMD
2054 HDR CMD Ignored State
2055 HDR IND
[43/35] MFLO/Set SW DMTT Mode Request/Response
[43/38] MFLO/Set SW DMTT Params Request/Response
Correct definition for Subsystem Response:
[5/9] CDMA 1xEV/DIP Switch Response
Add NV items 3945-4103

1)
Add HDR
"HDR
"HDR
"HDR
"HDR
"HDR
"HDR
"HDR
"HDR
Rev.
Rev.
Rev.
Rev.
Rev.
Rev.
Rev.
Rev.
Rev.
A
A
A
A
A
A
A
A
A
graph displays:
DRC-DSC-ARQ Buffer Metrics"
Equalizer Metrics"
Forward Link Packet Header Info"
Forward Link User Packet Throughput"
RAB Info"
Reverse Link Gain Ratios"
Reverse Link Packet Info"
Reverse Link Packet Status"
2)
3)
4)
5)
"HDR Rev. A Reverse Link Throughput"

Create "HDR Information" display from section of "HDR Forward Statistics"
Add totals and averages to:
"HDR Rev. A Multi-User Packet Forward Statistics"
"HDR Rev. A Single-User Forward Statistics Summary"
Modify axis range for "HDR Air Link Summary" display
Database updates:
Add Logs:
0x11C1 QTV Command Logging
0x1218 MFLO Profile Data
0x1219 MFLO Stream PLP Statistics
Add Events:
1058 MFLO HIPRI State Change
1200 Camcorder Start Record
1201 Camcorder Start Transcode
1202 Camcorder Frame Drop
1203 Camcorder Audio Dubbing

1)
2)
3)
4)
5)
6)
Add HDR RevA support to 'HDR Air Link Summary' and 'HDR Power' displays
No longer require user to un-install when legacy installation is found
Correctly extract log equipment IDs for logs with equipment ID > 7
Replace VoIP display with 'VoIP QDJ' and 'VoIP QDTX' displays
Update 'WCDMA RLC AM Channel Stats' display to reflect 0x4138 log changes
Change FLO Status view to update different Flow ID columns if MLC ID and
System information are the same
7) Fix overly restrictive range checking in the following legacy commands:
GPS_Sess_Ctrl
Peek
Poke
8) Add context menu to parsed item list portion of scrolling displays to
allow one to select and copy lines to the clipboard
9) Remove GSFN mismatches from UI portion of 'WCDMA HSDPA Decoding Statistics'
display (per AST request)
Add Log Names:
[Common -> Data PS Statistics]:
0x1339 Global TCP Statistics
0x133A Global UCP Statistics
Add Logs (DIAG Entities):
0x11C2 QTV Audio Frame PTS Information
0x11C3 QTV Video Frame Decode Information
0x127D 1xEV-DO Rev. A RL Gains
0x127F 1xEV-DO Rev. A RMAC3 T2P Resource
0x1280 1xEV-DO Rev. A RMAC3 Packet Information
0x1281 1xEV-DO Rev. A RAB Update Information
0x1282 1xEV-DO DRC ARQ DSC Buffer
0x1284 1xEV-DO Forward Link Packet Header Information
0x1286 1xEV-DO Rev. A Reverse Link Packet Status
0x12E8 Transceiver Resource Manager
0x1350 VcTcxo Manager Automatic Frequency Control
0x1351 Clock Transaction And Status
0x413A WCDMA Radio Bearer Rates
0x525D GSM G2W Searcher Step 1

0x525E GSM G2W Searcher Step 2
0x525F GSM G2W Searcher Step 3
0x5260 GSM G2W Searcher List
Add events:
[MFLO]:
1051 MFLO Stream State
1052 MFLO Control Channel State Change
1053 MFLO Sleep State Change
1054 MFLO Network State Change
1055 MFLO Trans State
1056 MFLO OIS State
1057 MFLO RXD State
[Multimedia -> QVS]:
1191 QVS Register Start
1192 QVS Register Done
1193 QVS Register Failed
1194 QVS Call Setup Start
1195 QVS Call Setup Done
1196 QVS Call Setup Failed
1197 QVS Call Release Start
1198 QVS Call Release Done
1199 QVS Call Release Failed
Correct Log definitions:
0x1068 1xEV-DO Air Link Summary
0x1208 Internal - MFLO DC Correction Dynamic Params
0x4138 WCDMA RLC UL AM Statistics, Version 2
0x420E Internal - WCDMA HS Amplitude And Energy Estimation
Correct Diag Entity 0x1FFD Tool Version (bad offset)
Add Subsystem Request/Response[MFLO]:
[43,48] MFLO/Activate FTAP Flow Request
[43,48] MFLO/Activate FTAP Flow Response
[36,0] Power Management/Set Voltage Regulator Request
[36,0] Power Management/Set Voltage Regulator Response
Add new Message levels:
[Media Forward Link Only]:
[30,7] Media Forward Link Only/Hardware Trace
[30,8] Media Forward Link Only/RX Driver Message
[30,9] Media Forward Link Only/PT Message
[30,11] Media Forward Link Only/Sleep Message
[30,21] Media Forward Link Only/MF Log Message
Add new Equipment ID (10) for DTV (OFDM)
1)
2)
3)
4)
5)
Temporary ISFs are now correctly deleted when saving items through
automation
Add 'VoIP Parameters' display
Add support for NV Item 3757, dqos_supported, to 'HDR SCP Custom Config'
display
getGpsOneFiles.exe updates:
Add files:
fetch_almanac.pl
parseYUMA.pl
AlmUploadProcedures.doc
Database updates:
Remove unused fields, structs, enums, descriptions, nv features and format
specifiers from the QXDM Database.
Add Log names:
0x127B 1xEV-DO Reserved
0x127D 1xEV-DO Rev A RL Gains
0x127F 1xEV-DO Rev A RMAC3 T2P Resource

0x1280 1xEV-DO Rev A RMAC3 Packet Information
0x1281 1xEV-DO Rev A RAB Update Information
0x1282 1xEV-DO DRC ARQ DSC Buffer
0x1284 1xEV-DO Forward Link Packet Header Information
0x521A: "GPRS Ready Timer Status v2"
Add Logs:
0x132F QDJ Enqueue
0x1330 QDJ Dequeue
0x1331 QDJ Update
0x1332 QDTX Encoder
0x1333 QDTX Decoder
0x4205 Obsolete - WCDMA HS Decode Status
0x4206 WCDMA HS Decode Status With Data
Add Subsystem Request/Responses:
[43/26] MFLO/Set AGC Gain Level Response
[43/36] MFLO/Set Number Of Reacquisition Attempts Request
[43/36] MFLO/Set Number Of Reacquisition Attempts Response
[43/37] MFLO/Get Number Of Reacquisition Attempts Response
[43/40] MFLO/Get Active MLC List Response
1)
2)
3)
4)
5)
6)
7)
For 'WCDMA Decode Statistics' view, use previous PID's TBS if TBS is 0 and
current pid is a retransmission
Add 10 Mb limit to ISF file size limit options
Correct energy calculation for List Search V2 logs in 'WCDMA Pilot Scanner'
display
Fix bug when removing columns in 'FLO Status' display
Correctly delete excess rows in 'WCDMA MAC Parameters' display
QXDM Extensions updates:
Add files:
GPSOnePDECarrier2Noise.html
GPSOnePDECarrier2Noise.txt
ISF-Traffic.html
Database updates:
Add Log name:
0x1350 VcTcxo Manager Automatic Frequency Control
Correct Log name:
0x1335 IP Statistics
Add Log definition:
0x1335 IP Statistics
Add Events:
1136 SIP Register Start
1137 SIP Register Done
1138 SIP Call Setup Start
1139 SIP Call Setup Done
1140 SIP Call Release Start
1141 SIP Call Release Done
1142 Audio Frame Sent To Decoder
1143 Video Frame Sent To Decoder
1144 DEC Render Frame
1145 DEC Render Done
1146 DEC Start Decoding
1147 DEC Frame Decoded
1148 V Encoded
1190 Overhead Broadcast Channel Change
1)
2)
Fix 'Data Protocol Logging' view to correctly set the protocol direction
Database updates:
Add Events:
1182 VFE Message Configuration Complete
1183 VFE Message Idle Complete
1184 VFE Message Update Complete
1185 VFE Message AE AWB Statistics
1186 DSP Video Encoder Download Done
1187 DSP Video Encoder Selection Done
1188 DSP Video Encoder Configuration Done
1189 DSP Video Encoder Frame Done

1)
2)
3)
4)
ISF settings are now persistent (File->Item Store Settings)

Update user guide documentation
Update getGpsOneFiles.exe:
Add script file updates for gpsOne team
Database updates:
Add Log name:
0x1335 PS Statistics IP
0x116D QTV RTP Statistics
Add Events:
947 QTV Streaming URL Opening
948 QTV Clip Ended Version 2

NOTE: QXDM no longer generates legacy DLF logs now that ISF logs are
supported by QCAT and APEX. For backwards compatibility with third party
DLF-based applications, use the ISF Converter, included with QXDM and
available from the QXDM Tools menu.
1)
2)
3)
4)
5)
6)
The legacy 'Logging View' now generates ISF files rather than legacy DLF
files, with the following behavior:
a) When brought up it clears the current item store
b) When closed it saves the current item store to an ISF file with an
auto-generated name consistent with the past DLF naming convention
(MYYYYMMDD_HHMMSS.isf)
c) The contents of the ISF will be all items received between (a) and (b),
not just the items displayed in the 'Logging View' list
Add HDR displays:
HDR Rev. A Multi-User Packet User Statistics (internal-only)
HDR Rev. A Multi-User Packet Forward Statistics
Add modulation scheme tallies to 'HSDPA Decoding Stats' view
Add new Binding Type to 'FLO Status' view
Modify installer to require user to uninstall existing incompatible versions
prior to proceeding with a new installation
Database updates:
Add support for internal-only diag entitites and fields
Add model strings for MFLO, 6280, and QSC chips
Add MSM Revision strings for 6275 and 6800A
Obsolete Logs:
0x11FA Obsolete - MFLO OIS PLP Statistics Dynamic Params
0x11FC Obsolete - MFLO OIS Info Static Params
0x11FF Obsolete - MFLO Stream Info Static Params
Add Log names:
0x11C0 QTV DSP Slice Buffer
0x11C1 QTV Command Logging

0x134F Call Manager Serving System Event
Add Logs:
0x1009 Forward Link Vocoder
0x100A Reverse Link Vocoder
0x100E Markov Frame Rate Statistics
0x1011 Vocoder Error Mask
0x1012 Analog Voice Channel
0x1013 Access Channel Probe
0x1016 Sparse AGC / Closed Loop Power Control
0x1017 Band Change
0x101E Analog Handoff
0x101F FM Slot Statistics
0x1020 FOCC Word Sync Count
0x1025 Partial RLP RX Frames
0x1026 Partial RLP TX Frames
0x1162 RLP Fundicated Rx Frames
0x1163 RLP Fundicated Tx Frames
0x1211 MFLO OIS PLP Statistics Dynamic Params
0x1212 MFLO OIS Info Static Params
0x1216 MFLO Stream Info Static Params
Add Event:
946 QTV Streaming URL Open
Correct Event definition:
1167 WLAN CP
1181 CM Call Event Origination Throttle
Add Subsystem Dispatch Requests/Responses:
[19/0] EFS2/Hello Request
[19/0] EFS2/Hello Response
[19/1] EFS2/Query Request
[19/1] EFS2/Query Response
2823 consortium_config
1)
2)
3)
Correct behavior of 'Save Items' menu command, broken since build 3.08.99
Add support for new logs in 'FLO Status' view that replace obsolete logs
Display/Hide PRE/POST Parameter rows based on checking/unchecking a
checkbox in 'FLO Status' display
4) Map DRC indices 13 and 14 for HDR Rev. A support in 'HDR Air Link
Summary' display
5) If QXDM is unable to get registry save/restore priveledges:
Add warning string to item store upon startup
Disable load/save config menu items and underlying functions
6) In 'Application Statistics' view, display 'Unknown' for duration of
ISFs whose first or last generic timestamp is zero (only an issue
for converted DLF files)
7) Add support for log 0x413F to 'WCDMA Pilot Scanner' display
8) Correct 'poke' legacy command conversion
9) Item tester update:
Improve layout and resizing support
Add/update descriptions for Events and their fields
Correct Log names:
0x4013 WCDMA Compressed Mode Block Error Rate
0x413F WCDMA List Search, Version 2
0x5073 GSM GSTMR Adjust
Add Logs:
0x1193 1xEV-DO Rev. A Multi-User Packet Forward Statistics

0x1213 MFLO MLC PLP Statistics Post Params
0x1214 MFLO MLC Location Dynamic Params
0x1215 MFLO Bound Stream List Params
0x1283 1xEV-DO Rev. A Multi-User Packet User Statistics
0x1FFD Tool Version
0x4013 WCDMA Compressed Mode Block Error Rate
0x413F WCDMA List Search, Version 2
0x5073 GSM GSTMR Adjust
Obsolete Logs:
0x11EF Obsolete - MFLO MLC Location Dynamic Params
0x120A Obsolete - MFLO Bound Stream List Params
0x120B Obsolete - MFLO MLC PLP Statistics Post Params
Add Events:
1117 BCMCS SRVC Available
1176 BCMCS SRVC Lost
1177 BCMCS Flow Registered
1178 BCMCS Flow Deregistered
1179 BCMCS Flow Status Changed
1180 Camera SVCS X
Add Message Levels/Category:
6037 Broadcast FLO
Add enum entries for NV Item:
10 pref_mode
1)
2)
3)
Enhance View Bar's dropdown menu:

Add display categorization
Provide better searching/selection support
Correct 'GPS One PDE Information' view:
Correct processing of Log 0x1036
Update Satellite Information supported by Log 0x1037
Database updates:
Add Subsytem Request/Response:
[41/1] WLAN/Set IP Information Request/Response
[41/2] WLAN/Get IP Information Request/Response
[41/3] WLAN/Set MAC Address Request/Response
[41/4] WLAN/Get MAC Address Request/Response
[41/5] WLAN/Set Parameters Request/Response
[41/6] WLAN/Get Parameters Request/Response
[41/7] WLAN/Get State Request/Response
Add Message Levels/Category:
39 QIP Call
Add NV item 3634 DDTM Settings

Product Release: This is a patch release for version 3.09.00
1)
Correct behavior of 'Save Items' menu command broken in QXDM 3.09.00.

Using the 'Save Items' command in version 3.9.00 will result in lost data.
It is strongly recommended that users upgrade to this release as soon as
possible to address this problem.

NOTE: ISFs collected with this and newer versions of QXDM will not load
in older versions of DM tools since the underlying file format has
changed. Remember to upgrade QXDM early and often!
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
Introduce Version 2 of ISF file format featuring less indexing overhead

Add 'Item Store Settings' dialog for advanced ISF control, available under
the 'File' menu
Item colors are now determined at runtime for all items but strings
Rework parsing hint support to allow for 'auto-detection' in CDMA OTA logs
Enhance ISF playback algorithm to perform closer to original traffic rate
Enhance playback dialog to support 'compact' mode
Support keyboard shortcuts in QXDM for first 10 annotations
Correct DLF format of GPS items
Add 'FLO Channel Estimation' display
Add 'WCDMA Pilot Scanner' display
Add 'GPS One PDE Information' display
Add 'Call Manager' display
Add support for user-defined color override table (UserItemColor.txt)
Add support for user-defined annotation override table (UserAnnotation.txt)
Add support for user-defined cell information table (UserCellData.txt)
Add support for position information to user-defined cell information table
Rewrite QXDM 'Application Statistics' display based on property grid control
Enhance 'GPS Server Info' display:
Track data validity
Display metric/imperial units
Correct units for speed (knots vs. km/hr)
Add string values for GPS time
Add support for position specific cell mapping in 'CDMA Pilot Information'
display
Correct 'CDMA QPCH Information' display fields:
I/Q channel amplitude fields
Common/diversity pilot energy fields
Correct column ordering problem with 'FLO Status' view
Modify default text color for disabled property grid control items for
readability
Add final draft changes to revision W of QXDM User Guide
Database Editor update:
Correctly parse a field id as entered by a user for reused fields
Database updates:
Add version 2 of 'Acquisition Info' subpacket to 'Searcher TNG' logs
Add Log name:
0x1334 Port Assignment Status
Add Logs:
0x120E MFLO FTAP WOIS Params
0x120F MFLO FTAP LOIS Params
0x1210 MFLO FTAP WID LID Params
0x120C MFLO FTAP Packet Record Header Param
0x120D MFLO FTAP Packet Records Params
0x414F WCDMA List Search
Add Events:
1167 WLAN CP
1168 ARP
1169 DHCP
1171 EAP
1173 Camera SVCS Start
1174 Camera SVCS Stop
Correct format specifier for Event:
1129 HS Serving Cell Change
[9/10] UMTS/Call Manager State Request/Response
[13/0] GPS/Start Session Request/Response
[13/1] GPS/End Session Request/Response

[13/2] GPS/Session State Request/Response
[13/3] GPS/Set NV Parameter Request/Response
[13/4] GPS/Get Last Position Request/Response
[13/8] GPS/Start DIAG Task Request/Response
[15/3] Call Manager/CDMA Call Origination Request/Response
[15/4] Call Manager/Call End Request/Response
[15/5] Call Manager/WCDMA Call Origination Request/Response
[15/6] Call Manager/GSM Call Origination Request/Response
[43/44] MFLO Enable FTAP PLP Data
[43/45] MFLO Enable FTAP OIS Reception Mode
[43/46] MFLO Enable FTAP WICLIC Reception Mode
[43/47] MFLO Get Control Channel Load Status
Correct Subsystem Response definition:
[15/0] Call Manager/State Info Response
Correct format specifier for Subsystem Response:
[9/0] UMTS Version Response
1)
2)
3)
4)
Add 'CDMA Paging Message Error Rate' display

Add 'CDMA QPCH Information' display
getGpsOneFiles.exe updates:
Restore missing logging functionality to gpsOne scripts:
TCal.scr
sensitivity_cc_SA2.scr
testFAD_SA2.scr
testFAD_SA2_jadoff.scr
testFAD_noSA2.scr
testFAD_noSA2_jadoff.scr
Database updates:
Add Log names:
0x525D GSM G2W Searcher Step 1
0x525E GSM G2W Searcher Step 2
0x525F GSM G2W Searcher Step 3
0x5260 GSM G2W Searcher List
Obsolete Log:
0x11B9 Obsolete - QTV Pseudo Streaming 2 Get Response Packet
Add Log:
0x1030 Quick Paging Channel
0x10BC Quick Paging Channel, Version 2

1)
2)
3)
4)
Add
QTV
QTV
QTV
QTV
QTV
Add
FLO
QTV Bit Rate Graphs:

Audio Video Sync
Buffer Occupancy
Interarrival Jitter
Packets Lost
Streaming RX Statistics
support to WCDMA RLC AM Channel Stats for log 0x4138
Status View updates:
Remove "Reset Table" button
Add and remove FLO columns based on log content
Add PRE and POST Params fields from log 0x11F9 and 0x120B
Database updates:
Add Log names:
0x132F QDJ Enqueue
0x1330 QDJ Dequeue

0x1331 QDJ Update
0x1332 QDTX Encoder
0x1333 QDTX Decoder
0x11BF QTV ARM Video Decode Statistics
Add Log name/definition:
Correct Log names:
0x11E5 Internal - GPS Bandwidth Test Info
0x420D Internal - WCDMA HS Pessimistic CQI
[27/0] CDMA 1x MUX/Frame Error Rate Request
[27/0] CDMA 1x MUX/Frame Error Rate Response
[27/1] CDMA 1x MUX/Paging Statistics Request
[27/1] CDMA 1x MUX/Paging Statistics Response
[27/2] CDMA 1x MUX/DV Information Log Mask Update Request
Add Message Levels/Categories:
6034 BREW
6035 QDJ
6036 QDTX
1)
2)
3)
4)
5)
6)
7)
8)
9)
Update 'WCDMA TA' display:

Enable support for graphing neighbor paths of log 0x4006
Add HS/serving/neighbor reference finger indicator
Update 'Data Protocol Logging' view to latest data team requirements
Correct cases in 'FLO Status' view for requesting Subsystem Request
[43/2] 'Start FLO Request'
Use correct DIAG entity structure in 'NV Browser' view when parsing NV
read/write responses
Correct legacy conversion of 'peek' and 'poke' commands
Fallback to SendRawRequest() when mapping legacy 'gps_sess_ctrl'
property command
Fix issue with GPS port persistence
QXDM GPS Position Server update:
Fix connection issue with certain COM ports
Database updates:
Add Log category:
QoS Spec Logging
Add Log names:
0x132E QoS Modified
0x420D WCDMA HS Pessimistic CQI
Add Logs:
0x132B QoS Requested
0x132C QoS Granted
0x132D QoS State
0x4004 WCDMA DRX Mode
0x4109 WCDMA Transport Channels Uplink
0x410E WCDMA RM UL
0x4112 WCDMA Downlink Transport Channel Debugging
0x4113 WCDMA TB Set Status (CRC)
0x4115 WCDMA Downlink Transport Format Combination
0x414C WCDMA Step 1 Search
0x414D WCDMA Step 2 Search
0x414E WCDMA Step 3 Search
0x414F WCDMA List Search
0x4160 WCDMA RACH Parameters
0x4166 WCDMA UL DPCH Power Information
Obsolete Logs:
0x4205 Obsolete - WCDMA HS Decode Status
0x4207 Obsolete - WCDMA Compact UL HS DPCCH Information
Move Logs to 'Common -> QTV -> Streaming -> RTSP' category:
0x11BB QTV RTSP Options
0x11BC QTV RTSP Get Parameter
0x11BD QTV RTSP Set Parameter
Correct Log names:
0x132B QoS Requested
0x132C QoS Granted
0x132D QoS State
0x4006 WCDMA Active/Neighbor Finger TA Info
0x103F Bluetooth Baseband General
Add Events:
1163 HDR OVHD BC MSG RX
1164 HDR OVHD T BC Supervision
1165 HDR LMAC SET BCMCS Page Cycle
1166 HDR HMP Session Closed
Add Diag Request/Response name:
140 Change Port Settings Request/Response
Correct Subsystem Request/Response definitions:
[30/3] CDMA 1xEV/Reset MRLP Stats Request/Response
[42/4] Data/DPL Set Interface Logging Request/Response
[43/39] MFLO/Get FLO Substate Request/Response
Add/correct enum values for Subsystem Request/Response definitions:
[43/1] MFLO/Get FLO State Response
[43/9] MFLO/Activate Flow Request
Add NV items:
3524 WCDMA DL Frequency
3525 WCDMA DL Frequency Enabled
1)
2)
3)
Add 'CDMA Pilot Information' display

Support pilot set based filtering in 'CDMA Temporal Analyzer' view
Add support for log 0x4006 to following displays:
'WCDMA Active Set PSC Strength'
'WCDMA Temporal Analyzer'
4) Add 'Window'->'Clear Most' and 'Window'->'Clear All' commands
These allow one to clear all views that support the clear command at once
(either excluding or including the 'Item View'). Note that clearing the
'Item View' is not recommended. Also note that legacy 'Logging View' is
only affected by these commands if the 'Item View' is cleared.
5) Add file annotation menu, available through 'File'->'Annotate'
6) Correct RequestNamedItem() and RequestNamedItemFile() commands in Command
Interface
7) Remove PRE-RS CB information from 'FLO Status' display due to log 0x11F9
correction
8) Correct conversion of 'dipsw' legacy scripting command
9) DB Editor update:
Add support for hexadecimal enum entries
Add Log:
0x4006 WCDMA Finger TA - HS Information, Version 2
0x11F9 MFLO MLC PLP Stats Dynamic Params
Add/Modify enum entries for Events:
2053 HDR CMD
2054 HDR CMD Ignored State
2055 HDR IND
2056 HDR IND IGND State
2068 HDR OVHD Get CC
Add Diag Requests/Responses:
8 Byte Output Request/Response
9 Word Output Request/Response

10 Byte Input Request/Response
11 Word Input Request/Response
17 Peek NV Memory Request/Response
18 Poke NV Memory Request/Response
33 Emulate Handset Lock/Unlock Request/Response
34 Emulate Handset Display Request/Response
42 Retrieve Error Record Request/Response
43 Clear Error Record Request/Response
44 Symbol Error Rate Counter Reset Request/Response
46 Run Specified Test Request/Response
47 Get DIP Switch Settings Request/Response
48 Set DIP Switch Settings Request/Response
49 Start/Stop Vocoder PCM Loopback Request/Response
50 Start/Stop vocoder PKT Loopback Request/Response
64 Get Pilot Set Information Request/Response
65 Send Service Programming Code Request/Response
68 Serial Mode Change Request/Response
70 Send Security Password Request/Response
72 Write Preferred Roaming List Request/Response
Correct Subsystem Request/Response definitions:
[30/3] CDMA 1x Call Processing/Paging Message Error Rate Statistics
Request
[30/3] CDMA 1x Call Processing/Paging Message Error Rate Statistics
Response
Add NV Items: 3515-3523
Correct NV Item definitions:
3475 Set Voice Volume
3476 Set Media Volume
1)
2)
3)
4)
6)
5)
6)
7)
8)
9)
Replace Legacy Scripting Interface with database-derived solution:

a) Add support for legacy commands through conversion to equivalent
Command Prompt Interface commands
b) Update 'Script Help For DM Commands' view to reflect changes
Add support for read-only item store files:
a) QXDM and Core Automation load ISFs in read-only mode
b) ISF Converter, ISF Properties and PPP Extractor open all ISFs in readonly mode
c) Disable features that would generate a new item or remove existing items
within QXDM when an ISF is loaded in read-only mode:
- Replay Items (disabled)
- Communications (disabled)
- Commmand Input (disabled when disconnected)
- Clear Items in the Item View (returns error)
d) Add ISF read/write mode to 'Application Statistics' display
Add selection of views grouped by technology, available by selecting
View->New from menu
Add GetItemDLFBuffer() method to IColorItem interface, which allows one to
get the item contents in the legacy DLF file format
Add FLO Status display
Add 'GPS Server Info' display
Correct DRC 7 field output in 'HDR Rev A Single User Forward Statistics
Summary' view
User Guide updates:
Update section 3.8 description of the QXDM command interface
Combine chapter 7 and chapter 9 into one chapter, Command Prompt Interface
getGpsOneFiles.exe update:
Add converted scripts and DB IS-801 message definition files
DB Editor updates:
Add support for different byte ordering for diag entities
Add support for array sizes based on simple expressions

Add support for variable padding to next byte boundary
Fix export bug that only partially exported a diag entity
Fix memory leak when deleting field descriptions
Add MediaFLO Logs and Subsystem Requests/Responses
Ensure all events are represented in the Diag table
Correct Log name:
0x119E Srch TNG Sleep Statistics
Add Events:
1156 GPS CME Position Request
1157 GPS CME Fix Start
1158 GPS CME Fix End
1159 GPS Seed CLM
1160 GPS Seed SID
1161 GPS Seed SL
1162 GPS Seed Get
Correct Event definitions:
1117 HDR BCMCS Flow State Change
1129 EVENT_HS_SERVING_CELL_CHANGE
1130 EVENT_HS_DSCH_STATUS
1159 GPS Seed CLM
2111 HDR BCMCS Flow State Entry
Correct Diag Request definition:
108 GPS Session Control Request
Correct Subsystem Request definition:
[5/11] CDMA 1xEV/MCS Debug Request
38 Position Engine
6032 QTV QCamera
6033 QTV QCamcorder
1877 RF Band Configuration
3044 Battery Manager Battery Statistics
3204 IM Supported Bearers
3205 IM Supported CIR Methods
3446 TRM Configuration
3438 Array of last accepted SQN 1
3439 Array of last accepted SQN 2
Obsolete NV Items: 1350,1390,1468,1546,1625,1714,1793,1928,2844,3055-3058
Prior Release (Version 3.07.17) 07/27/2005 (Failed Build)
1)
2)
3)
4)
5)
6)
7)
Replace InstallShield Installer with new Windows Installer

Fix invalid field index check in 'REX Profiling' display
Add ISF file name/status to 'Application Statistics' view
'Load Item Store' dialog now remembers last file loaded
Fix memory/handle leaks in legacy command interface processing
In 'HDR Rev. A Single-User Forward Statistics Summary' display indicate
expandable rows by changing cursor to hand icon
Database updates:
Add Logs:
0x1036 GPS IS-801 Forward Link
0x1037 GPS IS-801 Reverse Link
0x1156 System Level Task Profiling
0x5205 GPRS Uplink RLC Header
0x5206 GPRS Downlink RLC Header
Add Diag Request/Response:
108 GPS Session Control Request
108 GPS Session Control Response

Correct NV items:
561 SMS GW
2809 Set Date Format
3323 Browser Show Title Region
3465 HDR Idle Enhanced Config
1)
Convert 'HDR Multi-Flow RLP Statistics' display into two separate displays:
'HDR Multi-Flow RLP Forward Statistics'
'HDR Multi-Flow RLP Reverse Statistics'
2) DB Editor updates:
Re-enable Drag and Drop in the main tree view
Prompt user to save modified DB when selecting File/Close
Remember the Find Dialog settings that the user selects
Add debug message SSID names for new QTV subsystems and rename deprecated
subsystem
to 'QTV Legacy Applications'
Add Log name:
0x11BE QTV Video Bitstream
Add Logs:
0x132B 1xEV-DO QoS Requested
0x132C 1xEV-DO QoS Granted
0x132D 1xEV-DO QoS State
Add Events:
1134 GPS PD CME Session Start
1135 GPS PD CME Session End
Add enum entries for Events:
2055 EVENT_T_HDR_IND
2056 EVENT_T_HDR_IND_IGND_STATE
1583 C0 BC3 VGA Gain Offset vs Frequency
1)
2)
3)
4)
5)
6)
7)
8)
9)
NOTE: QXDM no longer attempts to connect to a COM port read in

from persistence when started via automation.
Add 'HDR SCP Custom Config' display.
Add command line option '/isf' to be used to open an ISF. E.g.:
qxdm.exe /isf c:\temp\myLogFile.isf
Register ISF file type with Windows when QXDM is run to enable opening
an ISF from the Windows shell by double clicking on a file with the
.isf extension.
Correct invalid values being returned by automation methods where
the type of the return value is VARIANT_BOOL.
Add GetItemSize() automation method to IColorItem interface.
Include DM Core Automation examples:
DroppedMsgs.js - Generate dropped message statistics from one or more ISFs
ISFProps.js
- Generate item statistics from one or more ISFs
No longer (re)generate dropped debug message strings during ISF playback
(use DroppedMsgs.js instead).
Add script updates to getGpsOneFiles.exe in the Extensions folder:
sensitivity_98.scr
detectJ.scr
idle_detectJ.scr
idle_sensitivity_98.scr
TCal.scr
qanalyze2.pl
Correct NV item 475 name "HDR SCP Session Status"
Correct definition for NV item 3458 "HDR SCP Subtype Custom Config"
Correct event 1129 name "EVENT_HS_SERVING_CELL_CHANGE".
1)
Add Core Automation server (DMCoreAutomation.ItemStoreFiles) for

post-processing and analysis of existing item store files. Refer to
DM Core Framework Automation Interface Specification document in the QXDM
Start
Programs folder.
2) Add current TPC index for PSC to graph legend of 'WCDMA Active Set PSC
Strength'
view, as well as the appropriate disclaimer
3) Modify 'Data Protocol Logging' view to remove prior restrictions on
snaplength
and to make 80 the default length
4) Add automation methods to IColorItemFields interface:
GetFieldIndexFrom()
GetFieldIndexByID()
GetFieldIndexFromByID()
Export of an Event or NV Item now correctly includes its description
Remove F8-key association from the old 'Sort' command
Fix the 'Edit Category Properties' text in the Edit menu
Add Log names:
0x11BB QTV RTSP Options
0x11BC QTV RTSP Get Parameter
0x11BD QTV RTSP Set Parameter
Correct Event definition:
1010 WCDMA PRACH
Add Events:
1129 Serving Cell Change
1130 HS DSCH Status
1131 SMGMM Request Sent
1132 SMGMM Reject Received
1133 LINUX Application Stop
Add NV Items:
932 Process Incoming CS Data Call As Internal
3447-3458
Add Message Categories/Levels (Low-Fatal):
5016 DS Real Time Transport Protocol
5017 DS Session Initiation Protocol Stack
1)
2)
3)
Add 'HDR Multi-Flow RLP Statistics' display

Rewrite 'Memory Viewer' display
Add reset hotlink property to 'CDMA Retrievable Parameters' display, used
to reset all CDMA retrievable parameters
4) 'HDR Air Link Summary' and 'HDR Power' graph displays now use target
reported
system time for X-axis (as opposed to PN roll count) and support cursors
5) Derive active set membership directly from logs 0x4003/0x4202 (WCDMA TA
finger
info) instead of 0x4110 (WCDMA active set) for 'WCDMA Active Set PSC
Strength' view
6) Add SyncToItem(), SyncToClientItem() IQXDM2 automation methods
7) User guide updates:
Update Memory Viewer documentation
Add graph context menu description for Save Image
Add SyncToItem(), SyncToClientItem() IQXDM2 automation methods
Correct error that prevented fragments from being 'moved down' in diag
entity tree view
Introduce nested structure type Reference Counting
Changing name of a new reused field is now persistent
When changing the id of a structure, the user interface correctly reflects
the change
Improve performance by removing unnecessary sorting capability
Remove unnecessary combo-box allowing viewing of uncategorized diag entities
Add Log names:
0x1277 1xEV-DO MultiRLP RX Partial
0x1278 1xEV-DO MultiRLP TX Partial
0x7154 UMTS NAS HPLMN Search Timer Expire
Add Logs:
0x1275 1xEV-DO MultiRLP Reverse Statistics
0x1276 1xEV-DO MultiRLP Forward Statistics
0x7151 UMTS NAS FPLMN List Update
0x7152 UMTS NAS FPLMN List
0x7153 UMTS NAS HPLMN Search Timer Start
0x7155 UMTS NAS HPLMN Search Start
0x7156 UMTS NAS HPLMN Search End
0x4010 WCDMA Power Control with Compressed Mode
Add enumerations for Log:
0x7133 UMTS NAS CS Connection Management Call Setup ('CC State' field)
4,17 WCDMA/Reacquisition Slew Stats Request/Response
4,18 WCDMA/Reacquisition Searcher Stats Request/Response
5,14 CDMA 1xEV/Reset MRLP Stats Request/Response
8,2 GSM/TMC State Request/Response
8,3 GSM/Call Origination Request/Response
8,4 GSM/Call End Request/Response
Add enumerations for Subsystem Response:
30,2 CDMA 1x Call Processing/MC Log State Response ('Substate' field)
Correct NV Items: 2509 to 2512
1)
HTML views:
Enhance style for HTML displays
Remove extra empty rows from AAGPS displays
Correct faulty display registration for views:
'GPRS RLC Statistics'
'GSM 2G/3G Serving And Neighboring Cell Information'
Correctly handle disabled SCCH in 'WCDMA HSDPA Configuration' display
Add consistency across all WCDMA uplink/downlink AM/TM/UM displays
2) Add support for saving graph display contents to image files (BMP, JPG, PNG
formats)
by selecting 'Save Image...' from the context menu
3) Correct 'Data Protocol Logging' view:
Handle uninitialized SnapLength
Update the order of the FBit, Direction and LBit parameters as a result
of a documentation correction
Add support to 'HDR Temporal Analyzer' display for Log
0x127C 1xEV-DO Searcher, Version 3
5) Implement CQI data value rounding for 'WCDMA HSDPA Link Statistics' view
Add Log name:
0x11BA QTV CMX Audio Input Data
Add Logs:
0x1279 1xEV-DO Equalizer Data
0x127A 1xEV-DO Equalizer C/I
0x713F UMTS TX Vocoder Frame
0x7140 UMTS RX Vocoder Frame
0x1279 1xEV-DO Equalizer Data
0x127A 1xEV-DO Equalizer C/I
0x5071 GSM L1 Surround Cell BA List
0x5134 GSM RR Cell Information
0x513A GSM RR SACCH Measurement Report
0x51F8 GPRS Mobile Allocation
0x51FF GPRS Packet System Information 3
Add Events:
1127 GPS Get Parameter
1128 GPS Get Parameter BS Information
Correct Diag Request/Response definitions:
5 Poke BYTE Request/Response
6 Poke WORD Request/Response
7 Poke DWORD Request/Response
Add Subsystem Request/Response:
4/12 WCDMA/Call Originate Request/Response
Correct Subsystem Request/Response definition:
30/0 CDMA 1x Call Processing/Dynamic Feature Verify Request/Response
30/1 CDMA 1x Call Processing/Dynamic Feature Query Response
30/7 CDMA 1x Call Processing/MC Diag Subsystem DF Items Query
Request/Response
30/8 CDMA 1x Call Processing/MC Diag Subsystem DF Items Verify
Request/Response
30/9 CDMA 1x Call Processing/MC Diag Subsystem DF Items Write
Request/Response
42/4 Data/DPL Set Interface Logging Request/Response
933 df
4)

1) Replace 'Mux Statistics' view with 'CDMA Retrievable Parameters' view
2) Replace 'Script Help For Legacy DM commands' view with 'Script Help For DM
Commands' view
3) Add support for QCAT5 in XQCAT dynamic parser
4) Upgrade IPlotLibrary graph control to version 3.0.5.565
5) Remove obsolete property and javascript files
6) Remove support for legacy property HTML views
7) Correctly handle user changing the current theme and/or system colors in
property
grid based displays
8) Correctly handle user changing system colors in 'GSM Random Access Attempts'
display,
'GSM GPRS Information' display, and VIL parsed item list pane
9) User guide updates:
Add clarification for GetConfiguredItemFields() method
Remove obsolete Property interface descriptions
Add Log name:
0x12E9 Internal - GPS Position Engine Info
Add Events:
1124 GPS Jammer Detection Test Pass
1125 GPS Jammer Detection Test Failure
1126 Jammer Detect Noise Statistics
Add NV Items:
3384 pb_recordasound
3385 pb_auto_power_off
1119 DS CAM Timer
1120 DS RDUD Timer
1123 DS3G CAM Flow Control Timer
Correct NV Item definitions: 1943, 3009 to 3013
Move Log to 'Known Log Items -> Common -> AMPS/IS95/IS2000 -> Searcher ->
Dev'
0x11A3 Reserved
Move to Logs to 'Known Log Items -> Common -> AMPS/IS95/IS2000 -> Searcher
-> Internal'
0x11A9 Srch TC Call Statistics
0x11AA Srch TC Set Maintenance
1)
Add views:
'GSM Power Scan Results'
'GSM Surrounding Cells'
2) User Guide update:
Add documentation for 'Process Items...'
Revise IColorItem section
Include definitions for Field Test Application and Application subsystem
dispatch commands
Add Log names:
0x11B6 QTV Pseudo Streaming 2 Statistics
0x11B7 QTV Pseudo Streaming 2 Get Request
0x11B8 QTV Pseudo Streaming 2 Get Response Header
0x11B9 QTV Pseudo Streaming 2 Get Response Packet
Add Messages:
[6003/22] QTV Applications/Broadcast FLO
6500 Application DSP Tasks Default
6501 Application DSP Tasks RTOS Kernel
6502 Application DSP Tasks AFE Task
6503 Application DSP Tasks Voice Processing Task
6504 Application DSP Tasks Voice Decoder Task
6505 Application DSP Tasks Voice Encoder Task
6506 Application DSP Tasks VFE Task
0x5064 GSM L1 Power Scan Results
0x513C GSM RR BA List
1943 meid
Add enum for Diag Response:
124 Extended Build ID Response
4) DB Editor update:
Ensure Enumerated Types have non-empty names

Remove numeric field limits for the field size, offset and repeat count
Correctly disable the 'repeat count' field when not valid
When the user selects 'new' as the field id, the field attributes are left
unchanged
Correctly allocate a new field for a user if they manually type a field id
that doesnt exist, as opposed to selecting <new>
Display the Field name along with its Id in the combo-box inside the edit
fragment dialog
Disallow users from entering non-numeric characters in the field id combobox
1) Add 'Process Items...' support to item list views
2) Add support for 'Hide Hex Pane By Default' option, which hides the
hexadecimal
pane of newly created non-legacy item list based views when enabled
3) Initialize new item list appearance/find configs with last configs set by
user
4) Modify list header column persistence management to be compatible with
autosizing via double-clicking
5) Add automation methods to IColorItem:
GetConfiguredItemFields()
GetItemFieldValue()
GetItemFieldValueText()
6) User Guide updates:
Document subsystem dispatch v2 delayted response
Describe new automation functions GetConfigureItemFields(),
GetItemFieldValue(), GetItemFieldValueText()
Document new menu item Options->Hide Hex Pane By Default
Document new context menu item 'Process Items...'
Add Log names:
0x4163 WCDMA L1 UL TFC Power Limiting
0x420C WCDMA TB Set Status, Version 2
0x11AB Search TNG ZZ Profile
0x11AC Search TNG Triage
0x11AD Search Non-Slotted Idle
0x11AE Search Sect Dump
0x11AF Search Finger Driver Dump
0x12E6 GPS Decoded Ephemeris
0x12E7 GPS Decoded Almanac
0x12E8 Transceiver Resource Manager
Add Subsystem Request/Response names:
12 REX
14 Wireless Messaging Service
15 Call Manager
16 Handset
17 Audio Settings
18 Diagnostic Services
19 EFS2
27 CDMA 1x MUX
29 CDMA 1x Searcher
31 Applications
33 Generic SIM
34 Task Main Controller
36 Power Management
39 Clock Regime
31 Digital TV
33 EFS
34 IRDA
35 FM Radio
36 Accessory Attachment Manager
37 Battery Manager
Obsolete Log:
0x4715 Obsolete - WCDMA L1 UL TFC Power Limiting
1)
2)
3)
Update 'HDR Rev. A Single-User Forward Statistics Summary' view to support

corrected definition of log 0x1192
Database updates:
Add NV Item Category "MediaFLO"
0x1192 1xEV-DO Rev. A Single-User Packet Forward Statistics Summary
Correct enums for Logs:
0x4003 WCDMA Finger Info For TA - Finger/Pilot Channel Parameters
0x4202 WCDMA Finger TA - HS Information
DB Editor updates:
Correct inconsistencies when working with fields that are reused

1)
2)
Column widths are now persistent in scrolling views

Database updates:
Add Logs:
0x105E 1xEV-DO Handoff State
0x1063 1xEV-DO Reverse Power Control
0x1066 1xEV-DO ARQ Effective Receive Rate
0x106D 1xEV-DO Reverse Activity Bits Buffer
0x1072 1xEV-DO Reverse Activity Bits
0x1087 1xEV-DO Receive ATI List
0x108D 1xEV-DO Acquisition Information
0x108E 1xEV-DO Reacquisition Information
0x108F 1xEV-DO Sleep Information
0x4205 WCDMA HS Decode Status
0x4206 WCDMA HS Decode Status With Data
Correctly calculate the size of a structure that contains a repeated field
based on a constant count
Remove restrictions on number of characters entered in an Id field
1)
2)
3)
4)
Add parsing support for Subsystem Dispatch V2 Delayed Response

Reduce target load in 'Rex Profiling' view by adjusting default
configuration:
Increase 'System Update Interval' from 2000 to 10000 ms
Increase 'Task Update Interval' from 1000 to 2000 ms
Reduce 'Tasks Per Interval' from 70 to 55 tasks
Enhance 'WCDMA HSDPA Decoding Statistics' display:
Add overall 'Duplicate SB + Rate' statistic
Add 'SBLER 1st' statistics
Database updates:
Add Logs:
0x106F 1xEV-DO Page Message
5)
0x107B 1xEV-DO Traffic Channel Assignment

0x108C 1xEV-DO Data Rate Control Channel - ARQ Buffer, Version 2
Add NV Item:
3362 HDR Equalizer Control
Add Event:
1123 DS3G CAM Flow Control Timer
1119 DS CAM Timer
1120 DS RDUD Timer
Correct Diag Response definition:
112 IS-2000 Status Response
Correct Subsystem Response definition:
[8/1] GSM/Status Response
Add enums for Diag Responses:
12 DMSS Status Response
41 Mode Change Response
Add enums for Subsystem Response:
[4/15] WCDMA/Additional Status Response
Rename fields for Log:
0x1084 1xEV-DO Forward Statistics Summary
Remove empty Log name:
0x415E DB Editor updates:
Add support for Subsystem Dispatch V2 Delayed Response

1)
2)
3)
4)
5)
6)
7)
Add 'WCDMA Active Set PSC Strength' display

Add "HDR Rev. A Single-User Forward Statistics Summary" display
Add ability to export text representation of configured items
(File->View Registrations and Filtered Views)
Add 'View Source *(Alt V)' command to support viewing of source files
referenced by debug messages
Display enum values in hexadecimal within enum combo-boxes when field is
hexadecimal (NV Browser view and Item Tester)
In the Item Tester, subsystem V2 requests now produce QXDM command
examples based on 'RequestItem'
Database updates:
Add Log Definitions:
0x1042 Bluetooth L2CAP
0x1043 Bluetooth Service Discovery
0x1044 Bluetooth RFCOMM Session Specific
0x1045 Bluetooth RFCOMM DLCI Connection Specific
0x1046 Bluetooth Audio Gateway
0x1192 1xEV-DO Rev. A Single-User Packet Forward Statistics Summary
Add Events:
943 QTV VDEC DIAG Decode Callback
945 QTV VDEC DIAG Status
1112 GSM AMR Mumtirate IE
1113 EPZID Hyateresis Enabled
1114 EPZID Hysteresis Disabled
1115 EPZID HT Started
1116 EPZID HT Expired
1117 HDR BCMCS Flow State Change
1118 HDR LMAC Update BC Status
1119 DS CAM Timer
1120 DS RDUD Timer
1121 DS CTA Timer
1122 DS Fallback
2111 T HDR BCMCS Flow State Entry
Add enums for Logs:
8)
0x103E Bluetooth General

0x103F Bluetooth Baseband General
0x1040 Bluetooth Baseband Device
0x1041 Bluetooth Link Manager Protocol
Add Mobile Model enums to Diag Response [0] Version Number Response:
218 W5_SURF6250
219 SIRIUS_FFA6250_W5
220 W5_FFA6250
221 SURF6550_RF6500
222 SURF6275_RTR6250A_ANOR
223 SURF6275_RTF6250A
224 SURF6275_RTF6250A_SNOR
225 SURF6275_RTR6250_P_NOR
226 SURF6275_RTR6250_P_NAND
227 FFA6275_RTR6250_P
230 JAVA_SURF6550_ZRF6500
231 JAVA_FFA6550_ZRF6500
232 SURF6800_RF6500_R
238 SURF6800_RF6500_N
239 FFA6800_RF6500
240 SURF6800_RF6500
247 SIRIUS_FFA6250_W5_T
248 SURF6275_RTR6250_P_NOR_2
249 SURF6275_RTR6250A
250 PLT6275_PLT
251 FFA6550_EZRF6500
252 FFA6100_ZRF612X
253 SURF7500
254 SURF6255_GWZRF6250T3
DB Editor updates:
Remove the "Use Field Name" checkbox from the Fragment Dialog
Remember the path of a previously saved database
No longer restrict the length of the condition field in the Fragment dialog

1)
2)
3)
4)
5)
6)
7)
8)
9)
Enhance cursor feature for graph displays:

'Null', 'Empty' graph strings mapped to '-'
Do inverse value mapping for Y-axes with custom tick lists
Add precision to Y-axis when cursor enabled (when beneficial)
Cursor is 'XY' type when graph X-axis is time
Always show milliseconds value when graph X-axis is time
Add cursor support to 'GSM EGPRS Downlink/Uplink BSN Arrival' graphs
Add combo-box input for enum fields within NV Browser and Item Tester
Add Delta ACK/NACK/CQI support to 'WCDMA HSDPA Physical Channels' view
Add support for log 0x420A to the following displays:
'WCDMA HSDPA Decoding Statistics'
'WCDMA HSDPA Link Statistics'
Migrate to version 3.3.2 of property grid control
Upgrade to SILK version 8.39
Update QXDM User Guide:
Document SaveItemStore automation method
Document 'CDMA Finger Placement' view
Database updates:
Add Log:
0x4201 'WCDMA HSDPA UL Beta Gain Table'
Add Events:
944 'QTV URL Played Is Multicast'
1046 to 1111
Correct definition for Event:
1082 'Packet Timeslot Reconfigure'
Add enums for Events to include SM OTA messages:

453 'NAS Message Sent'
454 'NAS Message Received'
Add enums for NV Item:
285 'pref_voice_so'
Add 'CDMA Cellular' and 'CDMA PCS' enums to Logs:
0x1093 'Active Set'
0x10C6 'Active Set, Version 2'
Correct enum entries for Log:
0x4210 'WCDMA MAC HS Configuration'
Move NV Item to GPS category:
1713 'BC0 GPSOne RF Delay'
Rename logs:
0x420A 'WCDMA Compact UL HS DPCCH Information'
0x420B 'WCDMA UL HS DPCCH Information'
10) Fix Mux Statistics view so it no longer generates a JScript error.
11) Update QXDM User Guide with additional Graph view descriptions.
Add support for Subsystem Dispatch Version 2 Request and Response
Provide improved functionality for Import and Export
Correct Subsystem Dialog Captions
Prevent saving packet definitions containing an empty structure
Validate fields with modifier types to ensure their dependant fields exist
Validate pad fields to ensure their dependant fields exist
1)
Port/enhance all CDMA 'TA' related graphs to new graph control:

'CDMA Temporal Analyzer' now processes searcher TNG logs
'CDMA Link Info - Forward' now processes log 0x10C2
'CDMA Link Info - Reverse' now processes log 0x10C3
'CDMA Power' correctly processes 0x10C3
All are now target time based
2) Port/enhance 'Finger Placement' display to new graph control:
'CDMA Finger Placement' now processes searcher TNG logs
3) Port/enhance 'UMTS Cell Reselection' graph to new graph control
4) Remove redundant 'Signal Information' display
(see 'CDMA Link Info - Forward/Reverse' & 'CDMA Power')
5) Rename 'Vocoder Log' to 'UMTS Vocoder Statistics'
6) Finalize WCDMA HSDPA decoding displays
'WCDMA HSDPA Decoding Statistics'
'WCDMA HSDPA Link Statistics'
7) Load Configuration now supports loading view names that have been changed.
8) Add support for log 0x4165 WCDMA AGC Version 2 in 'WCDMA Power' view
9) Add support for log 0x4210 WCDMA MAC HS Configuration in 'WCDMA MAC
Parameters' view
10) Remove obsolete property files
11) Remove obsolete views: 'Simple Test Data Services' and 'Full Test Data
Services'
12) Remove QGraph control
Add initial support for subsystem V2 DIAG entities
Add Log:
0x4005 UMTS Cell Reselection
114 Reset (S)TDSO Statistics
Correct definition for Subsystem Respons:
[5/9] CDMA 1xEV/DIP Switch Response
Correct format specifier for Diag Response:
124 Extended Build ID Response
Add enum entries for NV Item: 285 pref_voice_so
Correct enumerations for NV Items: 3032, 3204, 3212

Optional fields can now be drived from other optional fields
Add optional export summary report (Edit -> Options -> Display Summary after
Export)
No longer display irrelevant indices in 'Diag Entities' tree
Exporting an item/category now correctly exports just the item and its
category
1)
2)
3)
Remove WCDMA MAC Channel Mapping view since it only contains information
already in WCDMA MAC Parameters view.
Database updates:
Add Logs to "Known Log Items -> WCDMA -> Layer 2 - MAC & RLC":
0x4139 WCDMA RLC UL AM Statistics
Add Logs to "Known Log Items -> GSM -> GPRS":
0x51FD GPRS Packet System Information 1
0x51FF GPRS Packet System Information 3
Add Events to "Known Events -> GPS":
1108 GPS DIAG Application_Tracking Start
1109 GPS DIAG Application Tracking End
1110 GPS DIAG Application Position Success
1111 GPS DIAG Application Position Failure
0x51FE GPRS Packet System Information 2
Rename Log:
0x4149 Obsolete(v2) - WCDMA RLC UL AM Statistics
Add L4/Iguana and L4/AMSS debug message names
DB Editor updates:
Allow viewing of fields and enum entries in read-only databases
List DB Editor User Guide in Help menu
Add "Settings" selection to Edit menu, with "Export from All Tables" option

1)
2)
3)
4)
5)
6)
Remove legacy property files that have been replaced by the QXDM database.
The database access functions are to be used instead of the property
interface. Refer to the QXDM User Guide for details.
Remove legacy FTM Compile Time and FTM Run Time HTML views. Use QPST's
Factory Test Mode Application or the QXDM command-line and automation
interfaces instead.
Remove obsolete WCDMA NAS Errors view.
Migrate WCDMA CM GSM Measure view to use new graph control.
Update user guide documentation.
Database updates:
Add descriptions for the following MSM revisions:
0x03C6 MSM6500 Revision 2.4
0x0570 MSM6550 Revision 1.0
Add Log to "Known Log Items -> WCDMA -> Layer 1":
0x4166 WCDMA UL DPCH Power Information
Add Log to "Known Log Items -> GSM -> Layer 1":
0x5090 mDSP Applications
Add Event to "Known Events -> Multimedia -> QTV -> Playback State
Transitions":
942 QTV Download Data Report
943 QTV VDEC Diag Decode Callback
Correct definition for Logs:
0x4000 WCDMA Compressed Mode GSM Measurements
0x4124 WCDMA Uplink Transport Format Combination
0x4127 WCDMA Cell ID
Add enum for Log:
0x410C WCDMA Physical Channels Uplink
Correct enum for Log:
0x102A Reverse Link Frame Types
Modify enums for Events:
538 EVENT_PPP
1023 EVENT_GMM_STATE
1072 EVENT_PPP_NETMODEL
Add enums for Subsystem Request:
[5/9] CDMA 1xEV/DIP Switch Request
Convert all NV Item names to lower case
Provide improved functionality for Import and Export
Improve behavior for Open and Save database operations
Only display Diag Entity tab in Parse/Display tables
1)
2)
3)
Rename Core Dump and Profiling views to REX Core Dump and REX Profiling.
Add flow logging support for DPL view.
Database updates:
Add Logs to "Known Log Items -> Common -> AMPS/IS95/IS2000":
0x1029 Forward Link Frame Types
0x102A Reverse Link Frame Types
Add Logs to "Known Log Items -> Common -> Power Control":
0x102C Reverse Power Control
0x10C3 Reverse Power Control Statistics
Add Logs to "Known Log Items -> Common -> QTV":
0x11B4 QTV Audio Video Sync
0x11B5 QTV Streaming SDP Parameters
Add Logs to "Known Log Items -> WCDMA -> Layer 2 - MAC & RLC":
0x4132 WCDMA RLC DL AM Configuration, Version 2
0x4133 WCDMA RLC UL AM Configuration, Version 2
0x4165 WCDMA AGC, Version 2
Add Event to "Known Events -> BREW":
660 BREW App Form Item Stack Change
Add Events to "Known Events -> Multimedia -> QTV -> Playback State
Transitions":
940 QTV Fragmented File Decode Start
941 QTV Fragmented File End Success
Add Event to "Known Events -> CDMA 1xEV":
1107 HDR RUP Distance Based REG
Add DIAG request:
113 - RLP Statistics Reset Request
Add Message Level:
1007(10) Searcher/Traffic
Add NV Items:
3044 to 3049
0x4122 WCDMA RLC DL AM Configuration
0x7135 UMTS NAS MM Characteristics
Modify field names for Logs:
0x7134 UMTS NAS PS Connection Management
0x7138 UMTS UE Dynamic ID

Correct NV Item field names: 3036-3040
231 mru2_table
945 mru3_table
Modify enum for Events:
538 Event PPP
1072 Event PPP Netmodel
Add/Modify enum values:
78(14339) RUP_CONTINUE_CONNECTION_SETUP
78(61460) PACC_CONFIGURE
82(14340) SYNCHRONIZE_CONNECTION_SETUP
Modify Subsys Dispatch descriptions for flow logging:
[75,42,3] Data/DPL Get Interface Name Descriptions Request
[75,42,4] Data/DPL Set Interface Logging Request
[75,42,4] Data/DPL Set Interface Logging Response
Remove 'Internal' from HSDPA logs that have been reclassified
1)
Automation updates
Add LoadItemStore( FileName ) FileName - Fully qualified file store path
Add SaveItemStore( FileName ) FileName - Fully qualified save file path
Remove SetItemStoreSaveName()
2) Add new Item Store commands to File menu
New Items - Replaces the temporary item store with a new one
Save Items - Saves the temporary item store
3) Add support for new logs (0x701E, 0x701F) to AA-GPS Clock/Position
and AA-GPS Measurement views.
4) Migrate WCDMA Temporal Analyzer view to use new graph control
5) Add HS marker support to WCDMA Temporal Analyzer view
6) Add support to show/hide the QXDM command bar
7) Always plot the packet error rate in 'HDR Air Link Summary'
8) Ensure points are visible when preceding point is empty for HDR Power
and WCDMA Power displays
9) Database updates
Add Logs to "Known Log Items -> Common -> AMPS/IS95/IS2000 -> Searcher ->
Dev":
0x119A Srch TNG Finger Status
0x119B Srch TNG 1x Searcher Dump
0x119C Srch TNG General Status
0x119D Srch TNG Demod Status
0x119E Srch TNG Sleep Statisitics
0x119F Srch TNG Quick Paging Channel Info
0x11A0 Srch TNG AFC Info
0x11A1 Srch TNG Acquisition Info
0x11A2 Srch TNG Finger Channel Estimate
0x11A3 Srch TNG TC Statistics
Add Logs to "Known Log Items -> Common -> GPS":
0x12E3 GPS PE Position Report
0x12E4 Internal - GPS PE Position Report Extended
Add Log to "Known Log Items -> Common":
0x12E5 Mobile Display Digital Interface Host Statistics
Add Log to "Known Log Items -> WCDMA -> Layer 2 - MAC & RLC":
0x4202 Internal - WCDMA Finger TA - HS Information
Add Logs to "Known Log Items -> UMTS -> AAGPS":
0x7002 AAGPS Report Clock
0x7003 AAGPS Report Position
0x7005 AAGPS Report Measurement
0x7008 AAGPS Report RF Status
0x7009 AAGPS Report Frequency Calibration
0x700C AAGPS Report Measurement Version 2
0x701E AAGPS Report Position Version 2

0x701F AAGPS Report Measurement Version 3
0x102D Searcher And Finger
0x4003 WCDMA TA Finger Info
Add Event to "Known Events -> Common":
1106 Registration Suppressed
Add NV Items 2809 through 3043
Re-categorize NV items from Factory to RF_CDMA that match the following
patterns:
BB*, BC0*, BC1*, BC3*, BC4*, BC5*, BC6*, Band Class *, C0*, C1*, CDMA*
Re-categorize NV items from Factory to RF_PCS that match the pattern PCS*
Re-categorize NV items from Factory to GPS that match the pattern
BC? GPSOne RF Delay
10) DB Editor updates
Modify pad options and add new pad types:
pad - const padding (original)
pad - variable padding in bits
pad - variable padding in bytes
Warn when saving or exporting to existing database
Improve behavior of context menus
11) No longer install QXDMLite
1)
2)
3)
4)
5)
6)
REX Profiling enhancements

a) Use less CPU while updating tasks.
b) Add REX task CPU utilization graph.
c) Move REX core dump modeless dialog to HTML based view.
d) Add 'Auto-Launch Core Dump View' to Options menu.
Include IOComp site license for internal builds.
Add cosmetic changes to WCDMA HSDPA Decoding Statistics view.
Database updates
Add Message SSIDs for L4/Linux debug messages.
Correct format strings for NV items 2693-2808.
Support WCDMA HS TA log in legacy WCDMA TA plot.
DB Editor updates
Item/Category is no longer required to create a Diag Entity.
Item ID dropdown can now be edited.
Add 'To Format Specifier' button to facilitate creating format strings.
Improve context awareness of buttons.
Field names are now required.

1)
2)
3)
4)
5)
6)
Replace WCDMA AGC view with the following views:

WCDMA BLER
WCDMA Power Control
WCCMA Power
WCDMA Radio Bearer Rate
Add WCDMA HSDPA Link Summary graph display
Add WCDMA BLER Total and BLER Cumulative displays
Add GSM EGPRS BSN by arrival downlink and uplink graph views
GSM EGPRS LQC graph updates
a) Set X-axis titles to reflect current range.
b) Offset duplicate BSNs (within a BSN group), allowing
up to ten duplicates to be plotted and examined per BSN.
c) Process item sync notifications in EGPRS LQC graphs to
allow the user to select an item in a VIL and sync to the
proper point in an EGPRS LQC graph.
Add support for content restricted category trees
a) View Registrations dialog now only shows what
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
is actually registered for

b) Track contents (by color item key) of all non-direct ISVs
c) Present streamlined 'Refiltering' config dialog
Total all items for Application Statistics view.
Replay Items enhancements
a) Add slower ISF replay speeds
b) Reduce DM CPU utilization when replaying in NOWAIT mode
c) Add ISF file name to replay dialog title bar
Display build type in splash screen, About box, and in Item Store
as annotation string.
Database updates
Add 0x105D "1xEV-DO Searcher"
Add 0x1064 "1xEV-DO Finger"
Add 0x1089 "1xEV-DO Searcher, Version 2"
Add Debug Trace Message diag entity
Add new Events to "Known Events -> GPS" category:
1092 GPS PD Demod Sess Start
1093 GPS PD Demod Sess End
1094 GPS SV Acquired
1095 GPS SV Bit Edge Found
1096 GPS Demod Started
1097 GPS Demod Out Of Lock
1098 GPS Demod Stopped
1099 GPS Demod Preamble Found
1100 GPS Demod Frame Sync Status
1101 GPS Demod Subframe
1102 GPS Demod Ephemeris Complete
1103 GPS Demod AlmanacComplete
1104 GPS Demod Bit Edge Status
Add new Event to "Known Events -> UMTS" category:
1105 RAT Change
Add Logs:
0x4000 WCDMA Compressed Mode GSM Measurements
0x4010 WCDMA Power Control with Compressed Mode
0x4105 WCDMA AGC
0x4108 WCDMA Transport Channels Downlink
Change NV item gps1_vx_mo_max_duration from int32 to uint32
Change definitions
[5/5/9] CDMA 1xEV/DIP Switch Request
[5/5/13] CDMA 1xEV/Reset Connected State Stats Request
[6/5/13] CDMA 1xEV/Reset Connected State Stats Response
Set header timestamp of DM Version log record to 0.
Replace parsing DLL TABs (squares) with a single space when
displaying in scrolling view list control.
Dynamic item list field column widths are now persistant.
Add database generic debug message by-field parsing support.
Correctly return item timestamp through automation interface.
Remember view locations even when not maximized.

1)
2)
3)
4)
5)
Add HSDPA Decoding Statistics view.

Add HSDPA Physical Channels view.
Migrate HDR Air Link Summary view to use new graph control.
Modify HDR Air Link Summary:
0) Change 'stock' HDR Air Link Summary/Power ranges to
reflect anticipated elapsed time
1) Adjust target frame rate downwards when the span
increases (i.e. more points will be drawn each update)
in order to keep CPU utilization in check
Add accelerator keys:
F11
= 'Item View'
6)
7)
F12
= 'Filtered View'
Alt+G = Config...
Alt+M = Match Items...
Alt+R = Refilter Items...
Ctrl+Y = Sync Near Item
Alt+Y = Sync To Item
Database Updates
Add NV items 2693-2808.
Correct the version string position and background in splash screen.

1)
2)
3)
4)
5)
6)
7)
8)
9)
Replace deprecated nv_write and nv_read property interface support with

RequestNVItemWrite and RequestNVItemRead scripting commands. Refer to the
QXDM User Guide for details (Chapter 9.1 Database Access Functions).
Add QXDM command example generation to 'Item Tester' tool (accessable from
the Tools menu).
QXDM User Guide Updates:
Update 4.2 HTML Views
Add 8.2 QXDM Interface (IQXDM)
Add 9.1 Database Access Functions
Update 11 Frequently Asked Questions
Modify GSM GPRS Air Interface Summary to use new improved graph control.
Replace "GSM GPRS Air Interface Summary" Tx Timing subplot with
"GSM GPRS Tx Timing" display.
Add new "HDR Power" graph display.
No longer prompt user to save item store file during an item store load
operation unless 'Enable Item Store Saving' feature is checked.
No longer honor the cooperative lock on QPST ports so that tools like EFS
Explorer and QXDM can run simultaneously.
Database Updates
Add DIAG entity log definitions:
0x102B Fast Forward Power Control
0x4200 WCDMA HSDPA Configuration
0x4206 Internal - WCDMA HS Decode Status
0x4207 WCDMA HS-SCCH Statistics
0x4208 WCDMA HS-DSCH HARQ Statistics
0x4209 Internal - WCDMA HS CQI Statistics
0x420A WCDMA UL HS DPCCH Information
0x420B Internal - WCDMA UL HS DPCCH Information
0x4210 WCDMA MAC HS Configuration
0x4212 WCDMA MAC HS Status
0x4213 WCDMA MAC HS Reset
0x5231 GPRS Air Interface Summary
Fix DIAG entity log definitions:
0x10C2 Fast Forward Power Control Statistics

1)
2)
Correctly register new graph control

Modify GSM EGPRS Uplink/Downlink Quality displays
(Pre-release, Engineering-only builds)
0) Always plot TFI and first BSN of new group
1) Avoid overwriting TFI for BSN groups with no plotted BSNs
2) Plot vertical line annotation under TFI (BSN group demarcation)
3) Fix 'Scroll To Min/Max' command handlers for empty graphs
4) Change colors to reflect MCS family rather than header type
5) Use smaller boxes for BSN markers
6) Allow graph to be smaller (300 x 300)
3)
4)
5)
Restore deleted WCDMA MAC Channel Mapping display

Port HTML displays to new automation interface:
Active Set Information
ServiceConfigurationInfo
WCDMA MAC Channel Mapping
Database Updates
Add Logs:
0x10C6 Active Set, Version 2
0x1176 Service Configuration, Version 3
0x513C GSM RR BA List
0x521A GPRS Ready Timer Status v2
0x102E Service Configuration
0x10C5 Service Configuration, Version 2
0x4117 WCDMA MAC UL Logical Channel Parameters
0x411D WCDMA MAC DL Logical Channel Parameters

1)
2)
3)
4)
5)
6)
Add Data Protocol Logging view support for auto-generating DPL logs using
time as part of the filename.
Add Item Tester to the QXDM Start->Programs menu.
Update to use SILK 8.37
Add mimimize button to MIS replay dialog.
HTML displays port to new automation interface:
GPRS SNDCP Statistics
HDR Pilot Sets
HDR Protocol Summary
HDR Reverse Statistics
HDR RLP Statistics
Common Channel Statistics
Markov Statistics
MDR Statistics
Database Updates
Add Logs:
0x1068 CDMA 1xEV-DO Air Link Summary
0x1069 CDMA 1xEV-DO Power
0x106C 1xEV-DO Access Attempt
Add Log name:
0x12C1 Call Manager Call Event
Add Events:
1090 EVENT_SD_SRV_IND_HYBR_WLAN
1091 EVENT_SD_EVENT_ACTION_HYBR_WLAN
Add Diag Requests/Responses:
27 Reset Markov Statistics Request
36 Parameter Set Request
36 Parameter Set Response
53 Call Origination Request
54 Call Termination Request
5,13 CDMA 1xEV/Reset Connected State Statistics Request
5,13 CDMA 1xEV/Reset Connected State Statistics Response
Add enum strings for Events:
Correct NV Item definition: 1933 AMP - Hardware ID
Correct enum strings for Logs:
0x108A 1xEV-DO Finger, Version 2
0x108B 1xEV-DO Pilot Sets, Version 2
Restore enum strings for Event: 520 EVENT_CM_MODE_PREF
Add enum strings for Log: 0x1060 1xEV-DO Reverse Link Packet Summary
Correct NV Item definitions to match NV Database
1)
2)
3)
4)
5)
6)
7)
Add GSM EGPRS Uplink/Dowlink Quality displays

(Pre-release, Engineering-only builds)
Add GSM AMR Information display (CR 46750)
Add GSM Channel Parameters AMR rate information (CR 46230)
Add GPRS Serving Cell time slot information support (CR 46230)
Fix GPRS LLC display reset funtionality.
PLTProxy now remembers the selected COM port between sessions and lists only
QPST-enabled ports.
Database Updates
Add new Events:
1088 EVENT GSM AMR RATSCCH Request
1089 EVENT GSM AMR RATSCCH Response
Correct event payload:
625 WCDMA DRX Cycle
Add log names:
Known Log Items->Common->0x1273 Call Manager Phone Events
Known Log Items->SMS->0x1274 WMS Set Message List
Add log names in Known Log Items->Common->HDR/CDMA 1xEV DO:
0x1184 1xEV-DO Tune Away Information
0x1185 1xEV-DO Tune Away RRI Information
0x1186 1xEV-DO Connection Termination Statistics
0x1187 1xEV-DO Connected State Protocol Stack Statistics
0x1188 1xEV-DO Connected State Transmit Statistics
0x1189 1xEV-DO Connected State RMAC Statistics
0x118A 1xEV-DO Connected State Search Statistics
Add DIAG entities for logs:
0x5228 GPRS MAC UL TBF Establish
0x5229 GPRS MAC UL TBF Release
0x522A GPRS MAC DL TBF Establish
0x522B GPRS MAC DL TBF Release
Add new Subsystem Request/Response DIAG entities:
30,4 CDMA 1x Call Processing/MC Diag Subsystem DF Items Query Request
30,5 CDMA 1x Call Processing/MC Diag Subsystem DF Items Verify Request
30,6 CDMA 1x Call Processing/MC Diag Subsystem DF Items Write Request
30,4 CDMA 1x Call Processing/MC Diag Subsystem DF Items Query Response
30,5 CDMA 1x Call Processing/MC Diag Subsystem DF Items Verify Response
30,6 CDMA 1x Call Processing/MC Diag Subsystem DF Items Write Response
Correct payload for NV item 1095 - GSM 1900 TX Frequency Compensation.

1)
2)
3)
4)
Add database access script function:

RequestNamedItem <rspName> <reqName> <reqFields>
Add QXDMStyle.css to use as style sheet for html pages
Format html pages with style sheet:
GPRS_LLC.html
GPRS_RLC.html
GPRS_SCELL.html
Database Updates
Add Logs:
0x5079 GSM L1 Enhanced Message Metrics
0x524D Receive Message Metrics A, Version 2
0x524E Receive Message Metrics B, Version 2
0x524F Receive Message Metrics C, Version 2
0x5250 Receive Message Metrics D, Version 2
Add Events:
555 EVENT_GSM_RATSCCH_ACK_ACT_TIMER_EXPIRY
1077 GPRS Timer Expiry
1078 GPRS MAC Idle Indication
1079 GPRS Packet Channel Request
1080 GPRS Access Reject
1081 GPRS Packet Resource Request
1082 GPRS Packet Uplink Assignment
1083 GPRS Packet Downlink Assignment
1084 Packet Timeslot Reconfigure
1085 GPRS TBF Release
1086 GPRS Cell Change Order
1087 GPRS Cell Change Failure
Add Subsystem Dispatch Requests/Responses:
5,0 CDMA 1xEV/Reset Access Attempts Request
5,0 CDMA 1xEV/Reset Access Attempts Response
5,1 CDMA 1xEV/Reset Forward Stats Request
5,1 CDMA 1xEV/Reset Forward Stats Response
5,2 CDMA 1xEV/Reset Reverse Stats Request
5,2 CDMA 1xEV/Reset Reverse Stats Response
5,3 CDMA 1xEV/Reset Connection Attempts Request
5,3 CDMA 1xEV/Reset Connection Attempts Response
5,4 CDMA 1xEV/Reset Page Messages Request
5,4 CDMA 1xEV/Reset Page Messages Response
5,5 CDMA 1xEV/Reset Session Attempts Request
5,5 CDMA 1xEV/Reset Session Attempts Response
5,6 CDMA 1xEV/Reset RLP Stats Request
5,6 CDMA 1xEV/Reset RLP Stats Response
5,12 CDMA 1xEV/MCS Clear Stats Request
5,12 CDMA 1xEV/MCS Clear Stats Response
0x525C GSM Idle Mode 3G Reselect Reject
NOTE:
As a result of lobbying by Qualcomm AST (APS/ASIA), QXDM now

honors the cooperative lock on QPST ports. This was done to
prevent QXDM sessions from interferring with ASIA tests.
Any QPST client (including QXDM) that has locked a target port
will effectively block QXDM from using the target until the
port is unlocked. To resolve connection problems, run QPST
Configuration (Start->Programs->QPST) and verify that other QPST
clients are not running.
1)
2)
3)
4)
Honor client-initiated QPST locks on target ports.

Add Data Protocol Logging View.
Include the DB Editor User Guide (Start->Programs->QXDM)
New Automation Interface:
Add new automation COM interface documentation to the User Guide.
Add IQXD2 CopyClientItems() method.
5) Add database support for arrays specified by start/stop indices.
6) User DB enum additions and overrides are now accepted.
7) Remove active polling the target for the time-stamp packet.
8) Add Band and correct ARFCN translation for GPRS views.
9) Add new database access script functions:
WaitForItem
RequestItem
RequestNVItemRead
RequestNVItemWrite
10) Database Updates
NewDiag Entities:
(98) Extensible Parameter Retrieval
(32) Emulate Handset Keypress
(75,42,1) Data/DPL Reset
(75,42,2) Data/DPL Get Supported Interface Name IDs
(75,42,3) Data/DPL Get Interface Name Descriptions
(75,42,4) Data/DPL Set Interface Logging Request
(75,42,5) Data/DPL Get Supported Protocol IDs
New NV Items:
2506 Appendix 5 Preferences
Add SCCHD OTA support for broadcast protocol.
Corrections:
0x5231 GPRS Air Interface Summary
0x513C GSM BA List
2053 EVENT_T_HDR_CMD
2054 EVENT_T_HDR_CMD_IGNORED_STATE
2068 EVENT_T_HDR_OVHD_GET_CC
1)
2)
3)
4)
Database updates made after latest QXDM release can now be installed
internally using QXDBInstaller:
\\haagen\Tools\Installers\QXDM\QXDBInstaller.exe
Add IQXDM2 automation methods:
AddOTALogByString()
GetNamedItemFields()
Remove obsolete HTML views:
WCDMA NAS CS Connection Management
GSM 3G Settings
Database updates:
Add/Modify Logs:
"Known Log Items -> GSM -> EGPRS -> RLC"
0x5205 EGPRS Uplink RLC Header
0x5206 EGPRS Downlink RLC Header
0x5207 EGPRS RLC Uplink Statistics
0x5208 EGPRS RLC Downlink Statistics
0x5209 EGPRS RLC EPUAN
0x5211 EGPRS RLC EPDAN
"Known Log Items -> GSM -> EGPRS -> MAC"
0x522C EGPRS MAC EPUAN
0x522D EGPRS MAC EPDAN
"Known Log Items -> GSM -> Layer 1"
0x5087 GSM L1 NCell SCH Metrics V2
0x508E GSM MDSP Scaling Factors
Add NV Items:
1992-2505
Add Subsystem Request/Responses:
8,5 GSM/GPRS Log Packet Response
12,2 REX/Task Profile Request
12,2 REX/Task Profile Response
Add Message Levels to SSID 31 Digital TV:
5 Digital TV/PSI
6 Digital TV/SI
7 Digital TV/PES
8 Digital TV/Module Driver
9 Digital TV/TSP I/F
10 Digital TV/Debug
11 Digital TV/Statistics
12 Digital TV/Engine
13 Digital TV/DTV Task

0x1157 Per-task Profiling
0x51FC GPRS GRR Cell Reselection Measurements
0x7133 UMTS NAS CS Connection Management Call Setup
Correct enumerations for Events:
Add MSM Revisions
1)
2)
3)
4)
5)
6)
Replace HTML views with Dynamic Item view solution and clean up:
Active Set Information
Fast Forward Power Control
GPRS MAC Parameters
GSM NCELL Info
GSM PSCAN Info
Retrievable Parameters
Quick Paging Channel
Searcher and Finger Information
Obsolete Status
WCDMA MAC Channel Mapping
Enable Windows XP (and beyond) theme support in all QXDM HTML based views.
Implement ClientConfigureByNames() IQXDM2 automation method.
Add RequestItem()/RemoveRequest() IQXDM2 automation methods for those who
just want to schedule/remove a request without a client being involved.
Correct registration problem for various HTML views where responses were
not being displayed (Fixes HDR Pilot Sets and HDR Fingers views).
Database updates:
Add Log to "Known Log Items -> Common -> REX"
0x1156 System-level Task Profiling
0x1157 Per-task Profiling
Add Logs to "Known Log Items -> UMTS -> AMR/SIM":
0x1271 Multimode Generic SIM Driver Interface
0x1272 Generic SIM Toolkit Task
Add Log to "Known Log Items -> WCDMA":
0x4213 WCDMA MAC HS Reset
59 Test Mode Command
Add Event:
1074 EVENT_MAC_HS_T1_EXPIRY
Add new Events to "Known Events -> CDMA 1X"
1075 Event Asynchronous DS707
1076 Event Packet DS707
Add Log definition:
0x1158 Internal - Core Dump
0x1157 Per-Task Profiling
0x525B GSM RR 3G Measurement Report

1)
2)
3)
Add Listen-only QXDM support, accessible from the Start->Programs QXDM menu.
WCDMA AGC display:
Change Radio Bearer Rate units to kbps instead of 100bps
Move CM Indication from its own plot to join SIR Estimate plot
Move client extensions to the QXDM\Extensions folder:
getGPSOneFiles.exe
4)
getLCSClient.exe
XQCAT.dll
Database updates:
Add Log to "Known Log Items -> Common -> Power Control":
0x10C2 Fast Forward Power Control Statistics
Add Logs to "Known Log Items -> WCDMA -> Layer 2 -> MAC & RLC":
0x4200 WCDMA HSDPA Configuration
0x4201 WCDMA HSDPA UL Beta Gain Table
0x4202 WCDMA Finger TA - HS Information
0x4203 WCDMA HSDPA Demodulator Control Table
0x4204 WCDMA HSDPA Modulator Control Table
0x4206 WCDMA HS Decode Status - Data
0x4207 WCDMA HS-SCCH Statistics
0x4208 WCDMA HS-DSCH HARQ Statistics
0x4209 Internal - WCDMA HS CQI Statistics
0x420A WCDMA UL HS DPCCH Information
0x420B Internal - WCDMA UL HS DPCCH Debug
0x4210 WCDMA MAC HS Configuration
0x4211 WCDMA MAC HS Headers
0x4212 WCDMA MAC HS Status
0x4770 WCDMA DL TFCI Status
Add Message Level:
1005 GPS Searcher Debug/Custom
Add Subsystem Disptach Command Requests/Responses:
37,6 Debug/Get Trace Info Request
37,7 Debug/Get Trace Item Range Request
37,8 Debug/Get Trace Item Request
37,6 Debug/Get Trace Info Response
37,7 Debug/Get Trace Item Range Response
37,8 Debug/Get Trace Item Response
Correct Susbsystem Dispatch Command definitions:
30,0 CDMA 1x Call Processing/Dynamic Feature Verify
30,1 CDMA 1x Call Processing/Dynamic Feature Query
Correct Log definition: 0x5263 GPRS RR 3G Reselection Measurements
Correct NV Item definition: 933 nv_df_i

Major Pre-Release:
Note: This build contains several new features and enhancements.
1)
2)
3)
4)
5)
6)
Provide new IQXDM2 COM Automation extenstions.

Change default DB path from QXDM\Property\QXDM to QXDM\Database
Database enhancements:
Improve database error reporting.
Support multiple DIAG entity entries per key.
Add support for user databases. Databases contained in folders
located in the default Database folder are also loaded.
Add XQCAT dynamic DM parsing DLL (uses QCAT automation to parse logs)
Update Static Status Display (F9) to show both legacy and extended
BuildID (v2) packet Model and Version Directory fields.
GSM GPRS Air Interface Summary View Enhancements:
Rename to "GSM GPRS Air Interface Summary"
Add information from Logs:
0x5076 GSM L1 TxLev TA
0x513A GSM RR SACCH Report
0x51FC GSM RR Cell Reselection Measure
0x5228 GPRS MAC UL TBF Establish
0x5229 GPRS MAC UL TBF Release
0x522A GPRS MAC DL TBF Establish
0x522B GPRS MAC DL TBF Release
7)
8)
9)
10)
11)
12)
13)
Add context menu graph selection

Add new GSM GPRS views:
GSM GPRS Information
GSM 2G/3G Serving and Neighbor Cell Information
GPRS PSI 1-2-3
Update and reaname 'GPRS Neighboring Cell Information' view to
'GPRS 2G/3G Combined Neighboring Cell Information' view.
Update views with support for Logs 0x4133, 0x4132, 0x4139:
WCDMA RLC AM Channel Stats
WCDMA RLC DL AM Channel Parameters
WCDMA RLC UL AM Channel Parameters
Add gpsOne lowModeSA.txt fix to getGpsOneFiles.
Restrict task names in Profiling display to maximum of 12 characters.
Database updates:
Add Logs:
0x1270 WMS Message List
0x4715 WCDMA L1 UL TFC Power Limiting
0x51FE GPRS Packet System Information 2
0x5205 GPRS Uplink RLC Header
0x5206 GPRS Downlink RLC Header
0x520F GPRS UL AckNack Parameters
0x5210 GPRS DL AckNack Parameters
Correct definitions for Dynamic Feature Query/Verify packets:
30,0 CDMA 1x Call Processing/Dynamic Feature Verify Request
30,1 CDMA 1x Call Processing/Dynamic Feature Query Response
QXDM Database Server Changes:
Replace QDatabase with new QXDB QXDM database server.
Remove QDatabase from QXDM installation.
No longer update Qualcomm\Shared folder with QXDM DB files.

1)
Database updates:
Add Event Category: "Essential For Post-Processing Tools"
Add Log Category: "DV Information"
Add Events:
1072 Event PPP NETMODEL
1073 Event Camera Profiling
Add Logs to "Known Log Items -> Common -> AMPS/IS95/IS2000 -> Searcher ->
Dev" Category:
0x119A Srch TNG Finger Status
0x119B Srch TNG 1x Searcher Dump
0x119C Srch TNG General Status
0x119D Srch TNG Demod Status
0x119E Srch TNG Sleep Statisitics
0x119F Srch TNG Quick Paging Channel Info
0x11A0 Srch TNG AFC Info
0x11AF Search Finger Driver Dump
Add Logs to "Known Log Items -> Common -> AMPS/IS95/IS2000" Category:
0x1256 F-CPCCH Quality Information
0x1257 Reverse PDCCH - PDCH Frame Information
0x1258 Forward G Channel Information
0x1259 Forward G Channel Frame Information
0x125A Forward RC Channel Information
0x125B Forward ACK Channel Information
0x125C Forward ACK Channel ACKDA Information
0x125D Reverse REQ Channel Information
Add Logs to "Known Log Items -> Common -> DV Information" Category:
0x117A DV Information Enabled
0x1266 PDCCH LO Selected
0x1267 PDCCH HI Selected

0x1268 Walsh Selected
0x1269 PDCH BE Selected
0x126A PDCCH LLR Selected
0x126B CQI-ACK LO Selected
0x126C CQI-ACK HI Selected
0x126D RL-GAIN Selected
0x126E PDCCH0-SNDA Selected
0x126F PDCCH1-SNDA Selected
Add Logs to "Known Log Items -> Common" Category:
0x125E Sleep Task Statistics
0x125F 1x Sleep Controller Statistics
0x1260 HDR Sleep Controller Statistics
0x1261 GSM Sleep Controller Statistics
0x1262 WCDMA Sleep Controller Statistics
0x1263 Sleep Statistics Reserved1
Add Debug Message SSID 32 TCXO Manager
Correct NV Item names:
1940 AAGPS MT LR Support
1960 AAGPS 3G MO LR Support
Correct enums for Events:
329 HDR MSG RX
2051 EVENT_T_HDR_TXMSG_FAILED
2052 EVENT_T_HDR_TXMSG_ABORTED
Correct name for model 198 to FFA6250_GWZRF6250.
1)
2)
3)
4)
5)
6)
7)
Add CDMA 1xEV-DO OTA log support.

Improve layout of AAGPS views.
Memory Viewer:
Change default values displayed from 0x66 to 0xFF.
No longer poke bytes to row 0 address when Enter is pressed.
Silk Server:
Upgrade to SILK version 8.34.
Add CDMA 1xEV-DO OTA support.
DB Editor changes:
Add search, sort and display features.
User Guide changes:
Add NV Browser and Dynamic Item View descriptions.
Update descriptions for context-sensitive help, launching
remote sessions, runtime parsers, and automation commands.
Database updates:
Migrate property files to database.
Relocate CDMA 1xEV-DO Logs to OTA log code tables:
0x1076-0x1079, 0x107C
Relocate Logs to WCDMA Obsolete category:
0x4149, 0x4151, 0x4152, 0x411C, 0x4122, 0x4158, 0x4159
621 EVENT_SD_EVENT_ACTION
622 EVENT_SD_EVENT_ACTION_HYBR
1034 GPS PDSM Event Report
1049 EVENT_HDR_AMAC_PERSISTENCE_FAILED
1050 EVENT_HDR_AMAC_PERSISTENCE_PASSED
Relocate NV Item to Display category: 174 SMS.
1220, 1221, 1223, 1224, 1227, 1228, 1230-1233, 1242, 1925

Add Logs:
0x1250 GPS Demodulation Tracking Header
0x1251 GPS Demodulation Tracking Results
0x1252 GPS Demodulation Bit Edge
0x1253 GPS Demodulation Soft Decisions
0x1254 GPS Post-Processed Demodulation Tracking Results
0x1255 GPS Demodulation Subframe
0x5088 GSM L1 Transmit Burst Metrics
Add Event:
1071 Location Service Based Mobile Originated Location Registration
Confirmation
Add NV Items:
1977 Brew Carrier ID
1978 Brew Platform ID
1979 Brew Bkey
1980 Brew Server
1981 Brew Download Flags
1982 Brew Authentication Policy
1983 Brew Privacy Policy
1984 Brew Subscriber ID
1985 WCDMA RX Path Delay - 2100
1988 AAGPS Development Test Control 2
30,2 CDMA 1x Call Processing/MC Log State Request
30,3 CDMA 1x Call Processing/Paging Message Error Rate Statistics Request
30,3 CDMA 1x Call Processing/Paging Message Error Rate Statistics
Response
Add Debug Message SSIDs:
30 Media Forward Link Only
31 Digital TV
1)
2)
3)
4)
5)
NV Browser changes:
Add category filter for NV Browser.
Resizing now modifies both panes.
Automation changes:
Remove obsolete automation interfaces.
Add type library to installation.
Modify dynamic parsing for Broadcast Multicast Services:
0x117F LOG_1XEVDO_MULTICAST_PACKET_RATE_METRICS
0x1180 LOG_1XEVDO_MULTICAST_PHYSICAL_CHANNEL_METRICS
0x1182 LOG_1XEVDO_MULTICAST_LOGICAL_CHANNEL_METRICS
DB Editor changes:
DB Editor now reopens last used db, over multiple sessions.
Change import wizard to display both original and remapped id values.
DB Editor now allows empty struct names.
Database updates:
Add support for memory peek/poke DIAG commands.
Rename Log Items:
0x411C Obsolete - WCDMA RLC UL AM Configuration
0x4122 Obsolete - WCDMA RLC DL AM Configuration
0x4133 WCDMA RLC UL AM Configuration
0x4139 WCDMA RLC UL AM Statistics
0x4144 Obsolete - WCDMA RLC DL AM PDU
0x4149
0x414B
0x4151
0x4152
0x4158
0x4159
0x4161
0x4162
0x4168
0x4169
Obsolete - WCDMA RLC UL AM Statistics

Obsolete - WCDMA RLC UL AM PDU
Obsolete - WCDMA RLC UL Ciphering
Obsolete - WCDMA RLC DL Ciphering
Obsolete - WCDMA Downlink RLC Cipher PDU Configuration
Obsolete - WCDMA Uplink RLC Cipher PDU Configuration
WCDMA RLC UL Ciphering
WCDMA RLC DL Ciphering
WCDMA Downlink RLC Cipher PDU Configuration
WCDMA Uplink RLC Cipher PDU Configuration

1)
2)
3)
4)
5)
6)
Add Mobile Equipment Identifier to Status (Static) display

Add Dynamic Item View
All checkbox lists now support a context menu (right click)
with check/uncheck all menu items
Add dynamic parsing for Broadcast Multicast Services:
0x117F LOG_1XEVDO_MULTICAST_PACKET_RATE_METRICS
0x1180 LOG_1XEVDO_MULTICAST_PHYSICAL_CHANNEL_METRICS
0x1181 LOG_1XEVDO_MULTICAST_ECB_STATUS
0x1182 LOG_1XEVDO_MULTICAST_LOGICAL_CHANNEL_METRICS
DB Editor changes:
Add file history list
Update Conventions.h document
Database updates:
Add NV Items:
1941 ipv6_failover_config
1942 uim_use_cave_for_an_auth
1944 gps1_call_related
1945 rf_antsel_gsm_default
1946 rf_antsel_gsm_850_tx
1947 rf_antsel_gsm_850_rx
1954 rf_antsel_umts_800
1957 tcp_sack_timestamp_enabled
1958 prl_pref
1959 aagps_default_ip_port
1960 aagps_3g_mo_lrsupport
1961 aagps_development_test_control
1962 diag_debug_max_files
1963 wcdma_800_pa_compensate_up
1964 wcdma_800_pa_compensate_down
1965 wcdma_1900_pa_compensate_up
1966 wcdma_1900_pa_compensate_down
1967 wcdma_800_pa_gain_up_time
1968 wcdma_800_pa_gain_down_time
1969 wcdma_1900_pa_gain_up_time
1970 wcdma_1900_pa_gain_down_time
1971 wcdma_tx_cal_chan
1972 wcdma_rx_cal_chan
1973 wcdma_1900_tx_cal_chan
1974 wcdma_1900_rx_cal_chan
1975 wcdma_800_tx_cal_chan
1976 wcdma_800_rx_cal_chan
Change NV Item definitons:

5
slot_cycle_index
443 gps1_gps_rf_delay
444 gps1_cdma_rf_delay
938 neg_slot_cycle_index
1206 ppp_config_data
1)
2)
3)
Fix logging for OTA logs (broken in previous product release).

Recognize MSM6250 revisions 1.0, 1.1, 2.0, and 2.1.
QXDM GPS server now works with DeLorme EarthMate GPS receiver.

1)
2)
3)
4)
5)
6)
Add support for debug trace dump version 3:

Debug Trace View
Multiple trace dump file support
Full-format debug messages, events, logs
Add support for target enabled event masks.
NV Browser changes:
Columns can now be reordered by dragging column headers.
NV items are no longer automatically read when selected.
Change 'Refresh' button to 'Read' button.
Filtered Views now optionally accept unknown items. Added
"Accept Unknowns" checkbox to configuration dialog.
Add log on demand for GSM serving cell info log in Dynamic
Status view.
Database updates:
Partial names are now displayed in parsed database output.
Add 1007/23 Searcher/EV-DV message level
Update Log names:
0x11E9 GPS MS-MPC Forward Link
0x11EA GPS MS-MPC Reverse Link
0x4134 WCDMA DL AM Data PDU
0x4135 WCDMA DL AM Signaling PDU
0x413B WCDMA UL AM Data PDU
0x413C WCDMA UL AM Signaling PDU
0x4144 Obsolete - WCDMA RLC DL AM PDU
0x4145 Obsolete - WCDMA RLC UL AM PDU
0x7143 UMTS Tx Vocoder Frame Version 2
0x7144 UMTS Rx Vocoder Frame Version 2
Change NV Item names:
1908 wcdma_prach_r1_rise_offset
1909 wcdma_1900_prach_r1_rise_offset
1910 wcdma_prach_r1_fall_offset
1911 wcdma_1900_prach_r1_fall_offset
1912 wcdma_800_prach_r1_fall_offset
1931 wcdma_800_prach_r1_rise_offset
Add NV items:
1943 Mobile Equipment Identifier
Add events:
1049 EVENT_HDR_AMAC_PERSISTENCE_FAILED
1050 EVENT_HDR_AMAC_PERSISTENCE_PASSED

1)
Database updates:
Update enumeration text for 1xEvDo protocol changes
2)
Add enumeration text for EVENT_SM_PDP_STATE (971).

Correct payload description for EVENT_QTV_CLIP_STARTED (904).
Add descriptions for subsystem IDs 35-42:
DIAG_SUBSYS_USB
DIAG_SUBSYS_PM
DIAG_SUBSYS_DEBUG
DIAG_SUBSYS_QTV
DIAG_SUBSYS_CLKRGM
DIAG_SUBSYS_DEVICES
DIAG_SUBSYS_WLAN
DIAG_SUBSYS_DATA
Add dynamic parsing support for WCDMA Cell Information
LOG_WCDMA_CM_INTERFREQUENCY_LIST (0x4156)
LOG_WCDMA_LIST_SEARCH (0x414F)

1)
2)
3)
4)
5)
6)
Add initial subsystem dispatch V2 support (delayed response).

Add support for resizing views such as the NV Browser.
Add Windows property settings scalable font support.
Database updates:
Add NV item definitions 1904-1940.
Add Decoder DSP message level for QTV subsystem.
Correct event 395 SOFT_HANDOFF_V2 definition.
Add models:
206 QUASAR6700-PLT-BB-IQ
207 QUASAR6700-PLT-BB-Y-ZRF6500
208 QUASAR6700-BB-IQ
209 QUASAR6700-BB-Y-ZRF6500
215 HIDRA6700-ZRF6500
Include DBEditor 01.00.05 and ItemTester.
Debug trace dump version 2 support removed.

1) Correct NV item definitions hdrscp_protocol_subtype (477), and
Dynamic Feature (933).
2) Include HDR Broadcast-related subsystem dispatch command properties.
1) Replace obsolete NV Items view with NV Browser view.
a) Edit values by clicking on the value field.
b) Sort by Name, ID, and Category by clicking on a column
header.
2) Modify trace dump sample scripts to only retrieve debug traces when
a trace dump file is present and supported by the phone.
Add new Events:
1037 GSDI Activate Feature Indication
1038 GSDI Deactivate Feature Indication
1039 GSDI Get Feature Indication
1040 GSDI Set Feature Data
1041 GSDI Unblock Feature Indication
1042 GSDI Get Control Key
1043 GSDI Over the Air DE Personalization
1044 GSDI Get Permanent Feature Indication
1045 GSDI Permanent Disable Feature Indication
Correct definition for Long Code Mask Changed event (1035).
2)
3)
4)
5)
Add Message Levels for SSID 6005 To 6010 (QVP).

Add support for version 1.0 DF Query Subsytem command fields.
Add mobile models:
198 SURF6250_GWZRF6250
199 SURF6025_ZRF6122
203 SURF6550_ZRF6500_R
204 FFA6550A_ZRF6500_N16
205 FFA6550B_ZRF6500_N16
210 QUASAR6700-ZRF6500
211 SURF6550_ZRF6500_N16
212 SURF6550_ZRF6500_N8
213 FFA6550_ZRF6500_N16
Add CM Indication plot to the WCDMA AGC display.
Script command "logging on" now waits for the logging view to
actually come up before exiting.
Preserve the 'Date Modified' file timestamp for item store files
that are opened and subsequently closed without actually having had
any items added to them.
Close message/log views in advance of loading config file to avoid
config overwrites.

1) Add 'Sync Near Item' command to sync views to the nearest item when
an exact item match is not available.
2) Timestamp column now displays '(PC)' when item specific timestamps
are not being displayed.
Add event 1035 Long Code Mask Changed
Rename MMGPS logs, messages, and views to AAGPS (Asynchronous
Assisted GPS).
Add Message Level for SSID 7000 (WinCE).
4) Add support for debug trace dump version 2.
1)
2)
3)
Add debug message SSID names:

23 Factory Test Mode
24 Multi-mode Global Positioning System
25 Sleep
26 System Arbitration Module
27 Shared Resource Manager
28 SanDisk FAT Filesystem
Add new log names:
0x116F
Client Response
0x1170
Header Only
0x1171
Entire Packet
0x1172
Audio Samples
0x1173
Video Samples
0x117F
1xEV-DO Multicast Packet Rate Metrics
0x1180
1xEV-DO Multicast Physical Channel Metrics
0x1181
1xEV-DO Multicast ECB Status
0x1182
1xEV-DO Multicast Logical Channel Metrics
0x11B0
QTV Text Samples
0x11B1
QTV Player Timed Text
0x11B2
QTV Frame Decode Information
0x11B3
QTV Frame Render Information
0x4160
WCDMA RACH Parameters
Add PPPExtractor and DLFConverter to Tools menu list.

1) Rearrange Searcher messages and logs into Searcher and Debug categories.
2) Update log names:
0x1183 - HDR Debug Display
0x490A - H324 Video Statistics
0x490D - H324 Uplink Audio Sequence Number Time Stamp
0x490E - H324 Downlink Audio Sequence Number Time Stamp
0x490F - H324 Uplink Video Time Stamp
0x4910 - H324 Downlink Video Time Stamp
3) Correct enumeration text for event #1024, EVENT_PLMN_INFORMATION.
4) Correct NV definition for NV item #946, nv_band_pref_16_31_i.
5) Upgrade to SILK version 8.30.0 and utilize SILK error messages.
1)
2)
3)
Update Event 1022, 1023, and 1024 payloads (AST approved).

Add new Event 1034 PDSM Event Report
Add new Log names:
0x11E1 PDSM Position Report Callback
0x11E2 PDSM PD Event Callback
0x11E3 PDSM PA Event Callback
0x11E4 PDSM Notify Verify Request
0x11E5 PDSM Reserved 1
0x11E6 PDSM Reserved 2
0x11E7 Search Demodulation Status
0x11E8 Search Call Statistics
0x490D H324 Uplink Audio Transfer Sequence
0x490E H324 Downlink Audio Transfer Sequence
0x490F H324 Uplink Video Identifier Transfer Sequence
0x4910 H324 Downlink Video Identifier Transfer Sequence
4)
5)
Update GPS items to show item specific time and full parsed text.
Provide RelA 32x support in Simple Test Data Services view.

1)
2)
3)
4)
5)
6)
Automation updates:
Get/Set of 'COMPort' to 0 now equates to 'Disconnected'.
Add ExportViewText, CopyViewItems, and ClearViewItems commands.
Refer to ItemListViewCommands.pl in Automation installation folder
sample script for usage.
Add core support for full parsed text.
Improve window tiling feature.
Add View tagging feature accessible from the Window->Tag Window menu.
Copy Items versus Export Items Clarification:
Export refers to generating text from the contents of a scrolling
view. Copying refers to either copying resulting text to the
clipboard (i.e. standard Windows copy command) or copying the binary
items to a new item store file.
a. Add 'Copy Items' and 'Copy All Items' commands to copy items
from scrolling views to an item store file (access using context
menu).
b. Rename copy text commands:
'Copy All to File' to 'Export All Text'
'Copy to File' to 'Export Text'
'Copy to Clipboard' to 'Copy Text'
Add technology names to Data Services and 1xEv-DO debug message
levels.
Product Release:
NOTE:
Includes updates since last product release (03.00.20).
Substantial changes have been made to the user interface

and core libraries since version 03.05.00. The QXDM User's
Guide that ships with QXDM has been updated to reflect these
changes.

1)
2)
3)
4)
5)
6)
7)
8)
9)
Add support for single antenna data to Enhanced Finger runtime

parser.
Rename 3G views to "GSM 3G" and add log GSM RR 3G Measurement
Report (0x525B) support.
Add User-configurable CDMA Protocol Revision support via
the Options->Settings dialog.
Database Updates:
Add new Message Categories and Levels:
5014 BroadCast MultiCast Services/Low-Fatal
5015 Multi Radio Link Protocol/Low-Fatal
6003 QTV Applications/Text Task
Correct reversed (old/new) EcIo field references for events:
EVENT_IDLE_HANDOFF
EVENT_ACCESS_HANDOFF
EVENT_ACCESS_PROBE_HANDOFF
EVENT_ACCESS_ENTRY_HANDOFF
Update Log names/categories:
(0x117D) Internal - GPS Simplified Multipeak, Version 2
(0x117E) Internal - GPS Verbose Multipeak, Version 2
(0x10DA) GPS/Internal - GPS Bit Edge Results
Dynamic parsing DLL information now maps correctly to parser.
Scrolling indicator now updates when view is maximized.
Update System Profile log definition for Profiling view.
Improve detection of QPST connection events.
Add support for debug trace dump version 1.

1)
2)
3)
4)
5)
6)
7)
Add scrolling activity indicator to scrolling View title bars.

Update QXDM User's Guide:
a) Sections 1.1 Purpose and 1.2 Scope (corrections)
b) Section 2.1 Required Hardware and Software (corrections)
c) Section 2.4 Overview (new section/sub-sections)
Database updates:
Add Event definitions:
306 EVENT_FFCH_ACQUIRED
307 EVENT_FDCCH_ACQUIRED
308 EVENT_FFCH_PLUS_DCCH_ACQUIRED
970 Short Message Service Statistics (AST approved change)
1033 CB Short Message Service Notify
Change event names and payload definitions (AST approved):
1016 EVENT_QVP_APP_PROCESS_EVENT
1017 EVENT_QVP_APP_STATE_CHANGED_EVENT
1018 EVENT_QVP_APP_CALL_CONNECTED_EVENT
Add Log names and categories:
0x513C: GSM->Layer 3->GSM RR BA List
Update MSM hardware names for 6500 chipset.
Combine Mux1, Mux2, and Paging/Access stats into the
IS-95A Retrievable Parameters View.
Improve efficiency of Copy All to File feature.
Correct PN offset parsing for Searcher Finger run-time parser.
8)
PPPExtractor no longer writes out empty or incomplete frames.

Handle the case where end flag of one frame does double duty
as the start flag of the next frame.
9) Required diagnostic log packets are now re-polled when logging
starts.
10) Annotations are now correctly handled by ISFConverter.
11) Add multi-instance automation server support. By default, QXDM
is configured as a single-instance server. Configure from the
cmd shell:
qxdm -RegServer /MultiInstance
or
qxdm -RegServer /SingleInstance

1)
Update QXDM User's Guide.
2)
Add PPP Logging utility, PPPExtractor accessable from from QXDM's

Start-Programs menu. PPPExtractor extracts the following PPP log
packets from an Item Store file into separate RFC 1662 compatible
frame data dump files:
(0x109D/0x109C) Legacy
(0x1113/0x1123) UM Interface Framed
(0x1114/0x1124) RM Interface Framed
(0x1115/0x1125) AN Interface Framed
Note: If the logs are in a log file, first use DLFConverter to
convert .DLF files to .ISF file format.
3)
Display TPC Index in WCDMA Temporal Analyzer view.
4)
Database updates:
Add new Log:
0x1199 Mobile IP Performance
5)
WCDMA Physical Channels and L1 displays no longer generate

GetProperty errors.

1)
View Behavioral Changes

Introduce Filtered Views architecture supporting unlimited view
configurations. For legacy reasons, the (F3) Message and (F1)
Logging views are preserved as special case filtered views:
Message and Logging views now
and unregister configurations
only what is received for the
continues to show all traffic
QXDM session.)
register configurations when created

when destroyed. Each view displays
life of the view. (The Item View
received from the target during the
Logging View Behavior:

a) The Logging View is created when logging is started (Alt+L) and
destroyed when logging is stopped.
b) Logging is started when the Logging view is created (F1) and
stopped when the Logging view is destroyed.
c) Logging View shows only what is being logged.
d) Logging Configuration settings are sent to the target only when
logging is started.
e) Logging Configuration settings are removed from the target when

logging is stopped.
f) Logging occurs only when connected.
g) A new log file is created on each phone (re)connection if
"Restart Logging on Disconnect" from Options-Settings is checked.
h) The 4 digit MIN is no longer included in the log file name.
2)
3)
Messages View Behavior:

a) Message View shows only the traffic received during the life of the
view.
b) Message Configuration settings are communicated to the target only
when the (F3) Messages View is created.
c) Message Configuration settings are removed from the target when the
view is destroyed.
No longer install obsolete QXDM.qdb database.
Database updates:
Add Subsystem Dispatch command ID 36 for QTV.
Add log names for QVP logs:
0x490A LOG_H324_VID_STAT
0x490B LOG_H324_VID_ENCODER
0x490C LOG_H324_VID_DECODER
933 EVENT_QTV_PARSER_STATE_READY
934 EVENT_QTV_FRAGMENT_PLAYBACK_BEGIN
935 EVENT_QTV_FRAGMENT_PLAYBACK_COMPLETE
936 EVENT_QTV_PARSER_STATE_PSEUDO_PAUSE
937 EVENT_QTV_PLAYER_STATE_PSEUDO_PAUSE
938 EVENT_QTV_PARSER_STATE_PSEUDO_RESUME
939 EVENT_QTV_PLAYER_STATE_PSEUDO_RESUME
1032 EVENT_QVP_CALL_RELEASED
Add Bluetooth log structures
Add WCDMA TA3 structure
Add Dynamic Feature Query structure

1)
2)
3)
Database updates:
Add log names:
0x1198 MPEG4 Clip Statistics Version 3
0x6000 Atlantis NI Start Parameters TSn3
0x6001 Atlantis NI MLP LIR TSn4
0x6002 Atlantis NI MLP LIA TSn5
0x6003 Atlantis NI Per Attempt Statistics TSn5
0x6004 Atlantis NI Final Statistics TSn6
0x6005 Atlantis NI Test Completion Notification TSn7
0x6014 Atlantis WAP Based Start Parameters TSw3
0x6015 Atlantis WAP Based MLP LIR TSw4
0x6016 Atlantis WAP Based Trigger Of LBS TSw5
0x6017 Atlantis WAP Based MLP LIA TSw6
0x6018 Atlantis WAP Based Trigger Of LBS TSw7
0x6019 Atlantis WAP Based Per Attempt Statistics TSw8
0x601A Atlantis WAP Based Final Statistics TSw8
0x601B Atlantis WAP Based Test Completion Notification TSw9
Remove wait_event 500ms look back feature (introduced in 03.00.19).
Remove obsolete or invalid views:
Security Services SSL Sessions
WCDMA Transport Channels
GPS Statistics
1)
2)
Add Events:
929 PS Download Started
930 Pseudo Stream Started
931 PS Player State Pseudo Pause
932 PS Player State Pseudo Resume
1028 VCTCXO Freeze
1029 VCTCXO Unfreeze
1031 QVP Received First Video Frame
Fix automation WaitEvent(), broken since 3014:
a. Returned success on "any" event.
b. Occasionally failed to recognize timeout.

1)
Database description changes:

Add Events:
Add 1027 EVENT_HARD_HANDOFF_LONG_CODE_MASK_CHANGE
Add 1030 EVENT_SMS_SLOT_WAKEUP_V2
Correct Log names:
0x411C WCDMA RLC UL AM Configuration
0x4145 WCDMA RLC UL AM Control PDU
0x4146 WCDMA RLC DL AM Control PDU

1)
2)
3)
4)
5)
6)
7)
8)
9)
Replace GPRS Neighbor Cell display with 2G Neighbor Cell.

Add 3G Neighbor Cell display.
Add 3G Settings display.
Add 3G Reject Database display.
Modified parm_get script command to support additional 0.5x DV
statistics fields.
Modified DV statistics for additional 0.5x rates.
Update QDatabase to version 2.0.0.4 (fixes parsing problem with
Soft Handoff V2 event)
Database description changes:
Logs:
0x1194 RLP RX PDCH Partial MUXPDU5 Frames
0x1195 RLP TX PDCH Partial MUXPDU5 Frames
0x1196 RLP RX Internal Details
0x1197 RLP TX Internal Details
0x5237 GPRS TX Schedule Results
0x507C GSM AFC Adjust
Messages:
SSID 27 message category, Shared Resource Manager.
Events:
Fix unpacked definition for MIP event.
Also parse legacy (pn_offset only) event definitions:
EVENT_IDLE_HANDOFF
EVENT_ACCESS_HANDOFF
EVENT_ACCESS_PROBE_HANDOFF
EVENT_ACCESS_ENTRY_HANDOFF

1)
2)
Add DV Statistics support to MUX Statistics display.

Add DV parameter support to parm_get command:
parm_get FPDCH0
parm_get FPDCH1
3)
parm_get FPDCCH0
parm_get FPDCCH1
Add NV Items display support for items through item 1803.

1)
2)
3)
4)
5)
6)
7)
8)
9)
Add Log Names:

(0x507A) GSM/L1 Serving Auxiliary Measurements
(0x507B) GSM/L1 Neighbor Cell Auxiliary Measurements
(0x5251) GPRS/L1 DLPTCCH Burst Metrics
(0x5252) GPRS/L1 DLPTCCH Message Metrics
(0x5262) GPRS/RR 3G Measurement Parameter
(0x5263) GPRS/RR 3G Reselection Measurements
911 QTV Clip Rotate
970 SMS Statistics
971 SM PDP State
972 MVS State
1016 UMTS QVP Application State
1017 UMTS QVP Application State Changed Event
1018 UMTS QVP Application Call Connected Event
1019 Event GSDI Card Event Notification
1020 CM Data Available
1021 CM DS Interrat State
Correct payload for RLC MRW event (1015) and correct payload
for event 976 DIAG table name to EVENT_SECCRYPT.
Update phone model and HW Revision names:
192 FFA6025-ZRF6122
195 SURF6500_JIZRF_R
196 SURF6500_JIZRF_N
197 FFA6500_JIZRF_N
0xF021 5500 UMC Rev 1.0
0xF025 5500 Rev 2.0
0xF026 5500 UMC Rev 2.0
0xF030 6100 TSMC Rev 1.0
0xF053 6050 TSMC Rev 2.3
0xF120 5500 IBM R1.1
0xF121 5500 UMC R1.1
0xF130 6100 TSMC R1.1
0xF150 6050 Rev Unknown
0xF190 6300 TSMC Rev 1.1
0x003C 6500 TSMC Rev 1.04) Add SAM and Data Services SSID levels.
Add Message SSID Levels:
26
System Arbitration Module
5001 Radio Link Protocol
5002 PPP
5003 TCPIP
5004 IS 707
5005 3G Manager
5006 Protocol Services
5007 Mobile IP
5008 UMTS
5009 GPRS
5010 GSM
5011 Sockets
5012 AT Command Parser
5013 Serial IO
"Save All To File" remembers legacy message format again.
Text search now works on every selected column.
Constant array fragments are now parsed.
Update Debug Message descriptions:
Correct FTM/Error.
Move HDR Subsystem IDs to HDR 1xEv DO category.

10) Correct definition of NV Item NV_EQUIVALENT_PLMN_LIST_I (#853).
QXDM Database Editor:
1) Add support for optional fragment type.
2) Add support for manually entering Struct and Format Specifier IDs.
3) Fix various bugs with hex numbers in enum entry dialogs.
4) Duplicate field name error now occurs only if it causes an ambiguity
in the Format Specifier.
1)
2)
3)
4)
5)
Add event descriptions:

658 EVENT_BREW_MEDIAPLAYER_SELECT_FILE
659 EVENT_BREW_MEDIAPLAYER_CONTROL
928 EVENT_QTV_CLIP_FULLSCREEN
Add log names:
WCDMA/Layer1 Interfrequency Step1 Search
WCDMA/Layer1 Interfrequency List Search
GSM/Layer1 GL1 Hardware Command
Correct payload for WCDMA RLC Reset event (1013).
Only update QDatabase if same or newer version.
Create Signal Information Display.

1)
2)
3)
4)
5)
6)
Playback Enhancements:
Add fractional playback speeds.
Replay dialog no longer exits when ESC key is pressed.
Disable Communications during playback.
Remember communication states across sessions.
Change %CPU in Profiling view to reflect instantaneous CPU usage.
Correct handling of timerID for updating items in views.
Correct GPS problems (broken since 3.0.00):
Replace QXGPSSvr with working copy.
No longer crash when saving log file while collecting GPS information.
Undo debug code that was fabricating GPS logs (broken in 3.0.12).
Add Windows 2000 service pack version checking to the installer.

1)
2)
3)
4)
5)
6)
Align columns in saved text output.

Search engine (Ctrl+F) now supports regular expressions.
Add missing 0x4005 UMTS Cell Reselection log item name to the database.
Correct QDatabase behavior on systems that do not have .NET system
files (broken in 03.00.11).
Update QGraph to correct Finger Placement display problems resulting from
unrecognized line type.
Fix UMTS Cell Reselection display support for 0x4005 log.

1)
2)
3)
Database updates:
Add WCDMA RAB_RATE_RECONFIG and RLC events (1012-1015).
Add numRetries to EVENT_GSDI_GET_PIN_STATUS payload.
Add log names for WCDMA RLC Cipher PDU Configuration.
Rename MSP equipment ID 6 to Location Based Services.
Modify Communications Dialog to display only valid ports.
Include Finger Placement Display with support for LOG_SRCH_FING_INFO_C
4)
5)
6)
7)
(0x102D) and LOG_ENH_FING_INFO_C (0x1179) logs.

QDatabase now utilizes the core library.
OTA Item selections for message and logging View are now persistant
across QXDM sessions.
Logging Annotation works again (was broken since version 3.0.00).
Rearrange asynchronous handlers to reduce the liklihood of incoming
data being dropped.

1)
Enhance support for (F5) Logging and (Ctrl+F5) Message View Congfiguration
dialogs:
a)
b)
c)
d)
e)
2)
All items can be multiply nested in sub-categories.

Items can belong to multiple categories (e.g. select items by level).
Unknown (discovered) items are now stored in a "Discovered" folder.
Log mask by equipment ID is now reflected immediately in tree control.
Allow user to explicitely select which equipment ID log mask to update.
QXDM Database Editor now supports editing of items and categories as viewed
from the (F5) Logging and (Ctrl+F5) Message View Congfiguration dialogs.
NOTE:
Database files are overwritten during QXDM installation. Changes

that need to be permanent must be requested by sending email to
asw.diag.request@qualcomm.com.
3)
Include QXDMLite (internal use only) and DLFConverter tools.
4)
Provide summary text parsing for LOG_ENH_FING_INFO_C (0x1179) log.
5)
Add definitions for events 1009-1011.
6)
Correct definitions for the following events:

a) 509 and 510: Fix payload definition (incorrect offset).
b) Remove missing enum for event 441.
7)
Correct behavior of unknown items such that items that are unrecognized
are now displayed in views that have registered interest in at least one
item of the same type.
8)
Move obsolete UL/DL AckNack logs (0x520B, 0x520C) to Obsolete category.
9)
Add NV Items display support for items through item 1311.

1)
2)
Unidentified logs are now stored in "Not In Use" categories.

Add scripting support for mpc_remote_control. Syntax:
mpc_remote_control <hostname> <MIN>
NOTE: Refer to documentation provided with the MPC Call Flow Server for
usage information. QXDM expects the server to be listening on
port 4444.

1)
Add additional columns to scrolling views:

Split 'Item' content type into two columns:
Summary - Displays parsed summary output.
2)
3)
Payload - Displays raw payload.

Split 'Sub-Type' content type into two columns:
Key - Displays the numeric key value identifying the sub-type.
Name - Displays the name obtained from the core database.
Correct NV item rtsp_proxy_server_addr_alternate (942).
Database Changes:
Correct the following badly formatted events:
a) Replace a missing comma between the actual f.s. and the
arguments.
GPS_PPM_PAUSE (ID 579)
GPS_SRCH_EXCEPTION (ID 594)
b) Correct format specifier to display enumerated value.
CP_MATCHED_MSG (ID 513)
GPS_UAPDMS_STATE_CHANGE (ID 618)
WMS_SEARCH_REQUEST (ID 989)
c) Remove duplicate field.
WCDMA_NEW_REFERENCE_CELL (ID 399)
d) Correct format specifier for 4 byte fields to '%08X'.
SECSSL (ID 973)
SECTEST (ID 974)
SECVPN (ID 975)
SECCRYPT (ID 976)
SECCRYPT_CMD (ID 977)
e) Correct enumeration text.
EVENT_CM_RELEASE_USS_IND to display MN_SS_ERROR_TAG for value 5.
f) Correct EVENT_MIP to 8 byte payload; Add Dropped Bit enum.
Add enumeration text "Not Applicable" for

EVENT_WCDMA_TO_WCDMA_RESELECTION_END.
Add log name for RACH Parameters (0x4160).
Add log name for 0x525B, GSM RR 3G Measurement Report to GSM Layer 3
category.
Add "Not In Use" categories.
5) Properly display unknown events for logging and message views.
1)
2)
3)
4)
5)
6)
7)
Describe GSM AMR STATE CHANGE event payload.

Correct event ID for BREW_GENERIC to 657.
Correct payload descriptions for GSDI event IDs 1002 to 1006.
Add NV item descriptions 1191 through 1304.
Include runtime FTM support for HDR.
Show HDR Finger C/I's.
Add Log item names for log codes 0x1179-0x1193.

1)
2)
3)
UMTS offline response is correctly detected once again.

Remember scrolling view column choices and column widths between sessions.
Database Updates:
Event Updates:
Correct CDMA_EXIT event payload.
Add ARM client types for event 982.
EVENT_BREW_GENERIC
EVENT_GSDI_GET_FILE_ATTRIBUTES
EVENT_GSDI_SIM_READ
EVENT_GSDI_SIM_WRITE
EVENT_GSDI_GET_PIN_STATUS
EVENT_GSDI_VERIFY_PIN
EVENT_GSDI_UNBLOCK_PIN
EVENT_GSDI_DISABLE_PIN
EVENT_GSDI_ENABLE_PIN
EVENT_GSDI_SIM_INCREASE
EVENT_GSDI_EXECUTE_APDU_REQ
Message Names:
Add MM GPS SSID and default levels.
Add log names for HDR log codes:
LOG_HDR_ACQ_INFO
LOG_HDR_REACQ_INFO
LOG_HDR_SLEEP_INFO
1)
Include PLT RPC-like Proxy server application, accessable from QXDM's

Start-Programs menu.
2) Include Parsing DLL Wizard support. Files are located in the
...\Qualcomm\QXDM\Parsing DLL Wizard folder.
3) Restore legacy color scheme for for our DOS DM fans.
4) Add "Tool Tips" display for hidden columns in scrolling views.
5) Add description for model 141, 6100-ZRF6000 NAND.
6) Add Start MPC session support accessible from the Options "Start SIA/MPC
Session"
menu selection.
1)
2)
3)
4)
5)
6)
7)
Include generic load support for dynamic parsers.

Add Summary Text parsing support SearcherFinger logs for scrolling views.
Add non-persistent Save Item Store to Options-Settings menu.
Correct MRU3 NV item definition.
Correct event SD_EVENT_ACTION enumeration text.
Add payload descriptions for events 982-998.
Add UMTS and 1X specific status to the Dynamic Status display.

1)
2)
3)
4)
Integrate new core QXDM:

Improved Item Store
Improved connection state engine
Improved DMI (diagnostic monitor interface)
Add sub-type column to scrolling views.
Improve item type categorization.
QXDM no longer required for RPC/PLT support (now a separate application).

NOTE: Log file Header Status Record change:
This version of QXDM supports changes to the log header requested
by Qualcomm post-processing tools. It is incompatible with all
QCAT 3.X and APEX 3.X versions older than APEX 03.23.01. For backwards
compatibility, check the "Include Deprecated Header Status Record"
checkbox in the Diagnostic Log Items page of the (F5) Logging
Configuration dialog.
1)
2)
No longer include target status records in log file by default.

Add GSM MDSP Feature Set to (F9) Status display
3)
4)
5)
6)
Add message type enumeration text for events 265 and 266.
Remember graph selections in WCDMA AGC display across QXDM sessions.
Add initial Status (Dynamic) display with phone state and CM state
information.
Correctly handle %s string references in Event payload descriptions.
Known Issues
-----------Some UMTS targets do not consistently respond to required diagnostic
header items. This renders the log file unusable for APEX post-processing
analysis. Response behavior is improved by turning on logging only after a
connection to the target has been established.
1)
2)
3)
4)
5)
Log DIAG request encapsulation records in log files (log code 0x1FEA).
Logging now works when started before connecting to a target.
No longer log invalid DIAG response encapsulation record (0x1FF0, 115, 3).
Enforce all or none behavior for IS2K diagnostic log items.
Don't display required diagnostic log items in Logging Config page as they
are not configurable.
6) Correct BSIC formatting for events 430, 434, and 435.
7) Add QVP Application SSID message levels
8) Add enumeration text for RANDOM_ACCESS_ATTEMPT event.
9) Add payload descriptions for QTV buffering events.
10) Add mclog_state property support. Syntax: get_property mclog_state
11) Remove QXDM dependencies on user.qdb.
1)
Move EVENT_GSM_TO_WCDMA_RESELECT_END and EVENT_GSM_TO_WCDMA_HANDOVER_START

to the GSM category. Add payload for QTV events 904-917.
2) Correct problem where QXDM would sometimes crash after failing EFS2 write.
3) Add MSM revision name support to F9 Status.
4) Add additional model names for models 182-194.
5) Add Status (12) diagnostic response to the Diagnostic Log Items list.
6) Support the maximum number of fingers for HDR TA.
7) Add NV items 1019-1056.
8) Correctly plot AGC Tx as long as AGC Tx is transmitting.
9) Correct the display of ESN in F9 Status.
10) Display QXDM by default when no screen coordinates exist in the registry.
1) QXDM no longer remembers invalid screen location when exited while
minimized.
2) Update diagnostic log items on re-connect when logging.
3) Add equip ID log ranges diagnostic log item.
4) Add WCDMA_BLER graphs to WCDMA_AGC display.
5) Correctly categorize recently submitted RF items.
6) Add ID command line option to HSDisplayToEFS sample Perl script.
7) Correct payload for EVENT_GSM_CAMP_ATTEMPT_START.
8) Enforce the using of same color for same traffic channel information in
WCDMA AGC "Blocks Recv" and "Blocks Err" graphs.
1)
2)
3)
4)
Add Streaming Configuration EFS2.0 support

Add GPRS Packet System Information log names.
Correct NV item definition for Equivalent PLMN List.
Stop phone from sending logs on exit.

1)
2)
3)
Add WCDMA DRX Mode log name for log code 0x4004 and mark log code 0x4107
obsolete.
Message level display improvements:
SSIDs with no supported message levels are no longer displayed.
Message levels not in the DB map to 'Unnamed' display string.
Message level display name comes from DB if in the DB.
Add name support for NV items 934-1018.

1)
2)
3)
4)
5)
6)
7)
Add log names for:

0x520F UL AckNack Parameters
GSM\GPRS\RLC
0x5210 DL AckNack Parameters
GSM\GPRS\RLC
0x5218 UI Send PDU
GSM\GPRS\LLC
0x5219 UI Recv PDU
GSM\GPRS\LLC
0x5220 UL TCP Header
GSM\GPRS\SNDCP
0x5221 DL TCP Header
GSM\GPRS\SNDCP
Add events 639-903.
Split the df_query and df_verify commands in df.pl into two separate
files. Also added command line options for each.
Add support for an additional log code (0x4005) for cell reselection.
Add automation interface to support virtual item list view clear/saving.
Also included a perl example.
Add DBEditor support for "log in use" flag in log item table.
Fix QXDM crashing after receiving CoreDump issue.

1)
2)
3)
4)
5)
6)
7)
Add Multi-Mode Static Status display.

F9 accelerator now applies to Multi-Mode display. Old display is still
accessable as "Status" from the pulldown menu.
Event updates:
Add UMTS UMTS CS Data RX/TX Frames log names.
Add 256 BREW events.
Add event EVENT_WCDMA_PS_DATA_RATE.
Add event EVENT_GSM_TO_WCDMA_RESELECT_END.
WCDMA AGC display now plots TxRx Power graph even during IDLE mode when
PA is off.
Move MultiSlot Class NV item to new GPRS category.
DBEditor now runs on systems that do not have MFC70 DLLs.
Correct QXDM automation server OLE registration. Add new
command line interfaces -RegServer / -UnregServer.
Add GPRS extensions installer. To get GPRS extensions, run
getGPRSExtensions from the bin folder where QXDM was installed.

1)
2)
3)
4)
5)
Add event EVENT_ACCESS_ENTRY_HANDOFF.

Add 1x EvDO and AFLT Searcher 2 Parameter log names.
Rewrite Bluetooth display.
Correct the NV rtsp_proxy_server_addr item definition.
No longer corrupt OTA log items in the item store.
6)
7)
8)
Add more ports for GPS connectivity.

Add size-checking during resizing to prevent TA graph from being
resized to invalid sizes.
Update DIP switch settings.

1)
2)
3)
4)
5)
6)
7)
8)
9)
Add Dynamic Feature automation script support.

Add display support for Service Config Ver. 3 log.
Add Qtv log category and sub categories.
Add additional MSM 6250 model names.
Add events:
624 EVENT_PZID_HAT_STARTED
634 EVENT_PZID_HAT_EXPIRED
637 EVENT_PZID_HT_STARTED
638 EVENT_PZID_HT_EXPIRED
Fix TA Graph configuration problems:
Sub grid line resolution bound checking
X axis scale combo box won't allow editing.
Installer now correctly installs required QPST components.
No longer unregister QPST on QXDM uninstall.
Add additional error validation to installer for system DAO360.DLL.

1.
2.
Install QPST components if QPST doesn't exist on target machine.

Use and always update QXDM internal database.
3.
4.
Non QXDM:
QDatabase.exe IDispatch interface is fixed for scripting.
Only update shared qxdm.qdb database if newer than current.

1)
2)
3)
4)
5)
6)
Initial support for Dynamic Feature df_query, df_verify

Add NV items 927-931, 933
Fix MakeHTML -periodic option.
Update User Guide.
Update FTM Runtime display to include legacy FTM features.
Prototype MultiMode Status display.

1)
2)
3)
4)
5)
6)
Add MDI (Multiple Document Interface) support for unlimited views.

Replace old QXDM Property Editor utility with new DBEditor. The
new utility allows users to edit categories, names and comments
for Events and Logs.
Add Runtime FTM display and properties.
Add new gpsOne scripts sensitivity_cc_SA2.scr and sensitivity_cc_noSA2.scr.
Add payload description for WCDMA event 567, EVENT_WCDMA_RL_FAILURE.
Update HDR event enumeration text for Indicator and Name enum types.
1)
2)
3)
Remove the ability to filter events from logging.

Correct QVideophone log item names.
Postpone updating EFS Filestream feature until capabilities are known.

1)
2)
3)
4)
5)
6)
7)
Add new NV items 916-926

Add event names and payloads:
629 EVENT_CM_CALL_EVENT_ORIG
630 EVENT_CM_CALL_EVENT_CONNECT
631 EVENT_CM_CALL_EVENT_END
632 EVENT_CM_ENTER_EMERGENCY_CB
633 EVENT_CM_EXIT_EMERGENCY_CB
634 EVENT_WCDMA_MT_SMS_STATUS
635 EVENT_HDR_SMP_SESSION_CLOSED
636 EVENT_WCDMA_MEMORY_LEAK
Remove CNM_ from WCDMA NAS message event names.
Correct enums for NAS_MESSAGE_SENT/RECEIVED event payloads.
Add additional enumeration text for WCDMA_PAGE_RECEIVED.
Inject 1000ms sleep to reduce load on targets that do not respond
correctly to mode offline request.
Prevent BT logs from flooding QXDM BT Display with short-term patch.
Automation sample script updates
Fix {LogMask} read operation.
Remove obsolete samples.
Add COMPort property to change COM ports.
Syntax:
my $comPort = 4;
$qxdm_app->{COMPort} = $comPort;
Add MSM 6200 rev 3 and 4 hardware revision support.
Fix HDR Pilot Set Display to show correct NSet panel AGE, band class.

Product Release: Includes all updates since last product release (02.07.20).
1)
2)
3)
4)
Correct definitions for GSM gsm/dcn_cal_arfcn NV items.

Renumber log codes for QVideoPhone logs.
Add improved validation and resource checking to installer.
Logger no longer pools diagnostic requests when disconnected, for periodic
diagnostic log responses.

1)
2)
3)
4)
5)
6)
Event updates:
Add event names and descriptions for events 623, 625-628.
Remove unused events 563 and 624.
Add event payload descriptions for NAS (453, 454) events.
Move RRC events to WCDMA catetory.
Move NAS events to UMTS category.
Add base message levels for new SSID QTV Applications.
Update peanalyze.pl and qanalyze2.pl for gpsOne team.
QDatabase now parses events with bitmasks.
Change ploting/legend behavior of WCDMA CM Measurement graph display to
fix legend shuffling problem and incorrect plot color problem.
Fix WCDMA CM Measurement display frame counter problem that resulted in
mysterious multi-lines diagram.
Fix qgraph problem that resulted in incorrect plots when plot is shifted
to the left.
1)
2)
3)
4)
5)
6)
Bit masks are now applied before looking up enums as text for fields that
have both enum text and bit masks.
Add OTA Silk parsing support for OTA messages 0x1004-0x1008.
Correct Events:
Add missing payload for events 526, 557, 558, and 567.
Correct message type enumeration text for RRC MESSAGE events.
Add GPS payload names to formatted text.
Add enumeration text for event EVENT_RANDOM_ACCESS_REQUEST (390).
Correct event names:
EVENT_NAS_MESSAGE_SENT to EVENT_CNM_NAS_MESSAGE_SENT
EVENT_NAS_MESSAGE_RECEIVED to EVENT_CNM_NAS_MESSAGE_RECEIVED
Add log names and categories for Msg/Log Config displays:
1x-RLP category for RLP logs.
RLP Fundicated Rx Frames
RLP Fundicated Tx Frames
Search Triage Info Version 2

1)
Update GSM GPRS log item names for Logging and Message View
configurations.

1)
Add support for saving and loading configurations:

Configuration currently includes the Logging and Message View Config
dialogs, Build Machine Names, Log Annotations, Default Event Filter,
Main window placement, and Active views.
Configuration files have the file extension .DMC (Diagnostic Monitor
Config)".
2)
3)
4)
5)
6)
7)
8)
Add automation support for saving and loading configuration files:

LoadConfig( ConfigFilePath )
SaveConfig( ConfigFilePath )
Add Options-Settings "Display Raw Event Payload" option.
Fix PropEditor crash problem caused by elimination of deprecated tables.
Improve bounds checking when loading user.qdb to avoid locking up QXDM.
Provide work-around for memory access error when disptching blocking calls
through the Property interface.
Change WCDMA-TA behavior for LOG_WCDMA_FINGER_TA_INFO_C (0x4104) to not
display unassigned fingers.
Add events 621, 622.
Add enumeration text for WCDMA RRC Message events.

1)
2)
3)
4)
Add Automation support for WaitEvent(eventID, timeOut).

Add support for targets sending LOG_COREDUMP_C coredump logs.
Synchronize EventID and Diag tables with target event enumeration names.
Update payload for events:
WCDMA_CELL_SELECTED
WCDMA_PAGE_RECEIVED
WCDMA_MAX_RESET
WCDMA_RRC_STATE
And event names:
WCDMA_OUT_OF_SERVICE
GSM_L1_SUBSTATE
Reserve entries for event names with payload:
GPS_SRCH_START
GPS_PPM_PAUSE
GPS_SA_RECEIVED
GPS_VISIT_RESPONSE
GPS_DSP_CHANNEL_START
GPS_DSP_CHANNEL_DONE
GPS_SRCH_LARGE_DOPP_WIN
GPS_SRCH_EXCEPTION
GPS_SRCH_HW_POLLING1
GPS_SRCH_HW_POLLING2
GPS_PGI_ACTION_PROCESS
GPS_GSC_ACTION_PROCESS
GPS_PGI_ABORT
GPS_GSC_ABORT
GPS_PD_FIX_START
GPS_PD_FIX_END
GPS_DATA_DOWNLOAD_START
GPS_DATA_DOWNLOAD_END
GPS_PD_SESSION_START
GPS_FTEST_FIX_START
GPS_FTEST_FIX_END
GPS_UAPDMS_STATE_CHANGE
1)
2)
3)
F9 Status Display updates:

Fix "disappearing" Active Set fields.
Recognize additional MSM 6200 hardware (0xF270, 0xF370).
Increase frequency refresh to 500ms.
Add new GPS events 572, 573, and 577-618.
EVENT_WCDMA_INTER_RAT_HANDOVER_START now displays Activation and
Receive CFN correctly. Correct EVENT_WCDMA_TO_GSM_RESELECTION_END
payload offsets. Correct payload for EVENT_WCDMA_TO_GSM_RESELECTION_START.

1)
2)
3)
4)
5)
6)
Change General TA screen to handle more than four fingers.

Mark WCDMA Power Control log name 0x4001 obsolete and replace with 0x4010.
Update WCDMA events 447, 448, 515, 528, 531, and 532 to match ICD.
Fix put_property property writes (broken in 2715).
Fix an outstanding PC polling packet issue resulting in invalid
post-processsing tool output.
Add event names:
547 EVENT_GSM_AMR_STATE_CHANGE
548 EVENT_GSM_RATSCCH_IN_DTX
549 EVENT_GSM_FACCH_IN_DTX
550 EVENT_GSM_FACCH_AND_RATSCCH_COLLISION
551 EVENT_GSM_FACCH_AND_SID_UPDATE_COLLISION
552 EVENT_GSM_RATSCCH_AND_SID_UPDATE_COLLISION
553 EVENT_GSM_RATSCCH_CMI_PHASE_CHANGE
554 EVENT_GSM_RATSCCH_REQ_ACT_TIMER_EXPIRY
555 EVENT_GSM_RATSCCH_ACK_ACT_TIMER_EXPIRY
556 EVENT_GSM_AMR_CMC_TURNAROUND_TIME
557 EVENT_CM_PLMN_FOUND
558 EVENT_CM_SERVICE_CONFIRMED
559 EVENT_GPRS_MAC_CAMPED_ON_CELL
560 EVENT_GPRS_LLC_READY_TIMER_START
561 EVENT_GPRS_LLC_READY_TIMER_END
562 EVENT_WCDMA_PHYCHAN_ESTABLISHED
563 EVENT_WCDMA_UL_DL_NAS_SIGNALLING
564 EVENT_WCDMA_CAMPED_FREQUENCY
565 EVENT_WCDMA_PAGE_RECEIVED
566 EVENT_WCDMA_SEND_KEY
567
568
569
570
571
572
573
574
575
576
EVENT_WCDMA_RL_FAILURE
EVENT_WCDMA_MAX_RESET
EVENT_WCDMA_CALL_SETUP
EVENT_WCDMA_CALL_DROPPED
EVENT_WCDMA_RRC_STATE
EVENT_WCDMA_URNTI
EVENT_WCDMA_DCH_FACH_TRANSITION
EVENT_MEDIA_PLAYER_START
EVENT_MEDIA_PLAYER_STOP
EVENT_MEDIA_PLAYER_SEEK

1)
2)
3)
4)
5)
6)
7)
Support status bar message counts for extended debug messages.

Add new enum for HDR MSG Events (HeaderOnlyMsg).
Improve startup time by optimizing the property interface.
Add runtime check for DAO360 required version.
F9 Status display now shows phone state for HDR targets. (27451)
Annotation diagnostic log item is working again.
No longer crash on receipt of invalid debug messages that result in
buffer overruns.

1)
2)
Improve QXDM database startup time by a factor of 10.

Improve plastic RPC initialization when connecting to a target.
Initialization now occurs after a DIAG version response has been received
to give the initial RPC request a greater chance of being acknowledged by
the target.
3) Add support for QPST Serial Server notification to catch target disconnects
independant of the QXDM activity timeout.
4) Update new message levels for GSM GPRS debug message SSIDs.
MSG_SSID_GSM_GPRS_GPL1
MSG_SSID_GSM_GPRS_GMAC
MSG_SSID_GSM_GPRS_GRR
MSG_SSID_GSM_GPRS_GRLC
MSG_SSID_GSM_GPRS_GCOMMON
5) Add description for WCDMA log 0x4003 (WCDMA Finger Info For TA).
6) Update HDR NSet display to show the Age field.
7) Add additional enhancements to the Profiling Display:
Improve formatting.
Display Slice Type and Total Task Number in main part of display.
Hide the Memory Status page (not supported).
Highlight rows with SP > SL.
Provide sorting by column.
8) QXDM no longer locks up under certain conditions when the HDR Forward
Statistics display is being used.
9) Update gpsOne .scr script files.
10) Add NV items 910-915:
NV_PPP_USER_ID_I
NV_MULTISLOT_CLASS_I
NV_NON_DRX_TIMER_I
NV_SPLIT_PAGING_CYCLE_I
NV_UIM_PREF_PROTOCOL_I
NV_WCDMACS_SYNC_TEST_APP_ENABLED_I
11) Add support for logging CM State Info diagnostic response.
12) Display dropped message errors for extended debug messages.
1)
2)
3)
Add support for multiple SSID ranges for extended debug messages.
Profiling display now correctly shows %CPU for tasks.
Add ability to log all PPP frame types using PPP Dump (Alt+P).

1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
(F9) Status Display:

Use CM Call State info packet to help determine mode the phone is in.
Only request GenTA logs when needed.
Add Event category support for Message and Logging configuration.
Move settings related to (F1) Message view from Options-Settings dialog to
(Ctrl+F5) Message Configuration dialog.
Correct PC time stamp in DM-generated version record.
Add UMTS Cell Reselection graph display. Provides capability to
simultaneously plot 8 different power levels and corresponding ranks.
Profiling view:
Display %CPU utilization.
Enable profiling when activated.
Un-register logs and disable profiling when removed.
Add Okay button to update profiling settings when Okay is pressed.
Change mode OFFLINE_FTM syntax to mode FTM.
Correct model names for Leopard models 115-123.
Installer no longer un-installs shared databases.
QXDM-generated Status Snapshot 1FF7 record is now stripped of command code
(from DIAG_STATUS_SNAPSHOT_F response) for backwards compatibility.
In the WCDMA GSM CM Measurements display, fix the problem where duplicate
ARFCN appears in the list when the RSSI is the same for two or more ARFCNs.
Extended debug message support for SSID build mask now works.
Display QXDM version on the splash screen on QXDM startup.
Insure that unknown events are not filtered from views.
Update gpsOne test scripts for 6050 targets.
(F4) Memory Viewer writes now work as designed.
Add extended message and Subsystem IDs names for Message and Logging
configuration.
PPP Dump logging works again (Alt+P).
Add Event descriptions:
PPP events MIP, TCP, RLP, PPP
START_FWD_SUPP_BURST_ASSIGN
START_REV_SUPP_BURST_ASSIGN
REV_FCH_GATING_IN_USE
EVENT_CAMERA_EXIF_FAILED
EVENT_CAMERA_VIDEO_FAILED
EVENT_CAMERA_NO_SENSOR
EVENT_CAMERA_ABORT
EVENT_WCDMA_L1_SUSPEND
EVENT_WCDMA_L1_RESUME
EVENT_WCDMA_L1_STOPPED
EVENT_WCDMA_TO_WCDMA_RESELECTION_START
EVENT_WCDMA_TO_GSM_RESELECTION_START
EVENT_WCDMA_TO_GSM_RESELECTION_L1_END
EVENT_WCDMA_TO_WCDMA_RESELECTION_END
EVENT_WCDMA_RACH_ATTEMPT
EVENT_START_FWD_SUPP_BURST_ASSIGN
EVENT_START_REV_SUPP_BURST_ASSIGN
EVENT_REV_FCH_GATING_IN_USE
EVENT_CM_BLOCK_HDR_ORIG_DURING_GPS
EVENT_CM_ALLOW_HDR_ORIG_DURING_GPS

1)
QXDM no longer deadlocks for NV items that return DIAG success, but with
status field errors.

through the NV Item display.
2) WCDMA L1 State display shows L1State events once again.
3) The WCDMA GSM CM Measurements display now maintains unique colors for
each ARFCN.
4) Add Keypad display view.
5) Modify the WCDMA SIR Estimate and Tx AGC Accum plots of WCDMA AGC display
to support new Power control packet (0x4010).
6) HDR pilot sets window now updates pilots correctly.
7) Add MAC address and MSM5500 1.4 (0xF024) license support.
8) Add AppVersion() to automation interface.
9) Update event descriptions:
LSM_STATE_CHANGE and NAK_ABORT.
EVENT_CM_MODE_PREF,
/* Payload: 4 bytes */
EVENT_CM_BAND_PREF,
EVENT_CM_ROAM_PREF,
EVENT_CM_SRV_DOMAIN_PREF,
EVENT_CM_GW_ACQ_ORDER_PREF,
EVENT_CM_HYBRID_PREF,
Add additional enums LMAC_CC_MISSED and LMAC_RESELECT for HDR events.
10) Update Log names:
Unhide the first 20 WCDMA log items (0x4000-0x4014).
Mark Ciphering log (0x4153) reserved.
11) Add NV Item display support for items:
NV_TRK_LO_ADJ_VS_TEMP_I (RF_CDMA)
NV_ROT_FREQ_VS_TEMP_I (RF_CDMA)
NV_SMS_GW_BEARER_PREF_I (Display)
1. Add WCDMA-TA display support for 0x4003 log packet.
2. Enhance WCDMA-TA Display to display "finger-state" information:
Append "N" if finger is assigned to neighbor cell.
3. Upgrade QXDM databases to use DAO360.
4. Move QXDM databases to common folder to be shared with other tools:
C:\Program Files\Qualcomm\Shared
5) Add script support for additional mode LPM (low power mode) command for
DIAG_CONTROL_F. Syntax: mode lpm
6) Duplicate logs are no longer getting logged for targets that get reset
during logging.
1) Rx_agc is now treated as a signed integer in the TxRxPower display,
2) Correct range check for DL and UL Timeslots in the GPRS Air Interface
Summary display.
3) Errors are now reported when old-style message level is out of range.
4) Add support to scripting interface for additional DIAG_CONTROL_F online and
offline_ftm commands.
5) EFS file stream configuration now also supports extended debug messages.
6) WCDMA GSM CM Measurements graph:
Extend the plot range to accept ARFCN powers to -120 dB
Map line color to ARFCN in legend regardless of BSIC identification.
1) Update GSM log names:
New:
0x5079 GSM L1 Enhanced Message Metrics
2)
3)
4)
5)
6)
Obsolete:
0x506B GSM L1 Message Metrics
Add payload definitions for GPRS events 509-512.
Add display support for NV items:
GSM_LOCIGPRS
GSM_KCGPRS
ERR_FATAL_OPTIONS
WCDMA AGC display changes:
Hide 'Adj Power' graph of WCDMA AGC display, since it is not used anymore.
Add 'Tx AGC Accum' trace from uplink downlink power control packet.
Add the ability to add/remove graphs on WCDMA AGC display using popup menu.
Property interface no longer checks for a valid build ID when testing if
connected to a phone.
Change behavior of logging view and message view:
Each configuration is updated immediately on the phone when changed.
Views are completely independent of each other.

1) Add IDs for Camera events, NAS, RRC, WCDMA_LAYER1_PRACH,
WCDMA_LAYER1_MEASUREMENT, and MOBILITY_MANAGEMENT_STATE_CHANGE events.
2) Update log names:
Added:
0x7008 MMGPS Report RF status
0x7009 MMGPS Report Frequency Calibration
0x5076 GSM TxLev/Timing Advance
0x5078 GSM PDM Adjust
0x5082 GSM Monitor Bursts
0x5083 GSM Ncell SCH Burst Metrics
0x5084 GSM Ncell SCH Message Metrics
0x5085 GSM Ncell BCCH Burst Metrics
0x5086 GSM Ncell BCCH Message Metrics
Mark as obsolete:
0x5074 GSM PDM ADJ
0x5077 GSM L1 Neighbor BCCH Decode
0x5408 GSM Monitor Bursts
0x5410 SACCH Reports Rev 0
0x5411 SACCH Reports Rev 1
Renamed:
0x5065 GSM L1 FCCH Acquisition
0x5066 GSM L1 SCH Acquisition
3) Enable configuration of extended debug messages through the Message View
Configuration (Ctrl+F5).
4) Enhancements to the CM Measurement display:
1. Fix the graph colors to appear properly in the legend text.
2. Make the graph to scroll rather than refresh every 15 seconds.
3. Reload the WCDMA CM GSM measurement object on phone disconnect.
5) WCDMA TA graph enhancements:
1. No longer display un-assigned fingers in the WCDMA TA graph.
2. Suffix lock_status field value in main TA graph.
---------------------------------------------------------------------3. KNOWN ISSUES
Installation:
No known issues.
----------------------------------------------------------------------
Copyright (c) 2000-2004, QUALCOMM Incorporated

All rights reserved.

Readme

Uploaded by

Copyright:

Available Formats

Readme

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Readme

Uploaded by

Copyright:

Available Formats

QXDM Version 3.09.

Prior Release (Version 3.09.18) 03/06/2006

Fix broken CDMA OTA hint tracking from EVENT_P_REV_IN_USE_CHANGE

0x116A "QTV RTSP Server Response"

1056 MFLO OIS State

Upgrade to ISF version 3 file format. This is nearly identical to V2 except

Prior Release (Version 3.09.16) 02/14/2006

a) Upgrade to SILK version 8.48

Add MediaFLO displays:

Prior Release (Version 3.09.12) 01/24/2006

Add 'HDR Rev. A Reverse Link Metrics' display

Prior Release (Version 3.09.11) 01/09/2006

"HDR Rev. A Reverse Link Throughput"

Prior Release (Version 3.09.10) 12/22/2005

0x525D GSM G2W Searcher Step 1

0x127F 1xEV-DO Rev A RMAC3 T2P Resource

Prior Release (Version 3.09.06) 11/09/2005

Prior Release (Version 3.09.05) 11/01/2005

ISF settings are now persistent (File->Item Store Settings)

Prior Release (Version 3.09.03) 10/28/2005

0x11C1 QTV Command Logging

0x1193 1xEV-DO Rev. A Multi-User Packet Forward Statistics

Enhance View Bar's dropdown menu:

Prior Release (Version 3.09.001) 10/20/2005

Correct behavior of 'Save Items' menu command broken in QXDM 3.09.00.

Prior Release (Version 3.09.00) 09/30/2005

Introduce Version 2 of ISF file format featuring less indexing overhead

[13/1] GPS/End Session Request/Response

Add 'CDMA Paging Message Error Rate' display

Prior Release (Version 3.08.03) 09/09/2005

QTV Bit Rate Graphs:

0x1330 QDJ Dequeue

Update 'WCDMA TA' display:

Add 'CDMA Pilot Information' display

9 Word Output Request/Response

Replace Legacy Scripting Interface with database-derived solution:

Add support for array sizes based on simple expressions

Replace InstallShield Installer with new Windows Installer

Add NV items 3477-3494

NOTE: QXDM no longer attempts to connect to a COM port read in

Add Core Automation server (DMCoreAutomation.ItemStoreFiles) for

Add 'HDR Multi-Flow RLP Statistics' display

Prior Release (Version 3.07.10) 06/02/2005

Ensure Enumerated Types have non-empty names

Update 'HDR Rev. A Single-User Forward Statistics Summary' view to support

Prior Release (Version 3.07.05) 05/02/2005

Column widths are now persistent in scrolling views

Add parsing support for Subsystem Dispatch V2 Delayed Response

0x107B 1xEV-DO Traffic Channel Assignment

Prior Release (Version 3.07.02) 04/26/2005

Add 'WCDMA Active Set PSC Strength' display

0x103E Bluetooth General

Prior Release (Version 3.07.01) 04/14/2005

Enhance cursor feature for graph displays:

Add enums for Events to include SM OTA messages:

Port/enhance all CDMA 'TA' related graphs to new graph control:

Correct enumerations for NV Items: 3032, 3204, 3212

Prior Release (Version 3.06.11) 03/18/2005

0x7138 UMTS UE Dynamic ID